network access - Page 524

How to use Public IP in case of two ISP when two differs from each other

- by user1471995

Please bare with my long explanation but this is important to explain the actual problem. Please also pardon my knowledge with PFsense as i am new to this. I have single PFSense box with 3 Ethernet adapter. Before moving to configuration for these, i want to let you know i have two Ethernet based Internet Leased Line Connectivity let's call them ISP A and ISP B. Then last inetrface is LAN which is connected to network switch. Typical network diagram ISP A ----- PFSense ----> Switch ---- > Servers ISP B ----- ISP A (Initially Purchased) WAN IP:- 113.193.X.X /29 Gateway IP :- 113.193.X.A and other 4 usable public IP in same subnet(So the gateway for those IP are also same). ISP B (Recently Purchased) WAN IP:- 115.115.X.X /30 Gateway IP :- 115.115.X.B and other 5 usable public IP in different subnet(So the gateway for those IP is different), for example if 115.119.X.X2 is one of the IP from that list then the gateway for this IP is 115.119.X.X1. Configuration for 3 Interfaces Interface : WAN Network Port : nfe0 Type : Static IP Address : 113.193.X.X /29 Gateway : 113.193.X.A Interface : LAN Network Port : vr0 Type : Static IP Address : 192.168.1.1 /24 Gateway : None Interface : RELWAN Network Port : rl0 Type : Static IP Address : 115.115.X.X /30 (I am not sure of the subnet) Gateway : 115.115.X.B To use Public IP from ISP A i have done following steps a) Created Virtual IP using either ARP or IP Alias. b) Using Firewall: NAT: Port Forward i have created specific natting from one public IP to my internal Lan private IP for example :- WAN TCP/UDP * * 113.193.X.X1 53 (DNS) 192.168.1.5 53 (DNS) WAN TCP/UDP * * 113.193.X.X1 80 (HTTP) 192.168.1.5 80 (HTTP) WAN TCP * * 113.193.X.X2 80 (HTTP) 192.168.1.7 80 (HTTP) etc., c) Current state for Firewall: NAT: Outbound is Manual and whatever default rule are defined for the WAN those are only present. d) If this section in relevant then for Firewall: Rules at WAN tab then following default rule has been generated. * RFC 1918 networks * * * * * Block private networks * Reserved/not assigned by IANA * * * * * * To use Public IP from ISP B i have done following steps a) Created Virtual IP using either ARP or IP Alias. b) Using Firewall: NAT: Port Forward i have created specific natting from one public IP to my internal Lan private IP for example :- RELWAN TCP/UDP * * 115.119.116.X.X1 80 (HTTP) 192.168.1.11 80 (HTTP) c) Current state for Firewall: NAT: Outbound is Manual and whatever default rule are defined for the RELWAN those are only present. d) If this section in relevant then for Firewall: Rules at RELWAN tab then following default rule has been generated. * RFC 1918 networks * * * * * * Reserved/not assigned by IANA * * * * * * Last thing before my actual query is to make you aware that to have multiple Wan setup i have done following steps a) Under System: Gateways at Groups Tab i have created new group as following MultipleGateway WANGW, RELWAN Tier 2,Tier 1 Multiple Gateway Test b) Then Under Firewall: Rules at LAN tab i have created a rule for internal traffic as follows * LAN net * * * MultipleGateway none c) This setup works if unplug first ISP traffic start routing using ISP 2 and vice-versa. Now my main query and problem is i am not able to use public IP address allocated by ISP B, i have tried many small tweaks but not successful in anyone. The notable difference between the two ISP is a) In case of ISP A there Public usable IP address are on same subnet so the gateway used for the WAN ip is same for the other public IP address. b) In case of ISP B there public usable IP address are on different subnet so the obvious the gateway IP for them is different from WAN gateway's IP. Please let me know how to use ISP B public usable IP address, in future also i am going to rely for more IPs from ISP B only.

Read the article

can't connect 2 subnets through RRAS 2008 r2

- by mcdwight6

I'm working on a project for a networking class. In VMWare Workstation, I have to set up a 2008 r2 server with DHCP reservations for 2 clients on separate subnets and have them ping each other. Here is the output of the route print command: =========================================================================== Interface List 13 ...00 50 56 2a e7 11 ...... Intel(R) PRO/1000 MT Network Connection #3 10 ...00 0c 29 66 88 dd ...... Intel(R) PRO/1000 MT Network Connection 1 ........................... Software Loopback Interface 1 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 14 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 16 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 17 ...00 00 00 00 00 00 00 e0 isatap.{5B8FB196-616F-4168-A020-03E63A309CEC} =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.0.2 266 0.0.0.0 0.0.0.0 On-link 223.6.6.2 266 10.0.0.0 255.0.0.0 On-link 10.0.0.2 266 10.0.0.2 255.255.255.255 On-link 10.0.0.2 266 10.255.255.255 255.255.255.255 On-link 10.0.0.2 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.6.0.0 255.255.0.0 On-link 10.0.0.2 11 128.6.255.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.0 255.255.255.0 On-link 10.0.0.2 11 223.6.6.0 255.255.255.0 On-link 223.6.6.2 266 223.6.6.2 255.255.255.255 On-link 223.6.6.2 266 223.6.6.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.255 255.255.255.255 On-link 223.6.6.2 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.0.0.2 266 224.0.0.0 240.0.0.0 On-link 223.6.6.2 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.0.0.2 266 255.255.255.255 255.255.255.255 On-link 223.6.6.2 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.0.0.2 Default 0.0.0.0 0.0.0.0 128.6.0.2 Default 0.0.0.0 0.0.0.0 223.6.6.2 Default 128.6.0.0 255.255.0.0 10.0.0.2 1 223.6.6.0 255.255.255.0 10.0.0.2 1 =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 1010 2002::/16 On-link 14 266 2002:8006:2::8006:2/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None My problem is that although I have set up both dynamic and persistent static routes in my r2 server, neither of the clients can ping even the NIC outside its own subnet. For example Client A can ping the NIC at 10.0.0.2 and vice-versa, but it gets a general transmit failure when it tries to ping the card at 223.6.6.2, let alone trying to ping the other client. I have completely disabled the firewalls on all machines and anything else I could think of, without success. What am I missing? Edit: Since posting this, I also noticed that the default gateways on my 2 NICs keep getting zeroed out. Does anyone know a fix for this?

Read the article

KVM with one host IP and a different subnet for machines

- by Jguy

I've already setup a KVM host with proper IP configurations, but my host had me create DHCP and use that to assign the IP's to the machines. I want to see if there's an easier way to do it (or better). Upon my first setting out on this, I didn't find anything that pointed me in the right direction. I'm coming off a fresh install of Debian 6.0 x64, so I have nothing installed. I've logged in, queried for the below information and changed the password from my host set one. I have a Debian 6.0 x64 system with the following initial network configuration (substituted 255 in place of my real first octave): # tail /etc/network/interfaces auto eth0 iface eth0 inet static address 255.9.24.80 broadcast 255.9.24.95 netmask 255.255.255.224 gateway 255.9.24.65 # default route to access subnet up route add -net 255.9.24.64 netmask 255.255.255.224 gw 255.9.24.65 eth0 I have a /29 subnet that I want the virtual machines to use from my host: IP: 255.46.187.152 /29 Mask: 255.255.255.248 Broadcast: 255.46.187.159 Usable IP addresses: 255.46.187.153 to 255.46.187.158 I like the interface of Cloudmin, so I want to try and use that if I can to administrate my guests. So, my questions: How do I set this up on the host system the best so that I can use the additional Subnet IP's on the guests and have them accessible from the internet? I also need to host a DNS server, which means one of these VM's has to have two IP's assigned to it and accessable from the outside world. How can I do that using Cloudmin? I had a question about this here: Multiple IP addresses assigned to one KVM VM But I just reformatted the entire server and am trying to figure out a better way of doing this. Machine information: # ip route show 255.9.24.64/27 via 255.9.24.65 dev eth0 255.9.24.64/27 dev eth0 proto kernel scope link src 255.9.24.80 default via 255.9.24.65 dev eth0 brctl is empty # ip addr list 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether c8:60:00:54:b5:d8 brd ff:ff:ff:ff:ff:ff inet 255.9.24.80/27 brd 255.9.24.95 scope global eth0 inet6 fe80::ca60:ff:fe54:b5d8/64 scope link valid_lft forever preferred_lft forever Thank you for any help you can provide me. EDIT: I've installed kvm and cloudmin: aptitude install qemu-kvm libvirt-bin wget http://cloudmin.virtualmin.com/gpl/scripts/cloudmin-kvm-debian-install.sh ./cloudmin-kvm-debian-install.sh Rebooted and now my network configuration looks like this: # device: eth0 iface eth0 inet manual # default route to access subnet iface br0 inet static address 255.9.24.80 netmask 255.255.255.224 broadcast 255.9.24.95 network 255.9.24.64 bridge_ports eth0 gateway 255.9.24.65 I setup in Cloudmin the Start IP as 255.46.187.153 and End IP as 255.46.187.158. The CIDR is 29 and the gateway is 255.46.187.152. I've installed a guest with ubuntuserver 12.04 x64, which was able to get and retrieve internet resources during installation, but now cannot reach anything nor can it be reached from anything. Its network configuration is: iface eth0 inet static address 255.46.187.153 netmask 255.255.255.224 broadcast 255.46.187.159 gateway 255.46.187.152 dns-nameservers <host provided nameservers> And is not able to ping google.com through DNS or direct IP, I can't ping the VM from the outside or the host. any ideas now?

Read the article

Listen to Over 100,000 Radio Stations in Windows Media Center

- by Mysticgeek

A cool feature in Windows 7 Media Center is the ability to listen to local FM radio. But what if you don’t have a tuner card that supports a connected radio antenna? The RadioTime plugin solves the problem by allowing access to thousands of online radio stations. With the RadioTime plugin for Windows Media Center, you’ll have access to over 100,000 online radio stations from around the world. Their guide is broken down into different categories such as Talk Radio, Music Radio, Sports Radio and more. It’s completely free, but does require registration to save preset stations. RadioTime It works with Media Center in XP, Vista, and Windows 7 (which we’re demonstrating here). When installing it for Windows 7, make sure to click the Installer link below the “Get It Now – Free” button as the installer works best for the new OS. Installation is extremely quick and easy… Now when you open Windows 7 Media Center you’ll find it located in the Extras category from the main menu. After you launch it, you’re presented with the RadioTime guide where you can browse through the different categories of stations. Your shown various station suggestions each time you start it up. The main categories are broken down further so you can find the right genre of the music your looking for. World Radio offers you stations from all over the world categorized into different regions. RadioTime does support local stations via an FM tuner, but if you don’t have one, you can still access local stations provided they broadcast online. One thing about listening to your local stations online is the audio quality may not be as good as if you had a tuner connected. It provides information on most of the online stations. For example here we look at Minnesota Public Radio info and you get a schedule of when certain programs are on. Then get even more information about the topics on the shows. To use the Presets option you’ll need to log into your RadioTime account, or if you don’t have one just click on the link to create a free one. Creating a free account is simple and basic on their site. You aren’t required to have an account to use the RadioTime plugin, it’s only if you want the additional benefits. Conclusion For this article we only tried it with Windows 7 Media Center, and sometimes the interface felt clunky when moving quickly through menus. Also, there isn’t a search feature from within Media Center, however, you can search stations from their site and add them to your presets. Despite a few shortcomings, this is a very cool way to get access to thousands of online radio stations through Windows Media Center. If you’re looking for a way to access thousands of radio stations through WMC, you might want to give RadioTime a try. Download RadioTime for Windows Media Center Similar Articles Productive Geek Tips Listen To XM Radio with Windows Media Center in Windows 7Listen and Record Over 12,000 Online Radio Stations with RadioSureUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Learning Windows 7: Manage Your Music with Windows Media PlayerSchedule Updates for Windows Media Center TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet

Read the article

Backup and Transfer Foobar2000 to a New Computer

- by Mysticgeek

If you are a fan of Foobar2000 you undoubtedly have tweaked it to the point where you don’t want to set it all up again on a new machine. Here we look at how to transfer Foobar2000 settings to a new Windows 7 machine. Note: For this article we are transferring Foobar2000 settings from on Windows 7 machine to another over a network running Windows Home Server. Foobar2000 Foobar2000 is an awesome music player which is highly customizable and we’ve previously covered. Here we take a look at how it’s set up on the current machine. It’s a nothing flashy, but is set up for our needs and includes a lot of components and playlists. Backup Files Rather than wasting time setting everything up again on a new machine, we can backup the important files and replace them on the new machine. First type or copy the following into the Explorer address bar. %appdata%\foobar2000 Now copy all of the files in the folder and store them on a network drive or some type removable media or device. New Machine Now you can install the latest version of Foobar2000 on your new machine. You can go with a Standard install as we will be replacing our backed up configuration files anyway. When it launches, it will be set with all the defaults…and we want what we had back. Browse to the following on the new machine… %appdata%\foobar2000 Delete all of the files in this directory… Then replace them with the ones we backed up from the other machine. You’ll also want to navigate to C:\Program Files\Foobar2000 and replace the existing Components folder with the backed up one. When you get the screen telling you there is already files of the same name, select Move and Replace, and check the box Do this for the next 6 conflicts. Now we’re back in business! Everything is exactly as it was on the old machine. In this example, we were moving the Foobar2000 files from a computer on the same home network. All the music is coming from a directory on our Windows Home Server so they hadn’t changed. If you’re moving these files to a computer on another machine… say your work computer, you’ll need to adjust where the music folders point to. Windows XP If you’re setting up Foobar2000 on an XP machine, you can enter the following into the Run line. %appdata%\foobar2000 Then copy your backed up files into the Foobar2000 folder, and remember to swap out the Components folder in C:\Program Files\Foobar2000. Confirm to replace the files and folders by clicking Yes to All… Conclusion This method worked perfectly for us on our home network setup. There might be some other things that will need a bit of tweaking, but overall the process is quick and easy. There is a lot of cool things you can do with Foobar2000 like rip an audio CD to FlAC. If you’re a fan of Foobar2000 or considering switching to it, we will be covering more awesome features in future articles. Download Foobar2000 – Windows Only Similar Articles Productive Geek Tips Backup or Transfer Microsoft Office 2007 Quick Parts Between ComputersBackup and Restore Internet Explorer’s Trusted Sites ListSecond Copy 7 [Review]Backup and Restore Firefox Profiles EasilyFoobar2000 is a Fully Customizable Music Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

Read the article

SQLAuthority News – Windows Efficiency Tricks and Tips – Personal Technology Tip

- by pinaldave

This is the second post in my series about my favorite Technology Tips, and I wanted to focus on my favorite Microsoft product. Choosing just one topic to cover was too hard, though. There are so many interesting things I have to share that I am forced to turn this second installment into a five-part post. My five favorite Windows tips and tricks. 1) You can open multiple applications using the task bar. With the new Windows 7 taskbar, you can start navigating with just one click. For example, you can launch Word by clicking on the icon on your taskbar, and if you are using multiple different programs at the same time, you can simply click on the icon to return to Word. However, what if you need to open another Word document, or begin a new one? Clicking on the Word icon is just going to bring you back to your original program. Just click on the Word icon again while holding down the shift key, and you’ll open up a new document. 2) Navigate the screen with the touch of a button – and not your mouse button. Yes, we live in a pampered age. We have access to amazing technology, and it just gets better every year. But have you ever found yourself wishing that right when you were in the middle of something, you didn’t have to interrupt your work flow be reaching for your mouse to navigate through the screen? Yes, we have all been guilty of this pampered wish. But Windows has delivered! Now you can move your application window using your arrow keys. Lock the window to the left, right hand screen: Win+left Arrow and Win+right Arrow Maximize & minimize: Win+up arrow and Win+down arrow Minimize all items on screen: Win+M Return to your original folder, or browse through all open windows: Alt+up arrow, Alt+Left Arrow, or Alt+right arrow Close down or reopen all windows: win+home 3) Are you one of the few people who still uses Command Prompt? You know who you are, and you aren’t ashamed to still use this option that so many people have forgotten about it. You can easily access it by holding down the shift key while RIGHT clicking on any folder. 4) Quickly select multiple files without using your mouse. We all know how to select multiple files or folders by Ctrl-clicking or Shift-clicking multiple items. But all of us have tried this, and then accidentally released Ctrl, only to lose all our precious work. Now there is a way to select only the files you want through a check box system. First, go to Windows Explorer, click Organize, and then “Folder and Search Options.” Go to the View tab, and under advanced settings, you can find a box that says “Use check boxes to select items.” Once this has been selected, you will be able to hover your mouse over any file and a check box will appear. This makes selecting multiple, random files quick and easy. 5) Make more out of remote access. If you work anywhere in the tech field, you are probably the go-to for computer help with friends and family, and you know the usefulness of remote access (ok, some of us use this extensively at work, as well, but we all have friends and family who rely on our skills!). Often it is necessary to restart a computer, which is impossible in remote access as the computer will not show the shutdown menu. To force the computer to do your wishes, we return to Command Prompt. Open Command Prompt and type “shutdown /s” for shutdown, or “shutdown /r” for restart. I hope you will find above five tricks which I use in my daily use very important. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Personal Technology

Read the article

Ask the Readers: Backing Your Files Up – Local Storage versus the Cloud

- by Asian Angel

Backing up important files is something that all of us should do on a regular basis, but may not have given as much thought to as we should. This week we would like to know if you use local storage, cloud storage, or a combination of both to back your files up. Photo by camknows. For some people local storage media may be the most convenient and/or affordable way to back up their files. Having those files stored on media under your control can also provide a sense of security and peace of mind. But storing your files locally may also have drawbacks if something happens to your storage media. So how do you know whether the benefits outweigh the disadvantages or not? Here are some possible pros and cons that may affect your decision to use local storage to back up your files: Local Storage Pros You are in control of your data Your files are portable and can go with you when needed if using external or flash drives Files are accessible without an internet connection You can easily add more storage capacity as needed (additional drives, etc.) Cons You need to arrange room for your storage media (if you have multiple externals drives, etc.) Possible hardware failure No access to your files if you forget to bring your storage media with you or it is too bulky to bring along Theft and/or loss of home with all contents due to circumstances like fire If you are someone who is always on the go and needs to travel as lightly as possible, cloud storage may be the perfect way for you to back up and access your files. Perhaps your laptop has a hard-drive failure or gets stolen…unhappy events to be sure, but you will still have a copy of your files available. Perhaps a company wants to make sure their records, files, and other information are backed up off site in case of a major hardware or system failure…expensive and/or frustrating to fix if it happens, but once again there is a nice backup ready to go once things are fixed. As with local storage, here are some possible pros and cons that may influence your choice of cloud storage to back up your files: Cloud Storage Pros No need to carry around flash or bulky external drives All of your files are accessible wherever there is an internet connection No need to deal with local storage media (or its’ upkeep) Your files are still safe if your home is broken into or other unfortunate circumstances occur Cons Your files and data are not 100% under your control Possible hardware failure or loss of files on the part of your cloud storage provider (this could include a disgruntled employee wreaking havoc) No access to your files if you do not have an internet connection The cloud storage provider may eventually shutdown due to financial hardship or other unforeseen circumstances The possibility of your files and data being stolen by hackers due to a security breach on the part of your cloud storage provider You may also prefer to try and cover all of the possibilities by using both local and cloud storage to back up your files. If something happens to one, you always have the other to fall back on. Need access to those files at or away from home? As long as you have access to either your storage media or an internet connection, you are good to go. Maybe you are getting ready to choose a backup solution but are not sure which one would work better for you. Here is your chance to ask your fellow HTG readers which one they would recommend. Got a great backup solution already in place? Then be sure to share it with your fellow readers! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know Winter Sunset by a Mountain Stream Wallpaper Add Sleek Style to Your Desktop with the Aston Martin Theme for Windows 7 Awesome WebGL Demo – Flight of the Navigator from Mozilla Sunrise on the Alien Desert Planet Wallpaper Add Falling Snow to Webpages with the Snowfall Extension for Opera [Browser Fun] Automatically Keep Up With the Latest Releases from Mozilla Labs in Firefox 4.0

Read the article

Hello World Pagelet

- by astemkov

Introduction The goal of this exercise is to give you a basic feel of how you can use Pagelet Producer to proxy a web page We will proxy a simple static Hello World web page, cut one section out of that page and present it as a pagelet that you can later insert on your own application page or to your portal page such as WebCenter Portal space or WebCenter Interaction community page. Hello World sample app This is the static web page we will work with: Let's assume the following: The Hello World web page is running on server http://appserver.company.com:1234/ The Hello World web page path is: http://appserver.company.com:1234/helloworld/ Initial Pagelet Producer setup Let's assume that the Pagelet Producer server is running on http://pageletserver.company.com:8889/pagelets/ First let's check that Pagelet Producer is up and running. In order to do that we just need to access the following URL: http://pageletserver.company.com:8889/pagelets/ And this is what should be returned: Now you can access Pagelet Producer administration screens using this URL: http://pageletserver.company.com:8889/pagelets/admin This is how the UI looks: Now if you connect to the internet via proxy server, you need to configure proxy in Pagelet Producer settings. In the Navigator pane: Jump To - Settings Click on "Proxy" Enter your proxy server configuration: Creating a resource First thing that you need to do is to create a resource for your web page. This will tell Pagelet Producer that all sub-paths of the web page should be proxied. It also will allow you to setup common rules of how your web page should be proxied and will serve as a container for your pagelets. In the Navigator pane: Jump To - Resources Click on any existing resource (ex. welcome_resource) Click on "Create selected type" toolbar button at the top of the Navigator pane Select "Web" in the "Select Producer Type" dialog box and click "OK" Now after the resource is created let's click on "General" sub-item a specify the following values Name = AppServer Source URL = http://appserver.company.com:1234/ Destination URL = /appserver/ Click on "Save" toolbar button at the top of the Navigator pane After the resource is created our web page becomes accessible by the URL: http://pageletserver.company.com:8889/pagelets/appserver/helloworld/ So in original web page address Source URL is replaced with Pagelet Producer URL (http://pageletserver.company.com:8889/pagelets) + Destination URL Creating a pagelet Now let's create "Hello World" pagelet. Under the resource node activate Pagelets subnode Click on "Create selected type" toolbar button at the top of the Navigator pane Click on "General" sub-node of newly created pagelet and specify the following values Name = Hello_World Library = MyLib Library is used for logical grouping. The portals use the "Library" value to group pagelets in their respective UI's. For example, when adding pagelets to a WebCenter Portal space you would see the individual pagelets listed under the "Library" name. URL Suffix = helloworld/index.html this is where the Hello World page html is served from Click on "Save" toolbar button at the top of the Navigator pane The Library name can be anything you want, it doesn't have to match the resource name at all. It is used as a logical grouping of pagelets, and you can include pagelets from multiple resources into the same library or create a new library for each pagelet. After you save the pagelet you can access it here: http://pageletserver.company.com:8889/pagelets/inject/v2/pagelet/MyLib/Hello_World which is : http://pageletserver.company.com:8889/pagelets/inject/v2/pagelet/ + [Library] + [Name] Or to test the injection of a pagelet into iframe you can click on the pagelets "Documentation" sub-node and use "Access Pagelet using REST" URL: This is what we will see: Clipping The pagelet that we just created covers the whole web page, but we want just the "Hello World" segment of it. So let's clip it. Under the Hello_World pagelet node activate Clipper sub-node Click on "Create selected type" toolbar button at the top of the Navigator pane Specify a Name for newly created clipper. For example: "c1" Click on "Content" sub-node of the clipper Click on "Launch Clipper" button New browser window will open By moving a mouse pointer over the web page select the area you want to clip: Click left mouse button - the browser window will disappear and you will see that Clipping Path was automatically generated Now let's save and access the link from the "Documentation" page again Here's our pagelet nicely clipped and ready for being used on your Web Center Space

Read the article

Clustering for Mere Mortals (Pt2)

- by Geoff N. Hiten

Planning. I could stop there and let that be the entirety post #2 in this series. Planning is the single most important element in building a cluster and the Laptop Demo Cluster is no exception. One of the more awkward parts of actually creating a cluster is coordinating information between Windows Clustering and SQL Clustering. The dialog boxes show up hours apart, but still have to have matching and consistent information. Excel seems to be a good tool for tracking these settings. My workbook has four pages: Systems, Storage, Network, and Service Accounts. The systems page looks like this: Name Role Software Location East Physical Cluster Node 1 Windows Server 2008 R2 Enterprise Laptop VM West Physical Cluster Node 2 Windows Server 2008 R2 Enterprise Laptop VM North Physical Cluster Node 3 (Future Reserved) Windows Server 2008 R2 Enterprise Laptop VM MicroCluster Cluster Management Interface N/A Laptop VM SQL01 High-Performance High-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM SQL02 High-Performance Standard-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM SQL03 Standard-Performance High-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM Note that everything that has a computer name is listed here, whether physical or virtual. Storage looks like this: Storage Name Instance Purpose Volume Path Size (GB) LUN ID Speed Quorum MicroCluster Cluster Quorum Quorum Q: 2 SQL01Anchor SQL01 Instance Anchor SQL01Anchor L: 2 SQL02Anchor SQL02 Instance Anchor SQL02Anchor M: 2 SQL01Data1 SQL01 SQL Data SQL01Data1 L:\MountPoints\SQL01Data1 2 SQL02Data1 SQL02 SQL Data SQL02Data1 M:\MountPoints\SQL02Data1 Starting at the left is the name used in the storage array. It is important to rename resources at each level, whether it is Storage, LUN, Volume, or disk folder. Otherwise, troubleshooting things gets complex and difficult. You want to be able to glance at a resource at any level and see where it comes from and what it is connected to. Networking is the same way: System Network VLAN IP Subnet Mask Gateway DNS1 DNS2 East Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 East Heartbeat Cluster2 255.255.255.0 West Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 West Heartbeat Cluster2 255.255.255.0 North Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 North Heartbeat Cluster2 255.255.255.0 SQL01 Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 SQL02 Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 One hallmark of a poorly planned and implemented cluster is a bunch of "Local Network Connection #n" entries in the network settings page. That lets me know that somebody didn't care about the long-term supportabaility of the cluster. This can be critically important with Hyper-V Clusters and their high NIC counts. Final page: Instance Service Name Account Password Domain OU SQL01 SQL Server SVCSQL01 Baseline22 MicroAD Service Accounts SQL01 SQL Agent SVCSQL01 Baseline22 MicroAD Service Accounts SQL02 SQL Server SVC_SQL02 Baseline22 MicroAD Service Accounts SQL02 SQL Agent SVC_SQL02 Baseline22 MicroAD Service Accounts SQL03 (Future) SQL Server SVC_SQL03 Baseline22 MicroAD Service Accounts SQL03 (Future) SQL Agent SVC_SQL03 Baseline22 MicroAD Service Accounts Installation Account administrator Yes. I write down the account information. I secure the file via NTFS, but I don't want to fumble around looking for passwords when it comes time to rebuild a node. Always fill out the workbook COMPLETELY before installing anything. The whole point is to have everything you need at your fingertips before you begin. The install experience is so much better and more productive with this information in place.

Read the article

Unable to either locate any wireless networks nor even connect to wifi

- by Leo Chan

I'm new to Linux. I currently have installed ubuntu 12.10. I had a previous problem with my wireless card (see url to see previous problem : How to enable wireless in a Fujitsu LH532?). It now shows Connect to hidden network and create new wireless network but now unfortunately it simply cannot find any wireless connections. I did have a very thorough look around about this problem such as wait a little longer since sometimes it cannot load all the wireless connections available that quickly. My wifi is a hidden network and I have used the connect to hidden network feature but it keeps asking for my wep key which has been checked 4 times (I counted) and it still seems to not work; It keeps asking for the WEP key. I did try both WEP 40/128-bit key and WPA & WPA2 since previously on my windows it worked; My family later decided to use WEP. I only have a quick fix using a usb wireless stick and I wish to have a more solid fix. Thanks Results from sudo iwlist wlan0 scan wlan0 Scan completed : Cell 01 - Address: 00:1E:73:C8:62:BD Channel:6 Frequency:2.437 GHz (Channel 6) Quality=25/70 Signal level=-85 dBm Encryption key:on ESSID:"EnigmaHome" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000cb3bb10a5c Extra: Last beacon: 696ms ago IE: Unknown: 000A456E69676D61486F6D65 IE: Unknown: 010482848B96 IE: Unknown: 030106 IE: Unknown: 0706484B20010B1E IE: Unknown: 2A0107 IE: Unknown: 32080C1218243048606C IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00 Cell 02 - Address: C8:3A:35:34:C1:60 Channel:6 Frequency:2.437 GHz (Channel 6) Quality=22/70 Signal level=-88 dBm Encryption key:on ESSID:"Tenda" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s Mode:Master Extra:tsf=000001336e70ffdd Extra: Last beacon: 716ms ago IE: Unknown: 000554656E6461 IE: Unknown: 010882848B961224486C IE: Unknown: 030106 IE: Unknown: 32040C183060 IE: Unknown: 0706434E20010D10 IE: Unknown: 33082001020304050607 IE: Unknown: 33082105060708090A0B IE: Unknown: DD270050F204104A0001101044000101104700102880288028801880A880C83A3534C160103C000101 IE: Unknown: 050400010000 IE: Unknown: 2A0106 IE: Unknown: 2D1AEC0117FFFF0000000000000000000000000000000C0000000000 IE: Unknown: 3D1606000500000000000000000000000000000000000000 IE: Unknown: 7F0101 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Preauthentication Supported IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00 IE: Unknown: 0B05010089127A IE: Unknown: DD1E00904C33EC0117FFFF0000000000000000000000000000000C0000000000 IE: Unknown: DD1A00904C3406000500000000000000000000000000000000000000 IE: Unknown: DD07000C4304000000 Cell 03 - Address: 00:1E:73:C8:62:BF Channel:6 Frequency:2.437 GHz (Channel 6) Quality=47/70 Signal level=-63 dBm Encryption key:on ESSID:"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000cb3bac614e Extra: Last beacon: 1064ms ago IE: Unknown: 00110000000000000000000000000000000000 IE: Unknown: 010482848B96 IE: Unknown: 030106 IE: Unknown: 050C010200000000000000000000 IE: Unknown: 0706484B20010B1E IE: Unknown: 2A0107 IE: Unknown: 32080C1218243048606C IE: Unknown: DD070050F202000100

Read the article

Networking- Wireless and Wired not working

- by JJ White

So everything in Ubuntu has been working great until networking stopped working. I've spent the better part of two days scouring for a fix with no luck. Here is my info...your help would so be appreciated. grep -i eth /var/log/syslog | tail Sep 25 16:31:59 jj-laptop NetworkManager[970]: <info> (eth0): cleaning up... Sep 25 16:31:59 jj-laptop NetworkManager[970]: <info> (eth0): taking down device. Sep 25 16:31:59 jj-laptop kernel: [23403.998837] sky2 0000:02:00.0: eth0: disabling interface Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): now managed Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): bringing up device. Sep 25 16:35:54 jj-laptop kernel: [23413.629424] sky2 0000:02:00.0: eth0: enabling interface Sep 25 16:35:54 jj-laptop kernel: [23413.635703] ADDRCONF(NETDEV_UP): eth0: link is not ready Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): preparing device. Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): deactivating device (reason 'managed') [2] and then ifconfig -a eth0 Link encap:Ethernet HWaddr 00:17:42:14:e9:e1 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:4605 errors:0 dropped:0 overruns:0 frame:0 TX packets:287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:315161 (315.1 KB) TX bytes:63680 (63.6 KB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:13018 errors:0 dropped:0 overruns:0 frame:0 TX packets:13018 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:880484 (880.4 KB) TX bytes:880484 (880.4 KB) wlan0 Link encap:Ethernet HWaddr 00:13:02:d0:ee:13 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) also iwconfig lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. and of course sudo lshw -C network *-network description: Ethernet interface product: 88E8055 PCI-E Gigabit Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 12 serial: 00:17:42:14:e9:e1 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A latency=0 link=no multicast=yes port=twisted pair speed=1Gbit/s resources: irq:44 memory:f0000000-f0003fff ioport:2000(size=256) memory:c0a00000-c0a1ffff *-network DISABLED description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d0:ee:13 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.2.0-31-generic firmware=15.32.2.9 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:45 memory:c0100000-c0100fff last but not least lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 dm_crypt 22528 0 rfcomm 38139 0 parport_pc 32114 0 bnep 17830 2 ppdev 12849 0 bluetooth 158438 10 rfcomm,bnep binfmt_misc 17292 1 snd_hda_codec_idt 60251 1 pcmcia 39791 0 joydev 17393 0 snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 yenta_socket 27428 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event pcmcia_rsrc 18367 1 yenta_socket wacom_w8001 12906 0 irda 185517 0 arc4 12473 2 iwl3945 73111 0 iwl_legacy 71134 1 iwl3945 mac80211 436455 2 iwl3945,iwl_legacy cfg80211 178679 3 iwl3945,iwl_legacy,mac80211 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq dm_multipath 22710 0 pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc psmouse 96619 0 apanel 12718 0 serport 12808 1 serio_raw 13027 0 crc_ccitt 12595 1 irda mac_hid 13077 0 snd 62064 15 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_t imer,snd_seq_device input_polldev 13648 1 apanel soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm lp 17455 0 fujitsu_laptop 18504 0 parport 40930 3 parport_pc,ppdev,lp dm_raid45 76451 0 xor 25987 1 dm_raid45 dm_mirror 21822 0 dm_region_hash 16065 1 dm_mirror dm_log 18193 3 dm_raid45,dm_mirror,dm_region_hash sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci sky2 49545 0 i915 414939 3 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915

Read the article

Healthcare and Distributed Data Don't Mix

- by [email protected]

How many times have you heard the story? Hard disk goes missing, USB thumb drive goes missing, laptop goes missing...Not a week goes by that we don't hear about our data going missing... Healthcare data is a big one, but we hear about credit card data, pricing info, corporate intellectual property... When I have spoken at Security and IT conferences part of my message is "Why do you give your users data to lose in the first place?" I don't suggest they can't have access to it...in fact I work for the company that provides the premiere data security and desktop solutions that DO provide access. Access isn't the issue. 'Keeping the data' is the issue.We are all human - we all make mistakes... I fault no one for having their car stolen or that they dropped a USB thumb drive. (well, except the thieves - I can certainly find some fault there) Where I find fault is in policy (or lack thereof sometimes) that allows users to carry around private, and important, data with them. Mr. Director of IT - It is your fault, not theirs. Ms. CSO - Look in the mirror.It isn't like one can't find a network to access the data from. You are on a network right now. How many Wireless ones (wifi, mifi, cellular...) are there around you, right now? Allowing employees to remove data from the confines of (wait for it... ) THE DATA CENTER is just plain indefensible when it isn't required. The argument that the laptop had a password and the hard disk was encrypted is ridiculous. An encrypted drive tells thieves that before they sell the stolen unit for $75, they should crack the encryption and ascertain what the REAL value of the laptop is... credit card info, Identity info, pricing lists, banking transactions... a veritable treasure trove of info people give away on an 'encrypted disk'.What started this latest rant on lack of data control was an article in Government Health IT that was forwarded to me by Denny Olson, an Oracle Principal Sales Consultant in Minnesota. The full article is here, but the point was that a couple laptops went missing in a couple different cases, and.. well... no one knows where the data is, and yes - they were loaded with patient info. What were you thinking?Obviously you can't steal data form a Sun Ray appliance... since it has no data, nor any storage to keep the data on, and Secure Global Desktop allows access from Macs, Linux and Windows client devices... but in all cases, there is no keeping the data unless you explicitly allow for it in your policy. Since you can get at the data securely from any network, why would you want to take personal responsibility for it? Both Sun Rays and Secure Global Desktop are widely used in Healthcare... but clearly not widely enough.We need to do a better job of getting the message out - Healthcare (or insert your business type here) and distributed data don't mix. Then add Hot Desking and 'follow me printing' and you have something that Clinicians (and CSOs) love.Thanks for putting up my blood pressure, Denny.

Read the article

Using the SOA-BPM VIrtualBox Appliance

- by antony.reynolds

Quickstart Guide to Using Oracle Appliance for SOA/BPM Recently I have been setting up some machines for fellow engineers. My base setup consists of Oracle Enterprise Linux with Oracle Virtual Box. Note that after installing VirtualBox I needed to add the VirtualBox Extension Pack to enable RDP access amongst other features. In order to get them started quickly with some images I downloaded the pre-built appliance for SOA/BPM from OTN. Out of the box this provides a VirtualBox image that is pre-installed with everything you will need to develop SOA/BPM applications. Specifically by using the virtual appliance I got the following pre-installed and configured. Oracle Enterprise Linux 5 User oracle password oracle User root password oracle. Oracle Database XE Pre-configured with SOA/BPM repository. Set to auto-start on OS startup. Oracle SOA Suite 11g PS2 Configured with a “collapsed domain”, all services (SOA/BAM/EM) running in AdminServer. Listening on port 7001 Oracle BPM Suite 11g Configured in same domain as SOA Suite. Oracle JDeveloper 11g With SOA/BPM extensions. Networking The VM by default uses NAT (Network Address Translation) for network access. Make sure that the advanced settings for port forwarding allow access through the host to guest ports. It should be pre-configured to forward requests on the following ports Purpose Host Port Guest Port (VBox Image) SSH 2222 22 HTTP 7001 7001 Database 1521 1521 Note that only one VirtualBox image can use a given host port, so make sure you are not clashing if it seems not to work. What’s Left to Do? There is still some customization of the environment that may be required. If you need to configure a proxy server as I did then for the oracle and root users to set up an HTTP proxy Added “export http_proxy=http://proxy-host:proxy-port” to ~oracle/.bash_profile and ~root/.bash_profile Added “export http_proxy=http://proxy-host:proxy-port” to /etc/.bashrc Edited System->Preferences to set Network Proxy In Firefox set Preferences->Network->Connection Settings to “Use system proxy settings” In JDeveloper set Edit->Preferences->Web Browser and Proxy to required proxy settings You may need to configure yum to point to a public OEL yum repository – such as http://public-yum.oracle.com. If you are going to be accessing the SOA server from outside the VirtualBox image then you may want to set the soa-infra Server URLs to be the hostname of the host OS. Snap! Once I had the machine configured how I wanted to use it I took a snapshot so that I can always get back to the pristine install I have now. Snapshots are one of the big benefits of putting a development environment into a virtualized environment. I can make changes to my installation and if I mess it up I can restore the image to a last known good snapshot. Hey Presto!, Ready to Go This is the quickest way to get up and running with SOA/BPM Suite. Out of the box the download will work, I only did extra customization so I could use services outside the firewall and browse outside the firewall from within by SOA VirtualBox image. I also use yum to update the OS to the latest binaries. So have fun.

Read the article

IPgallery banks on Solaris SPARC

- by Frederic Pariente

IPgallery is a global supplier of converged legacy and Next Generation Networks (NGN) products and solutions, including: core network components and cloud-based Value Added Services (VAS) for voice, video and data sessions. IPgallery enables network operators and service providers to offer advanced converged voice, chat, video/content services and rich unified social communications in a combined legacy (fixed/mobile), Over-the-Top (OTT) and Social Community (SC) environments for home and business customers. Technically speaking, this offer is a scalable and robust telco solution enabling operators to offer new services while controlling operating expenses (OPEX). In its solutions, IPgallery leverages the following Oracle components: Oracle Solaris, Netra T4 and SPARC T4 in order to provide a competitive and scalable solution without the price tag often associated with high-end systems. Oracle Solaris Binary Application Guarantee A unique feature of Oracle Solaris is the guaranteed binary compatibility between releases of the Solaris OS. That means, if a binary application runs on Solaris 2.6 or later, it will run on the latest release of Oracle Solaris. IPgallery developed their application on Solaris 9 and Solaris 10 then runs it on Solaris 11, without any code modification or rebuild. The Solaris Binary Application Guarantee helps IPgallery protect their long-term investment in the development, training and maintenance of their applications. Oracle Solaris Image Packaging System (IPS) IPS is a new repository-based package management system that comes with Oracle Solaris 11. It provides a framework for complete software life-cycle management such as installation, upgrade and removal of software packages. IPgallery leverages this new packaging system in order to speed up and simplify software installation for the R&D and production environments. Notably, they use IPS to deliver Solaris Studio 12.3 packages as part of the rapid installation process of R&D environments, and during the production software deployment phase, they ensure software package integrity using the built-in verification feature. Solaris IPS thus improves IPgallery's time-to-market with a faster, more reliable software installation and deployment in production environments. Extreme Network Performance IPgallery saw a huge improvement in application performance both in CPU and I/O, when running on SPARC T4 architecture in compared to UltraSPARC T2 servers. The same application (with the same activation environment) running on T2 consumes 40%-50% CPU, while it consumes only 10% of the CPU on T4. The testing environment comprised of: Softswitch (Call management), TappS (Telecom Application Server) and Billing Server running on same machine and initiating various services in capacity of 1000 CAPS (Call Attempts Per Second). In addition, tests showed a huge improvement in the performance of the TCP/IP stack, which reduces network layer processing and in the end Call Attempts latency. Finally, there is a huge improvement within the file system and disk I/O operations; they ran all tests with maximum logging capability and it didn't influence any benchmark values. "Due to the huge improvements in performance and capacity using the T4-1 architecture, IPgallery has engineered the solution with less hardware. This means instead of deploying the solution on six T2-based machines, we will deploy on 2 redundant machines while utilizing Oracle Solaris Zones and Oracle VM for higher availability and virtualization" Shimon Lichter, VP R&D, IPgallery In conclusion, using the unique combination of Oracle Solaris and SPARC technologies, IPgallery is able to offer solutions with much lower TCO, while providing a higher level of service capacity, scalability and resiliency. This low-OPEX solution enables the operator, the end-customer, to deliver a high quality service while maintaining high profitability.

Read the article

General Availability of Oracle E-Business Suite Plug-in 12.1.0.1.0

- by user810030

We are pleased to announce the General Availability of Oracle E-Business Suite Plug-in 12.1.0.1.0, an integral part of Application Management Suite for Oracle E-Business Suite. The combination of Enterprise Manager 12c Cloud Control and the Application Management Suite combines functionality that was available in the standalone Application Management Pack for Oracle E-Business Suite and Application Change Management Pack for Oracle E-Business Suite with Oracle’s Real User Experience Insight product and the Configuration & Compliance capabilities to provide the most complete solution for managing Oracle E-Business Suite applications. The features that were available in the standalone management packs are now packaged into the Oracle E-Business Suite Plug-in, which is now fully certified with Oracle Enterprise Manager 12c Cloud Control. This latest plug-in extends Cloud Control with E-Business Suite specific system management capabilities and features enhanced change management support. This new release offers the following key enhancements: General: Oracle Enterprise Manager 12c Base Platform uptake: All components of the management suite are certified with Oracle Enterprise Manager 12c Cloud Control. Security: Privilege Delegation: The Oracle E-Business Suite Plug-in now extends Enterprise Manager’s privilege delegation through Sudo and PowerBroker to Oracle E-Business Suite Plug-in host targets. Privileges and Roles for Managing Oracle E-Business Suite: This release includes new ready-to-use target and resource privileges to monitor, manage, and perform Change Management functionality. Cloning: Named Credentials Uptake in Cloning: The Clone module transactions now let users leverage the Named Credential feature introduced in Enterprise Manager 12c, thereby passing all the benefits of Named Credentials features in Enterprise Manager to the Oracle E-Business Suite Plug-in users. Smart Clone improvements: The new and improved Smart Clone UI supports the adding of "pre and post" custom steps to a copy of the ready-to-use cloning deployment procedure. Now a user can pass parameters to the custom steps through the interview screen of the UI as well as pass ready-to-use parameters to the custom steps. Change Management Enhancements Application Management Suite for Oracle E-Business Suite provides a centralized view to monitor and orchestrate changes (both functional and technical) across multiple Oracle E-Business Suite systems. In this latest release, it provides even more control and flexibility in managing Oracle E-Business Suite changes. Customization Manager: Support for longer file names: Customization Manager now handles file names up to thirty characters in length. Patch Manager: Queuing of Patch Manager Runs: This feature allows patch runs to queue up if Patch Manager detects a specific target is in a blackout state. Multi-node system patching: The patch run interview has been enhanced to allow Enterprise Manager Administrator to choose which nodes adpatch will run on. New AD Administration Options: The patch run interview has been extended to include AD Administration Options "Relink Application Programs", "Generate Product Jars Files", "Generate Report Files", and "Generate Form Files". Release Technical Details Product documentation for the plug-in is available on My Oracle Support as note 1434392.1. The Oracle E-Business Suite Plug-in can be accessed in one of the following ways: Fresh install Enterprise Manager Store Oracle Software Delivery Cloud Upgrades Oracle Technology Network Please refer to the Application Management Pack for Oracle E-Business Suite Guide for further details. Related Software Component Oracle Real User Experience Insight 12.1.0.0.1 Product documentation is available on Oracle Technology Network in the "Oracle Enterprise Manager 12c Release 1 (12.1) Documentation" set under the "Associated Document" tab. (http://docs.oracle.com/cd/E26370_01/index.htm) Product may be downloaded individually from Oracle Technology Network software download page for Oracle Enterprise Manager under "Additional Enterprise Manager Downloads." (http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html) Product may also be downloaded individually from the Oracle Software Delivery Cloud. Select "Oracle Enterprise Manager" product pack, "Oracle Real User Experience Insight 12c Release 1 Media Pack for x8 Collateral Can be accessed on the Application Management Page on Oracle Technology Network

Read the article

Atheros AR9485 wireless card doesn't work in an ASUS K53E

- by John

I just installed Ubuntu 11.10 32-bit version in dual boot mode on an ASUS K53. Every thing seems to work fine except for the wireless. The wireless works on Windows 7. Ubuntu finds the wireless card, but it does not appear to be turned on. The only physical means of turning on the card is the FN-F2 key combo. That works on Windows, but not in Ubuntu. I've looked in the forums for a solution and I'm not quite sure what to do. I've gathered the following information: jdwbmc@Spatha:~$ cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10" Linux Spatha 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 i686 i386 GNU/Linux jdwbmc@Spatha:~$ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) Subsystem: AzureWave Device [1a3b:1186] Kernel driver in use: ath9k -- 04:00.0 Ethernet controller [0200]: Atheros Communications AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) Subsystem: ASUSTeK Computer Inc. Device [1043:1851] Kernel driver in use: atl1c jdwbmc@Spatha:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 058f:a014 Alcor Micro Corp. jdwbmc@Spatha:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thrff Fragment thrff Power Managementff jdwbmc@Spatha:~$ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no jdwbmc@Spatha:~$ lsmod Module Size Used by parport_pc 32114 0 ppdev 12849 0 snd_hda_codec_hdmi 31426 1 bnep 17923 2 rfcomm 38408 0 bluetooth 148839 10 bnep,rfcomm snd_hda_codec_realtek 254125 1 binfmt_misc 17292 1 joydev 17393 0 asus_nb_wmi 12469 0 asus_wmi 19333 1 asus_nb_wmi sparse_keymap 13658 1 asus_wmi uvcvideo 67271 0 videodev 85626 1 uvcvideo snd_hda_intel 24262 2 snd_hda_codec 91754 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80468 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 wmi 18744 1 asus_wmi snd_rawmidi 25241 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event arc4 12473 2 i915 505108 3 snd_timer 28932 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq ath9k 112711 0 psmouse 73673 0 serio_raw 12990 0 mac80211 272785 1 ath9k drm_kms_helper 32889 1 i915 ath9k_common 13599 1 ath9k drm 192226 4 i915,drm_kms_helper ath9k_hw 293893 2 ath9k,ath9k_common ath 19387 2 ath9k,ath9k_hw cfg80211 172392 3 ath9k,mac80211,ath snd 55902 14 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,s nd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm mei 36466 0 i2c_algo_bit 13199 1 i915 video 18908 1 i915 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp ahci 21634 3 libahci 25727 1 ahci atl1c 36638 0 xhci_hcd 72915 0 jdwbmc@Spatha:/var/lib/NetworkManager$ cat NetworkManager.state [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true jdwbmc@Spatha:~$ lspci -nn | grep 0280 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) Any help would be appreciated. Thanks.

Read the article

Creating a new naming context in OUD

- by Sylvain Duloutre

A naming context (also known as a directory suffix) is a DN that identifies the top entry in a locally held directory hierarchy. A new naming context can be created using ODSM, the OUD gui admin console, as described in http://docs.oracle.com/cd/E29407_01/admin.111200/e22648/server_config.htm#CBDGCJGF It can also be created using the dsconfig command lione as described below: Creation of a new naming context consists in 3 steps: First create a Local Backend Workflow element (myNewDb in this exemple) , responsible for the naming context base dn, e.g o=example. dsconfig create-workflow-element \ --set base-dn:o=example \ --set enabled:true \ --type db-local-backend \ --element-name myNewDb \ --hostname <your host> \ --port <admin port> \ --bindDN cn=Directory\ Manager \ --bindPasswordFile ****** \ --no-prompt Second, create a Workflow element (workFlowForMyNewDb in this exemple) associated with the Local Backend Workflow element. WorkFlow elements are used to route LDAP requests to the appropriate database, based on the target base dn. dsconfig create-workflow \ --set base-dn:o=example \ --set enabled:true \ --set workflow-element:myNewDb \ --type generic \ --workflow-name workFlowForMyNewDb \ --hostname <your host name> \ --port <admin port>\ --bindDN cn=Directory\ Manager \ --bindPasswordFile ****** \ --no-prompt Then, the workflow element must be made visible outside of the directory, i.e added to the internal "routing table". This is done by adding the Workflow to the appropriate Network Group. A Network group is used to classify incoming client connections and route requests to workflows. dsconfig set-network-group-prop \ --group-name network-group \ --add workflow:workFlowForMyNewDb \ --hostname <your hostname> \ --port <admin port>\ --bindDN cn=Directory\ Manager \ --bindPasswordFile ****** \ --no-prompt At that stage, it is possible to import entries to the new naming context o=example.

Read the article

EPM 11.1.2.2 Architecture: Financial Performance Management Applications

- by Marc Schumacher

Financial Management can be accessed either by a browser based client or by SmartView. Starting from release 11.1.2.2, the Financial Management Windows client does not longer access the Financial Management Consolidation server. All tasks that require an on line connection (e.g. load and extract tasks) can only be done using the web interface. Any client connection initiated by a browser or SmartView is send to the Oracle HTTP server (OHS) first. Based on the path given (e.g. hfmadf, hfmofficeprovider) in the URL, OHS makes a decision to forward this request either to the new Financial Management web application based on the Oracle Application Development Framework (ADF) or to the .NET based application serving SmartView retrievals running on Internet Information Server (IIS). Any requests send to the ADF web interface that need to be processed by the Financial Management application server are send to the IIS using HTTP protocol and will be forwarded further using DCOM to the Financial Management application server. SmartView requests, which are processes by IIS in first row, are forwarded to the Financial Management application server using DCOM as well. The Financial Management Application Server uses OLE DB database connections via native database clients to talk to the Financial Management database schema. Communication between the Financial Management DME Listener, which handles requests from EPMA, and the Financial Management application server is based on DCOM. Unlike most other components Essbase Analytics Link (EAL) does not have an end user interface. The only user interface is a plug-in for the Essbase Administration Services console, which is used for administration purposes only. End users interact with a Transparent or Replicated Partition that is created in Essbase and populated with data by EAL. The Analytics Link Server deployed on WebLogic communicates through HTTP protocol with the Analytics Link Financial Management Connector that is deployed in IIS on the Financial Management web server. Analytics Link Server interacts with the Data Synchronisation server using the EAL API. The Data Synchronization server acts as a target of a Transparent or Replicated Partition in Essbase and uses a native database client to connect to the Financial Management database. Analytics Link Server uses JDBC to connect to relational repository databases and Essbase JAPI to connect to Essbase. As most Oracle EPM System products, browser based clients and SmartView can be used to access Planning. The Java based Planning web application is deployed on WebLogic, which is configured behind an Oracle HTTP Server (OHS). Communication between Planning and the Planning RMI Registry Service is done using Java Remote Message Invocation (RMI). Planning uses JDBC to access relational repository databases and talks to Essbase using the CAPI. Be aware of the fact that beside the Planning System database a dedicated database schema is needed for each application that is set up within Planning. As Planning, Profitability and Cost Management (HPCM) has a pretty simple architecture. Beside the browser based clients and SmartView, a web service consumer can be used as a client too. All clients access the Java based web application deployed on WebLogic through Oracle HHTP Server (OHS). Communication between Profitability and Cost Management and EPMA Web Server is done using HTTP protocol. JDBC is used to access the relational repository databases as well as data sources. Essbase JAPI is utilized to talk to Essbase. For Strategic Finance, two clients exist, SmartView and a Windows client. While SmartView communicates through the web layer to the Strategic Finance Server, Strategic Finance Windows client makes a direct connection to the Strategic Finance Server using RPC calls. Connections from Strategic Finance Web as well as from Strategic Finance Web Services to the Strategic Finance Server are made using RPC calls too. The Strategic Finance Server uses its own file based data store. JDBC is used to connect to the EPM System Registry from web and application layer. Disclosure Management has three kinds of clients. While the browser based client and SmartView interact with the Disclosure Management web application directly through Oracle HTTP Server (OHS), Taxonomy Designer does not connect to the Disclosure Management server. Communication to relational repository databases is done via JDBC, to connect to Essbase the Essbase JAPI is utilized.

Read the article

Security and the Mobile Workforce

- by tobyehatch

Now that many organizations are moving to the BYOD philosophy (bring your own devices), security for phones and tablets accessing company sensitive information is of paramount importance. I had the pleasure to interview Brian MacDonald, Principal Product Manager for Oracle Business Intelligence (BI) Mobile Products, about this subject, and he shared some wonderful insight about how the Oracle Mobile Security Tool Kit is addressing mobile security and doing some pretty cool things. With the rapid proliferation of phones and tablets, there is a perception that mobile devices are a security threat to corporate IT, that mobile operating systems are not secure, and that there are simply too many ways to inadvertently provide access to critical analytic data outside the firewall. Every day, I see employees working on mobile devices at the airport, while waiting for their airplanes, and using public WIFI connections at coffee houses and in restaurants. These methods are not typically secure ways to access confidential company data. I asked Brian to explain why. “The native controls for mobile devices and applications are indeed insufficiently secure for corporate deployments of Business Intelligence and most certainly for businesses where data is extremely critical - such as financial services or defense - although it really applies across the board. The traditional approach for accessing data from outside a firewall is using a VPN connection which is not a viable solution for mobile. The problem is that once you open up a VPN connection on your phone or tablet, you are creating an opening for the whole device, for all the software and installed applications. Often the VPN connection by itself provides insufficient encryption – if any – which means that data can be potentially intercepted.” For this reason, most organizations that deploy Business Intelligence data via mobile devices will only do so with some additional level of control. So, how has the industry responded? What are companies doing to address this very real threat? Brian explained that “Mobile Device Management (MDM) and Mobile Application Management (MAM) software vendors have rapidly created solutions for mobile devices that provide a vast array of services for controlling, managing and establishing enterprise mobile usage policies. On the device front, vendors now support full levels of encryption behind the firewall, encrypted local data storage, credential management such as federated single-sign-on as well as remote wipe, geo-fencing and other risk reducing features (should a device be lost or stolen). More importantly, these software vendors have created methods for providing these capabilities on a per application basis, allowing for complete isolation of the application from the mobile operating system. Finally, there are tools which allow the applications themselves to be distributed through enterprise application stores allowing IT organizations to manage who has access to the apps, when updates to the applications will happen, and revoke access after an employee leaves. So even though an employee may be using a personal device, access to company data can be controlled while on or near the company premises. So do the Oracle BI mobile products integrate with the MDM and MAM vendors? Brian explained that our customers use a wide variety of mobile security vendors and may even have more than one in-house. Therefore, Oracle is ensuring that users have a choice and a mechanism for linking together Oracle’s BI offering with their chosen vendor’s secure technology. The Oracle BI Mobile Security Toolkit, which is a version of the Oracle BI Mobile HD application, delivered through the Oracle Technology Network (OTN) in its component parts, helps Oracle users to build their own version of the Mobile HD application, sign it with their own enterprise development certificates, link with their security vendor of choice, then deploy the combined application through whichever means they feel most appropriate, including enterprise application stores. Brian further explained that Oracle currently supports most of the major mobile security vendors, has close relationships with each, and maintains strong partnerships enabling both Oracle and the vendors to test, update and release a cooperating solution in lock-step. Oracle also ensures that as new versions of the Oracle HD application are made available on the Apple iTunes store, the same version is also immediately made available through the Security Toolkit on OTN. Rest assured that as our workforce continues down the mobile path, company sensitive information can be secured. To listen to the entire podcast, click here. To learn more about the Oracle BI Mobile HD, click here To learn more about the BI Mobile Security Toolkit, click here

Read the article

Need help partitioning when reinstalling Ubuntu 14.04

- by Chris M.

I upgraded to 14.04 about a month ago on my HP Mini netbook (about 16 GB hard disk). A few days ago the system crashed (I don't know why but I was using internet at the time). When I restarted the computer, Ubuntu would not load. Instead, I got a message from the BIOS saying Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key I took this to mean that I needed to reinstall 14.04. When I try to reinstall Ubuntu from the USB stick, I choose "Erase disk and install Ubuntu" but then I get a message: Some of the partitions you created are too small. Please make the following partitions at least this large: / 3.3 GB If you do not go back to the partitioner and increase the size of these partitions, the installation may fail. At first I hit Continue to see if it would install anyway, and it gave the message: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition # 1 (sda) at / failed. You may resume partitioning from the partitioning menu. The second time I hit Go Back, and it took me to the following partitioning table: Device Type Mount Point Format Size Used System /dev/sda /dev/sda1 ext4 (checked) 3228 MB Unknown /dev/sda5 swap (not checked) 1063 MB Unknown + - Change New Partition Table... Revert Device for boot loader installation: /dev/sda ATA JM Loader 001 (4.3 GB) At this point I'm not sure what to do. I've never partitioned my hard drive before and I don't want to screw things up. (I'm not particularly tech savvy.) Can you instruct me what I should do. (P.S. I'm afraid the table might not appear as I typed it in.) Results from fdisk: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 7860 MB, 7860125696 bytes 155 heads, 31 sectors/track, 3194 cylinders, total 15351808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009a565 Device Boot Start End Blocks Id System /dev/sdb1 * 2768 15351807 7674520 b W95 FAT32 ubuntu@ubuntu:~$ Here is what it displays when I open the Disks utility (I tried the screenshot terminal command you suggested but it didn't seem to do anything): 4.3 GB Hard Disk /dev/sda Model: JM Loader 001 (01000001) Size: 4.3 GB (4,294,967,296 bytes) Serial Number: 01234123412341234 Assessment: SMART is not supported Volumes Size: 4.3 GB (4,294,967,296 bytes) Device: /dev/sda Contents: Unknown (There is a button in the utility that when you click it gives the following options: Format... Create Disk Image... Restore Disk Image... Benchmark but SMART Data & Self-Tests... is dimmed out) When I hit F9 Change Boot Device Order, it shows the hard drive as: SATA:PM-JM Loader 001 When I hit F10 to get me into the BIOS Setup Utility, under Diagnostic it shows: Primary Hard Disk Self Test Not Support NetworkManager Tool State: disconnected Device: eth0 Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 00:26:55:B0:7F:0C Capabilities: Carrier Detect: yes Wired Properties Carrier: off When I run command lshw -C network, I get: WARNING: you should run this program as super-user. *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:16 memory:feafc000-feafffff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: c0 serial: 00:26:55:b0:7f:0c capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:febc0000-febfffff ioport:ec80(size=128) WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

Read the article

Upgraded to 12.04 now wifi doesn't work

- by Benito Kestelman

My laptop's wifi stopped working when I upgraded to Ubuntu 12.04 (wired works). I just reinstalled 12.04 over my old 12.04 on which wifi didn't work either in an attempt to restore any settings I may have accidentally changed, but it still doesn't work. I also used a wired connection to install updates in case this bug has been fixed, but it has not. Here is the result of sudo lshw -class network: *-network description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 67 serial: 40:25:c2:5f:5b:f4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-29-generic-pae firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:51 memory:de800000-de801fff *-network description: Ethernet interface product: AR8151 v2.0 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 14:da:e9:c0:da:78 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:54 memory:dd400000-dd43ffff ioport:a000(size=128) Here is rfkill list all: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-wimax: WiMAX Soft blocked: no Hard blocked: no lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 8087:07d6 Intel Corp. Bus 001 Device 004: ID 13d3:5710 IMC Networks Bus 002 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 003 Device 003: ID 0781:5530 SanDisk Corp. Cruzer lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67) 03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 04:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0)

Read the article

MVC Communication Pattern

- by Kedu

This is kind of a follow up question to this http://stackoverflow.com/questions/23743285/model-view-controller-and-callbacks, but I wanted to post it separately, because its kind of a different topic. I'm working on a multiplayer cardgame for the Android platform. I split the project into MVC which fits the needs pretty good, but I'm currently stuck because I can't figure out a good way to communicate between the different parts. I have everything setup and working with the controller being a big state machine, which is called over and over from the gameloop, and calls getter methods from the GUI and the android/network part to get the input. The input itself in the GUI and network is set by inputlisteners that set a local variable which I read in the getter method. So far so good, this is working. But my problem is, the controller has to check every input separately,so if I want to add an input I have to check in which states its valid and call the getter method from all these states. This is not good, and lets the code look pretty ugly, makes additions uncomfortable and adds redundance. So what I've got from the question I mentioned above is that some kind of command or event pattern will fit my needs. What I want to do is to create a shared and threadsafe queue in the controller and instead of calling all these getter methods, I just check the queue for new input and proceed it. On the other side, the GUI and network don't have all these getters, but instead create an event or command and send it to the controller through, for example, observer/observable. Now my problem: I can't figure out a way, for these commands/events to fit a common interface (which the queue can store) and still transport different kind of data (button clicks, cards that are played, the player id the command comes from, synchronization data etc.). If I design the communication as command pattern, I have to stick all the information that is needed to execute the command into it when its created, that's impossible because the GUI or network has no knowledge of all the things the controller needs to execute stuff that needs to be done when for example a card is played. I thought about getting this stuff into the command when executing it. But over all the different commands I have, I would need all the information the controller has, and thus give the command a reference to the controller which would make everything in it public, which is real bad design I guess. So, I could try some kind of event pattern. I have to transport data in the event. So, like the command, I would have an interface, which all events have in common, and can be stored in the shared queue. I could create a big enum with all the different events that a are possible, save one of these enums in the actual event, and build a big switch case for the events, to proceed different stuff for different events. The problem here: I have different data for all the events. But I need a common interface, to store the events in a queue. How do I get the specific data, if I can only access the event through the interface? Even if that wouldn't be a problem, I'm creating another big switch case, which looks ugly, and when i want to add a new event, I have to create the event itself, the case, the enum, and the method that's called with the data. I could of course check the event with the enum and cast it to its type, so I can call event type specific methods that give me the data I need, but that looks like bad design too.

Read the article

Patterns for a tree of persistent data with multiple storage options?

- by Robin Winslow

I have a real-world problem which I'll try to abstract into an illustrative example. So imagine I have data objects in a tree, where parent objects can access children, and children can access parents: // Interfaces interface IParent<TChild> { List<TChild> Children; } interface IChild<TParent> { TParent Parent; } // Classes class Top : IParent<Middle> {} class Middle : IParent<Bottom>, IChild<Top> {} class Bottom : IChild<Middle> {} // Usage var top = new Top(); var middles = top.Children; // List<Middle> foreach (var middle in middles) { var bottoms = middle.Children; // List<Bottom> foreach (var bottom in bottoms) { var middle = bottom.Parent; // Access the parent var top = middle.Parent; // Access the grandparent } } All three data objects have properties that are persisted in two data stores (e.g. a database and a web service), and they need to reflect and synchronise with the stores. Some objects only request from the web service, some only write to it. Data Mapper My favourite pattern for data access is Data Mapper, because it completely separates the data objects themselves from the communication with the data store: class TopMapper { public Top FetchById(int id) { var top = new Top(DataStore.TopDataById(id)); top.Children = MiddleMapper.FetchForTop(Top); return Top; } } class MiddleMapper { public Middle FetchById(int id) { var middle = new Middle(DataStore.MiddleDataById(id)); middle.Parent = TopMapper.FetchForMiddle(middle); middle.Children = BottomMapper.FetchForMiddle(bottom); return middle; } } This way I can have one mapper per data store, and build the object from the mapper I want, and then save it back using the mapper I want. There is a circular reference here, but I guess that's not a problem because most languages can just store memory references to the objects, so there won't actually be infinite data. The problem with this is that every time I want to construct a new Top, Middle or Bottom, it needs to build the entire object tree within that object's Parent or Children property, with all the data store requests and memory usage that that entails. And in real life my tree is much bigger than the one represented here, so that's a problem. Requests in the object In this the objects request their Parents and Children themselves: class Middle { private List<Bottom> _children = null; // cache public List<Bottom> Children { get { _children = _children ?? BottomMapper.FetchForMiddle(this); return _children; } set { BottomMapper.UpdateForMiddle(this, value); _children = value; } } } I think this is an example of the repository pattern. Is that correct? This solution seems neat - the data only gets requested from the data store when you need it, and thereafter it's stored in the object if you want to request it again, avoiding a further request. However, I have two different data sources. There's a database, but there's also a web service, and I need to be able to create an object from the web service and save it back to the database and then request it again from the database and update the web service. This also makes me uneasy because the data objects themselves are no longer ignorant of the data source. We've introduced a new dependency, not to mention a circular dependency, making it harder to test. And the objects now mask their communication with the database. Other solutions Are there any other solutions which could take care of the multiple stores problem but also mean that I don't need to build / request all the data every time?

Read the article

Multiple Zend application code organisation

- by user966936

For the past year I have been working on a series of applications all based on the Zend framework and centered on a complex business logic that all applications must have access to even if they don't use all (easier than having multiple library folders for each application as they are all linked together with a common center). Without going into much detail about what the project is specifically about, I am looking for some input (as I am working on the project alone) on how I have "grouped" my code. I have tried to split it all up in such a way that it removes dependencies as much as possible. I'm trying to keep it as decoupled as I logically can, so in 12 months time when my time is up anyone else coming in can have no problem extending on what I have produced. Example structure: applicationStorage\ (contains all applications and associated data) applicationStorage\Applications\ (contains the applications themselves) applicationStorage\Applications\external\ (application grouping folder) (contains all external customer access applications) applicationStorage\Applications\external\site\ (main external customer access application) applicationStorage\Applications\external\site\Modules\ applicationStorage\Applications\external\site\Config\ applicationStorage\Applications\external\site\Layouts\ applicationStorage\Applications\external\site\ZendExtended\ (contains extended Zend classes specific to this application example: ZendExtended_Controller_Action extends zend_controller_Action ) applicationStorage\Applications\external\mobile\ (mobile external customer access application different workflow limited capabilities compared to full site version) applicationStorage\Applications\internal\ (application grouping folder) (contains all internal company applications) applicationStorage\Applications\internal\site\ (main internal application) applicationStorage\Applications\internal\mobile\ (mobile access has different flow and limited abilities compared to main site version) applicationStorage\Tests\ (contains PHP unit tests) applicationStorage\Library\ applicationStorage\Library\Service\ (contains all business logic, services and servicelocator; these are completely decoupled from Zend framework and rely on models' interfaces) applicationStorage\Library\Zend\ (Zend framework) applicationStorage\Library\Models\ (doesn't know services but is linked to Zend framework for DB operations; contains model interfaces and model datamappers for all business objects; examples include Iorder/IorderMapper, Iworksheet/IWorksheetMapper, Icustomer/IcustomerMapper) (Note: the Modules, Config, Layouts and ZendExtended folders are duplicated in each application folder; but i have omitted them as they are not required for my purposes.) For the library this contains all "universal" code. The Zend framework is at the heart of all applications, but I wanted my business logic to be Zend-framework-independent. All model and mapper interfaces have no public references to Zend_Db but actually wrap around it in private. So my hope is that in the future I will be able to rewrite the mappers and dbtables (containing a Models_DbTable_Abstract that extends Zend_Db_Table_Abstract) in order to decouple my business logic from the Zend framework if I want to move my business logic (services) to a non-Zend framework environment (maybe some other PHP framework). Using a serviceLocator and registering the required services within the bootstrap of each application, I can use different versions of the same service depending on the request and which application is being accessed. Example: all external applications will have a service_auth_External implementing service_auth_Interface registered. Same with internal aplications with Service_Auth_Internal implementing service_auth_Interface Service_Locator::getService('Auth'). I'm concerned I may be missing some possible problems with this. One I'm half-thinking about is a config.ini file for all externals, then a separate application config.ini overriding or adding to the global external config.ini. If anyone has any suggestions I would be greatly appreciative. I have used contextswitching for AJAX functions within the individual applications, but there is a big chance both external and internal will get web services created for them. Again, these will be separated due to authorization and different available services. \applicationstorage\Applications\internal\webservice \applicationstorage\Applications\external\webservice

Read the article

11gR2 RAC ASM????

- by Liu Maclean(???)

11gR2 RAC?ocr?votedisk???????ASM??, ????10g??????2?RAC????????????, ?? 11gR2 ?ASM?spfile??????ASM diskgroup???????ASM??????? ????????????,????? ASM?????mount diskgroup??????diskgroup????, ??ASM??????ASM spfile????????,?2???????? ????T.askmaclean.com?????ASM?????: hello maclean, ??spfile??ASMCMD> spget+CRSDG/rac/asmparameterfile/registry.253.787925627?????,ASM ?????ORACLE instance,?????????????diskgroup,????????????????????????????thanks.! ?????????: ?11.2??Oracle Cluterware??voting disk files?????????11.1?10.2????,11.2??voting disk file??????OCR?, ?????11.2??ocr?votedisk?????ASM? , ???11.2?voting disk file??GPNP profile??CSS voting file discovery string???? CSS voting disk file?discovery string???ASM,??????ASM discovery string??? ????????udev???????ASM???LUN, ??udev????????/dev/rasm-disk* , ????gpnptool get????gpnp profile: [grid@maclean1 trace]$ gpnptool get Warning: some command line parameters were defaulted. Resulting command line: /g01/grid/app/11.2.0/grid/bin/gpnptool.bin get -o- <?xml version="1.0" encoding="UTF-8"?><gpnp:GPnP-Profile Version="1.0" xmlns="http://www.grid-pnp.org/2005/11/gpnp-profile" xmlns:gpnp="http://www.grid-pnp.org/2005/11/gpnp-profile" xmlns:orcl="http://www.oracle.com/gpnp/2005/11/gpnp-profile" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.grid-pnp.org/2005/11/gpnp-profile gpnp-profile.xsd" ProfileSequence="9" ClusterUId="452185be9cd14ff4ffdc7688ec5439bf" ClusterName="maclean-cluster" PALocation=""><gpnp:Network-Profile><gpnp:HostNetwork id="gen" HostName="*"><gpnp:Network id="net1" IP="192.168.1.0" Adapter="eth0" Use="public"/><gpnp:Network id="net2" IP="172.168.1.0" Adapter="eth1" Use="cluster_interconnect"/></gpnp:HostNetwork></gpnp:Network-Profile>< orcl:CSS-Profile id="css" DiscoveryString="+asm" LeaseDuration="400"/><orcl:ASM-Profile id="asm" DiscoveryString="/dev/rasm*" SPFile="+SYSTEMDG/maclean-cluster/asmparameterfile/registry.253.788682933"/>< ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#"><ds:SignedInfo><ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/><ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/><ds:Reference URI=""><ds:Transforms><ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature"/><ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"> <InclusiveNamespaces xmlns="http://www.w3.org/2001/10/xml-exc-c14n#" PrefixList="gpnp orcl xsi"/></ds:Transform></ds:Transforms>< ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/><ds:DigestValue>L1SLg10AqGEauCQ4ne9quucITZA=</ds:DigestValue>< /ds:Reference></ds:SignedInfo><ds:SignatureValue>rTyZm9vfcQCMuian6isnAThUmsV4xPoK2fteMc1l0GIvRvHncMwLQzPM/QrXCGGTCEvgvXzUPEKzmdX2oy5vLcztN60UHr6AJtA2JYYodmrsFwEyVBQ1D6wH+HQiOe2SG9UzdQnNtWSbjD4jfZkeQWyMPfWdKm071Ek0Rfb4nxE=</ds:SignatureValue></ds:Signature></gpnp:GPnP-Profile> Success. ?????2???: <orcl:CSS-Profile id=”css” DiscoveryString=”+asm” LeaseDuration=”400?/>==»css voting disk??+ASM<orcl:ASM-Profile id=”asm” DiscoveryString=”/dev/rasm*” SPFile=”+SYSTEMDG/maclean-cluster/asmparameterfile/registry.253.788682933?/>==»??????ASM?DiscoveryString=”/dev/rasm*”,?ASM??????????????,SPFILE???ASM Parameter FILE?ALIAS ???????GPNP???ASM Parameter FILE?ALIAS,?????ASM???????SPFILE,???Diskgroup?Mount???????ASM ALIAS?????? ??????+SYSTEMDG/maclean-cluster/asmparameterfile/registry.253.788682933??SPFILE?ASM??????: [grid@maclean1 wallets]$ sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Tue Jul 17 05:45:35 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> set linesize 140 pagesize 1400 col "FILE NAME" format a40 set head on select NAME "FILE NAME", AU_KFFXP "AU NUMBER", NUMBER_KFFXP "FILE NUMBER", DISK_KFFXP "DISK NUMBER" from x$kffxp, v$asm_alias where GROUP_KFFXP = GROUP_NUMBER and NUMBER_KFFXP = FILE_NUMBER and name in ('REGISTRY.253.788682933') order by DISK_KFFXP,AU_KFFXP; FILE NAME AU NUMBER FILE NUMBER DISK NUMBER ---------------------------------------- ---------- ----------- ----------- REGISTRY.253.788682933 39 253 1 REGISTRY.253.788682933 35 253 3 REGISTRY.253.788682933 35 253 4 SQL> col path for a50 SQL> select disk_number,path from v$asm_disk where disk_number in (1,3,4) and GROUP_NUMBER=3; DISK_NUMBER PATH ----------- -------------------------------------------------- 3 /dev/rasm-diske 4 /dev/rasm-diskf 1 /dev/rasm-diskc ?????ASM SPFILE??????(redundancy=high),????? /dev/rasm-diskc?AU=39?/dev/rasm-diske AU=35?/dev/rasm-diskf AU=35? ????kfed?????????ASM DISK?header: [grid@maclean1 wallets]$ kfed read /dev/rasm-diske|grep spfile kfdhdb.spfile: 35 ; 0x0f4: 0x00000023 [grid@maclean1 wallets]$ kfed read /dev/rasm-diskc|grep spfile kfdhdb.spfile: 39 ; 0x0f4: 0x00000027 [grid@maclean1 wallets]$ kfed read /dev/rasm-diskf|grep spfile kfdhdb.spfile: 35 ; 0x0f4: 0x00000023 ????ASM disk header?kfdhdb.spfile??ASM SPFILE???DISK??AU NUMBER????, ASM???????????GPNP PROFILE?? DiscoveryString?????????,????ASM disk header?????kfdhdb.spfile??????,?????MOUNT DISKGROUP??????ASM SPFILE,?????ASM, ?????????????????

Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 524/1834 | < Previous Page | 520 521 522 523 524 525 526 527 528 529 530 531 | Next Page >

- by user1471995

- by mcdwight6

- by Jguy

- by Mysticgeek

- by Mysticgeek

- by pinaldave

- by Asian Angel

- by astemkov

- by Geoff N. Hiten

- by Leo Chan

- by JJ White

- by [email protected]

- by antony.reynolds

- by Frederic Pariente

- by user810030

- by John

- by Sylvain Duloutre

- by Marc Schumacher

- by tobyehatch

- by Chris M.

- by Benito Kestelman

- by Kedu

- by Robin Winslow

- by user966936

- by Liu Maclean(???)

< Previous Page | 520 521 522 523 524 525 526 527 528 529 530 531 | Next Page >