Search Results

Search found 16560 results on 663 pages for 'high tech resources'.

Page 521/663 | < Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528  | Next Page >

• linux mint VIA sound issue

  - by user2699451

  So I installed linux Mint 15 "Olivia" 64 bit on my Mecer W550EU laptop I have HD Audio with a VIA chipset charles-W55xEU charles # lsmod | grep snd snd_hda_codec_hdmi 36913 1 snd_hda_codec_via 51018 1 snd_hda_intel 39619 5 snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 97451 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 19 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device soundcore 12680 1 snd And my sound card charles-W55xEU charles # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: VT1802 Analog [VT1802 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 2: VT1802 HP [VT1802 HP] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 and my audio device charles-W55xEU charles # lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High `Definition Audio Controller (rev 04)` Subsystem: CLEVO/KAPOK Computer Device 0550 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7c10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Sometimes when I boot up, soundworks, other times it doenst, it is completely random, so far, no-one on xchat linux help or linux mint forums was able to help me, I have always had issues with sound on VIA chipsets I have: sudo apt-get upgrade && apt-get install mint-meta-cinnamon it seemed to help but after 2-3 reboots, the problem came back, btw, everytime I checked, pulse audio is selected to Duplex Audio Input & Output and alsa mixer is always unmuted!

  Read the article

• Mac Mini drive problems but SMART verified: bad hard drive or controller?

  - by Zac Thompson

  I have a 3-year-old Intel Mac Mini at home. About a month ago, it stopped booting from the hard drive (internal, SATA, 80GB). I tried booting from the Install Disc to repair the filesystem but Disk Utility was unable to do so ("invalid node structure"). I was also unable to use the hard drive in the Terminal from the Install Disc nor from an Ubuntu boot CD ("DRDY err"). I could see the contents of some directories, but others would give an error and I would get failures when trying to copy files. At this point I was sure the filesystem was hosed and I'd want to reformat at least. DiskWarrior was able to let me retrieve the data files I was interested in, which are now copied to an external hard drive, but it reported a high number of problems ("speed reduced by disk malfunction" count was over 2000) when in the process of trying to rebuild the directory for the drive. It also would not let me use the rebuilt directory to replace the one on the drive; it claimed the disk errors prevented recovery in this way. Under normal circumstances I would now assume that the drive itself was going bad: DiskWarrior's "disk malfunction" error above is supposed to imply hardware problems. My initial plan was to buy a replacement for the internal 2.5" drive. However: Disk Utility, command-line tools and DiskWarrior had reported all along that the SMART status of the drive was okay/Verified. So I'm now worried that the drive hardware is actually fine, and that the problems were due to a disk controller that has gone "bad" somehow. If this is the case, I'll probably just replace the whole computer. Any advice on how I can tell what is to blame? I don't have a lot of extra hardware sitting around, so I don't have the option of simply dropping the drive in another machine or popping another hard drive inside the Mini.

  Read the article

• Talk on multiple IRC channels at once?

  - by TwoPixelGrid

  I seem to remember, back in '91 or so, that the console-based IRCII implemention on the Solaris box that first got me on the net would let me /Join multiple channels on a given network such that, as new channels were joined, they would start scrolling to the single console view. Let's call it the 'interleaved conversation' chat paradigm. Am I rembering this correctly? More importantly, is there a modern way of doing this in any of the GUI-based clients? I'm surprised this isn't a common desire/feature because I think it would greatly improve the experience, especially on channels with high SNR. For example, If I'm working on a project I may connect to Freenode and join : #Qt,#OpenGL,#C++. As it is now, with mIRC,Xchat, I have to manually flip between pages just to see whats being said and to reply. What I envision would go more like this (using only 2 channels for simplicity) /join #QT #OpenGL < [QT] QtChannelUser: Hello TwoPixelGrid. < [OpenGL] OpenGLChannelUser: Hi there TwoPixelGrid. @QT: Hi QtChannelUser @OpenGL: Hello againOpenGLChannelUser And this message is going out to all my channels. Do I have to write a new client or is this already out there?

  Read the article

• CSV engine on MySQL server

  - by Jeff

  I don't think that this is a programming question so I am going to ask it here - Reading the book high performance mysql, I read about the CSV engine. The paragraph says: The CSV engine can treat comma-separated values (CSV) files as table, but it does not support indexes on them. This engine lets you copy files in and out of the database while the server is running. If you export a CSV file from a spreadsheet and save it in the MySQL server's data directory, the server can read it immediately. Similary, if you write data to a CSV table, an external program can read it right away. CSV tables are especially useful as a data interchange format and for certain kinds of logging. What I get from this paragraph is that I can copy a .CSV file into the data directory of database, and it should show as a table that is able to be read from. However, whenever I copy a test .csv file into the directory, it does not appear as a table. I can't access it. I am using MySQL 5.5 also Does anyone know why this is not working, or what I am doing wrong? Thanks

  Read the article

• I/O APIC on Virtualbox

  - by RidDeBakTiYar

  I'm trying to use the PIT to do APIC timer calibration, and I want to use the PIT through I/O APIC instead of PIC. On Bochs I get interrupts from the PIT at the asked frequency from the I/O APIC, while on Virtualbox I can't receive a single interrupt. It must be an I/O APIC configuration problem because as I unmask the first PIC entry, the IRQ fires. However that's not what I want. Can you imagine any possible condition that wouldn't make Virtualbox fire the IRQ? I'm not assuming single I/O APIC configuration (even though Virtualbox has only 1). I'm not assuming identity mappings between ISA IRQs and I/O APIC GSIs (using ACPI MADT table to get I/O APIC base address and Int override). I'm setting the Trigger Mode and Polarity bits correctly (on Virtualbox they are set as '00 - default' which means edge high right?). I'm putting the BSP APIC ID into the Destination field (using Physical destination) and vector 0x20. Being the BSP APIC ID 0 on Virtualbox, it ends up with 0x0000000000000020 written to the IOREDTBL. And, just in case I'm getting the wrong values from the Interrupt Override descriptor, I'm setting this value to all the IOREDTBL entries (I know this is very very bad, and it wont be kept as I understand what's going on). The only thing I didn't check out is Local APIC configuration. Actually I'm not writing any value to the BSP LAPIC. Just reading the APIC ID and using it to boot APs through IPIs. And obviously I'm setting bit 11 in the IA32_APIC_BASE MSR to enable the LAPIC. Any ideas? Thanks in advance.

  Read the article

• Current wisdom on SQL Server and Hyperthreading?

  - by BradC

  Lots of articles out there (see Slava Oks's original SQL 2000 article and Kevin Kline's SQL 2005 update) recommend disabling hyperthreading on SQL servers, or at least testing your specific workload before enabling it on your servers. This issue is gradually becoming less relevant as true multi-core processors replace hyperthreaded ones, but what's the current wisdom on this issue? Does this advice change any with SQL 2005 64-bit, or SQL 2008, or Windows Server 2008? Ideally, this should be tested in advance in a staging environment, but what about for servers that have already made it into production with HT enabled? How can I tell if performance issues we're experiencing might be related to HT? Is there some specific combination of perfmon counters that might point me in that direction, as opposed to all the other things I normally pursue when working on improving SQL performance? Edit: This is especially attractive because of the potential for an across the board improvement for some of my high-cpu servers, but the client is going to want to see something concrete that helps me identify which servers really could benefit from disabling hyperthreading. Of course, conventional performance troubleshooting is ongoing, but sometimes any little bit helps.

  Read the article

• windows 8.1 does not boot after CHKDSK command

  - by sepehr

  I had problem with Windows 8.1 high Disk usage so in order to solve , searched forums. A voted answer suggested to use CHKDSK command as follow: run command prompt and as administrator type code snippet below: CHKDSK /f /v /b C: (I can not remember accurately) CHKDSK printed : can not run CHKDSK right now , would you like to schedule C drive to be checked next time windows starts? (Y/N) my response was "Y" ,please ! Following this suggestion not only didn't solve my problem as expected but also added another one ! The next time system booted, after windows authentication I just could see a black screen and mouse pointer. So I force shut downed the system and tried to start windows again. This time , windows got stuck in Scanning and Repairing on 22% for around 3 hours so I got tired and forced shut downed again. is CHKDSK source of Scanning and Repairing problem or they are discrete ? is there any hope to overcome this problem without re-installing windows ? can any one else run CHKDSK on newer versions of windows without problem? is CHKDSK effective but inefficient ?(it finally get to end but will take a long time) If yes, how much time does it take? I also have Linux Ubuntu 14.04 installed along side windows.

  Read the article

• CentOS security for lazy admins

  - by Robby75

  I'm running CentOS 5.5 (basic LAMP with Parallels Power Panel and Plesk) and have thus far neglected security (because it's not my full-time job, there is always something more important on my todo-list). My server does not contain any secret data and also no lives depend on it - Basically what I want is to make sure it does not become part of a botnet, that is "good enough" security in my case. Anyway, I don't want to become a full-time paranoid admin (like constantly watching and patching everything because of some obscure problem), I also don't care about most security problems like DOS attacks or problems that only exist when using some arcane settings. I'm in search of a "happy medium", for example a list of known important problems in the default installation of CentOS 5.5 and/or a list of security problems that have actually been exploited - not the typical endless list of buffer overflows that "maybe" a problem in some special case. The problem that I have with the usually recommended approaches (joining mailing lists, etc.) is that the really important problems (something where an exploit exists, that is exploitable in a common setup and where the attacker can do something really useful - i.e. not a DOS) are completely and utterly swamped by millions of tiny security alerts that surely are important for high-security servers, but not for me. Thanks for all suggestions!

  Read the article

• How do you automatically close 3rd party applications when LiberKey is shut down?

  - by NoCatharsis

  Within LiberKey, I have added my own portable applications that are not included within the LiberKey library. When you go into the Properties menu for the app in the LiberKey UI, the Advanced tab has an option for Autoexecute. This dropdown menu seems to have no visible effect, at least on my current installation. I found that I could right click within the primary GUI and select "Add software group", add all 3rd party applications, then go to the Advanced tab within THAT Properties screen and select Autoexecute - "Always on startup". This solved the problem for starting the apps when LiberKey starts. However, now I'm having the same issue when closing out LiberKey. I have created a new 3rd party app that calls the same .exe, but sends the Parameter "/close". I then went to the Advanced tab and selected Autoexecute - "Always on shutdown". Seems pretty logical right? But the apps will not close on LiberKey shutdown. I cannot handle the app close-outs in the same way with a software group, as I did with the startup issue because the Autoexecute drop-down does not have an "Always on shutdown" option. Unfortunately, many of the Q&A forums on liberkey.com are in French and I took Spanish in high school. Otherwise I've not been able to find a workable answer. Any suggestions?

  Read the article

• Eclipse: Slow startup time

  - by ct2k7

  Hello, I've got Eclipse 3.6.1 on my MacBook Air (2010), and I'm getting slowish startup times. Well, slow, compared to my Desktop, which is somewhat less powerful and a few years old). The startup generally takes 15 seconds, and of this, 4 is spent just on the Eclipse splash screen, before Eclipse loads anything. No projects are open at startup. Here's a copy of my eclipse.ini. -startup ../../../plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar --launcher.library ../../../plugins/org.eclipse.equinox.launcher.cocoa.macosx.x86_64_1.1.1.R36x_v20100810 -showsplash org.eclipse.platform --launcher.XXMaxPermSize 512m --launcher.defaultAction openFile -vmargs -Xms256m -Xmx512m -Xdock:icon=../Resources/Eclipse.icns -XstartOnFirstThread -Dorg.eclipse.swt.internal.carbon.smallFonts -Dosgi.requiredJavaVersion=1.6 -Xverify:none -XX:+UseConcMarkSweepGC -XX:+CMSClassUnloadingEnabled -XX:+CMSPermGenSweepingEnabled -XX:+UnlockExperimentalVMOptions -XX:+AggressiveOpts -XX:+StringCache -XX:+UseFastAccessorMethods -XX:+UseLargePages -XX:LargePageSizeInBytes=4m -XX:AllocatePrefetchLines=1 -XX:AllocatePrefetchStyle=1 -Dide.gc=true The problem doesn't seem to be related to plugins - I've disabled the ones which I don't need, and regardless of this configuration or whether all of them are selected on startup, it only takes 1second to load the plugins. I'm running Eclipse 3.6.1 Cocoa x64 build (vanilla) with the Zend Studio plugin. The machine has 4GB RAM, an SSD with over 64% free space, 1.6GHz (4MB L2 Cache). OS is Mac OS X 10.6.6, latest Java available, 1.6. For comparison, my Desktop, an old P4 3GHZ (512K L2 Cache) with a 7200RPM drive, under 40% free space, Eclipse (same config) loads in under 7 seconds, consistently. Note, this one is a Windows machine, with latest Java installed.

  Read the article

• Bare-metal virtualisation for the desktop

  - by Andrew Taylor

  Hi, Does anyone have any knowledge about bare-metal virtualisation products? I'm interested in building a new desktop machine for home, I've been looking at the Intel Quad Core processors and I'd like to put 8GB of RAM in there, but, it got me thinking about making the most out of the available resources. I thought if I could get a good 64bit machine, put some bare-metal virtualisation on, then have a primary system, I'd also be able to bring up some extra virtualised systems as and when I needed. I know most of the bare metal systems are designed for the server market, but, is there anything out there that works well for a desktop. What are the caveats? I presume I won't be able to make the most out of any video cards I could buy, what about just getting a decent screen resolution, will this be a problem? I run a single 24" screen. What about DVD/CD writing, is this possible? I'd like to re-rip my CD collection, I was hoping the quad 64Bit goodness would help me out with the encoding. I currently use a Mac and couldn't go back to windows so that leaves Linux, I was thinking a primary OS of ubuntu. Does this make a difference? Thanks Andrew

  Read the article

• Apache / PHP Begins to Deny SQL Requests after about 2000

  - by Daniel Stern

  We have a web page on our server that we use to run administrative scripts. For example, we might run the script "unenrolStudents()" which runs 5,000 SQL SET commands one after another and sets 5000 student entries in an SQL database to unenrolled. However, we are finding that after running a few thousand queries (it is not totally consistent) we will be "locked out" by our server. SYMPTOMS OF LOCKING OUT: - unable to connect to server with winSCP - opening putty with that connection shows a blank screen (no login / pass) - clearing cookies / cache in chrome does NOT fix locking out - other computers in the office ALSO become locked out - locking out can be triggered with a high frequency of requests (10000 in 1 second) or by less over time (10000 in 500 seconds - this will still cause a lockout even though the frequency is much less) We believe this is a security feature of our own Apache. I know we are using Suhosin but I didn't configure it so I don't know. How can I disable this locking effect so that I can confidently run all my SQL requests and they will go through? Has anyone else dealt with this and found workarounds? Thanks DS

  Read the article

• Firefox is very slow when establish SSL sessions

  - by yanglei

  Using wireshark, I discovered that Firefox v3.0 gets stuck every time before "client key exchange, change cipher spec" stage when establishing a SSL session. Specifically, it takes 0.8~1.8 second before Firefox send "Client Key Exchange" request. This is unacceptable since our application is HTTPS only. I tested this on IE6 and IE8, both works well. Any clues? [Update] Finally, I found the reason of 1 ~ 2 seconds stuck by displaying all captured packets in Wireshark. After the "server hello" stage, Firefox makes a request to ocsp.verisign.com combined with an additional DNS lookup for that domain. Firefox must wait the revocation status from OCSP before entering the next stage of SSL. Depends on whether DNS cache is in effect, this process takes 1 ~ 2 seconds. A interesting observation is that the IP packet contains "client key exchange" has a high possibility to get lost and thus a TCP retransmission is necessary. When this happens, the process can take 3 seconds at worst. I'm not sure if this is a coincidence or a bug. Anyway, here is the result from Wireshark: (delta-time) 0.369296 src-ip dst-ip TCP [ACK] Seq=161 Ack=2741 Win=65340 Len=0 2.538835 src-ip dst-ip TLSv1 Client Key Exchange, Change Cipher Spec, Finished 2.987034 src-ip dst-ip TLSv1 [TCP Retransmission] Client Key Exchange, Change Cipher Spec, Finished The difference between Firefox and IE is this: Firefox 3 enables OCSP checking by default where as IE only supports it. So, there is no problem with both IE6 and IE8. This is indeed a "certificate revoke" problem. Thanks

  Read the article

• HTML tabindex: Put some links last without complete enumeration

  - by Emanuel Berg

  I know I can use the HTML anchor attribute tabindex to set the tabindex of links, i.e., in what order they get focused when the user hits Tab (or Shift-Tab). But, I have a home page with tons of links, and to enumerate all those is a lot of work. The actual case is, I have four image links that by default gets index 1, 2, 3, and 4 (well, the behavior is equivalent, at least). But, I'd much rather have the first non-image link as number 1. Check it out here and you'll understand immediately. I tried to give the first non-image link (the link I desire to have tabindex 1) - I tried to give it tabindex 1 explicitly, hoping that it would cascade from there, but it didn't (i.e., the first image link got implicit tabindex 2). I also tried to give the image links ridiculously high tabindexes, but that didn't work: as the other links didn't have tabindexes at all, those highs were still "first". As a last resort (the solution currently employed) I gave the image links all tabindex -1. That makes for logical tabbing, but, it is suboptimal, as those image links are excluded from the tab loop - a user tabbing away will probably never realize that the images are clickable. I'd like them to be reachable with tabbing, but last, after all the ordinary links. If you wonder why I'm so determined to achieve this, it has to do with my own finger habits: I almost exclusively search for links, tab back, tab forth, etc., and very seldom using the mouse. Note: I'll accept a script to change the actual HTML for a complete enumeration, if you convince me there is no "set" way to solve this problem.

  Read the article

• apache with php fastcgi keeps going down

  - by Josh Nankin

  I have an apache2 server configured with MPM worker and php fast cgi. Lately the apache logs have been telling me that MaxClients is being reached frequently, even though it's already pretty high. My server is now constantly going down, and I see a bunch of lines like this in the log: [Sun Mar 06 04:25:40 2011] [error] [client 50.16.83.115] FastCGI: comm with (dynamic) server "/var/local/fcgi/php-cgi-wrapper.fcgi" aborted: (first read) idle timeout (20 sec) [Sun Mar 06 04:25:40 2011] [error] [client 50.16.83.115] FastCGI: incomplete headers (0 bytes) received from server "/var/local/fcgi/php-cgi-wrapper.fcgi" I can see that my php-cgi processes are pretty large (about 70mb on average). Here's my apache configuration for MPM worker: KeepAlive ON KeepAliveTimeout 2 <IfModule mpm_worker_module> StartServers 5 MinSpareThreads 10 MaxSpareThreads 10 ThreadLimit 64 ThreadsPerChild 10 MaxClients 20 MaxRequestsPerChild 2000 </IfModule> Heres my fastcgi apache configuration: <IfModule mod_fastcgi.c> # One shared PHP-managed fastcgi for all sites Alias /fcgi /var/local/fcgi # IMPORTANT: without this we get more than one instance # of our wrapper, which itself spawns 20 PHP processes, so # that would be Bad (tm) FastCgiConfig -idle-timeout 20 -maxClassProcesses 1 <Directory /var/local/fcgi> # Use the + so we don't clobber other options that # may be needed. You might want FollowSymLinks here Options +ExecCGI </Directory> AddType application/x-httpd-php5 .php AddHandler fastcgi-script .fcgi Action application/x-httpd-php5 /fcgi/php-cgi-wrapper.fcgi </IfModule> Here's my fastcgi wrapper: #!/bin/sh PHPRC="/etc/php5/apache2" export PHPRC PHP_FCGI_CHILDREN=8 export PHP_FCGI_CHILDREN exec /usr/bin/php-cgi Any help would be very very much appreciated!

  Read the article

• A tiered approach to cloning linux partitons

  - by Djurdjura

  I'm looking at a strategy for cloning Linux (root) partitions without having to use a Live CD. Literature suggests rightly that the source and target partitions must be umounted to be able to get a clean clone. This assumes that you need to use a LiveCD. I was wondering if instead of requiring a LiveCD, if using a 3rd partition that would emulate the LiveCD functionality, if we can't achieve the same functionality. In other words, at a high level a system with 3 partitions (all bootable): Rescue Partition (LiveCD emulation) Running Partition (Source) Backup Partition (Destination) All 3 partitions are LVMS. When it's time to clone the source partition to the backup (destination) partition, we would boot to the rescue partition, unmount the other 2 partitions (is it required?), run disk check on the source, copy to the destination (dd or simple copy to avoid replicating the defragmentation from the source), run disk check on the destination partition, update Grub menu list to force boot from either partition, and reboot into that partition. My question, is it an approach that you'd recommend? MBR in all this? Any gotchas or extra checks required? Thanks, D. PS. On recommendation from members, posting here instead of stackoverflow.com.

  Read the article

• Page pool memory

  - by legiwei

  I'm currently using Windows XP SP3 32 bit, using C2D E6320 with 2GB RAM. When I am playing Starcraft 2, I encounter an error where it says my system is running low on page pool memory. Starcraft graphic settings suggested a high settings for me. I do not think it has to do with my GC but with my RAM. I then made a search to try to rectify the problem. Apparently, it's something to do with my virtual memory. I then proceed to try to the suggested solution which is to temper the registry and limit the page pool memory to 384MB. However, having done so, I still could not achieved it. I've seen screenshot settings of windows XP with 2GB having 384MB of page pool memory. My default settings puts it at 195MB whereas when I try to increase the pool limit, it can only go to a max of 229MB. I tried increasing my RAM capacity to 3GB but the pool limit still remains. I like to know how to increase my page pool memory. I've tried searching for solution but to no avail other than the one that I've mentioned above (which didn't solve my problem completely).

  Read the article

• graphics performance better on battery?

  - by Scott Beeson

  Anyone have any idea why my laptop would perform (considerably) better while on battery than while plugged in? It's a Dell Latitude E6420 with Windows 8 Pro. I tried mirroring all the settings in the selected power plan from "On battery" to "Plugged In" and that didn't help. I then just restored the defaults for all power plans (balanced and high performance). I'm still seeing the same results. The best example where it is most noticeable (don't laugh) is Sim City Social in Chrome. I'm probably seeing a performance increase of 5x on battery versus plugged in. This is easily reproducible too. I'm very confused. Could it be caused by dust? The laptop isn't that old and there is no visible dust. I'm not going to take it apart to check the insides as it's a corporate laptop. Could it be overheating? Battery Sim City Social: 68 degrees max Civ V: 77 degrees max Charger Sim City Social: 68 Civ V: did not test See answer below... I'm retarded

  Read the article

• What could be causing SVCHost to leak handles?

  - by Goz

  I have a problem that has been causing me all sorts of grief recently. SVCHost appears to be leaking resources all over the shop. This is the SVCHost run with the arguments "-k netsvcs". At the moment it is sitting at around 5,700 Handles being used. Before I rebooted the machine it was sitting at around 33,000 handles! This higher number has been causing me large problems as my software, thus, fails to obtain the handles it needs (The software tries to create around 2000 handles). I'm totally at a loss as to what is going wrong. IF anyone could help me stop this happening it would be much appreciated. I'm running on XP with SP3. Edit: I tracked this problem down to the WMI system. I'm not sure why or how the problem was occurring. Basically I used "sc change" to move it into its own process and suddenly everything seems to be fine. I'm not entirely sure what is going on ...

  Read the article

• Office 365 - Outlook shows Global Address List clicking "Rooms" during a meeting request

  - by TheCleaner

  This appears to be a "known" issue, but apparently no fix for it. However, I've been impressed before at the tenacity of the experts here to figure out an answer/fix. ISSUE When booking a New Meeting in Outlook (2013 or 2010) and choosing the Rooms button: The default list that opens is the Offline Global Address List: Which means a user has to change from the Offline Global Address List to the All Rooms list as shown here in order to easily pick from the list of actual rooms/resources: This isn't the default however for On-Premise Exchange servers. They default "correctly" to the All Rooms list when you click the Rooms button in the meeting request. While the option of using the Room Finder is there and does work, users have to know to click the Room Finder choice and it doesn't fix the actual root issue here. MY RESEARCH A few links I've found: http://community.office365.com/en-us/forums/158/t/41013.aspx http://community.office365.com/en-us/forums/148/p/24139/113954.aspx http://community.office365.com/en-us/forums/172/t/58824.aspx It was suggested that it might be that the "msExchResourceAddressLists attribute has incorrect value set". I checked my config by running: Get-OrganizationConfig | Select-Object ResourceAddressLists and the output was what it should be: ResourceAddressLists -------------------- {\All Rooms} QUESTION Does anyone have a fix that will make the All Rooms list be the default list when clicking the Rooms button in Outlook when using Office 365 / Exchange Online?

  Read the article

• FreeBSD slow transfers - RFC 1323 scaling issue?

  - by Trey

  I think I may be having an issue with window scaling (RFC 1323) and am hoping that someone can enlighten me on what's going on. Server: FreeBSD 9, apache22, serving a static 100MB zip file. 192.168.18.30 Client: Mac OS X 10.6, Firefox 192.168.17.47 Network: Only a switch between them - the subnet is 192.168.16/22 (In this test, I also have dummynet filtering simulating an 80ms ping time on all IP traffic. I've seen nearly identical traces with a "real" setup, with real internet traffic/latency also) Questions: Does this look normal? Is packet #2 specifying a window size of 65535 and a scale of 512? Is packet #5 then shrinking the window size so it can use the 512 scale and still keep the overall calculated window size near 64K? Why is the window scale so high? Here are the first 6 packets from wireshark. For packets 5 and 6 I've included the details showing the window size and scaling factor being used for the data transfer. Code: No. Time Source Destination Protocol Length Info 108 6.699922 192.168.17.47 192.168.18.30 TCP 78 49190 http [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=8 TSval=945617489 TSecr=0 SACK_PERM=1 115 6.781971 192.168.18.30 192.168.17.47 TCP 74 http 49190 [SYN, ACK] Seq=0 Ack=1 Win=65535 Len=0 MSS=1460 WS=512 SACK_PERM=1 TSval=2617517338 TSecr=945617489 116 6.782218 192.168.17.47 192.168.18.30 TCP 66 49190 http [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSval=945617490 TSecr=2617517338 117 6.782220 192.168.17.47 192.168.18.30 HTTP 490 GET /utils/speedtest/large.file.zip HTTP/1.1 118 6.867070 192.168.18.30 192.168.17.47 TCP 375 [TCP segment of a reassembled PDU] Details: Transmission Control Protocol, Src Port: http (80), Dst Port: 49190 (49190), Seq: 1, Ack: 425, Len: 309 Source port: http (80) Destination port: 49190 (49190) [Stream index: 4] Sequence number: 1 (relative sequence number) [Next sequence number: 310 (relative sequence number)] Acknowledgement number: 425 (relative ack number) Header length: 32 bytes Flags: 0x018 (PSH, ACK) Window size value: 130 [Calculated window size: 66560] [Window size scaling factor: 512] Checksum: 0xd182 [validation disabled] Options: (12 bytes) No-Operation (NOP) No-Operation (NOP) Timestamps: TSval 2617517423, TSecr 945617490 [SEQ/ACK analysis] TCP segment data (309 bytes) Note: originally posted http://forums.freebsd.org/showthread.php?t=32552

  Read the article

• SQL Server 2005 standard filegroups / files for performance on SAN

  - by Blootac

  Ok so I've just been on a SQL Server course and we discussed the usage scenarios of multiple filegroups and files when in use over local RAID and local disks but we didn't touch SAN scenarios so my question is as follows; I currently have a 250 gig database running on SQL Server 2005 where some tables have a huge number of writes and others are fairly static. The database and all objects reside in a single file group with a single data file. The log file is also on the same volume. My interpretation is that separate data files should be used across different disks to lessen disk contention and that file groups should be used for partitioning of data. However, with a SAN you obviously don't really have the same issue of disk contention that you do with a small RAID setup (or at least we don't at the moment), and standard edition doesn't support partitioning. So in order to improve parallelism what should I do? My understanding of various Microsoft publications is that if I increase the number of data files, separate threads can act across each file separately. Which leads me to the question how many files should I have. One per core? Should I be putting tables and indexes with high levels of activity in separate file groups, each with the same number of data files as we have cores? Thank you

  Read the article

• Compiling Gearman PHP Library for CentOS 5.8

  - by Andrew Ellis

  I've been trying to get Gearman compiled on CentOS 5.8 all afternoon. Unfortunately I am restricted to this version of CentOS by my CTO and how he has our entire network configured. I think it's simply because we don't have enough resources to upgrade our network... But anyways, the problem at hand. I have searched through Server Fault, Stack Overflow, Google, and am unable to locate a working solution. What I have below is stuff I have pieced together from my searching. Searches have told said to install the following via yum: yum -y install --enablerepo=remi boost141-devel libgearman-devel e2fsprogs-devel e2fsprogs gcc44 gcc-c++ To get the Boost headers working correctly I did this: cp -f /usr/lib/boost141/* /usr/lib/ cp -f /usr/lib64/boost141/* /usr/lib64/ rm -f /usr/include/boost ln -s /usr/include/boost141/boost /usr/include/boost With all of the dependancies installed and paths setup I then download and compile gearmand-1.1.2 just fine. wget -O /tmp/gearmand-1.1.2.tar.gz https://launchpad.net/gearmand/1.2/1.1.2/+download/gearmand-1.1.2.tar.gz cd /tmp && tar zxvf gearmand-1.1.2.tar.gz ./configure && make -j8 && make install That works correctly. So now I need to install the Gearman library for PHP. I have attempted through PECL and downloading the source directly, both result in the same error: checking whether to enable gearman support... yes, shared not found configure: error: Please install libgearman What I don't understand is I installed the libgearman-devel package which also installed the core libgearman. The installation installs libgearman-devel-0.14-3.el5.x86_64, libgearman-devel-0.14-3.el5.i386, libgearman-0.14-3.el5.x86_64, and libgearman-0.14-3.el5.i386. Is it possible the package version is lower than what is required? I'm still poking around with this, but figured I'd throw this up to see if anyone has a solution while I continue to research a fix. Thanks!

  Read the article

• What's the state of the art in image upscaling?

  - by monov

  I like to collect cool pics and use them as wallpapers or for other things. Often, artists publish only low-res versions, probably for fear of theft. Example: Gabriel Pulecio's BIRDS Now, if I want to use that as a wallpaper, I'd have to upscale it, and obviously that'd make it look blurry because of the bicubic interpolation. I realize there's no real way to get a high-res version from a low-res pic, because the information is not simply there. That said, I'm wondering if heuristics have been developed for upscaling with less apparent loss of quality. Those would probably be optimized for specific image types. For photorealistic pictures, for cartoons with large flat areas, for pixel art... One algorithm I'm aware of is Seam Carving. It works for some kinds of pics, especially ones with a plain, undetailed or uninteresting background, and a subject that strongly stands out. But it's far from being general-purpose. Applying it to the above pic produces this. It looks quite sharp, but the proportions are horribly distorted because the algorithm is not designed for this kind of pic. Another is Pixel art scaling algorithms. Those are completely unfit for anything other than actual pixel art that's pixelized to begin with. For example, I tried the scale2x windows binary on my pic, but its output was nearly indistinguishable from nearest-neighbour scaling because the algorithm didn't detect any isolated pixely fragments to work from. Something else I tried was: I enlarged the image in Photoshop with bicubic interpolation, then I applied unsharp mask. The result looks pretty bad. The red blotch is actually resized reasonably well, but the dove is far from it. What I'm looking for is some app that makes a best-effort attempt at upscaling any input image while minimizing blurriness. If you know of any, I'll be thankful. Note that the subjective prettiness and sharpness of the result is what matters... the result doesn't need to be completely faithful to the original small image.

  Read the article

• X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

  - by Marcelo Santos

  After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

  Read the article

< Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528  | Next Page >