simulation help - Page 49

I need help resources for Visual Layout Editor (in ADT Plugin for Eclipse)

- by free-lexx

Hello! There is "Android Layout Editor" (also somewhere mentioned as Visual Layout editor) in ADT Plugin for Eclipse. I didn't found any help docs on how to use it. Please help!

I'm new to Ruby - what tricks can I use to help me find documentation on a object I'm working with? Normally I just do a_var.class or a_var.methods and try to guess what I need or search the web for documentation. Are there other methods or modules that might help?

Read the article

Any good software to help me memorize passwords?

- by Septagram

I'm using KeePass(X) and other tools to keep most of my passwords. However, it turns out, there is still about half a dozen passwords I'm using on regular basis that I would prefer to just remember. So, do you people know of any good programs, preferably open-source, to train yourself using a particular password and thus to memorize it? I know I can remember a 96-bit entropy password rather well if I practice entering it 3 days, 5 minutes for each day, I just want a good software to simplify the process and exclude the possibility of shouldering or otherwise leaking the password.

Read the article

Need Help with wxPython & pyGame

- by Xavier

Hi Guys, I'm actually in need of your help and advice here on my assignment that I am working on. First of all, I was task to do a program that runs langton's ant simulation. For that, I've managed to get the source code (from snippets.dzone.com/posts/show/5143) and edited it accordingly to my requirements. This was done and ran in pygame module extension. In addition, my task requires a GUI to interface for users to run and navigate through the screens effectively with the langton's ant program running. I used wxPython with the help of an IDE called BOA constructor to create the frames, buttons, textboxes, etc. Basically, all the stuff needed in the interfaces. However, I've ran into some problems listed below: Found problem integrating pyGame with wxPython. On this note, I've research the internet for answers and tutorials where I found out from website: wiki.wxpython.org/IntegratingPyGame & aspn.activestate.com/ASPN/Mail/Message/wxpython-users/3178042. I understand from the sites that integrating pyGame with wxPython will be a difficult task where it has caused common problems like the inability to placing other controls into the frames as the pyGame application will cover the entire panel. I really hope that you can clarify my doubts on this and advise me on the path that I should take from here. Therefore, I ask the following questions: Is it feasible to integrate pyGame with wxPython? If it is not feasible to integrate pyGame with wxPython, what other alternatives do I have to create a GUI interface integrating pyGame into it. If so how do I go about? If it is possible to go about integrating pyGame with wxPython, how do I go about doing so? Really need you guys opinion on this.

Read the article

Help needed in installing Snow Leopard on Macbook air

- by Legolas

So. I tried partition my disk using Disk Utility for loading the operating system in the partition drive and installing it. But partition failed, and I could not do that. I tried Remote OSX install from another computer, my MBA crashes with error Hold Power Button to shutdown I dont have a super drive or 8 gigs hard disk. Could someone suggest me some way to install Snow Leopard OSX on my Macbook air ? Thanks !

Read the article

Help imorting video from old Sony Digital Tape handycam

- by thatryan

Friend gave me their OLD handycam and a bunch of tapes asking me to put them on a DVD. The model is Sony DCR-TVR103 and it records onto Hi8 Digital tapes. It has a firewire port also. I am trying to use import function in iMovie on OS X 10.6. Every import though the video is super fast, like playing in fast forward. Ever seen anything like this? How can I import this video? Thank you.

Read the article

regular expression help

- by JPro

I always get confused using regular expressions. Can anyone please suggest me a tutorial? I need help with checking for a string which, cannot contain any wild characters except colon, comma, full stop. It will be better to replace these if found. Any help? Thanks.

Read the article

lacp, cicso 3550, 3560, help with configuration

- by Flamewires

Hey all this is a repost from a question I asked on the cisco forums but never got a useful reply. Hey I'm trying to convert the FreeBSD servers at work to dual-gig lagg links from regular gigabit links. Our production servers are on a 3560. I have a small test environment on a 3550. I have achieved fail-over, but am having troubles achieving the speed increase. All servers are running gig intel (em) cards. The configs for the servers are: BSDServer: #!/bin/sh #bring up both interfaces ifconfig em0 up media 1000baseTX mediaopt full-duplex ifconfig em1 up media 1000baseTX mediaopt full-duplex #create the lagg interface ifconfig lagg0 create #set lagg0's protocol to lacp, add both cards to the interface, #and assign it em1's ip/netmask ifconfig lagg0 laggproto lacp laggport em0 laggport em1 ***.***.***.*** netmask 255.255.255.0 The switches are configured as follows: #clear out old junk no int Po1 default int range GigabitEthernet 0/15 - 16 # config ports interface range GigabitEthernet 0/15 - 16 description lagg-test switchport duplex full speed 1000 switchport access vlan 192 spanning-tree portfast channel-group 1 mode active channel-protocol lacp **** switchport trunk encapsulation dot1q **** no shutdown exit interface Port-channel 1 description lagginterface switchport access vlan 192 exit port-channel load-balance src-mac end obviously change 1000's to 100's and GigabitEthernet to FastEthernet for the 3550's config, as that switch has 100Mbit speed ports. With this config on the 3550, I get failover and 92Mbits/sec speed on both links, simultaneously, connecting to 2 hosts.(tested with iperf) Success. However this is only with the "switchport trunk encapsulation dot1q" line. First, I do not understand why I need this, I thought it was only for connecting switches. Is there some other setting which this turns on that is actually responsible for the speed increase? Second, This config does not work on the 3560. I get failover, but not the speed increase. Speeds drop from gig/sec to 500Mbit/sec when I make 2 simultaneous connections to the server with or without the encapsulation line. I should mention that both switches are using source-mac load balancing. In my test I am using Iperf. I have the server(lagg box) setup as the server(iperf -s), and the client computers are client(iperf -c server-ip-address), so the source mac(and IP) are different for both connections. Any ideas/corrections/questions would be helpful, as the gig switches are what I actually need the lagg links on. Ask if you need more information.

Read the article

Help me exorcise my demon possessed logon script

- by Detritus Maximus

I have a user logon script that copies a file over to a subfolder of the current user's profile path: Script (only showing the line that isn't working): copy /Y c:\records\javasettings_Windows_x86.xml "%USERPROFILE%\Application Data\OpenOffice.org\3\user\config">>c:\records\OOo3%USERNAME%.txt 2>&1 To diagnose why it wasn't working, I did a somelogfile.log parameter on the group policy script and found that what the above command is translating to is this: C:\WINDOWS>copy /Y c:\records\javasettings_Windows_x86.xml "C:\Documents and Settings\test2\Application Data\OpenOffice.org\3\user\config" 1>>c:\records\OOo3test2.txt 2>&1 So the question is, how do I get rid of (exorcise) the " 1" in that line? Update 1: So the reason the script wasn't working was that the creator didn't have any permissions on the directory. I fixed the permissions, and now the file works but! I still have the " 1" showing on all the logs and would like to know why.

Read the article

Help desk cannot respond to UAC prompts over Remote Assistance

- by blsub6

I'm trying to use the in-built Remote Assistance (RA) software in Windows 7 to support my users. I initiate a RA session with the user and ask to remotely control their desktop. They tick a little check box that says something to the effect of 'allow helper to respond to UAC prompts' and it pops up with a UAC prompt. The user cannot respond to the UAC prompt because they're not a local administrator - I am. Isn't that what that little check box is for??? I've found this on TechNet from back in '07 on Vista. From what I've found, I could disable UAC (terrible idea) or make all my users local administrators on their computers (yet another terrible idea). I'm hoping that MS has fixed this little oversight in Windows 7. Remote Assistance is completely useless to me if I can't respond to UAC prompts with my username and password

Read the article

help setting up an IPSEC vpn from my linux box

- by robthewolf

I have an office with a router and a remote server (Linux - Ubuntu 10.10). Both locations need to connect to a data supplier through a VPN. The VPN is an IPSEC gateway. I was able to configure my Linksys rv42 router to create a VPN connection successfully and now I need to do the same for Linux server. I have been messing around with this for too long. First I tried OpenVPN, but that is SSL and not IPSEC. Then I tried Shrew. I think I have the settings correct but I haven't been able to create the connection. It maybe that I have to use something else like a direct IPSEC config or something like that. If someone knows of a way to turn the following settings that I have been given below into a working IPSEC VPN connection I would be very grateful. Here are the settings I was given that must be used to connect to my supplier: Local destination network: 192.168.4.0/24 Local destination hosts: 192.168.4.100 Remote destination network: 192.167.40.0/24 Remote destination hosts: 192.168.40.27 VPN peering point: xxx.xxx.xxx.xxx Then they have given me the following details: IPSEC/ISAKMP Phase 1 Parameters: Authentication method: pre shared secret Diffie Hellman group: group 2 Encryption Algorithm: 3DES Lifetime in seconds:28800 Phase 2 parameters: IPSEC security: ESP Encryption algortims: 3DES Authentication algorithms: MD5 lifetime in seconds: 28800 pfs: disabled Here are the settings from my attempt to use shrew: n:version:2 n:network-ike-port:500 n:network-mtu-size:1380 n:client-addr-auto:0 n:network-frag-size:540 n:network-dpd-enable:1 n:network-notify-enable:1 n:client-banner-enable:1 n:client-dns-used:1 b:auth-mutual-psk:YjJzN2QzdDhyN2EyZDNpNG42ZzQ= n:phase1-dhgroup:2 n:phase1-keylen:0 n:phase1-life-secs:28800 n:phase1-life-kbytes:0 n:vendor-chkpt-enable:0 n:phase2-keylen:0 n:phase2-pfsgroup:-1 n:phase2-life-secs:28800 n:phase2-life-kbytes:0 n:policy-nailed:0 n:policy-list-auto:1 n:client-dns-auto:1 n:network-natt-port:4500 n:network-natt-rate:15 s:client-dns-addr:0.0.0.0 s:client-dns-suffix: s:network-host:xxx.xxx.xxx.xxx s:client-auto-mode:pull s:client-iface:virtual s:client-ip-addr:192.168.4.0 s:client-ip-mask:255.255.255.0 s:network-natt-mode:enable s:network-frag-mode:disable s:auth-method:mutual-psk s:ident-client-type:address s:ident-client-data:192.168.4.0 s:ident-server-type:address s:ident-server-data:192.168.40.0 s:phase1-exchange:aggressive s:phase1-cipher:3des s:phase1-hash:md5 s:phase2-transform:3des s:phase2-hmac:md5 s:ipcomp-transform:disabled Finally here is the debug output from the shrew log: 10/12/22 17:22:18 ii : ipc client process thread begin ... 10/12/22 17:22:18 < A : peer config add message 10/12/22 17:22:18 DB : peer added ( obj count = 1 ) 10/12/22 17:22:18 ii : local address 217.xxx.xxx.xxx selected for peer 10/12/22 17:22:18 DB : tunnel added ( obj count = 1 ) 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : client config message 10/12/22 17:22:18 < A : local id '192.168.4.0' message 10/12/22 17:22:18 < A : remote id '192.168.40.0' message 10/12/22 17:22:18 < A : preshared key message 10/12/22 17:22:18 < A : peer tunnel enable message 10/12/22 17:22:18 DB : new phase1 ( ISAKMP initiator ) 10/12/22 17:22:18 DB : exchange type is aggressive 10/12/22 17:22:18 DB : 217.xxx.xxx.xxx:500 <- 206.xxx.xxx.xxx:500 10/12/22 17:22:18 DB : c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 DB : phase1 added ( obj count = 1 ) 10/12/22 17:22:18 : security association payload 10/12/22 17:22:18 : - proposal #1 payload 10/12/22 17:22:18 : -- transform #1 payload 10/12/22 17:22:18 : key exchange payload 10/12/22 17:22:18 : nonce payload 10/12/22 17:22:18 : identification payload 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v00 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v01 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v02 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v03 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( rfc ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports DPDv1 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SHREW SOFT compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is NETSCREEN compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SIDEWINDER compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is CISCO UNITY compatible 10/12/22 17:22:18 = : cookies c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 = : message 00000000 10/12/22 17:22:18 - : send IKE packet 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 ( 484 bytes ) 10/12/22 17:22:18 DB : phase1 resend event scheduled ( ref count = 2 ) 10/12/22 17:22:18 ii : opened tap device tap0 10/12/22 17:22:28 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:38 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:48 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:58 ii : resend limit exceeded for phase1 exchange 10/12/22 17:22:58 ii : phase1 removal before expire time 10/12/22 17:22:58 DB : phase1 deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : closed tap device tap0 10/12/22 17:22:58 DB : tunnel stats event canceled ( ref count = 1 ) 10/12/22 17:22:58 DB : removing tunnel config references 10/12/22 17:22:58 DB : removing tunnel phase2 references 10/12/22 17:22:58 DB : removing tunnel phase1 references 10/12/22 17:22:58 DB : tunnel deleted ( obj count = 0 ) 10/12/22 17:22:58 DB : removing all peer tunnel refrences 10/12/22 17:22:58 DB : peer deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : ipc client process thread exit ...

Read the article

Help setting up an secondary authoritative DNS server.

- by GLB03

We have three Authoritative DNS servers and three recursive/caching DNS servers on my campus. Authoritative servers DNS1- Windows 2003 DNS2- Old Red Hat ----- Replacing w/ newer version DNS3- Windows 2008 (I installed) Caching and Recursive resolvers servers Server1- Windows 2003 Server2- CentOS 5.2 (I installed) Server3- CentOS 5.3 (I installed) I am replacing DNS2 with a newer Red Hat version, but have no documentation on how it was implemented. I have setup caching and windows authoritative servers, but not a linux secondary authoritative server. I have a perl script from the original server that pulls data from our DNS1 server. We use DJBDNS and TinyDNS on our linux servers. Our Network Engineer says the DNS2 server I am replacing is an authoritative server that doesn't need to be caching, but the only instructions I see is for an Authoritative server that does caching as well. Can someone point me in the right directions. I thought I was on the right track with using these instructions but when I query my new dns server I get "No response from server", I have temporarily disabled iptables to eliminate it from being an issue. ps -aux | grep dns avahi 3493 0.0 0.2 2600 1272 ? Ss Apr24 0:05 avahi-daemon: running [newdns2.local] root 5254 0.0 0.1 3920 680 pts/0 R+ 09:56 0:00 grep dns root 6451 0.0 0.0 1528 308 ? S Apr29 0:00 supervise tinydns dnslog 6454 0.0 0.0 1540 308 ? S Apr29 0:00 multilog t ./main tinydns 9269 0.0 0.0 1652 308 ? S Apr29 0:00 /usr/local/bin/tinydns

Read the article

Bit of python help

- by user42780

I've tried to get this to work, but it just freezes. It should display a pyramid, but all it does is.. halts. from graphics import * valid_colours = ['red', 'blue', 'yellow', 'green'] colour = ['', '', ''] while True: colour[0] = raw_input("Enter your first colour: ") colour[1] = raw_input("Enter your second colour: ") colour[2] = raw_input("Enter your third colour: ") if ((colour[0] and colour[1] and colour[2]) in valid_colours): break while True: width = raw_input("Enter a width between 2-7: ") if width.isdigit(): if (int(width) <= 7 and int(width) >= 2): break width = int(width) win = GraphWin("My Mini Project ", 1000, 1000) # 1000 \ 20 = 50 win.setCoords(0 , 0 , 20, 20) p1 = [0, 2] while width > 0: p = [1, 3] loopWidth = 0 while loopWidth < width: loopWidth = loopWidth + 1 c = 0 while c <= 10: c = c + 1 if c % 2: colour = "white" else: colour = "red" rectangle = Rectangle(Point(p[0],p1[0]), Point(p[1], p1[1])) rectangle.setFill(colour) rectangle.setOutline("black") rectangle.draw(win) p[0] = p[0] + 0.2 p1[0] = p1[0] + 0.2 p[0] = p[0] - 2 p1[0] = p1[0] - 2 p[0] = p[0] + 2 p[1] = p[1] + 2 width = width - 1 p1[0] = p1[0] + 2 p1[1] = p1[1] + 2

Read the article

Unable to record using Jmeter: [help me very urgent]

- by krish

Hi, I am trying to record a http web page using Jmeter 2.3.3 version.I has setup the JMeter proxy and tried, but did n't work. I have followed the below steps. 1. Launch jmeter 2.3.3, added thred group to test plan 2. Under Workbench-add-non-test elements- added HTTP proxy server. proxy server setting are port:9090, target:use recording controller, grouping:donot group samplers, Type:HTTp request and checked the boxes of all under http sampler settings 3.Saved the settings 4. Now in browser(IE 7.0 or firefox 3.0.16), under connection settings, setup the manual proxy settings as local host and port as 9090(no auto detect settings nothing, only manual proxy). Setting saved 5.Now in the jmeter, started the http proxy server. 6. Open a browser and hit the webpage needs to be tested. The page is not opened. In fact because of the changes made in browsers, no pages are opened. Whenever i try hitting a page, the pages are recorded in the Jmeter. but without the page open, how can i test. I looking for an immediate answer and my work is blocked. Immediate answer would be appreciated.

Read the article

Help debugging Sendmail/Mailman configuration issue

- by inxilpro

Hi folks, I'm trying to configure a server with Sendmail and Mailman. I've been getting "Broken pipe" errors for a while, and have slowly been debugging. I fixed some permission issues, and changed the user that Mailman expects to be called from, among other things. Finally, I'd gone through everything I could think of, so I added a new test to see if it's the Mailman script or Sendmail that's causing the problem. Here's the error I'm getting now (stripped of timestamps and identifying information): <-- MAIL FROM:[email protected] Authentication-Warning: xxxxx.org: xxxxxxxxxxxxxx.net [xx.xx.xxx.xxx] didn't use HELO protocol --- 250 2.1.0 [email protected]... Sender ok <-- RCPT TO: [email protected] --- 250 2.1.5 [email protected]... Recipient ok <-- DATA --- 354 Enter mail, end with "." on a line by itself [email protected], size=20, class=0, nrcpts=1, msgid=<[email protected]>, proto=SMTP, relay=xxxxxxxxxxxxxx.net [xx.xx.xxx.xxx] --- 250 2.0.0 o6KMg2xZ025804 Message accepted for delivery alias [email protected] => "|/bin/echo foo" SYSERR(root): putbody: write error: Broken pipe 0: fl=0x0, mode=20660: CHR: dev=0/15, ino=776, nlink=1, u/gid=0/0, size=0 1: fl=0x1, mode=20660: CHR: dev=0/15, ino=776, nlink=1, u/gid=0/0, size=0 2: fl=0x1, mode=20660: CHR: dev=0/15, ino=776, nlink=1, u/gid=0/0, size=0 3: fl=0x2, mode=140777: SOCK localhost->[[UNIX: /dev/log]] 5: fl=0x0, mode=100600: dev=8/3, ino=486765, nlink=1, u/gid=0/51, size=5 6: fl=0x8000, mode=100640: dev=8/3, ino=65501, nlink=1, u/gid=0/0, size=12288 7: fl=0x8000, mode=100640: dev=8/3, ino=65501, nlink=1, u/gid=0/0, size=12288 8: fl=0x8000, mode=100640: dev=8/3, ino=65510, nlink=1, u/gid=0/0, size=12288 9: fl=0x8000, mode=100640: dev=8/3, ino=65510, nlink=1, u/gid=0/0, size=12288 10: fl=0x8000, mode=100640: dev=8/3, ino=64814, nlink=1, u/gid=0/51, size=12288 11: fl=0x8000, mode=100640: dev=8/3, ino=64814, nlink=1, u/gid=0/51, size=12288 12: fl=0x1, mode=100600: dev=8/3, ino=486767, nlink=1, u/gid=0/51, size=754 13: fl=0x1, mode=10600: FIFO: dev=0/5, ino=7649785, nlink=1, u/gid=0/51, size=0 14: fl=0x0, mode=10600: FIFO: dev=0/5, ino=7649786, nlink=1, u/gid=0/51, size=0 MCI@0x0: NULL MCI@0x0: NULL to="|/bin/echo foo", [email protected] (8/0), delay=00:00:08, xdelay=00:00:00, mailer=prog, pri=30476, dsn=5.0.0, stat=Service unavailable o6KMsnxX025948: DSN: Service unavailable done; delay=00:00:08, ntries=1 The alias in /etc/aliases is: cmtest: "|/bin/echo foo" As you can see, even when trying to pipe to /bin/echo I still get the same error. But I can't for the life of me figure out what else to check. Normal aliases work fine. Any ideas? Thanks!

Read the article

Can any body help to split php source code

- by joe-on-wp

hi, can any body help me on separating this example of data that i need to parse and seperate text just like PHPDoc. It is PHP source code. The example string : function one_to_tree() { //bla bla bla return FALSE; } function two_to_tree() { //bla bla bla return FALSE; } function three_to_tree() { if ($sample){ //bla bla bla } return FALSE; } can anybody help me how to seperate above string based on "function" word and create and array. Thank you

Read the article

Cisco T1 Routing Help

- by Joseph

Thanks to someone on this site I was able to get the Serial0/0 interface up. I now have: DCD=up DSR=up DTR=up RTS=up CTS=up My next challenge seems to be in the routing and/or PC ip setup. This are the pertinent details from L3: WAN Network: 6.59.186.60/30 Level3 Side: 6.59.186.61 Customer Side: 6.59.186.62 Cust. LAN IPs: 6.59.192.224/27 What would be the IOS commands to setup this route correctly? Am I correct that I would the choose an IP like 6.59.192.224, subnet 255.0.0.0, gateway 6.59.186.62? Thanks

Read the article

hudson/jenkins: help needed to get started with customization work

- by user64204

I'm would to customize jenkins by adding links to the left hand side panel and use the pages associated with these links to serve some custom content in place of the jobs/views table displayed by default. I managed to add links to the side-bar using the sidebar-links plugin. Now I'm trying to see how to replace the content of the <td id="main-panel"> element with some custom content. The custom content is generated by some PHP scripts which ideally should be called by hudson every time the custom pages are requested, though if too complicated I can either create static content to be served by jenkins by calling my PHP scripts in a crontab or see if calls to the PHP scripts can be done by apache itself before the page requests are sent to jenkins. I'm not sure writing a plugin is the best way to proceed and I would like to have your thoughts as to how you think I should implement this.

Read the article

Need help using a super scope

- by Vdub

I have a windows server 2008 r2 standard running our DCHP, DNS, and AD. also I have (3) HP Pro Curve 2510-G switches (J9280A). Right now our LAN is set up 192.168.50.2-192.168.50.254 on our sub-net (A) and another scope with 192.168.51.2-192.168.51.254 sub-net (B) both have sub-net mask of 255.255.255.0. The same server is our DNS which is 192.168.50.242 and our firewall (watchguard) is the gateway at 192.168.50.1. Right now the sub-net (B) does not have DHCP active so only sub-net (A) is giving a pool. My problem is that we are trying to have open WiFi on our network and i am assuming that i can use the sub-net (B) for that if i activate it and use sub-net (A) for our staff only. I have noticed that when i set up a static on a client pc and set it to 192.168.51.x i cannot use the DNS of 192.168.50.242 however i can use 8.8.8.8 and it works fine, i am guessing that because it is on a different sub-net? Forgive me as i am very new at this and dont know a lot. Is there easy way with the equipment i have to a accommodate wifi for hundreds of people without causing problems for our staff? (multiple same IP address assigns) I appreciate any and all info!

Read the article

Need help configurating my Tomcat server

- by gablin

I just reinstalled my entire server, and now I can't seem to get my JSP-based website to work on Tomcat anymore. I use the same server.xml file, which worked perfectly before the reinstallation, but no longer. Here's the content of the server.xml file which worked before:  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">    <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" />      <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>        <Host name="www.rebootradio.nu"> <Alias>rebootradio.nu</Alias> <Context path="" docBase="D:/services/http/rebootradio.nu" debug="1" reloadable="true"/> </Host> </Engine> </Service> </Server> The JSP site doesn't use any WAR files or anything like that; there's just a default.jsp in the specified folder D:/services/http/rebootradio.nu which loads the site. As I said, this configuration worked before, but now with the latest verion of XAMPP and Tomcat it doesn't work anymore. All I get is a 404 message saying The requested resource () is not available.

Read the article

BSOD in fastfat.sys, any help?

- by rajivpradeep

A problem has been deteceted and windows has been shut down to prevent damage to ypur computer. The problem seems to be caused by the following file : Fastfat.SYS PAGE_FAULT_IN_NONPAGED_AREA technical information : STOP 0x10000050(0xffffffc8, 0x00000000, 0xb6aa68ef , 0x00000000) FAstfat.SYS - address 0xb6aa68ef base at 0xb6a9e000 datestamp 0x41107b7

Read the article

Need Help with fixing permissions in mounted Drive

- by Master

I am trying a lot still my problem is not solved. I have a partion called Server and inside it i have 5 folders like Folder 1 FOlder 2 Folder 3 I am mounting the drive on startup by using following command as told to me by some senoir members and it works but with some problems /dev/sdb1 /media/Server ntfs defaults,umask=006,fmask=000,dmask=007,uid=1000,gid=1001 0 0 The problem is with this command the permission are applied to all folders like Folder 1 , Folder 2 , FOlder3 But i want that only FOlder 3 should be publicly readable and writable while all other should be private and no one should have access to that. How can i achieve that

Read the article

IIS 6 windows 2003 help installing SSL cert

- by ADAM

I requested a new ssl cert from godaddy which has been issued. When try to install it in iis through the website directory security tab i get a "the pending certificate request for this response file was not found. this request may be cancelled. you cannot install selected response certificate using this wizard" error. I may have run the wizard and deleted the pending request. Is there any way i can install the certificate without getting a new one? (i hope so) I have the original certrequest.txt file

Read the article

need help writing puppet module for sssd.conf using Hiera

- by mr.zog

I need to build a module to manage /etc/sssd/sssd.conf on our Red Hat VMs. The sssd modules published on the forge don't seem to do what I want, nor do I feel like forking any of them. I want to keep all the configuration data in Hiera's common.yaml file. Below is my sssd.conf file. [sssd] config_file_version = 2 services = nss, pam domains = default [nss] filter_groups = root filter_users = root reconnection_retries = 3 entry_cache_timeout = 300 entry_cache_nowait_percentage = 75 [pam] [domain/default] auth_provider = ldap ldap_id_use_start_tls = True chpass_provider = ldap cache_credentials = True ldap_search_base = dc=ederp,dc=com id_provider = ldap ldap_uri = ldaps://lvldap1.lvs01.ederp.com/ ldaps://lvldap2.lvs01.ederp.com/ ldap_tls_cacertdir = /etc/openldap/cacerts What is the best, most economical way to build the sssd.conf file? Should I have multiple .pp files such as domain.pp, pam.pp etc. or should all the lines of configuration land in init.pp?

Read the article

Apache 2: Mod_Rewrite Help - If/else for directory exists

- by BHare

This is my current and sloppy Apache 2 mod_rewrite. Keep in mine the part with site1 site2..etc has about 50 sites. RewriteEngine on RewriteCond %{HTTP_HOST} ^([^.]+)\.mainsite\.org$ RewriteCond /home/%1/ -d RewriteRule ^(.+) %{HTTP_HOST}$1 RewriteRule ^([^.]+)\.mainsite\.org/media/(.*) /home/$1/special/media/$2 RewriteRule ^([^.]+)\.mainsite\.org/(.*) /home/$1/www/$2 RewriteCond %{HTTP_HOST} ^mainsite\.org$ [NC] RewriteRule ^(.*)$ http://www.mainsite.org$1 [R=302] RewriteCond %{HTTP_HOST} (site1|site2|site3|site4)\.(com|net|biz|org|us)$ [NC] RewriteCond %{REQUEST_URI} !^/media/ RewriteRule ^/(.*)$ /home/%1/www/$1 RewriteCond %{HTTP_HOST} (site1|site2|site3|site4)\.(com|biz|net|org|us)$ [NC] RewriteRule ^/media/(.*)$ /home/%1/special/media/$1 RewriteCond %{REQUEST_URI} favicon.ico$ RewriteRule ^(.*)$ /misc/favicon.ico So if someone tries to go to theirusername.mainsite.org it will check if /home/theirusername/ exists, and if it does use their www (/home/theirusername/www/) as the file location for web files. If they try they try to access theirusername.mainsite.org/media/ it will make a special file location to look for the file(s) at /home/theirusername/special/media/ I would like it if the username did NOT have /home/username that it would automatically default to www.mainsite.org. I am having a hard time understanding how to do skips and such. so: If someone went to notrealusername.mainsite.org/forum/ it would auto direct to www.mainsite.org/forum/ Extra: I am using repetitive code for other site for example lets say foobar has a website foobar.com, it goes through the same process as mainsite.org so figured maybe having something like: RewriteCond %{HTTP_HOST} ^([^.]+).(mainsite.org|com|net|biz|org)$ where I could have one major rule for all existing domains who have a /home/

Search Results

Search found 61369 results on 2455 pages for 'simulation help'.

Page 49/2455 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56 | Next Page >

- by free-lexx

- by mozillalives

- by Septagram

- by Xavier

- by Legolas

- by thatryan

- by JPro

- by Flamewires

- by Detritus Maximus

- by blsub6

- by robthewolf

- by GLB03

- by user42780

- by krish

- by inxilpro

- by joe-on-wp

- by Joseph

- by user64204

- by Vdub

- by gablin

- by rajivpradeep

- by Master

- by ADAM

- by mr.zog

- by BHare

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56 | Next Page >