Search Results

Search found 3148 results on 126 pages for 'angularjs scope'.

Page 56/126 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

  • radvd is not assigning prefix

    - by Samik
    I'm currently trying to setup IPv6 address auto-configuration with router advertisement daemon (radvd) on a virtual machine running CentOS 6.5. But the eth0 interface is not obtaining that prefix. I've obtained the ULA prefix from here. Contents of /etc/sysctl.conf # Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Controls IP packet forwarding net.ipv4.ip_forward = 0 net.ipv6.conf.all.forwarding = 1 # Controls source route verification net.ipv4.conf.default.rp_filter = 1 # Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 # Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 # Controls whether core dumps will append the PID to the core filename. # Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 # Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 # Disable netfilter on bridges. net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 # Controls the default maxmimum size of a mesage queue kernel.msgmnb = 65536 # Controls the maximum size of a message, in bytes kernel.msgmax = 65536 # Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 # Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 Contents of /etc/radvd.conf # NOTE: there is no such thing as a working "by-default" configuration file. # At least the prefix needs to be specified. Please consult the radvd.conf(5) # man page and/or /usr/share/doc/radvd-*/radvd.conf.example for help. # # interface eth0 { AdvSendAdvert on; MinRtrAdvInterval 3; MaxRtrAdvInterval 10; AdvDefaultPreference low; AdvHomeAgentFlag off; prefix fd8a:8d9d:808f:1::/64 { AdvOnLink on; AdvAutonomous on; AdvRouterAddr on; }; }; Contents of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=52:54:00:74:d7:46 TYPE=Ethernet UUID=af5db1cb-e809-4098-be1a-5a74dbb767b1 ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=dhcp IPV6INIT=yes IPV6_AUTOCONF=yes I've also enabled radvd at startup through chkconfig. Though I noticed that radvd is starting after interfaces are brought up. I've tried restarting the network service afterwards but still I get the following link-local address only #ip -6 addr show 1: lo: mtu 16436 inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qlen 1000 inet6 fe80::5054:ff:fe74:d746/64 scope link valid_lft forever preferred_lft forever Edit: Based on the answer given by Sander Steffann I still need clarification on some points but I'm posting here what worked. Contents of /etc/sysconfig/network NETWORKING=yes HOSTNAME=syslog-ng-server NETWORKING_IPV6=yes IPV6FORWARDING=yes Contents of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=52:54:00:74:d7:46 TYPE=Ethernet UUID=af5db1cb-e809-4098-be1a-5a74dbb767b1 ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=dhcp IPV6INIT=yes IPV6_AUTOCONF=yes IPV6FORWARDING=no Removed following line from /etc/sysctl.conf net.ipv6.conf.all.forwarding = 1 Contents of /etc/radvd.conf is as previous.

    Read the article

  • REST API Help in Rails

    - by dannymcc
    Hi Everyone, I am trying to get some information posted using our accountancy package (FreeAgentCentral) using their API via a GEM. http://github.com/aaronrussell/freeagent_api/ I have the following code to get it working (supposedly): Kase Controller def create @kase = Kase.new(params[:kase]) @company = Company.find(params[:kase][:company_id]) @kase = @company.kases.create!(params[:kase]) respond_to do |format| if @kase.save UserMailer.deliver_makeakase("[email protected]", "Highrise", @kase) @kase.create_freeagent_project(current_user) #flash[:notice] = 'Case was successfully created.' flash[:notice] = fading_flash_message("Case was successfully created & sent to Highrise.", 5) format.html { redirect_to(@kase) } format.xml { render :xml => @kase, :status => :created, :location => @kase } else format.html { render :action => "new" } format.xml { render :xml => @kase.errors, :status => :unprocessable_entity } end end end To save you looking through, the important part is: @kase.create_freeagent_project(current_user) Kase Model # FreeAgent API Project Create # Required attribues # :contact_id # :name # :payment_term_in_days # :billing_basis # must be 1, 7, 7.5, or 8 # :budget_units # must be Hours, Days, or Monetary # :status # must be Active or Completed def create_freeagent_project(current_user) p = Freeagent::Project.create( :contact_id => 0, :name => "#{jobno} - #{highrisesubject}", :payment_terms_in_days => 5, :billing_basis => 1, :budget_units => 'Hours', :status => 'Active' ) user = Freeagent::User.find_by_email(current_user.email) Freeagent::Timeslip.create( :project_id => p.id, :user_id => user.id, :hours => 1, :new_task => 'Setup', :dated_on => Time.now ) end lib/freeagent_api.rb require 'rubygems' gem 'activeresource', '< 3.0.0.beta1' require 'active_resource' module Freeagent class << self def authenticate(options) Base.authenticate(options) end end class Error < StandardError; end class Base < ActiveResource::Base def self.authenticate(options) self.site = "https://#{options[:domain]}" self.user = options[:username] self.password = options[:password] end end # Company class Company def self.invoice_timeline InvoiceTimeline.find :all, :from => '/company/invoice_timeline.xml' end def self.tax_timeline TaxTimeline.find :all, :from => '/company/tax_timeline.xml' end end class InvoiceTimeline < Base self.prefix = '/company/' end class TaxTimeline < Base self.prefix = '/company/' end # Contacts class Contact < Base end # Projects class Project < Base def invoices Invoice.find :all, :from => "/projects/#{id}/invoices.xml" end def timeslips Timeslip.find :all, :from => "/projects/#{id}/timeslips.xml" end end # Tasks - Complete class Task < Base self.prefix = '/projects/:project_id/' end # Invoices - Complete class Invoice < Base def mark_as_draft connection.put("/invoices/#{id}/mark_as_draft.xml", encode, self.class.headers).tap do |response| load_attributes_from_response(response) end end def mark_as_sent connection.put("/invoices/#{id}/mark_as_sent.xml", encode, self.class.headers).tap do |response| load_attributes_from_response(response) end end def mark_as_cancelled connection.put("/invoices/#{id}/mark_as_cancelled.xml", encode, self.class.headers).tap do |response| load_attributes_from_response(response) end end end # Invoice items - Complete class InvoiceItem < Base self.prefix = '/invoices/:invoice_id/' end # Timeslips class Timeslip < Base def self.find(*arguments) scope = arguments.slice!(0) options = arguments.slice!(0) || {} if options[:params] && options[:params][:from] && options[:params][:to] options[:params][:view] = options[:params][:from]+'_'+options[:params][:to] options[:params].delete(:from) options[:params].delete(:to) end case scope when :all then find_every(options) when :first then find_every(options).first when :last then find_every(options).last when :one then find_one(options) else find_single(scope, options) end end end # Users class User < Base self.prefix = '/company/' def self.find_by_email(email) users = User.find :all users.each do |u| u.email == email ? (return u) : next end raise Error, "No user matches that email!" end end end config/initializers/freeagent.rb Freeagent.authenticate({ :domain => 'XXXXX.freeagentcentral.com', :username => '[email protected]', :password => 'XXXXXX' }) The above render the following error when trying to create a new Case and send the details to FreeAgent: ActiveResource::ResourceNotFound in KasesController#create Failed with 404 Not Found and ActiveResource::ResourceNotFound (Failed with 404 Not Found): app/models/kase.rb:56:in `create_freeagent_project' app/controllers/kases_controller.rb:96:in `create' app/controllers/kases_controller.rb:93:in `create' Rendered rescues/_trace (176.5ms) Rendered rescues/_request_and_response (1.1ms) Rendering rescues/layout (internal_server_error) If anyone can shed any light on this problem it would be greatly appreciated! Thanks, Danny

    Read the article

  • variables used in inner queries

    - by wcpro
    im trying to build a query that has something like this select id, (select top 1 create_date from table2 where table1id = t1.id and status = 'success') [last_success_date], (select count(*) from table2 where table1id = t1.id and create_date > [last_success_date]) [failures_since_success] from table1 t1 as you can see the [last_Success_Date] is not within the scope of the second query, and i was wondering how i could access that value in other queries without having to rerun it?

    Read the article

  • LVS Configuration issue (Using piranha Tool)

    - by PravinG
    I have configured LVS on cent os using piranha tool .I am using vip of internal n/w as gateway for real server we have two NIC one having exteranl Ip and other for internal n/w which is on 192.168.3.0/24 network. But I am not able to connect from client it shows connection refused error . Please suggest iptables rules for private n public n/w to communicate. May be I am missing this . Iptables rules that we have added are : iptables -t nat -A POSTROUTING -p tcp -s 192.168.3.0/24 --sport 5000 -j MASQUERADE this is my ipconfig: eth0 Link encap:Ethernet HWaddr 00:00:E8:F6:74:DA inet addr:122.166.233.133 Bcast:122.166.233.255 Mask:255.255.255.0 inet6 addr: fe80::200:e8ff:fef6:74da/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:94433 errors:0 dropped:0 overruns:0 frame:0 TX packets:130966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9469972 (9.0 MiB) TX bytes:19929308 (19.0 MiB) Interrupt:16 Base address:0x2000 eth0:1 Link encap:Ethernet HWaddr 00:00:E8:F6:74:DA inet addr:122.166.233.136 Bcast:122.166.233.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 00:E0:20:14:F9:2D inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:20ff:fe14:f92d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:123718 errors:0 dropped:0 overruns:0 frame:0 TX packets:148856 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:18738556 (17.8 MiB) TX bytes:11697153 (11.1 MiB) Interrupt:17 Memory:60000400-600004ff eth1:1 Link encap:Ethernet HWaddr 00:E0:20:14:F9:2D inet addr:192.168.3.10 Bcast:192.168.3.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:17 Memory:60000400-600004ff eth2 Link encap:Ethernet HWaddr 00:16:76:6E:D1:D2 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:21 Base address:0xa500 and ipvsadm -ln command [root@abts-kk-static-133 ~]# ipvsadm -ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 122.166.233.136:5000 wlc TCP 122.166.233.136:5004 wlc lvs server routing table Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 122.166.233.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1004 0 0 eth1 0.0.0.0 122.166.233.1 0.0.0.0 UG 0 0 0 eth0 real 1 real 2 we have configured various ports from 5000:5008 . Do we need to this iptables for all ports? Suggest me how should I solve this issue.

    Read the article

  • ubuntu eth0 not reconnecting after cable unplugged

    - by Alex
    I'm running kubuntu 9.10 w/ gnome, I have a static IP defined in /etc/network/interfaces When I unplugged my network cable and rebooted, then reconnected the network cable I was not able to connect. I tried using sudo ifup eth0, and then ifconfig and it seemed as though the IP address had been assigned and I was connected, but I wasn't. I then did ifdown eth0, and again ifup eth0. For some reason I'm not able to access the network. Furthermore, I also attempted to connect via wlan, and was able to connect to the wireless network, but cannot "see" the network. I can't transfer data or access the internet or anything on the network including the router. How do I resolve this? topsy@monolyth:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1c:25:1c:df:70 inet addr:192.168.1.145 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21c:25ff:fe1c:df70/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5720 errors:0 dropped:0 overruns:0 frame:0 TX packets:565 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:378035 (378.0 KB) TX bytes:46832 (46.8 KB) Memory:fe000000-fe020000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) By access the network I mean the local network as well as the internet. topsy@monolyth:~$ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=9.14 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=1.24 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1.01 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=1.00 ms [snip... all OK, icmp_seq from 5-30, time between 0.981-1.25ms] ^C --- 192.168.1.1 ping statistics --- 30 packets transmitted, 30 received, 0% packet loss, time 29035ms rtt min/avg/max/mdev = 0.971/1.300/9.140/1.458 ms topsy@monolyth:~$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default 192.168.1.1 0.0.0.0 UG 100 0 0 eth0 root@monolyth:~# cat /etc/resolv.conf # Generated by NetworkManager

    Read the article

  • OpenVPN not sending traffic to internet?

    - by coleifer
    I've set up openvpn on my pi and am running into a small issue. I can connect to the VPN server and ping it just fine, and I can also connect to other machines on my local network. However I am unable, when connected to the VPN, to reach the outside world (either by name lookup or IP). here are the details: On the server the tun0 interface: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.1 netmask 255.255.255.255 destination 10.8.0.2 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 I can ping it just fine: # ping -c 3 10.8.0.1 PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data. 64 bytes from 10.8.0.1: icmp_seq=1 ttl=64 time=0.159 ms 64 bytes from 10.8.0.1: icmp_seq=2 ttl=64 time=0.155 ms 64 bytes from 10.8.0.1: icmp_seq=3 ttl=64 time=0.156 ms --- 10.8.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms Routing table # ip route show default via 192.168.1.1 dev eth0 metric 204 10.8.0.0/24 via 10.8.0.2 dev tun0 10.8.0.2 dev tun0 proto kernel scope link src 10.8.0.1 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.6 metric 204 I also have ip traffic forwarding: net.ipv4.ip_forward = 1 I do not have any custom iptables rules (that I'm aware of). On the client, I can connect to the VPN. Here is my tun0: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.6 netmask 255.255.255.255 destination 10.8.0.5 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 21 bytes 1527 (1.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 And on the client I can ping it: sudo ping -c 3 10.8.0.6 PING 10.8.0.6 (10.8.0.6) 56(84) bytes of data. 64 bytes from 10.8.0.6: icmp_seq=1 ttl=64 time=0.035 ms 64 bytes from 10.8.0.6: icmp_seq=2 ttl=64 time=0.026 ms 64 bytes from 10.8.0.6: icmp_seq=3 ttl=64 time=0.032 ms --- 10.8.0.6 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.026/0.031/0.035/0.003 ms I can ssh from the client into another server on my LAN (192.168.1.x), however I cannot reach anything outside my LAN. Here's some of the server logs at the bottom of this gist: https://gist.github.com/coleifer/6ef95c3008f130249933/edit I am frankly out of ideas! I don't think it's my client because both my laptop and my phone (which has an openvpn client) exhibit the same behavior. I had OpenVPN installed on this pi before using debian and it worked, so I don't think it's my router but of course anything is possible.

    Read the article

  • How do you prevent spam being sent by your users?

    - by Ernie
    So, for the third time in about two weeks (maybe less), one of our customers has had their password compromised, and a spammer was sending mail with their account using our webmail. As a result, our outgoing mail server has been listed at Spamhaus, and a lot of our outgoing mail is being rejected. I can't think of any way to prevent this from happening (although now our webmail server is using Sendmail instead of SMTP, but that just limits the scope of the problem), yet the big ISPs never seem to have a problem like this.

    Read the article

  • Does DFSR replicate shadow copies?

    - by Jeff Sacksteder
    There a a few questions related to using DFSR and Shadow Copies together, but none that indicates if Shadow Copies replicate or not. Meaning, if I have a a pair of DFS replicas with Shadow Copies on Server-A, can I revert that file to a previous version on Server-B? If so, will that reversion be replicated back to Server-A? I suspect not- that VSS is a local NTFS feature and outside the scope of replication, but I cannot verify that myself at the moment.

    Read the article

  • pptpd configuration

    - by Ian R.
    I would like a little help on configuring pptp so I can use my server as a vpn server since I have 10 ip's on it and I travel a lot so that would really help me and my partners. I managed to install everything needed but my vpn client fails to connect due to some reason that I cannot understand. I know there are 2 files in pptp that you're supposed to edit so I will post my 2 files here: /etc/ppp/pptpd-options name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 proxyarp nodefaultroute lock nobsdcomp /etc/pptpd.conf option /etc/ppp/pptpd-options logwtmp localip xx.158.177.231 remoteip xx.158.177.103,xx.158.177.116,xx.158.177.121,xx.158.177.124,xx.158.177.125,xx.158.177.131,xx.158.177.134,xx.158.177.139,xx.158.177.142,xx.158.177.145 interfaces file eth0 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.231 Bcast:xx.158.177.255 Mask:255.255.254.0 inet6 addr: xx80::216:3eff:fe51:31ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:56352 errors:0 dropped:0 overruns:0 frame:0 TX packets:3xx15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4884030 (4.8 MB) TX bytes:6780974 (6.7 MB) Interrupt:16 eth0:1 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.103 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:2 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.116 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:3 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.121 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:4 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.124 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:5 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.125 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:6 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.131 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:7 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.134 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:8 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.139 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:9 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.142 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:10 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.145 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:286 (286.0 B) TX bytes:286 (286.0 B)

    Read the article

  • How to use CLEAR USB internet connection in Ubuntu (host) and WindowsXP (guest) using VirtualBox

    - by bithacker
    I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for linux as yet. I've installed windowsxp as guest in ubuntu and the version I'm using is 3.2.2. USB is connecting fine in WindowsXP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

    Read the article

  • IPv6 link-local routing

    - by singpolyma
    "Routers do not forward packets with link-local addresses." says Wikipedia (http://en.wikipedia.org/wiki/Link-local_address) What I want to know is: that makes sense if the destination is a link-local address, but what if I have a box that only has a link-local address trying to reach a global/site scope address? Can the traffic make it back, or will that fail because the return packets will be to a link-local address?

    Read the article

  • How to enable Windows Mobile 6 logs?

    - by Serge - appTranslator
    Hi All, Someone told me that one can enable Windows Mobile simply by creating a bunch of registry values as explained in this TechEd article. The article is in the scopê of MS System Configuration Manager but my client tells me that the logs can be created even without System Config Manager. I tried but I couldn't get the system to create any such log file. Can anyone explain how to get this logs (or why I can't get them)? TIA,

    Read the article

  • Sublime Text 2 + Eval in REPL

    - by user330121
    Using sublime text 2 on windows 8, I've set my key-bindings to: [ { "keys": ["ctrl+alt+f"], "args": { "id": "repl_f#", "file": "config/F/Main.sublime-menu" }, "command": "run_existing_window_command" }, { "keys": ["ctrl+shift+enter"], "args": { "scope": "selection" }, "command": "repl_transfer_current" } ] But when I press "ctrl+shift+enter" I get the following error. Does anyone know how to resolve this? Traceback (most recent call last): File ".\sublime_plugin.py", line 356, in run_ File ".\text_transfer.py", line 123, in run File ".\sublimerepl.py", line 437, in find_repl File ".\repls\subprocess_repl.py", line 185, in is_alive File ".\subprocess.py", line 705, in poll File ".\subprocess.py", line 874, in _internal_poll WindowsError: [Error 6] The handle is invalid

    Read the article

  • How can I force all internet traffic over a PPTP VPN but still allow local lan access?

    - by user126715
    I have a server running Linux Mint 12 that I want to keep connected to a PPTP VPN all the time. The VPN server is pretty reliable, but it drops on occasion so I just want to make it so all internet activity is disabled if the VPN connection is broken. I'd also like to figure out a way to restart it automatically, but that's not as big of an issue since this happens pretty rarely. I also want to always be able to connect to the box from my lan, regardless of whether the VPN is up or not. Here's what my ifconfig looks like with the VPN connected properly: eth0 Link encap:Ethernet HWaddr 00:22:15:21:59:9a inet addr:192.168.0.171 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:15ff:fe21:599a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37389 errors:0 dropped:0 overruns:0 frame:0 TX packets:29028 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:37781384 (37.7 MB) TX bytes:19281394 (19.2 MB) Interrupt:41 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1446 errors:0 dropped:0 overruns:0 frame:0 TX packets:1446 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:472178 (472.1 KB) TX bytes:472178 (472.1 KB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.10.11.10 P-t-P:10.10.11.9 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:23 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:1368 (1.3 KB) TX bytes:1812 (1.8 KB) Here's an iptables script I found elsewhere that seemed to be for the problem I'm trying to solve, but it wound up blocking all access, but I'm not sure what I need to change: #!/bin/bash #Set variables IPT=/sbin/iptables VPN=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 10.` LAN=192.168.0.0/24 #Flush rules $IPT -F $IPT -X #Default policies and define chains $IPT -P OUTPUT DROP $IPT -P INPUT DROP $IPT -P FORWARD DROP #Allow input from LAN and tun0 ONLY $IPT -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT $IPT -A INPUT -i lo -j ACCEPT $IPT -A INPUT -i tun0 -m conntrack --ctstate NEW -j ACCEPT $IPT -A INPUT -s $LAN -m conntrack --ctstate NEW -j ACCEPT $IPT -A INPUT -j DROP #Allow output from lo and tun0 ONLY $IPT -A OUTPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT $IPT -A OUTPUT -o lo -j ACCEPT $IPT -A OUTPUT -o tun0 -m conntrack --ctstate NEW -j ACCEPT $IPT -A OUTPUT -d $VPN -m conntrack --ctstate NEW -j ACCEPT $IPT -A OUTPUT -j DROP exit 0 Thanks for your help.

    Read the article

  • Exclude filetypes in a Textmate project

    - by cwd
    I know in TextMate I can go to preferences - advanced - folder references and play with the regex pattern to remove certain types of files and folders by default. I heard that if you have an existing project, however, and chance these, the project is not affected. From a similar but different angle, I am interested to know if I can exclude certain types of files, say anything named "index.html" from an existing project while not changing the global scope. Thanks!

    Read the article

  • Change owner recursively with Powershell?

    - by Mikael Grönfelt
    I'm trying to use Powershell to change owner of a folder, recursively. I'm basically using this code: $acct1 = New-Object System.Security.Principal.NTAccount('DOMAIN\Enterprise Admins') $profilefolder = Get-Item MyFolder $acl1 = $profilefolder.GetAccessControl() $acl1.SetOwner($acct1) set-acl -aclobject $acl1 -path MyFolder This will change ownership at the first level, but not for any subfolders or files. Is there a way to extend the scope to all content of MyFolder?

    Read the article

  • NIC is receiving, but not transmitting at all?

    - by Shtééf
    I'm trying to fix a very strange problem remotely on a machine at a customer site. The machine is a Dell PowerEdge, I believe a 1950 (haven't verified, but the lspci output matches specs I found.) The machine has two similar NICs, identified as Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) by lspci, and using the bnx2 driver. (I suspect these are on-board and on the same controller, which is what I'm accustomed to for this type of machine.) The primary interface eth0 works perfectly, and is in fact how I am ssh'd in. However, the secondary interface eth1 is not transmitting. I can see this in ifconfig output, for example, where the TX field is always 0. However, it is receiving, and tcpdump shows ARP requests coming from the ISP's gateway on the other side. The interface is physically connected to a Siemens BSTU4 modem, configured by the ISP. The link is properly set to 10MBps and full duplex, without negotation, as the ISP requested. A small /30 subnet is configured. For the sake of anonimity, let's say the machine is 3.3.3.2/30, and the ISP's gateway .1. The machine has no firewall settings whatsoever. Even running something like arping -I eth1 3.3.3.1, and running tcpdump alongside, shows no traffic whatsoever being transmitted on the interface. (But the other side keeps steadily sending ARP requests, and that is all that can be seen.) What could be causing this? Here's some output, anonymized, which may hopefully help: $ ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off Supports Wake-on: d Wake-on: d Link detected: yes $ ip link show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:15:c5:xx:xx:xx brd ff:ff:ff:ff:ff:ff $ ip -4 addr show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 inet 3.3.3.2/30 brd 3.3.3.3 scope global eth1 $ ip -4 route show match 3.3.3.0/30 3.3.3.0/30 dev eth1 proto kernel scope link src 3.3.3.2 default via 10.0.0.5 dev eth0

    Read the article

  • Routing table with two NIC adapters in libvirt/KVM

    - by lzap
    I created a virtual NAT network (192.168.100.0/24 network) in my libvirt and new guest with two interfaces - one in this network, one as bridged (10.34.1.0/24 network) to the local LAN. The reason for that is I need to have my own virtual network for my DHCP/TFTP/DNS testing and still want to access my guest externally from my LAN. On both networks I have working DHCP, both giving them IP addresses. When I setup NAT port forwarding (e.g. for ssh), I can connect to the eth0 (virtual network), everything is fine. But when I try to access the eth1 via bridged interface, I have no response. I guess I have problem with my routing table - outgoing packets are routed to the virtual NAT network (which has access to the machine I am connecting from - I can ping it). But I am not sure if this setup is correct. I think I need to add something to my routing table. # ifconfig eth0 Link encap:Ethernet HWaddr 52:54:00:B4:A7:5F inet addr:192.168.100.14 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::5054:ff:feb4:a75f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16468 errors:0 dropped:27 overruns:0 frame:0 TX packets:6081 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22066140 (21.0 MiB) TX bytes:483249 (471.9 KiB) Interrupt:11 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 52:54:00:DE:16:21 inet addr:10.34.1.111 Bcast:10.34.1.255 Mask:255.255.255.0 inet6 addr: fe80::5054:ff:fede:1621/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4911 (4.7 KiB) TX bytes:9 # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.34.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth1 0.0.0.0 192.168.100.1 0.0.0.0 UG 0 0 0 eth0 Network I am trying to connect from is different than network the hypervisor is connected to: 10.36.0.0. But it is accessible from that network. So I tried to add new route rule: route add -net 10.36.0.0 netmask 255.255.0.0 dev eth1 And it is not working. I thought setting correct interface would be sufficient. What is needed to get my packets coming through?

    Read the article

  • how to use iptables to block the IP of device connected to openwrt router

    - by scola
    I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

    Read the article

  • How to access variables in an erb-subtemplate in puppet?

    - by c33s
    example.pp $foo = 'bar' $content = template('mymodule/maintemplate.erb') maintemplate.erb <% bar = foo + "extra" %> foobar = scope_function_template(['mymodule/subtemplate.erb']) subtemplate.erb <%# here i want to access the variable bar %> <%= bar %> there is the function <%= scope.lookupvar('::bar') %> is there a kind of parent::bar in erb templateing, or can i pass some variables to the subtemplate, or can i only access the outer variable (of the .pp file) with ::foo

    Read the article

  • apt: how to search using package tags?

    - by depesz
    Some (most?) packages in Debian, have tags. For example: =# apt-cache show squirrelmail | perl -lne 'print if /^Tag:/.../^\S/' Tag: implemented-in::php, interface::web, mail::imap, mail::smtp, mail::user-agent, network::server, protocol::http, protocol::imap, protocol::smtp, role::program, scope::application, use::browsing, use::editing, use::searching, use::transmission, use::viewing, web::TODO, web::application, works-with::mail Section: web But, I can't find a way, to list all packages with given tag. Is it possible?

    Read the article

  • What should I do about this user?

    - by Tim Brigham
    What should I do about this user? The user is: Downloading pornography Attempting unauthorized access Running hacking software Sending unsolicited email Installing software / tampering with the system etc This is intended as a generic answer for employee behavioral problems, a la Can you help me with my software licensing question? I could see where acceptable use issues are a touch out of scope for SF, however it is one of those things most sysadmins will run into. I don't want to keep rewriting similar answers.

    Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >