Search Results

Search found 61369 results on 2455 pages for 'simulation help'.

Page 52/2455 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

• Need Help Scoping a Server to use for study (MCITP Ent Admin + SharePoint 2010)

  - by AVFamily76

  i need to study for mcitp, but i also need to study for sharepoint 2010 i have a poweredge 1850 with two single-core CPUs + two 73G drives - it kills me on electricity, so don't want to use it, and it won't do VT, but it could be one of three boxes for a lab that's cheap, but will cost a lot on electricity i was thinking . . . OPTION #1 Opteron 4170 HE (50 watt chip), 6-core, only two-bills ($200), but the board's are $250, so that's an $800 box, then get another box to dual-boot Win7/Hyper-V on the cheap...? OPTION #2 Used Quad - but how many VM's that are really banging away could it run at same time? (Server 2008r2, SQL 2008r2, Search Server) OPTION #3 Study from books and just get one box that can run two VM's at same time, even if slowly. the last time i had and used a home lab was five years ago when i had a DC, SQL, Exchange and business app box, that's where i got my server skills was just banging on it for four years, but didn't read any books, so now i have to get certified and know the material, and just am not sure how much attention i should pay to the box i use versus the studying time and reading. sorry it's a subjective question, and am obviously open to all sorts of abuse here, but hope you can tell me also how many VM's i can run at the same time given what they'll be doing (SQL and SharePoint FAST search server are resource hungry) thanks!

  Read the article

• Capturing stdout from an imported module in wxpython and sending it to a textctrl, without blocking the GUI

  - by splafe

  There are alot of very similar questions to this but I can't find one that applies specifically to what I'm trying to do. I have a simulation (written in SimPy) that I'm writing a GUI for, the main output of the simulation is text - to the console from 'print' statements. Now, I thought the simplest way would be to create a seperate module GUI.py, and import my simulation program into it: import osi_model I want all the print statements to be captured by the GUI and appear inside a Textctrl, which there's countless examples of on here, along these lines: class MyFrame(wx.Frame): def __init__(self, *args, **kwds): <general frame initialisation stuff..> redir=RedirectText(self.txtCtrl_1) sys.stdout=redir class RedirectText: def __init__(self,aWxTextCtrl): self.out=aWxTextCtrl def write(self,string): self.out.WriteText(string) I am also starting my simulation from a 'Go' button: def go_btn_click(self, event): print 'GO' self.RT = threading.Thread(target=osi_model.RunThis()) self.RT.start() This all works fine, and the output from the simulation module is captured by the TextCtrl, except the GUI locks up and becomes unresponsive - I still need it to be accessible (at the very minimum to have a 'Stop' button). I'm not sure if this is a botched attempt at creating a new thread that I've done here, but I assume a new thread will be needed at some stage in this process. People suggest using wx.CallAfter, but I'm not sure how to go about this considering the imported module doesn't know about wx, and also I can't realistically go through the entire simulation architecture and change all the print statements to wx.CallAfter, and any attempt to capture the shell from inside the imported simulation program leads to the program crashing. Does anybody have any ideas about how I can best achieve this? So all I really need is for all console text to be captured by a TextCtrl while the GUI remains responsive, and all text is solely coming from an imported module. (Also, secondary question regarding a Stop button - is it bad form to just kill the simulation thread?). Thanks, Duncan

  Read the article

• Help with restoring expired domain as quick as possible

  - by Pasta

  My domain name expired today (owing to missing credit card info, etc) and it is really important as the company has about 50 users who cannot access emails, website unreachable, etc. I have requested UKReg to bring the domains backup and running but they will take about 24 hours to get it back up and running. Is there anything that I can do to return the service back to normal quicker?

  Read the article

• Help with routing table

  - by user68752

  I have tried to find the answer to my question but not really found a clean and easy solution. I have a box (Ubuntu headless 10.04.1 server, with one Ethernet port) on LAN behind a router (running m0n0wall), that I have successfully installed a PPTP device (ppp0) on, this is working flawlessly (following this link) The thing is I want this box to route all it's internet traffic through the VPN tunnel (ppp0 device) but also being able to access the local LAN on 192.168.1.* subnet. I've succeeded a bit with this, but my problem right now is that I have port forwards (e.g. SSH) done in the m0n0wall pointing to this specific box which forces me to do "add routes" to all boxes that want to access this machine through this specific port. For instance a machine with ip xyz.xyz.xyz.xyz needs to have a static route setup in the routing table on the box to be able to access the box. This is the result of route -n xxx.xxx.137.2 192.168.1.1 255.255.255.255 UGH 0 0 0 eth0 xxx.xxx.137.2 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 yyy.yyy.0.0 192.168.1.1 255.255.0.0 UG 0 0 0 eth0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 Where xxx is the IPs provided from VPN server. yyy.yyy.0.0 is a net that i want to have access to the box, without this I can't access the box from outside the LAN (via port-forwards done in router software, m0n0wall) is there away round this ugly solution?

  Read the article

• Need help toubleshooting PC

  - by brux

  I have had problems since my dog pee'd on my computer. Problem: loads windows fine, at random intervals from 5 minutes to 30 minutes it restarts itself. There is nothing in the event log such as errors, no BSOD, just cold restart. after restarting - sometimes- it POST's and restarts itself at the end of POST. It will do this many times and then finally load windows. The cycle then begins again, it will restart eventually. What I have done: I thought it was HDD at first, since this is the only part of the computer which actually got wet with any fluid ( the case is off the PC and the dog pee'd down the front where the HDD is located). Seatool, the seagate HDD tool, found errors when I ran it inside windows, so I ran it in DOS mode from boo-table USB and ran it. It found the same number of errors and fixed them all. I ran the scan again and it says "Good". I loaded windows and ran the scan and it also said "Good there. So the HDD appears to be fine but the problem persists, random restarts. What else could this be? I have taken the computer apart and cleaned everything and also taken the PSU apart and cleaned it thoroughly. The problem still persists, what should my next steps be?

  Read the article

• eAccelerator problems. Please help

  - by Hakzona

  I just recently installed eaccelerator and switched php to dso everything was fine on server Server load was about 1-2 (4 cpus) and after some time server got overloaded (Server load increased to 250) and server stopped. In suphp mode server was overloading by traffic so i decided to switch it to eaccelerator and now i am lost... Can someone explain that?

  Read the article

• VLSM help required

  - by user68062

  I have confused myself following a VLSM tutorial and need to get my understanding confirmed, would this be the correct format, or am i away off again 172.31.0.0 VLSM this network address for as many subnetworks as possible, with no more than 14 hosts in each subnetwork. Show the subnet mask used. As the ip address is class b and contains 16 bits in the network portion, this means that we can have 2^16 = 65536 possible networks, to give each of these networks a maximum of 14 hosts we would use the subnet prefix \28 for each subnet. Is this correct? Thanks BB

  Read the article

• grep only returns help text

  - by Pete Mancini

  Well, I am perplexed. I am working with an Ubuntu server and I type in grep 'bash' *.sh BUT fgrep 'bash' *.sh works like a champ. which grep and which fgrep both point to their respective executables in /bin. I am perplexed as to what I am doing wrong. EXAMPLE output: $ grep -F 'grounding' repl.clj Usage: grep [OPTION]... PATTERN [FILE]... Search for PATTERN in each FILE or standard input. PATTERN is, by default, a basic regular expression (BRE). Example: grep -i 'hello world' menu.h main.c $ fgrep 'grounding' repl.clj (p/concepts-for-grounding-term imp1 "PERSON" "summary") See? grep is failing but fgrep is working fine. That is why I am perplexed.

  Read the article

• Help developing a very simple iPad application

  - by user220755

  I need to develop a very simple iPad application that takes RSS feed of images that will be updated constantly and will display them and you can slide through them. As simple as that. Is there a way to get basic help on doing this, I am very new to iPhone/iPad development and would like help. To make the question clearer, I would appreciate code samples (other than the ones displayed on Apple's developers site, tutorials, and guidelines. Thank you :)

  Read the article

• need help to float a header in a wordpress theme

  - by aadil ennia

  i need help with a wordpress theme, i want to localize a theme but i have some problemes my new blog is in arabic (rtl) and i want to replace the theme logo in the right (float to right) and the banner ad to the left side in the header, also i tried to float the search bar to the left but i did not succeed in that, can you please help me to localize this great theme? ah i forget to tell you the theme name is "Vanillia" http://newwpthemes.com/wordpress-theme/vanillia/ here is a screenshot of what i need to do (http://) i47.tinypic.com/28cg0ax.png

  Read the article

• Cisco NAC: help with enabling FTP or moving update files

  - by kyoung

  Hi, So this is a LINUX question, and a Cisco NAC question. I'm trying to update our server from 4.1 to 4.7, and i need to move some tarball files to the NAC. the NAC Appliance runs some strange stripped down version of Fedora Core 4 copying the upgrade: The instructions say to FTP the file to the NAC appliance, however whenever i use WinSCP with root credentials, i get a notice informing me the connection was actively refused. I can't for the life of me find any .conf files that sound like winners, so I don't know how to change the settings, however the ftp command does seem to work. what exactly should I do here?

  Read the article

• solr Security help

  - by Camran

  I have solr setup with Jetty on my Ubuntu server. On any computer now, I can type my_ip:8983/solr/ and the page will show upp to anybody. How can I disable this so that only I can access that port and the solr admin? Thanks

  Read the article

• Possible HDD malfunction. Need help in diagnosing

  - by Protheus

  Today when using my PC as I did for almost 4 years I experienced the following: during opening new tab in Opera browser screen froze. Music (AIMP 3) continued to play for about 5 minutes and then stopped too. I tried Ctrl+Alt+Del, but win7 lock screen didn't appear. Caps\Scroll or Num locks didn't switch diodes on keyboard. I rebooted my PC and saw that BIOS suggests me to enter it's settings or load by default. I chose default. It don't see proper boot device (old faitful "insert proper boot" something). After second reboot it said that there is no ExpressGate installed (which i turned off in BIOS years ago). I went into BIOS setting to turn off ExpressGate and see configs: time was not set off, all hard drives present, temp and O.C. settings are nominal (no O.C.) I've inserted my Win7 install disk to try recovery. It did load awfully long (about few minutes) and didn't see current installation. PC was utilized in 24/7 mode for almost all these years. Hardware configuration: ASUS P5Q WS Core 2 Quad Q9300 (2.5GHz no O.C.) MSI geForce GTX 460 4x2 Gb GeIL EVO 2 (AFAIR) Seagate something 750Gb (4 years as system HDD 24/7) WD 1Tb (for random stuff, 5 y.o.) Hitachi 500Gb (for even more random stuff, 6 y.o.) NEC DVDRW (ALL DISKS ARE SATA) Cooler Master Silent Pro 700W Software: Windows 7 AND Kubuntu on the same drive with GRUB loader. Sorry I can't remember HDDs and can't see them right now, but I think their models aren't relevant anyway. My idea is that due to some system error or hard drive glitch i've wrecked my primary HDD's MBR. Nevertheless I don't exclude the possibility of other failure. May it's be that motherboard or it's SATA controller? Doubt it, because all drives are seen in BIOS and I could load from DVD. Maybe GRUB got bugged somehow, although I don't see how it's possible from Windows. But I did install KUbuntu from Windows (i wasn't myself then), maybe GRUB did write itself in some windows partition and got rewriteen in process? Right now I am at work with my flash drive with me and I need some advice how to fix MBR or to hear if it's not MBR. I'm going to buy new HDD (Hitachi 7k2000) because I think that my current HDD is compromised and it's unsafe to use it as system drive, especially 24/7.

  Read the article

• Help w/ error "Account exceeded bandwidth limits" Thunderbird 3 + Gmail

  - by boo

  Over the past two days I have been receiving the following message on a new computer running Windows 7: Account exceeded bandwidth limits. (Failure) Whenever I try to access my emails through Thunderbird, this is followed by: Login to server imap.gmail.com failed. Credentials are correct as I have access via HTTP. And then it requests me to enter my password (I have also unlocked the captcha on this account, but this didn't stop any error messages) I'm looking for a details on why this is happening, to prevent it from reoccurring, such as whether this is specific to something in Thunderbird 3 or google?

  Read the article

• Please help me get rid of asmonitor.exe

  - by LCD Fire

  It might be silly and I trully apologize if the question is not apropriate here, but I have really tried and got to nowhere. I have a windows xp startup error which indicates something about asmonitor.exe program from the ActualSpy keylogger. I had installed but removed ActualSpy keylogger using Superantispyware or something close. I have searched the registries and found a asmonitor entry deleted. I looked at startup programs and can not find the asmonitor program. In addition, I searched the c: drive using regular explorer search and searched using ESET NOD32 antivirus. In each case I cannot find the application... I have even looked at startup programs using msinfo32 command. msconfig-startup NOTHING! it drives me crazy! I can't get rid of it. it is still showing up at windows startup! Where do I find this little program? where is it located? I don't want it to keep showing up. I don't want programs that can do it.. or maybe free ones. But I prefer manual solutions. aren't are any?

  Read the article

• Need help with remote dekstop - Limit the computers you can access server from

  - by stirredo

  I have a windows server 2003 computer that is accessed by remote desktop connection. To access the server all you need to know is the IP address of the computer. I want to limit the computers that can access the windows server computer to authorized computers only. The authorized computers won't have static IPs, so I cannot limit them on basis of IP address. Can I limit them on basis of MAC id perhaps? I won't mind using third party solution like Teamviewer or Logmein etc. So How can I solve this problem?

  Read the article

• Help w/ error "Account exceeded bandwidth limits" Thunderbird 3 + Gmail

  - by boo

  Over the past two days I have been receiving the following message on a new computer running Windows 7: Account exceeded bandwidth limits. (Failure) Whenever I try to access my emails through Thunderbird, this is followed by: Login to server imap.gmail.com failed. Credentials are correct as I have access via HTTP. And then it requests me to enter my password (I have also unlocked the captcha on this account, but this didn't stop any error messages) I'm looking for a details on why this is happening, to prevent it from reoccurring, such as whether this is specific to something in Thunderbird 3 or google?

  Read the article

• need help scripting website reboot

  - by Adam Morley

  I have a small website that crashes once or twice a week. I have spoken to both the websites original designers, who has now retired and its host and both blame the other. The website can be recovered by simply renaming a .dll file on the server which effectively reboots the website/application. Is there a script or something that can be set to automatically rename a file at specific intervals?

  Read the article

• Visual Studio 2010 Themes, change Parameter Help background color

  - by iCe

  Hi there, Recently I installed in Visual Studio 2010 the Power Tools Extension It's working great, however I have problems with my text coloring theme (Nightfall), and the extension's Colorized Parameter feature. Since the theme text fore color is grey, when the Power Tools Extensions shows the Parameter Help tooltip using my text colors, it gets unreadable: Is there a way to change Parameter Help background color?

  Read the article

• Need help ttoubleshooting PC

  - by brux

  I have had problems since my dog pee'd on my computer. Problem: loads windows fine, at random intervals from 5 minutes to 30 minutes it restarts itself. There is nothing in the event log such as errors, no BSOD, just cold restart. after rstarting - sometimes- it POST's and restarts itself at the end of POST. It will do this many times and then finally load windows. The cycle then begins again, it will restart eventually. What i have done: I thought it was HDD at first, since this is the only part of the coputer which actually got wet with any fluid ( the case is off the PC and the dog pee'd down the front where the HDD is located). Seatool, the seagate HDD tool, found errors when I ran it inside windows, so I ran it in DOS mode from bootable USB and ran it. It found the same number of errors and fixed them all. I ran the scan again and it says "Good". I loaded windows and ran the scan and it also said "Good there. So the HDD apears to be fine but the problem persists, random restarts. What else could this be? I have taken the computer apart and cleaned everything and also taken the PSU apart and cleaned it thoughrouly. The problem still persists, what should my next steps be? Thanks in advance.

  Read the article

• Help updating cron entry using regular expressions

  - by Uday

  hi I am trying to update a cron entry NOT by using crontab -e but by shell commands. For example the cron entry is like this: 10 * * * * /home/localuser/foo.sh -b 1 -h 4 > foo_output.sh 2>&1 No i need edit the command line parameters part ONLY i.e -b 1 -h 4 to something else which will be coming in from the user. First thing would be to write the crontab to a tmp file and then manipulate that temp file. Now, is there an easy way to edit that line using SED or something? The crude way wud be to delete that entire line, write a new line with the entire expression and then load that into the cron. I am not very good with regular expressions. My system supports sed -i so was thinking this could be done in a single line command. Thanks in advance

  Read the article

• Help WIth Upgrading Hard Drive: Should One Purchase Online or at a Store

  - by HollerTrain

  I am buying an internal hard drive. I don't know if I should buy online which would have a warranty but I would have to pay for the shipping of any bad products to manufacturer - or buy at a store where I take back but only 14 days. Just trying to get your thoughts or recommendations...

  Read the article

• Need help with UISearchBar and NSString

  - by guydor

  Hi, I would like to make an if command that checks the value of my UISearchBar in that way if the value of the UISearchBar is equals to " " or multiple spaces without words and chars, an alert will popup. Well, I don't need help with the creation of the alert but I do need help with the if command and the spaces. I know how to do it with multiple "if" command but I want with only 1. Thanks!

  Read the article

• Need help troubleshooting highly variable ping times

  - by Elliot.Bradshaw

  I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

  Read the article

• Need help to figure out iptables rule

  - by Master

  I have this iptable rule listing Chain INPUT (policy DROP) target prot opt source destination ACCEPT tcp -- 127.0.0.1 0.0.0.0/0 tcp dpt:3306 acctboth all -- 0.0.0.0/0 0.0.0.0/0 VZ_INPUT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 ACCEPT tcp -- 94.101.25.40 0.0.0.0/0 state NEW tcp dpt:3306 Chain FORWARD (policy DROP) target prot opt source destination VZ_FORWARD all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy DROP) target prot opt source destination acctboth all -- 0.0.0.0/0 0.0.0.0/0 VZ_OUTPUT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 94.101.25.40 0.0.0.0/0 state NEW tcp dpt:3306 I want only localhost and my ip to access tcp 3306. Can i deleted all other rules as shown above. I don't know if i nned to keep any of them or not

  Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >