Search Results

Search found 12089 results on 484 pages for 'rule of three'.

Page 52/484 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

• D-LINK 2450U DSL router: Port forwarding forwading to the modem itself, not the specified IP

  - by axk

  I found a similar question but it has no satisfactory answers. I have a D-LINK 2540U DSL router. It has a basic port forwarding(under DNS - Virtual Servers) configuration in the administration panel where you specify: external port range, protocol, internal port range, server IP address and it is supposed to forward that port to that IP address. When I first set it up for a Real VNC connection it worked fine, just as I expected. Then I added a DynDNS configuration entry in the router's 'Dynamic DNS' section and added an additional SSH (22) forwarding rule. The SSH forwarding also worked fine (now with the dynamic hostname, but I suppose it doesn't make any difference as far as SSH is concerned). Then I removed the SSH rule and after that the VNC forwarding stopped working with the VNC client failing to connect (I have tried to connect with telnet and it also failed to connect, so it wasn't a VNC problem). After adding a rule for port 80 it turned out it would forward on port 80 though not to the specified server IP but to the modem itself. At least it is what it looks like, because it gives me the administration panel when I connect to my external IP (both using a browser and plain telnet in which case I can see that it is mini_hhtpd sitting on the port, which is obviously the modem's administration panel). Have anybody encountered a similar problem with port forwarding? I have tried to do a reset through the administration panel and to restore a backup of the settings made before I started playing with port forwarding, but it didn't help. Should I do a 'hard' reset with the button on the modem? Is it any different from the administration panel's reset (Restore default)?

  Read the article

• Blocking requests from specific IPs using IIS Rewrite module

  - by Thomas Levesque

  I'm trying to block a range of IP that is sending tons of spam to my blog. I can't use the solution described here because it's a shared hosting and I can't change anything to the server configuration. I only have access to a few options in Remote IIS. I see that the URL Rewrite module has an option to block requests, so I tried to use it. My rule is as follows in web.config: <rule name="BlockSpam" enabled="true" stopProcessing="true"> <match url=".*" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{REMOTE_ADDR}" pattern="10\.0\.146\.23[0-9]" ignoreCase="false" /> </conditions> <action type="CustomResponse" statusCode="403" /> </rule> Unfortunately, if I put it at the end of the rewrite rules, it doesn't seem to block anything... and if I put it at the start of the list, it blocks everything! It looks like the condition isn't taken into account. In the UI, the stopProcessing option is not visible and is true by default. Changing it to false in web.config doesn't seem to have any effect. I'm not sure what to do now... any ideas?

  Read the article

• IIS 7 rewriting subdomain to point at a specific port

  - by Tommy Jakobsen

  Having installed Team Foundation Server 2010 on Windows Server 2008, I need an easy URL for our developers to access their repositories. The default URL for the TFS repositories is http://localhost:8080/tfs Now I want the subdomain domain tfs.server.domain.com to point at http://localhost:8080/tfs. And when you access tfs.server.domain.com/repos_name it should redirect to http://localhost:8080/tfs/repos_name. How can I do this in IIS7? I already tried using the following rule, but it does not work. I get a 404. <rewrite> <globalRules> <rule name="TFS" stopProcessing="true"> <match url="^(?:tfs/)?(.*)" /> <conditions> <add input="{HTTP_HOST}" pattern="^tfs.server.domain.com$" /> </conditions> <action type="Rewrite" url="http://localhost:8080/tfs/{R:1}" /> </rule> </globalRules> </rewrite> EDIT I actually got this working by adding a binding for the site on port 80 with host name tfs.server.domain.com. But using tfs.server.domain.com, I can't authenticate using Windows Authentication. Is there something that I need to configure for Windows Authentication? You can see a trace here: http://pastebin.com/k0QrnL0m

  Read the article

• Add Route for machine in same DC

  - by gary

  My routing table on my machine with IP of 46.84.121.243 currently looks like this - Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 46.84.121.225 46.84.121.243 21 46.84.121.224 255.255.255.224 On-link 46.84.121.243 276 46.84.121.239 255.255.255.255 On-link 46.84.121.243 21 46.84.121.243 255.255.255.255 On-link 46.84.121.243 276 46.84.121.255 255.255.255.255 On-link 46.84.121.243 276 I'm trying to access 46.84.121.239, which is my other machine in the same DC but my guess is the first rule is blocking it as it is trying to go via the gateway and failing - Tracing route to [46.84.121.239] over a maximum of 30 hops: 1 OWNEROR-9O83HBL [46.84.121.243] reports: Destination host unreachable. Trace complete. I'm doing all this via RDP and already tried changing the metric on the persistent rule with devastating consequences! Here's the persistent rule (working) - Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 46.84.121.225 1 Any help to be able to access the 46.84.121.243 would be very helpful thanks very much.

  Read the article

• How do I troubleshoot a slow hard drive?

  - by Bruce Connor

  My computer is suffering of slow-downs and I'm not surprised (it's around 6 years old). Here's what I've verified: They are not very frequent (only a couple of times a day). When they happen a single application will hang for 10-60 seconds, while the rest don't hang but also get slow. Even as it is happening, the CPU usage stays low. It happens to applications (such as text editor, firefox, skype). It never happens to some applications (such as games) which I use for hours under heavy CPU load. Also of note: The Graphics card and PSU are new (around a year). Though I have a decent amount of software installed right now, this was happening even right after I reinstalled Windows. This HDD has been through many partinioning schemes, and a few heavy operations (such as moving around 200GB of data). Because of the above, I am already 70% sure the problem is with the hard drive. Before I replace it, however, I want to rule out other less likely possibilities (such as RAM, software, or PSU). I don't have the money to replace the entire box right now, but I can easily replace one of the components. I've read several questions (such as this one) which give general guidance on troubleshooting an unknown issue, that is not what I'm looking for here. My main question is: What tests or benchmarks can I run to verify I have a problematic hard drive? I don't need to solve this problem, I am content with just making sure it's the hard drive. I could borrow a newer hard drive from a friend and see if it gets better. A positive result would rule out all other components, but it wouldn't rule out a software issue (since this new hard drive won't have any of the software I use daily). Running on Windows/Linux.

  Read the article

• iptables: allowing incoming for 192.168.1.0/24 allowed incoming for all?

  - by nortally

  The internal side of my ISP router has three devices: ISP router 128.128.43.1 Firewall router 128.128.43.2 Server 128.128.43.3 Behind the Firewall router is a NAT network using 192.168.100.n/24 This question is regarding iptables running on the Server. I wanted to allow access to port 8080 only from the NAT clients behind the Firewall router, so I used this rule -A Firewall-1-INPUT -s 192.168.100.0/24 -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT This worked, but UNEXPECTEDLY ALLOWED GLOBAL ACCESS, which resulted in our JBOSS server getting compromised. I now know that the correct rule is to use the Firewall router's address instead of the internal network, but can anyone explain why the first rule allowed global access? I would have expected it to just fail. Full config, mostly lifted from a RedHat server: *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :Firewall-1-INPUT - [0:0] -A INPUT -j Firewall-1-INPUT -A FORWARD -j Firewall-1-INPUT -A Firewall-1-INPUT -i lo -j ACCEPT -A Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A Firewall-1-INPUT -m comment --comment "allow ssh from all" -A Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A Firewall-1-INPUT -m comment --comment "allow https from all" -A Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A Firewall-1-INPUT -m comment --comment "allow JBOSS from Firewall" ### THIS RESULTED IN GLOBAL ACCESS TO PORT 8080 ### -A Firewall-1-INPUT -s 192.168.100.0/24 -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT ### THIS WORKED -A Firewall-1-INPUT -s 128.128.43.2 -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPt ### -A Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT

  Read the article

• mod_rewrite REQUEST_FILENAME doesn't contain absolute path

  - by Paul Dixon

  I have a problem with a file test operation in a mod_rewrite RewriteCond entry which is testing whether %{REQUEST_FILENAME} exists. It seems that rather than %{REQUEST_FILENAME} being an absolute path, I'm getting a path which is rooted at the DocumentRoot instead. Configuration I have this inside a <VirtualHost> block in my apache 2.2.9 configuration: RewriteEngine on RewriteLog /tmp/rewrite.log RewriteLogLevel 5 #push virtually everything through our dispatcher script RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^/([^/]*)/?([^/]*) /dispatch.php?_c=$1&_m=$2 [qsa,L] Diagnostics attempted That rule is a common enough idiom for routing requests for non-existent files or directories through a script. Trouble is, it's firing even if a file does exist. If I remove the rule, I can request normal files just fine. But with the rule in place, these requests get directed to dispatch.php Rewrite log trace Here's what I see in the rewrite.log init rewrite engine with requested uri /test.txt applying pattern '^/([^/]*)/?([^/]*)' to uri '/test.txt' RewriteCond: input='/test.txt' pattern='!-f' => matched RewriteCond: input='/test.txt' pattern='!-d' => matched rewrite '/test.txt' -> '/dispatch.php?_c=test.txt&_m=' split uri=/dispatch.php?_c=test.txt&_m= -> uri=/dispatch.php, args=_c=test.txt&_m= local path result: /dispatch.php prefixed with document_root to /path/to/my/public_html/dispatch.php go-ahead with /path/to/my/public_html/dispatch.php [OK] So, it looks to me like the REQUEST_FILENAME is being presented as a path from the document root, rather than the file system root, which is presumably why the file test operator fails. Any pointers for resolving this gratefully received...

  Read the article

• Iptables Forwarding problem

  - by ankit

  Hi all, I had initally asked question about sertting up my linux box for natting for my home network and was given suggestions in the thread here. Did not want to clutter the old question so starting a new one here. based on the earlier suggestions, i have come up with the following rules ... :PREROUTING ACCEPT [1:48] :OUTPUT ACCEPT [12:860] :POSTROUTING ACCEPT [3:228] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT *filter :INPUT DROP [3:228] :FORWARD DROP [0:0] :OUTPUT DROP [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p icmp -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -i eth1 -p icmp -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 443 -j ACCEPT -A OUTPUT -p icmp -j ACCEPT -A OUTPUT -j ACCEPT COMMIT If you notice, i do have the proper MASQURADING rule and the proper FORWARD filter rule as well. However i am facing 2 problems On the linux box itself DNS resolving is not working the lan clients connected to the linux box, are still not able to get to internet. when i ping something from them, i see the DROP count in iptables INPUT rule increasing. now my question is, when i am pinging something from the lan client, how come it is being matched by the input chain ?! should it be in the forward chain ? Chain INPUT (policy DROP 20 packets, 2314 bytes) pkts bytes target prot opt in out source destination 99 9891 ACCEPT all -- lo any anywhere anywhere 0 0 ACCEPT icmp -- eth0 any anywhere anywhere 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:http 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:https 122 9092 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:ssh Thanks ankit

  Read the article

• Local DNS and Apache Server Configuration Interferring - example.com / www.example.com

  - by nicorellius

  I have a domain for my site: example.com I am also running local DNS with these lines: www IN CNAME server.<host_provider>.com. dev IN CNAME server.<host_provider>.com. So www.example.com and dev.example.com go to production and development sites, respectively, that are hosted by a host company. In my Apache configuration for the main site, I'm running a rewrite rule like this: RewriteEngine ON RewriteCond %{HTTP_HOST} ^example\.com$|!dev\.example\.com$ [NC] RewriteRule ^(.*)$ http://www\.%{HTTP_HOST}/$1 [R=302,L,NE] This rule seems to work, as when you are off the network and go to example.com in the browser, you get redirected to www.example.com. The problem is when I'm on the network, and I go to example.com I get an error page, saying page can't be found. No server errors; just a page can't be found, as if the local DNS is causing it to stop looking at that point. I'm also using Nettica for DNS service and have this A record in place: example.com Host (A) Default xxx.xx.xxx.xx This handles the external DNS, but my problem seems to be related to my internal DNS. For example, inside my network, I can go to servers on the network with addresses like this: server.example.com server1.example.com server2.example.com These are configured in my local DNS. I'm just not sure how to get past the "empty" subdomain and go to example.com. Adding to this since it might not be clear. If I'm out side the example.com network, on another network, like example123.com, then when I go to example.com I'm redirected to www.example.com as expected, eg, the Apache rewrite rule is working. Thanks in advance for any information.

  Read the article

• I have added a port to the public zone in firewalld but still can't access the port

  - by mikemaccana

  I've been using iptables for a long time, but have never used firewalld until recently. I have enabled port 3000 TCP via firewalld with the following command: # firewall-cmd --zone=public --add-port=3000/tcp --permanent However I can't access the server on port 3000. From an external box: telnet 178.62.16.244 3000 Trying 178.62.16.244... telnet: connect to address 178.62.16.244: Connection refused There are no routing issues: I have a separate rule for a port forward from port 80 to port 8000 which works fine externally. My app is definitely listening on the port too: Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:3000 0.0.0.0:* LISTEN 99 36797 18662/node firewall-cmd doesn't seem to show the port either - see how ports is empty. You can see the forward rule I mentioned earlier. # firewall-cmd --list-all public (default, active) interfaces: eth0 sources: services: dhcpv6-client ssh ports: masquerade: no forward-ports: port=80:proto=tcp:toport=8000:toaddr= icmp-blocks: rich rules: However I can see the rule in the XML config file: # cat /etc/firewalld/zones/public.xml <?xml version="1.0" encoding="utf-8"?> <zone> <short>Public</short> <description>For use in public areas. You do not trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.</description> <service name="dhcpv6-client"/> <service name="ssh"/> <port protocol="tcp" port="3000"/> <forward-port to-port="8000" protocol="tcp" port="80"/> </zone> What else do I need to do to allow access to my app on port 3000? Also: is adding access via a port the correct thing to do? Or should I make a firewalld 'service' for my app instead?

  Read the article

• IIS 7 rewriting subdomain to point at a specific port.

  - by Tommy Jakobsen

  Having installed Team Foundation Server 2010 on Windows Server 2008, I need an easy URL for our developers to access their repositories. The default URL for the TFS repositories is http://localhost:8080/tfs Now I want the subdomain domain tfs.server.domain.com to point at http://localhost:8080/tfs. And when you write access tfs.server.domain.com/repos_name it should redirect to http://localhost:8080/tfs/repos_name. How can I do this in IIS 7? I already tried using the following rule, but it does not work. I get a 404. <rewrite> <globalRules> <rule name="TFS" stopProcessing="true"> <match url="^(?:tfs/)(.*)" /> <conditions> <add input="{HTTP_HOST}" pattern="^tfs.server.domain.com$" /> </conditions> <action type="Rewrite" url="http://localhost:8080/tfs/{R:1}" /> </rule> </globalRules> </rewrite>

  Read the article

• Vyatta internet connection + hosted site on same IP

  - by boburob

  Having a small issue setting up a vyatta. The company internet and two different websites are both on the same IP. Server 1 - Has websites hosted on ports 1000 and 3000 and also has a proxy server installed to provide internet connection to the domain Server 2 - Has a website hosted on ports 80 and 433 The vyatta is correctly natting the appropriate traffic to each server, and allowing the proxy to get internet traffic, however I have a problem getting to the websites hosted on these two servers inside the domain. I believe the problem is that the HTTP request is being sent with an IP, eg: 12.34.56.78. The request will reach the website and the server will attempt to send the request back to the IP, however this is the IP of the Vyatta, so it has nowhere else to go. I thought the solution would be something like this: rule 50 { destination { address 12.34.56.78 port 1000 } inbound-interface eth1 inside-address { address 10.19.2.3 } protocol tcp type destination } But this doesnt seem to do it! UPDATE I changed the rules to the following: rule 50 { destination { address 12.34.56.78 port 443 } outbound-interface eth1 protocol tcp source { address 10.19.2.3 } type masquerade } rule 51 { destination { address 12.34.56.78 port 443 } inbound-interface eth1 inside-address { address 10.19.2.2 } protocol tcp type destination } I am now seeing traffic going between the two with Wireshark, but the website will still fail to load.

  Read the article

• port forwarding problem

  - by Claudiu

  I want to set up an svn server on my computer, so it's available from anywhere. I think I set up the repository correctly, using CollabSVN. If I go to Repo-Browser with TortoiseSVN and point it to svn://localhost:3690, it shows the proper repository. The problem now is that I'm behind a router. My local IP is 192.168.1.45 . Doing svn://192.168.1.45:3690 also works. My global IP is, say, x.x.x.x. Just doing svn://x.x.x.x:3690 doesn't work, which makes sense, since I have to set up port forwarding. I'm using a Verizon router. Using their web interface (on 192.168.1.1) I added the following port forwarding rule: IP Address forward to: 192.168.1.45 Source Ports: Any Dest Ports: 3690 Forward to: 3690 Protocol: TCP However, even after applying this rule, going to svn://x.x.x.x:3690 doesn't work. It takes a few seconds to fail, then says that the connection couldn't be established because the server connected to didn't respond properly after a period of time. What's interesting is that a random port, like svn://x.x.x.x:36904 fails immediately, saying that the target machine actively refused the connection. So I figure that the forwarding rule did something, but not fully what was necessary. Any ideas on how to get this working? The router model is MI424-WR and the firmware version is 4.0.16.1.56.0.10.12.3. UPDATE: I also tried setting destination port to 45000, and still forwarding to 3690, in case something was wrong w/ the lower-numbered ports, but to no avail. I also tried port 80 to port 3690, still all in vain.

  Read the article

• Manual NAT on Checkpoint (Redirect all http requests to a local web server)

  - by B. Kulakli

  We have a proxy server in our internal network and I want to redirect all internet http requests to a web server in local network. It'll be like a Network Billboard that says "No direct connection is available. Set up your proxy etc." For example: A user starts the computer Opens the browser Tries to open www.google.com Should see web server output on local network Tries another web site on internet Should see web server output on local network Sets up proxy Tries to connect to a web site Web site should be loaded I have added a simple manual NAT rule to address translation in Checkpoint firewall but it simply does not work. Here is my address translation rule Source Destination Service T.Source T.Destination T.Service MY_PC A_GOOGLE_IP ALL ORIGINAL INT_WEB_SRV ORIGINAL Then when I ping A_GOOGLE_IP, replies come from INT_WEB_SRV, as I expected. However, when I try to connect A_GOOGLE_IP from browser (http://A_GOOGLE_IP), no replies come from SYN_SENT and falls into timeout. When I look at the firewall log of INT_WEB_SRV, I can see the incoming connection requests from MY_PC is accepted and NO denies. By the way, there is no problem to see INT_WEB_SRV (http://INT_WEB_SRV) from browser. My understanding is, my NAT rule at checkpoint NGX R60 does not include return packets. I definitely need some help.

  Read the article

• Manual NAT on Checkpoint (Redirect all http requests to a local web server)

  - by kulakli

  Hi, We have a proxy server in internal network and I want to redirect all internet http requests to a web server in local network. It'll be like a Network Billboard that say "No direct connection is available. Set up your proxy etc." For example: A user starts the computer Opens the browser Trys to open www.google.com Should see web server output on local network Trys another web site on internet Should see web server output on local network Sets up proxy Trys to connect to a web site Web site should be loaded I have added a simple manual NAT rule to address translation in Checkpoint firewall but it simply does not work. Here is my address translation rule Source Destination Service T.Source T.Destination T.Service MY_PC A_GOOGLE_IP ALL ORIGINAL INT_WEB_SRV ORIGINAL Then when I ping A_GOOGLE_IP, replies come from INT_WEB_SRV, as I expected. However, when I try to connect A_GOOGLE_IP from browser (http://A_GOOGLE_IP), No replies come from SYN_SENT and falls into timeout. When I look at the firewall log of INT_WEB_SRV, I can see the incoming connection requests from MY_PC is accepted and NO denies. By the way, there is no problem to see INT_WEB_SRV (http://INT_WEB_SRV) from browser. My understanding is, my nat rule at checkpoint NGX R60 does not include return packets. I definitely need some help. Regards, Burak

  Read the article

• Denying access to website via htaccess based on http header

  - by neekster

  I've been trying for ages to get this to work and I can't put my finger on it. What I'm trying to do is block access to a site from a number of countries, based on the CF-IPCountry header added by CloudFlare. I figured htaccess was a suitable way to do this. We are running LiteSpeed 4.2.4 on top of DirectAdmin for a control panel. The problem we having is the htaccess rule doesn't seem to do anything. Here's the rule we tried: SetEnvIf CF-IPCountry AU UnwantedCountry=1 Order allow,deny Deny from env=UnwantedCountry Allow from all That makes no difference at all, connections are still accepted. Just to check that the rule was at least being processed, I changed Allow from all to Deny from all, and connections were refused. So it appears to be a problem wit the variable. Here's the relevant headers that come in with the request. Connection: Keep-Alive Accept-Encoding: gzip CF-Connecting-IP: xx.xx.xx.xx CF-IPCountry: AU X-Forwarded-For: xx.xx.xx.xx.xx CF-RAY: c9062956e2d04b6 X-Forwarded-Proto: http CF-Visitor: {"scheme":"http"} Zone-Name: xx.com.au Hopefully someone can help me out, this has been driving me nuts for too long. Thanks

  Read the article

• squid bypass for a domain

  - by krisdigitx

  i am using squid with adzap, it possible that squid/adzap does not cache for a particluar domain eg. cnn.com this is my squid.conf file # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 #acl localhost src ::1/128 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 #acl to_localhost dst ::1/128 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 192.168.1.0/24 acl localnet src 192.168.2.0/24 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port xxx.xxx.xxx.yyy:3128 transparent visible_hostname proxyserver.local # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. cache_dir ufs /var/spool/squid 1024 16 256 # Leave coredumps in the first cache dir coredump_dir /var/spool/squid # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 access_log /var/log/squid/squid.log squid access_log syslog squid redirect_program /usr/local/adzap/scripts/wrapzap fixed using acl allow_domains dstdomain www.cnn.com always_direct allow allow_domains

  Read the article

• How to simulate Apache [END] flag on a redirect?

  - by Javier Méndez

  For business-specific reasons I created the following rewrite rule for Apache 2.2.22 (mod_rewrite): RewriteRule /site/(\d+)/([^/]+)\.html /site/$2/$1 [R=301,L] Which if given an URL like: http://www.mydomain.com/site/0999/document.html Is translated to: http://www.mydomain.com/site/document/0999.html That's the expected scenario. However, there are documents which name are only numbers. So consider the following case: http://www.mydomain.com/site/0055/0666.html Gets translated to: http://www.mydomain.com/site/0666/0055.html Which also matches my rewrite rule pattern, so I end up with "The web page resulted in too many redirects" errors from browsers. I have researched for a long time, and haven't found "good" solutions. Things I tried: Use the [END] flag. Unfortunately is not available on my Apache version nor it works with redirects. Use %{ENV:REDIRECT_STATUS} on a RewriteCond clause to end the rewrite process (L). For some reason %{ENV:REDIRECT_STATUS} is empty all the times I tried. Add a response header with the Header clause if my rule matches and then check for that header (see: here for details). Seems that a) REDIRECT_addHeader is empty b) headers are can't be set on the 301 response explicitly. There is another alternative. I could set a query parameter to the redirect URL which indicates it comes from a redirect, but I don't like that solution as it seems to hacky. Is there a way to do exactly what the [END] flag does but in older Apache versions? Such as mine 2.2.22. Thanks!

  Read the article

• In Outlook 2007 Rules and Alerts, EXACTLY what does "my name" mean?

  - by Cornan The Iowan

  I can't find any definition of "my name" in the Outlook 2007 Rules and Alerts or on the Internet. In this case our email system presents two email addresses for me to the outside world. I'd like BOTH of these addresses to be recognized as being "me". I thought that perhaps if I understood the definition of "my name" in the rules, I could set up my mailbox(es) appropriately. Of course if "my name" actually means a single email address, then I won't be able to do so, but if it means "any email on my account" or "any account meeting [some criteria]", then I might be successful. I'd like to note a subtlety in the rules definitions. While there is a rule named "where my name is in the To or Cc box", the only rule for explicit addresses is "sent to people or distribution list" (I'm assuming that "sent to" means "in the To:" list rather than "in the To: or cc: lists"). Summing up. My preference: 1) Understanding the precise definition of "my name" so that I can use "where my name is in the To or Cc box" to capture both email addresses from my account. 2) Learning the "sent to people or distribution list" actually includes Cc: entries (I can test this myself of course) 3) Any other solution that will let me define a rule where my secondary email address will be detected in EITHER the To: or Cc: boxes.

  Read the article

• iptables: How to combine DNAT and SNAT to use a secondary IP address?

  - by Que_273

  There are lots of questions on here about iptables DNAT/SNAT setups but I haven't found one that solves my current problem. I have services bound to the IP address of eth0 (e.g. 192.168.0.20) and I also have a IP address on eth0:0 (192.168.0.40) which is shared with another server. Only one server is active, so this alias interface comes and goes depending on which server is active. In order to get traffic accepted by the service a DNAT rule is used to change the destination IP. iptables -t nat -A PREROUTING -d 192.168.0.40 -p udp --dport 7100 -j DNAT --to-destination 192.168.0.20 I also wish all outbound traffic from this service to appear to come from the shared IP, so that return responses will work in the event of a active-standby failover. iptables -t nat -A POSTROUTING -p udp --sport 7100 -j SNAT --to-source 192.168.0.40 My problem is that the SNAT rule is not always run. Inbound traffic causes a connection tracking entry like this. [root]# conntrack -L -p udp udp 17 170 src=192.168.0.185 dst=192.168.0.40 sport=7100 dport=7100 src=192.168.0.20 dst=192.168.0.185 sport=7100 dport=7100 [ASSURED] mark=0 secmark=0 use=2 which means the POSTROUTING chain is not run and outbound traffic leaves with the real IP address as the source. I am thinking I can set up a NOTRACK rule in the raw table to prevent conntracking for this port number, but is there a better or more efficient way to make this work? Edit - Alternative question: Is there a way (in CentOS/Linux) to have an interface that can be bound to but not used, such that it can be attached to the network or detached when a shared IP address is swapped between servers?

  Read the article

• How to modify a message, so it will be for 100% recognizable as spam by Exchange junk e-mail filter

  - by user71061

  Hi! I have an sendmail server, sitting in front of my Exchange server. This server filter spam with SpamAssassin (and do it incredibly well!), but it merely tag spam messages with appropriate header flags and by modifying message subject. When such a message arrives to user mailbox on Exchange server, where it is examined by Echange/Outlook junk e-mail filter, which put most of spam in junk message folder. And that is my problem: most, but not all! To put all spam in junk e-mail message folder, user has to define an rule, saying f.e: "If header contains text 'X-Spam-Flag: YES' then move it to 'Junk e-mail messages' folder". Fine, but it has to be done on every user (for some users, this task is too "complicated" to made it themselves :-) . So I want to know, how could I modify message header in such a way, that Exchange junk e-mail filter will for 100% recognize this message as a spam, freeing user from task of defining his own rule. Some solution could be defining such a rule by using AD and group policy, but I wan't to avoid this due to many possible caveats: there are so many combination of different operating system and different Outlook versions, and to be honest, I doubt if it is even possible.

  Read the article

• cisco asa + action drop issue

  - by ghp

  Have created a tunnel between 10.x.y.z network and 122.a.b.c ..the tunnel is up and active, but when I try the packet tracer output ..I get the ACTION as drop. I have also enabled same-security-traffic permit intra-interface. Can someone help me what does this drop mean? Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: drop Drop-reason: (acl-drop) Flow is denied by configured rule Packet Tracer output @Shane Madden: please find below the packet tracer output. CASA5K-A# CASA5K-A# config t CASA5K-A(config)# packet-tracer input inside tcp 10.x.y.112 0 122.a.b.c 0 Phase: 1 Type: ROUTE-LOOKUP Subtype: input Result: ALLOW Config: Additional Information: in 0.0.0.0 0.0.0.0 outside Phase: 2 Type: ACCESS-LIST Subtype: Result: DROP Config: Implicit Rule Additional Information: Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: drop Drop-reason: (acl-drop) Flow is denied by configured rule CASA5K-A(config)# ======================================================================== The access-group are as follows : access-group acl-inbound in interface outside access-group acl-outbound in interface inside and the access-list's are access-list acl-inbound extended permit tcp any any gt 1023 access-list acl-outbound extended permit ip object-group net-Source object net-dest

  Read the article

• Audit file removal (auditctl)

  - by user1513039

  For some reason, some script or program is removing a pid file for the service on the linux server (centos5.4 / 2.6.18-308.4.1.el5xen). I suspect a faulty cron script, but manual investigation did not lead me to it. And i still want to track it down. Have been using auditctl rule: auditctl -w /var/run/some_service.pid -p w Which helped me to see something, but not quite exactly what i wanted: type=PATH msg=audit(11/12/2013 09:07:43.199:432577) : item=1 name=/var/run/some_service.pid inode=12419227 dev=fd:00 mode=file,644 ouid=root ogid=root rdev=00:00 type=SYSCALL msg=audit(11/12/2013 09:07:43.199:432577) : arch=x86_64 syscall=unlink success=yes exit=0 a0=7fff7dd46dd0 a1=1 a2=2 a3=127feb90 items=2 ppid=3454 pid=6227 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=pts0 ses=38138 comm=rm exe=/bin/rm key=(null) Problem here is that i see ppid of the script that removed the file, but at the analysis time the (p)pids are already invalid as probably scripts/programs have been shutdown. Imagine a cron script deleting the file. So i need some way to expand/add audit rule(s) to be able to trace the parents of the /bin/rm at the time of removal. I have been thinking to add some rule to monitor all process creation, something like: auditctl -a task,always But this happen to be very resource intensive. So i need help or advice how to combine these rules, or how to expand any of the rules to help track the script/program. Thanks.

  Read the article

• Parsing a file in C

  - by sfactor

  I need parse through a file and do some processing into it. The file is a text file and the data is a variable length data of the form "PP1004181350D001002003..........". So there will be timestamps if there is PP so 1004181350 is 2010-04-08 13:50. The ones where there are D are the data points that are three separate data each three digits long, so D001002003 has three coordonates of 001, 002 and 003. Now I need to parse this data from a file for which I need to store each timestamp into a array and the corresponding datas into arrays that has as many rows as the number of data and three rows for each co-ordinate. The end array might be like TimeStamp[1] = "135000", low[1] = "001", medium[1] = "002", high[1] = "003" TimeStamp[2] = "135015", low[2] = "010", medium[2] = "012", high[2] = "013" TimeStamp[3] = "135030", low[3] = "051", medium[3] = "052", high[3] = "043" .... The question is how do I go about doing this in C? How do I go through this string looking for these patterns? Note: Here the seconds value in timestamp is added on our own as it is known at each data comes after 15 seconds.

  Read the article

• Visual Studio Debugging is not attaching to WebDev.WebServer.EXE

  - by Aaron Daniels

  I have a solution with many projects. On Debug, I have three web projects that I want to start up on their own Cassini ASP.NET Web Development servers. In the Solution Properties - Common Properties - Startup Project, I have Multiple startup projects chosen with the three web applications' Action set to Start. All three web development servers start, and all three web pages load. However, Visual Studio is only attaching to two of the WebDev.WebServer.EXE processes. I have to manually go attach to the third process in order to debug it with the debugger. This behavior just started happening, and I'm at a loss as to how to troubleshoot this. Any help is appreciated. EDIT: Also to note, I have stopped and restarted the development servers several times with no change in behavior. Also, when attaching to the process manually, I see that the Type property of the two automatically attached WebDev.WebServer.EXE processes is Managed, while the Type property of the unattached WebDev.WebServer.EXE process is TSQL, Managed, x86. When looking at the project's properties, however, I am targeting AnyCPU, and do NOT have SQL Server debugging enabled. EDIT: Also to note, the two projects that attach correctly are C# web applications. <ProjectTypeGuids>{349c5851-65df-11da-9384-00065b846f21};{fae04ec0-301f-11d3-bf4b-00c04f79efbc}</ProjectTypeGuids> The project that is not attaching correctly is a VB.NET web application. <ProjectTypeGuids>{349c5851-65df-11da-9384-00065b846f21};{F184B08F-C81C-45F6-A57F-5ABD9991F28F}</ProjectTypeGuids> EDIT: Also to note, the behavior is the same on another workstation. So odds are that it's not a machine specific problem.

  Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >