Search Results

Search found 9125 results on 365 pages for 'boot disc'.

Page 52/365 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • Changing the Operating System with only Ubuntu installed

    - by Games Brainiac
    I really wanted to dive into the world of Open Source operating systems, so I downloaded the latest version of Ubuntu (13.10), and installed it on a clean(no operating system installed, absolutely nothing) Lenovo ThinkPad machine. After a few days, I wanted to try out a different Operating System (Elementary OS). I downloaded the ISO file, burned it to a USB, tested that the USB booted from a different computer (I have 2, one is the Lenovo, the other a HP). I was able to get the bootscreen, and everything worked like a charm after I set the BIOS to boot from USB Disk Drive instead of HD. After this, I went back to Lenovo, and tried to open up the boot menu, by pressing F12, so that I could load from a temporary device. To my surprise, nothing but the HD was listed. There was no Optical Drive, No USB Drive, absolutely nothing. So, I thought that these devices were probably disabled. So I went into my BIOS and checked to see what was the case. I saw that all my devices were enabled. USB and all the other devices such as network cable and the rest were all enabled. So, I thought this probably had something to do wit UEFI and Legacy Boot options. So, I made sure that both were enabled. This did not solve the problem either. Again, I got nothing but the option to boot from my Hard Disk. I thought the USB had to be at fault. I tried different ports, but to no avail. Next, I tried with a Live CD, which had Ubuntu on it. This failed too. I simply could not boot from anything other than my hard disk. Okay, so at this point, I was pretty desperate, so I installed Boot-Repair through: sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install boot-repair What this did is lead me to GRUB. Ideally, its just a screen that gives me the option to load from Ubuntu or Advanced Settings. The Advanced settings had nothing but Ubuntu options in it. So, I kept on pressing ESC and that led me to the the grub console, and thats where I am right now with my Lenovo. I've also tried updating the BIOS, but Lenovo only has packages for Red Hat and Windows. So, a dead end there too. Right now, I need to know if there is any way that I can just delete everything from my Lenovo? I want to revert it back to its blank factory condition. How can I achieve this? I have tried to elaborate my problem as best I could. If there is any important information that I've missed out, please do not hesitate to leave a comment. I would have included some screen shots, but BIOS screen shots are a little hard to manage. However, I can provide a camera Image of the boot screen if needed (doing that as we speak).

    Read the article

  • Skip kernel module at boot

    - by Gris
    Hello. There is a broken kernel module, due to which I can not even load the OS, so I can not delete or fix it. Is it possible to skip this module at boot, using the kernel's parameters or something? Thanks.

    Read the article

  • shell script to start multiple Java programs from a directory at boot

    - by zcourts
    I'm not sure if this is the best approach to this, It's my first time doing all of this (including writing shell scripts). OS: Centos My problem: I want to start multiple shell scripts at boot. One of the shell scripts is to start my own services and 3 others are for third party services. The shell script to start my own services will be looking for jar files. I currently have two services (will change), written in Java. All services are named under convention prefix-service-servicename What I've done: I created the following directory structure /home/username/scripts init.sh boot/ boot/startthirdprtyservice1.sh boot/startthirdprtyservice2.sh boot/startthirdprtyservice3.sh boot/startmyservices.sh /home/username/services prefix-lib-libraryname.jar prefix-lib-libraryname.jar prefix-service-servicename.jar prefix-service-servicename.jar prefix-service-servicename.jar In init.sh I have the following: #!/bin/sh #This scripts run all executable scripts in the boot directory at boot #done by adding this script to the file /etc/rc.d/rc.local #nohup #run-parts /home/username/scripts/boot/* #for each file in the boot dir... # ignore the HUP (hangup) signal for s in ./boot/*;do if [ -x $s ]; then echo "Starting $s" nohup $s & fi done echo "Done starting bootup scripts " echo "\n" In the script boot/startmyservices.sh I have #!/bin/sh fnmatch () { case "$2" in $1) return 0 ;; esac ; return 1 ; } ##sub strin to match for SUBSTRING="prefix-service" for s in /home/username/services/*;do if [ -x $s ]; then #match service in the filename , i.e. only services are started if fnmatch "$SUBSTRING" "$s" ; then echo "Starting $s " nohup $s & fi fi done echo "Done starting Services" echo "\n" Finally: Usually you can stick a program in /etc/rc.d/rc.local for it to be run at boot but I don't think this works in this case, or rather I don't know what to put in there I've just learnt how to do this by reading up a bit so I'm not sure its particularly the best thing to do so any advice is appreciated. When I run init.sh nohup.out contains Starting the thirdparty daemon... thirdparty started... .... but nothing from myservices.sh and my Java services aren't running I'm not sure where to start debugging or what could be going wrong. Edit Found some issues and got it to work, used -x instead of -n to check if the string is none zero, needed the sub string check to also be if [[ $s = $SUBSTRING ]] ; then and this last one was just stupid, missing java -jar in front of $s Still unsure of how to get init.sh to run at boot though

