Search Results

Search found 4481 results on 180 pages for 'black rez'.

Page 52/180 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • Can't access my Ubuntu admin account

    - by Kermilli
    It just shows a black screen with words in it for a fraction of a second and then gets back to users screen(where you choose your user). I tried to enter from another account and removed the password for the admin account , but it didn't work too , and then I couldn't access my admin privileged places with my old password ? What should I do ? I tried to change my password from recovery but no success.

    Read the article

  • problem with booting ubuntu 12.04 lts after instaling it alonside windows 8.1

    - by Alexandar
    i installed ubuntu alongside windows 8.1 over an usb drive on my lap top. At first i had problems with boot selection menu and i fixed it with EasyBCD now i have another problem i boot up my lap top and then it takes me to chose windows 8.1 or ubuntu i press ubuntu and it takes me to grub menu now i chose there ubuntu 12.04 and it starts to boot for few secs then my screen goes black and nothing happens few secs later i hear like short error noise and still nothin happens. Can someone help me solve this problem?

    Read the article

  • What do each of the TTYs do?

    - by david25
    I know that alt+ctrl+F(1-6) take me to available command lines, and that F1 command line is used for debugging, and F8 is the GUI desktop, that what i know but today i noticed there in F7 that does nothing, it only displays some sort of log in message, and there is F(9-12) that just display black screen with blinking under scroll . can anyone enlighten me what those consoles do, are they for trouble shooting maybe? i use ubuntu netbook 10.10.

    Read the article

  • problem after suspend ubuntu 12.04

    - by alex
    I'd like to have a thing cleared. I just started using Ubuntu and installed 12.04 the only problem is that when i turn my laptop back on after suspension i get a black screen with this written: legacy_resume():pnp_bus_resume+0x0/0x70 return -19 PM: Device 00:09 failed to resume: error -19 i8042: Can't reactivate AUX port and after this message at times my touchpad doesn't work as well. I am currently using a vpc eh2n1e thanks for the support

    Read the article

  • Can't install Dual Boot from USB live - crash and nouvea problem

    - by user215064
    I just got a new laptop with Windows 8 pre-installed and I'm trying to make a dual boot with Ubuntu on my other hard drive but I can't make the Live USB work. I followed all the procedure for disabling the Security Boot and the UEFI setting but still doesn't work. It seems to start the installing procedure but I never get to choose anything: after a few seconds the screen turns black with an error message [18.707838] divide error: 0000 [#1] SMP (it goes on for several lines quoting some nouveau problem). Any ideas?

    Read the article

  • How to fix SLOW graphics printing on Ubuntu 12.10? Text is OK

    - by vbasic246
    Ubuntu 12.10 32-bit upgrade (dual boot with Win-7). Custom PC, onboard NVidia graphics. Motherboard: ECS EliteGroup GF8200A Black Series "HP LaserJet 3015" multifunction printer. Graphics printing fine with UB12.04, VERY SLOW on UB12.10. Per an article ran: ~$ sudo apt-get install mesa-utils ~$ glxinfo | grep renderer Output: OpenGL renderer string: GeForce 8200/integrated/SSE2/3DNOW! Do I need to get a graphics card to fix or will software tweaks solve this?

    Read the article

  • Picking an SEO Company Does Not Have to Be Difficult

    If you are considering hiring an SEO Company to get some SEO services done for your site, then you cannot be careful enough because hiring the wrong company can cause significant damage to your SEO campaign. A wrong SEO company practicing black or grey hat techniques can get your site banned or penalized by Google.

    Read the article

  • Xubuntu 14.04, Power Manager, Screensaver

    - by Bathynomus
    When my computer is inactive, I keep getting a black screen and the screen goes into locked mode asking for a password, even though in Power Manager I have "Never" set for actions and monitor and Extended "Lock Screen" is unchecked. I don't see a screensaver, but perhaps that is the issue? Is anyone else experiencing this? Is this a bug? Is there a temporary workaround? I did not see this issue in 12.xx, 13.xx.

    Read the article

  • Ubuntu 12.04 to 14.04 LTS upgraded but crashed soon after restarting the system

    - by LEELA MANOJ N
    In Ubuntu 12.04 the update manager offered me to upgrade it to 14.04, so i kept it for upgrading for whole night and after all the downloading, fetching and removing of packages it asked for restart. So i restarted the system that's it from that time there is no log in page, nothing is coming and just a black command prompt prompting initramfs is appearing (BUSY BOX or something). How can i solve this issue ? or there is way to revert back to 12.04? please help?

    Read the article

  • help me with my wine, it doesn't work properly

    - by Sebastian Raun Mikkelsen
    When I try to run something with wine, nothing happens! I have many had problems with Ubuntu so I have tried to get Windows 8 back on the computer, but because Ubuntu can't run exe files I can't open the installer. Furthermore my computer can't boot from a CD/DVD anymore after I installed Ubuntu, it turns up with a black screen with a blinking marker at the upper left corner of the screen and after 10 minutes it says something like Can't boot from the selected media device - select another How do I get Windows back?

    Read the article

  • system problem! ubuntu 12.4

    - by Juan Riggioni
    when I was upgrading to ubuntu 12.4 I had to leave and accidentally turned off the laptop in half update. When lit it not entered the system, it put the screen in black and looked just the mouse. I had to install ubuntu 12.4 from a dvd drive apart, when I installed told me that was already installed, it saids that if you wanted to install ubuntu 12.4 with ubuntu 12.4 and I did it, but now I have two ubuntu 12.4 and also can not find my files . What I can do?

    Read the article

  • have to plug/un-plug usb devices on system booting?

    - by user866581
    it's so weired that i have to plug/unplug in my usb devices every time booting ubuntu. it happens for both installing ubuntu and booting ubuntu (10.10 and 11.10) the scenario is like: 1.bios checking - 2.grub start - 3.keyboard & mouse led OFF (black screen with a cursor on top-left) - 4.i plug/unplug in any usb devices - 5.everything is back to normal and ubuntu started it's really frustrating :( please advise the solution.

    Read the article

  • How to run video from total commander(wine)?

    - by 101
    When I click on video file nothing happens, I tried to make a link to it /media/DATA/#TO_BACKUP/_MUSIC/MUSIC2/Black Eyed Peas - The Time (Dirty Bit).avi but it says Failed to execute child process "/media/DATA/" (Permission denied) Opening the full location from MediaPlayer does not work (open location) Location not found I can open it slowly by navigating in the slow file open dialog, but I would like to open it from totalcmd or by created link or by passing full location. P.S. Before that I have opened the DATA Partition.

    Read the article

  • Can't access my admin ubuntu account

    - by Kermilli
    It just shows a black screen with words in it for a fraction of a second and then gets back to users screen(where you choose your user). I tried to enter from another account and removed the password for the admin account , but it didn't work too , and then I couldn't access my admin privileged places with my old password ? What should I do ? I tried to change my password from recovery but no success.

    Read the article

  • Ubuntu 13.04 Raring Ringtail not booting

    - by Kristjan
    Hello my problem is getting annoying. Its my hard drive whats being funny i guess but here's the problem , before updating ubuntu everything was fine , and now im stuck on loading screen with white and orange dots , when i press S the system crashes and gives black screen and ctrl+alt+f1 doesnt show anything , system works fine on liveCD but i want it working on harddrive , any suggestions what to do , if i can access harddrive but not system itself? how i could fix it? i hope someone can help me out real soon.

    Read the article

  • my ipod is froze or something please help me

    - by Cait P
    okay iI have no clue what to do iI have tried the most common ways to fix it and nothing has work it has 4 gb Idk what generation or anything iI bought it from my aunt but here is the problem when iI first got it it worked fine iI plugged it into my computer to put music on it and it screwed up ever since it has showed the apple screen then flashes black over and over until it dies i cannot turn it on at all my computer doesn't even register it when iI plug it up idon't know what to do and iI really want it to work please help someone?

    Read the article

  • I dont' know how to install?

    - by Muktar Gazaie
    I've downloaded the USB version from the web site, and the USB Installer, then I run it and it finished, but then nothing happens, I tried to go to ISO and run the setup then It finished and restarted the computer with Windows, Iv'e tried to restart it again and choose Ubuntu but it launches a black screen with some texts and nothing happens, please help me I'm very new to Ubuntu and I need to download it because my Windows is pretty awful!

    Read the article

  • Installing Ubuntu 12.04 shut down?

    - by jrr
    i have installed ubuntu before on my old laptop, i remember it was a breeze. Now im trying to install it on my desktop and i am stuck. i tried the Windows installer, when restarted and selected linux, the pc went to black screen the shut down... tried with cd, i got the ubuntu purple screen, then shut down. its an intel i5 build with 8G ram and asus motherboard...(don't know if it makes any difference) any help?

    Read the article

  • Top Ten SEO Don'ts

    SEO is built around an ever changing set of algorithms, and has evolved throughout the years. The internet is a constantly changing medium, and one of the worst things you can do is used out of date or obsolete SEO methods. Many old tactics are now considered 'black-hat', meaning they are looked down on by the SEO community and can bring down penalties fro search engines.

    Read the article

  • ?????? ??????????!?Bronze???? vol.11

    - by M.Morozumi
    ???????????????????????????????????????????????????????????????????  ???ORACLE MASTER Bronze Oracle Database 11g???????????????????????  ------------------------------- ????: REPLACE ?????????JACK and JUE?????????J???BL??????????????BLACK and BLUE??????????????????? REPLACE ?????????????????1????????? ???: REPLACE('JACK and JUE', 'BL', 'J') REPLACE('JACK and JUE', 'J', 'BL') ????????????? ???????????????

    Read the article

  • Vim: Custom Folding function done, custom highlighting required

    - by sixtyfootersdude
    I have defined a function in vim to properly indent folds. Ie so they look like this: Unfolded this is text also text indented text indented text not indented text folded with default function this is text also text +-- 2 lines: indented text ---------------------------- not indented text folded with my new function this is text also text ++- 2 lines: indented text ---------------------------- not indented text The only problem is the the highlighting is still like this: folded with my new function (highlighting shown with tag) this is text also text <hi> ++- 2 lines: indented text ----------------------------</hi> not indented text I would like the highlighting to start at the ++ and not at the beginning of the line. I have looked in the vim manual but could not find anything like that. One so-so solution I found was to make the background black. highlight Folded ctermbg=black ctermfg=white cterm=bold But this make folds less visible. I have tried several variations of: syn keyword Folded lines syn region Folded ... But I don't think that this is the way that folds are selected. Can anyone offer a suggestion? By the way this is my function to indent the folds: set foldmethod=indent function! MyFoldText() let lines = 1 + v:foldend - v:foldstart let ind = indent(v:foldstart) let spaces = '' let i = 0 while i < ind let i = i+1 let spaces = spaces . ' ' endwhile let linestxt = 'lines' if lines == 1 linestxt = 'line' endif return spaces . '+' . v:folddashes . ' '. lines . ' ' . linestxt . ': ' . getline(v:foldstaendfunction endfunction au BufWinEnter,BufRead,BufNewFile * set foldtext=MyFoldText() By the way thanks to njd for helping me get this function setup.

    Read the article

  • New Computer freezing up at random

    - by Benjamin Frost
    Since I built my system about 4 weeks ago I'v been getting random freezes, Sometimes it can happen directly after startup and sometimes it wont freeze up for 3-4 days of 24/7 running. It seems to be happening under all stress loads but mainly when the CPU is under 10% load. It doesn't give me a BSOD or anything, it simply just freezes and repeats the last sound before the freeze until I shut it down by the power button. I'v re-seated everything in the system except the CPU, Cleaned the RAM sockets and gold fittings. None of the components have been clocked above their factory settings as of yet, don't want to overclock them until I sort out these freezes. Temps are all well under the rated max temps, the highest the temps have been are below CPU: Low load: 16-21°C Full Load (100%) 40-43°C *(From HWMonitor by CPUID) GPU 1: Low Load: 25-30°C Full Load (100%): 45-50°C GPU 2: Low Load: 23-27°C Full Load (100%): 45-50°C *(GPU Temps from Catalyst Control Center) General Case temps Rear: 18-20°C Mid: 20-21°C Front (HDD/SSD Bays): 14-19°C (Case temps may be a little off as it's from the Kaze master pro fan controller) I have Un-installed EVERY driver for Motherboard, GPU & Soundcard and Re-installed twice. Windows is all up to date. To date i'v tried the following Running Memtest for 24 hrs straight, No errors Running Memtest on each individual RAM modules, No errors Reseated everything except the CPU Cleaned DIMM Sockets and Gold inputs Tested the Graphics cards 1 at a time Re-arranged all the SATA devices to run on Chipset controlled ports Re-installing all drivers OS: Win7 Professional 64bit Motherboard: ASRock X79 Extreme9 CPU: i7 3930k 3.2GHz GPU: Sapphire 7950 OC Edition V2 (2 card Crossfire) RAM: G.Skill Ripjaws Z F3-17000CL11Q-16GBZL 16GB (4x4GB) DDR3 Boot Drive: OCZ Agility 4 128GB Data Drive 1: Western Digital Black 2TB Data Drive 2: Western Digital Black 2TB Data Drive 3: Western Digital Green 3TB Power Supply: Corsair AX1200 Gold

    Read the article

  • Windows Vista: Screen remains darkened for 30-60 seconds *after* UAC prompt

    - by sf2k
    Fixing someone's Vista computer. Process: I click any program or process that opens a User Account Control prompt. Screen goes dim so you may hit Continue to perform a secure user action. I click Continue Screen goes black for 30 seconds to 1 minute while you wait for the screen to return. In another example I click Cancel and screen still then goes black for 30 seconds to a minute. In that timeframe a chime goes off while you wait. (No chime if it was being cancelled.) Then screen comes back to continue with whatever. Something is occurring after the UAC prompt. Considering everything is practically a UAC acceptance this can get pretty annoying pretty quickly. Laptop has external monitor to regular external plug. Works fine. Laptop also has USB IOGEAR additional external video card. This is problematic but when unplugged same above behaviour occurs. I've ruled out monitor interference since same blackout after the UAC prompt appears with external monitors plugged in or when rebooted with no external monitors. Any suggestions on how to address this problem?

    Read the article

  • How to generate thumbnails for less common video containers (mkv, ogm, mp4, flv, rmvb and mov) in wi

    - by fluxtendu
    So how to generate thumbnails for these containers? I know that the install of "DivX Plus Tech Preview: MKV on Windows 7" does it for MKV. But I think that only some registry changes are really necessary and I want it for other containers. If it's possible to avoiding the install of (always bloated) codecs packs it would be nice... Maybe only installing ffdshow or essential and separated codecs. (some time ago I have try reg files for vista without success...) Update: I have installed Win7codecs & tweaked a little its settings and I got almost everything I want. (I have also re-installed the relevant part of the divx plus tech preview to get something else than an all black preview for MKV) Issues that I still want to resolve: Find a cleaner & lighter method Almost all my rmvb and mov files got an all black preview (installing real media/quick time alternative doesn't help, is it the same with the officials?) With almost all containers (avi, mkv, ogm, mpg), I have (few) random files that don't get the preview. I could play them in WMP or another player and don't have found a pattern in the codecs used. All wmv, flv and mp4 have previews but I have less files in these containers. (I clear my thumbnails cache to test them) More generally I would like to understand how windows handle the containers & codecs to generate the previews. And a software that let me choose arbitrarily the pictures previewed would be convenient too

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >