Search Results

Search found 25660 results on 1027 pages for 'booting issue'.

Page 52/1027 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • Windows XP Boot Issue - Diagnosing A Hard Drive Failure

    - by duffymo
    My five-year-old HP desktop running Windows XP SP3 wouldn't boot from the hard drive yesterday afternoon. I would see the boot sequence begin, then nothing but a black screen. Fortunately, I had just done an Acronis backup to my external drive in the morning, and I have a bootable USB key. I put the USB key into the drive, powered up the machine, and put the USB key first in line in the boot sequence. Voila! My machine came alive. But now I'm confused as to what the problem is and what to do next. I assumed that my hard drive was toast. But now that the machine is alive I can see files on my C: drive that have changes I made just yesterday. Clearly the drive is not dead. Here are my questions: What could explain my inability to boot from the hard drive? What would a remedy be? What's my best course of action? Should I replace the hard drive with a new one? If I replace the hard drive, do I reinstall the OS and apply the backup I did yesterday? If I decide that re-installing Windows XP makes no sense, how do I get back the Acronis backup that I did yesterday? I don't want to lose that. UPDATE: I just learned one more key fact. I'm having some work done on my house. I neglected to shut my machine down before the contractor came. My wife said he shut down the power to do some work on a circuit and then powered the house back up. I have a surge protector, but is it possible that cycling the power did some damage?

    Read the article

  • Security issue on Linux with Netbeans

    - by WebDevHobo
    In order to edit some files in Netbeans, I had to do a chmod 777 on the parent-folder. Reason being that anything else would result in Netbeans not wanting to accept the folder, as it could not be written. Is there an other way to do this besides doing a chmod 777? I'm on Ubuntu 9.10, using Netbeans 6.7.1 And after that, I manually have to give each file the needed rights. There should be an easier way, I just don't know it. EDIT: I am running XAMPP and the files I'm trying to edit are in the htdocs folder. I'm running Netbeans as my local user account, which is how it starts if I have it run from the applications-menu.

    Read the article

  • DV-AVI in DivX Plus Player and VirtualDub - playback issue

    - by user714965
    I have an AVI-video which I had (digitally) transferred from a DV camera to my PC. The video contains errors at the beginning most likely because the DV tape was pretty old. When playing this video in the DivX Plus Player I get some picture artefacts and some high noise peaks of the sound. These stops after two seconds. When I'm playing this video in VirtualDub (where I want to cut it) I get the same picture artefacts. But the sound errors (those loud high peaks) lasts ten seconds. These sound errors are also contained in the cutted video. Why does the video have more errors when played in VirtualDub? I think because of different codecs which are used for decoding the video? How can I change the codec which VirtualDub uses for decoding? I have installed ffdshow for this but it seems that it is not used because I don't get the ffdshow icon in the taskbar when playing the video in VirtualDub. When playing in DivX Player Plus I get this icon.

    Read the article

  • Windows 7 Printing Issue

    - by Adrian Godong
    I am using Windows 7 RTM x64. From Control Panel Devices and Printers, I have three printers listed; Fax, XPS Writer, and a Lexmark. I can print a test page through the printer properties with no problem. I can print a text file from Notepad with no problem. I can't print from Safari. When I press Ctrl+P, it displays the Print dialog, press OK and nothing happened. I can't print from Adobe Reader. When I press Ctrl+P, it complains that it there is no printer installed. I can't print from Office applications. When I press Ctrl+P, it crashes immediately. Running Office Diagnostics does not help. I can't print from IE8. When I press Ctrl+P, it displays the Print dialog, complains that I have to select a printer from the list, selected any of the three printers, the Print button is disabled. Any help? Update (01/11/2009): The default printer is the Lexmark. I'm testing on this one as well. I was about to reinstall Office (as this is the first application that has the problem), but then I tried other, some behave similarly but not identical (maybe caused by different printing implementation). On those applications that is able to display printer selection dialog, I tried the Lexmark and XPS. Neither printed anything (paper for Lexmark, file for XPS). Update (01/12/2009): It seems that my Windows installation is botched. A colleague have similar hardware/software combination (it's the same workstation model and Windows 7 x64) and his can print perfectly fine. I tried adding the printer from his share, no joy. I can test print from the printer property, I can print from Notepad, but not from any other application.

    Read the article

  • Help debugging Sendmail/Mailman configuration issue

    - by inxilpro
    Hi folks, I'm trying to configure a server with Sendmail and Mailman. I've been getting "Broken pipe" errors for a while, and have slowly been debugging. I fixed some permission issues, and changed the user that Mailman expects to be called from, among other things. Finally, I'd gone through everything I could think of, so I added a new test to see if it's the Mailman script or Sendmail that's causing the problem. Here's the error I'm getting now (stripped of timestamps and identifying information): <-- MAIL FROM:[email protected] Authentication-Warning: xxxxx.org: xxxxxxxxxxxxxx.net [xx.xx.xxx.xxx] didn't use HELO protocol --- 250 2.1.0 [email protected]... Sender ok <-- RCPT TO: [email protected] --- 250 2.1.5 [email protected]... Recipient ok <-- DATA --- 354 Enter mail, end with "." on a line by itself [email protected], size=20, class=0, nrcpts=1, msgid=<[email protected]>, proto=SMTP, relay=xxxxxxxxxxxxxx.net [xx.xx.xxx.xxx] --- 250 2.0.0 o6KMg2xZ025804 Message accepted for delivery alias [email protected] => "|/bin/echo foo" SYSERR(root): putbody: write error: Broken pipe 0: fl=0x0, mode=20660: CHR: dev=0/15, ino=776, nlink=1, u/gid=0/0, size=0 1: fl=0x1, mode=20660: CHR: dev=0/15, ino=776, nlink=1, u/gid=0/0, size=0 2: fl=0x1, mode=20660: CHR: dev=0/15, ino=776, nlink=1, u/gid=0/0, size=0 3: fl=0x2, mode=140777: SOCK localhost->[[UNIX: /dev/log]] 5: fl=0x0, mode=100600: dev=8/3, ino=486765, nlink=1, u/gid=0/51, size=5 6: fl=0x8000, mode=100640: dev=8/3, ino=65501, nlink=1, u/gid=0/0, size=12288 7: fl=0x8000, mode=100640: dev=8/3, ino=65501, nlink=1, u/gid=0/0, size=12288 8: fl=0x8000, mode=100640: dev=8/3, ino=65510, nlink=1, u/gid=0/0, size=12288 9: fl=0x8000, mode=100640: dev=8/3, ino=65510, nlink=1, u/gid=0/0, size=12288 10: fl=0x8000, mode=100640: dev=8/3, ino=64814, nlink=1, u/gid=0/51, size=12288 11: fl=0x8000, mode=100640: dev=8/3, ino=64814, nlink=1, u/gid=0/51, size=12288 12: fl=0x1, mode=100600: dev=8/3, ino=486767, nlink=1, u/gid=0/51, size=754 13: fl=0x1, mode=10600: FIFO: dev=0/5, ino=7649785, nlink=1, u/gid=0/51, size=0 14: fl=0x0, mode=10600: FIFO: dev=0/5, ino=7649786, nlink=1, u/gid=0/51, size=0 MCI@0x0: NULL MCI@0x0: NULL to="|/bin/echo foo", [email protected] (8/0), delay=00:00:08, xdelay=00:00:00, mailer=prog, pri=30476, dsn=5.0.0, stat=Service unavailable o6KMsnxX025948: DSN: Service unavailable done; delay=00:00:08, ntries=1 The alias in /etc/aliases is: cmtest: "|/bin/echo foo" As you can see, even when trying to pipe to /bin/echo I still get the same error. But I can't for the life of me figure out what else to check. Normal aliases work fine. Any ideas? Thanks!

    Read the article

  • SharePoint Search Center issue

    - by George2
    Hello everyone, I am using SharePoint Server 2007 with collaboration portal template on Windows Server 2008. The default search address for a site is pointed to /SearchCenter/Pages/Results.aspx. Any ideas how to change the address to some other address? thanks in advance, George

    Read the article

  • Weird Windows 2003 MSDTC and SQL 2005 issue

    - by seagull surfer
    scenario: Windows 2003 sp2 x64 enterprise edition. SQL 2005 sp2 cu9 x64 Enterprise edition After restarting the resource groups on two node active-active cluster, 3 SQL 2005 instances start up fine. The 4th one starts up but starts throwing the following error. "Enlist operation failed: 0x8004d00e(XACT E NOTRANSACTION). SQL Server could not register with Microsoft Distributed Transaction Coordinator (MS DTC) as a resource manager for this transaction. The transaction may have been stopped by the client or the resource manager." MSDTC is fine since the other 3 function normally. The only way to "fix" it is to take the 4th instance offline and bring it online again. Is there any way to fix this enlistment without restarting?

    Read the article

  • Permission issue for apache

    - by Aamir Adnan
    Environment Details: Amazon Ec2 Ubuntu 12.04 Django + mod_wsgi + python 2.6 web server: apache2 I have mounted a 10GB ebs volume to an instance to /mnt/ebs1/. After mounting the volume and formatting, I have placed all my project files in /mnt/ebs1/project. the wsgi file is in /mnt/ebs1/project/apache/django.wsgi. The content of wsgi file is: import os, sys sys.path.insert(0, '/mnt/ebs1/project') sys.path.insert(1, '/mnt/ebs1') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.configs.common.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() My httpd.conf file looks as: LoadModule wsgi_module /usr/lib/apache2/modules/mod_wsgi.so WSGIPythonHome /usr/bin/python2.6 WSGIScriptAlias / /mnt/ebs1/project/apache/django.wsgi <Directory /mnt/ebs1/project> Order allow,deny Allow from all </Directory> <Directory /mnt/ebs1/project/apache> Order allow,deny Allow from all </Directory> Alias /static/ /mnt/ebs1/project/static/ <Directory /mnt/ebs1/project/static> Order deny,allow Allow from all </Directory> The above configurations gives me Forbidden: You don't have permission to access / on this server. I tried to find the user which is running apache using ps aux which is www-data and has group www-data. I have tried to change the ownership of /mnt/ebs1 and its subdirectories using chown -R www-data:www-data /mnt/ebs1 but that still does not solve the problem. Can any one tell me what I am doing wrong or have missed?

    Read the article

  • SSL issue with emails

    - by JackWillDavis
    OK, so I have somebody hosting a site on my CentOS 5.8 Plesk 11 control panel. He has a EV SSL which is validating the site fine however he has failed the PCI check because it is saying his email servers (SMTP, IPAM, POP) have the wrong name on the servers. This is because his SSL certificate is not a wildcard certificate and the email servers are flagging the default Plesk SSL certificate. Is there a way to stop Plesk automatically connecting emails via the default SSL? I'm fairly new to things like this so I hope I've written everything I need, let me know if any more details are needed. Jack

    Read the article

  • FastGate A20 Line And Himem.sys Issue With Updating BIOS

    - by Boris_yo
    I have been persistent with a thought to perform my first BIOS update ever through MS-DOS but have been postponing this task until today. Despite people telling me any bootable ISO will do it either through CD-ROM or RAMDRIVE, I am still having problems. First is the problem with CD-ROM driver trying to make it work with 4 driver files (cd1.SYS, cd2.SYS, cd3.SYS, cd4.SYS) as well as starting RAMDISK proved to be failure: CD-ROM XMS Allocation Error RAMDISK XMS Allocaton Error (X: and R: drives not working) This A20 line seemed to be the obstacle which then after a couple of searches pointed me to this article on Microsoft website. It seems that FastGate is the culprit which takes over A20 line and conflicts with himem.sys which should be handling it causing the driver to be unable to allocate memory resources. Albeit article suggests 2 workarounds which is disabling FastGate option or adding switch, I read that the former workaround could cause problems which involves later tinkering BIOS, disabling shadow copy etc. while the latter workaround can just hang system as stated in the link above. I assume it just hangs the boot process from image file though. Summing up the above, I am cautious and think it is risky to follow both workarounds because disabling FastGate or trying adding switch by trying available switches from 1-14 or 16, could crash the BIOS update process by itself. I could do this without the need for himem.sys with bootable USB thumbdrive by making it to be seen as USB-HDD, but some time ago I read that it is never a good idea to update BIOS from hard drive so even thought it is simulation, who knows... Maybe it will deactivate hard drive in the middle of the BIOS update process or even USB thumbdrive per se? One forum discussion was about updating BIOS and somebody suggested to not load himem.sys for some reason, but now that I think of it, what if BIOS update needs upper memory?

    Read the article

  • Windows 7-File Copy Issue

    - by Manoj M
    I am using Windows 7 and my application server is Windows Xp. When I copy files from my local to server,it takes long time. Is there any solution for solving this ? When I copy files from Xp to Xp, it is fast. I found a soln in .net http://www.windowsreference.com/windows-7/slow-network-file-copy-issues-in-windows-7-caused-by-remote-differential-compression/ I tried it ,but no change

    Read the article

  • 301 redirect from non www to www issue

    - by esmitex
    I have been trying to set a 301 redirect from a non www to a www domain since yesterday but it only cause problems on my site. I first tried it from the control panel of the website, then by modifying the .htaccess file with the following: Options +FollowSymlinks RewriteEngine on rewritecond %{http_host} ^mydomain.com [nc] rewriterule ^(.*)$ http://www.mydomain.com/$1 [r=301,nc] My site is based on wordpress, the first problem that occurred was that I could not access my backend anymore… when I was trying to log in the page would just reload itself and then there was an endless loop and the whole site was unaccessible. After removing these few lines, everything was fine.

    Read the article

  • environment variable issue in shell

    - by George2
    I am using Red Hat Linux Enterprise 5. I know the theory that -- using export to set environment variable, the environment variable will apply to current and child environment, but without using export to set environment variable, the environment variable will only apply to the current environment. My confusion is, what is the exact definition of "child environment" and "current environment"? For example, $ var1=123 $ echo "Hello [$var1]" the value of var1 (which is 123) is printed in shell, but I think echo is a command invoked by current shell, and it (the echo command) should be a child environment of current shell and the value of var1 should not (because not using export var1=123) impact echo. Any comments? Thanks in advance!

    Read the article

  • delete file issue for Mac

    - by George2
    I am using a MacBook Pro running Mac OS X 10.5. I am new to this development environment, and previously worked on Windows. I have tried when select a file (e.g. a ppt file on desktop), then I press Delete key on keyboard. The file is not deleted (seems no effect). How to delete a file from keyboard? Thanks in advance.

    Read the article

  • IPSec Tunnel to Amazon EC2 - Netkey, NAT, and routing issue

    - by Ernest Mueller
    I'm working on getting an IPSec VPN working between Amazon EC2 and my on-premise. The goal is to be able to safely administer stuff, up/download data, etc. over that tunnel. I have gotten the tunnel up in openswan between a Fedora 12 instance with an elastic IP and a Cisco router that's also NATted. I think the ipsec part is OK, but I'm having trouble figuring out how to route traffic that way; there's no "ipsec0" virutal interface because on Amazon you have to use netkey and not KLIPS for the vpn. I hear iptables may be required and I'm an iptables noob. On the left (Amazon), I have a 10. network. Box 1 is privately 10.254.110.A, publically IP 184.73.168.B. Netkey tunnel is up. Box 2 is publically 130.164.26.C, privately 130.164.0.D And my .conf is: conn ni type= tunnel authby= secret left= 10.254.110.A leftid= 184.73.168.B leftnexthop= %defaultroute leftsubnet= 10.254.0.0/32 right= 130.164.26.C rightid= 130.164.0.D rightnexthop= %defaultroute rightsubnet= 130.164.0.0/18 keyexchange= ike pfs= no auto= start keyingtries= 3 disablearrivalcheck=no ikelifetime= 240m auth= esp compress= no keylife= 60m forceencaps= yes esp= 3des-md5 I added a route to box 1 (130.164.0.0/18 via 10.254.110.A dev eth0) but that doesn't do it for predictable reasons, when I traceroute the traffic's still going "around" and not through the vpn. Routing table: 10.254.110.0/23 dev eth0 proto kernel scope link src 10.254.110.A 130.164.0.0/18 via 10.254.110.178 dev eth0 src 10.254.110.A 169.254.0.0/16 dev eth0 scope link metric 1002 Anyone know how to do the routing with a netkey ipsec tunnel where both sides are NATted? Thanks...

    Read the article

  • Outlook 2007 to 2010 upgrade - Invisible folders issue

    - by Mahesh
    I upgraded my outlook 2007 to 2010. Everything was smooth, but realised later that, some of the archeive folders are missing. But, When I did a search on my archeive for a mail(exists in missing folder), it is able to show the mail in the search results. It is also showing the missing folder name in the search results. Please let me know why this is happening and a possible resolution. Thanks a lot. Mahesh

    Read the article

  • Comcast SMC Port Forwarding Issue

    - by Zach Fedora
    I have a Comcast SMCD3G modem/router and I've been having issues getting the port to forward - When I check an online "open-port-checker" it says the port is forwarded/they can see the port on my IP. (1 Static IP is assigned to the modem) But when I try to access port 80 for example on a browser, it times out. Also when I try to remote desktop to the server (Windows Server 2008 R2) it doesn't work, yet canyouseeme.org says it is open. Any ideas as to what the problem could be?

    Read the article

  • Dependency issue when installing some packages with apt

    - by Julien Genestoux
    We have a little trouble installing some php5-* packages. I am reallt not sure what is going on. We have the latest version of php5-common. # apt-get install php5-mcrypt Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: php5-mcrypt: Depends: php5-common (= 5.2.6.dfsg.1-1+lenny16) but 5.2.11-0.dotdeb.0 is to be installed E: Broken packages We get similar error with many other php5-* packages, like php5-imap.

    Read the article

  • File permissions issue with an NFSv4 share, uploaded from a Mac Lion

    - by POP.sicle
    I have an NFSv4 share that was working fine, with Macs using Snow Leopard, to share files across the network. The NFS share has one cloned user/group that all clients autoconnect as. However, when I use a Lion Mac to copy a file from their user directory to the NFS, no other computer (mac SL/mac Lion/Win7) can edit/delete/write to the file that was uploaded - despite having the correct read/write/ex permissions visible on the NFS and through terminal. Attempting to edit the file permissions through Finder completely locks the file. I suspect this has something to do with Lion's ACLs (or maybe its version control) conflicting with NFSv4. Is there a way to disable or ignore extended ACLs or extended file permissions on the NFSv4 side, that would allow users to not run into this conflict? The work around currently is to use NFS Manager and set automounts to ignore ownership but installing NFS manager and configuring automounts for all of the computers seems more troubling than attempting to reconfigure the NFS settings. Advice?

    Read the article

  • pdftk issue after updating Ubuntu from 9.04 to 9.10

    - by Crazydog
    We upgraded our server to 9.10 from 9.04 the other day, and it all went well except for one rather important program. We're using pdftk to automatically generate filled out pdf forms. On 9.04, it worked just fine. After updating to 9.10, the pdf forms would no longer be filled out - they'd just be empty. I discovered that if I try to create an fdf file via pdftk from my PDF form, it just creates an empty fdf with no fields. On windows, pdftk generates the fdf file just fine. Any ideas? Thanks.

    Read the article

  • Openvpn issue with linux

    - by catsy
    So I've tried to setup openvpn, I followed some guide but it's stuck att "initialization sequence completed" with no connection and I can't find any working solution... here's the log: $Sun Sep 23 19:14:32 2012 OpenVPN 2.1.0 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 20 2010 Enter Auth Username:pumpedup Enter Auth Password: Sun Sep 23 19:14:37 2012 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info. Sun Sep 23 19:14:37 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sun Sep 23 19:14:37 2012 LZO compression initialized Sun Sep 23 19:14:37 2012 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Sun Sep 23 19:14:38 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Sun Sep 23 19:14:38 2012 Local Options hash (VER=V4): '41690919' Sun Sep 23 19:14:38 2012 Expected Remote Options hash (VER=V4): '530fdded' Sun Sep 23 19:14:38 2012 Socket Buffers: R=[163840-131072] S=[163840-131072] Sun Sep 23 19:14:38 2012 UDPv4 link local: [undef] Sun Sep 23 19:14:38 2012 UDPv4 link remote: [AF_INET]192.162.102.162:1194 Sun Sep 23 19:14:38 2012 TLS: Initial packet from [AF_INET]192.162.102.162:1194, sid=87a95723 a6d7b7f9 Sun Sep 23 19:14:38 2012 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Sun Sep 23 19:14:38 2012 VERIFY OK: depth=1, /C=NV/ST=NV/L=nVPN/O=nVpn/CN=nVpn_CA/[email protected] Sun Sep 23 19:14:38 2012 VERIFY OK: depth=0, /C=NV/ST=NV/L=nVPN/O=nVpn/CN=server/[email protected] Sun Sep 23 19:14:39 2012 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1542', remote='link-mtu 6042' Sun Sep 23 19:14:39 2012 WARNING: 'tun-mtu' is used inconsistently, local='tun-mtu 1500', remote='tun-mtu 6000' Sun Sep 23 19:14:39 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Sun Sep 23 19:14:39 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sun Sep 23 19:14:39 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Sun Sep 23 19:14:39 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sun Sep 23 19:14:39 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Sun Sep 23 19:14:39 2012 [server] Peer Connection Initiated with [AF_INET]192.162.102.162:1194 Sun Sep 23 19:14:41 2012 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Sun Sep 23 19:14:41 2012 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.8.8,route 10.102.162.1,topology net30,ping 10,ping-restart 120,ifconfig 10.102.162.6 10.102.162.5' Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: timers and/or timeouts modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: --ifconfig/up options modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: route options modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Sun Sep 23 19:14:41 2012 ROUTE default_gateway=10.0.2.2 Sun Sep 23 19:14:41 2012 TUN/TAP device tun0 opened Sun Sep 23 19:14:41 2012 TUN/TAP TX queue length set to 100 Sun Sep 23 19:14:41 2012 /sbin/ifconfig tun0 10.102.162.6 pointopoint 10.102.162.5 mtu 1500 Sun Sep 23 19:14:41 2012 /sbin/route add -net 192.162.102.162 netmask 255.255.255.255 gw 10.0.2.2 Sun Sep 23 19:14:41 2012 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 /sbin/route add -net 10.102.162.1 netmask 255.255.255.255 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 Initialization Sequence Completed

    Read the article

  • Apache virtual server httpd-vhosts undocumented issue

    - by Ethon Bridges
    I have read the Apache documentation on the https-vhosts.conf file and after a couple of hours fighting this problem, figured it out on my own. Here's the situation: We have a domain that ends in a .ws Apparently you can't do this in the conf file. You MUST use the ? wildcard or it will not work. The * wildcard will not work either. Further, in the ServerAlias directive, anything past the first entry will not work if the first entry in the ServerAlias directive is not correct. Here is an example of an entry that does NOT work. Note that anotherdomain.com and yetanotherdomain.com will fail because thedomain.ws is not configured correctly: <VirtualHost *:80> DocumentRoot /opt/local/apache2/sites/ourdomain ServerName www.thedomain.ws ServerAlias thedomain.ws another domain.com yetanotherdomain.com <Directory /opt/local/apache2/sites/ourdomain> allow from all </Directory> </VirtualHost> Here is an example of our working entry: <VirtualHost *:80> DocumentRoot /opt/local/apache2/sites/ourdomain ServerName www.thedomain.ws? ServerAlias thedomain.ws? another domain.com yetanotherdomain.com <Directory /opt/local/apache2/sites/ourdomain> allow from all </Directory> </VirtualHost> If there is documentation of this, I sure didn't see it.

    Read the article

  • Corosync :: Restarting some resources after Lan connectivity issue

    - by moebius_eye
    I am currently looking into corosync to build a two-node cluster. So, I've got it working fine, and it does what I want to do, which is: Lost connectivity between the two nodes gives the first node '10node' both Failover Wan IPs. (aka resources WanCluster100 and WanCluster101 ) '11node' does nothing. He "thinks" he still has his Failover Wan IP. (aka WanCluster101) But it doesn't do this: '11node' should restart the WanCluster101 resource when the connectivity with the other node is back. This is to prevent a condition where node10 simply dies (and thus does not get 11node's Failover Wan IP), resulting in a situation where none of the nodes have 10node's failover IP because 10node is down 11node has "given back" his failover Wan IP. Here's the current configuration I'm working on. node 10sch \ attributes standby="off" node 11sch \ attributes standby="off" primitive LanCluster100 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.100" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive LanCluster101 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.101" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive Ping100 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive Ping101 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive WanCluster100 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.100" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive WanCluster101 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.101" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive Website0 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf" options="-DSSL" \ operations $id="Website-one" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" primitive Website1 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf.1" options="-DSSL" \ operations $id="Website-two" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" group All100 WanCluster100 LanCluster100 group All101 WanCluster101 LanCluster101 location AlwaysPing100WithNode10 Ping100 \ rule $id="AlWaysPing100WithNode10-rule" inf: #uname eq 10sch location AlwaysPing101WithNode11 Ping101 \ rule $id="AlWaysPing101WithNode11-rule" inf: #uname eq 11sch location NeverLan100WithNode11 LanCluster100 \ rule $id="RAND1083308" -inf: #uname eq 11sch location NeverPing100WithNode11 Ping100 \ rule $id="NeverPing100WithNode11-rule" -inf: #uname eq 11sch location NeverPing101WithNode10 Ping101 \ rule $id="NeverPing101WithNode10-rule" -inf: #uname eq 10sch location Website0NeedsConnectivity Website0 \ rule $id="Website0NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 location Website1NeedsConnectivity Website1 \ rule $id="Website1NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 colocation Never -inf: LanCluster101 LanCluster100 colocation Never2 -inf: WanCluster100 LanCluster101 colocation NeverBothWebsitesTogether -inf: Website0 Website1 property $id="cib-bootstrap-options" \ dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1408954702" \ maintenance-mode="false" rsc_defaults $id="rsc-options" \ resource-stickiness="100" \ migration-threshold="3" I also have a less important question concerning this line: colocation NeverBothLans -inf: LanCluster101 LanCluster100 How do I tell it that this collocation only applies to '11node'.

    Read the article

  • Dell E6400 Display issue - "doubling up" intermittently

    - by alex
    I've got a Dell E6400 It's suddenly developed an intermittent fault with the display Every now and again, it seems to boot up with "double vision" By that I mean, its split horizontally, with each half showing the same thing, but with low resolution, and looks grainy - if that makes sense (I will try to get a couple of pictures if I can) I haven't changed any hardware or anything. I have re-built windows, to see if that fixed the problem, it didn't. I've upgraded the BIOS to see if that would help, still same problem. I'm out of ideas :-(

    Read the article

  • Sharepoint database connection issue after upgrade to SQL Server 2008 R2

    - by Neil Hoff
    I took a backup of all our Sharepoint WSS 3.0 databases and restored them to a new Windows 2008 R2 server. The new SQL server has the same name and IP address as the old one. The only difference between the two is the new one has SQL 2008 R2 and the old one has SQL 2005. When I navigate to the sharepoint url I get this error: Cannot connect to the configuration database. I checked the logs at this location: "%commonprogramfiles%/Microsoft Shared/web server extensions/12/Logs" and found this error: System.Data.SqlClient.SqlException: Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. Any ideas?

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >