Search Results

Search found 15926 results on 638 pages for 'business card'.

Page 520/638 | < Previous Page | 516 517 518 519 520 521 522 523 524 525 526 527  | Next Page >

• Strange Internet Connection issues

  - by Nodren

  I'm attempting to troubleshoot problems with a laptop computer(HP 8510w) while it's connected to a server of mine via Remote Desktop. I double checked all the settings on the win2k3 server for remote desktop to verify that remote desktop isn't what's causing the disconnect issues, and other people using different computers/laptops can all connect to remote desktop correctly with no issues. These problems happen specifically when the laptop is connected via wifi(several different wifi sources, so it's not an ISP issue) as well as connected via a Verizon data card. However there's no network downtime when the laptop is resting in the docking station and plugged into the network with the remote desktop server. These problems have also only recently occurred since a recent hard drive failure in which a new hard drive was purchased and the laptop had a fresh install of windows xp professional. There's no special software used on this machine, just office 2003. So my question is, what could cause two types of internet access to fail while other types do not? If it is infact related to the win2k3 server, why is this particular laptop getting disconnected when others are not and are all on at the same time?

  Read the article

• Computer does not boot after ram upgrade

  - by Calmarius

  I have a Dell Optiplex GX520 desktop (it's abount 5 yr old) PC with 512 MB DDR2 RAM. Since my computer always swapping I thought I should upgrade my RAM. I bought a Kingmax 2GB DDR2 RAM. But my system does not boot. The status leds are on 2 and 4. The user manual says 'video card failure' wtf? I put back the original module and everything works. I tried many combinations. When I leave the old 512 RAM in and put the 2GB next to it to the other socket my system completes the POST and I'm able to enter the BIOS menu. It says my system has 2.5 GB installed, one 0.5GB and one 2GB in dual asymmetric channel mode. It's seemingly right. Exiting the BIOS setup GRUB loads successfully, but when I try to boot Ubuntu it crashes with kernel panic immediately. Trying to load Windows XP does not get past the loading screen, it crashes with 0x8E stop error. Does this mean the ram I bought is faulty? Or is it just mean that the memory module I bought is too new to be handled my computer? I this case I may exchange the RAM with my friends. No other computer is in my house (my very old box has DDR1 ram, my systers new box has DDR3 ones. I can't plug my memory in neither one.) I'm going to return the RAM to store to replace it with a better one tomorrow. Is there any hope to get this new module work?

  Read the article

• Linux on HP Envy

  - by Oscar Godson

  OK, the Ubuntu forums aren't helping and I thought maybe you guys here could help. First off, does anyone know the best flavor of Linux to use on an HP Envy? what has the best support out of the box? If not, does anyone know how the hell to get the following to work on Ubuntu 10.04: The touchpad to work at all? Right now, right clicking doesnt work at at all, and left clicks dont work while you have another finger on the pad at all. It jumps all over. ALSO, the multi-touch isn't clickable, but it's for sure a multi-touch touchpad. Works in W7 and can do things like a MBP in W7 The computer feels like it's on fire... i think im missing some driver. Seems odd that the random meta keys like calc, email, brightness, right click, etc work, but not the touchpad? The video card seems fine, but i haven't tested compiz fully yet... Thanks so much to anyone who helps. i want to get back to linux after a couple years on Mac. :)

  Read the article

• (manually configured) kernel update leaves wireless in a mess

  - by Mala

  I recently upgraded my kernel from 2.6.31-gentoo-r6 to 2.6.32-gentoo-r7. In both cases, I configured everything manually. However, since the upgrade, my wireless card appears to be on the fritz. It will connect to networks just fine, and remain connected, but can only access the internet (and other hosts on the network) for about 3 seconds after connecting. Reconnecting to the network appears to fix the problem... for another 3 seconds or so. The problem is "solved" by booting into the older kernel. The relevant lspci entry is 02:00.0 Network controller: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection I'm pretty sure I have the correct drivers enabled in the kernel Device Drivers ---> Network device support ---> Wireless LAN (IEEE 802.11) ---> <*> Intel Wireless Wifi [*] Enable LED support in iwlagn and iwl3945 drivers [*] Enable Spectrum Measurement in iwlagn driver [*] Enable full debugging output in iwlagn and iwl3945 drivers <*> Intel Wireless WiFi Next Gen AGN (iwlagn) [*] Intel Wireless WiFi 4965AGN [*] Intel Wireless WiFi 5000AGN; Intel WiFi Link 1000, 6000, and 6050 Series I tried with the other intel drivers enabled as well (iwl3945) and no difference. Is there something stupid I'm missing? Is there something I have to recompile after upgrading the kernel (a la nvidia)? Thanks Mala

  Read the article

• What kernel modules are required for wi-fi to work?

  - by Leonid Shevtsov

  My custom-built 2.6.32 kernel cannot connect to any WPA-protected network. The kernel includes (probably?) everything that should be needed for wifi, including IPv4 network support (IPv6 is disabled), the ath5k wireless driver (which is used in the generic Ubuntu 2.6.31 kernel) and all crypto APIs. The card is being detected, however, iwlist scan returns wlan0 Failed to read scan data : Network is down and network-manager log says <info> (wlan0): driver supports SSID scans (scan_capa 0x01). <info> (wlan0): new 802.11 WiFi device (driver: 'ath5k') <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1 <info> (wlan0): now managed <info> (wlan0): device state change: 1 -> 2 (reason 2) <info> (wlan0): bringing up device. <info> (wlan0): preparing device. <info> (wlan0): deactivating device (reason: 2). supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed <info> modem-manager is now available <WARN> default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files <info> Trying to start the supplicant... <info> (wlan0): supplicant manager state: down -> idle <info> (wlan0): device state change: 2 -> 3 (reason 0) <WARN> nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface. The exact same configuration works with the generic kernel. Is anything except wifi and crypto api needed for wi-fi to work?

  Read the article

• linux keeps disconnecting from wireless network

  - by Matteo Ceccarello

  I'm running Arch Linux on an Acer laptop and my wirless connection doesn't stay up. After a while it disconnects, and when I try to reconnect I get stuck with a "Waiting for authorization" message. I have to retry several times before getting the connection stay up for few minutes. This happens with both networkmanager and wicd. The strange thing is that the iMac that sits next to the laptop connects fine, and when I use my laptop within the university wireless network it works normally. How can I solve this problem? EDIT: I've tried to connect manually following the steps iwlist wlan0 scan wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf dhcpcd wlan0 and it works, I can ping google. However, looking to wpa supplicant output I see that it keeps connecting and disconnecting. I'm using WPA2, and this seems to be a problem in authentication. EDIT 2: as pointed out in the answers I forgot to mention my hardware/software specifications: kernel: Linux 3.0-ARCH wireless card: # lspci | grep -i net 07:00.0 Network controller: Intel Corporation WiFi Link 5100 module used # lsmod | grep -i 80211 mac80211 216021 1 iwlagn I use a Netgear DGN1000 modem/router My dmseg output is shown here http://pastebin.com/8Tf7iage

  Read the article

• Where is my problem? The P6X58D Premium Mobo, Windows 7, or other?

  - by Dylan Yaga

  I was having problems with my USB devices for an hour last night, and I am unable to determine the root cause of the problem. The two symptoms are: At seemingly random times (not consistently spaced by time or caused by any detectable event) my USB devices become "detached". Windows will play the USB disconnect sound and then the reconnect sound. The devices disconnected and then reconnected. My USB Keyboard will "stick" on one key for several seconds before processing any other keystroke made. The mouse also does not respond to clicks. I do not lose mouse movement or USB device connectivity. And after a moment of this several beeps will be emitted from the speakers. Hardware Specs: GFX Card: EVGA GeForce GTX 470 Superclocked 1280MB DDR5 PCIe Motherboard: ASUS P6X58D Premium Intel X58 Socket LGA1366 MB Processor: Intel Core i7-920 2.66Ghz 8M LGA1366 CPU Memory: Corsair Dominator 6144MB PC12800 DDR3 Storage: Hitachi 1TB Serial ATA HD 1600MHz 7200/32MB/SATA-3G Cooling: Corsair Hydro H50 CPU Liquid Cooler Case: Corsair Obsidian 800D Full Tower Case Power Supply: Corsair HX1000W 1000W Modular Power Supply Steps I have taken to narrow down the problem: Restarted the computer. - No change Changed USB port the Hub was connected to on the CPU. - No change Removed all devices from USB Hub and connected directly to CPU. - No change Used a different USB keyboard both in USB Hub and directly to CPU. - No change Disconnected and reconnected all cables. - No change Disassembled the Tower and determined if the USB headers were firmly connected. - No change Checked device manager for errors. Checked all USB devices. - Nothing flagged After an hour of frustration trying to narrow down the problem it appeared to disappear. But I am torn between it being a Mobo problem or an OS problem. Is there anything else I can do to narrow down the problem before a reformat and then eventually exchanging the Mobo?

  Read the article

• AGP 4x slot running at 2x

  - by Wesley

  Hi all, Here are the specs of the machine related to this question: AMD Athlon XP 2400+ @ 2 GHz / 2x 512MB PC3200 DDR RAM / 3D Fuzion 128MB GeForce 6200 AGP / WD 160GB IDE HDD / FIC AM37 (mobo) / Codegen 350W PSU / Windows XP Pro SP3 So, for some odd reason, the GeForce 6200 that is in the AGP 4x slot is not running at 4x, but 2x. The card itself supports AGP 4x and even 8x. When I enter the BIOS, the options for the AGP slot only allow 2x as the max. Before, the max option for the AGP slot in the BIOS was 4x. (I do get the 4x option after I reset CMOS, but it does not stick after a restart.) I don't exactly know what the problem could be, but a few weeks ago, this machine's hard drive was reformatted and got a fresh install of XP. Also, I did install Rivatuner, but I never overclocked it at all. (I uninstalled it after thinking that it had done something.) Otherwise, I cannot figure out the cause of the problem. Does anybody have an idea why this is happening? (Would I have to do another reformat?) Thanks in advance. PS: the other options for the AGP slot are aperture size (which I tried changing, but it did nothing) and FastWrite (enabled by default).

  Read the article

• Windows 7 Won't Boot

  - by Vie

  I recently built a new computer, my fifth one. ASUS Maximus III Formula LGA 1156 Intel P55 ATX Motherboard EVGA 01G-P3-1452-TR GeForce GTS 450 Superclocked 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Video Card COOLMAX RM-1000B 1000W ATX psu Intel Core i7-875K lynnfield 2.93GHz LGA 1156 95w Quad-Core unlocked processor G.SKILL Ripjaws Series 16 (4x4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) memory WD VelociRaptor WD3000GLFS 300gb 10000 RPM SATA 3.0Gb/s Hard Drive Sony Optiarc CD/DVD Burner model AD-7261S-0B LightScribe Windows 7 Home Premium 64-bit It gets hung up on the starting windows screen. When I went to install the OS it did the same thing wouldn't go past the windows logo, so I put the new HDD into my old computer and installed windows 7 thinking it was just an installer error. Put the fully installed HDD back into my new machine and it still gets stuck on the starting windows screen. I've tried most everything I've looked up. Disabled USB, Disabled Turbo Boost, Disabled everything that wasn't essential(just about every configuration I can think of), took it apart and put it back together, took all the ram out save one 4g stick(wouldn't even boot when I did this), did a memory scan which came back successful, I don't know what could be wrong. Only thing I can think of is a compatibility issue somewhere, but I've ran over it again and again and I don't know where there would be an issue like that. Need Backup! .<

  Read the article

• How do I setup JBoss 5.1.0.GA to run multiple instances?

  - by djangofan

  Does anyone have any experience or advice in setting up multiple JBoss 5.1.x instances on the same machine that has 1 network card? Here is what I did: Installed JBoss 5.1.0.GA into c:\myjboss 1.5. I copied the server/default directory to server/ports-01 and server/ports-02 so they have their own config. did I assume correctly? Ran .\run.bat -c ports-01 Ran .\run.bat -c ports-02 At this point there are 2 instances but the second instance doesn't load correctly because of what is probably a few port conflicts. For example: the http port ends up being 8080 for both instances, which it gets from line #49 in the C:\myjboss\server\all\conf\bindingservice.beans\META-INF\bindings-jboss-beans.xml file. Earlier in the server load it clearly gets the value from line#63 in that same file. I don't know why it gets part of the port config from line #49 and the other part from line#63. Confused. I also tried: .\run.bat -Djboss.service.binding.set=ports-01 -c ports-01 and it made little difference. Any ideas on what I am doing wrong?

  Read the article

• using a second computer as a mere screen/monitor in X (VNC?)

  - by lara michaels

  Hello My goal is to use three monitors with my Linux system. It is a laptop, so adding another video card is not the easiest solution. (I have investigated a number of such options: getting a docking station with a PCI slot, USB/Cardbus vga adapters, etc, and for the time being don't want to go that way.) I am wondering if using an older desktop+screen I have lying around as the third "monitor" might be the easiest solution, if only there is a way to get it to work as a seamless, integrated desktop. I was wondering if I can use VNC or perhaps X itself (?) to achieve the following: computer A is my main computer; it has all my files, etc. computer B is used just to display on an additional screen keyboard+mouse are connected to computer A use VNC or X to connect the two so that computer B shows a X screen that is just as if it was a third physical screen connected to computer A. I don't know if the last point is clear, but what I mean is that I would like to be able to: be able to have my window manager assign/move around virtual desktops on all three screens move windows back and forth between the screens attached to computer A and the screen of computer B be able to copy something in an app being shown on a screen of computer A and paste it into an app being shown on the screen attached to computer B access the filesystem on my main computer (A) when using applications that are being shown on the screen attached to computer B Basically, I would like X to treat computer B just like it was nothing but a third physical screen... Is this doable? : ) ~lara

  Read the article

• Looking for Remote Control that works with everything (even Windows 7 Media Center)

  - by T Reddy

  Using my Google-Fu, it seems that the most basic of things one gets with any DVR is the remote control. Had I known it would be difficult just to get a consumer IR receiver for Windows 7 I may not have bothered to build an HTPC. But too late, I already have the HTPC ready to go (minus the CETON card...) So I'm moving away from TiVo, I hate paying the monthly fees and my box is ancient. I'm looking for these solutions to my HTCP setup...I want to: Switch audio from HDMI to SPDIF via the remote control (i.e., switch from TV to Receiver) (as a side note, the built-in audio on the mobo has software to do this). Pressing the volume button on the remote will always change the TV's volume (or the Receiver's if possible) and NOT the PC's volume. The remote/receiver works well around 25 feet. Bonus if the IR Receiver can work with my existing TiVo remote (or other remotes laying around the house) I read a review of the Bluetooth TiVo remote...it sounds promising...but I'm not sure if it is great for Windows 7 HTPC?

  Read the article

• Data Store/Volume disconnecting. How to resume copy of VMDK?

  - by Serge

  I'm having an issue with my ESXi 4.1 hosts losing the datastore with FC SAN after a power outage. All 3 hosts disconnect so it's definitely a SAN issue. I've tried to resolve the issue on the SAN side with the SAN software support and Adaptec hardware support. No luck there. So I'm stuck with a SAN that will randomly disconnect the volume. I need to get the virtual machines (VMDK files) from the datastore. The problem is I can only get 5-20% before the data store disconnects. I have backups that are slightly older that I can use to replicate the VMDK differences to. What has not worked so far: Powering up the VMs, will boot up for 5-15 minutes then freeze vCenter migrate or clone of VM, will fail after similar period of time vCenter copy/paste of VMDK. Was able to get one 30GB VMDK and no luck after that. vMware Data Recovery. Fails at low %, can't resume, so next backup starts from begining. Veeam Backup & Recovery. Same as above, no resume function. If I can just find a backup solution that will resume from the failed spot that would solve my issue. Anyone have any ideas that I could try? EDIT 1 The SAN is Open-E DSS 6 running on a Supermicro 24 drive enclosure with 4 port Qlogic FC. Adaptec 52445 RAID card.

  Read the article

• No video signal at boot with custom built computer

  - by Bart Pelle

  After booting my custom built computer, neither the VGA nor the HDMI methods from the video card seem to emit any signal to the display. I have tested both a regular VGA screen and a modern HDMI screen. Both did not receive signal. Below are the specifications from my computer build: Intel Core i5 3350P ASRock B75 Pro 3-M Seagate Barracuda 7200.14 ST1000 DM003 1000GB Corsair Vengeance LP CML 8GX 3M2 A1600 CGB Blue (2 cards) Cooler Master B Series B600 Club 3D Radeon HD7870 XT Jokercard Samsung SH-224 BB Black Sharkoon T28 Case The motherboard does not emit any beeps on startup. The CD tray opens properly and all fans spin. All cables are properly connected. All components are new and no damage was found on any of the components. The fans on the GPU spin aswell. The VGA test we did was by using the onboard graphics from the Intel i5, but this gave no result. The HDMI test was from the GPU which did not emit any signal either. We have not been able to test out the DVI, could this be important to test, even though all the other methods did not work? Thank you for your time and hopefully reply.

  Read the article

• In an environment with multiple WiFi access points, do wireless clients sometimes connect to both at the same time?

  - by Bobby Burgess

  This is more of a curiosity than a problem, but in this new office I have two D-link DAP-2553's connected in a master/slave array (this just means the master keeps certain configuration options aligned with the slave). The network is set to 802.11n-only, and each AP has the same SSID and WPA2 key. The only difference is that they are on different channels (1 and 11). The WiFi network itself is working well. Users can roam around and the signal/speed is fairly consistent. However, I notice that when I look at the 802.11 client list in the web admin page for each of the 2 APs, I see that certain clients are connected to both, for extended periods of time, but I assume they are only passing data through one of them. Not every client is seen on each AP, but at any given time the same MAC address of a WiFi adapter can be associated (and remain associated) with both APs. The client list auto-refreshes every few seconds so I believe I'm looking at the most recent rather than stale information. One of the WiFi adapters that consistently associates with both APs is an Intel Centrino Wireless-N 1030 (laptop chip). Is it part of the WiFi standard that more than one association per WiFi card can be established concurrently on separate APS?

  Read the article

• WWNs,WWPNs and Fibre Channel addresses

  - by user238230

  Lots of contradictory on these subjects and I don't know why. My first question is about the 64 bit WWN. One reference claims the terms WWN and WWPN are synonymous. An online source seems to refute this. They say: A WWPN (world wide port name) is the unique identifier for a fibre channel port where a WWN (world wide name) the unique identifier for the node itself. A good example is a dual port HBA. There will be two WWPN's (one for each port) and only a single WWN for the card itself. Question #1: Which is correct? I’m almost positive I read that every “Port” has a WWN. My next question is about the 24 bit FC address that is dynamically allocated to a port when it is introduced to the switch. The Domain ID field is defined as: "a unique number provided to each switch in the fabric." Question #2: Do Domain IDs only apply to switch ports? For example what would the Domain ID be for a HBA? None? The same as the switch port it is connected to? Question #3: My last question is about the Name Server of a switch. A book example shows the routing of a message through the switch. It uses the WWNs of the source and destination ports to route the message. I am assuming that the Name Server must associate the WWN and the FC address in some way in order to route the message, correct?

  Read the article

• New to building computers worried about temps

  - by dave

  I'm new to building my own computers and I was wondering about maximum temperatures. I understand that the room temp can affect the computers temp but how relevent is it? I understand that if my room temp is 20°C none of my computer parts could be lower than that. But if my room is 27°C instead of 20°C would this cause my computers parts to heat up more/faster? My new computer I built myself for gaming is i7 2600k 16gb ram ddr3 1600 hd6970 2 gb 240gb ssd ( bought a nas with 3 2tb drives in raid 5 for my home network ) 850w modular psu I also have my old hp computer i3 2120 8gb ram hd6770 1tb hdd I also have 3 laptops in my household, but I am not worried about their temps, they heat up my legs but they are never under stress. Due to size and money reasons I used an old case and it only has one of the sides left on it. Is this bad for the computer and will the extra dust cause problems? Or should I leave it this way or take the missus wrath and buy a case? If so is there any certain case I should get? I don't care about looks I just want card reader and usb slots and for it to run as cool or cooler than now, my case has 1 fan. Also what are the max temps for my new and old computer parts? Is 40°C under load ok for my CPU, what about 70°C for my GPU is that ok too, or should I worry? What are normal and safe temps for my components? I have looked around but there seem to be lots of different answers. I know that 100°C is bad but I want my parts to last as long as possible and this site always seems to give good replies without arguing or flaming.

  Read the article

• Daisy-chainable DisplayPort Monitors

  - by thepurplepixel

  I am the proud new owner of a MacBook Pro with a mini-DisplayPort. My desk setup used to allow me to position the screen of my old MacBook beside an external monitor, essentially allowing dual-head. It was also advantageous that my old MBP and my external monitor had the same resolution, 1440x900. Now, I'm searching for a set of two monitors that I can use a HengeDock with. Unfortunately, the MacBook Pro suffers from having only one mini-DisplayPort. Looking up the spec for DisplayPort 1.2 (which the MBP supports), DisplayPort daisy chaining is supported. What I'm looking for is a monitor that has two DisplayPorts so I can daisy chain two monitors off the single mini-DisplayPort. What I don't want is a USB-based video solution. I need full acceleration on both monitors; an external video card won't cut it. I hope I don't have to wait a few years for these monitors to come out. TL;DR: I need two monitors with two DisplayPorts each that I can daisy-chain. Thanks!

  Read the article

• Kindly guide me to buy a new laptop [on hold]

  - by Its me 007

  I am from India. I want to buy a new laptop. Shortlisted few but confused between which processor,Chip set and Graphics will be the best suited for my requirements. NOTE: NOT ABLE TO POST THE LINKS YOU WILL HAVE TO COPY PASTE IT. SORRY. 1) HP Pavilion 15-N004TX - 4th Gen CI5 - 4200U/4GB RAM/500 GB HDD/ 1GB Radeon Graphic - Rs 39990 www.homeshop18.com/hp-pavilion-15-n004tx-laptop-4th-gen-intel-core-i5-4200u-4gb-500gb-15-6-linux-silver-black/computers-tablets/laptops/product:30989197/cid:16317/ 2) Lenovo Essential G510 (59-398452) - 4th Gen Ci5 4200M/ 4GB/ 500 GB/Win8/2GB Graph ATI Sunpro 8570 - Rs 44969 www.flipkart.com/lenovo-essential-g510-59-398452-laptop-4th-gen-ci5-4gb-500gb-win8-2gb-graph/p/itmdp26eprwf5k5v?gclid=CMnh99GA2LoCFaRU4godNiUAGQ&semcmpid=sem_7847244212_laptopsnew_goog&tgi=sem%2C1%2CG%2C7847244212%2Cg%2Csearch%2C%2C24387103114%2C1t1%2Cb%2C%2Blenovo+%2Bg510%2F59+%2B398452%2Cc%2C%2C%2C%2C%2C%2C%2C2 3) HP Pavilion G6-2303TX Laptop (3rd Gen Ci5 3230M/ 4GB/ 500GB/ DOS/ 1GB Graph) - Rs 40500 www.flipkart.com/hp-pavilion-g6-2303tx-laptop-3rd-gen-ci5-4gb-500gb-dos-1gb-graph/p/itmdm6yzh4gr4cxd?pid=COMDM6YHWMGDRDEZ&ref=1d2b85fc-a03d-4c7d-844b-ec9e8dc95a81 4) HP Pavilion 15-E039TX Laptop (3rd Gen Ci5 3230M/ 4GB/ 1TB/ Win8/ 2GB Graph) - Rs 46690 www.flipkart.com/hp-pavilion-15-e039tx-laptop-3rd-gen-ci5-4gb-1tb-win8-2gb-graph/p/itmdn4d9wykhdcpz?pid=COMDN4CZGFMGJNTN&ref=1d2b85fc-a03d-4c7d-844b-ec9e8dc95a81 Now I am confused between: Which Processor and chipset is best? How much graphic card is enough? (Not a gamer) Is any of this laptop future proof i.e. it should at least support upcoming latest programming softwares which eats more processor and memory. Laptop will be mainly used for multiprocessing.It should be at least capable for following: Visual Studio 2012 and the upcoming versions for at least 4 years SQL server 2008 R2 and above Sharepoint Blend Photoshop Kindly suggest. If anyone know any good laptop with good configuration in the 50k budget kindly suggest. Thanks in advance.

  Read the article

• UPS power requirements for server

  - by captainentropy

  Greetings! So, I just placed an order for a new server. The company recommended that I get a 3000W UPS. (!) As best as I could I calculated the following wattage consumption based on benchmarked data or datasheets provided by the manufacturers of each component: number watts **total watts** MoBo 1 240 240 CPUs (E5540) 2 80 160 RAID cards (3ware) 2 18 36 RAM (6x4GB) 6 3 18 DVD drive 1 7 7 floppy 1 2 2 RE4 drives 8 7 56 WD20 drives 8 6 48 Intel X25 SSD 2 0.15 0.3 total = 567 So that is for the PSU requirements only. The PSUs in the machine are a 720W for the master node and 800W each for two subsystems. That's a total of 2320W that can be delivered by these PSUs. But that is 4X the amount being consumed, at most, by the components. I didn't count case fans or the eSATA card (3W maybe?) or what the PSUs themselves require but assuming I double or triple my calculations I'm not even remotely close to the 3000W UPS I was suggested to get. They run at least $1100. I could get a 2000W for about $750 or a 1500W for $450 and still be well over my estimated power need. I don't think I need a whole lot of run time in the case of a power outage, maybe 20 minutes max, enough time to shutdown if the power doesn't come on within 5-10 minutes. Any thoughts? Am I off on my calculations? Did I overlook something major? If so what are your suggestions for a UPS? Thanks!

  Read the article

• DPMS does not work: the monitor is not switched off

  - by bortzmeyer

  I have a monitor which was properly switched off by my Debian PC when unused. I attached it to another machine and, this times, it is never switched off. In /etc/X11/xorg.conf, I have: Section "Monitor" Identifier "Generic Monitor" Option "DPMS" It is recognized when X11 starts: (II) Loading extension DPMS ... (II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display ... (**) Option "dpms" (**) VESA(0): DPMS enabled The operating system is Debian stable "lenny". The graphics card is: 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrate d Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 2a6f Flags: bus master, fast devsel, latency 0, IRQ 5 Memory at fe900000 (32-bit, non-prefetchable) [size=512K] I/O ports at b080 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fe800000 (32-bit, non-prefetchable) [size=1M] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-Capabilities: [d0] Power Management version 2 X11 is: X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2) Current Operating System: Linux ludwigVII 2.6.26-2-686 #1 SMP Sun Jun 21 04:57:3 8 UTC 2009 i686 Build Date: 08 June 2009 09:12:57AM

  Read the article

• Hyper-V: Dedicated NIC for Guests VMs

  - by TheLizardKing

  I have two NIC cards and created a private virtual network for my virtual machines and unchecked "Allow management operating system to share this network adapter" which basically turns my Guest NIC into this sorta shell of a NIC card on the host machine and the only thing checked in it's properties is "Microsoft Virtual Network Switch Protocol" which I am fine with. Everything works and everything is connected. My issue is that for some reason my guest (Ubuntu Server with legacy network drivers) is not talking properly to my DHCP server. Specifically my DHCP server reserves the guest's IP address using it's MAC address but the guest isn't picking it up. It's picking up any old IP it can get and I can't even ping the hostname from another PC on the network but it pings fine if I use the IP. I see the guest showing up in my DHCP table but I can't get the reservation to stick. Is there some reason it's only partially communicating with my DHCP server? Pinging it's hostname on itself reveals it's using 127.0.0.1 instead of it's network IP. Is this an issue with the legacy drivers used in Hyper-V?

  Read the article

• COMPAQ Tower No Signal to monitor

  - by Lancelot

  I received a Compaq tower: Compaq Presario SR1224NX Onboard VGA Windows XP SP2 from a friend. My plan was to turn this into an Ubuntu Server. It booted up with no problems even with the Ubuntu live disc. After a normal shutdown (not unplugging the power cord and not doing a hard shutdown with the power button), it would not restart even after SEVERAL attempts. I realized the light next to the power supply would flash very rapidly. I researched and found out it was one of two things: a dead power supply or the cables to the motherboard and to the disks might be faulty, etc. Thus, I checked to ensure the cables were fine(and they were). I purchased a Power Supply (this one has 400 watts, the initial had 250) and installed it. The tower was able to boot into the live disk and everything. After a normal shutdown, it now restarts but is not sending signal to my monitor. I have tried several monitors in which I know work perfectly but not with this tower (I recall that it did show display after replacing the power supply). The monitors are ACER. This is different than most "no Signal" problems since I am not using an external Video Card, this is onboard VGA.

  Read the article

• Desktop PC does not power up on power button

  - by hIpPy

  When I press the power button on my desktop, it does not power up completely. Before I press the power button, I see lights on the motherboard. Everything is normal. On power button press, the fans on the cpu, graphics card and motherboard start to spin a little for a second or two and then they stop. No beeps during this process. It has been doing this for a while now but it used to start up after some trials. Once it starts up, I have NO issues at all like random shutdowns so it is not an issue with OS. Update: I left the desktop off for a few days and it started. I'm just guessing here but it seems as if the PSU (Antec TP2-550ATX) is dying out and does not have enough power now - just a guess. It's an old desktop assembled in 2005 but I have maintained it well. Update: I always keep the desktop running and I never shut it down. During updates or manual restarts, it powers up without issues. I wonder if this sheds lights on the issue. Any idea how I can narrow down the issue? ex: if I can find if the PSU is dying etc. I'd really like to fix the issue. Please help. Thanks. Below is the complete configuration. DFI LAN-Party UT NF4 Ultra-D 6/23 {6.70}, Evercool EC-VC-RE 41/47C, AMD Opteron 170 2.0GHz {1.3.2.16} 1.312V 36/41C, ThermalRight SI-120, Panaflo 120×38mm OCZ Platinum 2×1GB 200MHz 2.66V 3-3-2-7 1T XFX 7800GTX 256MB 475/1250MHz {91.31}, Zalman VF900 Cu led 41/56C WD Caviar 320GB 7200RPM 16MB SATA 3Gb/s Antec TP2-550ATX Antec P180 WinXP sp3 Logitech MX310 Razer Mantis Speed BenQ FP91G+ 19" LCD 8ms DVI Creative Audigy2 ZS {4.42} BenQ DW1640 Logitech z-5300e 5.1 280W Legend: Driver versions: {} User settings: [] Voltage: V Wattage: W Temperature: C (Celsius) min/max

  Read the article

• Why do manufacturers not show all hardware power usage?

  - by Drew

  I find it slightly more difficult to build a computer when I do not know how much power is needed for a component. When selecting a power supply for a computer, it is difficult to know how large of one to get. You don't want to go too large for cost reasons and circuit reasons, but you don't want to go too low and not be able to properly use every component. For instance, a graphics card might say "Minimum of a 500 Watt power supply. (Minimum recommended power supply with +12 Volt current rating of 30 Amps.)" But it really needs 360W (12V * 30A). So why don't they just say "Uses 360W max and xxxW peak"? Processors, I have noticed are good at reporting their power usage, but aside from processors and sometimes graphics cards, power usage is easily found. What is the power consumed by the Blu-ray / DVD drives? By the HDDs/SSDs? By the Mobo? etc. Why are these questions not easily answered when building a machine?

  Read the article

< Previous Page | 516 517 518 519 520 521 522 523 524 525 526 527  | Next Page >