Search Results

Search found 19793 results on 792 pages for 'media library'.

Page 521/792 | < Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528  | Next Page >

  • Audio Static/Interference regardless of audio interface?

    - by Tom
    I currently am running a media center/server on a Lubuntu machine. The machine specs: Core 2 Duo Extreme EVGA SLI 680i MotherBoard 2 GB DDR2 Ram 3 Hard Drives no raid - WD Caviar Black, Green, and Samsung Spinpoint Galaxy GTX 220 1GB External USB Creative XI-FI Extreme Card 550W Power Supply This machine is hooked up through an optical cable to an ONKYO HTR340 Receiver through the XIFI card. Whenever I play any audio regardless if it is through XBMC, the default audio player, a flash video, etc, I get a horrible static sound that randomly gets louder. Here is a video of the sound: http://www.youtube.com/watch?v=SqKQkxYRVA4 This static comes in randomly, sometimes going away for short periods, but eventually always comes back. So far I have tried everything I could think of: Reinstalling OS Installing/upgrading/repairing PulseAudio/Alsa Installing alternate OSes, straight Ubuntu, Lubuntu, Xubuntu, Arch, Mint, Windows 7 Switching audio from the external card to internal Optical, audio out through HDMI, audio out through headphones Different ports on receiver (my main desktop sounds fine on the same sound system) Different optical cables Unplugging everything unnecessary from the motherboard (1 HD, 1 Stick of Ram, 1 Keyboard) Swapping out ram Swapping out the motherboard Replacing the Graphics Card (was replaced due to fan being noisy, not specifically for this problem) Different harddrives Swapping power supply Disabling onboard audio Pretty much everything short of swapping the CPU. I haven't been able to narrow down the problem and it is getting frustrating. Is it possible that the CPU is faulty and might cause a problem such as this, or that the PC case is shorting out the motherboard? Any kind of suggestions will be appreciated.

    Read the article

  • Problem: Munin Graph

    - by Pablo
    I've been trying to install Munin for 15 days, I looked for information, analized logs, I even deleted and reinstalled Munin using YUM. I'm hosted at Media Temple on a VPS with CentOS. The problem is still there and It's driving me nuts. Graphics are shown as following: http://imageshack.us/photo/my-images/833/capturadepantalla201106u.png/ This is the configuration of my munin.conf file dbdir /var/lib/munin htmldir /var/www/munin logdir /var/log/munin rundir /var/run/munin [localhost] address **.**.***.*** #IP VPS This is the configuration of my munin-node.conf file log_level 4 log_file /var/log/munin/munin-node.log port 4949 pid_file /var/run/munin/munin-node.pid background 1 setseid 1 # Which port to bind to; host * user root group root setsid yes # Regexps for files to ignore ignore_file ~$ ignore_file \.bak$ ignore_file %$ ignore_file \.dpkg-(tmp|new|old|dist)$ ignore_file \.rpm(save|new)$ allow ^127\.0\.0\.1$ Thanks so much, I appreciate all the answers UPDATE munin-graph.log Jun 22 16:30:02 - Starting munin-graph Jun 22 16:30:02 - Processing domain: localhost Jun 22 16:30:02 - Graphed service : open_inodes (0.14 sec * 4) Jun 22 16:30:02 - Graphed service : sendmail_mailtraffic (0.10 sec * 4) Jun 22 16:30:02 - Graphed service : apache_processes (0.12 sec * 4) Jun 22 16:30:02 - Graphed service : entropy (0.10 sec * 4) Jun 22 16:30:02 - Graphed service : sendmail_mailstats (0.14 sec * 4) Jun 22 16:30:02 - Graphed service : processes (0.14 sec * 4) Jun 22 16:30:03 - Graphed service : apache_accesses (0.27 sec * 4) Jun 22 16:30:03 - Graphed service : apache_volume (0.15 sec * 4) Jun 22 16:30:03 - Graphed service : df (0.21 sec * 4) Jun 22 16:30:03 - Graphed service : netstat (0.19 sec * 4) Jun 22 16:30:03 - Graphed service : interrupts (0.14 sec * 4) Jun 22 16:30:03 - Graphed service : swap (0.14 sec * 4) Jun 22 16:30:04 - Graphed service : load (0.11 sec * 4) Jun 22 16:30:04 - Graphed service : sendmail_mailqueue (0.13 sec * 4) Jun 22 16:30:04 - Graphed service : cpu (0.21 sec * 4) Jun 22 16:30:04 - Graphed service : df_inode (0.16 sec * 4) Jun 22 16:30:04 - Graphed service : open_files (0.16 sec * 4) Jun 22 16:30:04 - Graphed service : forks (0.13 sec * 4) Jun 22 16:30:05 - Graphed service : memory (0.26 sec * 4) Jun 22 16:30:05 - Graphed service : nfs_client (0.36 sec * 4) Jun 22 16:30:05 - Graphed service : vmstat (0.10 sec * 4) Jun 22 16:30:05 - Processed node: localhost (3.45 sec) Jun 22 16:30:05 - Processed domain: localhost (3.45 sec) Jun 22 16:30:05 - Munin-graph finished (3.46 sec)

    Read the article

  • svchost consuming more than 50% CPU all the time in windows 7

    - by claws
    Hello, I'm using windows 7 ultimate. svchost containing DCOM Server Process Launcher Plug and Play Power services is consuming more than 50% of CPU for most of the time. I found this blog post: http://blog.hansmelis.be/2007/06/17/windows-vista-long-delay-when-switching-songs-in-media-player/ That process is associated with two services: DCOM Server Process Launcher and Plug and Play. For the Vulcans among us, all logic stops there for a second. What do those two services have to do with WMP? The answer is provided by Vista's new audio engine. The new engine supports several audio "enhancements". But for the enhancements to work, the engine needs to determine if your hardware is up to the task. And when does it check that? Each time a sound output device is accessed. That's pretty nice if you can do a hot swap of sound hardware, but I don't see me doing that anytime soon. Anyways, it does provide us with the link to the correct service because checking hardware is done by the "Plug and Play" service. One might think that deactivating each enhancement would solve the problem, but that's wishful thinking. The configuration of the enhancements is located in the properties of the sound hardware. When opening the tab, I found out that no enhancements were active. Hmmm... so why does it check the hardware? Well, it does that in case you actually enable an enhancement. To completely stop the hardware checking, you have to tick the box labelled Disable all enhancements. As soon as you do that, Vista finally understands you don't want to use them buts thats for vista. Is it the same case with windows 7 too? and I couldn't find any "Disable all enhancements" in my controlpanelsounds (mmsys.cpl). Where can I find this option in windows 7? How to solve this?

    Read the article

  • Static IP for dynamic IP

    - by scape279
    I have a dynamic IP address. I would like to have a static IP, but Virgin Media don't allow static IPs for residential broadband services, even if you ask them really nicely and offer to pay for it without switching to a business tariff. I am already registered with a dynamic DNS service which is updated by my router eg me.example.com will always resolve to my dynamic IP. This is fine for some circumstances, but not if you can only enter an IP address into configuration files/hardware etc like firewalls, subversion services etc etc. Is there a way I can have a static IP address 'forwarding' to my dynamic IP? Would a possible solution involve tunnelling? Setting up a private proxy? Please note the following: I am able to buy an IP address from my web host. I have access to a webserver and I am able to create custom DNS zones. I'm happy to have a webserver running at home if necessary also. I do not wish to change broadband providers. I have zero control over the services that require the IP address entering so I cannot tackle the problem that way round (services I need to access are at work). PS I've tried googling this issue, but it is very difficult to search for as most results are related to dynamic dns (which I already have set up and isnt quite what I'm after)

    Read the article

  • windows 8.1 upgrade fails with error code 0xc1900101-0x20017

    - by cmorse
    I just tried to install windows 8.1 on my laptop, but it fails to install with the message: Sorry we couldn't complete the update to Windows 8.1. We restored your previous version of Windows to this PC 0xC1900101 - 0x20017 It looks like on the first boot that the laptop is going to the PC restore screen (it asks what kind of keyboard I have, and then what repair optins I would like to take). Thus far I have just been selecting "Continue to windows 8." I'm running a Lenovo x220i tablet. I've got 43GB of free disk space. It installed just fine on my desktop. The primary difference between the two machines is that the desktop has media center install, and isn't using TrueCrypt. Full WindowsUpdate.log http://pastebin.com/hGmAW4Q1 Most important portion of WindowsUpdate.log: 2013-10-17 10:41:06:671 964 694 Agent ************* 2013-10-17 10:41:06:671 964 694 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2013-10-17 10:41:06:671 964 694 Agent ********* 2013-10-17 10:41:06:671 964 694 Agent * Online = No; Ignore download priority = No 2013-10-17 10:41:06:671 964 694 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2013-10-17 10:41:06:671 964 694 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service 2013-10-17 10:41:06:671 964 694 Agent * Search Scope = {Machine & All Users} 2013-10-17 10:41:06:671 964 694 Agent * Caller SID for Applicability: S-1-5-18 2013-10-17 10:41:07:233 964 870 Report REPORT EVENT: {AD47FBDC-F7F9-4E7F-BAF4-DBA3784C7101} 2013-10-17 10:41:06:436-0600 1 202 [AU_REBOOT_COMPLETED] 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed. 2013-10-17 10:41:07:233 964 870 Report REPORT EVENT: {8D4E7A67-9526-4702-A897-5BE5F97497AF} 2013-10-17 10:41:06:639-0600 1 204 [AGENT_INSTALLING_FAILED_POST_REBOOT] 101 {8951E70D-4332-4F7C-B92D-D9362E384959} 1 c1900101 WSAcquisition Failure Content Install Installation Failure Post Reboot. 2013-10-17 10:41:07:249 964 870 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8 2013-10-17 10:41:07:249 964 870 Report WER Report sent: 7.8.9200.16715 0xc1900101(0x20017) 8951E70D-4332-4F7C-B92D-D9362E384959 Install 101 Unmanaged 2013-10-17 10:41:07:249 964 870 Report CWERReporter finishing event handling. (00000000)

    Read the article

  • CORS Fails on CloudFront Distribution with Nginx Origin

    - by kgrote
    I have a CloudFront distribution set up with an Nginx server as the origin (a Media Temple DV server, to be specific). I enabled the Access-Control-Allow-Origin: * header so fonts will work in Firefox. However, Firefox throws a CORS error for fonts loaded from this CloudFront/Nginx distribution. I created another CloudFront distribution, this time with an Apache server as the origin, and set Access-Control-Allow-Origin: * also. Firefox displays fonts from this origin without issue. I've set up a demo page here: http://kristengrote.com/cors-test/ When I perform a curl request for the same font file from each distribution, both files return almost exactly the same headers: Apache Origin Nginx Origin ——————————————————— ——————————————————— HTTP/1.1 200 OK HTTP/1.1 200 OK Server: Apache Server: nginx Content-Type: application/font-woff Content-Type: application/font-woff Content-Length: 25428 Content-Length: 25428 Connection: keep-alive Connection: keep-alive Date: Wed, 11 Jun 2014 23:23:09 GMT Date: Wed, 11 Jun 2014 23:15:23 GMT Last-Modified: Tue, 10 Jun 2014 22:15:56 GMT Last-Modified: Tue, 10 Jun 2014 22:56:09 GMT Accept-Ranges: bytes Accept-Ranges: bytes Cache-Control: max-age=2592000 Cache-Control: max-age=2592000 Expires: Fri, 11 Jul 2014 23:23:09 GMT Expires: Fri, 11 Jul 2014 23:15:23 GMT Access-Control-Allow-Origin: * Access-Control-Allow-Origin: * Access-Control-Allow-Methods: GET, HEAD Access-Control-Allow-Methods: GET, HEAD Access-Control-Allow-Headers: * Access-Control-Allow-Headers: * Access-Control-Max-Age: 3000 Access-Control-Max-Age: 3000 X-Cache: Hit from cloudfront X-Cache: Hit from cloudfront Via: 1.1 210111ffb8239a13be669aa7c59f53bd.cloudfront.net (CloudFront) Via: 1.1 fa0dd57deefe7337151830e7e9660414.cloudfront.net (CloudFront) X-Amz-Cf-Id: QWucpBoZnS3B8E1mlXR2V5V-SVUoITCeVb64fETuAgNuGuTLnbzAhw== X-Amz-Cf-Id: E2Z3VOIfR5QPcYN1osOgvk0HyBwc3PxrFBBHYdA65ZntXDe-srzgUQ== Age: 487 X-Accel-Version: 0.01 X-Powered-By: PleskLin X-Robots-Tag: noindex, nofollow So the only conclusion I can draw is that something about Nginx is preventing Firefox from recognizing CORS and allowing the fonts via CloudFront. Any ideas on what the heck is happening here?

    Read the article

  • Imagemagick PDF to JPG conversion failing

    - by Scott
    I'm trying to convert the first page of a PDF to a JPG. I'm pretty sure I got this to work with certain PDFs, but is it really possible that certain PDFs are made incorrectly and cannot be converted? I tried running this first: $ convert 10-03-26.pdf[1] test.jpg And I got the follow: Error: /syntaxerror in readxref Operand stack: Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- Dictionary stack: --dict:1062/1417(ro)(G)-- --dict:0/20(G)-- --dict:73/200(L)-- --dict:73/200(L)-- --dict:97/127(ro)(G)-- --dict:229/230(ro)(G)-- --dict:14/15(L)-- Current allocation mode is local ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1 convert: Postscript delegate failed `10-03-26.pdf'. Running this instead: $ convert -verbose -colorspace rgb '10-03-26.pdf[1]' test.jpg I get the following: Error: /syntaxerror in readxref Operand stack: Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- Dictionary stack: --dict:1062/1417(ro)(G)-- --dict:0/20(G)-- --dict:73/200(L)-- --dict:73/200(L)-- --dict:97/127(ro)(G)-- --dict:229/230(ro)(G)-- --dict:14/15(L)-- Current allocation mode is local ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1 "gs" -q -dBATCH -dSAFER -dMaxBitmap=500000000 -dNOPAUSE -dAlignToPixels=0 "-sDEVICE=pnmraw" -dTextAlphaBits=4 -dGraphicsAlphaBits=4 "-g792x1611" "-r72x72" -dFirstPage=2 -dLastPage=2 "-sOutputFile=/tmp/magick-XXU3T44P" "-f/tmp/magick-XXoMKL8Z" "-f/tmp/magic2eec1F"Start of Image Define Huffman Table 0x00 0 1 5 1 1 1 1 1 1 0 0 0 0 0 0 0 Define Huffman Table 0x01 0 3 1 1 1 1 1 1 1 1 1 0 0 0 0 0 Define Huffman Table 0x10 0 2 1 3 3 2 4 3 5 5 4 4 0 0 1 125 Define Huffman Table 0x11 0 2 1 2 4 4 3 4 7 5 4 4 0 1 2 119 End Of Image convert: Postscript delegate failed `10-03-26.pdf'. Why would the conversion fail? Just as an aside, this is happening on a (gs) Grid-Service on (mt) Media Temple hosting. I cannot install programs on the server, but both Imagemagick and Ghostscript are installed Thanks!

    Read the article

  • File upload permissions issue on Windows Server 2008 R2 IIS 7.5 PHP 5.3 with Drupal v.7.26

    - by Taras
    I have website on Drupal version: 7.26 OS on server is Windows Server 2008 R2 Web server $_SERVER["SERVER_SOFTWARE"]: Microsoft-IIS/7.5 Server API: CGI/FastCGI Core PHP Version: 5.3.28 file_uploads: On post_max_size: 75M upload_max_filesize: 50M upload_tmp_dir: C:\inetpub\wwwroot\tmp memory_limit: 128M open_basedir: C:\inetpub\wwwroot;C:\inetpub\wwwroot\tmp When I go to /admin/config/media/file-system I see error messages: The directory sites\default\files exists but is not writable and could not be made writable. The directory tmp exists but is not writable and could not be made writable. Public file system path: sites\default\files Temporary directory: tmp I have set permissions on folders C:\inetpub\wwwroot\tmp : IIS_IUSRS : Full control C:\inetpub\wwwroot\sites\default\files : IIS_IUSRS : Full control I am working as Administrator user: C:\Users\Administrator\Downloadsecho %username% Administrator I can`t change Read Only Attributes for these folders. Every time I do this change and press Apply button and Apply changes to this folder, subfolders and files is checked and press OK button it displays Applying attributes... dialog when it finishing I press OK button on folder properties dialog closing it. When I open Properties dialog once again I see Read-only is checked again. How can I fix it?

    Read the article

  • Install MatroskaProp on Windows 7 x64

    - by Neophytos
    To see more information in Windows Explorer property pages and menus about Matroska Video (.mkv) files, similar to what one can see when selecting native Windows media (.avi, .asf, .wmv or even just plain old mpg) files, Matroska links (from http://www.matroska.org/downloads/windows.html) to a download of the MatroskaProp shell extension (http://www.jory.info/serendipity/archives/14-MatroskaProp-2.8-Released.html). It used to work for me under Windows XP 32-bit. Now I have Windows 7 x64, and downloaded, installed and ran it. Configuration and settings page is fine. But it does not seem to actually register any shell extension. Nothing is added to Explorer windows, menus or property pages when selecting .mkv or .mks files). I tried calling the register hook manually using regsvr32.dll, that again invoked the configuration window and let me set all options, and when confirming even said the registration succeeded, but seems to have had no effect. In the registry I cannot find any traces of the shell extension being installed. Can this extension be made to work under Windows 7 or x64 systems? Are there known problems with installing this or other old shell extensions on x64, or on Windows 7?

    Read the article

  • Errors when attempting to update source files, Server 2012R2 (errors 80073701 and 14081)

    - by jeremy
    I have a Windows Server 2012R2 machine that I installed with Server Core, and then decided that I wanted to switch to GUI. I'll make the long story short: I ran windows updates, and now the source files are older/out of sync with the operating system, and I need to update the source files. Here are a couple of articles that outline how this is supposed to work: http://blog.coretech.dk/kaj/why-i-cant-convert-my-windows-server-2012-r2-core-to-gui/ http://blogs.technet.com/b/joscon/archive/2012/11/14/how-to-update-local-source-media-to-add-roles-and-features.aspx I have followed these instructions, but the updates are not successfully updating the source. I get errors like: "An error occurred - Package_for_KB29671203 Error: 0x80073701, Error: 14081, The referenced assembly could not be found." or "add-windowspackage failed. error code = 0x80073701, add-windowspackage: the referenced assembly could not be found" I've extensively searched for help on those error codes related to Server 2012 and windows updates, but my google-fu is failing me. I am using windows update packages found in c:\Windows\SoftwareDistribution\Download How can I get these updates to bring my source files up to current? Thanks!

    Read the article

  • How can I switch an existing set of Subversion repositories to use ActiveDirectory?

    - by jpierson
    I have a set of private Subversion repositories on a Windows Server 2003 box which developers access via SVNServe over the svn:// protocol. Currently we have been using the authz and passwd files for each repository to control access however with the growing number of repositories and developers I'm considering switching to using their credentials from ActiveDirectory. We run in an all Microsoft shop and use IIS instead of Apache on all of our web servers so I would prefer to continue to use SVNServe if possible. Besides it being possible, I'm also concerned about how to migrate our repositories so that the history for the existing users map to the correct ActiveDirectory accounts. Keep in mind also that I'm not the network administrator and I'm not terrible familiar with ActiveDirectory so I'll probably have to go through some other people to get the changes made in ActiveDirectory if necessary. What are my options? UPDATE 1: It appears from the SVN documentation that by using SASL I should be able to get SVNServe to authenticate using ActiveDirectory. To clarify, the answer that I'm looking for is how to go about configuring SVNServe (if possible) to use ActiveDirectory for authentication and then how to modify an existing repository to remap existing svn users to their ActiveDirectory domain login accounts. UPDATE 2: It appears that the SASL support in SVNServe works off of a plugin model and the documentation only shows as an example. Looking at the Cyrus SASL Library it looks like a number of authentication "mechanisms" are supported but I'm not sure which one is to be used for ActiveDirectory support nor can I find any documentation about such matters. UPDATE 3: Ok, well it looks like in order to communication with ActiveDirectory I'm looking to use saslauthd instead of sasldb for the *auxprop_plugin* property. Unfortunately it appears that according to some posts (possibly outdated and inaccurate) saslauthd does not build on Windows and such endeavors are considered a work in progress. UPDATE 4: The lastest post I've found on this topic makes it sound as though the proper binaries () are available through the MIT Kerberos Library but it sounds like the author of this post on Nabble.com is still having issues getting things working. UPDATE 5: It looks like from the TortoiseSVN discussions and also this post on svn.haxx.se that even if saslgssapi.dll or whatever necessary binaries are available and configured on the Windows server that the clients will also need the same customization in order to work with these repositories. If this is true, we will only be able to get ActiveDirectory support from a windows client only if changes are made in these clients such as TortoiseSVN and CollabNet build of the client binaries to support such authentication schemes. Although thats what these posts suggest, this is contradictory from what I originally assumed from other reading in that being SASL compatible should require no changes on the client but instead only that the server be setup to handle the authentication mechanism. After reading a bit more carefully in the document about Cyrus SASL in Subversion section 5 states "1.5+ clients with Cyrus SASL support will be able to authenticate against 1.5+ servers with SASL enabled, provided at least one of the mechanisms supported by the server is also supported by the client." So clearly GSSAPI support (which I understand is required for Active Directory) must be available within the client and the server. I have to say, I'm learning way too much about the internals of how Subversion handles authentication than I ever wanted to and I juts simply want to get an answer about whether I can have Active Directory authentication support when using SVNServe on a Windows server and accessing this from Windows clients. According to the official documentation it seems that this is possible however you can see that the configuration is not trivial if even possible at all.

    Read the article

  • unreadable corrupted ntfs partition - lost clusters reported

    - by Eduardo Martinez
    partition magic is reporting multiple 'bad file record signature' and 'lost clusters' errors on my 250GB samsung sata disk (connected via usb on a xp sp3). Unfortunately PM is unable to fix. PM shows the drive as being NTFS, detects used space ok and also drive name. But PM browser (right click on partition, browse...) won't show anything (as if disk was empty) Windows Explorer is not even picking the drive name and reports 'the file or directory is corrupted and unreadable' PTDD partition table doctor demo tells me the boot sector is fine, and I can see all disk content on its browser - but crucially cannot copy that content over to a new disk (PTDD browser is pretty arid to say the least) Also tried - photorec-6.11.3 - it actually started to extract files but wouldn't keep file names or any folder structure (maybe I missed sth on the configuration options) - find and mount - intellectual scan went well, the only partition on the disk was detected, then tried to mount into p: but got this error on windows explorer: 'p:\ is not accesible. The media is write protected'. Find and mount allows you to create an image from partition but I don't have a disk big enough at hand. Does anyone know if this will keep the extracted files/folders structure intact? I'm starting to think the disk is pretty screwed and my chances to recover this data are slim. Please someone enlighten me with that marvellous piece of software I am missing :-) Thanks in advance

    Read the article

  • Windows 7 install detects SSD but doesn't list it to install to

    - by Mohamed Meligy
    I'm having quite a weird problem when trying to install Windows 7 SP1 on a new Corsair Force Series 3 SSD to replace a failing HDD in my wife's laptop. When I boot to Windows install, it shows that I have no disks to install to, and tells me to find it a driver to any custom disks I may have. When I go to repair option on the first install window, and then open command prompt Window, I can see the disk using diskpart, and can partition it and format partitions, and then later access them from command prompt and copy files to them. After creating partitions, clicking the "browse" button in Windows install screen that shows no disks available to install Windows to, does show the partitions created by diskpart! So, it does detect the disk and partitions, but refuses to list them as options to install to. People on the Interwebs seem to suggest that just running diskpart "clean" solved the issue for most people, just creating an "active" "primary" partition is al most tutorials suggest. Both got me only as far as described above. The BIOS doesn't have RAID option, changing between "ATA" and "AHCI" (the only available options) didn't make any difference. Might be worth mentioning that this is on a laptop that has Sata III controller for main drive (which I connected the Sata3 SSD to), and Sata II for DVD (which I used for Windows install media). That's what googling brings at least (DELL XPS 15 L502). Any ideas? . Update: The SSD is 460 GB. I tried setting it all as one partition and creating 70-90 GB partition as well (NTFS). More importantly, Windows doesn't list the partition as one it cannot install to (which it does with disks in general when they are small for example). What happens here is different. It doesn't list anything at all. It shows empty list of drives.

    Read the article

  • GRUB doesn't recognize partitions on one harddisk

    - by knizz
    I have a dualboot computer with Windows Vista (on hd0) and Ubuntu 9.10. The bootloader is GRUB and the windows bootloader lets me decide between Vista and Ubuntu-Installation (broken WuBi). But now (i don't know why that changed) I can't use start the windows-bootloader anymore. I tried "ls" on the grub-prompt and it gave me a list like: (hd0) (hd1) (hd1,0) (hd1,1) (hd1,2) ... (fd0) It recognizes all partitions of hd1 (the ubuntu-harddisk) but not of hd0(the win-disk). .. WHY? Here is the result of the "boot info script" for the technical details: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=a7c510e3-2399-437b-ab92-fa609e48d63f)/boot/grub. => No boot loader is installed in the MBR of /dev/sdb sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows Vista Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe /wubildr.mbr /wubildr sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb1: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unbekannter Dateisystemtyp „“ sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: Bios Boot Partition Boot sector type: - Boot sector info: sdb4: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 9.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Platte /dev/sda: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x52554d66 Partition Boot Start End Size Id System /dev/sda1 * 2,048 307,202,047 307,200,000 7 HPFS/NTFS /dev/sda2 307,202,048 1,250,258,943 943,056,896 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Platte /dev/sdb: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x00000000 Partition Boot Start End Size Id System /dev/sdb1 1 1,250,263,727 1,250,263,727 ee GPT GUID Partition Table detected. Partition Start End Size System /dev/sdb1 34 262,177 262,144 Microsoft Windows /dev/sdb2 262,178 1,131,253,933 1,130,991,756 Linux or Data /dev/sdb3 1,131,253,934 1,131,255,887 1,954 Bios Boot Partition /dev/sdb4 1,131,255,888 1,245,312,528 114,056,641 Linux or Data /dev/sdb5 1,245,312,529 1,250,263,694 4,951,166 Linux Swap blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 AE1440441440122F ntfs /dev/sda2 3AE66E4DE66E0A09 ntfs data /dev/sdb2 5419D16119DAA4DE ntfs LaufwerkD /dev/sdb4 a7c510e3-2399-437b-ab92-fa609e48d63f ext4 /dev/sdb5 60a0143a-e01b-450a-bbd1-f22059e47b65 swap ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb4 / ext4 (rw,errors=remount-ro) =========================== sdb4/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s /boot/grub/grubenv ]; then have_grubenv=true load_env fi set default="0" if [ ${prev_saved_entry} ]; then saved_entry=${prev_saved_entry} save_env saved_entry prev_saved_entry= save_env prev_saved_entry fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/white ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry "Ubuntu, Linux 2.6.31-20-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-20-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-14-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-14-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows Vista (loader) (on /dev/sda1)" { insmod ntfs set root=(hd0,1) search --no-floppy --fs-uuid --set ae1440441440122f chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### =============================== sdb4/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # / was on /dev/sdb4 during installation UUID=a7c510e3-2399-437b-ab92-fa609e48d63f / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb5 during installation UUID=60a0143a-e01b-450a-bbd1-f22059e47b65 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 =================== sdb4: Location of files loaded by Grub: =================== 583.8GB: boot/grub/core.img 583.8GB: boot/grub/grub.cfg 579.7GB: boot/initrd.img-2.6.31-14-generic 580.0GB: boot/initrd.img-2.6.31-20-generic 579.7GB: boot/vmlinuz-2.6.31-14-generic 579.8GB: boot/vmlinuz-2.6.31-20-generic 580.0GB: initrd.img 579.7GB: initrd.img.old 579.8GB: vmlinuz 579.7GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sdb1 00000000 54 34 dc 3b 8b ff 6c fa 3e 59 3d 24 25 af 5f 9b |T4.;..l.>Y=$%._.| 00000010 72 f8 36 3d 56 30 22 fd c6 08 5e 39 7f dc 29 48 |r.6=V0"...^9..)H| 00000020 48 e5 24 52 77 b0 fc 64 b6 ce 48 c3 07 ce b5 81 |H.$Rw..d..H.....| 00000030 06 68 60 4f 6e fb 83 92 df 3a 54 b9 df 21 2a cd |.h`On....:T..!*.| 00000040 1e 2f e2 49 fe cf 81 2d 52 17 1a 4e 66 b4 f3 f0 |./.I...-R..Nf...| 00000050 41 25 e3 96 26 28 fe 19 61 72 75 f8 40 a3 b7 ef |A%..&(..aru.@...| 00000060 5f 79 dc cb 28 44 44 7c 9b 9a 7b 6c 4b 4b 60 0f |_y..(DD|..{lKK`.| 00000070 a9 97 87 bc 85 9f db bb d2 1a 88 9f aa 49 18 d5 |.............I..| 00000080 92 2d db 7e fe f7 8d 7a 18 c0 33 c5 bd 7a 46 07 |.-.~...z..3..zF.| 00000090 c8 27 13 66 94 49 62 9f bc 99 56 55 25 fb 94 a9 |.'.f.Ib...VU%...| 000000a0 3f b2 a7 0a 87 d0 a4 4e 51 f1 09 02 c4 29 eb ff |?......NQ....)..| 000000b0 26 3b 51 3e 5a 0c db ee a6 57 a7 c3 ba a1 74 90 |&;Q>Z....W....t.| 000000c0 ee 70 08 18 cc b8 d0 22 ce 96 c7 cb 68 40 98 20 |.p....."....h@. | 000000d0 49 3d 07 ec df d1 8d cf 19 bc 42 90 70 24 01 b4 |I=........B.p$..| 000000e0 28 cf c6 50 d3 95 5a 1b 18 15 33 c7 b2 a8 95 92 |(..P..Z...3.....| 000000f0 bb 93 fe 18 2b 81 c1 6b 9c 30 f1 65 50 6a 80 3d |....+..k.0.ePj.=| 00000100 74 37 a8 59 a6 51 8a 63 b6 d8 16 9f a9 47 2a 7c |t7.Y.Q.c.....G*|| 00000110 04 a7 fe 69 47 02 bf e9 b7 1b 7a ea 60 5c 3c 53 |...iG.....z.`\<S| 00000120 5b 10 78 dc 4d d2 a8 22 30 45 37 fb 56 06 9f 06 |[.x.M.."0E7.V...| 00000130 aa df cf 87 3a 3e cf 72 f2 e5 a6 c6 aa e2 7c 1c |....:>.r......|.| 00000140 64 c2 fc 80 ce 02 fc 7f 0f c6 60 81 bf cd 3b 5a |d.........`...;Z| 00000150 37 a5 38 1b 0c 1b 39 2e d6 f6 3d a2 36 e5 87 c3 |7.8...9...=.6...| 00000160 17 b5 fd ee 33 c7 ce a3 d9 c2 57 dc ee 85 48 9d |....3.....W...H.| 00000170 33 60 02 cd c5 83 44 44 ea b6 07 25 0a 4b a6 6e |3`....DD...%.K.n| 00000180 fc 51 42 cd 84 0b 65 b6 19 a1 e5 b2 eb 14 0c fa |.QB...e.........| 00000190 24 77 f5 44 6e 5d 39 dd b6 8e cc f8 30 fe 21 46 |$w.Dn]9.....0.!F| 000001a0 9c ff 95 c6 c7 b5 0a df 54 ca d2 ac bc 64 d0 97 |........T....d..| 000001b0 94 54 d9 29 0f 91 60 20 c3 e4 53 c2 b0 e4 40 72 |.T.)..` ..S...@r| 000001c0 7e 25 bc 81 06 ad 05 46 14 a7 e6 71 6b 5c db 9c |~%.....F...qk\..| 000001d0 0a 5e 76 23 ae 06 01 36 98 21 65 2c 90 e7 4b 1a |.^v#...6.!e,..K.| 000001e0 2a 2d 80 a5 48 db 9e 14 e0 9f e9 aa 00 e3 77 32 |*-..H.........w2| 000001f0 0f fd 94 db 55 a6 64 46 be ae ca de da ee 89 68 |....U.dF.......h| 00000200 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde

    Read the article

  • Tomcat running, catalina throwing exception

    - by Mark Steudel
    So I have to preface that I'm not familiar with tomcat/catalina, but trying to troubleshoot this anyway. Anyway I see in /var/log/tomcat5/catalina.out I'm seeing these errors: Using CATALINA_BASE: /usr/share/tomcat5 Using CATALINA_HOME: /usr/share/tomcat5 Using CATALINA_TMPDIR: /usr/share/tomcat5/temp Using JRE_HOME: java.lang.ClassNotFoundException: org.apache.catalina.startup.Catalina at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.apache.catalina.startup.Bootstrap.init(Bootstrap.java:223) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:410) I'm not really sure what this means. This installation was working a week ago ... did something get corrupted? How would I figure if it did ... what other information would be valuable here? Tomcat seems to be running and starting up fine ... UPDATE: this might be related: Jun 19, 2011 11:00:25 PM org.apache.coyote.http11.Http11BaseProtocol pause INFO: Pausing Coyote HTTP/1.1 on http-9080 Jun 19, 2011 11:00:26 PM org.apache.catalina.core.StandardService stop INFO: Stopping service Catalina log4j:ERROR LogMananger.repositorySelector was null likely due to error in class reloading, using NOPLoggerRepository. Some more stuff in the logs: 2011-06-12 23:04:45,223 INFO [main] [com.atlassian.confluence.lifecycle] contextInitialized Starting Confluence 3.1.1 (build #1724) 2011-06-12 23:04:45,663 INFO [main] [beans.factory.xml.XmlBeanDefinitionReader] loadBeanDefinitions Loading XML bean definitions from c lass path resource [bootstrapContext.xml] 2011-06-12 23:04:46,134 INFO [main] [beans.factory.xml.XmlBeanDefinitionReader] loadBeanDefinitions Loading XML bean definitions from c lass path resource [setupContext.xml] 2011-06-12 23:04:46,236 INFO [main] [beans.factory.xml.XmlBeanDefinitionReader] loadBeanDefinitions Loading XML bean definitions from c lass path resource [bootstrapCacheContext.xml] 2011-06-12 23:04:47,571 INFO [main] [atlassian.plugin.manager.DefaultPluginManager] init Initialising the plugin system 2011-06-12 23:04:48,338 INFO [main] [atlassian.plugin.manager.DefaultPluginManager] init Plugin system started in 0:00:00.748 Jun 12, 2011 11:05:05 PM org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:525) at java.net.Socket.connect(Socket.java:475) at java.net.Socket.<init>(Socket.java:372) at java.net.Socket.<init>(Socket.java:186) at org.apache.catalina.startup.Catalina.stopServer(Catalina.java:395) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.stopServer(Bootstrap.java:344) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:435) Jun 12, 2011 11:05:44 PM org.apache.catalina.core.AprLifecycleListener lifecycleEvent INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.pa th: /usr/java/jdk1.6.0_18/jre/lib/i386/client:/usr/java/jdk1.6.0_18/jre/lib/i386:/usr/java/jdk1.6.0_18/jre/../lib/i386:/usr/java/packag es/lib/i386:/lib:/usr/lib CLEAN LOG OUTPUT FROM STARTING TOMCAT: Using CATALINA_BASE: /usr/share/tomcat5 Using CATALINA_HOME: /usr/share/tomcat5 Using CATALINA_TMPDIR: /usr/share/tomcat5/temp Using JRE_HOME: java.lang.ClassNotFoundException: org.apache.catalina.startup.Catalina at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.apache.catalina.startup.Bootstrap.init(Bootstrap.java:223) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:410) So I did a /etc/rc.d/init.d/tomcat status and I get this: [wqadm1n@ip-72-167-51-178 proc]$ sudo /etc/rc.d/init.d/tomcat5 status /etc/rc.d/init.d/tomcat5 is stopped [wqadm1n@ip-72-167-51-178 proc]$ sudo /etc/rc.d/init.d/tomcat5 start Starting tomcat5: [ OK ] [wqadm1n@ip-72-167-51-178 proc]$ sudo /etc/rc.d/init.d/tomcat5 status lock file found but no process running for pid 30774

    Read the article

  • ISCSI Target Ubuntu

    - by erai
    I'm trying to setup iscsitarget on Ubuntu 12.04 but I can't connect to it. On the windows machine it says Target Error. with no other output. My ietd.conf is Target iqn.2012-06.com.org:virtual_machines.lun Lun 0 Type=fileio,Path=/media/volume0/storlun0.bin When I run iscsiadm -m discovery -t st -p localhost The output is iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 closed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: connection login retries (reopen_max) 5 exceeded iscsiadm: Could not perform SendTargets discovery. dmesg output: [ 3324.804665] iscsi_trgt: Removing all connections, sessions and targets [ 3325.875343] iSCSI Enterprise Target Software - version 1.4.20.3 [ 3325.875415] iscsi_trgt: Registered io type fileio [ 3325.875420] iscsi_trgt: Registered io type blockio [ 3325.875425] iscsi_trgt: Registered io type nullio

    Read the article

  • Viewing a large-resolution VNC server through a small-resolution viewer in Ubuntu

    - by Madiyaan Damha
    I have two Ubuntu computers, one with a large screen resolution (1920x1600) that is running default ubuntu vnc server. I have another computer that has a resolution of about 1200x1024 that I use to vnc into the server (I use the default ubuntu vnc viewer). Now everything works fine except there are annoying scrollbars in the viewer because the server's desktop resolution is so much higher than the viewer's. Is there a way to: 1) Scale the server's desktop down to the viewer's resolution. I know there will be a loss of image quality, but I am willing to try it out. This should be something like how windows media player or vlc scales down the window (and does some interpolation of pixels). 2) Automatically shrink the resolution of the server to the client's when I connect and scale the resolution back when I disconnect. This seems like a less attractive solution. 3) Any other solution that gurus out there use? I am sure someone has experienced this before (annoying scroll bars) so there must be a solution out there. Thanks,

    Read the article

  • Looking for updated BIOS for '99 Gateway in order to format/recognize >127 GB HD

    - by Jeff
    I have a '99 Gateway that's apparently too old for even Gateway to acknowledge it exists. Want to use it as a media hub and put in a 320GB HD, but it will not format above 127GB even running Win XP SP3. Read somewhere that upgrading the BIOS may do the trick, but I can't find the correct BIOS, and GW has been no help. Hoping I can just upgrade the BIOS, which is 11 years old. Any help would be much appreciated! I don't know where to look, and searches have been fruitless. System info: OS Name Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 3 Build 2600 OS Manufacturer Microsoft Corporation System Name xxxx System Manufacturer Gateway System Model TABOR_II System Type X86-based PC Processor x86 Family 6 Model 7 Stepping 3 GenuineIntel ~596 Mhz BIOS Version/Date Intel Corp. 4W4SB0X0.15A.0015.P10, 9/28/1999 SMBIOS Version 2.1 BIOS info (from a free app I located): BIOS Type: Phoenix BIOS Date: September 28th 1999 BIOS ID: 4W4SB0X0.15A.0015.P10.9909281445-None BIOS OEM: 4W4SB0X0.15A.0015.P10 Chipset: Intel 440BX/ZX rev 3 SuperIO: SMC 70x or 80x rev 0 at port 0370 Manufacturer: Gateway Motherboard: WS440BX

    Read the article

  • Inexpensive, simple screen recording application for mac

    - by donut
    I am more and more consistently running into the need to create screencasts (record my screen) for clients to show them how to use programs or websites. Up until now I've been using Jing and it's been wonderful. But I would like something that can give me something less annoying than a .swf. A .mov or, best of all, something that plays without fuss on Mac and Windows. Also, the 5-minute limit is annoying, but not show stopping. Basically, I'd like to be able to actually give them the file on a CD or something instead of relying on whatever host I use staying up for eternity. To sum up, here's what I require: Record a portion or all of the screen. Records audio from mic while recording screen. Exports files easily playable on Mac and Windows (requiring Quicktime is okay, but not ideal) Will work on Mac OS 10.5+ Allows recording videos of at least 5 minutes. Text in recorded videos is easily readable when exported. Bonuses points for: Records videos greater than 5 minutes Exported videos will work in Windows Media player without any fuss. I haven't upgraded to Snow Leopard yet but I know it has some screen recording stuff built in but I don't know if it would be sufficient or not. The reason I say, "simple" is because most of the applications I've seen do much more than I need (I mean, Jing is nearly perfect for my needs) and cost more than I would like to spend.

    Read the article

  • Start Menu Shortcuts resisting reorganisation

    - by seusr
    Running Win7. The Start Menu was getting too big, so I've navigated to C:\ProgramData\Microsoft\Windows\Start Menu\Programs and created some sub-folders in various categories [image editors, system utilities, media players, security for example] in which to group the shortcuts. Having created the group folders, I've dragged and dropped the Start Menu shortcuts into them. However it seems all Start Menu shortcuts are not alike. Some programs, their shortcut folders having been moved from the Start Menu, spawn NEW [but empty] folders bearing their company names in the top level of the Start Menu eg AVICodec Some programs don't have Start Menu shortcut folders that can be seen in WinExplorer [or equiv] at all, even though they turn up under the Start Menu itself. It seems these can be moved where they are visible i.e. in the Start - All Programs by dragging and dropping not just onto the desired folder but by hovering to expand the desired folder and then dropping between other shortcuts there. Eg Daum, Format Factory That's not such a problem, but why it's happening is a mystery. What's going on, and how to make these shortcuts behave normally or otherwise control them properly?

    Read the article

  • Ripping a home video VCD on Linux or Windows with VLC or otherwise

    - by user259774
    I have a VCD with 22 minutes of video on it. I would like to retain this footage and throw away the VCD. I can play the whole thing with VLC ("open disc - vcd - /dev/sr0 - play"): all 22 minutes of the main track. I don't believe there's any other content aside from the main track. I can seek to anywhere I want to within the 22 minute track. If I mount /dev/sr0 /media/vcd and then try to copy the only file from the MPEGAV folder, I get an I/O error, with an empty destination file. VLC has a "convert" option in addition to "play". When I use this I actually get a good OGG file back, after it runs through the video in painful real-time. I guess it dubs it frame-by-frame. But the file is only 10 minutes long, leaving 12 minutes off of the track. Handbrake doesn't detect it's track titles, unfortunately. I don't know if I should start getting involved with GNU ddrescue or if it's because VCDs somehow encode their data sectors differently. Anyway, I'm in way over my head and if anyone knows how I could get that video track off the thing, feel free to share! Edit: I should note that I also have access to a Windows computer

    Read the article

  • TLS (STARTTLS) Failure After 10.6 Upgrade to Open Directory Master

    - by Thomas Kishel
    Hello, Environment: Mac OS X 10.6.3 install/import of a MacOS X 10.5.8 Open Directory Master server. After that upgrade, LDAP+TLS fails on our MacOS X 10.5, 10.6, CentOS, Debian, and FreeBSD clients (Apache2 and PAM). Testing using ldapsearch: ldapsearch -ZZ -H ldap://gnome.darkhorse.com -v -x -b "dc=darkhorse,dc=com" '(uid=donaldr)' uid ... fails with: ldap_start_tls: Protocol error (2) Testing adding "-d 9" fails with: res_errno: 2, res_error: <unsupported extended operation>, res_matched: <> Testing without requiring STARTTLS or with LDAPS: ldapsearch -H ldap://gnome.darkhorse.com -v -x -b "dc=darkhorse,dc=com" '(uid=donaldr)' uid ldapsearch -H ldaps://gnome.darkhorse.com -v -x -b "dc=darkhorse,dc=com" '(uid=donaldr)' uid ... succeeds with: # donaldr, users, darkhorse.com dn: uid=donaldr,cn=users,dc=darkhorse,dc=com uid: donaldr # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 result: 0 Success (We are specifying "TLS_REQCERT never" in /etc/openldap/ldap.conf) Testing with openssl: openssl s_client -connect gnome.darkhorse.com:636 -showcerts -state ... succeeds: CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:SSLv2/v3 write client hello A SSL_connect:SSLv3 read server hello A depth=1 /C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department verify error:num=19:self signed certificate in certificate chain verify return:0 SSL_connect:SSLv3 read server certificate A SSL_connect:SSLv3 read server done A SSL_connect:SSLv3 write client key exchange A SSL_connect:SSLv3 write change cipher spec A SSL_connect:SSLv3 write finished A SSL_connect:SSLv3 flush data SSL_connect:SSLv3 read finished A --- Certificate chain 0 s:/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=MIS/CN=gnome.darkhorse.com i:/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department 1 s:/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department i:/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department --- Server certificate -----BEGIN CERTIFICATE----- <deleted for brevity> -----END CERTIFICATE----- subject=/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=MIS/CN=gnome.darkhorse.com issuer=/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department --- No client certificate CA names sent --- SSL handshake has read 2640 bytes and written 325 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: D3F9536D3C64BAAB9424193F81F09D5C53B7D8E7CB5A9000C58E43285D983851 Session-ID-ctx: Master-Key: E224CC065924DDA6FABB89DBCC3E6BF89BEF6C0BD6E5D0B3C79E7DE927D6E97BF12219053BA2BB5B96EA2F6A44E934D3 Key-Arg : None Start Time: 1271202435 Timeout : 300 (sec) Verify return code: 0 (ok) So we believe that the slapd daemon is reading our certificate and writing it to LDAP clients. Apple Server Admin adds ProgramArguments ("-h ldaps:///") to /System/Library/LaunchDaemons/org.openldap.slapd.plist and TLSCertificateFile, TLSCertificateKeyFile, TLSCACertificateFile, and TLSCertificatePassphraseTool to /etc/openldap/slapd_macosxserver.conf when enabling SSL in the LDAP section of the Open Directory service. While that appears enough for LDAPS, it appears that this is not enough for TLS. Comparing our 10.6 and 10.5 slapd.conf and slapd_macosxserver.conf configuration files yields no clues. Replacing our certificate (generated with a self-signed ca) with an Apple Server Admin generated self signed certificate results in no change in ldapsearch results. Setting -d to 256 in /System/Library/LaunchDaemons/org.openldap.slapd.plist logs: 4/13/10 5:23:35 PM org.openldap.slapd[82162] conn=384 op=0 EXT oid=1.3.6.1.4.1.1466.20037 4/13/10 5:23:35 PM org.openldap.slapd[82162] conn=384 op=0 do_extended: unsupported operation "1.3.6.1.4.1.1466.20037" 4/13/10 5:23:35 PM org.openldap.slapd[82162] conn=384 op=0 RESULT tag=120 err=2 text=unsupported extended operation Any debugging advice much appreciated. -- Tom Kishel

    Read the article

  • Flash plugin locks up Firefox, Chrome and Safari behind a corporate proxy, IE6 works fine

    - by Shevek
    At work I am forced by corporate policy to use IE6. Obviously this is not so good so I use FF for most of my browsing. However there is a problem once I have installed the Flash plug-in - FF locks up when trying to load Flash media. Looking at the status bar at the time of the lock up it appears this happens when the browser tries to get cross domain data. The Flash Active X plug-in in IE does not suffer this issue. I have tried it in a brand new profile in FF with Flash as the only plug in and it locks up. We have 2 different proxy servers and both exhibit the same problem. I have also tried Chrome and Safari and both lock up with the plug-in installed. So, has anyone else had this problem and solved it? Or, is there any way to disable cross domain data access in the flash plug-in? Or, is there any way to disable the "This site needs an additional plug-in" ribbon which appears when the plug-in is not installed. Many thanks!

    Read the article

  • Qmail Patching Makes me Nervous

    - by JM4
    We have a system running CentOS 5 with Plesk 8.6 and Qmail running. Our primary domain is hosted through Media Temple. When Plesk and Qmail are hosted on a single Dedicated Virtual server, it reads the primary server IP and domain and reports that when sending emails from the system. Our pages are written in PHP so we are using the mail() function. While our email goes out to everybody, several enterprise email domains reject our email because it shows a different originating IP (our primary server IP and domain) than the domain we list in the 'from' address. This is not modifiable. Every domain we own of course does have its own IP as well underneath our primary server IP. I have seen several places online that provide a patch, specifically - which allows Domain Binding: "DomainBindings -- For servers that host multiple domains or have multiple IP addresses assigned to them, it is sometimes useful (or important) to have qmail use a specific IP address for its outgoing mail. By default, qmail uses whatever address the OS chooses for all outbound connections. With this patch, you can specify which address to use. It uses a control file similar to smtproutes to specify the outbound IP address to use, based on the sender's domain (local copy) (pyropus.ca)" Qmail Link First off I do not have netqmail installed so I'll need to find another source, but also I am completely unfamiliar with applying patches to qmail. Will I lose email services if I patch? Is it a simple apply and use process? Will my existing email accounts and data be restored after the patch? I am very, very new to unix/linux so this does make me a bit nervous but I am the only person who can make the change and it is one our company "HAS" to have. Any ideas?

    Read the article

  • Unable to boot with Windows 2008 DVD / USB Key

    - by r0ca
    Hi everyone, I am trying to install Windows 2008 server on a HP Proliant DL180 G5. There is no built-in DVD reader so I need to use my LaCie USB one. When I put the CD in and boot from the USB DVD on the server, I get the error message: Boot Failed! Please insert boot media in selected boot device. So I tried with another Windows bootable CD and still no luck. What I've done then, I copied the installation DVD on my 16go USB key. Again, impossible to boot from the USB Key. I have 2 147go SAS 15k HDD on my server. They are not showing in the Bios. I was wondering if this is a reason why nothing will boot on it. I am trying to find a way to deploy Windows 2008 server on my HP server as soon as possible. If you guys have ideas, feel free to let me know :) Best regards, David. System Information: HP Proliant DL180 G5 Quad-Core 2.5 4GO Ram 2x 147GO SAS 15k P.S. This is my first installation ever on SAS/SCSI HDD. Thanks a bunch! Edit: Well, my bad! I purchased a new USB DVD and now I can install Windows 2008 server. Thanks a bunch for your help!

    Read the article

< Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528  | Next Page >