Search Results

Search found 1591 results on 64 pages for 'oop criticism'.

Page 52/64 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

• Web workflow solution - how should I approach the design?

  - by Tom Pickles

  We've been tasked with creating a web based workflow tool to track change management. It has a single workflow with multiple synchronous tasks for the most part, but branch out at a point to tasks running in parallel which meet up later on. There will be all sorts of people using the application, and all of them will need to see their outstanding tasks for each change, but only theirs, not others. There will also be a high level group of people who oversee all changes, so need to see everything. They will need to see tasks which have not been done in the specified time, who's responsible etc. The data will be persisted to a SQL database. It'll all be put together using .Net. I've been trying to learn and implement OOP into my designs of late, but I'm wondering if this is moot in this instance as it may be better to have the business logic for this in stored procedures in the DB. I could use POCO's, a front end layer and a data access layer for the web application and just use it as a mechanism for CRUD actions on the DB, then use SP's fired in the DB to apply the business rules. On the other hand, I could use an object oriented design within the web app, but as the data in the app is state-less, is this a bad idea? I could try and model out the whole application into a class structure, implementing interfaces, base classes and all that good stuff. So I would create a change class, which contained a list of task classes/types, which defined each task, and implement an ITask interface etc. Put end-user types into the tasks to identify who should be doing what task. Then apply all the business logic in the respective class methods etc. What approach do you guys think I should be using for this solution?

  Read the article

• Should I choose Doctrine 2 or Propel 1.5/1.6, and why?

  - by Billy ONeal

  I'd like to hear from those who have used Doctrine 2 (or later) and Propel 1.5 (or later). Most comparisons between these two object relational mappers are based on old versions -- Doctrine 1 versus Propel 1.3/1.4, and both ORMs went through significant redesigns in their recent revisions. For example, most of the criticism of Propel seems to center around the "ModelName Peer" classes, which are deprecated in 1.5 in any case. Here's what I've accumulated so far (And I've tried to make this list as balanced as possible...): Propel Pros Extremely IDE friendly, because actual code is generated, instead of relying on PHP magic methods. This means IDE features like code completion are actually helpful. Fast (In terms of database usage -- no runtime introspection is done on the database) Clean migration between schema versions (at least in the 1.6 beta) Can generate PHP 5.3 models (i.e. namespaces) Easy to chain a lot of things into a single database query with things like useXxx methods. (See the "code completion" video above) Cons Requires an extra build step, namely building the model classes. Generated code needs rebuilt whenever Propel version is changed, a setting is changed, or the schema changes. This might be unintuitive to some and custom methods applied to the model are lost. (I think?) Some useful features (i.e. version behavior, schema migrations) are in beta status. Doctrine Pros More popular Doctrine Query Language can express potentially more complicated relationships between data than easily possible with Propel's ActiveRecord strategy. Easier to add reusable behaviors when compared with Propel. DocBlock based commenting for building the schema is embedded in the actual PHP instead of a separate XML file. Uses PHP 5.3 Namespaces everywhere Cons Requires learning an entirely new programming language (Doctrine Query Language) Implemented in terms of "magic methods" in several places, making IDE autocomplete worthless. Requires database introspection and thus is slightly slower than Propel by default; caching can remove this but the caching adds considerable complexity. Fewer behaviors are included in the core codebase. Several features Propel provides out of the box (such as Nested Set) are available only through extensions. Freakin' HUGE :) This I have gleaned though only through reading the documentation available for both tools -- I've not actually built anything yet. I'd like to hear from those who have used both tools though, to share their experience on pros/cons of each library, and what their recommendation is at this point :)

  Read the article

• How can i be sure that professional programming is not for me ?

  - by user17766

  Hello everybody I love programming, developing projects for hobby and learning new concepts. I am getting harder too much in current job Despite learnt many thing well. I can even hardly understand assigned tasks. I am asking why i am getting harder to myself. It may not my fault? Our architecture doesn't spend enough time to explain complicated sides of project for us or i am not enough smart one for understand fastly. Our architecture also doesn't know what kind of hell he is creating ? Seeing 3 level generic types and 4-5 level generic inheritance in domain model objects hell makes me think so really. It looks abusing concepts more than reduce complexity. Thinking that he hasn't experienced before such a big project while he is getting confused in problems of the project. May i am not in right company ? May i am not good programmer ? May i am really stupid ? Become good in programming concepts is not enough to deal big project's complications so someone should to tell me that i have to still effort too much even i am good programmer for adopting myself to any big project ? Also i had another bad experiences from previous job but my professional experiences is almost few months but i spend 2 years for learning and coding for fun and i really can say that i have well skills on OOP, Design Patterns, coding standards and deep knowledge in language currently used. Sometimes i am thinking to leave programming professionally and work in any lame job while doing programming just for hobby. Waiting suggestions and insights

  Read the article

• JavaScript objects and Crockford's The Good Parts

  - by Jonathan

  I've been thinking quite a bit about how to do OOP in JS, especially when it comes to encapsulation and inheritance, recently. According to Crockford, classical is harmful because of new(), and both prototypal and classical are limited because their use of constructor.prototype means you can't use closures for encapsulation. Recently, I've considered the following couple of points about encapsulation: Encapsulation kills performance. It makes you add functions to EACH member object rather than to the prototype, because each object's methods have different closures (each object has different private members). Encapsulation forces the ugly "var that = this" workaround, to get private helper functions to have access to the instance they're attached to. Either that or make sure you call them with privateFunction.apply(this) everytime. Are there workarounds for either of two issues I mentioned? if not, do you still consider encapsulation to be worth it? Sidenote: The functional pattern Crockford describes doesn't even let you add public methods that only touch public members, since it completely forgoes the use of new() and constructor.prototype. Wouldn't a hybrid approach where you use classical inheritance and new(), but also call Super.apply(this, arguments) to initialize private members and privileged methods, be superior?

  Read the article

• Designing javascript chart library

  - by coolscitist

  I started coding a chart library on top of d3js: My chart library. I read Javascript API reusability and Towards reusable charts. However, I am NOT really following the suggestions because I am not really convinced about them. This is how my library can be used to create a bubble chart: var chart = new XYBubbleChart(); chart.data = [{"xValue":200,"yValue":300},{"xValue":400,"yValue":200},{"xValue":100,"yValue":310}]; //set data chart.dataKey.x = "xValue"; chart.dataKey.y = "yValue"; chart.elementId = "#chart"; chart.createChart(); Here are my questions: It does not use chaining. Is it a big issue? Every property and function is exposed publicly. (Example: width, height are exposed in Chart.js). OOP is all about abstraction and hiding, but I don't really see the point right now. I think exposing everything gives flexibility to change property and functionality inside subclasses and objects without writing a lot of code. What could be pitfalls of such exposure? I have implemented functions like: zooming, "showing info boxes when data point is clicked" as "abilities". (example: XYZoomingAbility.js). Basically, such "abilities" accept "chart" object, play around with public variables of "chart" to add functionality. What this allows me to do is to add an ability by writing: activateZoomAbility(chartObject); My goal is to separate "visualization" from "interactivity". I want "interactivity" like: zooming to be plugged into the chart rather than built inside the chart. Like, I don't want my bubble chart to know anything about "zooming". However, I do want zoomable bubble chart. What is the best way to do this? How to test and what to test? I have written mixed tests: jasmine and actual html files so that I can test manually on browser.

  Read the article

• Functional Languages that compile to Android's Dalvik VM?

  - by Berin Loritsch

  I have a software problem that fits the functional approach to programming, but the target market will be on the Android OS. I ask because there are functional languages that compile to Java's VM, but Dalvik bytecode != Java bytecode. Alternatively, do you know if the dx utility can intelligently convert the .class files generated from functional languages like Scala? Edit: In order to add a bit more helpfulness to the community, and also to help me choose better, can I refine the question a bit? Have you used any alternate languages with Dalvik? Which ones? What are some "gotchas" (problems) that I might run into? Is performance acceptable? By that, I mean the application still feels responsive to the user. I've never done mobile phone development, but I grew up on constrained devices and I'm under no illusion that there is a cost to using non-standard languages with the platform. I just need to know if the cost is such that I should shoe-horn my approach into default language (i.e. apply functional principles in the OOP language).

  Read the article

• How can we protect the namespace of an object in Javascript?

  - by Eduard Florinescu

  Continuing from my previous question: Javascript simple code to understand prototype-based OOP basics Let's say we run into console this two separate objects(even if they are called child and parent there is no inheritance between them): var parent = { name: "parent", print: function(){ console.log("Hello, "+this.name); } }; var child = { name: "child", print: function(){ console.log("Hi, "+this.name); } }; parent.print() // This will print: Hello, parent child.print() // This will print: Hi, child temp =parent; parent = child; child = temp; parent.print() // This will now print: Hi, child child.print() // This will now print: Hello, parent Now suppose that parent is a library, as a HTML5 application in a browser this cannot do much harm because is practically running sandboxed, but now with the advent of the ChromeOS, FirefoxOS and other [Browser] OS they will also be linked to a native API, that would be a head out of the „sandbox”. Now if someone changes the namespace it would be harder for a code reviewer (either automated or not ) to spot an incorrect use if the namespaces changes. My question would be: Are there many ways in which the above situation can be done and what can be done to protect this namespaces? (Either in the javascript itself or by some static code analysis tool)

  Read the article

• Learning to be a good developer: what parts can you skip over?

  - by Andrew M

  I have set myself the goal of becoming a decent developer by this time next year. By this I mean full experience of the development 'lifecycle,' a few good apps/sites/webapps under my belt, and most importantly being able to work at a steady pace without getting sidelined for hours by some should-know-this-already technique. I'm not starting from scratch. I've written a lot of html/css, SQL, javascript, python and VB.net, and studied other languages like C and Java. I know about things like OOP, design patterns, TDD, complexity, computational linguistics, pointers/references, functional programming, and other academic/theoretical matters. It's just I can't say I've really done these things yet. So I want to get up to speed, and I want to know what things I can leave till a later date. For instance, studying algorithms and the maths behind them is interesting and all, but so far I've hardly needed to write anything but the most basic nested loops. Investigating Assembly to have a clearer picture of low-level operations would be cool... but I imagine rarely infringes on daily work. On the other hand, looking at a functional programming language might help me write programs that are more comprehensible and less prone to hidden failures (at the moment I'm finding the biggest difficulty is when the complexity of the app exceeds my capacity to understand it - for instance passing data around was fine... until I had to start doing it with AJAX, which was a painful step up). I could spend time working through case studies of design patterns, but I'm not sure how many of them get used in 'real life.' I'm a programmer with basic abilities - what skills should I focus on developing? (also my Unix skills are very weak, and also knowledge of Windows configuration... not sure how much time I should spend on that)

  Read the article

• How to explain pointers to a Java/VB programmer

  - by Skeith

  I am writing a game and my friend has offered to help me as it is a RPG and will take a long time to do the "scripting" bit of the game. The problem is IMO he's not that good a programmer :( (add flame war here). He has only programmed in Java and VB and keeps saying really stupid things to me like "Why don't you drag and drop an onClick event" to design my UI when I'm using DirectX. I tried explaining pointers to him but his response was, if it's just a variable that holds a memory address, why don't you just use an int? I create an instance of an attack class and give the creature a pointer to it so if several creatures use the same attack there is only one instance of it. He keeps saying why not put if statements in the creature class for every attack class and set true for the ones that are there. He has programmed mainly in VB and a little in Java just to learn OOP. How can I explain advanced C++ concepts like pointers and memory management to him? He just doesn't understand there are no super functions like form.show in C++.

  Read the article

• Visual Basic link to SQL output to Word

  - by CLO_471

  I am in need of some advice/references. I am currently trying to develop a legal document interface. There are certain fields in which I need to query out of my sql db and have those fields output into a document that can be printed. I am trying to develop a user interface where people can enter fields that will output to a document template but at the same time I need the template to be able to pull data from the SQL database. This is the reason why I think that VB might be my best choice and because it is one of the only OOP languages I am familiar with presently. Does anyone know that best way to be able to handle this type of job?? I know that you can use VBA within MS Word and have the form output variables to a word template. But, is there a way to have the word document also pull information from the SQL db? Is the best option to use VB linked to SQL and run queries to get the information from the database and then have it output to a for within VB? Is it possible for VB to be linked to a SQL db and output variables and SQL fields to a Word Template? I have looked into Mail Merge and I see that it allows users to pull data from an Access query but I dont think it would be easy to automate and it seems that users would need to have an advanced knowledge of MS Word and Access to handle this. I am not finding much useful information online so I came here. Any advice or references would be greatly appreciated. If there is a better way please let me know.

  Read the article

• Should I go with OpenGL to see my future in Game Development industry? [closed]

  - by Priyank

  Possible Duplicate: Should I continue studying OpenGL or just switch to DirectX to give me a better chance of landing a job in the game industry? I tried Google but found quite old articles, so I am in search of an answer in context to year 2012. Hi all, I don't know if you will consider this question appropriate for this community but I am constantly searching for a perfect answer. What I have seen is that most of the games that are released these days are DirectX 1x based. Except for few games like Starcraft or Diablo which don't have high end graphics are using OpenGL. So I have few questions to ask. The platforms i would like to target are PC (windows), Xbox 360 and PS3 (must). Should I go with learning OpenGL to see my future in game development industry? Or should I shift to Directx? If I learn OpenGL first, will it be difficult to learn direcx then? Which API is most suitable for indie development? Which one of the two API's are better from coder's (programmer's) point of view? Like OOP and style of coding. Is openGL being cross platform should be the only reason to choose it over Directx? Even when vendors are not providing enough stable drivers for it. Thanks in advance. I have read this post, but I have few questions. Should I continue studying OpenGL or just switch to DirectX to give me a better chance of landing a job in the game industry?

  Read the article

• Formal definition for term "pure OO language"?

  - by Yauhen Yakimovich

  I can't think of a better place among SO siblings to pose such a question. Originally I wanted to ask "Is python a pure OO language?" but considering troubles and some sort of discomfort people experience while trying to define the term I decided to start with obtaining a clear definition for the term itself. It would be rather fair to start with correspondence by Dr. Alan Kay, who has coined the term (note the inspiration in biological analogy to cells or other living objects). There are following ways to approach the task: Give a comparative analysis by listing programming languages that exhibits certain properties unique and sufficient to define the term (although Smalltalk and Java are passing examples but IMO this way seems neither really complete or nor fruitful) Give a formal definition (or close to it, e.g. in more academic or mathematical style). Give a philosophical definition that would totally rely on semantical context of concrete language or a priori programming experience (there must be some chance of successful explanation by the community). My current version: "If a certain programing (formal) language that can (grammatically) differentiate between operations and operands as well as infer about the type of each operand whether this type is an object (in sense of OOP) or not then we call such a language an OO-language as long as there is at least one type in this language which is an object. Finally, if all types of the language are also objects we define such language to be pure OO-language." Would appreciate any possible improvement of it. As you can see I just made the definition dependent on the term "object" (often fully referenced as class of objects).

  Read the article

• Prioritize compiler functionality/tasks, when designing a new language

  - by Mahdi

  Well, the question should be so hard to ask and I expect couple of down votes, however, I'm really interested to have your ideas and recommendations. :) I've already made a very simple compiler, with a few and limited functionality. Now I'm getting more on it to make it more like a real-world compiler. I definitely need to start over 'cause I've much more experience and ideas in this area rather a few years ago. So, I want to know, right now, from the very first step again, which tasks/features for the new compiler should implement first and which tasks has lower priority rather than others? For example, I'd say, first I'd go to decide about the object-oriented structure for the new language, but you might say, hey, just go for a compiler that could define a variable, when you finished that, then start thinking about OOP designs ... I prefer to hear the pros and cons for your suggestions also. Actually I like to start from Bottom to Top, where I could add simplest tasks first, and later adding more complex ones, but I'm totally open for any new ideas, and really appreciate that. Also please consider that I'm thinking about the design concepts. Actually I expect answers like: Priority from Highest to Lowest: variables, because .... functions, because .... loops, because .... ... Not: define a syntax for your new language, and start parsing your source code ...

  Read the article

• Why not have a High Level Language based OS? Are Low Level Languages more efficient?

  - by rtindru

  Without being presumptuous, I would like you to consider the possibility of this. Most OS today are based on pretty low level languages (mainly C/C++) Even the new ones such as Android uses JNI & underlying implementation is in C In fact, (this is a personal observation) many programs written in C run a lot faster than their high level counterparts (eg: Transmission (a bittorrent client on Ubuntu) is a whole lot faster than Vuze(Java) or Deluge(Python)). Even python compilers are written in C, although PyPy is an exception. So is there a particular reason for this? Why is it that all our so called "High Level Languages" with the great "OOP" concepts can't be used in making a solid OS? So I have 2 questions basically. Why are applications written in low level languages more efficient than their HLL counterparts? Do low level languages perform better for the simple reason that they are low level and are translated to machine code easier? Why do we not have a full fledged OS based entirely on a High Level Language?

  Read the article

• PHP - Making CMS (architecture, etc.)

  - by UnknownProgramer

  I'm in the stage of planning new CMS. Before I used WordPress and other open source CMS for my clients, but I always had to write new modules and even mess with the code in order to do certain things. Which as you understand is not the best thing to do. So I finally decided to make my own CMS to work with, the way I need. But before I start it, I would like to think it trough carefully to ensure that I won't need to rewrite it ground up, just because I forgot to include some feature into architecture or did it wrong. I would like to hear your thoughs and the most important I would like you to suggest me some articles or books on that subject, especially on architecture of such systems. I googled a few good books, but that is not enough. The way I'm planning to do it: PHP5, completely OOP, modules architecture. You make a page and add any modules you need there, but modules are not global, but local to a page so you can make two pages with the same module, but content will be different if you set different "content ID" for these two entities. But it can be set the same, so two pages has the same content of the modules put there. Also I plan to support online storage web service (like amazon S3) for images and files, so I would like to hear your thoughs on it too. Also I have not yet decided how to store language data. I don't want to use DB for that, but I haven't decided yet. Also I think I will support other DB with global DB class and separate DB wrappers for MySQL and other databases. And, well, I would appreciate any other information you can provide for that subject.

  Read the article

• How Big Data and Social Won the Election

  - by Mike Stiles

  The story of big data’s influence on the outcome of the US Presidential election is worth a good look, because a) it’s a harbinger of things to come, and b) it’s an example of similar successes available to any enterprise seriously resourcing integrated big data, modeling, and data-driven execution on all assets, including social. Obama campaign manager Jim Messina fielded a data and analytics brain trust 5 times larger than 2008. At that time, there were numerous databases from various sources, few of them talking to each other. This time, the mission was to be metrics-centered and measure everything measurable, and in context with all the other data. Big data showed them exactly what they needed to know and told them what to do about it. It showed them women 40-49 on the west coast would donate big money if they got to eat with George Clooney. Women on the east coast would pony up to hang out with Sarah Jessica Parker. Extensive daily modeling showed them what kinds of email appeals, from who, and to whom, would prove most successful in raising cash, recruiting volunteers, and getting out the vote. Swing state voters were profiled and approached with more customized targeting that at any time in history. Ads were purchased on specific shows watched by the targets, increasing efficiency 14% over traditional media buys. For all the criticism of the candidate’s focus on appearing on comedy and entertainment shows, and local radio morning shows, that’s where the data sent them to reach the voters most likely to turn out for them. And then there was social. Again, more than in any other election, Facebook was used for virtual, highly efficient door-to-door canvasing. Facebook fans got pictures of friends in swing states and were asked to encourage them to act. Using that approach, 1 in 5 peer-to-peer appeals led to the desired action. Assumptions, gut, intuition, campaign experience, all took a backseat to strategy shifts solidly backed up by data. Zeroing in on demographics likely to back the President and tracking their mood daily literally changed the voter landscape. The Romney team watched Obama voters appear seemingly out of thin air. One Obama campaign aide said, “We ran the election 66,000 times every night.” Which brings us to your organization. If you’re starting to feel like the battle-cry of “but this is the way we’ve always done it” is starting to put you in an extremely vulnerable position, you’re right. Social has become a key communication tool of the 21st century. Failing to use it, or failing to invest in a deep understanding of who your customers and prospects are so the content you post there will achieve desired actions and results, will leave you waking up one morning wondering, “What happened?”@mikestilesPhoto stock.xchng

  Read the article

• Example of persisting an inheritance relationship using ORM

  - by Schemer

  I have some experience with OOP and RDBs, but very little exposure to web programming. I am trying to understand what non-trivial types of problems are solved by ORM. Of course, I am familiar with the need for data persistence, but I have never encountered a need for persisting relationships between objects, a situation which is indicated in many online articles about ORM. I am not asking about the process of persisting a POJO to a database and restoring it later. Nor am I asking about why ORM frameworks are useful -- or a pain in the butt -- for doing so. I am particularly interested in how the need arises to persist and restore relationships between objects. In various documentation, I have seen many examples of persisting POJOs to a database, but the examples have all been for only very simple objects that are essentially nothing more than records anyway: a constructor, some private fields, and getter/setter methods. The motivation for persisting such an "object-record" seems obvious and trivial. This example: Hibernate ORM Tutorial offers such an example, but goes on to discuss mismatch issues of granularity, inheritance, identity, associations, and navigation that are not motivated by the example. If someone could offer a toy example of an instance where, say, the need arises to persist an inheritance relationship, I would be grateful. This might be blindingly obvious for anyone who has already encountered this situation but I have not and a great deal of searching and reading have not turned up any examples.

  Read the article

• Can I remove the systems from a component entity system?

  - by nathan

  After reading a lot about entity/component based engines. I feel like there is no real definition for this kind of engine. Reading this thread: Implementing features in an Entity System and the linked article made me think a lot. I did not feel that comfortable using System concept so I'll write something else, inspired by this pattern. I'd like to know if you think it's a good way to organize game code and what improvements can be made. Regarding a more strict implementation of entity/component based engine, is my solution viable? Do I risk getting stuck at any point due to the lack of flexibility of this implementation (or anything else)? My engine, as for entity/component patterns has entities and components, no systems since the game logic is handled by components. Also, I think the main difference is the fact that my engine will use inherence and OOP concepts in general, I mean, I don't try to minimize them. Entity: an entity is an abstract class. It holds his position, width and height, scale and a list of linked components. The current implementation can be found here (java). Every frame, the entity will be updated (i.e all the components linked to this entity will be updated), and rendered, if a render component is specified. Component: like for entity, a component is an abstract class that must be extended to create new components. The behavior of an entity is created through his components collection. The component implementation can be found here. Components are updated when the owning entity is updated or for only one specific component (render component), rendered. Here is an example of a logic component (i.e not a renderable component, a component that's updated each frame) in charge of listening for keyboard events and a render component in charge of display a plain sprite (i.e not animated).

  Read the article

• How to do Cross Platform in own Engine? [on hold]

  - by Mineorbit

  At the Moment I finished the first game with my game engine(if I wanna call it like that) which is based in LWJGL. Now i'm worring if I could do crossplattforming in my engine. I build me a tool tool with a batch file to compile my project dir into an .exe . At first i'm looking to do it on Android with an comparable batch file. An link for an tutorial would be awesome! At next place there would be an renderer and audiosystem. If read that theres an OpenGL ES renderer, and I allready played a bit around with the Android SDK. But I use the Texture and Audio class in slick-util. So I thought about creating OOP classes that carry around the data and load it in an platform specific Buffer. A Link for an equaly easy-to-use Texture or Audio class would be awesome! Thats all for now! Answers would be awesome! Thanks, Mineorbit!

  Read the article

• Advice for how to handle company pride

  - by user17971

  We have this "amazing" little product using the latest development methodologies, components with all the bells and whistles. I took over this product maybe 6 months ago and struggled with it from day one. Even though it is supposedly is state of the art because of all its amazing structure, using dependency injections, inversion of control from the unity framework, hibernation and is domain driven in a .net mvvm xaml application to make it streamlined and modular. I knew from the moment I saw the monolith that it was going to be an uphill struggle for me. A lot of little code-bits scattered all around in neatly organized paradigms. Debugging is difficult, tracing the code is difficult, making new code is difficult, although some modifications is surprisinly easy but it doesn't out weight the problems I have with the code by a long shot. When I took over the project I was told that the new management console was ready for delivery and all I had to do was compile it and drop it. This was the beginning of a uphill struggle, our customer didn't agree at all that this was the functionality they had asked for so I had to do modifications to the program to their specifications. Since the project pretty much has been overdue since I took over it it has always been important that we didn't add or change much to the original system. I could modify the existing bits. fast forward until today where I finally completed all their comments and issues with the program but now I think that the users has opened their eyes (even though they saw this program many times) that they will be going backwards with this new system, that it will be much worse than the tool they got today (for a long time due to the fact that I'm the only resource on the project, project manager, tester, developer, integration specialist etc) My problem is that I lost faith in this system quite early due to the nature of the program. Although I made many changes and improvements to the system I wholeheartedly sympathize with the poor users who are going to start using this system. Its not nearly doing all the things it should do. I had this conversation internally with my boss where I told him what I thought about it, that if I were the customer I wouldn't have spent money developing it. So what do I do now? The system in ready, on a staging system and nobody likes it, its too slow and boring and does maybe do 50% of what they need it to do. Despite how much energy and working around the clock I've done to this project: I won't mind scrapping the system but we've spent much money (well my salaries) developing it and my company wants us to be proud of everything we do and advocate it. How will I tackle the contractor when he asks for advice? Surely I can tell him, this is what we agreed upon based on your use case scenarios, and be done with it? How will I inform my boss about this progress? He knows what I feel about it but I always get the feeling he let my criticism pass him by as just hot air, gone tomorrow,.

  Read the article

• Inspiring the method of teaching. Example- C++ :)

  - by Ashwin

  A year ago I graduated with a degree in Computer Science and Engineering. Considering C++ as the first choice of programming language I have been in the process of learning C++ in many ways. At first - five years back - I had many conceptions, most of which were so abstract to me. It started when I knew almost everything about Structs in C and nothing about Classes in C++. I went through a great time experimenting them all and learning a lot. I had a hard time evaluating Procedural programming vs Object-Oriented Programming. Deciding when to choose Procedural or Object-Oriented Programming took a great deal of patience for me. I knew that I cannot underestimate any of these Programming styles... Though Procedural programming is often a better choice than simple sequential unstructured programming, when solving problems with procedural programming, we usually divide one problem into several steps in order regarded as functions. Then we call these functions one by one to get the result of the problem. When solving problems with Object Oriented Priciples we divide one problem into several classes and form the interaction between them. Evaluating these two at the beginning (as a learner) required a lot of inspiration and thoughts. Instructing to think step by step. Relative concepts to understand deeply. Intensive interests to contrast both solving in both POP and OOP. If you were ever a mentor: What ideas/methods would you teach to students in which it will Inspire them to learn a programming language (in general, computer sciences)?

  Read the article

• CodePlex Daily Summary for Saturday, May 17, 2014

  CodePlex Daily Summary for Saturday, May 17, 2014Popular ReleasesSEToolbox: SEToolbox 01.030.008 Release 1: Fixed cube editor failing to apply color to cubes. Added to cube editor, replace cube dialog, and Build Percent dialog. Corrected for hidden asteroid ore, allowing rare ore to show when importing an asteroid, or converting a 3d model to an asteroid (still appears to be limitations on rare ore in small asteroids). Allowed ore selection to Asteroid file import. (Can copy/import and convert existing asteroid to another ore). Added progress bars to common long running operations. Fixed ...Better Robocopy GUI: Command Line GUI for Robocopy: Better Robocopy GUI had become the primary plugin in Command Line GUI built on .NET 4CTI Text Encryption: CTI Text Encryption 5.3: Change Log: - Remove read only behavior of text area of encrypted text. - Minor UI functionality update.Mini SQL Query: Mini SQL Query (1.0.71.456): Minor fixes and template corrections.QuickMon: Version 3.10: Adding the ability to see 'history' of Collector states (including details of errors or warnings at that time). The history size is configurable (default is switched off) and the Windows Service completely ignores keeping history (no UI or user to access it anyway). The Collector stats window now displays this history plus multiple collector stats windows can be opened at the same time. Additionally fixed a bug in the event log collector that reported an 'Error' state when an 'out of bounds' ...TFS Planning and Disaster Recovery Avoidance Guide: v1.4.BETA - TFS, DR and Azure IaaS Planning Guides: Welcome to the TFS Planning and DR Avoidance Guidance What is new? A new crisper, more compact style, which is easier to consume on multiple devices without sacrificing any content. Also included are the new TFS on Azure IaaS guide and supplementary guides. Note Capacity planning workbook and posters are included in the Everything Zip package. Quality-Bar Detail Documentation has been reviewed by Visual Studio ALM Rangers Documentation has been through an independent technical review ...WinAudit: WinAudit Freeware v3.0: WinAudit.exe v3.0 MD5: 88750CCF49FF7418199B2645755830FA Known Issues: 1. Report creation can be very slow when right-to-left (Hebrew) characters are present. 2. Emsisoft Anti-Malware may stop and/or quarantine WinAudit. This happens when WinAudit attempts to obtain a list if running programmes. You will need to set an exception rule in Emsisoft to allow WinAudit to run.Aspose for Sitefinity: Sitefinity Export to Microsoft Word and PDF: Aspose Sitefinity Content Export Add-on allow users to export online content into Microsoft Word or Adobe Acrobat PDF document using Aspose.Words. This Add-on makes it very simple and easy to have an offline copy of your favorite online content for editing, sharing and printing etc. in popular Microsoft Word Doc/Docx or PDF format. It adds simple Export to Word and Export to Pdf buttons at any desired location on the page and clicking the button dynamically exports the content of the page int...MVCwCMS - ASP.NET MVC CMS: MVCwCMS 2.2.2: Updated CKFinder config. For the installation instructions visit the documentation page: https://mvcwcms.codeplex.com/documentationTerraMap (Terraria World Map Viewer): TerraMap 1.0.4: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed installer not uninstalling older versions The setup file will make sure .NET 4 is installed, install TerraMap, create desktop and start menu shortcuts, add a .wld file association, and launch TerraMap. If you prefer the zip ...WPF Localization Extension: v2.2.1: Issue #9277 Issue #9292 Issue #9311 Issue #9312 Issue #9313 Issue #9314CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.1.41167 Release: This release of the CtrlAltStudio Viewer includes the following significant features: Oculus Rift support. Stereoscopic 3D display support. Variable walking / flying speed. Xbox 360 Controller support. Kinect for Windows support. Based on Firestorm viewer 4.6.5 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-1-41167-release Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http:/...ParserIO: ParserIO v1.0.0.3: Fixed some bug about AIM Symbology IDSSIS SFTP Task Control Flow Component: SSIS SFTP v2 for SQL Server 2012: Please report you to the Documentation page for installation instructions.Grade Calculator For BTEC First Diploma in IT level 2: Grade Calculator For BTEC First Diploma in IT: Grade Calculator For BTEC First Diploma in IT level 2Spaghetti CMS: Version 1.50: New: Backend with new design, bootstrap integration New: Patch function for assigning themes, master page files to pages New: Wysiwyg editor (possible to link css file against editor) and filemanager New: Support time triggered content New: Edit css, js, skin, master file within the CMS New: Dynamically add controls to the CMS New: Change password for an user (usermanagement) New: Localize CMS In the near future we will open our new website for documentation and demo. http://...ExtJS based ASP.NET Controls: FineUI v4.0.6: FineUI（???） ?? ExtJS ??? ASP.NET ??? FineUI??? ?? No JavaScript，No CSS，No UpdatePanel，No ViewState，No WebServices ??????? ?????? IE 8.0+、Chrome、Firefox、Opera、Safari ???? Apache License v2.0 ?：ExtJS ?? GPL v3 ?????(http://www.sencha.com/license) ???? ??：http://fineui.com/ ??：http://fineui.com/bbs/ ??：http://fineui.com/demo/ ??：http://fineui.com/doc/ ??：http://fineui.codeplex.com/ FineUI ???? ExtJS ????????，???? ExtJS ?，?????： 1. ????? FineUI ? ExtJS ? http://fineui.com/bbs/forum.ph...Office App Model Samples: Office App Model Samples v2.0: Office App Model Samples v2.0Readable Passphrase Generator: KeePass Plugin 0.13.0: Version 0.13.0 Added "mutators" which add uppercase and numbers to passphrases (to help complying with upper, lower, number complexity rules). Additional API methods which help consuming the generator from 3rd party c# projects. 13,160 words in the default dictionary (~600 more than previous release).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.25.0: Release v1.0.25.0 MemberInfo/MethodInfo popup is now positioned properly to fit the screen In MethodInfo popup method signatures are word-wrapped Implemented Debug text value visualizer Pining sub-values from Watch PanelNew ProjectsAllowing Multiple Attachments for SharePoint 2013 Custom Lists: This code supports basic upload multiple attachments to Custom List item and should be able to attach the existing file name override.Azure File Depot: The Azure File Depot is an effort to provide sample implementations of various tasks related to using blob storage to move files around.CRM Customization Comparer - 2011 and 2013: Compare your Dynamics CRM Solution files via XML Diff. Graphical interface to quickly assess changes. Features: - Graphical UI - Supports CRM 2011 and 2013ElectrosLtd DSA Assignment: This program was created in order to make use of models views and controllersGPS Tracking: A GPS Tracker App.OOP-2112110195: mon:OOP ten:mai duy tanPowerShell Task Control Flow Component for SSIS: Launch PowerShell Script/Commands from SSIS - An another Custom Control Flow Component with the new "PowerShell Task" (currently targets PowerShell 3.0)Quan ly giai bong da: Qu?n lý gi?i bóng dá ngo?i hang AnhSharePoint PDF OpenDocument: SharePoint PDF Content type (Sandbox solution) One OpenDocuments Com+ server for PDF content Adobe software not included but required.Useful Classes: Useful Classes is a DLL that I have written to include a ton of features from one file within your project. ??????-??????【??】??????????: ??????????????,??????????????????,????????,??????????????、????。 ??????-??????【??】??????????: ????????????????????,?????????。????????????,??????,????,????,?????????！ ????-????【??】????????: ????????????300??,????????、???????、????、????????、?????,??????:????,????,???????！ ?????-?????【??】?????????: ?????????????????????,?? ???????,??????? ???,????? , ???? ?????,?????????????。 ?????-?????【??】?????????: ???????????? , ???? ?????,??????????????,????,????,??????。 ??????-??????【??】??????????: ????????????????,????(??)????????，??????，????，???，????，???????! ??????-??????【??】??????????: ?????????????????????,????????,????????,????,????,??????，???????! ?????-?????【??】?????????: ?????????????????,?????,???，???、???、?????,???,?????,???????????????. ?????-?????【??】?????????: ???????????:???????,????,????,????,??????????,????,????,????。??????... ?????-?????【??】?????????: ??????????????????????，?????、???、????，????，???、???、???、???、???，????，?????！ ??????-??????【??】??????????: ????????????、??、???????????,??????,????????,??????????????????...????。 ????-????【??】????????: ??????????????????????,?????????,??????????,????????,?????! ????-????【??】????????: ?????????????、???????,?????????,???????????????,?????????????。 ?????-?????【??】?????????: ?????????????、?????????,?????????,????,????????,????????????????! ?????-?????【??】?????????: ?????????????????,????????,??????????????,?????????,????,????,??????。

  Read the article

• Trying to find a recent - PHP book - that utilizes SOLID principles! [closed]

  - by darga33

  Pulling my hair out! I have heard of Martin Fowler's book PoEAA and the other book Head First OOA OOD but those are not in PHP. I desperately want to read them, but ONLY in PHP utilizing the - SOLID acronym - principles! Does anyone know of the absolute best, most recent PHP book that utilizes the SOLID principles and GRASP, and all the other best practices? I want to learn from the best possible source! Not beginner books! I already understand OOP. This seems like an almost impossible question to find the answer to and so I thought, hey, might as well post on stackexchange!! Surely someone out there must know!!!!!!!!!! Or if noone happens to know, Maybe they know of an open source application that utilizes these principles that is relatively small that is not a framework. Something that I can go through every single class, and spend time understanding the insides and outs of how the program was developed. Thanks so much in advance! I really really really really appreciate it! Well it looks like we aren't supposed to ask about best books, so nevermind this question! Sorry about that!

  Read the article

• Which is a better practice - helper methods as instance or static?

  - by Ilian Pinzon

  This question is subjective but I was just curious how most programmers approach this. The sample below is in pseudo-C# but this should apply to Java, C++, and other OOP languages as well. Anyway, when writing helper methods in my classes, I tend to declare them as static and just pass the fields if the helper method needs them. For example, given the code below, I prefer to use Method Call #2. class Foo { Bar _bar; public void DoSomethingWithBar() { // Method Call #1. DoSomethingWithBarImpl(); // Method Call #2. DoSomethingWithBarImpl(_bar); } private void DoSomethingWithBarImpl() { _bar.DoSomething(); } private static void DoSomethingWithBarImpl(Bar bar) { bar.DoSomething(); } } My reason for doing this is that it makes it clear (to my eyes at least) that the helper method has a possible side-effect on other objects - even without reading its implementation. I find that I can quickly grok methods that use this practice and thus help me in debugging things. Which do you prefer to do in your own code and what are your reasons for doing so?

  Read the article

• Using PDO with MVC

  - by mister martin

  I asked this question at stackoverflow and received no response (closed as duplicate with no answer). I'm experimenting with OOP and I have the following basic MVC layout: class Model { // do database stuff } class View { public function load($filename, $data = array()) { if(!empty($data)) { extract($data); } require_once('views/header.php'); require_once("views/$filename"); require_once('views/footer.php'); } } class Controller { public $model; public $view; function __construct() { $this->model = new Model(); $this->view = new View(); // determine what page we're on $page = isset($_GET['view']) ? $_GET['view'] : 'home'; $this->display($page); } public function display($page) { switch($page) { case 'home': $this->view->load('home.php'); break; } } } These classes are brought together in my setup file: // start session session_start(); require_once('Model.php'); require_once('View.php'); require_once('Controller.php'); new Controller(); Now where do I place my database connection code and how do I pass the connection onto the model? try { $db = new PDO('mysql:host='.DB_HOST.';dbname='.DB_DATABASE.'', DB_USERNAME, DB_PASSWORD); $db->setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION); } catch(PDOException $err) { die($err->getMessage()); } I've read about Dependency Injection, factories and miscellaneous other design patterns talking about keeping SQL out of the model, but it's all over my head using abstract examples. Can someone please just show me a straight-forward practical example?

  Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >