Search Results

Search found 2602 results on 105 pages for 'dell poweredge'.

Page 52/105 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • How do I lower the hardware volume? (volume too high)

    - by Zom-B
    I have a 4yo Dell laptop with Windows XP Pro (modern ones unfortunately don't have a physical volume knob), and lately I'm using my Apple earphones, because they have much better low frequency response than my $10 earphones. They also have the side effect of being much louder. To give an indication of my agony, for most tasks (movie, music, games) I have my main volume at 3 ticks: drag to 0 with the mouse and press the up key 3 times (the handle does not even raise 1 pixel) and my wave volume at 50%. I notice that when I do this, I have a lot of digital noise, because I'm using just a tiny fraction of the 16-bit space. If I drag the Wave slider down until I barely hear the audio, it becomes really distorted and noisy, indicating that this is digital volume (in the DirectSound driver or something) and not hardware volume. I experimented in Audition. When I make a tone of 1000Hz at -50db, (all windows volumes at max) the volume is just below my pain threshold. When I zoom in to see how high the sample values reach, I see that just 8 of the 16 bits are used (about -100 ~ 100). When I generate such tone at -80db (minimum I can specify) then I can still clearly hear the tone, although really noisy. When I zoom in, I see that just 3 out of 16 bits are used. I created a squarewave tone that is just 1 bit high, and I can still hear it! For most uses, this is not a big problem (audiophiles will disagree!), as I just have more noise than usual (about the same as old 8 bit hardware), but I'm also in the process of programming a hearing test program, in which case this problem is a death blow as the test subjects will even hear tones at the bottom of the theoretical range (lowering the windows volume is futile, see above) (I cannot update drivers, as Dell has discontinued XP support for my model)

    Read the article

  • no administrator password for Windows 7

    - by huskergirl78
    I'm a secretary and my boss set up my new Windows 7 OptiPlex 7010 (Dell) computer for me while I was on vacation (he does not remember setting any "administrator" password). We are a small office so there is no system password set, either. I've used it for 6 months, all the while I couldn't access network drives, etc., without an administrator password. It was annoying, but I could still get my work done. Finally, on a slow day I took it upon myself to "fix" the problem, and in all my infinite wisdom, I managed to change my user account from administrator to standard user, so now I really can't do anything. I can't download or install any programs, move or rename files, etc. I tried the Dell suggested solution, but the BIOS tells me there is no password set, so it has to be a Windows 7 problem. All the solutions I have come across require an administrator password to let me do them. What can I do to find out the admin password so I can use my own darn computer!? Is there a default admin password?

    Read the article

  • xrandr fails when 3rd monitor has higher resolution

    - by Pi3cH
    I tried many combinations with xrandr command under lubuntu 12.04 to setup my three monitors DVI (DELL 1) left detected as HDMI1 HDMI (LG E2290) middle detected as HDMI2 VGA (DELL 2) right detected as VGA1 I can get the display with fix 1280x1024 on all the monitors. But once I setup 1280x1024 + 1920x1080 + 1280x1024, I get blank screen on all the monitors. Sometimes it throws crts fail error instead of blanking out. Anyone have similar issues? any solutions/workarounds? P.S. I can setup two monitors using 1280x1280 and 1920x1080 P.S.S. HDMI2 required at least 1920x1080 to display sharp picture. Outputs (it seems graphic card supports up to 8192x8192): xrandr Screen 0: minimum 320 x 200, current 3840 x 1024, maximum 8192 x 8192 VGA1 connected 1280x1024+2560+0 (normal left inverted right x axis y axis) 338mm x 270mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI2 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0 + 1680x1050 60.0 1280x1024 75.0 60.0* 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) 3 CRTs (0,1 VGA, 0,1,2 for other HDMI) xrandr --verbose VGA1 connected 1280x1024+2560+0 (0x47) normal (normal left inverted right x axis y axis) 338mm x 270mm Identifier: 0x42 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 0 CRTCs: 0 1 ... HDMI1 connected 1280x1024+0+0 (0x47) normal (normal left inverted right x axis y axis) 376mm x 301mm Identifier: 0x43 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 1 CRTCs: 0 1 2 ... HDMI2 connected 1280x1024+1280+0 (0x47) normal (normal left inverted right x axis y axis) 477mm x 268mm Identifier: 0x44 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 2 CRTCs: 0 1 2 Below command fails: xrandr --output VGA1 --auto --output HDMI2 --auto --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Below command passes: xrandr --output VGA1 --auto --output HDMI2 --mode 1280x1024 --rate 60.0 --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Graphic card VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09)

    Read the article

  • Why am I missing 4GB of RAM on Windows Server 2008 R2 64bit?

    - by Nick G
    I noticed today that a server was very low on memory. It physically has 8GB installed and runs Windows 2008 R2 Standard 64bit. It also hosts 2 virtual machines using HyperV. Server is Dell Poweredge R510. However the host OS reports in task manager that it only has 4GB of RAM, despite actually having 8GB and it being a 64bit OS. Computer properties shows Installed memory: 8.00GB (3.99GB usuable). Why would "usable" be half the real RAM installed under a 64bit OS? Additionally nearly all of the 4GB of visible RAM on the host OS is being used by something without anything showing up in task manager (presumably HyperV as it's allocated 3.6GB to the virtual machines its hosting). However that doesn't explain where the other 4GB has gone which Windows can't even see. Where is my missing 4GB of RAM? Update: Dell OpenManage says this: Total Installed Capacity 8192 MB Total Installed Capacity Available to the OS 4096 MB So looks like Nathan's suggestion of memory mirroring might be correct. I'll have to reboot to check this (I think?) Update 2 OK. So I reboot and I get a message saying "the amount of system memory has changed" (despite not having touched the hardware in a year). Once Windows has booted, all 8GB is visible again. Looks like I probably have a hardware RAM issue (I'll perhaps try reseating it whenever I can chuck everyone off the server next). Thanks for your answers and comments. I was hoping it was going to be the mirrored-RAM option but it seems not - that's not even mentioned in the BIOS.

    Read the article

  • After RAID failure SBS 2008 issues logging in and Exchange store does not mount

    - by Josh R
    today has been one of those days. Yesterday a hard drive in our Dell Poweredge 2900 server failed and the RAID array didn't degrade gracefully, so I called Dell (Server still under warranty) and got an engineer to work though the RAID issues with me. He was a nice guy but didn't do too much. We tried to put the RAID in a state where it was bootable and even though we only lost one disk there are still issues with the server. Once we got the server to boot there was an error message saying that the logonui.exe was corrupted and we needed to run chkdsk. I clicked through the error messages and the login screen never came up. So I power cycled the server and it chkdsk automatically but the login screen didn't appear. I tried safe mode, no difference there either. So the issues I am currently having are: 1) The server boots up, the loading windows screen comes up then it dumps me into a black screen where I can only see my mouse cursor. Ctrl+Esc doesn't work Ctrl+Alt+Del doesn't work 2) Some of the services come up: DHCP, DNS, DFS, and Print come up 3) The exchange information store and transport service don't start - I tried using mmc to connect to services.msc on the computer and start them but they throw an error message of "Can't start because group or dependency failed" Has anyone had a problem like this? Can anyone offer some guidance? Thanks a bunch!

    Read the article

  • Diff bios - corrupt video driver

    - by sfonck
    Hi, I'm using an Dell M90 Precision Laptop which has a NVidia Quadro FX 2500M graphics card and is running Windows XP. Laptop has been running fine - but a few weeks ago screen went 'white' - restarted computer- bios and startup screens show weird green dots and stripes, normal startup only shows a black screen... only VGA mode works to display something. I've been trying to remove and reinstall the correct drivers downloaded from Dell's website - no solution. I gave up and reinstalled XP - everything was working perfect again. 2 weeks later - again the white screen - tried everything again (flashin new bios also - nothing works) Reinstalled XP - everyhting was working again, so I made a DriveSnapShot of the partition. Today - again the 'white screen'. Ok, no problem ...I was thinking all I needed to do was to restore the DriveSnapShot backup... Few minutes later the backup is restored ... but guess what: video driver does not work correctly... As the DriveSnapShot restored the complete partition, as it was at the time everything was working perfectly, this would mean my driver problems are due to 'settings' in the bios or on the graphics-card itself + these 'settings' can get overridden by doing a new XP-install.... I'm out of options, can somebody help me to find a solution for this problem: Is there some way to backup and restore a bios after seeing some problems? Is there some way to know what is causing this problem like a bios diff utility? Thanks!

    Read the article

  • [SOLVED} How do I restore my audio after uninstalling Ventrilo?

    - by Marcx
    Hi, I've a Dell studio 1555 bought on september with Windows 7 64bit Professional on it. The audio device works proprerly, while listening to audio contents (from disk or internet) When I use Ventrilo, the audio from other people sounds good and I hear their voices clearly When I use any other VOIP programs like Teamspeak 3, MSN or Skype, I hear a disturbed voice, and it's impossible to comprehend something... Anyway everything worked fine until I installed Ventrilo, but removing it didn´t solve my problem. Update: Here's a sample of how I hear others people voices.. Audio Sample After some tests, also the desktop has the same problem. (I tried TeamSpeak3) Here are some details on my laptop and desktop Laptop Dell Studio 1555 Core 2 Duo P8600 2.4Ghz 4Gb Ram Dual Channel Ati HD 4570 512Mb dedicated (up to 2048) IDT High Definition Audio Desktop Motherboard Asus P5KPL-AM Dual Core CPU E5200 2.50Ghz 2x2GB PC6400 Dual Channel Ati Radeon HD 4650 512MB VIA High Definition Audio Both computers have Windows 7 Professional 64Bit. So how do I restore my audio? SOLVED The problem was in router firmware, there was a bug that recognized VoIP traffic as a DOS attack and the router grambled every packet... I've installed the newest firmware and everything is fine :)

    Read the article

  • How can I get DVDs playing after a Vista to XP change?

    - by Liath
    I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

    Read the article

  • How can I get DVDs playing after a Vista to XP change? [closed]

    - by Liath
    I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

    Read the article

  • RAID 5 RECONSTRUCT with RAID Reconstructor

    - by user22914
    I have Dell Poweredge server 2600 with Raid 5 in 3 hard drive Scsi 36gb each, it was fail to boot sinc the third drive is offline. I attached Sata card adapter to Sata hard drive and install OS SERVER 2003 to it, downloaded drivers for Raid and everything goes fine when I use recovery data software called "GetDataBack" from here http://www.runtime.org/data-recovery-software.htm but the problem that not all data recovered, I am still looking for importants data with about 5 GB size. I have another software called "RAID Reconstructor" from "http://www.runtime.org/raid.htm" I thought if I run it to reconstruct that will help to recover more data and put the third drive to be Online but I am afraid that might erase the current data in the other drives. Please I need your advise in how I could retrive the remaining data? Thanks

    Read the article

  • Problems with 2 ISCSI connections esxi 3.5

    - by rphilli5
    I am running a dell poweredge 1950 with 4 nic cards. 1 is bonded to SAN #1 on 192.168.90.xx. The second SAN is on a separate network - 192.168.7.xx The network adapter can view the ip range of the san and the NIC can be pinged from 192.168.7.xx range. vswitch1 and vswitch2 are configured identically except for the ip address. The second SAN has been added to the iscsi software adapter but the SAN is never recognized. I can connect to the SAN from other machines on the local network. Is there something else that needs to be configured for the iscsi software adapter to know which vswitch to use?

    Read the article

  • Dual Nic, one keeps dropping

    - by user1215018
    I'm running windows server 2008 r2 on a dell poweredge 2850. I have 2 NICs, one is configured behind a firewall with a dhcp server on the main local LAN and another one has it's own dedicated connection to one of our 13 static IPs. So in a nutshell we have 2 of our static IPs going to this server, one indirectly through a firewall/dhcp server, and the other directly. I am trying to reach IIS on port 80 and port 443. The problem is that the NIC with the direct connection (NIC2) keeps dropping and says either "No internet connection" or "Unauthenticated". However, the NIC behind the firewall (NIC1) has no problems at all. Update: This is the second time this has happened in 3 days and each time the fix has been enabling the dhcp client on the NIC, allowing it to error out to a 169.x.x.x address, then re-enabling the nic with it's static IP assignment.

    Read the article

  • Set iDRAC IP Address on Ubuntu 12.04 without Reboot?

    - by BT643
    We have a Dell PowerEdge R720XD server and want to setup iDRAC, but this is a production server so we need to do it without a reboot if possible. We just need to set the IP address on the iDRAC but the servers do not have a front LCD panel so we cannot use this. The iDRAC will currently have the default 192.168.0.120 IP address but we are not on this IP range so cannot use this. We need to change it to 192.168.5.x. I've seen racadm mentioned, but before I start messing around installing this on Ubuntu, is this what we need? and will we be able to set the IP address on the DRAC with this? Thanks

    Read the article

  • VMware Server Guest OS Random Shutdown

    - by radioactive21
    Anyone encounter a problem in which the Guest OS in VMware Server randomly shuts down? This has happened about once a month, where VMware Server just shuts down ALL guests OS. The host machine is fine, and you can log into the web management of VMware Server, it's just all guest OS get shutdown with no apparent reason. Even the logs say vmware guest os so and so was shut down, but no details why. This is not just one one machine, we have VMware server installed on three different PowerEdge servers and they all have encounter the same problem. We've tripped checked all settings and nothing is out of the ordinary.

    Read the article

  • Setting up a Windows Server 2008 R2 DC + Fileserver : native or virtual?

    - by user126890
    I want to deploy a new DC + Fileserver using Windows Server 2008 R2 SP1 Standard Edition on a Dell PowerEdge R410 and iSCSI storage for a small business (~30 people). Should I install the system native on the server or use a virt layer? I don't have a budget for virtualization so i gotta go with something free... What's a better working routine, taking snapshots of vm's or taking backups (Acronis/CloneZilla) of systems? If I use a virt system, I need a GUI for some people in the business to reset the system to a earlier state in emergency situations. I wanted to install phpVirtualBox once but never finished, is it suitable in a productive environment? server specs: Intel Xeon E5620 CPU (2,40GHz, 4C, 12MB Cache) 8GB RAM Dual Rank LV RDIMMs 1333MHz 2x 1TB SATA 7,2K 3,5, RAID1

    Read the article

  • How do I recover from a Linux CentOS 4.6 Operating System Crash

    - by Greg Omebije
    Our x86 Linux server running CentOS4.6 has crashed. The machine boots only to the Grub prompt. We have tried using the "rescue mode" to recover the System, but it hasn't worked. How can we fix this problem, so that the machine boots normally? How can we fix this problem to the point were we can recover our files from the server Our Linux Server Configuration: Dell PowerEdge 1950 Intel Xeon 2 HDD (146GB each) 4GB RAM Hardware and Software raid setup CentOS 4.6 We used Sysrecord to boot the computer: the following are the output of fdisk -l Disk /dev/sda: 293.3 GB, 292326211584 255 heads, 63 sectors/track, 35539 Cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 17769 142625070 8e Linux LVM

    Read the article

  • Does servers to >$1000 really have a memory limit of 4GB?

    - by Sandra
    Hi, I am looking for a server, and when I look at the specs some of the servers can only handle 4GB. Other can handle 8GB or 16GB, and others 64GB. Can that really be true? Is this really a hardware limitation, or are they disabling it in the BIOS, so there is no way to use 16GB on a 4GB supported server? An example is the Dell PowerEdge SC 440. Only 4GB supported, they say. Would Linux allow me to use 16GB on a 4GB server? Sandra

    Read the article

  • How much should I charge for setting up a client web server? [closed]

    - by Vincent
    I have quite the eccentric client who wants to move all his ecommerce websites (about 5-10, all PHP/MySQL) to his own web server that I'm supposed to build. He doesn't want to hear anything about VPS hosting and all the issues and expenses related to owning a server. My responsibility would be to buy all the hardware, install and configure software, etc. How much should I charge for this? I'm planning to start with two relatively moderate Dell PowerEdge C2100 servers, one for web (NGINX), one for db (MySQL).

