Search Results

Search found 13434 results on 538 pages for 'boot on power up'.

Page 520/538 | < Previous Page | 516 517 518 519 520 521 522 523 524 525 526 527  | Next Page >

• Microsoft Business Intelligence Seminar 2011

  - by DavidWimbush

  I was lucky enough to attend the maiden presentation of this at Microsoft Reading yesterday. It was pretty gripping stuff not only because of what was said but also because of what could only be hinted at. Here's what I took away from the day. (Disclaimer: I'm not a BI guru, just a reasonably experienced BI developer, so I may have misunderstood or misinterpreted a few things. Particularly when so much of the talk was about the vision and subtle hints of what is coming. Please comment if you think I've got anything wrong. I'm also not going to even try to cover Master Data Services as I struggled to imagine how you would actually use it.) I was a bit worried when I learned that the whole day was going to be presented by one guy but Rafal Lukawiecki is a very engaging speaker. He's going to be presenting this about 20 times around the world over the coming months. If you get a chance to hear him speak, I say go for it. No doubt some of the hints will become clearer as Denali gets closer to RTM. Firstly, things are definitely happening in the SQL Server Reporting and BI world. Traditionally IT would build a data warehouse, then cubes on top of that, and then publish them in a structured and controlled way. But, just as with many IT projects in general, by the time it's finished the business has moved on and the system no longer meets their requirements. This not sustainable and something more agile is needed but there has to be some control. Apparently we're going to be hearing the catchphrase 'Balancing agility with control' a lot. More users want more access to more data. Can they define what they want? Of course not, but they'll recognise it when they see it. It's estimated that only 28% of potential BI users have meaningful access to the data they need, so there is a real pent-up demand. The answer looks like: give them some self-service tools so they can experiment and see what works, and then IT can help to support the results. It's estimated that 32% of Excel users are comfortable with its analysis tools such as pivot tables. It's the power user's preferred tool. Why fight it? That's why PowerPivot is an Excel add-in and that's why they released a Data Mining add-in for it as well. It does appear that the strategy is going to be to use Reporting Services (in SharePoint mode), PowerPivot, and possibly something new (smiles and hints but no details) to create reports and explore data. Everything will be published and managed in SharePoint which gives users the ability to mash-up, share and socialise what they've found out. SharePoint also gives IT tools to understand what people are looking at and where to concentrate effort. If PowerPivot report X becomes widely used, it's time to check that it shows what they think it does and perhaps get it a bit more under central control. There was more SharePoint detail that went slightly over my head regarding where Excel Services and Excel Web Application fit in, the differences between them, and the suggestion that it is likely they will one day become one (but not in the immediate future). That basic pattern is set to be expanded upon by further exploiting Vertipaq (the columnar indexing engine that enables PowerPivot to store and process a lot of data fast and in a small memory footprint) to provide scalability 'from the desktop to the data centre', and some yet to be detailed advances in 'frictionless deployment' (part of which is about making the difference between local and the cloud pretty much irrelevant). Excel looks like becoming Microsoft's primary BI client. It already has: the ability to consume cubes strong visualisation tools slicers (which are part of Excel not PowerPivot) a data mining add-in PowerPivot A major hurdle for self-service BI is presenting the data in a consumable format. You can't just give users PowerPivot and a server with a copy of the OLTP database(s). Building cubes is labour intensive and doesn't always give the user what they need. This is where the BI Semantic Model (BISM) comes in. I gather it's a layer of metadata you define that can combine multiple data sources (and types of data source) into a clear 'interface' that users can work with. It comes with a new query language called DAX. SSAS cubes are unlikely to go away overnight because, with their pre-calculated results, they are still the most efficient way to work with really big data sets. A few other random titbits that came up: Reporting Services is going to get some good new stuff in Denali. Keep an eye on www.projectbotticelli.com for the slides. You can also view last year's seminar sessions which covered a lot of the same ground as far as the overall strategy is concerned. They plan to add more material as Denali's features are publicly exposed. Check out the PASS keynote address for a showing of Yahoo's SQL BI servers. Apparently they wheeled the rack out on stage still plugged in and running! Check out the Excel 2010 Data Mining Add-Ins. 32 bit only at present but 64 bit is on the way. There are lots of data sets, many of them free, at the Windows Azure Marketplace Data Market (where you can also get ESRI shape files). If you haven't already seen it, have a look at the Silverlight Pivot Viewer (http://weblogs.asp.net/scottgu/archive/2010/06/29/silverlight-pivotviewer-now-available.aspx). The Bing Maps Data Connector is worth a look if you're into spatial stuff (http://www.bing.com/community/site_blogs/b/maps/archive/2010/07/13/data-connector-sql-server-2008-spatial-amp-bing-maps.aspx).  

  Read the article

• Create Advanced Panoramas with Microsoft Image Composite Editor

  - by Matthew Guay

  Do you enjoy making panoramas with your pictures, but want more features than tools like Live Photo Gallery offer?  Here’s how you can create amazing panoramas for free with the Microsoft Image Composite Editor. Yesterday we took a look at creating panoramic photos in Windows Live Photo Gallery. Today we take a look at a free tool from Microsoft that will give you more advanced features to create your own masterpiece. Getting Started Download Microsoft Image Composite Editor from Microsoft Research (link below), and install as normal.  Note that there are separate version for 32 & 64-bit editions of Windows, so make sure to download the correct one for your computer. Once it’s installed, you can proceed to create awesome panoramas and extremely large image combinations with it.  Microsoft Image Composite Editor integrates with Live Photo Gallery, so you can create more advanced panoramic pictures directly.  Select the pictures you want to combine, click Extras in the menu bar, and select Create Image Composite. You can also create a photo stitch directly from Explorer.  Select the pictures you want to combine, right-click, and select Stitch Images… Or, simply launch the Image Composite Editor itself and drag your pictures into its editor.  Either way you start a image composition, the program will automatically analyze and combine your images.  This application is optimized for multiple cores, and we found it much faster than other panorama tools such as Live Photo Gallery. Within seconds, you’ll see your panorama in the top preview pane. From the bottom of the window, you can choose a different camera motion which will change how the program stitches the pictures together.  You can also quickly crop the picture to the size you want, or use Automatic Crop to have the program select the maximum area with a continuous picture.   Here’s how our panorama looked when we switched the Camera Motion to Planar Motion 2. But, the real tweaking comes in when you adjust the panorama’s projection and orientation.  Click the box button at the top to change these settings. The panorama is now overlaid with a grid, and you can drag the corners and edges of the panorama to change its shape. Or, from the Projection button at the top, you can choose different projection modes. Here we’ve chosen Cylinder (Vertical), which entirely removed the warp on the walls in the image.  You can pan around the image, and get the part you find most important in the center.  Click the Apply button on the top when you’re finished making changes, or click Revert if you want to switch to the default view settings. Once you’ve finished your masterpiece, you can export it easily to common photo formats from the Export panel on the bottom.  You can choose to scale the image or set it to a maximum width and height as well.  Click Export to disk to save the photo to your computer, or select Publish to Photosynth to post your panorama online. Alternately, from the File menu you can choose to save the panorama as .spj file.  This preserves all of your settings in the Image Composite Editor so you can edit it more in the future if you wish.   Conclusion Whether you’re trying to capture the inside of a building or a tall tree, the extra tools in Microsoft Image Composite Editor let you make nicer panoramas than you ever thought possible.  We found the final results surprisingly accurate to the real buildings and objects, especially after tweaking the projection modes.  This tool can be both fun and useful, so give it a try and let us know what you’ve found it useful for. Works with 32 & 64-bit versions of XP, Vista, and Windows 7 Link Download Microsoft Image Composite Editor Similar Articles Productive Geek Tips Change or Set the Greasemonkey Script Editor in FirefoxNew Vista Syntax for Opening Control Panel Items from the Command-lineTune Your ClearType Font Settings in Windows VistaChange the Default Editor From Nano on Ubuntu LinuxMake MSE Create a Restore Point Before Cleaning Malware TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor

  Read the article

• Stumbling Through: Making a case for the K2 Case Management Framework

  I have recently attended a three-day training session on K2s Case Management Framework (CMF), a free framework built on top of K2s blackpearl workflow product, and I have come away with several different impressions for some of the different aspects of the framework.  Before we get into the details, what is the Case Management Framework?  It is essentially a suite of tools that, when used together, solve many common workflow scenarios.  The tool has been developed over time by K2 consultants that have realized they tend to solve the same problems over and over for various clients, so they attempted to package all of those common solutions into one framework.  Most of these common problems involve workflow process that arent necessarily direct and would tend to be difficult to model.  Such solutions could be achieved in blackpearl alone, but the workflows would be complex and difficult to follow and maintain over time.  CMF attempts to simplify such scenarios not so much by black-boxing the workflow processes, but by providing different points of entry to the processes allowing them to be simpler, moving the complexity to a middle layer.  It is not a solution in and of itself, development is still required to tie the pieces together. CMF is under continuous development, both a plus and a minus in that bugs are fixed quickly and features added regularly, but it may be difficult to know which versions are the most stable.  CMF is not an officially supported K2 product, which means you will not get technical support but you will get access to the source code. The example given of a business process that would fit well into CMF is that of a file cabinet, where each folder in said file cabinet is a case that contains all of the data associated with one complaint/customer/incident/etc. and various users can access that case at any time and take one of a set of pre-determined actions on it.  When I was given that example, my first thought was that any workflow I have ever developed in the past could be made to fit this model there must be more than just this model to help decide if CMF is the right solution.  As the training went on, we learned that one of the key features of CMF is SharePoint integration as each case gets a SharePoint site created for it, and there are a number of excellent web parts that can be used to design a portal for users to get at all the information on their cases.  While CMF does not require SharePoint, without it you will be missing out on a huge portion of functionality that CMF offers.  My opinion is that without SharePoint integration, you may as well write your workflows and other components the old fashioned way. When I heard that each case gets its own SharePoint site created for it, warning bells immediately went off in my head as I felt that depending on the data load, a CMF enabled solution could quickly overwhelm SharePoint with thousands of sites so we have yet another deciding factor for CMF:  Just how many cases will your solution be creating?  While it is not necessary to use the site-per-case model, it is one of the more useful parts of the framework.  Without it, you are losing a big chunk of what CMF has to offer. When it comes to developing on top of the Case Management Framework, it becomes a matter of configuring what makes up a case, what can be done to a case, where each action on a case should take the user, and then typing up actions to case statuses.  This last step is one that I immediately warmed up to, as just about every workflow Ive designed in the past needed some sort of mapping table to set the status of a work item based on the action being taken definitely one of those common solutions that it is good to see rolled up into a re-useable entity (and it gets a nice configuration UI to boot!).  This concept is a little different than traditional workflow design, in that you dont have to think of an end-to-end process around passing a case along a path, rather, you must envision the case as central object with workflow threads branching off of it and doing their own thing with the case data.  Certainly there can be certain workflow threads that get rather complex, but the idea is that they RELATE to the case, they dont BECOME the case (though it is still possible with action->status mappings to prevent certain actions in certain cases, so it isnt always a wide-open free for all of actions on a case). I realize that this description of the Case Management Framework merely scratches the surface on what the product actually can do, and I dont think Ive conclusively defined for what sort of business scenario you can make a case for Case Management Framework.  What I do hope to have accomplished with this post is to raise awareness of CMF there is a (free!) product out there that could potentially simplify a tangled workflow process and give (for free!) a very useful set of SharePoint web parts and a nice set of (free!) reports.  The best way to see if it will truly fit your needs is to give it a try did I mention it is FREE?  Er, ok, so it is free, but only obtainable at this time for K2 partnersDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Changing CSS with jQuery syntax in Silverlight using jLight

  - by Timmy Kokke

  Lately I’ve ran into situations where I had to change elements or had to request a value in the DOM from Silverlight. jLight, which was introduced in an earlier article, can help with that. jQuery offers great ways to change CSS during runtime. Silverlight can access the DOM, but it isn’t as easy as jQuery. All examples shown in this article can be looked at in this online demo. The code can be downloaded here.   Part 1: The easy stuff Selecting and changing properties is pretty straight forward. Setting the text color in all <B> </B> elements can be done using the following code:   jQuery.Select("b").Css("color", "red");   The Css() method is an extension method on jQueryObject which is return by the jQuery.Select() method. The Css() method takes to parameters. The first is the Css style property. All properties used in Css can be entered in this string. The second parameter is the value you want to give the property. In this case the property is “color” and it is changed to “red”. To specify which element you want to select you can add a :selector parameter to the Select() method as shown in the next example.   jQuery.Select("b:first").Css("font-family", "sans-serif");   The “:first” pseudo-class selector selects only the first element. This example changes the “font-family” property of the first <B></B> element to “sans-serif”. To make use of intellisense in Visual Studio I’ve added a extension methods to help with the pseudo-classes. In the example below the “font-weight” of every “Even” <LI></LI> is set to “bold”.   jQuery.Select("li".Even()).Css("font-weight", "bold");   Because the Css() extension method returns a jQueryObject it is possible to chain calls to Css(). The following example show setting the “color”, “background-color” and the “font-size” of all headers in one go.   jQuery.Select(":header").Css("color", "#12FF70") .Css("background-color", "yellow") .Css("font-size", "25px");   Part 2: More complex stuff In only a few cases you need to change only one style property. More often you want to change an entire set op style properties all in one go.  You could chain a lot of Css() methods together. A better way is to add a class to a stylesheet and define all properties in there. With the AddClass() method you can set a style class to a set of elements. This example shows how to add the “demostyle” class to all <B></B> in the document.   jQuery.Select("b").AddClass("demostyle");   Removing the class works in the same way:   jQuery.Select("b").RemoveClass("demostyle");   jLight is build for interacting with to the DOM from Silverlight using jQuery. A jQueryObjectCss object can be used to define different sets of style properties in Silverlight. The over 60 most common Css style properties are defined in the jQueryObjectCss class. A string indexer can be used to access all style properties ( CssObject1[“background-color”] equals CssObject1.BackgroundColor). In the code below, two jQueryObjectCss objects are defined and instantiated.   private jQueryObjectCss CssObject1; private jQueryObjectCss CssObject2;   public Demo2() { CssObject1 = new jQueryObjectCss { BackgroundColor = "Lime", Color="Black", FontSize = "12pt", FontFamily = "sans-serif", FontWeight = "bold", MarginLeft = 150, LineHeight = "28px", Border = "Solid 1px #880000" }; CssObject2 = new jQueryObjectCss { FontStyle = "Italic", FontSize = "48", Color = "#225522" }; InitializeComponent(); }   Now instead of chaining to set all different properties you can just pass one of the jQueryObjectCss objects to the Css() method. In this case all <LI></LI> elements are set to match this object.   jQuery.Select("li").Css(CssObject1); When using the jQueryObjectCss objects chaining is still possible. In the following example all headers are given a blue backgroundcolor and the last is set to match CssObject2.   jQuery.Select(":header").Css(new jQueryObjectCss{BackgroundColor = "Blue"}) .Eq(-1).Css(CssObject2);   Part 3: The fun stuff Having Silverlight call JavaScript and than having JavaScript to call Silverlight requires a lot of plumbing code. Everything has to be registered and strings are passed back and forth to execute the JavaScript. jLight makes this kind of stuff so easy, it becomes fun to use. In a lot of situations jQuery can call a function to decide what to do, setting a style class based on complex expressions for example. jLight can do the same, but the callback methods are defined in Silverlight. This example calls the function() method for each <LI></LI> element. The callback method has to take a jQueryObject, an integer and a string as parameters. In this case jLight differs a bit from the actual jQuery implementation. jQuery uses only the index and the className parameters. A jQueryObject is added to make it simpler to access the attributes and properties of the element. If the text of the listitem starts with a ‘D’ or an ‘M’ the class is set. Otherwise null is returned and nothing happens.   private void button1_Click(object sender, RoutedEventArgs e) { jQuery.Select("li").AddClass(function); }   private string function(jQueryObject obj, int index, string className) { if (obj.Text[0] == 'D' || obj.Text[0] == 'M') return "demostyle"; return null; }   The last thing I would like to demonstrate uses even more Silverlight and less jLight, but demonstrates the power of the combination. Animating a style property using a Storyboard with easing functions. First a dependency property is defined. In this case it is a double named Intensity. By handling the changed event the color is set using jQuery.   public double Intensity { get { return (double)GetValue(IntensityProperty); } set { SetValue(IntensityProperty, value); } }   public static readonly DependencyProperty IntensityProperty = DependencyProperty.Register("Intensity", typeof(double), typeof(Demo3), new PropertyMetadata(0.0, IntensityChanged));   private static void IntensityChanged(DependencyObject d, DependencyPropertyChangedEventArgs e) { var i = (byte)(double)e.NewValue; jQuery.Select("span").Css("color", string.Format("#{0:X2}{0:X2}{0:X2}", i)); }   An animation has to be created. This code defines a Storyboard with one keyframe that uses a bounce ease as an easing function. The animation is set to target the Intensity dependency property defined earlier.   private Storyboard CreateAnimation(double value) { Storyboard storyboard = new Storyboard(); var da = new DoubleAnimationUsingKeyFrames(); var d = new EasingDoubleKeyFrame { EasingFunction = new BounceEase(), KeyTime = KeyTime.FromTimeSpan(TimeSpan.FromSeconds(1.0)), Value = value }; da.KeyFrames.Add(d); Storyboard.SetTarget(da, this); Storyboard.SetTargetProperty(da, new PropertyPath(Demo3.IntensityProperty)); storyboard.Children.Add(da); return storyboard; }   Initially the Intensity is set to 128 which results in a gray color. When one of the buttons is pressed, a new animation is created an played. One to animate to black, and one to animate to white.   public Demo3() { InitializeComponent(); Intensity = 128; }   private void button2_Click(object sender, RoutedEventArgs e) { CreateAnimation(255).Begin(); }   private void button3_Click(object sender, RoutedEventArgs e) { CreateAnimation(0).Begin(); }   Conclusion As you can see jLight can make the life of a Silverlight developer a lot easier when accessing the DOM. Almost all jQuery functions that are defined in jLight use the same constructions as described above. I’ve tried to stay as close as possible to the real jQuery. Having JavaScript perform callbacks to Silverlight using jLight will be described in more detail in a future tutorial about AJAX or eventing.

  Read the article

• What Makes a Good Design Critic? CHI 2010 Panel Review

  - by Applications User Experience

  Author: Daniel Schwartz, Senior Interaction Designer, Oracle Applications User Experience Oracle Applications UX Chief Evangelist Patanjali Venkatacharya organized and moderated an innovative and stimulating panel discussion titled "What Makes a Good Design Critic? Food Design vs. Product Design Criticism" at CHI 2010, the annual ACM Conference on Human Factors in Computing Systems. The panelists included Janice Rohn, VP of User Experience at Experian; Tami Hardeman, a food stylist; Ed Seiber, a restaurant architect and designer; Jonathan Kessler, a food critic and writer at the Atlanta Journal-Constitution; and Larry Powers, Chef de Cuisine at Shaun's restaurant in Atlanta, Georgia. Building off the momentum of his highly acclaimed panel at CHI 2009 on what interaction design can learn from food design (for which I was on the other side as a panelist), Venkatacharya brought together new people with different roles in the restaurant and software interaction design fields. The session was also quite delicious -- but more on that later. Criticism, as it applies to food and product or interaction design, was the tasty topic for this forum and showed that strong parallels exist between food and interaction design criticism. Figure 1. The panelists in discussion: (left to right) Janice Rohn, Ed Seiber, Tami Hardeman, and Jonathan Kessler. The panelists had great insights to share from their respective fields, and they enthusiastically discussed as if they were at a casual collegial dinner. Jonathan Kessler stated that he prefers to have one professional critic's opinion in general than a large sampling of customers, however, "Web sites like Yelp get users excited by the collective approach. People are attracted to things desired by so many." Janice Rohn added that this collective desire was especially true for users of consumer products. Ed Seiber remarked that while people looked to the popular view for their target tastes and product choices, "professional critics like John [Kessler] still hold a big weight on public opinion." Chef Powers indicated that chefs take in feedback from all sources, adding, "word of mouth is very powerful. We also look heavily at the sales of the dishes to see what's moving; what's selling and thus successful." Hearing this discussion validates our design work at Oracle in that we listen to our users (our diners) and industry feedback (our critics) to ensure an optimal user experience of our products. Rohn considers that restaurateur Danny Meyer's book, Setting the Table: The Transforming Power of Hospitality in Business, which is about creating successful restaurant experiences, has many applicable parallels to user experience design. Meyer actually argues that the customer is not always right, but that "they must always feel heard." Seiber agreed, but noted "customers are not designers," and while designers need to listen to customer feedback, it is the designer's job to synthesize it. Seiber feels it's the critic's job to point out when something is missing or not well-prioritized. In interaction design, our challenges are quite similar, if not parallel. Software tasks are like puzzles that are in search of a solution on how to be best completed. As a food stylist, Tami Hardeman has the demanding and challenging task of presenting food to be as delectable as can be. To present food in its best light requires a lot of creativity and insight into consumer tastes. It's no doubt then that this former fashion stylist came up with the ultimate catch phrase to capture the emotion that clients want to draw from their users: "craveability." The phrase was a hit with the audience and panelists alike. Sometime later in the discussion, Seiber remarked, "designers strive to apply craveability to products, and I do so for restaurants in my case." Craveabilty is also very applicable to interaction design. Creating straightforward and smooth workflows for users of Oracle Applications is a primary goal for my colleagues. We want our users to really enjoy working with our products where it makes them more efficient and better at their jobs. That's our "craveability." Patanjali Venkatacharya asked the panel, "if a design's "craveability" appeals to some cultures but not to others, then what is the impact to the food or product design process?" Rohn stated that "taste is part nature and part nurture" and that the design must take the full context of a product's usage into consideration. Kessler added, "good design is about understanding the context" that the experience necessitates. Seiber remarked how important seat comfort is for diners and how the quality of seating will add so much to the complete dining experience. Sometimes if these non-food factors are not well executed, they can also take away from an otherwise pleasant dining experience. Kessler recounted a time when he was dining at a restaurant that actually had very good food, but the photographs hanging on all the walls did not fit in with the overall décor and created a negative overall dining experience. While the tastiness of the food is critical to a restaurant's success, it is a captivating complete user experience, as in interaction design, which will keep customers coming back and ultimately making the restaurant a hit. Figure 2. Patnajali Venkatacharya enjoyed the Sardian flatbread salad. As a surprise Chef Powers brought out a signature dish from Shaun's restaurant for all the panelists to sample and critique. The Sardinian flatbread dish showcased Atlanta's taste for fresh and local produce and cheese at its finest as a salad served on a crispy flavorful flat bread. Hardeman said it could be photographed from any angle, a high compliment coming from a food stylist. Seiber really enjoyed the colors that the dish brought together and thought it would be served very well in a casual restaurant on a summer's day. The panel really appreciated the taste and quality of the different components and how the rosemary brought all the flavors together. Seiber remarked that "a lot of effort goes into the appearance of simplicity." Rohn indicated that the same notion holds true with software user interface design. A tremendous amount of work goes into crafting straightforward interfaces, including user research, prototyping, design iterations, and usability studies. Design criticism for food and software interfaces clearly share many similarities. Both areas value expert opinions and user feedback. Both areas understand the importance of great design needing to work well in its context. Last but not least, both food and interaction design criticism value "craveability" and how having users excited about experiencing and enjoying the designs is an important goal. Now if we can just improve the taste of software user interfaces, people may choose to dine on their enterprise applications over a fresh organic salad.

  Read the article

• Nashorn, the rhino in the room

  - by costlow

  Nashorn is a new runtime within JDK 8 that allows developers to run code written in JavaScript and call back and forth with Java. One advantage to the Nashorn scripting engine is that is allows for quick prototyping of functionality or basic shell scripts that use Java libraries. The previous JavaScript runtime, named Rhino, was introduced in JDK 6 (released 2006, end of public updates Feb 2013). Keeping tradition amongst the global developer community, "Nashorn" is the German word for rhino. The Java platform and runtime is an intentional home to many languages beyond the Java language itself. OpenJDK’s Da Vinci Machine helps coordinate work amongst language developers and tool designers and has helped different languages by introducing the Invoke Dynamic instruction in Java 7 (2011), which resulted in two major benefits: speeding up execution of dynamic code, and providing the groundwork for Java 8’s lambda executions. Many of these improvements are discussed at the JVM Language Summit, where language and tool designers get together to discuss experiences and issues related to building these complex components. There are a number of benefits to running JavaScript applications on JDK 8’s Nashorn technology beyond writing scripts quickly: Interoperability with Java and JavaScript libraries. Scripts do not need to be compiled. Fast execution and multi-threading of JavaScript running in Java’s JRE. The ability to remotely debug applications using an IDE like NetBeans, Eclipse, or IntelliJ (instructions on the Nashorn blog). Automatic integration with Java monitoring tools, such as performance, health, and SIEM. In the remainder of this blog post, I will explain how to use Nashorn and the benefit from those features. Nashorn execution environment The Nashorn scripting engine is included in all versions of Java SE 8, both the JDK and the JRE. Unlike Java code, scripts written in nashorn are interpreted and do not need to be compiled before execution. Developers and users can access it in two ways: Users running JavaScript applications can call the binary directly:jre8/bin/jjs This mechanism can also be used in shell scripts by specifying a shebang like #!/usr/bin/jjs Developers can use the API and obtain a ScriptEngine through:ScriptEngine engine = new ScriptEngineManager().getEngineByName("nashorn"); When using a ScriptEngine, please understand that they execute code. Avoid running untrusted scripts or passing in untrusted/unvalidated inputs. During compilation, consider isolating access to the ScriptEngine and using Type Annotations to only allow @Untainted String arguments. One noteworthy difference between JavaScript executed in or outside of a web browser is that certain objects will not be available. For example when run outside a browser, there is no access to a document object or DOM tree. Other than that, all syntax, semantics, and capabilities are present. Examples of Java and JavaScript The Nashorn script engine allows developers of all experience levels the ability to write and run code that takes advantage of both languages. The specific dialect is ECMAScript 5.1 as identified by the User Guide and its standards definition through ECMA international. In addition to the example below, Benjamin Winterberg has a very well written Java 8 Nashorn Tutorial that provides a large number of code samples in both languages. Basic Operations A basic Hello World application written to run on Nashorn would look like this: #!/usr/bin/jjs print("Hello World"); The first line is a standard script indication, so that Linux or Unix systems can run the script through Nashorn. On Windows where scripts are not as common, you would run the script like: jjs helloWorld.js. Receiving Arguments In order to receive program arguments your jjs invocation needs to use the -scripting flag and a double-dash to separate which arguments are for jjs and which are for the script itself:jjs -scripting print.js -- "This will print" #!/usr/bin/jjs var whatYouSaid = $ARG.length==0 ? "You did not say anything" : $ARG[0] print(whatYouSaid); Interoperability with Java libraries (including 3rd party dependencies) Another goal of Nashorn was to allow for quick scriptable prototypes, allowing access into Java types and any libraries. Resources operate in the context of the script (either in-line with the script or as separate threads) so if you open network sockets and your script terminates, those sockets will be released and available for your next run. Your code can access Java types the same as regular Java classes. The “import statements” are written somewhat differently to accommodate for language. There is a choice of two styles: For standard classes, just name the class: var ServerSocket = java.net.ServerSocket For arrays or other items, use Java.type: var ByteArray = Java.type("byte[]")You could technically do this for all. The same technique will allow your script to use Java types from any library or 3rd party component and quickly prototype items. Building a user interface One major difference between JavaScript inside and outside of a web browser is the availability of a DOM object for rendering views. When run outside of the browser, JavaScript has full control to construct the entire user interface with pre-fabricated UI controls, charts, or components. The example below is a variation from the Nashorn and JavaFX guide to show how items work together. Nashorn has a -fx flag to make the user interface components available. With the example script below, just specify: jjs -fx -scripting fx.js -- "My title" #!/usr/bin/jjs -fx var Button = javafx.scene.control.Button; var StackPane = javafx.scene.layout.StackPane; var Scene = javafx.scene.Scene; var clickCounter=0; $STAGE.title = $ARG.length>0 ? $ARG[0] : "You didn't provide a title"; var button = new Button(); button.text = "Say 'Hello World'"; button.onAction = myFunctionForButtonClicking; var root = new StackPane(); root.children.add(button); $STAGE.scene = new Scene(root, 300, 250); $STAGE.show(); function myFunctionForButtonClicking(){   var text = "Click Counter: " + clickCounter;   button.setText(text);   clickCounter++;   print(text); } For a more advanced post on using Nashorn to build a high-performing UI, see JavaFX with Nashorn Canvas example. Interoperable with frameworks like Node, Backbone, or Facebook React The major benefit of any language is the interoperability gained by people and systems that can read, write, and use it for interactions. Because Nashorn is built for the ECMAScript specification, developers familiar with JavaScript frameworks can write their code and then have system administrators deploy and monitor the applications the same as any other Java application. A number of projects are also running Node applications on Nashorn through Project Avatar and the supported modules. In addition to the previously mentioned Nashorn tutorial, Benjamin has also written a post about Using Backbone.js with Nashorn. To show the multi-language power of the Java Runtime, there is another interesting example that unites Facebook React and Clojure on JDK 8’s Nashorn. Summary Nashorn provides a simple and fast way of executing JavaScript applications and bridging between the best of each language. By making the full range of Java libraries to JavaScript applications, and the quick prototyping style of JavaScript to Java applications, developers are free to work as they see fit. Software Architects and System Administrators can take advantage of one runtime and leverage any work that they have done to tune, monitor, and certify their systems. Additional information is available within: The Nashorn Users’ Guide Java Magazine’s article "Next Generation JavaScript Engine for the JVM." The Nashorn team’s primary blog or a very helpful collection of Nashorn links.

  Read the article

• Cost Comparison Hard Disk Drive to Solid State Drive on Price per Gigabyte - dispelling a myth!

  - by tonyrogerson

  It is often said that Hard Disk Drive storage is significantly cheaper per GiByte than Solid State Devices – this is wholly inaccurate within the database space. People need to look at the cost of the complete solution and not just a single component part in isolation to what is really required to meet the business requirement. Buying a single Hitachi Ultrastar 600GB 3.5” SAS 15Krpm hard disk drive will cost approximately £239.60 (http://scan.co.uk, 22nd March 2012) compared to an OCZ 600GB Z-Drive R4 CM84 PCIe costing £2,316.54 (http://scan.co.uk, 22nd March 2012); I’ve not included FusionIO ioDrive because there is no public pricing available for it – something I never understand and personally when companies do this I immediately think what are they hiding, luckily in FusionIO’s case the product is proven though is expensive compared to OCZ enterprise offerings. On the face of it the single 15Krpm hard disk has a price per GB of £0.39, the SSD £3.86; this is what you will see in the press and this is what sales people will use in comparing the two technologies – do not be fooled by this bullshit people! What is the requirement? The requirement is the database will have a static size of 400GB kept static through archiving so growth and trim will balance the database size, the client requires resilience, there will be several hundred call centre staff querying the database where queries will read a small amount of data but there will be no hot spot in the data so the randomness will come across the entire 400GB of the database, estimates predict that the IOps required will be approximately 4,000IOps at peak times, because it’s a call centre system the IO latency is important and must remain below 5ms per IO. The balance between read and write is 70% read, 30% write. The requirement is now defined and we have three of the most important pieces of the puzzle – space required, estimated IOps and maximum latency per IO. Something to consider with regard SQL Server; write activity requires synchronous IO to the storage media specifically the transaction log; that means the write thread will wait until the IO is completed and hardened off until the thread can continue execution, the requirement has stated that 30% of the system activity will be write so we can expect a high amount of synchronous activity. The hardware solution needs to be defined; two possible solutions: hard disk or solid state based; the real question now is how many hard disks are required to achieve the IO throughput, the latency and resilience, ditto for the solid state. Hard Drive solution On a test on an HP DL380, P410i controller using IOMeter against a single 15Krpm 146GB SAS drive, the throughput given on a transfer size of 8KiB against a 40GiB file on a freshly formatted disk where the partition is the only partition on the disk thus the 40GiB file is on the outer edge of the drive so more sectors can be read before head movement is required: For 100% sequential IO at a queue depth of 16 with 8 worker threads 43,537 IOps at an average latency of 2.93ms (340 MiB/s), for 100% random IO at the same queue depth and worker threads 3,733 IOps at an average latency of 34.06ms (34 MiB/s). The same test was done on the same disk but the test file was 130GiB: For 100% sequential IO at a queue depth of 16 with 8 worker threads 43,537 IOps at an average latency of 2.93ms (340 MiB/s), for 100% random IO at the same queue depth and worker threads 528 IOps at an average latency of 217.49ms (4 MiB/s). From the result it is clear random performance gets worse as the disk fills up – I’m currently writing an article on short stroking which will cover this in detail. Given the work load is random in nature looking at the random performance of the single drive when only 40 GiB of the 146 GB is used gives near the IOps required but the latency is way out. Luckily I have tested 6 x 15Krpm 146GB SAS 15Krpm drives in a RAID 0 using the same test methodology, for the same test above on a 130 GiB for each drive added the performance boost is near linear, for each drive added throughput goes up by 5 MiB/sec, IOps by 700 IOps and latency reducing nearly 50% per drive added (172 ms, 94 ms, 65 ms, 47 ms, 37 ms, 30 ms). This is because the same 130GiB is spread out more as you add drives 130 / 1, 130 / 2, 130 / 3 etc. so implicit short stroking is occurring because there is less file on each drive so less head movement required. The best latency is still 30 ms but we have the IOps required now, but that’s on a 130GiB file and not the 400GiB we need. Some reality check here: a) the drive randomness is more likely to be 50/50 and not a full 100% but the above has highlighted the effect randomness has on the drive and the more a drive fills with data the worse the effect. For argument sake let us assume that for the given workload we need 8 disks to do the job, for resilience reasons we will need 16 because we need to RAID 1+0 them in order to get the throughput and the resilience, RAID 5 would degrade performance. Cost for hard drives: 16 x £239.60 = £3,833.60 For the hard drives we will need disk controllers and a separate external disk array because the likelihood is that the server itself won’t take the drives, a quick spec off DELL for a PowerVault MD1220 which gives the dual pathing with 16 disks 146GB 15Krpm 2.5” disks is priced at £7,438.00, note its probably more once we had two controller cards to sit in the server in, racking etc. Minimum cost taking the DELL quote as an example is therefore: {Cost of Hardware} / {Storage Required} £7,438.60 / 400 = £18.595 per GB £18.59 per GiB is a far cry from the £0.39 we had been told by the salesman and the myth. Yes, the storage array is composed of 16 x 146 disks in RAID 10 (therefore 8 usable) giving an effective usable storage availability of 1168GB but the actual storage requirement is only 400 and the extra disks have had to be purchased to get the  IOps up. Solid State Drive solution A single card significantly exceeds the IOps and latency required, for resilience two will be required. ( £2,316.54 * 2 ) / 400 = £11.58 per GB With the SSD solution only two PCIe sockets are required, no external disk units, no additional controllers, no redundant controllers etc. Conclusion I hope by showing you an example that the myth that hard disk drives are cheaper per GiB than Solid State has now been dispelled - £11.58 per GB for SSD compared to £18.59 for Hard Disk. I’ve not even touched on the running costs, compare the costs of running 18 hard disks, that’s a lot of heat and power compared to two PCIe cards!Just a quick note: I've left a fair amount of information out due to this being a blog! If in doubt, email me :)I'll also deal with the myth that SSD's wear out at a later date as well - that's just way over done still, yes, 5 years ago, but now - no.

  Read the article

• Contracting as a Software Developer in the UK

  - by Frez

  Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Having had some 15 years’ experience of working as a software contractor, I am often asked by developers who work as permanent employees (permies) about the pros and cons of working as a software consultant through my own limited company and whether the move would be a good one for them. Whilst it is possible to contract using other financial vehicles such as umbrella companies, this article will only consider limited companies as that is what I have experience of using. Contracting or consultancy requires a different mind-set from being a permanent member of staff, and not all developers are capable of this shift in attitude. Whilst you can look forward to an increase in the money you take home, there are real risks and expenses you would not normally be exposed to as a permie. So let us have a look at the pros and cons: Pros: More money There is no doubt that whilst you are working on contracts you will earn significantly more than you would as a permanent employee. Furthermore, working through a limited company is more tax efficient. Less politics You really have no need to involve yourself in office politics. When the end of the day comes you can go home and not think or worry about the power struggles within the company you are contracted to. Your career progression is not tied to the company. Expenses from gross income All your expenses of trading as a business will come out of your company’s gross income, i.e. before tax. This covers travelling expenses provided you have not been at the same client/location for more than two years, internet subscriptions, professional subscriptions, software, hardware, accountancy services and so on. Cons: Work is more transient Contracts typically range from a couple of weeks to a year, although will most likely start at 3 months. However, most contracts are extended either because the project you have been brought in to help with takes longer to deliver than expected, the client decides they can use you on other aspects of the project, or the client decides they would like to use you on other projects. The temporary nature of the work means that you will have down-time between contracts while you secure new opportunities during which time your company will have no income. You may need to attend several interviews before securing a new contract. Accountancy expenses Your company is a separate entity and there are accountancy requirements which, unless you like paperwork, means your company will need to appoint an accountant to prepare your company’s accounts. It may also be worth purchasing some accountancy software, so talk to your accountant about this as they may prefer you to use a particular software package so they can integrate it with their systems. VAT You will need to register your company for VAT. This is tax neutral for you as the VAT you charge your clients you will pass onto the government less any VAT you are reclaiming from expenses, but it is additional paperwork to undertake each quarter. It is worth checking out the Fixed Rate VAT Scheme that is available, particularly after the initial expenses of setting up your company are over. No training Clients take you on based on your skills, not to train you when they will lose that investment at the end of the contract, so understand that it is unlikely you will receive any training funded by a client. However, learning new skills during a contract is possible and you may choose to accept a contract on a lower rate if this is guaranteed as it will help secure future contracts. No financial extras You will have no free pension, life, accident, sickness or medical insurance unless you choose to purchase them yourself. A financial advisor can give you all the necessary advice in this area, and it is worth taking seriously. A year after I started as a consultant I contracted a serious illness, this kept me off work for over two months, my client was very understanding and it could have been much worse, so it is worth considering what your options might be in the case of illness, death and retirement. Agencies Whilst it is possible to work directly for end clients there are pros and cons of working through an agency.  The main advantage is cash flow, you invoice the agency and they typically pay you within a week, whereas working directly for a client could have you waiting up to three months to be paid. The downside of working for agencies, especially in the current difficult times, is that they may go out of business and you then have difficulty getting the money you are owed. Tax investigation It is possible that the Inland Revenue may decide to investigate your company for compliance with tax law. Insurance is available to cover you for this. My personal recommendation would be to join the PCG as this insurance is included as a benefit of membership, Professional Indemnity Some agencies require that you are covered by professional indemnity insurance; this is a cost you would not incur as a permie. Travel Unless you live in an area that has an abundance of opportunities, such as central London, it is likely that you will be travelling further, longer and with more expense than if you were permanently employed at a local company. This not only affects you monetarily, but also your quality of life and the ability to keep fit and healthy. Obtaining finance If you want to secure a mortgage on a property it can be more difficult or expensive, especially if you do not have three years of audited accounts to show a mortgage lender.   Caveat This post is my personal opinion and should not be used as a definitive guide or recommendation to contracting and whether it is suitable for you as an individual, i.e. I accept no responsibility if you decide to take up contracting based on this post and you fare badly for whatever reason.

  Read the article

• Disk Drive not working

  - by user287681

  The CD/DVD drive on my sisters' (I'm helping her shift from Win. XP (now officially deprecated by Microsoft) to Ubuntu) system. Now, it may end up being a failed attempt, all together (Almost the whole last year (when she's been on XP) the disk drive hasn't (not even powering on) been working.), I just want to make sure I've explored every remote possibility. Because I figure, "Huh, now that I've got Ubuntu running, instead of XP, that (just) might make a difference.". I have tried using the sudo lshw command in the terminal, to (seemingly) no avil, but, who knows, you might be able to make something out of it. Here's the output: kyra@kyra-Satellite-P105:~$ sudo lshw [sudo] password for kyra: kyra-satellite-p105 description: Notebook product: Satellite P105 () vendor: TOSHIBA version: PSPA0U-0TN01M serial: 96084354W width: 64 bits capabilities: smbios-2.4 dmi-2.4 vsyscall32 configuration: administrator_password=disabled boot=oem-specific chassis=notebook frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=00900559-F88E-D811-82E0-00163680E992 *-core description: Motherboard product: Satellite P105 vendor: TOSHIBA physical id: 0 version: Not Applicable serial: 1234567890 *-firmware description: BIOS vendor: TOSHIBA physical id: 0 version: V4.70 date: 01/19/20092 size: 92KiB capabilities: isa pci pcmcia pnp upgrade shadowing escd cdboot acpi usb biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM)2 CPU T5 slot: U2E1 size: 1667MHz capacity: 1667MHz width: 64 bits clock: 166MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1 Cache size: 16KiB capacity: 16KiB capabilities: asynchronous internal write-back *-cache:1 description: L2 cache physical id: 6 slot: L2 Cache size: 2MiB capabilities: burst external write-back *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB capacity: 3GiB *-bank:0 description: SODIMM DDR2 Synchronous physical id: 0 slot: M1 size: 1GiB width: 64 bits *-bank:1 description: SODIMM DDR2 Synchronous physical id: 1 slot: M2 size: 1GiB width: 64 bits *-pci description: Host bridge product: Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display:0 description: VGA compatible controller product: Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0200000-d027ffff ioport:1800(size=8) memory:c0000000-cfffffff memory:d0300000-d033ffff *-display:1 UNCLAIMED description: Display controller product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:d0280000-d02fffff *-multimedia description: Audio device product: NM10/ICH7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d0340000-d0343fff *-pci:0 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:84000000-841fffff ioport:84200000(size=2097152) *-pci:1 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:4000(size=4096) memory:84400000-846fffff ioport:84700000(size=2097152) *-network description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d6:d2:35 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.13.0-29-generic firmware=15.32.2.9 ip=10.110.20.157 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:43 memory:84400000-84400fff *-pci:2 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:5000(size=4096) memory:84900000-84afffff ioport:84b00000(size=2097152) *-usb:0 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:1820(size=32) *-usb:1 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:1840(size=32) *-usb:2 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:1860(size=32) *-usb:3 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:1880(size=32) *-usb:4 description: USB controller product: NM10/ICH7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:d0544000-d05443ff *-pci:3 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list resources: ioport:2000(size=4096) memory:d0000000-d00fffff ioport:80000000(size=67108864) *-pcmcia description: CardBus bridge product: PCIxx12 Cardbus Controller vendor: Texas Instruments physical id: 4 bus info: pci@0000:0a:04.0 version: 00 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 resources: irq:17 memory:d0004000-d0004fff ioport:2400(size=256) ioport:2800(size=256) memory:80000000-83ffffff memory:88000000-8bffffff *-firewire description: FireWire (IEEE 1394) product: PCIxx12 OHCI Compliant IEEE 1394 Host Controller vendor: Texas Instruments physical id: 4.1 bus info: pci@0000:0a:04.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm ohci bus_master cap_list configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=3 resources: irq:17 memory:d0007000-d00077ff memory:d0000000-d0003fff *-storage description: Mass storage controller product: 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) vendor: Texas Instruments physical id: 4.2 bus info: pci@0000:0a:04.2 version: 00 width: 32 bits clock: 33MHz capabilities: storage pm bus_master cap_list configuration: driver=tifm_7xx1 latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0005000-d0005fff *-generic description: SD Host controller product: PCIxx12 SDA Standard Compliant SD Host Controller vendor: Texas Instruments physical id: 4.3 bus info: pci@0000:0a:04.3 version: 00 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=sdhci-pci latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0007800-d00078ff *-network description: Ethernet interface product: PRO/100 VE Network Connection vendor: Intel Corporation physical id: 8 bus info: pci@0000:0a:08.0 logical name: eth0 version: 02 serial: 00:16:36:80:e9:92 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s resources: irq:20 memory:d0006000-d0006fff ioport:2000(size=64) *-isa description: ISA bridge product: 82801GBM (ICH7-M) LPC Interface Bridge vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide description: IDE interface product: 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:18b0(size=16) *-serial UNCLAIMED description: SMBus product: NM10/ICH7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:18c0(size=32) *-scsi physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: ST9250421AS vendor: Seagate physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: SD13 serial: 5TH0B2HB size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000d7fd5 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 13bb4bdd-8cc9-40e2-a490-dbe436c2a02d size: 230GiB capacity: 230GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2014-06-01 17:37:01 filesystem=ext4 lastmountpoint=/ modified=2014-06-01 21:15:21 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2014-06-01 21:15:21 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 2037MiB capacity: 2037MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 2037MiB capabilities: nofs *-remoteaccess UNCLAIMED vendor: Intel physical id: 1 capabilities: inbound kyra@kyra-Satellite-P105:~$

  Read the article

• Next-Generation Data Integration on Oracle Exadata

  - by Julien Testut

  Normal 0 false false false EN-US X-NONE X-NONE Companies are currently faced with increasing data volumes and retention times while simultaneously batch windows are shrinking. In the ‘Next-Generation Data Integration on Oracle Exadata’ session we will be discussing how Oracle with its innovative Data Integration solution along with Exadata can help companies tackle that challenge. Oracle Data Integrator and Oracle GoldenGate provide industry-leading performance and scalability for data integration on Oracle Exadata. They are both uniquely designed to take full advantage of the power of the database and to eliminate unnecessary middle-tier components which can often be bottlenecks for data movement and transformation. Combined with the extreme performance provided by Exadata our Data Integration products help companies move towards a more efficient and flexible data integration infrastructure. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} If you’re interested in hearing more about how our customers maximize the performance of their Exadata systems while minimizing batch windows, all without adding more hardware resources join us for the following session: Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Next-Generation Data Integration on Oracle Exadata  Thursday October, 4th - 11:15AM - 12:15PM Moscone West – Room 3005 We also have many other exciting sessions including 'Oracle Data Integrator Product Update and Future Strategy' on October 2nd at 1:15PM in Moscone West Room 3005. In this session we will discuss the ODI roadmap and its integration with engineered systems such as the Oracle Big Data Appliance. It's a session not to be missed! You can find a list of all the Data Integration sessions happening at Oracle OpenWorld in this document: Focus On Data Integration. If you will not be able to come to OpenWorld, for more information please check out our data sheet Oracle Data Integration Solutions and the Oracle Exadata Database Machine. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Automating deployments with the SQL Compare command line

  - by Jonathan Hickford

  In my previous article, “Five Tips to Get Your Organisation Releasing Software Frequently” I looked at how teams can automate processes to speed up release frequency. In this post, I’m looking specifically at automating deployments using the SQL Compare command line. SQL Compare compares SQL Server schemas and deploys the differences. It works very effectively in scenarios where only one deployment target is required – source and target databases are specified, compared, and a change script is automatically generated and applied. But if multiple targets exist, and pressure to increase the frequency of releases builds, this solution quickly becomes unwieldy.   This is where SQL Compare’s command line comes into its own. I’ve put together a PowerShell script that loops through the Servers table and pulls out the server and database, these are then passed to sqlcompare.exe to be used as target parameters. In the example the source database is a scripts folder, a folder structure of scripted-out database objects used by both SQL Source Control and SQL Compare. The script can easily be adapted to use schema snapshots.     -- Create a DeploymentTargets database and a Servers table CREATE DATABASE DeploymentTargets GO USE DeploymentTargets GO CREATE TABLE [dbo].[Servers]( [id] [int] IDENTITY(1,1) NOT NULL, [serverName] [nvarchar](50) NULL, [environment] [nvarchar](50) NULL, [databaseName] [nvarchar](50) NULL, CONSTRAINT [PK_Servers] PRIMARY KEY CLUSTERED ([id] ASC) ) GO -- Now insert your target server and database details INSERT INTO dbo.Servers ( serverName , environment , databaseName) VALUES ( N'myserverinstance' , N'myenvironment1' , N'mydb1') INSERT INTO dbo.Servers ( serverName , environment , databaseName) VALUES ( N'myserverinstance' , N'myenvironment2' , N'mydb2') Here’s the PowerShell script you can adapt for yourself as well. # We're holding the server names and database names that we want to deploy to in a database table. # We need to connect to that server to read these details $serverName = "" $databaseName = "DeploymentTargets" $authentication = "Integrated Security=SSPI" #$authentication = "User Id=xxx;PWD=xxx" # If you are using database authentication instead of Windows authentication. # Path to the scripts folder we want to deploy to the databases $scriptsPath = "SimpleTalk" # Path to SQLCompare.exe $SQLComparePath = "C:\Program Files (x86)\Red Gate\SQL Compare 10\sqlcompare.exe" # Create SQL connection string, and connection $ServerConnectionString = "Data Source=$serverName;Initial Catalog=$databaseName;$authentication" $ServerConnection = new-object system.data.SqlClient.SqlConnection($ServerConnectionString); # Create a Dataset to hold the DataTable $dataSet = new-object "System.Data.DataSet" "ServerList" # Create a query $query = "SET NOCOUNT ON;" $query += "SELECT serverName, environment, databaseName " $query += "FROM dbo.Servers; " # Create a DataAdapter to populate the DataSet with the results $dataAdapter = new-object "System.Data.SqlClient.SqlDataAdapter" ($query, $ServerConnection) $dataAdapter.Fill($dataSet) | Out-Null # Close the connection $ServerConnection.Close() # Populate the DataTable $dataTable = new-object "System.Data.DataTable" "Servers" $dataTable = $dataSet.Tables[0] #For every row in the DataTable $dataTable | FOREACH-OBJECT { "Server Name: $($_.serverName)" "Database Name: $($_.databaseName)" "Environment: $($_.environment)" # Compare the scripts folder to the database and synchronize the database to match # NB. Have set SQL Compare to abort on medium level warnings. $arguments = @("/scripts1:$($scriptsPath)", "/server2:$($_.serverName)", "/database2:$($_.databaseName)", "/AbortOnWarnings:Medium") # + @("/sync" ) # Commented out the 'sync' parameter for safety, write-host $arguments & $SQLComparePath $arguments "Exit Code: $LASTEXITCODE" # Some interesting variations # Check that every database matches a folder. # For example this might be a pre-deployment step to validate everything is at the same baseline state. # Or a post deployment script to validate the deployment worked. # An exit code of 0 means the databases are identical. # # $arguments = @("/scripts1:$($scriptsPath)", "/server2:$($_.serverName)", "/database2:$($_.databaseName)", "/Assertidentical") # Generate a report of the difference between the folder and each database. Generate a SQL update script for each database. # For example use this after the above to generate upgrade scripts for each database # Examine the warnings and the HTML diff report to understand how the script will change objects # #$arguments = @("/scripts1:$($scriptsPath)", "/server2:$($_.serverName)", "/database2:$($_.databaseName)", "/ScriptFile:update_$($_.environment+"_"+$_.databaseName).sql", "/report:update_$($_.environment+"_"+$_.databaseName).html" , "/reportType:Interactive", "/showWarnings", "/include:Identical") } It’s worth noting that the above example generates the deployment scripts dynamically. This approach should be problem-free for the vast majority of changes, but it is still good practice to review and test a pre-generated deployment script prior to deployment. An alternative approach would be to pre-generate a single deployment script using SQL Compare, and run this en masse to multiple targets programmatically using sqlcmd, or using a tool like SQL Multi Script.  You can use the /ScriptFile, /report, and /showWarnings flags to generate change scripts, difference reports and any warnings.  See the commented out example in the PowerShell: #$arguments = @("/scripts1:$($scriptsPath)", "/server2:$($_.serverName)", "/database2:$($_.databaseName)", "/ScriptFile:update_$($_.environment+"_"+$_.databaseName).sql", "/report:update_$($_.environment+"_"+$_.databaseName).html" , "/reportType:Interactive", "/showWarnings", "/include:Identical") There is a drawback of running a pre-generated deployment script; it assumes that a given database target hasn’t drifted from its expected state. Often there are (rightly or wrongly) many individuals within an organization who have permissions to alter the production database, and changes can therefore be made outside of the prescribed development processes. The consequence is that at deployment time, the applied script has been validated against a target that no longer represents reality. The solution here would be to add a check for drift prior to running the deployment script. This is achieved by using sqlcompare.exe to compare the target against the expected schema snapshot using the /Assertidentical flag. Should this return any differences (sqlcompare.exe Exit Code 79), a drift report is outputted instead of executing the deployment script.  See the commented out example. # $arguments = @("/scripts1:$($scriptsPath)", "/server2:$($_.serverName)", "/database2:$($_.databaseName)", "/Assertidentical") Any checks and processes that should be undertaken prior to a manual deployment, should also be happen during an automated deployment. You might think about triggering backups prior to deployment – even better, automate the verification of the backup too.   You can use SQL Compare’s command line interface along with PowerShell to automate multiple actions and checks that you need in your deployment process. Automation is a practical solution where multiple targets and a higher release cadence come into play. As we know, with great power comes great responsibility – responsibility to ensure that the necessary checks are made so deployments remain trouble-free.  (The code sample supplied in this post automates the simple dynamic deployment case – if you are considering more advanced automation, e.g. the drift checks, script generation, deploying to large numbers of targets and backup/verification, please email me at [email protected] for further script samples or if you have further questions)

  Read the article

• The 20 Most Important Keyboard Shortcuts For Windows PCs

  - by Chris Hoffman

  Keyboard shortcuts are practically essential for using any type of PC. They’ll speed up almost everything you do. But long lists of keyboard shortcuts can quickly become overwhelming if you’re just getting started. This list will cover the most useful keyboard shortcuts that every Windows user should know. If you haven’t used keyboard shortcuts much, these will show you just how useful keyboard shortcuts can be. Windows Key + Search The Windows key is particularly important on Windows 8 — especially before Windows 8.1 — because it allows you to quickly return to the Start screen. On Windows 7, it opens the Start menu. Either way, you can start typing immediately after you press the Windows key to search for programs, settings, and files. For example, if you want to launch Firefox, you can press the Windows key, start typing the word Firefox, and press Enter when the Firefox shortcut appears. It’s a quick way to launch programs, open files, and locate Control Panel options without even touching your mouse and without digging through a cluttered Start menu. You can also use the arrow keys to select the shortcut you want to launch before pressing Enter. Copy, Cut, Paste Copy, Cut, and Paste are extremely important keyboard shortcuts for text-editing. If you do any typing on your computer, you probably use them. These options can be accessed using the mouse, either by right-clicking on selected text or opening the application’s Edit menu, but this is the slowest way to do it. After selecting some text, press Ctrl+C to copy it or Ctrl+X to cut it. Position the cursor where you want the text and use Ctrl+V to paste it. These shortcuts can save you a huge amount of time over using the mouse. Search the Current Page or File To quickly perform a search in the current application — whether you’re in a web browser, PDF viewer, document editor, or almost any other type of application — press Ctrl+F. The application’s search (or “Find”) feature will pop up, and you can instantly start typing a phrase you want to search for. You can generally press Enter to  go to the next appearance of the word or phrase in the document, quickly searching through it for what you’re interested in. Switch Between Applications and Tabs Rather than clicking buttons on your taskbar, Alt+Tab is a very quick way to switch between running applications. Windows orders the list of open windows by the order you accessed them, so if you’re only using two different applications, you can just press Alt+Tab to quickly switch between them. If switching between more than two windows, you’ll have to hold the Alt key and press Tab repeatedly to toggle through the list of open windows. If you miss the window you want, you can always press Alt+Shift+Tab to move through the list in reverse. To move between tabs in an application — such as the browser tabs in your web browser — press Ctrl+Tab. Ctrl+Shift+Tab will move through tabs in reverse. Quickly Print If you’re the kind of person who still prints things, you can quickly open the print window by pressing Ctrl+P. This can be faster than hunting down the Print option in every program you want to print something from. Basic Browser Shortcuts Web browser shortcuts can save you tons of time, too. Ctrl+T is a very useful one, as it will open a new tab with the address bar focused, so you can quickly press Ctrl +T, type a search phrase or web address, and press Enter to go there. To go back or forward while browsing, hold the Ctrl key and press the left or right arrow keys. If you’d just like to focus your web browser’s address bar so you can type a new web address or search without opening a new tab, press Ctrl + L. You can then start typing something and press Enter. Close Tabs and Windows To quickly close the current application, press Alt+F4. This works on the desktop and even in new Windows 8-style applications. To quickly close the current browser tab or document, press Ctrl+W. This will often close the current window if there are no other tabs open. Lock Your Computer When you’re done using your computer and want to step away, you may want to lock it. People won’t be able to log in and access your desktop unless they know your password. You can do this from the Start menu or Start screen, but the fastest way to lock your screen is by quickly pressing Windows Key + L before you get up. Access the Task Manager Ctrl+Alt+Delete will take you to a screen that allows you to quickly launch the Task Manager or perform other operations, such as signing out. This is particularly useful because if can be used to recover from situations where your computer doesn’t appear responsive or isn’t accepting input. For example, if a full-screen game becomes unresponsive, Ctrl+Alt+Delete will often allow you to escape from it and end it via the Task Manager. Windows 8 Shortcuts On Windows 8 PCs, there are other very important keyboard shortcuts. Windows Key + C will open your Charms bar, while Windows Key + Tab will open the new App Switcher. These keyboard shortcuts will allow you to avoid the hot corners, which can be tedious to use with a mouse. On the desktop side, Windows Key + D will take you back to the desktop from anywhere. Windows Key + X will open a special “power user menu” that gives you quick access to options that are hidden in the new Windows 8 interface, including Shut Down, Restart, and Control Panel. If you’re interested in learning more keyboard shortcuts, be sure to check our longer lists of 47 keyboard shortcuts that work in all web browsers and 42+ keyboard shortcuts to speed up text-editing. Image Credit: Jeroen Bennink on Flickr     

  Read the article

• Developing a Cost Model for Cloud Applications

  - by BuckWoody

  Note - please pay attention to the date of this post. As much as I attempt to make the information below accurate, the nature of distributed computing means that components, units and pricing will change over time. The definitive costs for Microsoft Windows Azure and SQL Azure are located here, and are more accurate than anything you will see in this post: http://www.microsoft.com/windowsazure/offers/  When writing software that is run on a Platform-as-a-Service (PaaS) offering like Windows Azure / SQL Azure, one of the questions you must answer is how much the system will cost. I will not discuss the comparisons between on-premise costs (which are nigh impossible to calculate accurately) versus cloud costs, but instead focus on creating a general model for estimating costs for a given application. You should be aware that there are (at this writing) two billing mechanisms for Windows and SQL Azure: “Pay-as-you-go” or consumption, and “Subscription” or commitment. Conceptually, you can consider the former a pay-as-you-go cell phone plan, where you pay by the unit used (at a slightly higher rate) and the latter as a standard cell phone plan where you commit to a contract and thus pay lower rates. In this post I’ll stick with the pay-as-you-go mechanism for simplicity, which should be the maximum cost you would pay. From there you may be able to get a lower cost if you use the other mechanism. In any case, the model you create should hold. Developing a good cost model is essential. As a developer or architect, you’ll most certainly be asked how much something will cost, and you need to have a reliable way to estimate that. Businesses and Organizations have been used to paying for servers, software licenses, and other infrastructure as an up-front cost, and power, people to the systems and so on as an ongoing (and sometimes not factored) cost. When presented with a new paradigm like distributed computing, they may not understand the true cost/value proposition, and that’s where the architect and developer can guide the conversation to make a choice based on features of the application versus the true costs. The two big buckets of use-types for these applications are customer-based and steady-state. In the customer-based use type, each successful use of the program results in a sale or income for your organization. Perhaps you’ve written an application that provides the spot-price of foo, and your customer pays for the use of that application. In that case, once you’ve estimated your cost for a successful traversal of the application, you can build that into the price you charge the user. It’s a standard restaurant model, where the price of the meal is determined by the cost of making it, plus any profit you can make. In the second use-type, the application will be used by a more-or-less constant number of processes or users and no direct revenue is attached to the system. A typical example is a customer-tracking system used by the employees within your company. In this case, the cost model is often created “in reverse” - meaning that you pilot the application, monitor the use (and costs) and that cost is held steady. This is where the comparison with an on-premise system becomes necessary, even though it is more difficult to estimate those on-premise true costs. For instance, do you know exactly how much cost the air conditioning is because you have a team of system administrators? This may sound trivial, but that, along with the insurance for the building, the wiring, and every other part of the system is in fact a cost to the business. There are three primary methods that I’ve been successful with in estimating the cost. None are perfect, all are demand-driven. The general process is to lay out a matrix of: components units cost per unit and then multiply that times the usage of the system, based on which components you use in the program. That sounds a bit simplistic, but using those metrics in a calculation becomes more detailed. In all of the methods that follow, you need to know your application. The components for a PaaS include computing instances, storage, transactions, bandwidth and in the case of SQL Azure, database size. In most cases, architects start with the first model and progress through the other methods to gain accuracy. Simple Estimation The simplest way to calculate costs is to architect the application (even UML or on-paper, no coding involved) and then estimate which of the components you’ll use, and how much of each will be used. Microsoft provides two tools to do this - one is a simple slider-application located here: http://www.microsoft.com/windowsazure/pricing-calculator/  The other is a tool you download to create an “Return on Investment” (ROI) spreadsheet, which has the advantage of leading you through various questions to estimate what you plan to use, located here: https://roianalyst.alinean.com/msft/AutoLogin.do?d=176318219048082115  You can also just create a spreadsheet yourself with a structure like this: Program Element Azure Component Unit of Measure Cost Per Unit Estimated Use of Component Total Cost Per Component Cumulative Cost               Of course, the consideration with this model is that it is difficult to predict a system that is not running or hasn’t even been developed. Which brings us to the next model type. Measure and Project A more accurate model is to actually write the code for the application, using the Software Development Kit (SDK) which can run entirely disconnected from Azure. The code should be instrumented to estimate the use of the application components, logging to a local file on the development system. A series of unit and integration tests should be run, which will create load on the test system. You can use standard development concepts to track this usage, and even use Windows Performance Monitor counters. The best place to start with this method is to use the Windows Azure Diagnostics subsystem in your code, which you can read more about here: http://blogs.msdn.com/b/sumitm/archive/2009/11/18/introducing-windows-azure-diagnostics.aspx This set of API’s greatly simplifies tracking the application, and in fact you can use this information for more than just a cost model. After you have the tracking logs, you can plug the numbers into ay of the tools above, which should give a representative cost or in some cases a unit cost. The consideration with this model is that the SDK fabric is not a one-to-one comparison with performance on the actual Windows Azure fabric. Those differences are usually smaller, but they do need to be considered. Also, you may not be able to accurately predict the load on the system, which might lead to an architectural change, which changes the model. This leads us to the next, most accurate method for a cost model. Sample and Estimate Using standard statistical and other predictive math, once the application is deployed you will get a bill each month from Microsoft for your Azure usage. The bill is quite detailed, and you can export the data from it to do analysis, and using methods like regression and so on project out into the future what the costs will be. I normally advise that the architect also extrapolate a unit cost from those metrics as well. This is the information that should be reported back to the executives that pay the bills: the past cost, future projected costs, and unit cost “per click” or “per transaction”, as your case warrants. The challenge here is in the model itself - statistical methods are not foolproof, and the larger the sample (in this case I recommend the entire population, not a smaller sample) is key. References and Tools Articles: http://blogs.msdn.com/b/patrick_butler_monterde/archive/2010/02/10/windows-azure-billing-overview.aspx http://technet.microsoft.com/en-us/magazine/gg213848.aspx http://blog.codingoutloud.com/2011/06/05/azure-faq-how-much-will-it-cost-me-to-run-my-application-on-windows-azure/ http://blogs.msdn.com/b/johnalioto/archive/2010/08/25/10054193.aspx http://geekswithblogs.net/iupdateable/archive/2010/02/08/qampa-how-can-i-calculate-the-tco-and-roi-when.aspx   Other Tools: http://cloud-assessment.com/ http://communities.quest.com/community/cloud_tools

  Read the article

• Don't Miss the Primavera Track Call for Presentations

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} COLLABORATE 13 Do you have first-hand experience with Oracle Primavera that will benefit others in the Primavera community? Can your insights save another company from learning an expensive lesson? Do you have a success story to tell?  The COLLABORATE 13 – Primavera Track Call for Presentations is now open! April 7–11, 2013 in Denver, Colorado, is the premier event for Primavera and Unifier power-users to learn best practices from successful customers as well as hear details on the latest product functionality from the Primavera team. With over 50 sessions dedicated to Primavera products, users will also be able to learn about Primavera's complete product suite and network with other customers and partners within the Primavera community. Customers can also attend hundreds of sessions on Oracle's complete product suite. Share your Primavera success story by submitting a presentation proposal. Deadline for submissions: Wednesday, October 31, 2012. The Primavera presence has been growing at Collaborate year over year, with 50+ sessions and 400 customers in attendance last year – but we want this year’s track to be even bigger and better so please submit a session! Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Solaris 11 Live CD alapú telepítés

  - by AndrasF

  Az elozo részben megigért két telepítési eljárás helyett kénytelen vagyok ebben a bejegyzésben kizárólag a Live CD-s változattal foglalkozni. Korábban nem gondoltam, hogy ennek bemutatása is több, mint 50 képernyo kimenetet igényel, ezért változtatnom kellett a korábbi tervezeten. A Solaris 11 Live CD-s telepítés elsosorban az asztali (desktop) felhasználók igényeit veszi figyelembe és kizárólag x86-os architektúrájú gépeken támogatott (annak ellenére, hogy SPARC-os rendszerek is rendelkeznek grafikus kártyával - pl. T4-1).A folyamat két részre bontható: eloször a vendéggép kerül kialakítása VirtualBox környezetben, majd ezt követi a Solaris 11-es telepítése virtuális gépre. HCL és segédprogramok (DDT, DDU) Mielott telepíteni szeretnénk a Solaris operációs rendszert, célszeru tájékozódni fizikai rendszerünk támogatottságáról. Erre jól használható a már említett hardver kompatibilitási (HCL) lista, vagy az alábbi két segédprogram: Device Detection Tool Device Driver Utility Mindkét alkalmazás képes rendszerünk hardver komponenseit feltérképezni és ellenorizni azok meghajtóprogram (driver) ellátottságát. Eltérés köztük abban nyilvánul meg, hogy míg a DDT futtatásához Java szükséges, addig a DDU Solarist igényel. Ez utóbbiról a telepítés során röviden szó fog esni. Telepíto készletek letöltési helye Hálózati installációtól eltekintve (*) telepítokészletre van szükségünk, mely az alábbi oldalról töltheto le. Célszeru letöltenünk mindhárom állományt és a csomagokat tartalmazó ún. repository médiát (a következo felsorolás utolsó eleme) is: sol-11-1111-live-x86.iso sol-11-1111-text-x86.iso sol-11-1111-ai-x86.iso sol-11-1111-repo-full.iso Az elso három változat indítható USB formátumban is rendelkezésre áll - ekkor iso végzodés helyett usb található a fájlnevek végén. Rövid utalást az egyes készletek feladatáról az elozo blog bejegyzés tartalmaz (link). Amennyiben SPARC architektúrájú rendszerre szeretnénk a telepítést végezni, 'x86' helyett a 'sparc' szöveget tartalmazó állományokra lesz szükség. (*) - arra is lehetoség van, hogy AI készletrol történo indítás segítségével végezzük a hálózaton keresztül történo telepítést. Ez akkor fontos, ha célgépünkön nincs PXE (Preboot Execution Environment) boot támogatás. VirtualBox konfigurálás Külön fizikai eszköz felhasználása nélkül virtuális környezetben is használható a Solaris 11, mint vendéggép. A VirtualBox használatával erre kényelmes lehetoség kínálkozik. Gazdagépünknek (Windows, Unix, Linux) megfelelo telepíto program, vagy programcsomag (jelenleg a 4.1.16-os verzió a legfrissebb változat) és az installációt is taglaló felhasználói kézikönyv letöltheto a termék oldaláról. A sikeres telepítést követoen az alábbi lépések során jutunk el az új virtuális gép kialakulásáig: 1. A VBox indítása után a központi ablak megmutatja a már létezo virtuális gépeinket (Sol11demo, Sol11u1b07, Sol11.1B16, Sun_ZFS_Storage_7000) és az aktuálisan kiválasztott egyed (Sol11demo) fobb jellemzoit (megnevezés, memória mérete, virtuális tároló eszközök listája...stb.) 2. A New gombra kattintva elindul a virtuális gépet létrehozó segéd (wizard) 3. Ezt követoen nevet kell adnunk a vendéggépnek és ki kell választanunk az operációs rendszer típusát (beszédes név használata esetén a VirtualBox képes az operációs rendszer családját kiválasztani, nekünk pusztán csak verziót kell beállítanunk): adjuk meg Solaris11-et névként és válasszuk a 64bites változatot (feltéve, hogy gazdagépünk támogatja ezt) 4. Telepítéshez és a kezdeti lépések megtételéhez 1536MB memória tökéletesen megfelel (ez késobb módosítható az elvárások függvényében) 5. Fizikai társaihoz hasonlóan, egyetlen virtuális gép sem létezhet merevlemez (jelen esetben virtuális diszk) nélkül. Használhatunk egy már létezo területet (virtuális lemezt tartalmazó állomány), de létrehozhatunk egy nekünk tetszo új példányt is. Maradjunk ez utóbbinál (Create new hard disk)! 6. A lehetséges formátumok közül - az egyszeruség okán - éljünk a felkínált alaptípussal (VDI - VirtualBox Disk Image). 7. Létrehozás során a virtuális lemez készülhet egyidejuleg (Fixed size), vagy több lépésben dinamikusan (Dynamically allocated). Az elso változat sokkal kevésbé terheli a rendszert, a második elonye pedig a helytakarékosság. Válasszuk a fix méretu változatot. 8. Most már csak egyetlen adat ismeretlen a VirtualBox számára, mégpedig a létrehozásra kerülo virtuális lemez nagysága. 8GB-os terület jelen esetben alkalmas az ismerkedés elkezdéséhez. 9. Amennyiben minden beállítást helyesen adtunk meg, a Create gomb megnyomása után elindul a virtuális lemez létrehozása. 10. Ez a muvelet a megadott adatoktól függoen néhány perc alatt befejezodik. 11. Hasonló megerosítés (Create gomb aktiválása) után elkezdodik a kért virtuális gép létrehozása is. 12. Sikeres végrehajtás után az új vitruális gép közvetlenül megjelenik a központi ablak baloldali listáján a rendelkezésre álló virtuális gépek közt. A blog bejegyzés folyamatosan frissül...a rész fennmaradó tartalma hamarosan felkerül az oldalra.

  Read the article

• Configuring Oracle HTTP Server 12c for WebLogic Server Domain

  - by Emin Askerov

  Oracle HTTP Server (OHS) 12c 12.1.2 which was released in July 2013 as a part of Oracle Web Tier 12c is the web server component of Oracle Fusion Middleware. In essence this is Apache HTTP Server 2.2.22 (with critical bug fixes from higher versions) which includes modules developed specifically by Oracle. It provides a listener functionality for Oracle WebLogic Server and the framework for hosting static pages, dynamic pages, and applications over the Web. OHS can be easily managed by Weblogic Management Framework, a set of tools which provides administrative capabilities (start, stop, lifecycle operations, etc.) for Oracle Fusion Middleware products. In other words all tools which are familiar to us (Node Manager, WLST, Administration Console, Fusion Middleware Control etc.) presented as a part of Weblogic Management Framework and using for managing Java and System Components both for Weblogic Server and Standalone Domain types. You can familiarize yourself with these terms using related documentation: 1. Introduction to Oracle HTTP Server: http://docs.oracle.com/middleware/1212/webtier/index.html 2. Weblogic Management Framework: http://docs.oracle.com/middleware/1212/core/ASCON/terminology.htm#ASCON11260 In the given post I would like to cover rather simple use case how to configure OHS as web proxy in Weblogic Cluster environment. For example, we have existing Weblogic Domain where some managed servers have been joined to cluster and host business applications. We need to configure web proxy component which will act as entry point, load balancer for our cluster for user requests. Of course, we could install old good Apache HTTP Server and configure mod_wl plugin. However this solution not optimal from manageability perspective: we need to install Apache, install additional plugin then configure it by editing configuration file which is not really convenient for FMW Administrators and often increase time of performing of simple administrative task. Alternatively, we could use OHS as System Component within Weblogic Domain and use full power of Weblogic Management Framework in order to configure, manage and monitor it! I like this idea! What about you? I hope after reading this post you will agree with me. First of all it is necessary to download OHS binaries. You can use this link for downloading: http://www.oracle.com/technetwork/java/webtier/downloads/index2-303202.html As we will use Fusion Middleware Control for managing OHS instances it is necessary to extend your domain with Enterprise Manager and Oracle ADF and JRF templates. This is not topic for focusing in this post, but you could get more information from documentation or one of my previous posts: http://docs.oracle.com/middleware/1212/wls/WLDTR/fmw_templates.htm#sthref64 https://blogs.oracle.com/imc/entry/the_specifics_of_adf_12c Note: you should have properly configured Node Manager utility for managing OHS instances Let’s consider configuration process step by step: 1. Shut down all Weblogic instances of existing domain including Admin Server; 2. Install Oracle HTTP Server. You should use your Fusion Middleware Home Path (e.g. /u01/Oracle/FMW12) for Installation Location and select Colocated HTTP Server option as Installation Type. I will not focus on this topic in this post. All information related to OHS installation you could find here: http://docs.oracle.com/middleware/1212/webtier/WTINS/install_gui.htm#i1082009 3. Next we need to extend our existing domain with OHS component. In order to do this you should do the following: a. Run Fusion Middleware Configuration Wizard (ORACLE_HOME/oracle_common/common/bin/config.sh); b. On the step 1 select Update an existing domain option and point your Fusion Middleware Home Path; c. On the step 2 check Oracle HTTP Server, Oracle Enterprise Manager Plugin for WEBTIER templates; d. Go through other steps without any changes and finish configuration process. 4. Start Admin Server and all managed servers related to your cluster 5. Log in to Enterprise Manager FMW Control using http://<hostname>:<port>/em URL 6. Now we will create OHS instance within our Weblogic Domain Infrastructure. Navigate to Weblogic Domain -> Administration -> Create/Delete OHS menu item; 7. Enter to edit mode, clicking Changes -> Lock&Edit menu item; 8. Create new OHS instance clicking Create button; 9. Define Instance Name (e.g. DevOSH) and Machine parameters; 10. Now we need to define listen port. By default OHS will use 7777 port number for income HTTP requests. We could change it to any free port number we would like to use. In order to do it, right click on our created OHS instance (left hand panel) and navigate to Administration -> Port Configuration; 11. Click on record with port number 7777 and then click Edit button; 12. Change port number value (in our case this will be 8080) and then click OK button; 13. Now we need to edit mod_wl_ohs configuration in order to enable OHS to act as proxy for WebLogic Server Instances/Cluster; 14. In order to do it right click on our created OHS instance (left panel) and navigate to Administration -> mod_wl_ohs Configuration; a. In Weblogic Cluster you should enter cluster address (define <host:port> for all managed servers which participated in cluster), e.g: 192.168.56.2:7004,192.168.56.2:7005 b. Define Weblogic Port parameter at which the Oracle WebLogic Server host is listening for connection requests from the module (or from other servers); c. Check Dynamic Server List option. This will dynamically update cluster list for every request; d. In the Location table define list of endpoint locations which you would like to process. In order to do this click Add Row button and define Location, Weblogic Cluster, Path Trim and Path Prefix parameters (if required); e. Click Apply button in order to save changes. 15. Activate changes clicking Changes ? Activate Changes menu item; 16. Finally we will start configured OHS instance. Right click on OHS instance tree item under Web Tier folder, select Control -> Start Up menu item; 17. Ensure that OHS instance up and running and then test your environment. Run deployed application to your Weblogic Cluster accessing via OHS web proxy; Normal 0 false false false RU X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• How to Tell If Your Computer is Overheating and What to Do About It

  - by Chris Hoffman

  Heat is a computer’s enemy. Computers are designed with heat dispersion and ventilation in mind so they don’t overheat. If too much heat builds up, your computer may become unstable or suddenly shut down. The CPU and graphics card produce much more heat when running demanding applications. If there’s a problem with your computer’s cooling system, an excess of heat could even physically damage its components. Is Your Computer Overheating? When using a typical computer in a typical way, you shouldn’t have to worry about overheating at all. However, if you’re encountering system instability issues like abrupt shut downs, blue screens, and freezes — especially while doing something demanding like playing PC games or encoding video — your computer may be overheating. This can happen for several reasons. Your computer’s case may be full of dust, a fan may have failed, something may be blocking your computer’s vents, or you may have a compact laptop that was never designed to run at maximum performance for hours on end. Monitoring Your Computer’s Temperature First, bear in mind that different CPUs and GPUs (graphics cards) have different optimal temperature ranges. Before getting too worried about a temperature, be sure to check your computer’s documentation — or its CPU or graphics card specifications — and ensure you know the temperature ranges your hardware can handle. You can monitor your computer’s temperatures in a variety of different ways. First, you may have a way to monitor temperature that is already built into your system. You can often view temperature values in your computer’s BIOS or UEFI settings screen. This allows you to quickly see your computer’s temperature if Windows freezes or blue screens on you — just boot the computer, enter the BIOS or UEFI screen, and check the temperatures displayed there. Note that not all BIOSes or UEFI screens will display this information, but it is very common. There are also programs that will display your computer’s temperature. Such programs just read the sensors inside your computer and show you the temperature value they report, so there are a wide variety of tools you can use for this, from the simple Speccy system information utility to an advanced tool like SpeedFan. HWMonitor also offer this feature, displaying a wide variety of sensor information. Be sure to look at your CPU and graphics card temperatures. You can also find other temperatures, such as the temperature of your hard drive, but these components will generally only overheat if it becomes extremely hot in the computer’s case. They shouldn’t generate too much heat on their own. If you think your computer may be overheating, don’t just glance as these sensors once and ignore them. Do something demanding with your computer, such as running a CPU burn-in test with Prime 95, playing a PC game, or running a graphical benchmark. Monitor the computer’s temperature while you do this, even checking a few hours later — does any component overheat after you push it hard for a while? Preventing Your Computer From Overheating If your computer is overheating, here are some things you can do about it: Dust Out Your Computer’s Case: Dust accumulates in desktop PC cases and even laptops over time, clogging fans and blocking air flow. This dust can cause ventilation problems, trapping heat and preventing your PC from cooling itself properly. Be sure to clean your computer’s case occasionally to prevent dust build-up. Unfortunately, it’s often more difficult to dust out overheating laptops. Ensure Proper Ventilation: Put the computer in a location where it can properly ventilate itself. If it’s a desktop, don’t push the case up against a wall so that the computer’s vents become blocked or leave it near a radiator or heating vent. If it’s a laptop, be careful to not block its air vents, particularly when doing something demanding. For example, putting a laptop down on a mattress, allowing it to sink in, and leaving it there can lead to overheating — especially if the laptop is doing something demanding and generating heat it can’t get rid of. Check if Fans Are Running: If you’re not sure why your computer started overheating, open its case and check that all the fans are running. It’s possible that a CPU, graphics card, or case fan failed or became unplugged, reducing air flow. Tune Up Heat Sinks: If your CPU is overheating, its heat sink may not be seated correctly or its thermal paste may be old. You may need to remove the heat sink and re-apply new thermal paste before reseating the heat sink properly. This tip applies more to tweakers, overclockers, and people who build their own PCs, especially if they may have made a mistake when originally applying the thermal paste. This is often much more difficult when it comes to laptops, which generally aren’t designed to be user-serviceable. That can lead to trouble if the laptop becomes filled with dust and needs to be cleaned out, especially if the laptop was never designed to be opened by users at all. Consult our guide to diagnosing and fixing an overheating laptop for help with cooling down a hot laptop. Overheating is a definite danger when overclocking your CPU or graphics card. Overclocking will cause your components to run hotter, and the additional heat will cause problems unless you can properly cool your components. If you’ve overclocked your hardware and it has started to overheat — well, throttle back the overclock! Image Credit: Vinni Malek on Flickr     

  Read the article

• The Faces in the Crowdsourcing

  - by Applications User Experience

  By Jeff Sauro, Principal Usability Engineer, Oracle Imagine having access to a global workforce of hundreds of thousands of people who can perform tasks or provide feedback on a design quickly and almost immediately. Distributing simple tasks not easily done by computers to the masses is called "crowdsourcing" and until recently was an interesting concept, but due to practical constraints wasn't used often. Enter Amazon.com. For five years, Amazon has hosted a service called Mechanical Turk, which provides an easy interface to the crowds. The service has almost half a million registered, global users performing a quarter of a million human intelligence tasks (HITs). HITs are submitted by individuals and companies in the U.S. and pay from $.01 for simple tasks (such as determining if a picture is offensive) to several dollars (for tasks like transcribing audio). What do we know about the people who toil away in this digital crowd? Can we rely on the work done in this anonymous marketplace? A rendering of the actual Mechanical Turk (from Wikipedia) Knowing who is behind Amazon's Mechanical Turk is fitting, considering the history of the actual Mechanical Turk. In the late 1800's, a mechanical chess-playing machine awed crowds as it beat master chess players in what was thought to be a mechanical miracle. It turned out that the creator, Wolfgang von Kempelen, had a small person (also a chess master) hiding inside the machine operating the arms to provide the illusion of automation. The field of human computer interaction (HCI) is quite familiar with gathering user input and incorporating it into all stages of the design process. It makes sense then that Mechanical Turk was a popular discussion topic at the recent Computer Human Interaction usability conference sponsored by the Association for Computing Machinery in Atlanta. It is already being used as a source for input on Web sites (for example, Feedbackarmy.com) and behavioral research studies. Two papers shed some light on the faces in this crowd. One paper tells us about the shifting demographics from mostly stay-at-home moms to young men in India. The second paper discusses the reliability and quality of work from the workers. Just who exactly would spend time doing tasks for pennies? In "Who are the crowdworkers?" University of California researchers Ross, Silberman, Zaldivar and Tomlinson conducted a survey of Mechanical Turk worker demographics and compared it to a similar survey done two years before. The initial survey reported workers consisting largely of young, well-educated women living in the U.S. with annual household incomes above $40,000. The more recent survey reveals a shift in demographics largely driven by an influx of workers from India. Indian workers went from 5% to over 30% of the crowd, and this block is largely male (two-thirds) with a higher average education than U.S. workers, and 64% report an annual income of less than $10,000 (keeping in mind $1 has a lot more purchasing power in India). This shifting demographic certainly has implications as language and culture can play critical roles in the outcome of HITs. Of course, the demographic data came from paying Turkers $.10 to fill out a survey, so there is some question about both a self-selection bias (characteristics which cause Turks to take this survey may be unrepresentative of the larger population), not to mention whether we can really trust the data we get from the crowd. Crowds can perform tasks or provide feedback on a design quickly and almost immediately for usability testing. (Photo attributed to victoriapeckham Flikr While having immediate access to a global workforce is nice, one major problem with Mechanical Turk is the incentive structure. Individuals and companies that deploy HITs want quality responses for a low price. Workers, on the other hand, want to complete the task and get paid as quickly as possible, so that they can get on to the next task. Since many HITs on Mechanical Turk are surveys, how valid and reliable are these results? How do we know whether workers are just rushing through the multiple-choice responses haphazardly answering? In "Are your participants gaming the system?" researchers at Carnegie Mellon (Downs, Holbrook, Sheng and Cranor) set up an experiment to find out what percentage of their workers were just in it for the money. The authors set up a 30-minute HIT (one of the more lengthy ones for Mechanical Turk) and offered a very high $4 to those who qualified and $.20 to those who did not. As part of the HIT, workers were asked to read an email and respond to two questions that determined whether workers were likely rushing through the HIT and not answering conscientiously. One question was simple and took little effort, while the second question required a bit more work to find the answer. Workers were led to believe other factors than these two questions were the qualifying aspect of the HIT. Of the 2000 participants, roughly 1200 (or 61%) answered both questions correctly. Eighty-eight percent answered the easy question correctly, and 64% answered the difficult question correctly. In other words, about 12% of the crowd were gaming the system, not paying enough attention to the question or making careless errors. Up to about 40% won't put in more than a modest effort to get paid for a HIT. Young men and those that considered themselves in the financial industry tended to be the most likely to try to game the system. There wasn't a breakdown by country, but given the demographic information from the first article, we could infer that many of these young men come from India, which makes language and other cultural differences a factor. These articles raise questions about the role of crowdsourcing as a means for getting quick user input at low cost. While compensating users for their time is nothing new, the incentive structure and anonymity of Mechanical Turk raises some interesting questions. How complex of a task can we ask of the crowd, and how much should these workers be paid? Can we rely on the information we get from these professional users, and if so, how can we best incorporate it into designing more usable products? Traditional usability testing will still play a central role in enterprise software. Crowdsourcing doesn't replace testing; instead, it makes certain parts of gathering user feedback easier. One can turn to the crowd for simple tasks that don't require specialized skills and get a lot of data fast. As more studies are conducted on Mechanical Turk, I suspect we will see crowdsourcing playing an increasing role in human computer interaction and enterprise computing. References: Downs, J. S., Holbrook, M. B., Sheng, S., and Cranor, L. F. 2010. Are your participants gaming the system?: screening mechanical turk workers. In Proceedings of the 28th international Conference on Human Factors in Computing Systems (Atlanta, Georgia, USA, April 10 - 15, 2010). CHI '10. ACM, New York, NY, 2399-2402. Link: http://doi.acm.org/10.1145/1753326.1753688 Ross, J., Irani, L., Silberman, M. S., Zaldivar, A., and Tomlinson, B. 2010. Who are the crowdworkers?: shifting demographics in mechanical turk. In Proceedings of the 28th of the international Conference Extended Abstracts on Human Factors in Computing Systems (Atlanta, Georgia, USA, April 10 - 15, 2010). CHI EA '10. ACM, New York, NY, 2863-2872. Link: http://doi.acm.org/10.1145/1753846.1753873

  Read the article

• SQL Sentry First Impressions

  - by AjarnMark

  After struggling to defend my SQL Servers from a political attack recently, I realized that I needed better tools to back me up, and SQL Sentry is the leading candidate. A couple of weeks ago, seemingly from out of nowhere, complaints from the business users started coming in that one of the core internal applications was running dramatically slower than normal, and fingers were being pointed at the SQL Server.  Unfortunately, we don’t have a production DBA whose entire job is to monitor and maintain our SQL Servers.  The responsibility falls to me to do the best I can, investing only a small portion of my time, because there are so many other responsibilities to take care of, and our industry is still deep in recession.  I inherited these SQL Servers and have made significant improvements in process and procedure, but I had not yet made the time to take real baseline measurements or keep a really close eye on the performance.  Like many DBAs, I wrote several of my own tools and used the “built-in tools” like Profiler, PerfMon, and sp_who2 (did I mention most of our instances are SQL Server 2000?).  These have all served me well for in-the-moment troubleshooting and maintenance, but they really fell down on the job when I was called upon to “prove” that SQL Server performance was acceptable and more importantly had not degraded recently (i.e. historical comparisons).  I really didn’t have anything from a historical comparison perspective, but I was able to show that current performance was acceptable, and deflect attention back onto other components (which in fact turned out to be the real culprit). That experience dramatically illustrated the need for better monitoring tools.  Coincidentally, I had been talking recently to my boss about the mini nightmare of monitoring several critical and interdependent overnight jobs that operate on separate instances of SQL Server.  Among other tools, I had been using Idera’s SQL Job Manager which is a free tool and did a nice job of showing me job schedules and histories in a nice calendar view.  This worked fairly well, and for the money (did I mention it was free?) it couldn’t be beat.  But it is based on the stored job history in MSDB, and there were other performance problems that we ran into when we started changing the settings for how much job history to retain, in order to be able to look back a month or more in the calendar view.  Another coincidence (if you believe in such things) was that when we had some of those performance challenges, I posted a couple of questions to the #sqlhelp hashtag on Twitter and Greg Gonzalez (@SQLSensei) suggested I check out SQL Sentry’s Event Manager.  At the time, I just thought he worked there, but later found out that he founded the company.  When I took a quick look at the features & benefits, the one that really jumped out at me is Chaining and Queueing which sounded like it would really help with our “interdependent jobs on different servers” issue. I know that is a lot of background story and coincidences, but hopefully you have stuck with me so far, and now we have arrived at the point where last week I downloaded and installed the 30-day trial of the SQL Sentry Power Suite, which is Event Manager plus Performance Advisor.  And I must say that I really like what I see so far.  Here are a few highlights: Great Support.  I had two issues getting the trial setup and monitoring a handful of our servers.  One of which was entirely my fault (missed a security setting in SQL 2008) and the other was mostly my fault (late change to some config settings that were apparently cached and did not get refreshed properly).  In both cases, the support staff at SQL Sentry were very responsive and rather quickly figured out what the cause and fix was for each of them.  This left me with a great impression of the company.  Kudos to them! Chaining and Queueing.  While I have not yet activated this feature, I am very excited about the possibilities.  We have jobs on three different instances of SQL Server that have to be run in a certain order, and each has to finish before the next can successfully begin, and I believe this feature will ensure just that.  It has been a real pain in the backside when one of those jobs runs just a little too long and does not finish before the job on another instance starts, thus triggering a chain reaction of either outright job failures, or worse, successful completion of completely invalid processing. Calendar View.  I really, really like the Event Manager calendar view where I can see all jobs and events across all instances and identify potential resource contention as well as windows of opportunity for maintenance activity.  Very well done, and based on Event Manager’s own database of accumulated historical information rather than querying the source instances every time. Performance Advisor Dashboard History View.  This view let’s me quickly select a date and time range and it displays graphs of key SQL Server and Windows metrics.  This is exactly the thing I needed to answer the “has performance changed recently” question at the beginning of this post. Reporting Services Subscription Jobs with Report Name.  This was a big and VERY pleasant surprise.  If you have ever looked at the list of SQL Server jobs that SQL Server Reporting Services creates when you make a Subscription, you will notice that they all have some sort of GUID as the name of the job.  This is really ugly, and really annoying because when you are just looking at the SQL Agent and Job Activity Monitor, if you see that Job X failed, you really do not have any indication in the name or the properties of the Job itself, as to what Report that was for.  But with SQL Sentry Event Manager you do.  The Jobs list in the Navigator pane in SQL Sentry, amazingly, displays the name of the Report that the Subscription Job is for.  And when you open it to see more details, it shows you the full Reporting Services path to that Report, so you can immediately track it down in the Report Manager in case you want to identify/notify the owner or edit the Subscription information.  I did not expect this at all, but I sure do like it.  HOORAY! That is just my first impressions from using the tools for a few days.  And I haven’t even gotten into how it showed me where I was completely mistaken about one aspect of my SQL Server disk configurations.  I’ll share that lesson in another blog entry.  But I have to say it again, the combination of Event Manager and Performance Advisor working together have really made me a fan.

  Read the article

• Christmas in the Clouds

  - by andrewbrust

  I have been spending the last 2 weeks immersing myself in a number of Windows Azure and SQL Azure technologies.  And in setting up a new business (I’ll speak more about that in the future), I have also become a customer of Microsoft’s BPOS (Business Productivity Online Services).  In short, it has been a fortnight of Microsoft cloud computing. On the Azure side, I’ve looked, of course, at Web Roles and Worker Roles.  But I’ve also looked at Azure Storage’s REST API (including coding to it directly), I’ve looked at Azure Drive and the new VM Role; I’ve looked quite a bit at SQL Azure (including the project “Houston” Silverlight UI) and I’ve looked at SQL Azure labs’ OData service too. I’ve also looked at DataMarket and its integration with both PowerPivot and native Excel.  Then there’s AppFabric Caching, SQL Azure Reporting (what I could learn of it) and the Visual Studio tooling for Azure, including the storage of certificate-based credentials.  And to round it out with some user stuff, on the BPOS side, I’ve been working with Exchange Online, SharePoint Online and LiveMeeting. I have to say I like a lot of what I’ve been seeing.  Azure’s not perfect, and BPOS certainly isn’t either.  But there’s good stuff in all these products, and there’s a lot of value. Azure Goes Deep Most people know that Web and Worker roles put the platform in charge of spinning virtual machines up and down, and keeping them up to date. But you can go way beyond that now.  The still-in-beta VM Role gives you the power to craft the machine (much as does Amazon’s EC2), though it takes away the platform’s self-managing attributes.  It still spins instances up and down, making drive storage non-durable, but Azure Drive gives you the ability to store VHD files as blobs and mount them as virtual hard drives that are readable and writeable.  Whether with Azure Storage or SQL Azure, Azure does data.  And OData is everywhere.  Azure Table Storage supports an OData Interface.  So does SQL Azure and so does DataMarket (the former project “Dallas”).  That means that Azure data repositories aren’t just straightforward to provision and configure…they’re also easy to program against, from just about any programming environment, in a RESTful manner.  And for more .NET-centric implementations, Azure AppFabric caching takes the technology formerly known as “Velocity” and throws it up into the cloud, speeding data access even more. Snapping in Place Once you get the hang of it, this stuff just starts to work in a way that becomes natural to understand.  I wasn’t expecting that, and I was really happy to discover it. In retrospect, I am not surprised, because I think the various Azure teams are the center of gravity for Redmond’s innovation right now.  The products belie this and so do my observations of the product teams’ motivation and high morale.  It is really good to see this; Microsoft needs to lead somewhere, and they need to be seen as the underdog while doing so.  With Azure, both requirements are in place.   BPOS: Bad Acronym, Easy Setup BPOS is about products you already know; Exchange, SharePoint, Live Meeting and Office Communications Server.  As such, it’s hard not to be underwhelmed by BPOS.  Until you realize how easy it makes it to get all that stuff set up.  I would say that from sign-up to productive use took me about 45 minutes…and that included the time necessary to wrestle with my DNS provider, set up Outlook and my SmartPhone up to talk to the Exchange account, create my SharePoint site collection, and configure the Outlook Conferencing add-in to talk to the provisioned Live Meeting account. Never before did I think setting up my own Exchange mail could come anywhere close to the simplicity of setting up an SMTP/POP account, and yet BPOS actually made it faster.   What I want from my Azure Christmas Next Year Not everything about Microsoft’s cloud is good.  I close this post with a list of things I’d like to see addressed: BPOS offerings are still based on the 2007 Wave of Microsoft server technologies.  We need to get to 2010, and fast.  Arguably, the 2010 products should have been released to the off-premises channel before the on-premise sone.  Office 365 can’t come fast enough. Azure’s Internet tooling and domain naming, is scattered and confusing.  Deployed ASP.NET applications go to cloudapp.net; SQL Azure and Azure storage work off windows.net.  The Azure portal and Project Houston are at azure.com.  Then there’s appfabriclabs.com and sqlazurelabs.com.  There is a new Silverlight portal that replaces most, but not all of the HTML ones.  And Project Houston is Silvelright-based too, though separate from the Silverlight portal tooling. Microsoft is the king off tooling.  They should not make me keep an entire OneNote notebook full of portal links, account names, access keys, assemblies and namespaces and do so much CTRL-C/CTRL-V work.  I’d like to see more project templates, have them automatically reference the appropriate assemblies, generate the right using/Imports statements and prime my config files with the right markup.  Then I want a UI that lets me log in with my Live ID and pick the appropriate project, database, namespace and key string to get set up fast. Beta programs, if they’re open, should onboard me quickly.  I know the process is difficult and everyone’s going as fast as they can.  But I don’t know why it’s so difficult or why it takes so long.  Getting developers up to speed on new features quickly helps popularize the platform.  Make this a priority. Make Azure accessible from the simplicity platforms, i.e. ASP.NET Web Pages (Razor) and LightSwitch.  Support .NET 4 now.  Make WebMatrix, IIS Express and SQL Compact work with the Azure development fabric. Have HTML helpers make Azure programming easier.  Have LightSwitch work with SQL Azure and not require SQL Express.  LightSwitch has some promising Azure integration now.  But we need more.  WebMatrix has none and that’s just silly, now that the Extra Small Instance is being introduced. The Windows Azure Platform Training Kit is great.  But I want Microsoft to make it even better and I want them to evangelize it much more aggressively.  There’s a lot of good material on Azure development out there, but it’s scattered in the same way that the platform is.   The Training Kit ties a lot of disparate stuff together nicely.  Make it known. Should Old Acquaintance Be Forgot All in all, diving deep into Azure was a good way to end the year.  Diving deeper into Azure should a great way to spend next year, not just for me, but for Microsoft too.

  Read the article

• How to Identify Which Hardware Component is Failing in Your Computer

  - by Chris Hoffman

  Concluding that your computer has a hardware problem is just the first step. If you’re dealing with a hardware issue and not a software issue, the next step is determining what hardware problem you’re actually dealing with. If you purchased a laptop or pre-built desktop PC and it’s still under warranty, you don’t need to care about this. Have the manufacturer fix the PC for you — figuring it out is their problem. If you’ve built your own PC or you want to fix a computer that’s out of warranty, this is something you’ll need to do on your own. Blue Screen 101: Search for the Error Message This may seem like obvious advice, but searching for information about a blue screen’s error message can help immensely. Most blue screens of death you’ll encounter on modern versions of Windows will likely be caused by hardware failures. The blue screen of death often displays information about the driver that crashed or the type of error it encountered. For example, let’s say you encounter a blue screen that identified “NV4_disp.dll” as the driver that caused the blue screen. A quick Google search will reveal that this is the driver for NVIDIA graphics cards, so you now have somewhere to start. It’s possible that your graphics card is failing if you encounter such an error message. Check Hard Drive SMART Status Hard drives have a built in S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) feature. The idea is that the hard drive monitors itself and will notice if it starts to fail, providing you with some advance notice before the drive fails completely. This isn’t perfect, so your hard drive may fail even if SMART says everything is okay. If you see any sort of “SMART error” message, your hard drive is failing. You can use SMART analysis tools to view the SMART health status information your hard drives are reporting. Test Your RAM RAM failure can result in a variety of problems. If the computer writes data to RAM and the RAM returns different data because it’s malfunctioning, you may see application crashes, blue screens, and file system corruption. To test your memory and see if it’s working properly, use Windows’ built-in Memory Diagnostic tool. The Memory Diagnostic tool will write data to every sector of your RAM and read it back afterwards, ensuring that all your RAM is working properly. Check Heat Levels How hot is is inside your computer? Overheating can rsult in blue screens, crashes, and abrupt shut downs. Your computer may be overheating because you’re in a very hot location, it’s ventilated poorly, a fan has stopped inside your computer, or it’s full of dust. Your computer monitors its own internal temperatures and you can access this information. It’s generally available in your computer’s BIOS, but you can also view it with system information utilities such as SpeedFan or Speccy. Check your computer’s recommended temperature level and ensure it’s within the appropriate range. If your computer is overheating, you may see problems only when you’re doing something demanding, such as playing a game that stresses your CPU and graphics card. Be sure to keep an eye on how hot your computer gets when it performs these demanding tasks, not only when it’s idle. Stress Test Your CPU You can use a utility like Prime95 to stress test your CPU. Such a utility will fore your computer’s CPU to perform calculations without allowing it to rest, working it hard and generating heat. If your CPU is becoming too hot, you’ll start to see errors or system crashes. Overclockers use Prime95 to stress test their overclock settings — if Prime95 experiences errors, they throttle back on their overclocks to ensure the CPU runs cooler and more stable. It’s a good way to check if your CPU is stable under load. Stress Test Your Graphics Card Your graphics card can also be stress tested. For example, if your graphics driver crashes while playing games, the games themselves crash, or you see odd graphical corruption, you can run a graphics benchmark utility like 3DMark. The benchmark will stress your graphics card and, if it’s overheating or failing under load, you’ll see graphical problems, crashes, or blue screens while running the benchmark. If the benchmark seems to work fine but you have issues playing a certain game, it may just be a problem with that game. Swap it Out Not every hardware problem is easy to diagnose. If you have a bad motherboard or power supply, their problems may only manifest through occasional odd issues with other components. It’s hard to tell if these components are causing problems unless you replace them completely. Ultimately, the best way to determine whether a component is faulty is to swap it out. For example, if you think your graphics card may be causing your computer to blue screen, pull the graphics card out of your computer and swap in a new graphics card. If everything is working well, it’s likely that your previous graphics card was bad. This isn’t easy for people who don’t have boxes of components sitting around, but it’s the ideal way to troubleshoot. Troubleshooting is all about trial and error, and swapping components out allows you to pin down which component is actually causing the problem through a process of elimination. This isn’t a complete guide to everything that could likely go wrong and how to identify it — someone could write a full textbook on identifying failing components and still not cover everything. But the tips above should give you some places to start dealing with the more common problems. Image Credit: Justin Marty on Flickr     

  Read the article

• CodePlex Daily Summary for Monday, July 15, 2013

  CodePlex Daily Summary for Monday, July 15, 2013Popular ReleasesMVC Forum: MVC Forum v1.0: Finally version 1.0 is here! We have been fixing a few bugs, and making sure the release is as stable as possible. We have also changed the way configuration of the application works, mostly how to add your own code or replace some of the standard code with your own. If you download and use our software, please give us some sort of feedback, good or bad!SharePoint 2013 TypeScript Definitions: Release 1.1: TypeScript 0.9 support SharePoint TypeScript Definitions are now compliant with the new version of TypeScript TypeScript generics are now used for defining collection classes (derivatives of SP.ClientCollection object) Improved coverage Added mQuery definitions (m$) Added SPClientAutoFill definitions SP.Utilities namespace is now fully covered SP.UI modal dialog definitions improved CSR definitions improved, added some missing methods and context properties, mostly related to list ...GoAgent GUI: GoAgent GUI ??? 1.0.0: ????GoAgent GUI????，???????????.Net Framework 4.0 ???????: Windows 8 x64 Windows 8 x86 Windows 7 x64 Windows 7 x86 ???????： Windows 8.1 Preview (x86/x64) ???????： Windows XP ????： ????????GoAgent????，????????，?????????????，???????????????????，??????????，????。PiGraph: PiGraph 2.0.8.13: C?p nh?t:Các l?i dã s?a: S?a l?i không nh?p du?c s? âm. L?i tabindex trong giao di?n Thêm hàm Các l?i chua kh?c ph?c: L?i ghi chú nh?p nháy màu. L?i khung ghi chú vu?t ra kh?i biên khi luu file. Luu ý:N?u không kh?i d?ng duoc chuong trình, b?n nên c?p nh?t driver card d? h?a phiên b?n m?i nh?t: AMD Graphics Drivers NVIDIA Driver Xem yêu c?u h? th?ngD3D9Client: D3D9Client R12 for Orbiter Beta: D3D9Client release for orbiter BetaVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...Project Server 2013 Event Handler Admin Tool: PSI Event Admin Tool: Download & exract the File. Use LoggerAdmin to upload the event handlers in project server 2013. PSIEventLogger\LoggerAdmin\bin\DebugGherkin editor: Gherkin Editor Beta 2: Fix issue #7 and add some refactoring and code cleanupNew-NuGetPackage PowerShell Script: New-NuGetPackage.ps1 PowerShell Script v1.2: Show nuget gallery to push to when prompting user if they want to push their package.Site Templates By Steve: SharePoint 2010 CORE Site Theme By Steve WSP: Great Site Theme to start with from Steve. See project home page for install instructions. This is a nice centered, mega-menu, fixed width masterpage with styles. Remember to update the mega menu lists.SharePoint Solution Installer: SharePoint Solution Installer V1.2.8: setup2013.exe now supports CompatibilityLevel to target specific hive Use setup.exe for SP2007 & SP2010. Use setup2013.exe for SP2013.TBox - tool to make developer's life easier.: TBox 1.021: 1)Add console unit tests runner, to run unit tests in parallel from console. Also this new sub tool can save valid xml nunit report. It can help you in continuous integration. 2)Fix build scripts.LifeInSharepoint Modern UI Update: Version 2: Some minor improvements, including Audience Targeting support for quick launch links. Also removing all NextDocs references.Virtual Photonics: VTS MATLAB Package 1.0.13 Beta: This is the beta release of the MATLAB package with examples of using the VTS libraries within MATLAB. Changes for this release: Added two new examples to vts_solver_demo.m that: 1) generates and plots R(lambda) at a given rho, and chromophore concentrations assuming a power law for scattering, and 2) solves inverse problem for R(lambda) at given rho. This example solves for concentrations of HbO2, Hb and H20 given simulated measurements created using Nurbs scaled Monte Carlo and inverted u...Advanced Resource Tab for Blend: Advanced Resource Tab: This is the first alpha release of the advanced resource tab for Blend for Visual Studio 2012.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.96: Fix for issue #19957: EXE should output the name of the file(s) being minified. Discussion #449181: throw a Sev-2 warning when trailing commas are detected on an Array literal. Perfectly legal to do so, but the behavior ends up working differently on different browsers, so throw a cross-browser warning. Add a few more known global names for improved ES6 compatibility update Nuget package to version 2.5 and automatically add the AjaxMin.targets to your project when you update the package...Outlook 2013 Add-In: Categories and Colors: This new version has a major change in the drawing of the list items: - Using owner drawn code to format the appointments using GDI (some flickering may occur, but it looks a little bit better IMHO, with separate sections). - Added category color support (if more than one category, only one color will be shown). Here, the colors Outlook uses are slightly different than the ones available in System.Drawing, so I did a first approach matching. ;-) - Added appointment status support (to show fr...Columbus Remote Desktop: 2.0 Sapphire: Added configuration settings Added update notifications Added ability to disable GPU acceleration Fixed connection bugsLINQ to Twitter: LINQ to Twitter v2.1.07: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.DotNetNuke® Community Edition CMS: 06.02.08: Major Highlights Fixed issue where the application throws an Unhandled Error and an HTTP Response Code of 200 when the connection to the database is lost. Security FixesNone Updated Modules/Providers ModulesNone ProvidersNoneNew Projects[.Net Intl] harroc_c;mallar_a;olouso_f: The goal of this project is to create a web crawler and a web front who allows you to search in your index. You will create a mini (or large!) search engine basButterfly Storage: Butterfly Storage is a data access technology based on object-oriented database model for Windows Store applications.KaveCompany: KaveCompleave that girl alone: a team project!MyClrProfiler: This project helps you learn about and develop your own CLR profiler.NETDeob: Deobfuscate obfuscated .NET files easilyProgram stomatologie: SummarySimple Graph Library: Simple portable class library for graphs data structures. .NET, Silverlight 4/5, Windows Phone, Windows RT, Xbox 360T6502 Emulator: T6502 is a 6502 emulator written in TypeScript using AngularJS. The goal is well-organized, readable code over performance.WP8 File Access Webserver: C# HTTP server and web application on Windows Phone 8. Implements file access, browsing and downloading.wpadk: wpadk????wp7?????? ?????????，?????、SDK、wpadk?????????????。??????????????????。??????????????????，????wpadk?????????????????????????????????????。xlmUnit: xlmUnit, Unit Testing

  Read the article

• My vertex shader doesn't affect texture coords or diffuse info but works for position

  - by tina nyaa

  I am new to 3D and DirectX - in the past I have only used abstractions for 2D drawing. Over the past month I've been studying really hard and I'm trying to modify and adapt some of the shaders as part of my personal 'study project'. Below I have a shader, modified from one of the Microsoft samples. I set diffuse and tex0 vertex shader outputs to zero, but my model still shows the full texture and lighting as if I hadn't changed the values from the vertex buffer. Changing the position of the model works, but nothing else. Why is this? // // Skinned Mesh Effect file // Copyright (c) 2000-2002 Microsoft Corporation. All rights reserved. // float4 lhtDir = {0.0f, 0.0f, -1.0f, 1.0f}; //light Direction float4 lightDiffuse = {0.6f, 0.6f, 0.6f, 1.0f}; // Light Diffuse float4 MaterialAmbient : MATERIALAMBIENT = {0.1f, 0.1f, 0.1f, 1.0f}; float4 MaterialDiffuse : MATERIALDIFFUSE = {0.8f, 0.8f, 0.8f, 1.0f}; // Matrix Pallette static const int MAX_MATRICES = 100; float4x3 mWorldMatrixArray[MAX_MATRICES] : WORLDMATRIXARRAY; float4x4 mViewProj : VIEWPROJECTION; /////////////////////////////////////////////////////// struct VS_INPUT { float4 Pos : POSITION; float4 BlendWeights : BLENDWEIGHT; float4 BlendIndices : BLENDINDICES; float3 Normal : NORMAL; float3 Tex0 : TEXCOORD0; }; struct VS_OUTPUT { float4 Pos : POSITION; float4 Diffuse : COLOR; float2 Tex0 : TEXCOORD0; }; float3 Diffuse(float3 Normal) { float CosTheta; // N.L Clamped CosTheta = max(0.0f, dot(Normal, lhtDir.xyz)); // propogate scalar result to vector return (CosTheta); } VS_OUTPUT VShade(VS_INPUT i, uniform int NumBones) { VS_OUTPUT o; float3 Pos = 0.0f; float3 Normal = 0.0f; float LastWeight = 0.0f; // Compensate for lack of UBYTE4 on Geforce3 int4 IndexVector = D3DCOLORtoUBYTE4(i.BlendIndices); // cast the vectors to arrays for use in the for loop below float BlendWeightsArray[4] = (float[4])i.BlendWeights; int IndexArray[4] = (int[4])IndexVector; // calculate the pos/normal using the "normal" weights // and accumulate the weights to calculate the last weight for (int iBone = 0; iBone < NumBones-1; iBone++) { LastWeight = LastWeight + BlendWeightsArray[iBone]; Pos += mul(i.Pos, mWorldMatrixArray[IndexArray[iBone]]) * BlendWeightsArray[iBone]; Normal += mul(i.Normal, mWorldMatrixArray[IndexArray[iBone]]) * BlendWeightsArray[iBone]; } LastWeight = 1.0f - LastWeight; // Now that we have the calculated weight, add in the final influence Pos += (mul(i.Pos, mWorldMatrixArray[IndexArray[NumBones-1]]) * LastWeight); Normal += (mul(i.Normal, mWorldMatrixArray[IndexArray[NumBones-1]]) * LastWeight); // transform position from world space into view and then projection space //o.Pos = mul(float4(Pos.xyz, 1.0f), mViewProj); o.Pos = mul(float4(Pos.xyz, 1.0f), mViewProj); o.Diffuse.x = 0.0f; o.Diffuse.y = 0.0f; o.Diffuse.z = 0.0f; o.Diffuse.w = 0.0f; o.Tex0 = float2(0,0); return o; } technique t0 { pass p0 { VertexShader = compile vs_3_0 VShade(4); } } I am currently using the SlimDX .NET wrapper around DirectX, but the API is extremely similar: public void Draw() { var device = vertexBuffer.Device; device.Clear(ClearFlags.Target | ClearFlags.ZBuffer, Color.White, 1.0f, 0); device.SetRenderState(RenderState.Lighting, true); device.SetRenderState(RenderState.DitherEnable, true); device.SetRenderState(RenderState.ZEnable, true); device.SetRenderState(RenderState.CullMode, Cull.Counterclockwise); device.SetRenderState(RenderState.NormalizeNormals, true); device.SetSamplerState(0, SamplerState.MagFilter, TextureFilter.Anisotropic); device.SetSamplerState(0, SamplerState.MinFilter, TextureFilter.Anisotropic); device.SetTransform(TransformState.World, Matrix.Identity * Matrix.Translation(0, -50, 0)); device.SetTransform(TransformState.View, Matrix.LookAtLH(new Vector3(-200, 0, 0), Vector3.Zero, Vector3.UnitY)); device.SetTransform(TransformState.Projection, Matrix.PerspectiveFovLH((float)Math.PI / 4, (float)device.Viewport.Width / device.Viewport.Height, 10, 10000000)); var material = new Material(); material.Ambient = material.Diffuse = material.Emissive = material.Specular = new Color4(Color.White); material.Power = 1f; device.SetStreamSource(0, vertexBuffer, 0, vertexSize); device.VertexDeclaration = vertexDeclaration; device.Indices = indexBuffer; device.Material = material; device.SetTexture(0, texture); var param = effect.GetParameter(null, "mWorldMatrixArray"); var boneWorldTransforms = bones.OrderedBones.OrderBy(x => x.Id).Select(x => x.CombinedTransformation).ToArray(); effect.SetValue(param, boneWorldTransforms); effect.SetValue(effect.GetParameter(null, "mViewProj"), Matrix.Identity);// Matrix.PerspectiveFovLH((float)Math.PI / 4, (float)device.Viewport.Width / device.Viewport.Height, 10, 10000000)); effect.SetValue(effect.GetParameter(null, "MaterialDiffuse"), material.Diffuse); effect.SetValue(effect.GetParameter(null, "MaterialAmbient"), material.Ambient); effect.Technique = effect.GetTechnique(0); var passes = effect.Begin(FX.DoNotSaveState); for (var i = 0; i < passes; i++) { effect.BeginPass(i); device.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, skin.Vertices.Length, 0, skin.Indicies.Length / 3); effect.EndPass(); } effect.End(); } Again, I set diffuse and tex0 vertex shader outputs to zero, but my model still shows the full texture and lighting as if I hadn't changed the values from the vertex buffer. Changing the position of the model works, but nothing else. Why is this? Also, whatever I set in the bone transformation matrices doesn't seem to have an effect on my model. If I set every bone transformation to a zero matrix, the model still shows up as if nothing had happened, but changing the Pos field in shader output makes the model disappear. I don't understand why I'm getting this kind of behaviour. Thank you!

  Read the article

• Behavior Driven Development (BDD) and DevExpress XAF

  - by Patrick Liekhus

  So in my previous posts I showed you how I used EDMX to quickly build my business objects within XPO and XAF.  But how do you test whether your business objects are actually doing what you want and verify that your business logic is correct?  Well I was reading my monthly MSDN magazine last last year and came across an article about using SpecFlow and WatiN to build BDD tests.  So why not use these same techniques to write SpecFlow style scripts and have them generate EasyTest scripts for use with XAF.  Let me outline and show a few things below.  I plan on releasing this code in a short while, I just wanted to preview what I was thinking. Before we begin… First, if you have not read the article in MSDN, here is the link to the article that I found my inspiration.  It covers the overview of BDD vs. TDD, how to write some of the SpecFlow syntax and how use the “Steps” logic to create your own tests. Second, if you have not heard of EasyTest from DevExpress I strongly recommend you review it here.  It basically takes the power of XAF and the beauty of your application and allows you to create text based files to execute automated commands within your application. Why would we do this?  Because as you will see below, the cucumber syntax is easier for business analysts to interpret and digest the business rules from.  You can find most of the information you will need on Cucumber syntax within The Secret Ninja Cucumber Scrolls located here.  The basics of the syntax are that Given X When Y Then Z.  For example, Given I am at the login screen When I enter my login credentials Then I expect to see the home screen.  Pretty easy syntax to follow. Finally, we will need to download and install SpecFlow.  You can find it on their website here.  Once you have this installed then let’s write our first test. Let’s get started… So where to start.  Create a new testing project within your solution.  I typically call this with a similar naming convention as used by XAF, my project name .FunctionalTests (i.e.  AlbumManager.FunctionalTests).  Remove the basic test that is created for you.  We will not use the default test but rather create our own SpecFlow “Feature” files.  Add a new item to your project and select the SpecFlow Feature file under C#.  Name your feature file as you do your class files after the test they are performing. Now you can crack open your new feature file and write the actual test.  Make sure to have your Ninja Scrolls from above as it provides valuable resources on how to write your test syntax.  In this test below you can see how I defined the documentation in the Feature section.  This is strictly for our purposes of readability and do not effect the test.  The next section is the Scenario Outline which is considered a test template.  You can see the brackets <> around the fields that will be filled in for each test.  So in the example below you can see that Given I am starting a new test and the application is open.  This means I want a new EasyTest file and the windows application generated by XAF is open.  Next When I am at the Albums screen tells XAF to navigate to the Albums list view.  And I click the New:Album button, tells XAF to click the new button on the list grid.  And I enter the following information tells XAF which fields to complete with the mapped values.  And I click the Save and Close button causes the record to be saved and the detail form to be closed.  Then I verify results tests the input data against what is visible in the grid to ensure that your record was created. The Scenarios section gives each test a unique name and then fills in the values for each test.  This way you can use the same test to make multiple passes with different data. Almost there.  Now we must save the feature file and the BDD tests will be written using standard unit test syntax.  This is all handled for you by SpecFlow so just save the file.  What you will see in your Test List Editor is a unit test for each of the above scenarios you just built. You can now use standard unit testing frameworks to execute the test as you desire.  As you would expect then, these BDD SpecFlow tests can be automated into your build process to ensure that your business requirements are satisfied each and every time. How does it work? What we have done is to intercept the testing logic at runtime to interpret the SpecFlow syntax into EasyTest syntax.  This is the basic StepDefinitions that we are working on now.  We expect to put these on CodePlex within the next few days.  You can always override and make your own rules as you see fit for your project.  Follow the MSDN magazine above to start your own.  You can see part of our implementation below. As you can gather from the MSDN article and the code sample below, we have created our own common rules to build the above syntax. The code implementation for these rules basically saves your information from the feature file into an EasyTest file format.  It then executes the EasyTest file and parses the XML results of the test.  If the test succeeds the test is passed.  If the test fails, the EasyTest failure message is logged and the screen shot (as captured by EasyTest) is saved for your review. Again we are working on getting this code ready for mass consumption, but at this time it is not ready.  We will post another message when it is ready with all details about usage and setup. Thanks

  Read the article

• Combining Shared Secret and Username Token – Azure Service Bus

  - by Michael Stephenson

  As discussed in the introduction article this walkthrough will explain how you can implement WCF security with the Windows Azure Service Bus to ensure that you can protect your endpoint in the cloud with a shared secret but also flow through a username token so that in your listening WCF service you will be able to identify who sent the message. This could either be in the form of an application or a user depending on how you want to use your token. Prerequisites Before going into the walk through I want to explain a few assumptions about the scenario we are implementing but to keep the article shorter I am not going to walk through all of the steps in how to setup some of this. In the solution we have a simple console application which will represent the client application. There is also the services WCF application which contains the WCF service we will expose via the Windows Azure Service Bus. The WCF Service application in this example was hosted in IIS 7 on Windows 2008 R2 with AppFabric Server installed and configured to auto-start the WCF listening services. I am not going to go through significant detail around the IIS setup because it should not matter in relation to this article however if you want to understand more about how to configure WCF and IIS for such a scenario please refer to the following paper which goes into a lot of detail about how to configure this. The link is: http://tinyurl.com/8s5nwrz   The Service Component To begin with let's look at the service component and how it can be configured to listen to the service bus using a shared secret but to also accept a username token from the client. In the sample the service component is called Acme.Azure.ServiceBus.Poc.UN.Services. It has a single service which is the Visual Studio template for a WCF service when you add a new WCF Service Application so we have a service called Service1 with its Echo method. Nothing special so far!.... The next step is to look at the web.config file to see how we have configured the WCF service. In the services section of the WCF configuration you can see I have created my service and I have created a local endpoint which I simply used to do a little bit of diagnostics and to check it was working, but more importantly there is the Windows Azure endpoint which is using the ws2007HttpRelayBinding (note that this should also work just the same if your using netTcpRelayBinding). The key points to note on the above picture are the service behavior called MyServiceBehaviour and the service bus endpoints behavior called MyEndpointBehaviour. We will go into these in more detail later.   The Relay Binding The relay binding for the service has been configured to use the TransportWithMessageCredential security mode. This is the important bit where the transport security really relates to the interaction between the service and listening to the Azure Service Bus and the message credential is where we will use our username token like we have specified in the message/clientCrentialType attribute. Note also that we have left the relayClientAuthenticationType set to RelayAccessToken. This means that authentication will be made against ACS for accessing the service bus and messages will not be accepted from any sender who has not been authenticated by ACS.   The Endpoint Behaviour In the below picture you can see the endpoint behavior which is configured to use the shared secret client credential for accessing the service bus and also for diagnostic purposes I have included the service registry element. Hopefully if you are familiar with using Windows Azure Service Bus relay feature the above is very familiar to you and this is a very common setup for this section. There is nothing specific to the username token implementation here. The Service Behaviour Now we come to the bit with most of the username token bits in it. When you configure the service behavior I have included the serviceCredentials element and then setup to use userNameAuthentication and you can see that I have created my own custom username token validator.   This setup means that WCF will hand off to my class for validating the username token details. I have also added the serviceSecurityAudit element to give me a simple auditing of access capability. My UsernamePassword Validator The below picture shows you the details of the username password validator class I have implemented. WCF will hand off to this class when validating the token and give me a nice way to check the token credentials against an on-premise store. You have all of the validation features with a non-service bus WCF implementation available such as validating the username password against active directory or ASP.net membership features or as in my case above something much simpler.   The Client Now let's take a look at the client side of this solution and how we can configure the client to authenticate against ACS but also send a username token over to the service component so it can implement additional security checks on-premise. I have a console application and in the program class I want to use the proxy generated with Add Service Reference to send a message via the Azure Service Bus. You can see in my WCF client configuration below I have setup my details for the azure service bus url and am using the ws2007HttpRelayBinding. Next is my configuration for the relay binding. You can see below I have configured security to use TransportWithMessageCredential so we will flow the username token with the message and also the RelayAccessToken relayClientAuthenticationType which means the component will validate against ACS before being allowed to access the relay endpoint to send a message.     After the binding we need to configure the endpoint behavior like in the below picture. This is the normal configuration to use a shared secret for accessing a Service Bus endpoint.   Finally below we have the code of the client in the console application which will call the service bus. You can see that we have created our proxy and then made a normal call to a WCF service but this time we have also set the ClientCredentials to use the appropriate username and password which will be flown through the service bus and to our service which will validate them.     Conclusion As you can see from the above walkthrough it is not too difficult to configure a service to use both a shared secret and username token at the same time. This gives you the power and protection offered by the access control service in the cloud but also the ability to flow additional tokens to the on-premise component for additional security features to be implemented. Sample The sample used in this post is available at the following location: https://s3.amazonaws.com/CSCBlogSamples/Acme.Azure.ServiceBus.Poc.UN.zip

  Read the article

< Previous Page | 516 517 518 519 520 521 522 523 524 525 526 527  | Next Page >