    Read the article

  • Unknown file system : grub Rescue

    - by Rahul Rodrigues
    I have Lenovo Y560 Laptop on which installed Windows 7 and Ubuntu 11.10 as dual boot.Due to some reason i had to recover boot loader using bootrec.exe /fixmbr and bootrec.exe /fix boot,It created one partition of size 198MB named "tet" and my both os were working fine. Ysterday while making some changes in partition table i deleted that "tets" partition and after reboot im getting following error Error:unknow filesystem grub rescue i tried to boot from windows installer cd and but it stucks at "starting windows" so not able to run commands which i have mentioned earliar and tried to boot from Ubuntu 11.10,it stucks after showing following error memory full can't kill anymore process. Please help me out

    Read the article

  • No keyboard input until after GRUB

    - by Dave M G
    I have a computer that I dual boot between Ubuntu 11.10 and Windows 7. I installed Windows first, and Ubuntu second. When I boot, the GRUB menu comes up, showing me the option to select to boot to Ubuntu at the top of the list, and to boot to Windows at the bottom. Unfortunately, as far as I can tell, any key I press on the keyboard (connected by USB) does not get any response, so I can't actually select to boot to anything but Ubuntu (which is the default selection). Once Ubuntu loads and I am at the log in screen, then the keyboard (and mouse) work perfectly normally thereafter. Why would my keyboard not work only during GRUB? And how do I fix it?

    Read the article

  • Where did my hard drive go?

    - by Mike Carron
    I installed XBMCbuntu 11.0 to my Zotac Zbox AD03 with an OCZ Reflex 4 256gb SSK. The install worked fine and I was getting accustomed to the appearance and operation. When I attempted to boot from power-off the BIOS could no longer find the SSD. It refused to boot and when I checked in the BIOS, the SSD was missing from the boot list (it was there prior to the install). I rebooted from the install CD but when the system started it could not find the SSD. I replaced the SSD with a fresh one of the same type and reinstalled XBMCbuntu. This time I rebooted from the system several times successfully but when I shut it down and tried to cold boot, this drive was also gone. Does the installation do something strange to the boot record that could cause a BIOS to lose it? How do I fix this? mike

    Read the article

  • How to reboot into Windows from Ubuntu?

    - by andrewsomething
    I'm looking for a way to reboot into Windows from Ubuntu on a 10.10/Vista dual boot system. The specific use case is that I would like to be able to ssh into my running Ubuntu instance and issue a command that will initiate a reboot directly into Windows. I found a promising blog post, but the script that it suggests isn't working: #!/bin/bash WINDOWS_ENTRY=`grep menuentry /boot/grub/grub.cfg | grep --line-number Windows` MENU_NUMBER=$(( `echo $WINDOWS_ENTRY | sed -e "s/:.*//"` - 1 )) sudo grub-reboot $MENU_NUMBER sudo reboot man grub-reboot isn't much help, but it seems to be leading me in the right direction: set the default boot entry for GRUB, for the next boot only WINDOWS_ENTRY=`grep menuentry /boot/grub/grub.cfg | grep --line-number Windows` MENU_NUMBER=$(( `echo $WINDOWS_ENTRY | sed -e "s/:.*//"` - 1 )) echo $MENU_NUMBER This returns the expected value, but on reboot the first menu entry is still highlighted. Any ideas why this isn't working or suggestions for other solutions?

    Read the article

  • Remove ubuntu and install windows 8 on ultrabook

    - by Vegard Lokreim
    My computer (ultraboook : HP Envy 4 ) wont find the bootable windows usb. Unless its a ubuntu usb it wont show in boot selection (F9). I installed ubnutu as the one and only OS, and now i want to install windows as the only OS. The only problm is that my computer wont boot from the bootable usb. I think it has something to do with the boot settings that ubuntu has made to my computer.... I really need an answare as soon as possible, please help. Ive created a bootable windows usb in both windows and ubunut, and it still wont boot from the bootable usb, i also have a 300gb NTFS partition at the beginning of the harddrive, and it still wont boot into windows. I have a 32gb SSD and 500 gb SATA-HDD How can i get the system to recognize the bootable USB?

    Read the article

  • How do I modify the noacpi option?

    - by Sagar Ratnakara Nikam
    I am new to ubuntu and have stared using it since a week. I installed ubuntu server 11.10 on a VM created using VMWare player. Once installed, i tried to install ubuntu desktop using sudo apt-get install --no-install-recommends ubuntu-desktop Now I am unable to boot and i get the following error *PulseAudio configured per-user session After this, nothing happens and the ubuntu server does not boot. I read in another Q&A, the same problem and the solution. Just Installed a CLI system then ubuntu-desktop, does not boot automatically My question is how to modify noacpi option. How do i get into the boot for the ubuntu server? I have read on the net that by hitting the shift button, we can get into the boot options. I tried that, but no success, probably since i am running ubuntu on VMWare Player. Please guide me on how to solve this problem

    Read the article

  • windows system (bootloader) partition accidently deleted during multiple installs

    - by S.Y.T.
    After experimenting with multiple variations of backtrack and xbmcbuntu variations of Ubuntu with dual boot successfully, my windows partition became unrecognizable to grub. I used my windows boot CD to try to correct the problem. However, I deleted all partitions except for the NFTS one that contains my old windows install. (And, merged all other ones into that in hopes of getting back to the windows boot loader and out of grub) Now, all I get is a grub command prompt when I try and boot the system (how??? - I thought I deleted grub) And, now the windows boot disc doesn't even recognize the install. I've tried TRK to try and resolve the problem. Though I must admit ignorance in correctly using this utility. I've searched for other answers to this problem. Any help would be much appreciated. S.Y.

    Read the article

  • Cannot dual boot Ubuntu 12.10 with windows 8.

    - by Noman
    I have tried automatic partition, i Have did the partition myself but Ubuntu installs alright. But when i restart the computer it goes back to windows 8 and i Have tried easybcd boot manager but it didn't work either. I displays ubuntu on the dual boot screen but after a while the screen shutdowns and say it didn't find the boot file or the boot file was missing? Do you guys know how to solve this problem? any suggestions?

    Read the article

  • Ubuntu 14.04 not booting before Windows 8.1

    - by user280244
    I try too boot my computer into Ubuntu, but I end up having to manually select Ubuntu from the devices menu, even though it was supposed to boot first. Instead Windows 8 boots up like Ubuntu isn't even there! And GRUB works just fine when Ubuntu is selected in the boot device menu. (How else am I on?) I tried using EasyBCD but kept getting errors from the windows boot manager. And just in case it helps, during installation of Ubuntu it didn't recognize windows 8, and I had to resize and install manually. Anything I can do? Notes: EVERYONE!!! GRUB WORKS PERFECTLY!!! IT IS AN ERROR IN THE HP BOOT MENU AS I HAVE PREVIOUSLY SAID!!! PLEASE DO NOT GIVE ME ANSWERS FOR GRUB EDITS IN THE FUTURE!!! Here are my specs: PC type: HP 2000-2d49WM Notebook PC RAM: 4GB Swap: 2GB Processor: AMD E-300 Vision 1.3 GHz x2 BIOS Edition: N\A Until further notice

    Read the article

  • Why do I get Detached Entity exception when upgrading Spring Boot 1.1.4 to 1.1.5

    - by mmeany
    On updating Spring Boot from 1.1.4 to 1.1.5 a simple web application started generating detached entity exceptions. Specifically, a post authentication inteceptor that bumped number of visits was causing the problem. A quick check of loaded dependencies showed that Spring Data has been updated from 1.6.1 to 1.6.2 and a further check of the change log shows a couple of issues relating to optimistic locking, version fields and JPA issues that have been fixed. Well I am using a version field and it starts out as Null following recommendation to not set in the specification. I have produced a very simple test scenario where I get detached entity exceptions if the version field starts as null or zero. If I create an entity with version 1 however then I do not get these exceptions. Is this expected behaviour or is there still something amiss? Below is the test scenario I have for this condition. In the scenario the service layer that has been annotated @Transactional. Each test case makes multiple calls to the service layer - the tests are working with detached entities as this is the scenario I am working with in the full blown application. The test case comprises four tests: Test 1 - versionNullCausesAnExceptionOnUpdate() In this test the version field in the detached object is Null. This is how I would usually create the object prior to passing to the service. This test fails with a Detached Entity exception. I would have expected this test to pass. If there is a flaw in the test then the rest of the scenario is probably moot. Test 2 - versionZeroCausesExceptionOnUpdate() In this test I have set the version to value Long(0L). This is an edge case test and included because I found reference to Zero values being used for version field in the Spring Data change log. This test fails with a Detached Entity exception. Of interest simply because the following two tests pass leaving this as an anomaly. Test 3 - versionOneDoesNotCausesExceptionOnUpdate() In this test the version field is set to value Long(1L). Not something I would usually do, but considering the notes in the Spring Data change log I decided to give it a go. This test passes. Would not usually set the version field, but this looks like a work-around until I figure out why the first test is failing. Test 4 - versionOneDoesNotCausesExceptionWithMultipleUpdates() Encouraged by the result of test 3 I pushed the scenario a step further and perform multiple updates on the entity that started life with a version of Long(1L). This test passes. Reinforcement that this may be a useable work-around. The entity: package com.mvmlabs.domain; import javax.persistence.Column; import javax.persistence.Entity; import javax.persistence.GeneratedValue; import javax.persistence.GenerationType; import javax.persistence.Id; import javax.persistence.Table; import javax.persistence.Version; @Entity @Table(name="user_details") public class User { @Id @GeneratedValue(strategy=GenerationType.AUTO) private Long id; @Version private Long version; @Column(nullable = false, unique = true) private String username; @Column(nullable = false) private Integer numberOfVisits; public Long getId() { return id; } public void setId(Long id) { this.id = id; } public Long getVersion() { return version; } public void setVersion(Long version) { this.version = version; } public Integer getNumberOfVisits() { return numberOfVisits == null ? 0 : numberOfVisits; } public void setNumberOfVisits(Integer numberOfVisits) { this.numberOfVisits = numberOfVisits; } public String getUsername() { return username; } public void setUsername(String username) { this.username = username; } } The repository: package com.mvmlabs.dao; import org.springframework.data.repository.CrudRepository; import com.mvmlabs.domain.User; public interface UserDao extends CrudRepository<User, Long>{ } The service interface: package com.mvmlabs.service; import com.mvmlabs.domain.User; public interface UserService { User save(User user); User loadUser(Long id); User registerVisit(User user); } The service implementation: package com.mvmlabs.service; import org.springframework.beans.factory.annotation.Autowired; import org.springframework.stereotype.Service; import org.springframework.transaction.annotation.Propagation; import org.springframework.transaction.annotation.Transactional; import org.springframework.transaction.support.TransactionSynchronizationManager; import com.mvmlabs.dao.UserDao; import com.mvmlabs.domain.User; @Service @Transactional(propagation=Propagation.REQUIRED, readOnly=false) public class UserServiceJpaImpl implements UserService { @Autowired private UserDao userDao; @Transactional(readOnly=true) @Override public User loadUser(Long id) { return userDao.findOne(id); } @Override public User registerVisit(User user) { user.setNumberOfVisits(user.getNumberOfVisits() + 1); return userDao.save(user); } @Override public User save(User user) { return userDao.save(user); } } The application class: package com.mvmlabs; import org.springframework.boot.SpringApplication; import org.springframework.boot.autoconfigure.EnableAutoConfiguration; import org.springframework.context.annotation.ComponentScan; import org.springframework.context.annotation.Configuration; @Configuration @ComponentScan @EnableAutoConfiguration public class Application { public static void main(String[] args) { SpringApplication.run(Application.class, args); } } The POM: <?xml version="1.0" encoding="UTF-8"?> <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>com.mvmlabs</groupId> <artifactId>jpa-issue</artifactId> <version>0.0.1-SNAPSHOT</version> <packaging>jar</packaging> <name>spring-boot-jpa-issue</name> <description>JPA Issue between spring boot 1.1.4 and 1.1.5</description> <parent> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-parent</artifactId> <version>1.1.5.RELEASE</version> <relativePath /> <!-- lookup parent from repository --> </parent> <dependencies> <dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-data-jpa</artifactId> </dependency> <dependency> <groupId>org.hsqldb</groupId> <artifactId>hsqldb</artifactId> <scope>runtime</scope> </dependency> <dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-test</artifactId> <scope>test</scope> </dependency> </dependencies> <properties> <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding> <start-class>com.mvmlabs.Application</start-class> <java.version>1.7</java.version> </properties> <build> <plugins> <plugin> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-maven-plugin</artifactId> </plugin> </plugins> </build> </project> The application properties: spring.jpa.hibernate.ddl-auto: create spring.jpa.hibernate.naming_strategy: org.hibernate.cfg.ImprovedNamingStrategy spring.jpa.database: HSQL spring.jpa.show-sql: true spring.datasource.url=jdbc:hsqldb:file:./target/testdb spring.datasource.username=sa spring.datasource.password= spring.datasource.driverClassName=org.hsqldb.jdbcDriver The test case: package com.mvmlabs; import org.junit.Assert; import org.junit.Test; import org.junit.runner.RunWith; import org.springframework.beans.factory.annotation.Autowired; import org.springframework.boot.test.SpringApplicationConfiguration; import org.springframework.test.context.junit4.SpringJUnit4ClassRunner; import com.mvmlabs.domain.User; import com.mvmlabs.service.UserService; @RunWith(SpringJUnit4ClassRunner.class) @SpringApplicationConfiguration(classes = Application.class) public class ApplicationTests { @Autowired UserService userService; @Test public void versionNullCausesAnExceptionOnUpdate() throws Exception { User user = new User(); user.setUsername("Version Null"); user.setNumberOfVisits(0); user.setVersion(null); user = userService.save(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(1), user.getNumberOfVisits()); Assert.assertEquals(new Long(1L), user.getVersion()); } @Test public void versionZeroCausesExceptionOnUpdate() throws Exception { User user = new User(); user.setUsername("Version Zero"); user.setNumberOfVisits(0); user.setVersion(0L); user = userService.save(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(1), user.getNumberOfVisits()); Assert.assertEquals(new Long(1L), user.getVersion()); } @Test public void versionOneDoesNotCausesExceptionOnUpdate() throws Exception { User user = new User(); user.setUsername("Version One"); user.setNumberOfVisits(0); user.setVersion(1L); user = userService.save(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(1), user.getNumberOfVisits()); Assert.assertEquals(new Long(2L), user.getVersion()); } @Test public void versionOneDoesNotCausesExceptionWithMultipleUpdates() throws Exception { User user = new User(); user.setUsername("Version One Multiple"); user.setNumberOfVisits(0); user.setVersion(1L); user = userService.save(user); user = userService.registerVisit(user); user = userService.registerVisit(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(3), user.getNumberOfVisits()); Assert.assertEquals(new Long(4L), user.getVersion()); } } The first two tests fail with detached entity exception. The last two tests pass as expected. Now change Spring Boot version to 1.1.4 and rerun, all tests pass. Are my expectations wrong? Edit: This code saved to GitHub at https://github.com/mmeany/spring-boot-detached-entity-issue

    Read the article

  • How to use BCDEdit to dual boot Windows installations?

    - by Ian Boyd
    What are the bcdedit commands necessary to setup dual boot between different installations of Windows?5 Background i recently installed Windows 8 onto a separate hard drive1. Now that Windows 8 in installed i want to dual-boot back to Windows 7. i have my two2 hard drives: So you can see that i have my two disks, with the partitions containing Windows: Windows 7: \\PhysicalDisk0 (partition 03) Windows 8: \\PhysicalDisk2 (partition 1) What i'm trying to figure out how is how to use bcdedit to instruct the thing that boots Windows that there is another Windows installation out there. Running bcdedit now, it shows current configuration: C:\WINDOWS\system32>bcdedit Windows Boot Manager -------------------- identifier {bootmgr} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {globalsettings} integrityservices Enable default {current} resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Windows Boot Loader ------------------- identifier {current} device partition=C: path \WINDOWS\system32\winload.exe description Windows 8 locale en-US inherit {bootloadersettings} recoverysequence {ce153eb9-3786-11e2-87c0-e740e123299f} integrityservices Enable recoveryenabled Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \WINDOWS resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto i cannot find any documentation on the difference between Windows Boot Manager and Windows Boot Loader. Documentation There is some documentation on Bcdedit: Technet: Command Line Reference - Bcdedit Technet: Windows Automated Installation Kit - BCDEdit Command Line Options Whitepaper - BCDEdit Commands for Boot Environment (Word Document) But they don't explain how edit the binary boot configuration data If i had to guess, i would think that a Windows Boot Manager instructs the BIOS what program it should run. That program would give the user a set of boot choices. That leaves Windows Boot Loader do be a particular boot choice, that represents a particular installation of Windows. If that is the case i would need to create a new Windows Boot Loader entry. This means i might want to use the /create parameter: /create Creates a new boot entry: bcdedit [/store filename] /create [id] /d description [/application apptype | /inherit [apptype] | /inherit DEVICE | /device] So i assume a syntax of: >bcdedit /create /d "The old Windows 7" /application osloader Where application can be one of the following types: Apptype Description BOOTSECTOR The boot sector application OSLOADER The Windows boot loader RESUME A resume application Unfortunately, the only documentation about osloader is "The Windows boot loader". i don't see how that can differentiate between Windows 8 on one hard drive, and Windows 7 on another. The other possible parameter when /create a boot loader is >bcdedit /create /D "Windows Vista" /device "The Quick Brown Fox" Unfortunately the documentation is missing for /device: /device Optional. If id is not set to a well-known identifier, the option that is used to specify the new boot entry as an additional device options entry. Since i did not set id to a well-known identifier, i must set /device to "the option that is used to specify the new boot entry as an additional device options entry". i know all those words; they're all English. But i have on idea what it is saying; those words in that order seem nonsensical. So i'm somewhat stymied. i don't want to be like Dan Stolts from Microsoft: I found no content that was particularly helpful when I hosed my machine by playing with BCDEdit. This post would have been ok if there was much more detail especially on the /set command OSDevice, etc. So once I got my machine fixed, I documented the solution and the information is here.... i mean, if a Microsoft guy can't even figure out how to use BCDEdit to edit his BCD, then what chance to i have? Bonus Reading BCDEdit Command-Line Options Bcdedit Server 2008 R2 or Windows 7 System Will NOT Boot After Making Changes To Boot Manager Using BCDEdit Visual BCD Editor4 Windows 7 and Windows 8 RTM Dual Boot Setup Footnotes 1 Since the Windows 8 installer would have damaged my Windows 7 install, i decided to unplug my "main" hard drive during the install. Which is a long-winded explanation of why the Windows 8 installer didn't detect the existing Windows 7 install. Normally the installer would have automatically created the required entries for dual-boot. Not that the reason i'm asking the question is important. 2 Really there's three drives, but the third is just bulk storage. The existence of a 3rd hard drive is irrelevant to the question. i only mention it in case someone wants to know why the screenshot has 3 hard drives when i only mention two. 3 i arbitrarily started numbering partitions at "zero"; not to imply that partitions are numbered starting at zero. i only mention partitions because i don't see how any boot-loader could do its job without knowing which partition, and which folder, an installation of Windows is located in. 4 i'm asking about BCDEdit. i tried Visual BCD Editor. It seems to be a visual BCD editor. That is to say that it's a GUI, but still uses the same terminology as BCDEdit, and requires the same knowledge that BCD doesn't document. 5 For simplicity sake we'll assume that all installation of Windows i want to dual-boot between are Windows Vista or later, making them all compatible with the BCDEdit and the binary boot loader. The alternative would require delving into the intricacies of the old ntloader. Nor am i asking about dual booting to Linux; or how to boot to a Virtual Hard Drive (vhd) image. Just modern versions of Windows on existing hard drives in the same machine. Note: You can ignore everything after the word Background. It's all pointless exposition to satisfy some people's need for "research effort" before they'll consider being helpful. Some people have even been known to summarily close questions unless there is research effort. Some people have been know to close questions if there is too much research effort. Some people close questions when i put the note saying that they can ignore everything after the Background out of spite. Some people are just grumpy.

    Read the article

  • What environment variables available while starting the script using init.d boot process

    - by raj_arni
    My problem is like this (OS is Sun Solaris): 1) At the boot time I want to start a process using a specific script. I am doing this by putting this script in /etc/init.d (and following other K and S rules) 2) The program which will be called by the script is located at $HOME/xxx/yyy location. 4) I am using 'su - {myuser} -c "{full path of the program}"' in order to execute the script as {myuser} 3) I dont want to hardcode the value of $HOME in the script but want to use the $HOME env variable only. How can I get this $HOME env variable in the shell script? Also what other variables will be available to me?

    Read the article

  • [C#] Boot problem

    - by Cecco
    Hi guys, I'm running on Windows 7 and I've a problem with my app at boot. Within my app I use some threads and external dll (sqlite3.dll, etc...). I've included these lines at first of my start.exe file: RegistryKey rkApp = Registry.CurrentUser.OpenSubKey("SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Run", true); String p = System.Environment.CommandLine.Replace("vshost.",""); String pp = p.Remove(p.Length-1); rkApp.SetValue("MyAPP", pp); If I start my app manually from exe file (or with VisualStudio) works correctly. If I start my app on reboot, MyApp crashes after few seconds. Why I've this problem?

    Read the article

  • Ubuntu 12.10 boots to purple or black screen but intermittently boots fine

    - by Nic
    I have a fresh install of Ubuntu 12.10 64bit dual booting with Win7 64bit. Windows boots fine every time. When I choose Ubuntu from Grub2 menu it will sometimes boot just fine. Most of the times though it gets stuck at a purple screen with nothing happening and no keys or key combinations working. Other times instead of the purple screen I get a black screen with a flashing cursor at the top. Nothing happens. I need to hold down the power button to restart and after a couple times of trying it will eventually boot into Ubuntu. Once that happens everything runs without any problems. I have tried different approaches to fix the problem but to no avail. I tried removing "quiet splash", used no splash, and nomodeset What I got from this was seeing all the text of the boot process but more often than not the process gets stuck right after recognizing all the USB ports and devices. If it gets stuck nothing happens (except when i plug in a usb device: it still recognizes it with a new line of text) In the case when the boot process works, after it lists the usb devices it tells me something like: recovery of read-only filesystem necessary. (its the filesystem that ubuntu runs on) then it does the recovery and i get: recovery complete. after that Ubuntu will boot properly and I get to see the login screen. I have no idea what to do to fix that problem. I have to reboot 3 to 5 times everytime I want to get into Ubuntu and I feel like I'm breaking my new Laptop. (its a lenovo ideapad z580 btw. i5 processor and nvidia gtx640 graphics card) I hope someone can help me. Thanks. Edit: i just got a "failed to enable AA error" message when waking it up from suspend. I don't know if that helps or has anything to do with the boot probs.

    Read the article

  • Dualboot (Win 8 / Ubuntu 13) is stuck at 'switching to clocksource'

    - by Daniel Puscht
    for days I have been crawling the web for solutions to my problem, but couln't find any. Here it is: I got a new Laptop (ASUS Vivobook S200E) with Win 8 OEM preinstalled. I wanted to create a dual-boot system with Ubuntu 13 next to it. I read about UEFI and that I have to turn of Secure Boot and use the existing EFI partition as bootloader for Ubuntu. So I did. I also ran boot-repair reinstalling the GRUB. The result is when I start the computer I get into the boot menu. So far, so good. When I pick Win everthing is fine. But when I choose Ubuntu (recovery) the system starts, but gets stuck at the line '[1.806366] Switching to clocksource tsc'. I already tried other versions of Ubuntu (12.04.2, 12.10). I played with boot-repair (using the recommended fix, setting everything manually). But nothing works. It's always the same issue. I read that it could be a problem concerning graphic drivers, but this I can hardly believe. If this is any help, boot-repair gave me this link to post in fora. http://paste.ubuntu.com/5810391/ Thanks for any help in advance

    Read the article

  • Installing Windows from Ubuntu while booting only from the hard drive

    - by WindowsEscapist
    My problem is unrelated to this workaround (the question) here, but the end result is that I cannot change boot order (or use a boot menu) on my laptop. It is currently running Ubuntu 12.04 with a dual-boot to Fedora if anything goes catastrophically wrong with Ubuntu (read "if I mess it up"). I would really like to install Windows 7 (but XP would be fine) on an empty FAT32 partition I have already made because of issues with WINE-emulated programs running more slowly than under Windows. The problem is, I can only boot from my hard drive. I can boot from other devices by removing the hard drive, but this is irrelevant because SATA is non-hotpluggable (I can't plug it back in to install). Is there any way I could boot up a Windows installer CD (or other CDs)? (I know how to keep my Linux distros.) I have both the .iso's and the physical CDs (or can obtain them). This may be unneeded, but just as a disclaimer this is completely legal. The computer belongs to me, I have admin privs, etc. I'm not doing anything shady!

    Read the article

  • Disc drive busy on MacBook, with disc stuck inside.

    - by ayaz
    I have a white MacBook, running Snow Leopard, 10.6.3 with the latest updates. I popped in a DVD that the system failed to mount. I did not see any conspicuous errors. As a result of this failure, the DVD got stuck in the drive. Neither pressing the eject button on the keyboard nor running the diskutil eject command caused the DVD to come out. The commands drutil eject and drutil tray open could not get the DVD to budge at all. The 'mount' and 'eject' buttons on the window for Disk Utility are dimmed out, while it is written in the middle for the DVD drive that that particular disc drive is busy. This is not the first time this has happened with me. I know that I will ultimately have to resort to rebooting the system and holding down the eject button to get the DVD to come out. But, is there any workaround that does not involve rebooting the system and prying the disc out? The drive on this MacBook does not have a needle-pin reset button -- at least, I couldn't find it anywhere. Any help will be greatly appreciated. Many thanks.

    Read the article

  • How to make Linux reliably boot on multi-cpu machines?

    - by Adam Tabi
    I've got two machines, one with 4x12 AMD Opteron cores (AMD Opteron(tm) Processor 6176), one with 2x8 Xeon cores (HT disabled; Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz). On both machines I experience difficulties during boot of Linux using recent kernels. The system hangs during the initialization of the kernel, before or just when initramfs started initializing the hardware. The last thing which got displayed was a stacktrace like this: CPU: 31 PID: 0 Comm: swapper/31 Tainted: G D 3.11.6-hardened #11 Hardware name: Supermicro X9DRT-HF+/X9DRT-HF+, BIOS 3.00 07/08/2013 task: ffff880854695500 ti: ffff880854695a28 task.ti: ffff880854695a28 RIP: 0010:[<ffffffff8100a82e>] [<ffffffff8100a82e>] default_idle+0x6/0xe RSP: 0000:ffff8808546b3ec8 EFLAGS: 00000286 RAX: ffffffff8100a828 RBX: ffff880854695a28 RCX: 00000000ffffffff RDX: 0100000000000000 RSI: 0000000000000000 RDI: ffff88107fdec690 RBP: ffff8808546b3ec8 R08: 0000000000000000 R09: ffff880854695500 R10: ffff880854695500 R11: 0000000000000001 R12: ffff880854695a28 R13: ffff880854695a28 R14: ffff880854695a28 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88107fde0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000002b43256a960 CR3: 00000000016b5000 CR4: 00000000000607f0 Stack: ffff8808546b3ed8 ffffffff8100aec9 ffff8808546b3f10 ffffffff8109ce25 334ab55852ec7aef 000000000000001f ffffffff8102d6c0 0000000000000000 0000000000000000 ffff8808546b3f48 ffffffff810276e0 ffff8808546b3f28 Call Trace: [<ffffffff8100aec9>] arch_cpu_idle+0x20/0x2b [<ffffffff8109ce25>] cpu_startup_entry+0xed/0x138 [<ffffffff8102d6c0>] ? flat_init_apic_ldr+0x80/0x80 [<ffffffff810276e0>] start_secondary+0x2c9/0x2f8 I compiled the kernel myself and it works fine, if I boot with nolapic. Yet, only one core is used. Also, the kernel of RHEL6 seems to work fine. I suspect that there are some patches used to make things work. Using the kernel config file from RHEL6 and building a more recent kernel yields the same problems. On the Xeon machine, things got better by disabling Hyperthreading completely. The machine now boots successfully on at least 4 out of 5 times. And if it boots, multicore stuff works just fine. However, I'm wondering about what to do about the AMD machine. So to sum it up: Gentoo kernel 3.6 - 3.11 won't reliably boot those machines unless you reduce the amount of cores (e.g. via nolapic). RHEL6 kernel (which is 2.6.32) boots just fine. RH kernel config used to build a 3.x kernel won't yield a working kernel. Not distribution specific (apart from the kernel being used). These stack traces got printed every minute or so. The kernel seems to be stuck in an endless loop. Yet, a recent kernel is needed for various reasons. So the question is: What does the RHEL6 kernel do, what vanilla or gentoo kernels don't do? Is there a boot option that might lead to a reliable boot with all the cores enabled? Best, Adam

    Read the article

  • Is it possible to "stealth" dual boot a machine?

    - by BrianH
    I have a loaner laptop that has MS Windows with locked down permissions. It works okay for what I need to do, but I started wondering if there was a way to install a separate Windows OS on a separate hard drive to do what I want to do on it. Virtual I wish I could use VirtualBox or VMWare, but that is not an option (I even tried VBox portable). External Drive My next trial was see if it was possible to install Windows on an external drive, and then plug that drive in and boot from it whenever I wanted my own OS. After a few Google searches, I see that is not really a possibility. Swap Primary Drive Another option, would be to get a second internal hard drive, take the existing HD out, and install a new Windows OS on the secondary HD. This would mean swapping the internal hard drive each time I want to switch OSs - doable, but not very convenient. Dual Boot The laptop has an expansion slot where a second hard drive can be plugged in quickly. I thought about Dual booting, but I don't want to mess with the MBR on the primary hard drive. When I have to give the laptop back, I don't want a dual-boot screen to popup. Summary Is there a way to have 2 hard-drives on a machine, each with it's own OS, and maybe use BIOS settings to have only 1 hard drive active at a time? That way both hard drives could be physically connected, but only one would actually be active at a time. I basically want a second OS that does not (can not) affect the existing OS in any way, and can be removed at any time without affecting the existing OS. The secondary OS does not need any of the files on the main hard drive - it's basically like having 2 separate computers using the same hard ware... Is this possible, or would it be easier just to go out and buy a different laptop? Thanks in advance! EDIT I just discovered that my BIOS allows me to pick (at startup) which hard drive I want to boot from. I poked around in the BIOS and there is not a place to disable certain devices, like the primary hard drive. My only concern about plugging in a second hard drive and installing Windows to the second hard drive is that it will mess with the primary hard drive, or add a bootloader screen to pick which windows install to use. My thought would be to physically unplug the primary, plug in the secondary and install windows to the secondary. After the install is working properly, I can plug the primary back in and use the BIOS feature to determine which drive to boot to. Is there any way after I have 2 separate installs on 2 separate hard drives that one of the installs could mess with the MBR on the other drive?

    Read the article

  • How to encrypt dual boot windows 7 and xp (bitlocker, truecrypt combo?) on sdd (recommended?)

    - by therobyouknow
    I would like to setup a dual boot Windows 7 and Windows XP laptop/notebook computer where each operation system's partition is fully encrypted. I would like to do this on a SSD - a 128Gb Crucial M4. My research Dual boot of truecrypt encrypted OSs on one drive (not possible - in Truecript 7.x at time of writing) This cannot be done on a standard Truecrypt setup - it will only support encrypting one of the operating systems. I have tried this and also read about it here on superuser.com However, I did see a solution here that uses grub4dos as the initial bootloader to chain to separate truecrypt encrypted OSs, in my case Windows 7 and Windows XP: http://yyzyyz.blogspot.co.uk/2010/06/truecrypt-how-to-encrypt-multiple.html I am not going to consider this solution as it relies upon some custom code for use in the bootloader that is provided by the author. I would prefer a solution that can be fully understood so that I can be sure that there is nothing undesirable occuring (i.e. malware or just simply bugs in the code). I would like to believe such a solution doesn't have those risks but I can't be sure. BitLocker and Truecrypt combination - possible solution? So I am now considering a combination of encryption programs: I now aim to encrypt Windows XP with Truecrypt and Windows 7 with BitLocker. Assuming Truecrypt bootloader can boot into non-Truecrypt OSs (e.g. via hitting Escape to go to another menu), then this solution may be viable. SSDs and Encryption (use fastest possible spinning hard disk instead (?)) I read on various superuser.com posts and elsewhere that current SSDs are not suited to whole drive encryption for various reasons: impact of performance algorithms that give SSDs advantage over spinning harddisks. Algorithms used in compression of data for example. Wear on the SSD, shortening its life Security issues whereby data is repeated, as indicated in some Truecrypt documentation So I am now considering not using SSD. But with the aim to have the fastest drive possible, I am considering using the Western Digital Scorpion black 2.5" 7200rpm harddisk as this appears to be top rated among spinning platter-based harddrives (don't work for Western Digital). Summary So to achieve whole drive encrypted dual boot Windows 7 and Windows XP with minimal performance impact I intend to use a combination of Truecrypt and Bitlocker on a top-rated conventional spinning platter-based harddisk. Questions Will my summary: achieve whole disk encryption of the dual-boot Windows XP, Windows 7? OR an you suggest a simpler solution, including one that only requires only Truecrypt (BitLocker not available on XP). Or another encryption tool, including paid-for? provide the highest performance. Am I correct to avoid using SDD with encryption for the reasons I discovered? Are the concerns about SSDs and encryption still very real (some articles I read go back to 2010) Thanks for your input!

    Read the article

  • HTG Explains: How Windows 8's Secure Boot Feature Works & What It Means for Linux

    - by Chris Hoffman
    Whether you plan on using Windows 8 or not, everyone buying a PC in the future will end up with the Microsoft-driven Secure Boot feature enabled. Secure Boot prevents “unauthorized” operating systems and software from loading during the startup process. Secure Boot is a feature enabled by UEFI – which replaces the traditional PC BIOS – but Microsoft mandates specific implementations for x86 (Intel) and ARM PCs. Any computer with a Windows 8 logo sticker has Secure Boot enabled. Image Credit: Kiwi Flickr HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux Hack Your Kindle for Easy Font Customization HTG Explains: What Is RSS and How Can I Benefit From Using It?

    Read the article

  • Installing Ubuntu 12.04 on NUC intel i3 DC3217IYE

    - by Kieron
    System: NUC i3, 2 hdmi ports, ethernet, no wireless. UEFI boot 2x2gb ram 30gb mSATA internal drive Ubuntu 64bit 12.04.03 Hello i am having much trouble loading an OS on my NUC. I started out attempting another OS with various loaders (beast/hack) without much success,(various panics on boot or endless reboot loops, or graphics failures) after many tries i decided to attempt Ubuntu. Many years ago i loaded Ubuntu on an e-machine without an issue so i figured it would go smoothly, nothing could be further from the truth. The Live USB stick loads, but when i am installing the OS it always fails to load grub 2. Obviously it wont boot from SSD without grub2. I searched and found that Boot-repair should fix it...so i created a live usb with boot repair...it refuses to repair the grub because the install never finished and the needed partions are not fully created and flagged. It also demands an internet connection which i am unable to provide. I then ran gparted in an attempt to create the needed partitions manually, then re-ran boot repair turning off the "check internet" option. and disabling the re-install grub hoping it would create the missing directories and or fix the flags. it appeared to run successfully but upon return to the Ubuntu live USB it still fails at the grub2 install. also gparted doesnt have the same choices that Ubuntu install has when creating partitions, causing it to not recognize that i already had a root, or an EFI directory or it sometimes couldnt tell what the format of the partition was...all very annoying the reason i cant connect to internet (and cant upload the error logs) is the nuc only has Ethernet and the location i have to set up is too far away from modem. i can not move the monitor closer to modem as it is a 50inch LCD. I just want to do a basic install with one user acct and remote desktop (vnc) turned on so i can move the NUC to the modem connect via ethernet and then finish setting it up via Remote desktop/VNC chicken from my mac. While i await any assistance you maybe able to provide i am going to attempt to switch to the 32bit version and legacy boot to see if that can load grub. thnx again to anyone that can come up with a possible solution. i would love to hit "erase and install ubuntu" if anyone can figure out what is stopping that simple answer from working. Also disks (CD/DVD) are not an option as neither my Mac mini or my NUC have optical drives, and i have no desire to buy one for one task

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >