Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 523/1834 | < Previous Page | 519 520 521 522 523 524 525 526 527 528 529 530  | Next Page >

• Gigabit connection between 2 computers

  - by Alecu

  I am trying to set up a connection between 2 pc's. It's a direct cable connection. The problem that I am having is that the connection isn't gigabit. I know both network cards support gigabit. I checked in the device settings and in one pc I can see in the Speed & Duplex the 1Gbps option but on the other pc I can't see that option despite the fact that the network card is gigabit. I have quite some files to copy from one pc onto another and I really need a good connection between them. I can't really remove the hard drive because it would void the warranty. Could this be a driver issue or a cable issue? On both pc's I have windows 8. The network card on the pc that doesn't have the 1 gbps option is an Atheros ar8161 card.

  Read the article

• Drives will not show up on PCI RAID card in Ubuntu 12.04 LTS

  - by Mechh69

  Computer specs Intel E8200 Dual Core MSI G45M MB Ultra U12-40739 PCI Expansion Card - 2 SATA Internal Ports, 1.5Gbps, RAID 0, 1, JBOD 6 GB DDR2 Q1. I installed Ubuntu 12.04 LTS and Amahi, for using Grey Hole, last night. The two disc on the raid card do not show up under Ubuntu 12.04LTS but they do show up under grey hole so I know the drives and the raid card are working and there. I need to access them in Ubuntu to format them and place folders on them but I can not see them or figure out how to access them. Q2. Only 4 of the six drives connected to the MB are showing in Ubuntu, but they show as active in grey hole. I also need to access these drives in Ubuntu as this is my storage server. I am new to LINUX so any help you can provide with simple directions will be greatly appreciated . Thank you Mechh69

  Read the article

• mysql questions for beginners

  - by ankhseeker

  ok, I have a few questions regarding mysql. I am currently running ubuntu 12.04.4 LTS command line version. I am looking for a database that I can use. I am confused at this point because I am uninformed. mysql is just one database that is on the server? or can it contain several or many databases What programs do I use to access it on the server or is it a vt-100 type access? I understand that mysql comes with lamp? or ubuntu. I am thinking that it is already installed but not sure how to access it, but that is another question for later. Outside of the man pages and the ubuntu manual, is there a site for its setup and use? Thanks!

  Read the article

• How to control routes added by RasDial

  - by Robert Dodier

  I am using the RasDial function on a Windows box (Windows Server 2008) to dial a device from which the server then reads data. It seems that some new routes are added to the network routing table when the dial-up connection is made. That interferes with other network interfaces on the server. In particular, RasDial adds a default route which routes traffic to the device, which makes the server unreachable until the connection is dropped. Is there a way to control which routes are added by RasDial? I have been studying Microsoft's document for RasDial and associated items (RASDIALPARAMS, RASDIALEXTENSIONS) without finding anything about routing. There is an option for "Use default gateway on remote network" when configuring a VPN, but I don't see how to apply that in this case. Thanks for any light you can shed on this problem.

  Read the article

• Interconnection between 2 computers in different networks.

  - by cripox

  Hi, What I want is to connect 2 computers (work and personal) primary for using a software KVM (Input Director or Synergy). Transferring files between them would be a plus. The main issue is that the work computer is in a secured enterprise network, and my personal computer is using a 3G+ modem for Internet access. On the work computer I do not have Internet access (only local network). I want to somehow connect them without to mess up either networks. I want my personal computer to not be seen in the work network. Is it possible? Suggestions: - use a simple UTP cable to connect the 2 computers with each other. Can they each be in both 2 networks without issues? - use some kind of usb cable, if exists

  Read the article

• Making application listen to port

  - by dplanet

  I am running an Ubuntu guest machine through my Windows 7 host machine (with Virtualbox), and on the Ubuntu system running an application that uses port 6969. Through configuring the Virtualbox port forwarding settings I have made it possible that I can go to 127.0.0.1:6969 in my browser and see the application's default page. However, I'm wondering how I can port forward from my Windows 7 machine to the whole network. My local network (IPv4) address is 192.168.0.5. I want to be able to go to 192.168.0.5:6969 from any computer on the network and see the application. I've searched Google but can only seem to find solutions in Linux, not Windows. How can I do this?

  Read the article

• AR9485 wireless card loses ability to connect after hibernation

  - by DrewDiezel

  This has happened twice now, the first time it happened I just reinstalled Ubuntu. The only things that I've been messing with in terms of networking, have been restarting the network-manager service after I resume from hibernate (because it never works right after resume, but restarting the service fixes that), and changing my mac address with ifconfig wlan0 down && ifconfig wlan0 hw ether 11:22:33:44:55 && ifconfig wlan0 up. using tail | dmesg returns a bunch of attempts to connect, saying something like authenticating ... okay you're connected! now I'm going to just disconnect because I feel like it. (reason=3). Any ideas? If it helps maybe I'll add a picture of the tail|dmesg output later. My wireless drivers are as follows: Atheros AR9485 Wireless Network Adapter Hamachi Network Interface Microsoft Virtual Wifi Miniport Adapter Realtek PCIe GBE Family Controller VirtualBox Host-Only Ethernet Adapter Here is a pastebin of some terminal outputs that could help. Also, the reddit thread has a few answers, for anyone curious. It's located here. It is entirely possible that it's just my school wifi blocking out my laptop, and my home wifi sucks. Wifi does work at places other than my home and school, however my phone can connect to both places. Here is a pastebin of the results of the wireless-info script.

  Read the article

• Print to UNC Path Permissions

  - by awilinsk

  I am running Windows Server 2008 (not R2) for a print server and I have a program that needs to write to the UNC path of the network printer. I have found that anyone in the Print Operators group is able to write to the UNC path of the network printer, but standard users are not. I have tried adding the same permissions as the Print Operators group to a user, but when I try to write to the UNC path, I get Access Denied. I cannot add users to the Print Operators group because it gives too many permissions. What permissions do I need to set to allow standard users to print to the UNC path of a network printer?

  Read the article

• Joomla: How can I prevent certain user from visiting a certain page?

  - by user6657

  I have an internal section in my Joomla only for "Registered" users. There they can edit preferences. Multiple users can access the same preferences (different stakeholders). Now I have "smithcorp" and "smithcorp_guest". They should both be able to view the same things, but "smithcorp_guest" shouldn't be able to edit the preferences. Is there a way to forbid "smithcorp_guest" access to this page? I have only seen access regulation via the user level, i.e. unregistered, registered, admin.

  Read the article

• Can't connect to Wireless

  - by SimplyRed37

  Good day all! I hope you are doing good. I have performed a WUBI installation of 12.04 on my HP G62 laptop, which has an Atheros AR9285 wireless chipset. Everything works fine with my wired network connection. However, wireless is unable to connect to my wifi network. I enter the WPA2 key and then it attemps to connect, but eventually comes back, asking for the WPA2 key again, as if it was not good. All of the other laptops in the household are able to connect, using the same key (I configured them all, so I am 500% sure of the WPA2 key). Any idea as to what could be causing this? I can definitely post the output of CLI commands like "rfkill list" or "sudo lshw -class network", or "ifconfig". I have installed Ubuntu a few time but I am definitely still a newbie, but I am definitely computer savyy. Looking forward to suggestions . Thanks in advance !!! Dan...

  Read the article

• Best way to simulate virtual networks

  - by user179529

  I'm wanting to have a vitual test network on either hyper-v or ESXI ( I Don't care which one) I want to have a multi network virtual environment. Lets say three networks: 192.168.1.0, 192.168.2.0 and 192.168.3.0. I want to use the networks to simulate a multi domain or multi site domain. Whats the best way of doing this. I have VMware workstation but it won't create more then one NAT virtual network. So how would I go about doing this in either Hyper-v 2012 or ESXI?

  Read the article

• Can I wake up PC/laptop on remote printing request?

  - by dzieciou

  I have an old Epson printer that does not have network adapter, only a USB socket. I have also a computer with network card. I could combine them to put this printer in my local network, but then I would need to keep the computer always up and running. That's definitely not economic. Is there a way to wake up computer when printing request arrives? Something like Wake-on-LAN? Or I am forced to use additional hardware?

  Read the article

• Windows?????(C#?Visual Basic?Active Server Pages?Visual C++)??Oracle Database?????

  - by Yusuke.Yamamoto

  C#?Visual Basic?Active Server Pages?Visual C++???????? Windows ???????????????Oracle Database ????·???????????????? ???? Windows ?????????????Oracle Database ??????????·????·???????????? .NET Oracle Data Provider for .NET Oracle Provider for OLE DB ???? OLE DB.NET Oracle ODBC Driver ???? ODBC.NET Visual Basic/ASP/Access Oracle Objects for OLE(OO4O) Oracle ODBC Driver Oracle Provider for OLE DB OO4O?OLE DB?ODBC?ODP.NET ??Oracle Data Access Component(ODAC) ???????????? OTN Oracle Data Access Components ??????? ???? ????????Oracle DB????????????? Oracle on Windows / .NET ?? ?????????? .NET|???????????

  Read the article

• ??????(??????????)

  - by ???02

  ??????(??????????)??????????????????????????????????????????????????????????????????????????????????·??????????????????????????????????????Web?????·???????????????????????????????????????????????????????????????????·???????????????????????????????????????????????????????????????????????????????? Oracle Adaptive Access Manager????·????????????????????? Oracle Identity Federation????????????????Oracle Entitlements Server ????????????·??????????????????????????? -????·?????-?????????????Oracle Adaptive Access Manager -- ??????????????????????????????Oracle Adaptive Access Manager???????????????????????????????????????????????????????·???????????????????????????????????????????????(????)?????????????????????????????ID???????????????????????????????????(1)???????????????????????????????????????????·?????(2)????????????????????????????????????????????????????????????(3)??????????????????Web??????????(????)?????????????(4)?????????????????????????????????Web?????????????????????????????????????Oracle Identity Federation -- ?????????????Oracle Identity Federation???????????????????????????????????·????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????IT??????????????????(1)????????:??????????????????????·???????????????????????????:SAML?ID-FF?WS-Federation?Windows CardSpace(2)??????????????????????????????????????·???????????????????Oracle Entitlements Server -- ????????????Oracle Entitlements Server????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????UI??????????????????????????????????????????????????????(1)OASIS XACML????????????????????(2)??????????????????????????????????????????????????(3)???????????????????????????????????????(4)????????????????????????????????????????Oracle OpenSSO Security Token Service -- ?????????????????Oracle OpenSSO Security Token Service(OpenSSO STS)????????????????Web ???????????????????????????(????????????)????????????????OASIS WS-Trust ????????????????????(issurance)???(renewal)???(validation)??????????????(1)WS-Trust????????????????????(issuance)???(renewal)???(validation)???(2)Web???????ID???????????????????(3)?????????????????? ?????? Oracle Direct

  Read the article

• Setting up Mono/ASP.NET 4.0 on Apache2/Ubuntu: Virtual hosts?

  - by Dave

  I'm attempting to setup Mono/ASP.NET 4.0 on my Apache server (which is running on Ubuntu). Thus far, I've been following a few tutorials/scripts supplied here, and here. As of now: Apache 2.2 is installed (accessible via 'localhost') Mono 2.10.5 is installed However, I'm struggling to configure Apache correctly... apparently the Virtual Host setting isn't doing its job and invoking the mod_mono plugin, nor is it even pulling source from the proper directory. While the Virtual Host setting points to '\srv\www\localhost', it clearly is pulling content instead from 'var/www/', which I've found is the default DocumentRoot for virtual hosts. I can confirm: "/opt/mono-2.10/bin/mod-mono-server4" exists. Virtual hosts file is being read, since undoing the comment in the main httpd.conf changed the root directory from 'htdocs' to 'var/www/' The Mono installation is at least semi-capable of running ASP 4.0, as evidenced by running XSP, navigating to 0.0.0.0:8080/ and getting an ASP.NET style error page with "Mono ASP 4.0.x" at the bottom. Can anyone point out how to fix these configurations and get Mono linked up with Apache? Here are my configs and relevant information: /usr/local/apache2/conf/httpd.conf: # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo_log" # with ServerRoot set to "/usr/local/apache2" will be interpreted by the # server as "/usr/local/apache2/logs/foo_log". # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "/usr/local/apache2" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User daemon Group daemon </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin david@localhost # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # ServerName localhost:80 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/usr/local/apache2/htdocs" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/usr/local/apache2/htdocs"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "logs/error_log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "logs/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access_log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/usr/local/apache2/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig conf/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile conf/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or 0 for unlimited # Default setting is to accept 200 Ranges #MaxRanges 0 # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf # Multi-language error messages #Include conf/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include conf/extra/httpd-autoindex.conf # Language settings #Include conf/extra/httpd-languages.conf # User home directories #Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include conf/extra/httpd-info.conf # Virtual hosts Include conf/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include conf/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include conf/extra/httpd-dav.conf # Various default settings #Include conf/extra/httpd-default.conf # Secure (SSL/TLS) connections #Include conf/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> * /usr/local/apache2/conf/extra/httpd-vhosts.conf * # # Virtual Hosts # # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # NameVirtualHost *:80 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # <VirtualHost *:80> ServerName localhost ServerAdmin david@localhost DocumentRoot "/srv/www/localhost" # MonoServerPath can be changed to specify which version of ASP.NET is hosted # mod-mono-server1 = ASP.NET 1.1 / mod-mono-server2 = ASP.NET 2.0 # For SUSE Linux Enterprise Mono Extension, uncomment the line below: # MonoServerPath localhost "/opt/novell/mono/bin/mod-mono-server2" # For Mono on openSUSE, uncomment the line below instead: MonoServerPath localhost "/opt/mono-2.10/bin/mod-mono-server4" # To obtain line numbers in stack traces you need to do two things: # 1) Enable Debug code generation in your page by using the Debug="true" # page directive, or by setting <compilation debug="true" /> in the # application's Web.config # 2) Uncomment the MonoDebug true directive below to enable mod_mono debugging MonoDebug localhost true # The MONO_IOMAP environment variable can be configured to provide platform abstraction # for file access in Linux. Valid values for MONO_IOMAP are: # case # drive # all # Uncomment the line below to alter file access behavior for the configured application MonoSetEnv localhost PATH=/opt/mono-2.10/bin:$PATH;LD_LIBRARY_PATH=/opt/mono-2.10/lib:$LD_LIBRARY_PATH; # # Additional environtment variables can be set for this server instance using # the MonoSetEnv directive. MonoSetEnv takes a string of 'name=value' pairs # separated by semicolons. For instance, to enable platform abstraction *and* # use Mono's old regular expression interpreter (which is slower, but has a # shorter setup time), uncomment the line below instead: # MonoSetEnv localhost MONO_IOMAP=all;MONO_OLD_RX=1 MonoApplications localhost "/:/srv/www/localhost" <Location "/"> Allow from all Order allow,deny MonoSetServerAlias localhost SetHandler mono SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary </Location> <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript </IfModule> </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/usr/local/apache2/docs/dummy-host.example.com" ServerName dummy-host.example.com ServerAlias www.dummy-host.example.com ErrorLog "logs/dummy-host.example.com-error_log" CustomLog "logs/dummy-host.example.com-access_log" common </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/usr/local/apache2/docs/dummy-host2.example.com" ServerName dummy-host2.example.com ErrorLog "logs/dummy-host2.example.com-error_log" CustomLog "logs/dummy-host2.example.com-access_log" common </VirtualHost> mono -V output: root@david-ubuntu:~# mono -V Mono JIT compiler version 2.6.7 (Debian 2.6.7-5ubuntu3) Copyright (C) 2002-2010 Novell, Inc and Contributors. www.mono-project.com TLS: __thread GC: Included Boehm (with typed GC and Parallel Mark) SIGSEGV: altstack Notifications: epoll Architecture: amd64 Disabled: none

  Read the article

• Windows could not start Apache 2 on the local computer

  - by andig

  After installing PHP 5.3, Windows is unable to start Apache 2.2. Apache's error log is empty, no error message on startup: C:\Programme\Apache\bin>httpd -k start C:\Programme\Apache\bin>httpd -k stop The Apache2.2 service is not started. C:\Programme\Apache\bin>httpd -k config Reconfiguring the Apache2.2 service The Apache2.2 service is successfully installed. Testing httpd.conf.... Errors reported here must be corrected before the service can be started. I have no clue where to look for the cause. php5apache2_2.dll is copied to the Apache modules folder. The configuration looks like this: LoadModule php5_module modules/php5apache2_2.dll PHPIniDir "C:/programme/php" Where and how can I start diagnosis? The only hint I have so far is that startup fails as soon as a PHP module is enabled in the configuration. Is there a way to get more details out of the Apache startup process? This is the http.conf: # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "C:/Programme/Apache" will be interpreted by the # server as "C:/Programme/Apache/logs/foo.log". # # NOTE: Where filenames are specified, you must use forward slashes # instead of backslashes (e.g., "c:/apache" instead of "c:\apache"). # If a drive letter is omitted, the drive on which httpd.exe is located # will be used by default. It is recommended that you always supply # an explicit drive letter in absolute paths to avoid confusion. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "C:/Programme/Apache" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so #LoadModule auth_digest_module modules/mod_auth_digest.so #LoadModule authn_alias_module modules/mod_authn_alias.so #LoadModule authn_anon_module modules/mod_authn_anon.so #LoadModule authn_dbd_module modules/mod_authn_dbd.so #LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authn_file_module modules/mod_authn_file.so #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so #LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so #LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule autoindex_module modules/mod_autoindex.so #LoadModule cache_module modules/mod_cache.so #LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule cgi_module modules/mod_cgi.so #LoadModule charset_lite_module modules/mod_charset_lite.so #LoadModule dav_module modules/mod_dav.so #LoadModule dav_fs_module modules/mod_dav_fs.so #LoadModule dav_lock_module modules/mod_dav_lock.so #LoadModule dbd_module modules/mod_dbd.so #LoadModule deflate_module modules/mod_deflate.so LoadModule dir_module modules/mod_dir.so #LoadModule disk_cache_module modules/mod_disk_cache.so #LoadModule dumpio_module modules/mod_dumpio.so LoadModule env_module modules/mod_env.so #LoadModule expires_module modules/mod_expires.so #LoadModule ext_filter_module modules/mod_ext_filter.so #LoadModule file_cache_module modules/mod_file_cache.so #LoadModule filter_module modules/mod_filter.so #LoadModule headers_module modules/mod_headers.so #LoadModule ident_module modules/mod_ident.so #LoadModule imagemap_module modules/mod_imagemap.so LoadModule include_module modules/mod_include.so #LoadModule info_module modules/mod_info.so LoadModule isapi_module modules/mod_isapi.so #LoadModule ldap_module modules/mod_ldap.so #LoadModule logio_module modules/mod_logio.so LoadModule log_config_module modules/mod_log_config.so #LoadModule log_forensic_module modules/mod_log_forensic.so #LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule mime_module modules/mod_mime.so #LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule negotiation_module modules/mod_negotiation.so #LoadModule proxy_module modules/mod_proxy.so #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule proxy_connect_module modules/mod_proxy_connect.so #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule proxy_http_module modules/mod_proxy_http.so #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so #LoadModule reqtimeout_module modules/mod_reqtimeout.so #LoadModule rewrite_module modules/mod_rewrite.so LoadModule setenvif_module modules/mod_setenvif.so #LoadModule speling_module modules/mod_speling.so #LoadModule ssl_module modules/mod_ssl.so #LoadModule status_module modules/mod_status.so #LoadModule substitute_module modules/mod_substitute.so #LoadModule unique_id_module modules/mod_unique_id.so #LoadModule userdir_module modules/mod_userdir.so #LoadModule usertrack_module modules/mod_usertrack.so #LoadModule version_module modules/mod_version.so #LoadModule vhost_alias_module modules/mod_vhost_alias.so #!! LoadModule php5_module modules/php5apache2_2.dll PHPIniDir "C:/programme/php" <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User daemon Group daemon </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin [email protected] # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName localhost:8080 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "C:/data/htdocs" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "C:/data/htdocs"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "logs/error.log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel debug <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "logs/access.log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access.log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://localhost/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "C:/Programme/Apache/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "C:/Programme/Apache/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "C:/Programme/Apache/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig conf/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile conf/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://localhost/subscription_info.html # # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf # Multi-language error messages #Include conf/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include conf/extra/httpd-autoindex.conf # Language settings #Include conf/extra/httpd-languages.conf # User home directories #Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include conf/extra/httpd-info.conf # Virtual hosts #Include conf/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include conf/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include conf/extra/httpd-dav.conf # Various default settings #Include conf/extra/httpd-default.conf # Secure (SSL/TLS) connections #Include conf/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> #!! <IfModule mod_php5.c> AddType application/x-httpd-php .php AddType application/x-httpd-php .php5 AddType application/x-httpd-php-source .phps </IfModule>

  Read the article

• Wired connection periodically disconnects requires ipconfig /release and /renew to reconnect

  - by Sesame

  I just got back into University and after a day of using the internet I suddenly was unable to visit other webpages even though I was still able to chat. I restarted the computer and the internet could no longer visit webpages at all. I got a DNS error from the browser (chrome) and the troubleshooter. The connection comes up as "Network 3" even though It was "Network 2" when it worked. I compared ipconfig /all logs and they seemed identical when it was and was not working. I've found two ways to get internet connection (they no longer work): run ipconfig /release and ipconfig /renew several times set a random address and have the troubleshooter fix the new found dhcp problem (before it says dns cannot fix). I checked and it said DHCP was enabled. But either step one or two usually needs to be repeated several times before the network will change back to "network 2" from the defunct "network 3" and after an hour or so I have problems again. I've tried: Uninstalling windows defender and turning off firewall (windows firewall). Updating Qualcomm Ethernet driver - it is up to date. System Restore (problem resurfaces quickly...it's possible this has something to do with windows update?) Flushing dns and setting dns myself (google one and others). Booting in safe mode with networking...didn't fix anything Reinstalling Ethernet Driver Using other ethernet cable, other wall port. I'm out of ideas. Ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : NGoller Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : Home Ethernet adapter UConnect: Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 90-2B-34-50-33-F4 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : fd00::2086:628:f0a1:73c3(Preferred) Temporary IPv6 Address. . . . . . : fd00::c86b:370:b1d9:bd73(Preferred) Link-local IPv6 Address . . . . . : fe80::2086:628:f0a1:73c3%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.33(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, August 28, 2013 11:58:37 PM Lease Expires . . . . . . . . . . : Thursday, August 29, 2013 11:58:37 PM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.Home: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes I'm getting these errors commonly: The IP address lease 155.97.227.199 for the Network Card with network address 0x902B345033F4 has been denied by the DHCP server 10.0.1.1 (The DHCP Server sent a DHCPNACK message). Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. By the way, Operating System: Windows 7 - 64 Bit. Have downloaded latest windows updates. Update: And my two fixes don't work any more :( . This is now what happens when I try to Ipconfig /renew: C:\Users\Nikko\Desktop>ipconfig /renew Windows IP Configuration An error occurred while renewing interface Local Area Connection : The name spec ified in the network control block (NCB) is in use on a remote adapter. The NCB is the data. An error occurred while releasing interface Loopback Pseudo-Interface 1 : The sy stem cannot find the file specified. Update 2: So my internet is randomly working again today. The IP address I had before was a local one while the university address should start with 155... I didn't do anything to the settings...it's bizarre that it all of a sudden works. Thanks!

  Read the article

• SmoApplication.EnumAvailableSqlServers returns server names but not instance names (but only on one

  - by Matma

  Hi, There are a number of questions about this and a number of possible causes and thus far ive tried them all with no success. situation: i have an app that needs a db to work, onstartup it does a SmoApplication.EnumAvailableSqlServers(false) to get all the instances on the network, shows the user a dropdown, they pick one and i go connect to my db on that server. all good problem: this works on my machine, the guys next to me and others. HOWEVER it doesnt work on one of the tech guys machines (and potentially others). we are all on the same network domain, physically connected (no wireless), all logged on with network user names, all running the same sql express 2005 sp3, though im using win7 the other guys are running xppro. MSSMS on all machines can see all the instances when you select "Browse for more". yet on this one tech guys machine it lists his local instance (since its hardcoded to) and all the network servers, but has no instances names? i.e. .sqlexpress server1 server2 server3 server4 but on my machine and others we get: .sqlexpress server1/sqlexpress server2/sqlexpress server3/sqlexpress server4/sqlexpress the code im using: ' .... some code ' this populates my datatable dtServers = SmoApplication.EnumAvailableSqlServers(False) '.... some code '.... then later i ShowServers(...) Private dtServers As DataTable = Nothing Private Sub ShowServers(ByVal SQLInstance As String) ' Create a DataTable where we enumerate the available servers cmbServer.Items.Clear() cmbDatabase.Items.Clear() ' If there are any (network listed) servers at all If (dtServers.Rows.Count > 0) Then ' Loop through each server in the DataTable For Each drServer As DataRow In dtServers.Rows ' Add the name to the combobox cmbServer.Items.Add(drServer("Server") & "\" & drServer("Instance")) Next End If 'To make life simpler (add the local instance of sql express): cmbServer.Items.Add(SQLInstance) ' select first item If cmbServer.Items.Count > 0 Then cmbServer.SelectedIndex = 0 End If End Sub now i know this uses udp and its not 100%, but how come his machine is 100% consistent in not showing remote instances, and mine is 100 consistent showing them. even a udl file on his desktop cant see them, regarldess of provider i choose to use? some of the suggestions are to uninstall and re-install, but that doesnt seem like a solution as i (and most others) can see the instances, but one guy cant. this suggests its not the remote sql server but rather the local machine. Notes: ive tried firewall 1433, 1434 i can connect using a udl with full SERVERNAME\INSTANCENAME the browser service is running locally and on the remote machine ive tried stopping and restarting both the browser service on the local and remote machine. Ideas?

  Read the article

• Tools and Utilities for the .NET Developer

  - by mbcrump

  Tweet this list! Add a link to my site to your bookmarks to quickly find this page again! Add me to twitter! This is a list of the tools/utilities that I use to do my job/hobby. I wanted this page to load fast and contain information that only you care about. If I have missed a tool that you like, feel free to contact me and I will add it to the list. Also, this list took a lot of time to complete. Please do not steal my work, if you like the page then please link back to my site. I will keep the links/information updated as new tools/utilities are created.  Windows/.NET Development – This is a list of tools that any Windows/.NET developer should have in his bag. I have used at some point in my career everything listed on this page and below is the tools worth keeping. Name Description License AnkhSVN Subversion support for Visual Studio. It also works with VS2010. Free Aurora XAML Designer One of the best XAML creation tools available. Has a ton of built in templates that you can copy/paste into VS2010. COST/Trial BeyondCompare Beyond Compare 3 is the ideal tool for comparing files and folders on your Windows or Linux system. Visualize changes in your code and carefully reconcile them. COST/Trial BuildIT Automated Task Tool Its main purpose is to automate tasks, whether it is the final packaging of a product, an automated daily build, maybe sending out a mailing list, even backing-up files. Free C Sharper for VB Convert VB to C#. COST CLRProfiler Analyze and improve the behavior of your .NET app. Free CodeRush Direct competitor to ReSharper, contains similar feature. This is one of those decide for yourself. COST/Trial Disk2VHD Disk2vhd is a utility that creates VHD (Virtual Hard Disk - Microsoft's Virtual Machine disk format) versions of physical disks for use in Microsoft Virtual PC or Microsoft Hyper-V virtual machines (VMs). Free Eazfuscator.NET Is a free obfuscator for .NET. The main purpose is to protect intellectual property of software. Free EQATEC Profiler Make your .NET app run faster. No source code changes are needed. Just point the profiler to your app, run the modified code, and get a visual report. COST Expression Studio 3/4 Comes with Web, Blend, Sketch Flow and more. You can create websites, produce beautiful XAML and more. COST/Trial Expresso The award-winning Expresso editor is equally suitable as a teaching tool for the beginning user of regular expressions or as a full-featured development environment for the experienced programmer or web designer with an extensive knowledge of regular expressions. Free Fiddler Fiddler is a web debugging proxy which logs all HTTP(s) traffic between your computer and the internet. Free Firebug Powerful Web development tool. If you build websites, you will need this. Free FxCop FxCop is an application that analyzes managed code assemblies (code that targets the .NET Framework common language runtime) and reports information about the assemblies, such as possible design, localization, performance, and security improvements. Free GAC Browser and Remover Easy way to remove multiple assemblies from the GAC. Assemblies registered by programs like Install Shield can also be removed. Free GAC Util The Global Assembly Cache tool allows you to view and manipulate the contents of the global assembly cache and download cache. Free HelpScribble Help Scribble is a full-featured, easy-to-use help authoring tool for creating help files from start to finish. You can create Win Help (.hlp) files, HTML Help (.chm) files, a printed manual and online documentation (on a web site) all from the same Help Scribble project. COST/Trial IETester IETester is a free Web Browser that allows you to have the rendering and JavaScript engines of IE9 preview, IE8, IE7 IE 6 and IE5.5 on Windows 7, Vista and XP, as well as the installed IE in the same process. Free iTextSharp iText# (iTextSharp) is a port of the iText open source java library for PDF generation written entirely in C# for the .NET platform. Use the iText mailing list to get support. Free Kaxaml Kaxaml is a lightweight XAML editor that gives you a "split view" so you can see both your XAML and your rendered content. Free LINQPad LinqPad lets you interactively query databases in a LINQ. Free Linquer Many programmers are familiar with SQL and will need a help in the transition to LINQ. Sometimes there are complicated queries to be written and Linqer can help by converting SQL scripts to LINQ. COST/Trial LiquidXML Liquid XML Studio 2010 is an advanced XML developers toolkit and IDE, containing all the tools needed for designing and developing XML schema and applications. COST/Trial Log4Net log4net is a tool to help the programmer output log statements to a variety of output targets. log4net is a port of the excellent log4j framework to the .NET runtime. We have kept the framework similar in spirit to the original log4j while taking advantage of new features in the .NET runtime. For more information on log4net see the features document. Free Microsoft Web Platform Installer The Microsoft Web Platform Installer 2.0 (Web PI) is a free tool that makes getting the latest components of the Microsoft Web Platform, including Internet Information Services (IIS), SQL Server Express, .NET Framework and Visual Web Developer easy. Free Mono Development Don't have Visual Studio - no problem! This is an open Source C# and .NET development environment for Linux, Windows, and Mac OS X Free Net Mass Downloader While it’s great that Microsoft has released the .NET Reference Source Code, you can only get it one file at a time while you’re debugging. If you’d like to batch download it for reading or to populate the cache, you’d have to write a program that instantiated and called each method in the Framework Class Library. Fortunately, .NET Mass Downloader comes to the rescue! Free nMap Nmap ("Network Mapper") is a free and open source (license) utility for network exploration or security auditing. Many systems and network administrators also find it useful for tasks such as network inventory, managing service upgrade schedules, and monitoring host or service uptime. Free NoScript (Firefox add-in) The NoScript Firefox extension provides extra protection for Firefox, Flock, Seamonkey and other Mozilla-based browsers: this free, open source add-on allows JavaScript, Java and Flash and other plug-ins to be executed only by trusted web sites of your choice (e.g. your online bank), and provides the most powerful Anti-XSS protection available in a browser. Free NotePad 2 Notepad2, a fast and light-weight Notepad-like text editor with syntax highlighting. This program can be run out of the box without installation, and does not touch your system's registry. Free PageSpy PageSpy is a small add-on for Internet Explorer that allows you to select any element within a webpage, select an option in the context menu, and view detailed information about both the coding behind the page and the element you selected. Free Phrase Express PhraseExpress manages your frequently used text snippets in customizable categories for quick access. Free PowerGui PowerGui is a free community for PowerGUI, a graphical user interface and script editor for Microsoft Windows PowerShell! Free Powershell Comes with Win7, but you can automate tasks by using the .NET Framework. Great for network admins. Free Process Explorer Ever wondered which program has a particular file or directory open? Now you can find out. Process Explorer shows you information about which handles and DLLs processes have opened or loaded. Also, included in the SysInterals Suite. Free Process Monitor Process Monitor is an advanced monitoring tool for Windows that shows real-time file system, Registry and process/thread activity. Free Reflector Explore and analyze compiled .NET assemblies, viewing them in C#, Visual Basic, and IL. This is an Essential for any .NET developer. Free Regular Expression Library Stuck on a Regular Expression but you think someone has already figured it out? Chances are they have. Free Regulator Regulator makes Regular Expressions easy. This is a must have for a .NET Developer. Free RenameMaestro RenameMaestro is probably the easiest batch file renamer you'll find to instantly rename multiple files COST ReSharper The one program that I cannot live without. Supports VS2010 and offers simple refactoring, code analysis/assistance/cleanup/templates. One of the few applications that is worth the $$$. COST/Trial ScrewTurn Wiki ScrewTurn Wiki allows you to create, manage and share wikis. A wiki is a collaboratively-edited, information-centered website: the most famous is Wikipedia. Free SharpDevelop What is #develop? SharpDevelop is a free IDE for C# and VB.NET projects on Microsoft's .NET platform. Free Show Me The Template Show Me The Template is a tool for exploring the templates, be their data, control or items panel, that comes with the controls built into WPF for all 6 themes. Free SnippetCompiler Compiles code snippets without opening Visual Studio. It does not support .NET 4. Free SQL Prompt SQL Prompt is a plug-in that increases how fast you can work with SQL. It provides code-completion for SQL server, reformatting, db schema information and snippets. Awesome! COST/Trial SQLinForm SQLinForm is an automatic SQL code formatter for all major databases  including ORACLE, SQL Server, DB2, UDB, Sybase, Informix, PostgreSQL, Teradata, MySQL, MS Access etc. with over 70 formatting options. COST/OnlineFree SSMS Tools SSMS Tools Pack is an add-in for Microsoft SQL Server Management Studio (SSMS) including SSMS Express. Free Storm STORM is a free and open source tool for testing web services. Free Telerik Code Convertor Convert code from VB to C Sharp and Vice Versa. Free TurtoiseSVN TortoiseSVN is a really easy to use Revision control / version control / source control software for Windows.Since it's not an integration for a specific IDE you can use it with whatever development tools you like. Free UltraEdit UltraEdit is the ideal text, HTML and hex editor, and an advanced PHP, Perl, Java and JavaScript editor for programmers. UltraEdit is also an XML editor including a tree-style XML parser. An industry-award winner, UltraEdit supports disk-based 64-bit file handling (standard) on 32-bit Windows platforms (Windows 2000 and later). COST/Trial Virtual Windows XP Comes with some W7 version and allows you to run WinXP along side W7. Free VirtualBox Virtualization by Sun Microsystems. You can virtualize Windows, Linux and more. Free Visual Log Parser SQL queries against a variety of log files and other system data sources. Free WinMerge WinMerge is an Open Source differencing and merging tool for Windows. WinMerge can compare both folders and files, presenting differences in a visual text format that is easy to understand and handle. Free Wireshark Wireshark is one of the best network protocol analyzer's for Unix and windows. This has been used several times to get me out of a bind. Free XML Notepad 07 Old, but still one of my favorite XML viewers. Free Productivity Tools – This is the list of tools that I use to save time or quickly navigate around Windows. Name Description License AutoHotKey Automate almost anything by sending keystrokes and mouse clicks. You can write a mouse or keyboard macro by hand or use the macro recorder. Free CLCL CLCL is clipboard caching utility. Free Ditto Ditto is an extension to the standard windows clipboard. It saves each item placed on the clipboard allowing you access to any of those items at a later time. Ditto allows you to save any type of information that can be put on the clipboard, text, images, html, custom formats, ..... Free Evernote Remember everything from notes to photos. It will synch between computers/devices. Free InfoRapid Inforapid is a search tool that will display all you search results in a html like browser. If you click on a word in that browser, it will start another search to the word you clicked on. Handy if you want to trackback something to it's true origin. The word you looked for will be highlighted in red. Clicking on the red word will open the containing file in a text based viewer. Clicking on any word in the opened document will start another search on that word. Free KatMouse The prime purpose of the KatMouse utility is to enhance the functionality of mice with a scroll wheel, offering 'universal' scrolling: moving the mouse wheel will scroll the window directly beneath the mouse cursor (not the one with the keyboard focus, which is default on Windows OSes). This is a major increase in the usefulness of the mouse wheel. Free ScreenR Instant Screencast with nothing to download. Works with Mac or PC and free. Free Start++ Start++ is an enhancement for the Start Menu in Windows Vista. It also extends the Run box and the command-line with customizable commands.  For example, typing "w Windows Vista" will take you to the Windows Vista page on Wikipedia! Free Synergy Synergy lets you easily share a single mouse and keyboard between multiple computers with different operating systems, each with its own display, without special hardware. It's intended for users with multiple computers on their desk since each system uses its own monitor(s). Free Texter Texter lets you define text substitution hot strings that, when triggered, will replace hotstring with a larger piece of text. By entering your most commonly-typed snippets of text into Texter, you can save countless keystrokes in the course of the day. Free Total Commander File handling, FTP, Archive handling and much more. Even works with Win3.11. COST/Trial Available Wizmouse WizMouse is a mouse enhancement utility that makes your mouse wheel work on the window currently under the mouse pointer, instead of the currently focused window. This means you no longer have to click on a window before being able to scroll it with the mouse wheel. This is a far more comfortable and practical way to make use of the mouse wheel. Free Xmarks Bookmark sync and search between computers. Free General Utilities – This is a list for power user users or anyone that wants more out of Windows. I usually install a majority of these whenever I get a new system. Name Description License µTorrent µTorrent is a lightweight and efficient BitTorrent client for Windows or Mac with many features. I use this for downloading LEGAL media. Free Audacity Audacity® is free, open source software for recording and editing sounds. It is available for Mac OS X, Microsoft Windows, GNU/Linux, and other operating systems. Learn more about Audacity... Also check our Wiki and Forum for more information. Free AVast Free FREE Antivirus. Free CD Burner XP Pro CDBurnerXP is a free application to burn CDs and DVDs, including Blu-Ray and HD-DVDs. It also includes the feature to burn and create ISOs, as well as a multilanguage interface. Free CDEX You can extract digital audio CDs into mp3/wav. Free Combofix Combofix is a freeware (a legitimate spyware remover created by sUBs), Combofix was designed to scan a computer for known malware, spyware (SurfSideKick, QooLogic, and Look2Me as well as any other combination of the mentioned spyware applications) and remove them. Free Cpu-Z Provides information about some of the main devices of your system. Free Cropper Cropper is a screen capture utility written in C#. It makes it fast and easy to grab parts of your screen. Use it to easily crop out sections of vector graphic files such as Fireworks without having to flatten the files or open in a new editor. Use it to easily capture parts of a web site, including text and images. It's also great for writing documentation that needs images of your application or web site. Free DropBox Drag and Drop files to sync between computers. Free DVD-Fab Converts/Copies DVDs/Blu-Ray to different formats. (like mp4, mkv, avi) COST/Trial Available FastStone Capture FastStone Capture is a powerful, lightweight, yet full-featured screen capture tool that allows you to easily capture and annotate anything on the screen including windows, objects, menus, full screen, rectangular/freehand regions and even scrolling windows/web pages. Free ffdshow FFDShow is a DirectShow decoding filter for decompressing DivX, XviD, H.264, FLV1, WMV, MPEG-1 and MPEG-2, MPEG-4 movies. Free Filezilla FileZilla Client is a fast and reliable cross-platform FTP, FTPS and SFTP client with lots of useful features and an intuitive graphical user interface. You can also download a server version. Free FireFox Web Browser, do you really need an explanation? Free FireGestures A customizable mouse gestures extension which enables you to execute various commands and user scripts with five types of gestures. Free FoxIt Reader Light weight PDF viewer. You should install this with the advanced setting or it will install a toolbar and setup some shortcuts. Free gSynchIt Synch Gmail and Outlook. Even supports Outlook 2010 32/64 bit COST/Trial Available Hulu Desktop At home or in a hotel, this has replaced my cable/satellite subscription. Free ImgBurn ImgBurn is a lightweight CD / DVD / HD DVD / Blu-ray burning application that everyone should have in their toolkit! Free Infrarecorder InfraRecorder is a free CD/DVD burning solution for Microsoft Windows. It offers a wide range of powerful features; all through an easy to use application interface and Windows Explorer integration. Free KeePass KeePass is a free open source password manager, which helps you to manage your passwords in a secure way. Free LastPass Another password management, synchronize between browsers, automatic form filling and more. Free Live Essentials One download and lots of programs including Mail, Live Writer, Movie Maker and more! Free Monitores MonitorES is a small windows utility that helps you to turnoff monitor display when you lock down your machine.Also when you lock your machine, it will pause all your running media programs & set your IM status message to "Away" / Custom message(via options) and restore it back to normal when you back. Free mRemote mRemote is a full-featured, multi-tab remote connections manager. Free Open Office OpenOffice.org 3 is the leading open-source office software suite for word processing, spreadsheets, presentations, graphics, databases and more. It is available in many languages and works on all common computers. It stores all your data in an international open standard format and can also read and write files from other common office software packages. It can be downloaded and used completely free of charge for any purpose. Free Paint.NET Simple, intuitive, and innovative user interface for editing photos. Free Picasa Picasa is free photo editing software from Google that makes your pictures look great. Free Pidgin Pidgin is an easy to use and free chat client used by millions. Connect to AIM, MSN, Yahoo, and more chat networks all at once. Free PING PING is a live Linux ISO, based on the excellent Linux From Scratch (LFS) documentation. It can be burnt on a CD and booted, or integrated into a PXE / RIS environment. Free Putty PuTTY is an SSH and telnet client, developed originally by Simon Tatham for the Windows platform. Free Revo Uninstaller Revo Uninstaller Pro helps you to uninstall software and remove unwanted programs installed on your computer easily! Even if you have problems uninstalling and cannot uninstall them from "Windows Add or Remove Programs" control panel applet.Revo Uninstaller is a much faster and more powerful alternative to "Windows Add or Remove Programs" applet! It has very powerful features to uninstall and remove programs. Free Security Essentials Microsoft Security Essentials is a new, free consumer anti-malware solution for your computer. Free SetupVirtualCloneDrive Virtual CloneDrive works and behaves just like a physical CD/DVD drive, however it exists only virtually. Point to the .ISO file and it appears in Windows Explorer as a Drive. Free Shark 007 Codec Pack Play just about any file format with this download. Also includes my W7 Media Playlist Generator. Free Snagit 9 Screen Capture on steroids. Add arrows, captions, etc to any screenshot. COST/Trial Available SysinternalsSuite Go ahead and download the entire sys internals suite. I have mentioned multiple programs in this suite already. Free TeraCopy TeraCopy is a compact program designed to copy and move files at the maximum possible speed, providing the user with a lot of features. Free for Home TrueCrypt Free open-source disk encryption software for Windows 7/Vista/XP, Mac OS X, and Linux Free TweetDeck Fully featured Twitter client. Free UltraVNC UltraVNC is a powerful, easy to use and free software that can display the screen of another computer (via internet or network) on your own screen. The program allows you to use your mouse and keyboard to control the other PC remotely. It means that you can work on a remote computer, as if you were sitting in front of it, right from your current location. Free Unlocker Unlocks locked files. Pretty simple right? Free VLC Media Player VLC media player is a highly portable multimedia player and multimedia framework capable of reading most audio and video formats Free Windows 7 Media Playlist This program is special to my heart because I wrote it. It has been mentioned on podcast and various websites. It allows you to quickly create wvx video playlist for Windows Media Center. Free WinRAR WinRAR is a powerful archive manager. It can backup your data and reduce the size of email attachments, decompress RAR, ZIP and other files downloaded from Internet and create new archives in RAR and ZIP file format. COST/Trial Available Blogging – I use the following for my blog. Name Description License Insert Code for Windows Live Writer Insert Code for Windows Live Writer will format a snippet of text in a number of programming languages such as C#, HTML, MSH, JavaScript, Visual Basic and TSQL. Free LiveWriter Included in Live Essentials, but the ultimate in Windows Blogging Free PasteAsVSCode Plug-in for Windows Live Writer that pastes clipboard content as Visual Studio code. Preserves syntax highlighting, indentation and background color. Converts RTF, outputted by Visual Studio, into HTML. Free Desktop Management – The list below represent the best in Windows Desktop Management. Name Description License 7 Stacks Allows users to have "stacks" of icons in their taskbar. Free Executor Executor is a multi purpose launcher and a more advanced and customizable version of windows run. Free Fences Fences is a program that helps you organize your desktop and can hide your icons when they are not in use. Free RocketDock Rocket Dock is a smoothly animated, alpha blended application launcher. It provides a nice clean interface to drop shortcuts on for easy access and organization. With each item completely customizable there is no end to what you can add and launch from the dock. Free WindowsTab Tabbing is an essential feature of modern web browsers. Window Tabs brings the productivity of tabbed window management to all of your desktop applications. Free

  Read the article

• Long pause when accessing DFS namespace

  - by Matt

  We've recently migrated our Windows network to use DFS for shared files. DFS is working well, except for one annoying problem: users experience a significant delay when they try to access a DFS namespace that they have not accessed for some time. I have tried to troubleshoot the issue but have not had any success so far, and I was hoping someone here may have some pointers to help resolve the problem. Firstly, some background on our network: The network uses a Windows 2008 functional level Active Directory domain with two Windows 2008 DCs and two DNS servers (one on each of the DCs). The network is DNS only - no WINS. All computers are located at the same site and connected by Gigabit Ethernet. We have approximately 20 Domain-based DFS namespaces in Windows 2008 mode, and each DFS namespace has two Windows 2008 DFS namespace servers (the same two servers for all namespaces). All namespace servers are in FQDN mode and all folder targets are specified using their FQDN. All computers are up-to-date with Service Packs and patches. The actual folder targets (i.e. the SMB shares our DFS folders point to) are scattered across several file and application servers, all running Windows 2008 bar two application servers which run Windows 2003 R2, with no replication setup at all (e.g. all DFS folders currently only have one folder target). Some more detail on the problem: The namespace access delay is generally 1 - 10 seconds long and seems to occur when a particular computer has not accessed the requested namespace for approximately five minutes or more. For example, if the user has not accessed \\domain.name\namespace1\ for more than five minutes and attempts to access \\domain.name\namespace1\ via Windows Explorer, the Explorer window will freeze for 1 - 10 seconds before finally resuming and displaying the folders that exist in \\domain.name\namespace1. If they then close the Explorer window and attempt to access \\domain.name\namespace1\ again within five minutes the contents will be displayed almost instantly - if they wait longer than five minutes it will go through the 1 - 10 second pause again. Once "inside" the namespace everything is nice and snappy, it's just the initial connection to the namespace that is slow. The browsing delays seem to affect all variants of Windows that we use (Windows 2008 x64 SP2, Windows 2003 R2 x86 SP2, Windows XP Pro x86 SP3) - it is possibly a bit worse in Windows XP / 2003 than in Windows 2008, but I'm not sure if the difference isn't just psychological. Accessing the underlying folder targets directly exhibits no delay at all - i.e. if the SMB shares pointed to by DFS are accessed directly (bypassing DFS) then there is no pause. During trouble-shooting I noticed that the "Cache duration" for all of our DFS roots is set to 300 seconds - 5 minutes. Given that this is the same amount of time required to trigger the pause I assume that this caching is somehow related, although I am unsure exactly what is cached on the client and hence what needs to be looked up again after 5 minutes have elapsed. In trying to resolve the problem I have already tried / checked the following (without success): Run dcdiag on both Domain Controllers - no problems found Done some basic DNS server checks without finding any problems - I don't know how to check the DNS servers in detail, but I would add that the network is not exhibiting any other strange behavior that may point to a DNS problem Disabled Anti-virus on clients and servers Removing one of the namespace servers from a couple of namespaces - no difference So that's where I'm up to - and I'm out of ideas. Can anyone suggest what may be causing the delays and/or what I should be trying next?

  Read the article

• Apple Airport Express, Extreme and Time Capsules, BT Home Hub, Wireless Extenders confusion

  - by Jamie Hartnoll

  I post quite frequently in Stack Overflow, but use Superuser less frequently. Mainly as I don't change hardware often and rarely have software issues! I live in a small stone cottage, and have an office in a separate building across a yard. I have a BT Homehub which is located in the cottage and a series of Ethernet cables running across the yard to the office. This is fine for my wired stuff. My main office computers are PCs running Windows 7 Ultimate, and one on Win7 Home, all working fine. I also have an old laptop on Win XP which works fine wirelessly in the house for those evenings in front of the TV catching up on a bit of work. I also have an iPhone and an iPad. Recently, I have been trying to get WiFi in the office so I can use Adobe Shadow (or whatever it now is!) to improve mobile web development efficiency using my iPhone and iPad, so I bought this: http://www.ebuyer.com/393462-zyxel-wre2205-500mbps-powerline-wireless-n300-range-extender-wre2205-gb0101f Thinking that would be lovely just plugged into the socket by the door in the office, extending the perimeter of the WiFi from my Homehub. I can't get it to work properly! If I plug a laptop into its ethernet port I can get it to connect to the Homehub and give me a kinda of wired, wireless extender. If, however, I plug the ethernet port into my home hub, it then seems to extend the network, but only my iOs devices work, and all my wired stuff stops working, and seems to create an infinite loop where windows connects to my homehob, and then rather to the internet, it then connects back to the extender thing. Anyway... in the meantime, I took a fatal trip to the Apple Store, where I purchased an Airport Express... solely for the purpose of hooking my iOs devices up as wireless music players in the house. I knew it had WiFi, but didn't want to use that part as an extender, I didn't think it would work on a Homehub anyway. It doesn't work on a Homehub! I now have a new wireless network in the house, which, when anything connects to it cannot connect to the Internet, so it works ONLY as a wireless music player. I then borrowed some Powerline Adaptors from someone and realised that this whole thing was getting totally out of control! It seems all the technology is out there but it's so complicated to get the right series of devices. To further add to the confusion, I wouldn't mind a network hard drive. I bought one that broke and lost everything, so now we're on to looking at the Apple Time Capsules. So my question is... IF... I buy an Apple Time Capsule, can I: Hook that up to my Homehub, leaving the homehub connected to the Internet so my Hub phones still work, then disable wireless on the homehub Link up my Airport Express to the Time Capsule PROPERLY so it will connect to the Internet Do the above with an Apple TV box should I buy one in future Use the Time Capsule as a network hard drive to store video and music that can be viewed/listened to via my iOS devices/Apple TV/Aiport Express anywhere even with my main PC off (this currently stores all this data) Hope that the IOS devices like the WiFi from the TimeCapsule better than the Homehub and work without extension, or buy another Airport Express to get WiFI in the office. Or... should I buy an Airport Extreme and use a USB hard drive for the network drive?

  Read the article

• TLS (STARTTLS) Failure After 10.6 Upgrade to Open Directory Master

  - by Thomas Kishel

  Hello, Environment: Mac OS X 10.6.3 install/import of a MacOS X 10.5.8 Open Directory Master server. After that upgrade, LDAP+TLS fails on our MacOS X 10.5, 10.6, CentOS, Debian, and FreeBSD clients (Apache2 and PAM). Testing using ldapsearch: ldapsearch -ZZ -H ldap://gnome.darkhorse.com -v -x -b "dc=darkhorse,dc=com" '(uid=donaldr)' uid ... fails with: ldap_start_tls: Protocol error (2) Testing adding "-d 9" fails with: res_errno: 2, res_error: <unsupported extended operation>, res_matched: <> Testing without requiring STARTTLS or with LDAPS: ldapsearch -H ldap://gnome.darkhorse.com -v -x -b "dc=darkhorse,dc=com" '(uid=donaldr)' uid ldapsearch -H ldaps://gnome.darkhorse.com -v -x -b "dc=darkhorse,dc=com" '(uid=donaldr)' uid ... succeeds with: # donaldr, users, darkhorse.com dn: uid=donaldr,cn=users,dc=darkhorse,dc=com uid: donaldr # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 result: 0 Success (We are specifying "TLS_REQCERT never" in /etc/openldap/ldap.conf) Testing with openssl: openssl s_client -connect gnome.darkhorse.com:636 -showcerts -state ... succeeds: CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:SSLv2/v3 write client hello A SSL_connect:SSLv3 read server hello A depth=1 /C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department verify error:num=19:self signed certificate in certificate chain verify return:0 SSL_connect:SSLv3 read server certificate A SSL_connect:SSLv3 read server done A SSL_connect:SSLv3 write client key exchange A SSL_connect:SSLv3 write change cipher spec A SSL_connect:SSLv3 write finished A SSL_connect:SSLv3 flush data SSL_connect:SSLv3 read finished A --- Certificate chain 0 s:/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=MIS/CN=gnome.darkhorse.com i:/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department 1 s:/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department i:/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department --- Server certificate -----BEGIN CERTIFICATE----- <deleted for brevity> -----END CERTIFICATE----- subject=/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=MIS/CN=gnome.darkhorse.com issuer=/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department --- No client certificate CA names sent --- SSL handshake has read 2640 bytes and written 325 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: D3F9536D3C64BAAB9424193F81F09D5C53B7D8E7CB5A9000C58E43285D983851 Session-ID-ctx: Master-Key: E224CC065924DDA6FABB89DBCC3E6BF89BEF6C0BD6E5D0B3C79E7DE927D6E97BF12219053BA2BB5B96EA2F6A44E934D3 Key-Arg : None Start Time: 1271202435 Timeout : 300 (sec) Verify return code: 0 (ok) So we believe that the slapd daemon is reading our certificate and writing it to LDAP clients. Apple Server Admin adds ProgramArguments ("-h ldaps:///") to /System/Library/LaunchDaemons/org.openldap.slapd.plist and TLSCertificateFile, TLSCertificateKeyFile, TLSCACertificateFile, and TLSCertificatePassphraseTool to /etc/openldap/slapd_macosxserver.conf when enabling SSL in the LDAP section of the Open Directory service. While that appears enough for LDAPS, it appears that this is not enough for TLS. Comparing our 10.6 and 10.5 slapd.conf and slapd_macosxserver.conf configuration files yields no clues. Replacing our certificate (generated with a self-signed ca) with an Apple Server Admin generated self signed certificate results in no change in ldapsearch results. Setting -d to 256 in /System/Library/LaunchDaemons/org.openldap.slapd.plist logs: 4/13/10 5:23:35 PM org.openldap.slapd[82162] conn=384 op=0 EXT oid=1.3.6.1.4.1.1466.20037 4/13/10 5:23:35 PM org.openldap.slapd[82162] conn=384 op=0 do_extended: unsupported operation "1.3.6.1.4.1.1466.20037" 4/13/10 5:23:35 PM org.openldap.slapd[82162] conn=384 op=0 RESULT tag=120 err=2 text=unsupported extended operation Any debugging advice much appreciated. -- Tom Kishel

  Read the article

• how does openvpn decide which interface to get IP addrs from

  - by bkrupa

  Using ubuntu 10.04 on both ends. We have a client and server machine on the SAME network attempting to make a vpn connection. We use the config files from here and made minimal changes. The server and client start and seem to connect without any trouble. The server looks like: Wed Feb 23 22:13:22 2011 MULTI: multi_create_instance called Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Re-using SSL/TLS context Wed Feb 23 22:13:22 2011 192.168.1.55:47166 LZO compression initialized Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Local Options hash (VER=V4): 'f7df56b8' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Expected Remote Options hash (VER=V4): 'd79ca330' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 TLS: Initial packet from 192.168.1.55:47166, sid=69112e42 5458135b *...* Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Feb 23 22:13:22 2011 192.168.1.55:47166 [client1] Peer Connection Initiated with 192.168.1.55:47166 On the client side the connection looks like: Wed Feb 23 22:20:07 2011 [server] Peer Connection Initiated with [AF_INET]192.168.1.41:1194 Wed Feb 23 22:20:10 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Wed Feb 23 22:20:10 2011 PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.4,ping 10,ping-restart 120,ifconfig 10.8.0.50 255.255.255.0' ... Wed Feb 23 22:20:10 2011 /sbin/ifconfig tap0 10.8.0.50 netmask 255.255.255.0 mtu 1500 broadcast 10.8.0.255 Wed Feb 23 22:20:10 2011 Initialization Sequence Completed The openvpn server has been configured to assign ip addresses in the range 10.8.0.* and the client has been given 10.8.0.50. When I run the following nmap from the client: Starting Nmap 5.00 ( http://nmap.org ) at 2011-02-23 22:04 EST Host 10.8.0.50 is up (0.00047s latency). Nmap done: 256 IP addresses (1 host up) scanned in 30.34 seconds Host 192.168.1.1 is up (0.0025s latency). Host 192.168.1.18 is up (0.074s latency). Host 192.168.1.41 is up (0.0024s latency). Host 192.168.1.55 is up (0.00018s latency). Nmap done: 256 IP addresses (4 hosts up) scanned in 6.33 seconds If I run an nmap from the server on 10.8.0.* I get nothing. If the client has two interfaces (wireless and tap device) when you look for a certain ip address, how does it decide which interface to connect on? edit I am trying to set up a vpn so that I can connect to my home network from a remote network. It seems like openvpn is connecting but none of the computers on my home network appear as network machines even after the connection is "Established". Stripped versions of the client and server config files are posted below. Thanks for any help you can offer. server.conf port 1194 proto udp dev tap ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key # This file should be kept secret dh /etc/openvpn/easy-rsa/keys/dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 client.conf client dev tap dev-node tap0901 proto udp remote ********** 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client1.crt key client1.key comp-lzo verb 3 one other thing that might be helpful, I tried to connect using the openvpn gui for windows and the connection stalls out on "obtaining configuration" and the bar just scrolls forever.

  Read the article

• Static route works on one computer, not the other

  - by Dan

  I have been struggling with this for a couple days now, maybe I just need some people with a fresh perspective to figure out what the issue is. Basically I have a bunch of computers that are being routed through a specific gateway in order to access a web page that is hosted internally on a separate subnet. I set up static routes on all of the computers, and they all work... except one. Here's what a route print -4 looks like for a working computer (Windows 7): =========================================================================== Interface List 14...xx xx xx xx xx xx ......Broadcom 802.11n Network Adapter 11...xx xx xx xx xx xx ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 17...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.xxx.xxx.230 10.xxx.xxx.94 20 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 10.xxx.xxx.94 21 10.xxx.xxx.0 255.255.255.0 On-link 10.xxx.xxx.94 276 10.xxx.xxx.94 255.255.255.255 On-link 10.xxx.xxx.94 276 10.xxx.xxx.255 255.255.255.255 On-link 10.xxx.xxx.94 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.xxx.xxx.94 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.xxx.xxx.94 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 1 =========================================================================== And here's a route print -4 from the station that doesn't work (also Windows 7): =========================================================================== Interface List 10...xx xx xx xx xx xx ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.xxx.xxx.230 10.xxx.xxx.132 276 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 10.xxx.xxx.132 21 10.xxx.xxx.0 255.255.255.0 On-link 10.xxx.xxx.132 276 10.xxx.xxx.132 255.255.255.255 On-link 10.xxx.xxx.132 276 10.xxx.xxx.255 255.255.255.255 On-link 10.xxx.xxx.132 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.xxx.xxx.132 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.xxx.xxx.132 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 1 =========================================================================== Both of these stations are running Windows 7. So essentially what I am trying to do here is route all traffic to the 10.zzz.zzz.0 subnet through the 10.xxx.xxx.147 gateway. Everything else should go through the 10.xxx.xxx.230 gateway. This is the intended behavior, and again it is working everywhere but that one station. I noticed that the Active Route metric costs differ between the two stations, but I am new to the routing table and I am not sure how that is impacting the behavior. I hope I have been able to explain the situation clearly. Any help would be much appreciated. I can provide any additional information if needed!

  Read the article

• vagrant fails to bring up additional adapter for centos vm using virtual box provider

  - by Anadi Misra

  this is in continuation of the question asked here about host only adapter on dhcp I upgraded to vagrant 1.6.3 and the updated Vagrantfile to following setting for multiple adapters # add additional adapter for inter machine networking dev.vm.network :private_network, :type => "dhcp", :adapter => "2", :netmask => "255.255.255.0" it goes through creating adapters but then fails bringing up the mic on vm Anadis-MacBook-Pro:full-stack-env anadi$ vagrant up Bringing machine 'full-stack-env' up with 'virtualbox' provider... ==> full-stack-env: Clearing any previously set forwarded ports... ==> full-stack-env: Clearing any previously set network interfaces... ==> full-stack-env: Preparing network interfaces based on configuration... full-stack-env: Adapter 1: nat full-stack-env: Adapter 2: hostonly ==> full-stack-env: Forwarding ports... full-stack-env: 22 => 4223 (adapter 1) full-stack-env: 8080 => 8090 (adapter 1) ==> full-stack-env: Running 'pre-boot' VM customizations... ==> full-stack-env: Booting VM... ==> full-stack-env: Waiting for machine to boot. This may take a few minutes... full-stack-env: SSH address: 127.0.0.1:4223 full-stack-env: SSH username: vagrant full-stack-env: SSH auth method: private key full-stack-env: Warning: Connection timeout. Retrying... full-stack-env: Warning: Connection timeout. Retrying... full-stack-env: Warning: Remote connection disconnect. Retrying... ==> full-stack-env: Machine booted and ready! ==> full-stack-env: Checking for guest additions in VM... ==> full-stack-env: Setting hostname... ==> full-stack-env: Configuring and enabling network interfaces... The following SSH command responded with a non-zero exit status. Vagrant assumes that this means the command failed! ARPCHECK=no /sbin/ifup eth 2> /dev/null Stdout from the command: Device eth does not seem to be present, delaying initialization. Stderr from the command: how ever when I log in to the environment I see two network interfaces as expected Anadis-MacBook-Pro:full-stack-env anadi$ vagrant ssh Last login: Wed Jun 4 12:54:47 2014 from 10.0.2.2 [vagrant@full-stack-env ~]$ ifconfig eth0 Link encap:Ethernet HWaddr 08:00:27:BD:39:57 inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:febd:3957/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:511 errors:0 dropped:0 overruns:0 frame:0 TX packets:360 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54574 (53.2 KiB) TX bytes:46675 (45.5 KiB) eth1 Link encap:Ethernet HWaddr 08:00:27:A3:86:C9 inet addr:172.28.128.3 Bcast:172.28.128.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fea3:86c9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1360 (1.3 KiB) TX bytes:894 (894.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) I am bit confused here on why it is trying to add another mic (eth2)? In the VM I used for creating this vagrant box, I had added two NICs already.

  Read the article

< Previous Page | 519 520 521 522 523 524 525 526 527 528 529 530  | Next Page >