    Read the article

  • Windows 2008 R2 server cannot access shares on other servers

    - by Rob
    I have a problem on my new 2008 R2 64-bit server. Essentially the server sometimes refuses to access shares on other server. in the format \\servernam\sharename sometime it works and then for a few hours it doesn't and then at randon it comes back online. This is a local AD network and have even put in a new gigabit switch between all server. All the old 2003 servers work fine so I know DNS and WINS is all ok. I get error 1006 in eventlog saying that my R2 server can't contact the domain controller when it clearly can. Just to add to the config, it is running on a Dell PowerEdge R410, Vmware Esxi 4.0 and R2 is configured as a terminal server. I can always view shares with FQDN This morning net view \\ did not work but net view \\ did. Very random and very frustrating. any ideas? thanks

    Read the article

  • Replacing a W2K3 Domain Controller - what do I need to know?

    - by Marko Carter
    I have a network of around 70 machines, currently with two DCs both running Windows Server 2003 (DC0 & DC1). DC0 is a five year old Poweredge 1850 and has recently become increasingly flakey, and in the past fortnight has fallen over twice. I want to replace this machine, but I'm cautious as there is huge scope for this sort of thing to go wrong. The way I imagine doing this is building a new machine then doing a DCPROMO and running three domain controllers for a month or so until I'm happy that everything is working as it should be before retiring the old machine. Particular areas of concern are the replication of roles from the current controllers (GP settings for instance) and the ramifications of switching off the machine that has, up until now, been the 'primary'. If there are compelling reasons to use Server 2008 I'm willing to do so, however I don't know if this would cause problems with my exisiting 2003 machines. Any advice on best practice or previous experiences would be most welcome.

    Read the article

  • Raid 5 GPT Partitioning

    - by user39325
    Hi, i have a Dell Poweredge r710 server with five 1 TB disks. All of them are in RAID 5. I was trying to install Centos but it sais "Your boot partition is on disk using GPT Partition...". I read somewhere that centos cant install on 2TB disk, so i made some partiotions smaller, but it's not workin. any idea? p.s. i am going to install Proxmox on that, but Proxmox same doesnt accept 2TB disks...

    Read the article

  • Windows server 2008 r2 console stuck at "waiting for user profile service"

    - by support
    Hi, I have a windows 2008 R2 server, running on dell poweredge t300. Using hyper-v to run a windows 2008 R2 server also. Suddenly, today, my virtual console (on the virtual copy of windows 2008 server r2) will not let me login as administrator. It starts to login but then sticks at the message: Please wait for the User profile Service and is unresponsive to keypresses (incl ctrl-alt-del). The only way out is a crash. It starts up in safe mode without networking ok but not in safe mode with networking. Any suggestions on how to fix this would be appreciated Thanks

    Read the article

  • RAID 10: SPAN 2 vs SPAN 4

    - by LaDante Riley
    I am currently configuring RAID 10 (first time doing RAID ever) for a server at work. In the Configuration Utility. I am given the option of either span 2 or span 4. Having never done this before, I was curious if someone could tell me the pros and cons of for each span? Thanks The server is a Poweredge r620 with a PERC H710 mini (Security Capable) RAID controller. I have 8 600GB hard drives. I am creating this server as a network storage drive. I have SQL server historian database whose 1TB storage filled up and after 5 years of logging data.

    Read the article

  • Only One GPU Detected in the Nvidia Quadra NVS 450

    - by Kyle Brandt
    I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

    Read the article

  • pfsense CARP - wan failure on firewall

    - by eldblz
    I have recently configured 2 firewall (on 2 DELL PowerEdge R210II with ESXI 5.1) with pfsense. We have several LANs and 2 WANs. Everything is running fine but i have a strange behavior: i can access internet from alla LANs but not from the firewall (itself). For example the firewall cannot retrive package information or if i setup a gatway monitor ip (like google 8.8.8.8 ) this fails. These are the screenshots of firewall configuration: http://imgur.com/a/LNuMz#0 ATM i kept firewall rules to minimum to avoid problem or conflicts. Any ideas how to solve the problem? Thank you in advance.

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >