Search Results

Search found 3148 results on 126 pages for 'angularjs scope'.

Page 52/126 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

• Intel I217LM ethernet controller not detected by Ubuntu 12.04LTS

  - by Alexandr Kurilin

  My last installation of Ubuntu 12.04 on a machine using an ASUS Q87M-E motherboard with an Intel I217LM Ethernet controller has failed to detect the ethernet card. The only thing displayed by ifconfig -a is the loopback. I double-checked in the BIOS, and the controller should be online. $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lspci 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation Lynx Point KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation Device 153a (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point HD Audio Controller (rev 04) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-Port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) $ lsmod Module Size Used by vesafb 13844 1 snd_hda_codec_realtek 224173 1 arc4 12529 2 joydev 17693 0 usbhid 47238 0 hid 99636 1 usbhid rfcomm 47604 0 rt73usb 31735 0 crc_itu_t 12707 1 rt73usb rt2x00usb 20808 1 rt73usb rt2x00lib 55326 2 rt73usb,rt2x00usb mac80211 506862 2 rt2x00usb,rt2x00lib cfg80211 205774 2 rt2x00lib,mac80211 eeepc_wmi 13109 0 bnep 18281 2 asus_wmi 24456 1 eeepc_wmi sparse_keymap 13890 1 asus_wmi psmouse 97485 0 bluetooth 180153 10 rfcomm,bnep ppdev 17113 0 snd_hda_intel 33719 6 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi serio_raw 13211 0 snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq parport_pc 32866 1 snd 79041 21 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device video 19651 0 soundcore 15091 1 snd wmi 19256 1 asus_wmi snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp $ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1091 errors:0 dropped:0 overruns:0 frame:0 TX packets:1091 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:80048 (80.0 KB) TX bytes:80048 (80.0 KB) wlan0 Link encap:Ethernet HWaddr 00:fd:07:91:a8:b9 inet addr:172.16.42.4 Bcast:172.16.42.255 Mask:255.255.255.0 inet6 addr: fe80::2fd:7ff:fe91:a8b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:56644 errors:0 dropped:0 overruns:0 frame:0 TX packets:36417 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:85270918 (85.2 MB) TX bytes:3413849 (3.4 MB) additionally, running sudo lshw -C network returns: *-network UNCLAIMED description: Ethernet Controller [...] I'm pretty stumped at this point. This doesn't sound like a very uncommon ethernet controller and I figured it would be picked up by the system. Does anybody have advice for how to deal with this? Anything specific I should look into to figure out what could be causing this? Edit: It seems that following the guide on the Intel e1000e drivers page allowed the card to start working. Is this a real fix or is there a better way?

  Read the article

• When to implement: Together with or after the source product?

  - by Jeremy Oosthuizen

  Somebody recently relayed a prospect's question to me: How hard would it be to implement OUBI after the source product (CC&B, WAM or NMS) has already been implemented? Fact is that MOST non-OUBI Data Warehouse / Business Intelligence implementations take place after the source application(s) are in place and hopefully stable. If an organization decides that they need better reporting and management information, then the logical path (see The Data Warehouse Institute's Data Warehouse Maturity Model) is to a Data Warehouse -- no matter when their last applications were implemented. If there is a pre-built Data Warehouse for their specific application, or even for the desired business process in their industry, they're in luck. Else they have to design and build from scratch, using a toolset. The implementation of a toolset is unlike the implementation of OUBI which, like OBI Apps, contain pre-built ETL routines and user content. Much has been written before about the advantages of that. So, because OUBI is designed specifically for Oracle Utilities transactional products, we often implement them in parallel -- with OUBI lagging a little behind by necessity, like Reporting. Customers know from the start they're going to need the solution, and therefore purchase the products at the same time. My biggest argument FOR a parallel installation/implementation of OUBI with the source product is two-fold: - There could be things (which is the technical term for data elements) that customers figure out they need when implementing OUBI, which are often easier added to the source product's implementation project, than to add later; - OUBI's ETL often points out errors (severe or not) with converted data, which are easier to fix during the source product's implementation project, or it may even be impossible to fix afterwards. The Conversion routines sometimes miss these errors, because the source system can live with the not-quite-perfect converted data. If the data can't be properly extracted, i.e. the proper Dimensions linked to the Facts, then it can't get into OUBI. That means it can't be analyzed effectively along with the rest of the organization's data. Then there is also the throw-away-work argument, which may be significant. The operational / transactional system cannot go live without reports on Day 1. A lot of those reports would be taken care of by the implementation of OUBI. If OUBI is implemented after go-live, those reports STILL have to be built during the source product's implementation project, but they become throw-away after the OUBI implementation. I have sometimes been told that it is better to implement OUBI after the source product, because it cuts down on scope and risk for the source product's implementation project. All I can say to that, is bah humbug. No, seriously, given the arguments above, planning has to include the OUBI implementation and it has to be managed properly -- just like any other implementation. If so, it should not add any risk and it should be included in the scope from the start. The answer to the prospect's question is therefore that it is not that much more difficult; after all, most DW/BI implemenations are done like that. They just have to consider the points above.

  Read the article

• Reconciling the Boy Scout Rule and Opportunistic Refactoring with code reviews

  - by t0x1n

  I am a great believer in the Boy Scout Rule: Always check a module in cleaner than when you checked it out." No matter who the original author was, what if we always made some effort, no matter how small, to improve the module. What would be the result? I think if we all followed that simple rule, we'd see the end of the relentless deterioration of our software systems. Instead, our systems would gradually get better and better as they evolved. We'd also see teams caring for the system as a whole, rather than just individuals caring for their own small little part. I am also a great believer in the related idea of Opportunistic Refactoring: Although there are places for some scheduled refactoring efforts, I prefer to encourage refactoring as an opportunistic activity, done whenever and wherever code needs to cleaned up - by whoever. What this means is that at any time someone sees some code that isn't as clear as it should be, they should take the opportunity to fix it right there and then - or at least within a few minutes Particularly note the following excerpt from the refactoring article: I'm wary of any development practices that cause friction for opportunistic refactoring ... My sense is that most teams don't do enough refactoring, so it's important to pay attention to anything that is discouraging people from doing it. To help flush this out be aware of any time you feel discouraged from doing a small refactoring, one that you're sure will only take a minute or two. Any such barrier is a smell that should prompt a conversation. So make a note of the discouragement and bring it up with the team. At the very least it should be discussed during your next retrospective. Where I work, there is one development practice that causes heavy friction - Code Review (CR). Whenever I change anything that's not in the scope of my "assignment" I'm being rebuked by my reviewers that I'm making the change harder to review. This is especially true when refactoring is involved, since it makes "line by line" diff comparison difficult. This approach is the standard here, which means opportunistic refactoring is seldom done, and only "planned" refactoring (which is usually too little, too late) takes place, if at all. I claim that the benefits are worth it, and that 3 reviewers will work a little harder (to actually understand the code before and after, rather than look at the narrow scope of which lines changed - the review itself would be better due to that alone) so that the next 100 developers reading and maintaining the code will benefit. When I present this argument my reviewers, they say they have no problem with my refactoring, as long as it's not in the same CR. However I claim this is a myth: (1) Most of the times you only realize what and how you want to refactor when you're in the midst of your assignment. As Martin Fowler puts it: As you add the functionality, you realize that some code you're adding contains some duplication with some existing code, so you need to refactor the existing code to clean things up... You may get something working, but realize that it would be better if the interaction with existing classes was changed. Take that opportunity to do that before you consider yourself done. (2) Nobody is going to look favorably at you releasing "refactoring" CRs you were not supposed to do. A CR has a certain overhead and your manager doesn't want you to "waste your time" on refactoring. When it's bundled with the change you're supposed to do, this issue is minimized. The issue is exacerbated by Resharper, as each new file I add to the change (and I can't know in advance exactly which files would end up changed) is usually littered with errors and suggestions - most of which are spot on and totally deserve fixing. The end result is that I see horrible code, and I just leave it there. Ironically, I feel that fixing such code not only will not improve my standings, but actually lower them and paint me as the "unfocused" guy who wastes time fixing things nobody cares about instead of doing his job. I feel bad about it because I truly despise bad code and can't stand watching it, let alone call it from my methods! Any thoughts on how I can remedy this situation ?

  Read the article

• how do i fix this: the networking and wireless are enabled. but list of networks under wireless networks not available

  - by Ayesha Ahmad

  i started working with ubuntu 11.10 last year. i upgraded to 12.04 a week back. since then i have had all sorts of problems with network connection. first had to install the new driver. the hardware switch somehow got disabled then the above problem arrived. even tho the options are all enabled, the OS is not able to detect scan available network connections. also i have to bring to notice that once in a while it does get connected, can not explain how it happens. I want to fix this problem once and for all. please help. ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:51:b3:c8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:44 eth1 Link encap:Ethernet HWaddr 1c:65:9d:67:d5:e1 inet6 addr: fe80::1e65:9dff:fe67:d5e1/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:170 TX packets:0 errors:27 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:344 errors:0 dropped:0 overruns:0 frame:0 TX packets:344 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20336 (20.3 KB) TX bytes:20336 (20.3 KB) lshw -c network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 1c:65:9d:67:d5:e1 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: f0:4d:a2:51:b3:c8 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:196 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) I hope this information is of some help.

  Read the article

• Save the Date - Oracle Partner Community Forum: Exadata, Exalogic and Manageability, Vienna, 23-24 April 2013

  - by Javier Puerta

  Hardware and Software Engineered to Work Together .Ritu { font-family: Arial, Helvetica, sans-serif; } .Ritu { font-family: Arial, Helvetica, sans-serif; } .Ritu { font-family: Arial, Helvetica, sans-serif; } body,td,th { font-family: Arial, Helvetica, sans-serif; font-size: x-small; } .color { color: #F00; } .c { color: #F00; } .c { color: #F00; } .c { color: #000; font-size: xx-small; } .c a { color: #F00; } .c { color: #F00; } .cl { color: #F00; } .b { color: #000; font-size: xx-small; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .c { color: #F00; font-size: small; } .b { font-weight: bold; font-size: x-small; } .c { color: #F00; font-size: x-small; } .clr { color: #F00; } .c { color: #F00; } inside the Click Here The order you must follow to make the colored link appear in browsers. If not the default window link will appear 1. Select the word you want to use for the link 2. Select the desired color, Red, Black, etc 3. Select bold if necessary ___________________________________________________________________________________________________________________ Templates use two sizes of fonts and the sans-serif font tag for the email. All Fonts should be (Arial, Helvetica, sans-serif) tags Normal size reading body fonts should be set to the size of 2. Small font sizes should be set to 1 !!!!!!!DO NOT USE ANY OTHER SIZE FONT FOR THE EMAILS!!!!!!!! ___________________________________________________________________________________________________________________ -- Oracle PartnerNetwork | Account | Feedback SAVE THE DATE ORACLE PARTNER COMMUNITY FORUM: EXADATA, EXALOGIC AND MANAGEABILITY 23-24 APRIL 2013, VIENNA, AUSTRIA The 2013 event expands its scope to cover all the building blocks of the Cloud infrastructure: Exadata, Exalogic and Manageability! Dear partner I am delighted to announce the 2013 edition of the Exadata, Exalogic and Manageability Partner Community Forum for EMEA partners which will take place in Vienna, Austria, on April 23-24, 2013. After the experience of last year where we ran a joint Exadata and Manageability event, we received requests from many of you to add also Exalogic to the scope of the forum, and this way to cover the complete infrastructure architecture on the Exa platform. The continued market adoption of Exadata and Exalogic is being paralleled by a growth in the rate of projects sold and implemented by partners. Sharing customer cases and best-practices presented by other partners constitutes the core of this event. If you want to present an experience of your company around Exadata, Exalogic or Manageability that can be a learning experience for other partners, we still have some slots in the agenda. (Please contact Javier Puerta if you want to present.) Attending the Community Forum you will also have the opportunity to get Oracle’s insight on new products and market trends. And, of course, interact with the Oracle executives responsible for the Exadata, Exalogic and Manageability business. The atmosphere of beautiful Vienna will be the scenario of the event. Detailed venue and hotel booking information will be sent to you in January. Don't miss out on attending this key event! Save the date now - 23 & 24 April 2013, and watch out for your formal invitation coming soon. Kind regards, Javier Puerta Core Technology Partner Programs, Oracle EMEA E-Mail: [email protected] Jürgen Kress SOA Partner Adoption Oracle EMEA E-Mail: [email protected] Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact PBC | Legal Notices and Terms of Use | Privacy Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States

  Read the article

• Save the Date - Oracle Partner Community Forum: Exadata, Exalogic and Manageability, Vienna, 23-24 April 2013

  - by Javier Puerta

  Hardware and Software Engineered to Work Together .Ritu { font-family: Arial, Helvetica, sans-serif; } .Ritu { font-family: Arial, Helvetica, sans-serif; } .Ritu { font-family: Arial, Helvetica, sans-serif; } body,td,th { font-family: Arial, Helvetica, sans-serif; font-size: x-small; } .color { color: #F00; } .c { color: #F00; } .c { color: #F00; } .c { color: #000; font-size: xx-small; } .c a { color: #F00; } .c { color: #F00; } .cl { color: #F00; } .b { color: #000; font-size: xx-small; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .c { color: #F00; font-size: small; } .b { font-weight: bold; font-size: x-small; } .c { color: #F00; font-size: x-small; } .clr { color: #F00; } .c { color: #F00; } inside the Click Here The order you must follow to make the colored link appear in browsers. If not the default window link will appear 1. Select the word you want to use for the link 2. Select the desired color, Red, Black, etc 3. Select bold if necessary ___________________________________________________________________________________________________________________ Templates use two sizes of fonts and the sans-serif font tag for the email. All Fonts should be (Arial, Helvetica, sans-serif) tags Normal size reading body fonts should be set to the size of 2. Small font sizes should be set to 1 !!!!!!!DO NOT USE ANY OTHER SIZE FONT FOR THE EMAILS!!!!!!!! ___________________________________________________________________________________________________________________ -- Oracle PartnerNetwork | Account | Feedback SAVE THE DATE ORACLE PARTNER COMMUNITY FORUM: EXADATA, EXALOGIC AND MANAGEABILITY 23-24 APRIL 2013, VIENNA, AUSTRIA The 2013 event expands its scope to cover all the building blocks of the Cloud infrastructure: Exadata, Exalogic and Manageability! Dear partner I am delighted to announce the 2013 edition of the Exadata, Exalogic and Manageability Partner Community Forum for EMEA partners which will take place in Vienna, Austria, on April 23-24, 2013. After the experience of last year where we ran a joint Exadata and Manageability event, we received requests from many of you to add also Exalogic to the scope of the forum, and this way to cover the complete infrastructure architecture on the Exa platform. The continued market adoption of Exadata and Exalogic is being paralleled by a growth in the rate of projects sold and implemented by partners. Sharing customer cases and best-practices presented by other partners constitutes the core of this event. If you want to present an experience of your company around Exadata, Exalogic or Manageability that can be a learning experience for other partners, we still have some slots in the agenda. (Please contact Javier Puerta if you want to present.) Attending the Community Forum you will also have the opportunity to get Oracle’s insight on new products and market trends. And, of course, interact with the Oracle executives responsible for the Exadata, Exalogic and Manageability business. The atmosphere of beautiful Vienna will be the scenario of the event. Detailed venue and hotel booking information will be sent to you in January. Don't miss out on attending this key event! Save the date now - 23 & 24 April 2013, and watch out for your formal invitation coming soon. Kind regards, Javier Puerta Core Technology Partner Programs, Oracle EMEA E-Mail: [email protected] Jürgen Kress SOA Partner Adoption Oracle EMEA E-Mail: [email protected] Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact PBC | Legal Notices and Terms of Use | Privacy Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States

  Read the article

• Oracle MDM Maturity Model

  - by David Butler

  A few weeks ago, I discussed the results of a survey conducted by Oracle’s Insight team. The survey was based on the data management maturity model that the Oracle Insight team has developed over the years as they analyzed customer IT organizations to help them get more out of everything they already have. I thought you might like to learn more about the maturity model itself. It can help you figure out where you stand when it comes to getting your organizations data management act together. The model covers maturity levels around five key areas: Profiling data sources; Defining a data strategy; Defining a data consolidation plan; Data maintenance; and Data utilization. Profile data sources: Profiling data sources involves taking an inventory of all data sources from across your IT landscape. Then evaluate the quality of the data in each source system. This enables the scoping of what data to collect into an MDM hub and what rules are needed to insure data harmonization across systems. Define data strategy: A data strategy requires an understanding of the data usage. Given data usage, various data governance requirements need to be developed. This includes data controls and security rules as well as data structure and usage policies. Define data consolidation strategy: Consolidation requires defining your operational data model. How integration is to be accomplished. Cross referencing common data attributes from multiple systems is needed. Synchronization policies also need to be developed. Data maintenance: The desired standardization needs to be defined, including what constitutes a ‘match’ once the data has been standardized. Cleansing rules are a part of this methodology. Data quality monitoring requirements also need to be defined. Utilize the data: What data gets published, and who consumes the data must be determined. How to get the right data to the right place in the right format given its intended use must be understood. Validating the data and insuring security rules are in place and enforced are crucial aspects for full no-risk data utilization. For each of the above data management areas, a maturity level needs to be assessed. Where your organization wants to be should also be identified using the same maturity levels. This results in a sound gap analysis your organization can use to create action plans to achieve the ultimate goals. Marginal is the lowest level. It is characterized by manually maintaining trusted sources; lacking or inconsistent, silo’d structures with limited integration, and gaps in automation. Stable is the next leg up the MDM maturity staircase. It is characterized by tactical MDM implementations that are limited in scope and target a specific division.  It includes limited data stewardship capabilities as well. Best Practice is a serious MDM maturity level characterized by process automation improvements. The scope is enterprise wide. It is a business solution that provides a single version of the truth, with closed-loop data quality capabilities. It is typically driven by an enterprise architecture group with both business and IT representation.   Transformational is the highest MDM maturity level. At this level, MDM is quantitatively managed. It is integrated with Business Intelligence, SOA, and BPM. MDM is leveraged in business process orchestration. Take an inventory using this MDM Maturity Model and see where you are in your journey to full MDM maturity with all the business benefits that accrue to organizations who have mastered their data for the benefit of all operational applications, business processes, and analytical systems. To learn more, Trevor Naidoo and I have written the Oracle MDM Maturity Model whitepaper. It’s free, so go ahead and download it and use it as you see fit.

  Read the article

• Slow wired internet connection on Realtek RTL8168-8111 (Rev 6)

  - by Mark

  I keep on seeing issues people are having with their wireless. I am having an issue with being wired into my router. I installed Ubuntu 11.10 the other day, on my custom PC. The motherboard I have installed on this PC is an ASUS P8H61-M. The issue I am having is with my speed. I have a dual boot, windows 7 and the new Ubuntu. On my Windows install I am getting test speeds from Speakeasy at 17Mbps and actual downloads around 2-3MB/s. With Ubuntu, I am getting test speeds from Speakeasy at 1.14Mbps and actual downloads around 60KB/s. I have disabled IPv6 and am no using GoogleDNS for my DNS, but it hasn't resolved the issue. I have scanned my router (WRT54GS Linksys) to disable IPv6 connections, and I am not seeing any option for that. I cannot figure out why I am getting such sluggish internet connection. Any help to resolve would be great! I performed an iconfig -a with these results: mark@Mark-ASUS:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr f4:6d:04:d1:2c:4e inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fed1:2c4e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:21888 errors:0 dropped:21888 overruns:0 frame:21888 TX packets:21068 errors:0 dropped:90 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26348337 (26.3 MB) TX bytes:2217140 (2.2 MB) Interrupt:46 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:952 (952.0 B) TX bytes:952 (952.0 B) My specs are: mark@Mark-ASUS:~$ sudo lspci -nn 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) 06:00.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1080] (rev 01) udev information: KERNEL[11.351405] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 UDEV [11.363905] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 ID_VENDOR_FROM_DATABASE=Realtek Semiconductor Co., Ltd. ID_MODEL_FROM_DATABASE=RTL8111/8168B PCI Express Gigabit Ethernet controller ID_BUS=pci ID_VENDOR_ID=0x10ec ID_MODEL_ID=0x8168 ID_MM_CANDIDATE=1 dmesg information: [ 2.855982] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.856366] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000064c000, f4:6d:04:d1:2c:4e, XID 0c900800 IRQ 46 [ 12.540956] r8169 0000:04:00.0: eth0: link down [ 12.540961] r8169 0000:04:00.0: eth0: link down [ 12.541173] ADDRCONF(NETDEV_UP): eth0: link is not ready I took out a lot of information that did not pertain to eth0, because the previous edits wouldn't save. If I need any more information, let me know. I would love to get this resolved. The other issue I am noticing is sometimes my connection disconnects all together, for about a minute, then it reconnects.

  Read the article

• Schizophrenic Ubuntu 12.10-12.04: Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to getit to work?

  - by zewone

  I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686  Any help much appreciated... Thanks, Philippe

  Read the article

• Screen Aspect Ratio

  - by Bill Evjen

  Jeffrey Dean, Pixar Aspect Ratio is very important to home video. What is aspect ratio – the ratio from the height to the width 2.35:1 The image is 2.35 times wide as it is high Pixar uses this for half of our movies This is called a widescreen image When modified to fit your television screen They cut this to fit the box of your screen When a comparison is made huge chunks of picture is missing It is harder to find what is going on when these pieces are missing The whole is greater than the pieces themselves. If you are missing pieces – you are missing the movie The soul and the mood is in the film shots. Cutting it to fit a screen, you are losing 30% of the movie Why different aspect ratios? Film before the 1950s 1.33:1 Academy Standard There were all aspects of images though. There was no standard. Thomas Edison developed projecting images onto a wall/screen He didn’t patent it as he saw no value in it. Then 1.37:1 came about to add a strip of sound This is the same size as a 35mm film Around 1952 – TV comes along NTSC Television followed the Academy Standard (4x3) Once TV came out, movie theater attendance plummets So Film brought forth color to combat this. Also early 3D Also Widescreen was brought forth. Cinema-Scope Studios at the time made movies bigger and bigger There was a Napoleon movie that was actually 4x1 … really wide. 1.85:1 Academy Flat 2.35:1 Anamorphic Scope (aka Panavision/Cinemascope) Almost all movies are made in these two aspect ratios Pixar has done half in one and half in the other Why choose one over the other? Artist choice It is part of the story the director wants to tell Can we preserve the story outside of the theaters? TVs before 1998 – they were very square Now TVs are very wide Historical options Toy Story released as it was and people cut it in a way that wasn’t liked by the studio Pan and Scan is another option Cut and then scan left or right depending on where the action is Frame Height Pixar can go back and animate more picture to account for the bottom/top bars. You end up with more sky and more ground The characters seem to get lost in the picture You lose what the director original intended Re-staging For animated movies, you can move characters around – restage the scene. It is a new completely different version of the film This is the best possible option that Pixar came up with They have stopped doing this really as the demand as pretty much dropped off Why not 1.33 today? There has been an evolution of taste and demands. VHS is a linear item The focus is about portability and not about quality Most was pan and scan and the quality was so bad – but people didn’t notice DVD was introduced in 1996 You could have more content – two versions of the film You could have the widescreen version and the 1.33 version People realized that they are seeing more of the movie with the widescreen High Def Televisions (16x9 monitors) This was introduced in 2005 Blu-ray Disc was introduced in 2006 This is all widescreen You cannot find a square TV anymore TVs are roughly 1.85:1 aspect ratio There is a change in demand Users are used to black bars and are used to widescreen Users are educated now What’s next for in-flight entertainment? High Def IFE Personal Electronic Devices 3D inflight

  Read the article

• Ubuntu 12.04 host – Virtualbox 4.1.12 Guest=Windows 7 – Network will not connect

  - by user287529

  Ubuntu 12.04 host – Virtualbox 4.1.12 Guest=Windows 7 – Network will not connect. I'm using Ubuntu 12.04 on an Acer Aspire 5742-7645 laptop with 4GB memory, Intel Core i3 processor, Intel HD Graphics, DVD drive, 802.1 b/g/n, and 500 GB HD. I connect to my router via a wireless connection. I have installed Virutalbox 4.1.12 from the Ubuntu Software Center and installed Guest additions 4.1.12 in the Windows 7 guest session. I have Windows XP and Windows 7 installed as guests in Virtual box The network settings are different for XP and 7 – see below. Network Settings XP guest = Adapter 1: PCnet-FAST III (NAT) - Network works perfectly and has worked well for several years. Network Settings Win 7 = Adapter 1: Intel PRO/1000 MT Desktop (Bridged adapter, eth1) Promiscuous Mode = allow all Cable connected = checked When I originally installed Windows 7, I tried NAT and the guest network would not connect. Once I changed the setting to the above (Bridged) the Network worked perfectly. However, what I believe is after updates (not sure if it was an Ubuntu or Windows update) the guest network stopped working and I can not get it to connect. Interfaces file content auto lo iface lo inet loopback Ifconfig yields lou@lou-Aspire-5742:~$ ifconfig eth0 Link encap:Ethernet HWaddr 1c:75:08:09:f6:5c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 Link encap:Ethernet HWaddr 4c:0f:6e:7c:9f:01 inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::4e0f:6eff:fe7c:9f01/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:18095 errors:2 dropped:0 overruns:0 frame:24344 TX packets:9281 errors:47 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5301926 (5.3 MB) TX bytes:1441885 (1.4 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3208 errors:0 dropped:0 overruns:0 frame:0 TX packets:3208 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:294088 (294.0 KB) TX bytes:294088 (294.0 KB) Ipconfig yields the following: Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::38ba:dbca:a21d:c3d1%13 Autoconfiguration IPv4 Address. . : 169.254.195.209 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : Tunnel adapter isatap.{B292E440-679D-4FC5-8E34-77D6804669C8}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : I'm not sure what else to do. Can someone provide the troubleshooting steps to determine what the problem is and possible solution?

  Read the article

• ReSharper 8.0 EAP now available

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/28/resharper-8.0-eap-now-available.aspxJetbrains have just released |ReSharper 8.0 Beta on their Early Access |Programme at http://www.jetbrains.com/resharper/whatsnew/?utm_source=resharper8b&utm_medium=newsletter&utm_campaign=resharper&utm_content=customersResharper 8.0 comes with the following new features:Support for Visual Studio 2013 Preview. Yes, ReSharper is known to work well with the fresh preview of Visual Studio 2013, and if you have already started digging into it, ReSharper 8.0 Beta is ready for the challenge.Faster code fixes. Thanks to the new Fix in Scope feature, you can choose to batch-fix some of the code issues that ReSharper detects in the scope of a project or the whole solution. Supported fixes include removing unused directives and redundant casts.Project dependency viewer. ReSharper is now able to visualize a project dependency graph for a bird's eye view of dependencies within your solution, all without compiling anything!Multifile templates. ReSharper's file templates can now be expanded to generate more than one file. For instance, this is handy for generating pairs of a main logic class and a class for extensions, or sets of partial files.Navigation improvements. These include a new action called Go to Everything to let you search for a file, type or method name from the same input box; support for line numbers in navigation actions; a new tool window called Assembly Explorer for browsing through assemblies; and two more contextual navigation actions: Navigate to Generic Substitutions and Navigate to Assembly Explorer.New solution-wide refactorings. The set of fresh refactorings is headlined by the highly requested Move Instance Method to move methods between classes without making them static. In addition, there are Inline Parameter and Pull Parameter. Last but not least, we're also introducing 4 new XAML-specific refactorings!Extraordinary XAML support. A plethora of new and improved functionality for all developers working with XAML code includes dedicated grid inspections and quick-fixes; Extract Style, Extract, Move and Inline Resource refactorings; atomic renaming of dependency properties; and a lot more.More accessible code completion. ReSharper 8 makes more of its IntelliSense magic available in automatic completion lists, including extension methods and an option to import a type. We're also introducing double completion which gives you additional completion items when you press the corresponding shortcut for the second time.A new level of extensibility. With the new NuGet-based Extension Manager, discovering, installing and uninstalling ReSharper extensions becomes extremely easy in Visual Studio 2010 and higher. When we say extensions, we mean not only full-fledged plug-ins but also sets of templates or SSR patterns that can now be shared much more easily.CSS support improvements. Smarter usage search for CSS attributes, new CSS-specific code inspections, configurable support for CSS3 and earlier versions, compatibility checks against popular browsers - there's a rough outline of what's new for CSS in ReSharper 8.A command-line version of ReSharper. ReSharper 8 goes beyond Visual Studio: we now provide a free standalone tool with hundreds of ReSharper inspections and additionally a duplicate code finder that you can integrate with your CI server or version control system.Multiple minor improvements in areas such as decompiling and code formatting, as well as support for the Blue Theme introduced in Visual Studio 2012 Update 2.

  Read the article

• Wireless device bug on 13.10. BCM4313 registers as eth1 instead of wlan0 and no internet access

  - by user205691

  My Hotel wiFi requires me to login with a username & password after connecting to the hotspot. So, my browser would open a page with username & passwrd fields to login and then connect to internet. But unfortunately, firefox & chromium dont seem to work. i dont think it is browser related but a setting for the wifi router or driver which is creating this issue. using Broadcom 801.11 STA wireless driver (proprietary). tried open source as well but same result !! The image linked below shows my wifi connection setting & Chromium. The login page itself comes up after a long time and after entering the credentials, it keeps loading for ever !! it is the same case for every other browser.. so i dont think its browser issue but something to do with wifi setting or network manager stuff.. interestingly, i am able to connect to WiFi networks with WPA key without any issue. Adhoc hotspot is a problem and that is my regular home network :( .. I hope i can get some help solving this issue ! I have tried repeating the same hotspot after login from my android, by creating a virtual repeater with WPA key and it works. I can browse on ubuntu using this method.. but cant be doing this regularly ! I tried loading the same login page of the hotel wifi while browsing through my repeater wifi created on mobile and screen shot attached below. the page loads up quick and easy.. so this means something is wrong with the way network manager handles adhoc connectivity & login ?? i installed wicd0 but it crashes on startup and not helpful at all ! Screenshot of Chromium page Login page with repeated hotspot ifconfig in my terminal results: krishna@krishna-HP-ENVY-4-Notebook-PC:~$ ifconfig eth0 Link encap:Ethernet HWaddr 28:92:4a:1d:54:fa UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr e0:06:e6:89:fa:49 inet addr:10.24.1.71 Bcast:10.24.1.255 Mask:255.255.255.0 inet6 addr: fe80::e206:e6ff:fe89:fa49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10940 errors:0 dropped:0 overruns:0 frame:348431 TX packets:6611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7669631 (7.6 MB) TX bytes:864195 (864.1 KB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2146 errors:0 dropped:0 overruns:0 frame:0 TX packets:2146 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:166120 (166.1 KB) TX bytes:166120 (166.1 KB) I wonder why is the wireless configured under eth1 ? I think this is a bug with earlier ubuntu versions, but is this normal in 13.10 or is there a wrong configuration here ? The wireless device in my pc is BCM4313 and i have installed the bcmwl-kernel-sources, wireless-tools to support the device. i also reinstalled the bcmwl-kernel as suggested on broadcom website, via synaptic package manager. Nothing has changed this situation ! I tried booting into liveUSB and then ifconfig results show wireless under wlan0. But then the wireless connects and loads the login page. So is the problem with the device configuration now ? i really want to get this fixed before i start configuring the other stuff like ATI graphics and such on the laptop for overheating.. lack of internet access is too bad a bug for me :P any help is appreciated!

  Read the article

• Wireless connection works but the internet is too slow to use in Ubuntu 11.04

  - by Garrin

  The internet is so slow as to be unusable. And I'm not being picky. Even after minutes I can't get my Google home page to load. I tried installing a package through apt-get and was getting rates between 0 and a few hundred bytes/s. That's bytes, not kilobytes! Mostly 0 however (no exaggeration, it spends large amounts of time stalled). And I would go to a speed test web site of some kind but I can't since nothing will load. Briefly put, the laptop I am using was connected to two wireless networks while using Ubuntu 11.04 without any issues before this. It was also connected to a wired network without any issues. It dual boats Windows 7 which has never had any issues, not even with the current wireless network. Just to be clear, on the current wi-fi network, Windows 7 encounters no issues (speedtest.net puts the network speed at 1mb/s) but my network connection in Ubuntu 11.04 is so slow as to literally be unusable. I am unfamiliar with the router except for the fact that it boasts a Rogers logo (that's a large ISP/cable provider in Canada for those not familiar with the land of igloos and polar bears). I am far from the router and some desktop widget I use tells me the signal strength is at 58% (it seems fairly reliable and this would appear to match up with the filled bars in the network icon). I should also mention I'm just renting a room in this house so I'm not the network administrator and while I can access the 192.168.0.1 router page, the password wasn't set to 'password' so it's not much use to me. Here are a bunch of commands I ran which don't tell me a whole lot but I thought might be more instructive to the wise around here: lspci (just showing my network card): 05:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) This one is self explanatory. PING www.googele.com (216.65.41.185) 56(84) bytes of data. 64 bytes from nnw.net (216.65.41.185): icmp_req=1 ttl=51 time=267 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=2 ttl=51 time=190 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=3 ttl=51 time=212 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=4 ttl=51 time=207 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=5 ttl=51 time=220 ms --- www.googele.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4003ms rtt min/avg/max/mdev = 190.079/219.699/267.963/26.121 ms ifconfig eth0 Link encap:Ethernet HWaddr 20:6a:8a:02:20:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:960 (960.0 B) TX bytes:960 (960.0 B) wlan0 Link encap:Ethernet HWaddr 20:7c:8f:05:c6:bf inet addr:192.168.0.16 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::227c:8fff:fe05:c6bf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:982 errors:0 dropped:0 overruns:0 frame:0 TX packets:658 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:497250 (497.2 KB) TX bytes:95076 (95.0 KB) Thank you

  Read the article

• "The connection has timed out" - Please help!

  - by gon

  I recently installed a fresh Ubuntu 12.04 LTS on a desktop, and the installation itself was successful (other than 'grub rescue' issue that I encountered but fixed) but this connection problem is really giving me a headache. Symptoms: 1. When I open the FireFox browser and try to connect to a website, it just hangs for a while saying "Connecting..." but eventually loads an error page "The connection has timed out". 2. It's not a browser problem (and I tried setting ipv6 thing to "true" at about:config) because running "sudo apt-get install [some-random-package]" at terminal fails ("E: Unable to locate package [package]") too. All other operations that need internet access are not working. 3. I certainly see a wired network (called "eth1") at the Network Manager, and it says "Connection Established" after disconnecting and then connecting again. I have tried almost everything that could be found from google search results still no luck. Their problems slightly differ from mine or the solutions just don't work. By the way it didn't have internet access when installing Ubuntu 12.04. (I ignored the message that I need internet to install Ubuntu) Could this be a problem? I'm sorry I don't remember if internet worked or not on the previous version of Ubuntu. :( I would really appreciate your help... I don't even know what more to do if this fails too.. Thanks!! Thanks for your comment. Here is the result of ifconfig: eth0 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b9 inet addr:10.10.65.185 Bcast:10.10.65.255 Mask:255.255.255.0 inet6 addr: fe80::7aac:c0ff:fe3d:b2b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3907 errors:0 dropped:0 overruns:0 frame:0 TX packets:771 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:393118 (393.1 KB) TX bytes:73472 (73.4 KB) Interrupt:16 eth1 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:204 (204.0 B) TX bytes:204 (204.0 B) route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.10.65.1 0.0.0.0 UG 0 0 0 eth0 10.10.65.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 /etc/resolv.conf: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 8.8.8.8 nameserver 8.8.4.4 nameserver 10.81.1.8 nameserver 10.1.2.10 nameserver 127.0.0.1 search yamatake.local /etc/network/interfaces: auto lo iface lo inet loopback #auto eth0 #iface eth0 inet dhcp #auto eth1 #iface eth1 inet dhcp And I'll also include the result of 'sudo lshw -C network' in case it might help: *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 78:ac:c0:3d:b2:b9 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 ip=10.10.65.185 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:93 memory:fc000000-fc00ffff *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth1 version: 10 serial: 78:ac:c0:3d:b2:b8 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 latency=0 link=no multicast=yes port=twisted pair speed=100Mbit/s resources: irq:94 memory:fb000000-fb00ffff

  Read the article

• ubuntu 10.04: wlan0 No such device

  - by AodhanOL

  I am using a Dell xps l702x and I am using ubuntu 10.04 because I need to use f77 (don't ask) and I wasn't able to get it working on later versions of ubuntu. I cannot use the wifi at all. I have tried to fix it and have had limited success (changed the output from rfkill list all from Hard blocked: yes, to hard blocked: no). Here is the output from rfkill list all aodhan@aodhan-laptop:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: dell-bluetooth: Bluetooth Soft blocked: no Hard blocked: no Here is the output from iwconfig: aodhan@aodhan-laptop:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. pan0 no wireless extensions. And here is the output from ifconfig -a: aodhan@aodhan-laptop:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 5c:f9:dd:3d:f2:f7 inet addr:192.168.1.17 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::5ef9:ddff:fe3d:f2f7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3417 errors:0 dropped:0 overruns:0 frame:0 TX packets:2894 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3317567 (3.3 MB) TX bytes:505049 (505.0 KB) Interrupt:30 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) pan0 Link encap:Ethernet HWaddr 7e:7e:e8:39:70:af BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) And finally, the output from lspci: 00:00.0 Host bridge: Intel Corporation Device 0104 (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Device 0116 (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c4b (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation Device 1246 (rev a1) 03:00.0 Network controller: Intel Corporation Device 008a (rev 34) 04:00.0 USB Controller: NEC Corporation Device 0194 (rev 04) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Please help me! Thank you in advance. Edit: Further info - this is a dual install with a windows 7 system as the other option. However, I can't access that until tomorrow (I won't have access to the windows 7 disc until then, and grub isn't letting me load it). Therefore, I can't be sure whether it still works on that or not. It used to, though.

  Read the article

• CA2000 passing object reference to base constructor in C#

  - by Timothy

  I receive a warning when I run some code through Visual Studio's Code Analysis utility which I'm not sure how to resolve. Perhaps someone here has come across a similar issue, resolved it, and is willing to share their insight. I'm programming a custom-painted cell used in a DataGridView control. The code resembles: public class DataGridViewMyCustomColumn : DataGridViewColumn { public DataGridViewMyCustomColumn() : base(new DataGridViewMyCustomCell()) { } It generates the following warning: CA2000 : Microsoft.Reliability : In method 'DataGridViewMyCustomColumn.DataGridViewMyCustomColumn()' call System.IDisposable.Dispose on object 'new DataGridViewMyCustomCell()' before all references to it are out of scope. I understand it is warning me DataGridViewMyCustomCell (or a class that it inherits from) implements the IDisposable interface and the Dispose() method should be called to clean up any resources claimed by DataGridViewMyCustomCell when it is no longer. The examples I've seen on the internet suggest a using block to scope the lifetime of the object and have the system automatically dispose it, but base isn't recognized when moved into the body of the constructor so I can't write a using block around it... which I'm not sure I'd want to do anyway, since wouldn't that instruct the run time to free the object which could still be used later inside the base class? My question then, is the code okay as is? Or, how could it be refactored to resolve the warning? I don't want to suppress the warning unless it is truly appropriate to do so.

  Read the article

• Manual (Dynamic) LINQ subquery using IN clause

  - by immortalali-msn-com

  Hi Everyone, I want to query the DB through LINQ writing manual SQL, my linq method is: var q = db.TableView.Where(sqlAfterWhere); returnValue = q.Count(); this method queries well if the value passed to variable "sqlAfterWhere" is: (this variable is String type) it.Name = 'xyz' but what if i want to use IN clause, using a sub query. (i need to use 'it' before every column name in the above query to work), i cant use 'it' before the sub query columns as its a separate query, so what should i do, if i dont use any thing, and use column names directly it gives error saying " could not be resolved" where is my column names with out 'it' at the begining. So the query not working is: (this is a string passed to the variable above): it.Name IN (SELECT Name FROM TableName WHERE Address LIKE '%SomeAddress%') the errors come out as: Name could not be resolved Address could not be resolved The exact error is: "'Name' could not be resolved in the current scope or context. Make sure that all referenced variables are in scope, that required schemas are loaded, and that namespaces are referenced correctly., near simple identifier, line 6, column 25." Same error for "Address as well if i use 'it.' before these columns it gives error as: "The element type 'Edm.Int32' and the CollectionType 'Transient.collection[Transient.rowtype(GroupID,Edm.Int32(Nullable=True,DefaultValue=))]' are not compatible. The IN expression only supports entity, primitive, and reference types. , near WHERE predicate, line 6, column 14." Thanks for the help

  Read the article

• fortran 90 user defined type, passing by value ?

  - by user279137

  I have an issue in fortran 90. I have a user defined type and when I call one of the MPI subroutines the data looks to be passed by values (not address, as I thought it should). The output arguments aren't modified. It seems to be specific to the MPI calls I tried the same thing in a simple test, and I can change the passed in values in the calling scope. I'm not sure why this is because I thought fortran always pass by address. Any idea what could be going on? Just to be clear the commented snippet shows how the calls are made. The in the first call, c%NSubDomains, is an output argument and should be modified in the calling scope, but its not. WHen I call with an array rather than a member of user defined type it works, in the uncommented snippet. ! ! This doesn't work output values aren't modified ?? ! call MPI_Dims_create(c%NProcs,c%NDims,c%NSubDomains,iErr) nsubs(:)=0 call MPI_Dims_create(c%NProcs,c%NDims,nsubs,iErr) c%NSubDomains=nsubs Thanks

  Read the article

• Spring Test / JUnit problem - unable to load application context

  - by HDave

  I am using Spring for the first time and must be doing something wrong. I have a project with several Bean implementations and now I am trying to create a test class with Spring Test and JUnit. I am trying to use Spring Test to inject a customized bean into the test class. Here is my test-applicationContext.xml: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="............."> <bean id="MyUuidFactory" class="com.myapp.UuidFactory" scope="singleton" > <property name="typeIdentifier" value="CLS" /> </bean> <bean id="ThingyImplTest" class="com.myapp.ThingyImplTest" scope="singleton"> <property name="uuidFactory"> <idref local="MyUuidFactory" /> </property> </bean> </beans> The injection of MyUuidFactory instance goes along with the following code from within the test class: private UuidFactory uuidFactory; public void setUuidFactory(UuidFactory uuidFactory) { this.uuidFactory = uuidFactory; } However, when I go to run the test (in Eclipse or command line) I get the following error (stack trace omitted for brevity): Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'MyImplTest' defined in class path resource [test-applicationContext.xml]: Initialization of bean failed; nested exception is org.springframework.beans.ConversionNotSupportedException: Failed to convert property value of type 'java.lang.String' to required type 'com.myapp.UuidFactory' for property 'uuidFactory'; nested exception is java.lang.IllegalStateException: Cannot convert value of type [java.lang.String] to required type [com.myapp.UuidFactory] for property 'uuidFactory': no matching editors or conversion strategy found Funny thing is, the Eclipse/Spring XML editor shows errors of I misspell any of the types or idrefs. If I leave the bean in, but comment out the dependency injection, everything work until I get a NullPointerException while running the test...which makes sense.

  Read the article

• JSF Page does not submit when onclick javascript is added to menu item?

  - by Padmarag

  I show some detail using popup windows. I want to close those when the user clicks on sign-out link. I have a JavaScript function that'll close the windows. The sign-out link is rendered using Navigation MenuModel. The definition in faces-config is as below - <managed-bean> <managed-bean-name>signoutNavigation</managed-bean-name> <managed-bean-class>com.xxx.xxx.framework.NavigationItem</managed-bean-class> <managed-bean-scope>none</managed-bean-scope> <managed-property> <property-name>label</property-name> <value>Sign Out</value> </managed-property> <managed-property> <property-name>viewId</property-name> <value>/signout.jsp</value> </managed-property> <managed-property> <property-name>outcome</property-name> <value>signout</value> </managed-property> <managed-property> <property-name>onclick</property-name> <value>closeOrderWindows()</value> </managed-property> </managed-bean> The problem is when I use the "onclick" property on managed-bean, the page doesn't submit to "signout.jsp" and remains on same page. When I remove/comment the "onclick" part, the page gets submitted properly. I use MyFaces Trinidad.

  Read the article

• JSF 2 Annotations with Websphere 7 (JEE5, JAVA 1.6)

  - by gerges

  Hey all, I'm currently writing a simple JSF 2 app for WAS 7. When I define the bean via the faces-config.xml, everything works great <managed-bean> <managed-bean-name>personBean</managed-bean-name> <managed-bean-class>com.prototype.beans.PersonBean</managed-bean-class> <managed-bean-scope>request</managed-bean-scope> </managed-bean> When I try to use the annotations below instead, the app failes. package com.prototype.beans; import javax.faces.bean.ManagedBean; import javax.faces.bean.RequestScoped; @ManagedBean(name="personBean") @RequestScoped public class PersonBean { .... } I've set the WAS classloader to Parent Last, and verified in the logs that Mojarra 2.x is loading. [5/17/10 10:46:59:399 CDT] 00000009 config I Initializing Mojarra 2.0.2 (FCS b10) for context '/JSFPrototype' However, when I try to use the app (which had worked with XML based config) I see the following [5/17/10 10:48:08:491 CDT] 00000016 lifecycle W /pages/inputname.jsp(16,7) '#{personBean.personName}' Target Unreachable, identifier 'personBean' resolved to null org.apache.jasper.el.JspPropertyNotFoundException: /pages/inputname.jsp(16,7) '#{personBean.personName}' Target Unreachable, identifier 'personBean' resolved to null Anyone know whats going wrong?

  Read the article

• jstl taglib not found, where have I gone wrong?

  - by James.Elsey

  I'm trying to add Google Maps onto my JSPs by using the googlemaps jstl taglib. I've added this into my maven pom <dependency> <groupId>com.lamatek</groupId> <artifactId>googlemaps</artifactId> <version>0.98c</version> <scope>provided<>/scope </dependency> This then included the googlemaps-0.98c library under my project libraries in NetBeans, I right clicked and selected Manually install artifact and located the googlemaps.jar file I had downloaded. I've then added this into my taglibs file <%@taglib prefix="googlemaps" uri="/WEB-INF/googlemaps" %> And have then included this where I actually want to show a map on my jsp <googlemaps:map id="map" width="250" height="300" version="2" type="STREET" zoom="12"> <googlemaps:key domain="localhost" key="xxxx"/> <googlemaps:point id="point1" address="74 Connors Lane" city="Elkton" state="MD" zipcode="21921" country="US"/> <googlemaps:marker id="marker1" point="point1"/> </googlemaps:map> But when I load up my application, I get the following error. org.apache.jasper.JasperException: /jsp/dashboard.jsp(1,1) /jsp/common/taglibs.jsp(6,56) PWC6117: File "/WEB-INF/googlemaps" not found root cause org.apache.jasper.JasperException: /jsp/common/taglibs.jsp(6,56) PWC6117: File "/WEB-INF/googlemaps" not found Have I missed something simple? I'm unable to spot what I've done wrong so far.. Thanks

  Read the article

• Cannot rollback ransaction with Entity Framework

  - by Luca

  I have to do queries on uncommitted changes and I tried to use transactions, but I found that it do not work if there are exceptions. I made a simple example to reproduce the problem. I have a database with only one table called "Tabella" and the table has two fields: "ID" is a autogenerated integer, and "Valore" is an integer with a Unique constraint. Then I try to run this code: using (TransactionScope scope = new TransactionScope()) { Db1Container db1 = new Db1Container(); try { db1.AddToTabella(new Tabella() { Valore = 1 }); db1.SaveChanges(); } catch { } try { db1.AddToTabella(new Tabella() { Valore = 1 }); db1.SaveChanges(); //Unique constraint is violated here and an exception is thrown } catch { } try { db1.AddToTabella(new Tabella() { Valore = 2 }); db1.SaveChanges(); } catch { } //scope.Complete(); //NEVER called } //here everything should be rolled back Now if I look into the database it should contain no records because the transaction should rollback, instead I find two records!!!! One with Valore=1 and one with Valore=2. I am missing something? It looks like the second call to SaveChanges method rollback its own changes and "deletes" the transaction, then the third call to SaveChanges commits the changes of the first and the third insert (at this point it is like the transaction not exists). I also tried to use SaveChanges(false) method (even without calling AcceptAllChanges method), but with no success: I have the same behaviour. I do not want the transaction to be rolled back automatically by SaveChanges, because I want to correct the errors (for example by user interaction in the catch statement) and make a retry. Can someone help me with this? It seems like a "bug", and it is giving me a really big headache...

  Read the article

• QPrinter, QPrintDialog giving errors not encountered in code examples

  - by karunesh

  In the imageviewer example, QPainter and QPrintDialog objects are defined and used as following: #ifndef QT_NO_PRINTER QPrinter printer; #endif and QPrintDialog dialog(&printer, this); A QPainter object is then initialized with QPrinter (printer). When I tried to use the same code in my function, it looks like: void imageviewer::print() { ... #ifdef QT_NO_PRINTER QPrinter printer(this); //ERROR 1 QPrintDialog dialog(&printer, this);//ERROR 2 and 3 if (dialog.exec()) //ERROR 4 { //do the painting } #endif } The errors are: 1. variable 'QPrinter printer' has initializer but incomplete type 2. 'QPrintDialog' was not declared in this scope 3. Expected ';' before 'dialog' 4. 'dialog' was not declared in this scope What I am notable to understand is why are these errors arising when I am using them in my code, but not in the example. As a friend pointed out, I made sure that I used the right #include files and made sure that 'printer' and 'dialog' were not touched anywhere else in the example.

  Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >