time estimation - Page 524

WP7 “Phantom Data” Source Possibly Revealed?

- by Bil Simser

Recently there’s been rumours floating around regarding “phantom” Windows Phone 7 data being magically sent and received on the latest WP7 phones. The news has mostly been floating around twitter so I didn’t pay it much attention. The BBC Technology News picked it up so I thought I would look more into it myself seeing that we have WP7 phones and maybe there was some truth to all this (and more importantly what was the cause). Full disclosure. I don’t have a lot of data points around this. This is from looking at a few phone logs, changing the configuration and looking back again after the change. I haven’t done a clean baseline test nor have I done testing with hundreds of phones. I leave the experience up to the reader to decide. So I went spelunking into the phone logs to see what was up. Most providers will show you data usage, at least on a daily basis. I lucked out with the provider and plan in that they provide hourly breakdowns. Here’s a snapshot from my usage throughout one night. Timestamp Data Usage 12:38:30 AM 2098 Kilobytes 1:30:30 AM 2 Kilobytes 2:38:30 AM 7118 Kilobytes 3:38:30 AM 6622 Kilobytes 4:38:30 AM 76 Kilobytes 5:38:30 AM 29 Kilobytes 6:38:30 AM 19 Kilobytes 7:38:30 AM 20 Kilobytes So a few observations from this data: Data seems to be collected on a regular basis. Looking at some other people phone logs, the times vary but it’s always hourly. There’s not a tremendous amount of data here (about 16 megabytes) but it seems like a lot for 7 hours The phone was connected to my home Wifi during this period Nothing was running and the phone was in a locked state Like I said, not a lot of data but it adds up. 16MB for 7 hours = about 50MB in a 24 hour period. That’s just plain old data being collected (somewhere, somehow) and not actual usage (Marketplace, Email, Browsing, etc.). Besides, when connected to a WiFi network you shouldn’t be charged data usage from your phone company (in theory, YMMV). After reviewing the logs I made a theory that the only thing that could possibly be sending data is the Feedback feature. With no other apps running under lock, what else could it be? In Windows 7 under your Settings the last option is Feedback. This sends feedback to Microsoft to “help improve Windows Phone”. On this page you have three options: Send feedback and use my cellular data connection Send feedback and (presumably) use my WiFi connection Don’t send feedback Knowing what I know about Microsoft, they do use the feedback data. For example some of the placement and inclusion of features in Office 2007 was based on that Feedback data that Office sends (assuming you had opted in). However in the Privacy Statement (it’s long but a good read at least once in your life), the Phone manual, and every other source I could look at there is no information about how much data it’s planning to send, just that it’s sending some data and that “some data charges with your carrier may apply”. Looking back at the logs, I have to wonder. 6MB at 3:30 and *then* 7MB the next hour. That’s a lot of information. And it adds up. 50MB in a 24 hour period X 30 days puts most people over a normal 1GB plan. And frankly why am I paying for a data plan only to have 80% of it chewed up by Microsoft, with no real benefit to me. If they included porn in the 50mb daily transfer I’d be okay with this, but I don’t see any new movies on my phone. So I turned it off. Set Feedback to disabled and wait. I waited. And waited. And generally didn’t use the phone if I could. The next day I went back to look at the data usage logs from the time period after turning the feedback mechanism off. Here are the results. Timestamp Data Usage 1:19:48 PM 0 Kilobytes 2:19:48 PM 0 Kilobytes 3:19:48 PM 0 Kilobytes 4:19:48 PM 678 Kilobytes (took a phone call) 5:19:48 PM 82 Kilobytes 6:19:48 PM 88 Kilobytes 7:20:30 PM 86 Kilobytes (guess they changed their reporting time) 8:20:30 PM 86 Kilobytes 9:20:30 PM 66 Kilobytes 10:20:30 PM 67 Kilobytes 11:20:30 PM 49 Kilobytes 12:20:30 AM 32 Kilobytes 1:20:30 AM 38 Kilobytes 2:20:31 AM 18 Kilobytes 3:20:31 AM 27 Kilobytes 4:20:31 AM 86 Kilobytes 5:20:31 AM 53 Kilobytes 6:20:31 AM 22 Kilobytes 7:22:15 AM 30 Kilobytes (another reporting time change) 8:22:15 AM 29 Kilobytes 9:22:15 AM 74 Kilobytes 10:22:15 AM 154 Kilobytes (phone call) 11:22:15 AM 12 Kilobytes 12:13:27 PM 49 Kilobytes 1:13:27 PM 197 Kilobytes (phone call) Quite a *drastic* change from what Feedback was turned on. I mean for a 24 hour period (sans 3 phone calls) I consumed about 1MB. Still quite a bit of transfer going on but at least it amounts to 30MB per month, not 30MB per day! Like I said this observation is neither scientific or conclusive. You decide what to do but frankly until Microsoft makes this data transfer exempt from your data plan (like that will happen) I would just turn Feedback off. YMMV.

Read the article

Clean Up the New Ubuntu Grub2 Boot Menu

- by Trevor Bekolay

Ubuntu adopted the new version of the Grub boot manager in version 9.10, getting rid of the old problematic menu.lst. Today we look at how to change the boot menu options in Grub2. Grub2 is a step forward in a lot of ways, and most of the annoying menu.lst issues from the past are gone. Still, if you’re not vigilant with removing old versions of the kernel, the boot list can still end up being longer than it needs to be. Note: You may have to hold the SHIFT button on your keyboard while booting up to get this menu to show. If only one operating system is installed on your computer, it may load it automatically without displaying this menu. Remove Old Kernel Entries The most common clean up task for the boot menu is to remove old kernel versions lying around on your machine. In our case we want to remove the 2.6.32-21-generic boot menu entries. In the past, this meant opening up /boot/grub/menu.lst…but with Grub2, if we remove the kernel package from our computer, Grub automatically removes those options. To remove old kernel versions, open up Synaptic Package Manager, found in the System > Administration menu. When it opens up, type the kernel version that you want to remove in the Quick search text field. The first few numbers should suffice. For each of the entries associated with the old kernel (e.g. linux-headers-2.6.32-21 and linux-image-2.6.32-21-generic), right-click and choose Mark for Complete Removal. Click the Apply button in the toolbar and then Apply in the summary window that pops up. Close Synaptic Package Manager. The next time you boot up your computer, the Grub menu will not contain the entries associated with the removed kernel version. Remove Any Option by Editing /etc/grub.d If you need more fine-grained control, or want to remove entries that are not kernel versions, you must change the files located in /etc/grub.d. /etc/grub.d contains files that hold the menu entries that used to be contained in /boot/grub/menu.lst. If you want to add new boot menu entries, you would create a new file in this folder, making sure to mark it as executable. If you want to remove boot menu entries, as we do, you would edit files in this folder. If we wanted to remove all of the memtest86+ entries, we could just make the 20_memtest86+ file non-executable, with the terminal command sudo chmod –x 20_memtest86+ Followed by the terminal command sudo update-grub Note that memtest86+ was not found by update-grub because it will only consider executable files. However, instead, we’re going to remove the Serial console 115200 entry for memtest86+… Open a terminal window Applications > Accessories > Terminal. In the terminal window, type in the command: sudo gedit /etc/grub.d/20_memtest86+ The menu entries are found at the bottom of this file. Comment out the menu entry for serial console 115200 by adding a “#” to the start of each line. Save and close this file. In the terminal window you opened, enter in the command sudo update-grub Note: If you don’t run update-grub, the boot menu options will not change! Now, the next time you boot up, that strange entry will be gone, and you’re left with a simple and clean boot menu. Conclusion While changing Grub2’s boot menu may seem overly complicated to legacy Grub masters, for normal users, Grub2 means that you won’t have to change the boot menu that often. Fortunately, if you do have to do it, the process is still pretty easy. For more detailed information about how to change entries in Grub2, this Ubuntu forum thread is a great resource. If you’re using an older version of Ubuntu, check out our article on how to clean up Ubuntu grub boot menu after upgrades. Similar Articles Productive Geek Tips Clean Up Ubuntu Grub Boot Menu After UpgradesReinstall Ubuntu Grub Bootloader After Windows Wipes it OutChange the GRUB Menu Timeout on UbuntuHow To Switch to Console Mode for Ubuntu VMware GuestSet Windows as Default OS when Dual Booting Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

Read the article

Performance considerations for common SQL queries

- by Jim Giercyk

Originally posted on: http://geekswithblogs.net/NibblesAndBits/archive/2013/10/16/performance-considerations-for-common-sql-queries.aspxSQL offers many different methods to produce the same results. There is a never-ending debate between SQL developers as to the “best way” or the “most efficient way” to render a result set. Sometimes these disputes even come to blows….well, I am a lover, not a fighter, so I decided to collect some data that will prove which way is the best and most efficient. For the queries below, I downloaded the test database from SQLSkills: http://www.sqlskills.com/sql-server-resources/sql-server-demos/. There isn’t a lot of data, but enough to prove my point: dbo.member has 10,000 records, and dbo.payment has 15,554. Our result set contains 6,706 records. The following queries produce an identical result set; the result set contains aggregate payment information for each member who has made more than 1 payment from the dbo.payment table and the first and last name of the member from the dbo.member table. /*************/ /* Sub Query */ /*************/ SELECT a.[Member Number] , m.lastname , m.firstname , a.[Number Of Payments] , a.[Average Payment] , a.[Total Paid] FROM ( SELECT member_no 'Member Number' , AVG(payment_amt) 'Average Payment' , SUM(payment_amt) 'Total Paid' , COUNT(Payment_No) 'Number Of Payments' FROM dbo.payment GROUP BY member_no HAVING COUNT(Payment_No) > 1 ) a JOIN dbo.member m ON a.[Member Number] = m.member_no /***************/ /* Cross Apply */ /***************/ SELECT ca.[Member Number] , m.lastname , m.firstname , ca.[Number Of Payments] , ca.[Average Payment] , ca.[Total Paid] FROM dbo.member m CROSS APPLY ( SELECT member_no 'Member Number' , AVG(payment_amt) 'Average Payment' , SUM(payment_amt) 'Total Paid' , COUNT(Payment_No) 'Number Of Payments' FROM dbo.payment WHERE member_no = m.member_no GROUP BY member_no HAVING COUNT(Payment_No) > 1 ) ca /********/ /* CTEs */ /********/ ; WITH Payments AS ( SELECT member_no 'Member Number' , AVG(payment_amt) 'Average Payment' , SUM(payment_amt) 'Total Paid' , COUNT(Payment_No) 'Number Of Payments' FROM dbo.payment GROUP BY member_no HAVING COUNT(Payment_No) > 1 ), MemberInfo AS ( SELECT p.[Member Number] , m.lastname , m.firstname , p.[Number Of Payments] , p.[Average Payment] , p.[Total Paid] FROM dbo.member m JOIN Payments p ON m.member_no = p.[Member Number] ) SELECT * FROM MemberInfo /************************/ /* SELECT with Grouping */ /************************/ SELECT p.member_no 'Member Number' , m.lastname , m.firstname , COUNT(Payment_No) 'Number Of Payments' , AVG(payment_amt) 'Average Payment' , SUM(payment_amt) 'Total Paid' FROM dbo.payment p JOIN dbo.member m ON m.member_no = p.member_no GROUP BY p.member_no , m.lastname , m.firstname HAVING COUNT(Payment_No) > 1 We can see what is going on in SQL’s brain by looking at the execution plan. The Execution Plan will demonstrate which steps and in what order SQL executes those steps, and what percentage of batch time each query takes. SO….if I execute all 4 of these queries in a single batch, I will get an idea of the relative time SQL takes to execute them, and how it renders the Execution Plan. We can settle this once and for all. Here is what SQL did with these queries: Not only did the queries take the same amount of time to execute, SQL generated the same Execution Plan for each of them. Everybody is right…..I guess we can all finally go to lunch together! But wait a second, I may not be a fighter, but I AM an instigator. Let’s see how a table variable stacks up. Here is the code I executed: /********************/ /* Table Variable */ /********************/ DECLARE @AggregateTable TABLE ( member_no INT , AveragePayment MONEY , TotalPaid MONEY , NumberOfPayments MONEY ) INSERT @AggregateTable SELECT member_no 'Member Number' , AVG(payment_amt) 'Average Payment' , SUM(payment_amt) 'Total Paid' , COUNT(Payment_No) 'Number Of Payments' FROM dbo.payment GROUP BY member_no HAVING COUNT(Payment_No) > 1 SELECT at.member_no 'Member Number' , m.lastname , m.firstname , at.NumberOfPayments 'Number Of Payments' , at.AveragePayment 'Average Payment' , at.TotalPaid 'Total Paid' FROM @AggregateTable at JOIN dbo.member m ON m.member_no = at.member_no In the interest of keeping things in groupings of 4, I removed the last query from the previous batch and added the table variable query. Here’s what I got: Since we first insert into the table variable, then we read from it, the Execution Plan renders 2 steps. BUT, the combination of the 2 steps is only 22% of the batch. It is actually faster than the other methods even though it is treated as 2 separate queries in the Execution Plan. The argument I often hear against Table Variables is that SQL only estimates 1 row for the table size in the Execution Plan. While this is true, the estimate does not come in to play until you read from the table variable. In this case, the table variable had 6,706 rows, but it still outperformed the other queries. People argue that table variables should only be used for hash or lookup tables. The fact is, you have control of what you put IN to the variable, so as long as you keep it within reason, these results suggest that a table variable is a viable alternative to sub-queries. If anyone does volume testing on this theory, I would be interested in the results. My suspicion is that there is a breaking point where efficiency goes down the tubes immediately, and it would be interesting to see where the threshold is. Coding SQL is a matter of style. If you’ve been around since they introduced DB2, you were probably taught a little differently than a recent computer science graduate. If you have a company standard, I strongly recommend you follow it. If you do not have a standard, generally speaking, there is no right or wrong answer when talking about the efficiency of these types of queries, and certainly no hard-and-fast rule. Volume and infrastructure will dictate a lot when it comes to performance, so your results may vary in your environment. Download the database and try it!

Read the article

Create Chemistry Equations and Diagrams in Word

- by Matthew Guay

Microsoft Word is a great tool for formatting text, but what if you want to insert a chemistry formula or diagram? Thanks to a new free add-in for Word, you can now insert high-quality chemistry formulas and diagrams directly from the Ribbon in Word. Microsoft’s new Education Labs has recently released the new Chemistry Add-in for Word 2007 and 2010. This free download adds support for entering and editing chemistry symbols, diagrams, and formulas using the standard XML based Chemical Markup Language. You can convert any chemical name, such as benzene, or formula, such as H2O, into a chemical diagram, standard name, or formula. Whether you’re a professional chemist, just taking chemistry in school, or simply curious about the makeup of Citric Acid, this add-in is an exciting way to bring chemistry to your computer. This add-in works great on Word 2007 and 2010, including the 64 bit version of Word 2010. Please note that the current version is still in beta, so only run it if you are comfortable running beta products. Getting Started Download the Chemistry add-in from Microsoft Education Labs (link below), and unzip the file. Then, run the ChemistryAddinforWordBeta2.Setup.msi. It may inform you that you need to install the Visual Studio Tools for Office 3.0. Simply click Yes to download these tools. This will open the download in your default browser. Simply click run, or save and then run it when it is downloaded. Now, click next to install the Visual Studio Tools for Office as usual. When this is finished, run the ChemistryAddinforWordBeta2.Setup.msi again. This time, you can easily install it with the default options. Once it’s finished installing, open Word to try out the Chemistry Add-in. You will be asked if you want to install this customization, so click Install to enable it. Now you will have a new Chemistry tab in your Word ribbon. Here’s the ribbon in Word 2010… And here it is in Word 2007. Using the Chemistry Add-in It’s very easy to insert nice chemistry diagrams and formulas in Word with the Chemistry add-in. You can quickly insert a premade diagram from the Chemistry Gallery: Or you can insert a formula from file. Simply click “From File” and choose any Chemical Markup Language (.cml) formatted file to insert the chemical formula. You can also convert any chemical name to it’s chemical form. Simply select the word, right-click, select “Convert to Chemistry Zone” and then click on its name. Now you can see the chemical form in the sidebar if you click the Chemistry Navigator button, and can choose to insert the diagram into the document. Some chemicals will automatically convert to the diagram in the document, while others simply link to it in the sidebar. Either way, you can display exactly what you want. You can also convert a chemical formula directly to it’s chemical diagram. Here we entered H2O and converted it to Chemistry Zone: This directly converted it to the diagram directly in the document. You can click the Edit button on the top, and from there choose to either edit the 2D model of the chemical, or edit the labels. When you click Edit Labels, you may be asked which form you wish to display. Here’s the options for potassium permanganate: You can then edit the names and formulas, and add or remove any you wish. If you choose to edit the chemical in 2D, you can even edit the individual atoms and change the chemical you’re diagramming. This 2D editor has a lot of options, so you can get your chemical diagram to look just like you want. And, if you need any help or want to learn more about the Chemistry add-in and its features, simply click the help button in the Chemistry Ribbon. This will open a Word document containing examples and explanations which can be helpful in mastering all the features of this add-in. All of this works perfectly, whether you’re running it in Word 2007 or 2010, 32 or 64 bit editions. Conclusion Whether you’re using chemistry formulas everyday or simply want to investigate a chemical makeup occasionally, this is a great way to do it with tools you already have on your computer. It will also help make homework a bit easier if you’re struggling with it in high school or college. Links Download the Chemistry Add-in for Word Introducing Chemistry Add-in for Word – MSDN blogs Chemistry Markup Language – Wikipedia Similar Articles Productive Geek Tips Geek Reviews: Using Dia as a Free Replacement for Microsoft VisioEasily Summarize A Word 2007 DocumentCreate a Hyperlink in a Word 2007 Flow Chart and Hide Annoying ScreenTipsHow To Create and Publish Blog Posts in Word 2010 & 2007Using Word 2007 as a Blogging Tool TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7? Change DNS servers on the fly with DNS Jumper

Read the article

Oracle Enterprise Data Quality: Ever Integration-ready

- by Mala Narasimharajan

It is closing in on a year now since Oracle’s acquisition of Datanomic, and the addition of Oracle Enterprise Data Quality (EDQ) to the Oracle software family. The big move has caused some big shifts in emphasis and some very encouraging excitement from the field. To give an illustration, combined with a shameless promotion of how EDQ can help to give quick insights into your data, I did a quick Phrase Profile of the subject field of emails to the Global EDQ mailing list since it was set up last September. The results revealed a very clear theme: Integration, Integration, Integration! As well as the important Siebel and Oracle Data Integrator (ODI) integrations, we have been asked about integration with a huge variety of Oracle applications, including EBS, Peoplesoft, CRM on Demand, Fusion, DRM, Endeca, RightNow, and more - and we have not stood still! While it would not have been possible to develop specific pre-integrations with all of the above within a year, we have developed a package of feature-rich out-of-the-box web services and batch processes that can be plugged into any application or middleware technology with ease. And with Siebel, they work out of the box. Oracle Enterprise Data Quality version 9.0.4 includes the Customer Data Services (CDS) pack – a ready set of standard processes with standard interfaces, to provide integrated: Address verification and cleansing Individual matching Organization matching The services can are suitable for either Batch or Real-Time processing, and are enabled for international data, with simple configuration options driving the set of locale-specific dictionaries that are used. For example, large dictionaries are provided to support international name transcription and variant matching, including highly specialized handling for Arabic, Japanese, Chinese and Korean data. In total across all locales, CDS includes well over a million dictionary entries. Excerpt from EDQ’s CDS Individual Name Standardization Dictionary CDS has been developed to replace the OEM of Informatica Identity Resolution (IIR) for attached Data Quality on the Oracle price list, but does this in a way that creates a ‘best of both worlds’ situation for customers, who can harness not only the out-of-the-box functionality of pre-packaged matching and standardization services, but also the flexibility of OEDQ if they want to customize the interfaces or the process logic, without having to learn more than one product. From a competitive point of view, we believe this stands us in good stead against our key competitors, including Informatica, who have separate ‘Identity Resolution’ and general DQ products, and IBM, who provide limited out-of-the-box capabilities (with a steep learning curve) in both their QualityStage data quality and Initiate matching products. Here is a brief guide to the main services provided in the pack: Address Verification and Standardization EDQ’s CDS Address Cleaning Process The Address Verification and Standardization service uses EDQ Address Verification (an OEM of Loqate software) to verify and clean addresses in either real-time or batch. The Address Verification processor is wrapped in an EDQ process – this adds significant capabilities over calling the underlying Address Verification API directly, specifically: Country-specific thresholds to determine when to accept the verification result (and therefore to change the input address) based on the confidence level of the API Optimization of address verification by pre-standardizing data where required Formatting of output addresses into the input address fields normally used by applications Adding descriptions of the address verification and geocoding return codes The process can then be used to provide real-time and batch address cleansing in any application; such as a simple web page calling address cleaning and geocoding as part of a check on individual data. Duplicate Prevention Unlike Informatica Identity Resolution (IIR), EDQ uses stateless services for duplicate prevention to avoid issues caused by complex replication and synchronization of large volume customer data. When a record is added or updated in an application, the EDQ Cluster Key Generation service is called, and returns a number of key values. These are used to select other records (‘candidates’) that may match in the application data (which has been pre-seeded with keys using the same service). The ‘driving record’ (the new or updated record) is then presented along with all selected candidates to the EDQ Matching Service, which decides which of the candidates are a good match with the driving record, and scores them according to the strength of match. In this model, complex multi-locale EDQ techniques can be used to generate the keys and ensure that the right balance between performance and matching effectiveness is maintained, while ensuring that the application retains control of data integrity and transactional commits. The process is explained below: EDQ Duplicate Prevention Architecture Note that where the integration is with a hub, there may be an additional call to the Cluster Key Generation service if the master record has changed due to merges with other records (and therefore needs to have new key values generated before commit). Batch Matching In order to allow customers to use different match rules in batch to real-time, separate matching templates are provided for batch matching. For example, some customers want to minimize intervention in key user flows (such as adding new customers) in front end applications, but to conduct a more exhaustive match on a regular basis in the back office. The batch matching jobs are also used when migrating data between systems, and in this case normally a more precise (and automated) type of matching is required, in order to minimize the review work performed by Data Stewards. In batch matching, data is captured into EDQ using its standard interfaces, and records are standardized, clustered and matched in an EDQ job before matches are written out. As with all EDQ jobs, batch matching may be called from Oracle Data Integrator (ODI) if required. When working with Siebel CRM (or master data in Siebel UCM), Siebel’s Data Quality Manager is used to instigate batch jobs, and a shared staging database is used to write records for matching and to consume match results. The CDS batch matching processes automatically adjust to Siebel’s ‘Full Match’ (match all records against each other) and ‘Incremental Match’ (match a subset of records against all of their selected candidates) modes. The Future The Customer Data Services Pack is an important part of the Oracle strategy for EDQ, offering a clear path to making Data Quality Assurance an integral part of enterprise applications, and providing a strong value proposition for adopting EDQ. We are planning various additions and improvements, including: An out-of-the-box Data Quality Dashboard Even more comprehensive international data handling Address search (suggesting multiple results) Integrated address matching The EDQ Customer Data Services Pack is part of the Enterprise Data Quality Media Pack, available for download at http://www.oracle.com/technetwork/middleware/oedq/downloads/index.html.

Read the article

The Winds of Change are a Blowin’

- by Ajarn Mark Caldwell

For six years I have been an avid and outspoken fan and paying customer of SourceGear products…from Vault to Dragnet to Fortress and on to Vault Professional, but that is all changing now. Not the fan part, but the paying customer part. I’m still a huge fan. I think that SourceGear does a great job with their product and support has been fantastic when needed (which is not very often). I think that Eric Sink has done a fine job building a quality company and products, and I appreciate his contributions to the tech community through this blogging and books. I still think their products are high quality and do a fantastic job of what they do. But there’s the rub…what they do is no longer enough for me. As I have rebuilt our development team over the last couple of years, and we have begun to investigate Scrum and Kanban, I realize that I need more visibility into the progress of the team. I need better project management tools, and this is where Vault Professional lags behind several other tools. Granted, in the latest release (Vault 6.0) they added a nice time tracking feature, but I want more. (Note, I did contact SourceGear about my quest for more, but apparently, the rest of their customer base has not been clamoring for this and so they have not built it. Granted, I wasn’t clamoring for it either until just recently, but unfortunately for SourceGear, I want it now and don’t want to wait for them to build it into their system.) Ironically, it was SourceGear themselves who started to turn me on to the possibilities of other tools. They built a limited integration with Axosoft OnTime which I read about several times on their support site (I used to regularly read and occasionally comment on their Support Forum). I decided to check out OnTime and was very impressed with the tool for work item tracking and project management (not to mention their great Scrum Master in 10 Minutes video). I fell in love with the capabilities of OnTime. Unfortunately, the integration with Vault for source control management was, as I mentioned, limited. I could have forfeited the integration between work items and source code, but there is too much benefit to linking check-ins to work items for me to give that up. So then I did what was previously unthinkable for me, I considered switching not just the work tracking tool, but also the source code management tool. This was really stepping outside my comfort zone because source code is Gold, and not to be trifled with. When you find a good weapon to protect your gold, stick with it. I looked at Git and Tortoise SVN, but the integration methods for those was pretty rough compared to what I was used to. The recommended tool from Axosoft’s point of view appeared to be RocketSVN, but I really wasn’t sure I wanted to go the “flavor of Subversion” route. Then I started thinking about that other tool I liked back when I first chose to go with Vault, but couldn’t afford: Team Foundation Server. And what do you know…Microsoft has not only radically improved it over that version from back in 2006, but they also came to their senses about how it should be licensed, and it is much more affordable now. So I started looking into the latest capabilities in the 2012 version, and I fell in love all over again. I really went deep on checking out the tools. I watched numerous webcasts from Microsoft partners, went to a beta preview on Microsoft’s campus, and watched a lot of Channel 9 videos on the new ALM features (oooh…shiny). Frankly, I was very impressed with the capabilities of the newest version, and figured this was probably our direction. As an interesting twist of fate, one of my employees crossed paths with an ALM Consultant from Northwest Cadence, a local Microsoft Partner, and one of the companies that produced several of the webcasts that I had been watching. So I gave Bryon a call and started grilling him to see if he really knew anything or was just another guy who couldn’t find a job so he called himself a consultant. It turns out Bryon actually knows a lot, especially in an area that was becoming a frustration point for us: Branching strategies and automated builds (that’s probably a whole separate blog entry). As we talked, Bryon suggested we look into doing a DTDPS (Developer Tools Deployment Planning Services) session with his company. This is a service that can be paid for by Microsoft Enterprise Agreement planning services credits or SA training benefits, and, again, coincidentally, we had several that were just about to expire, so I put them to good use. The DTDPS sessions were great; and Bryon, Rick, and the rest of the folks at Northwest Cadence have been a pleasure to work with. We have just purchased a new server for our TFS rollout and are planning the steps and options right now. This is still a big project ahead of us to not only install and configure TFS, but also to load all of our source code (many different systems, not just one program) and transition to the new way of life with TFS, but I am convinced that it is the right move for my team at this point in time. We need the new capabilities that are in alignment with Scrum and Kanban methodologies in order to more efficiently manage all the different projects that we have going on at one time. I would still wholeheartedly endorse SourceGear’s products and Axosoft’s OnTime for those whose needs are met by those tools, but for me and my team, I think that TFS is the right fit, and I am looking forward to the change.

Read the article

SQLAuthority News – A Real Story of Book Getting ‘Out of Stock’ to A 25% Discount Story Available

- by pinaldave

As many of my readers may know, I have recently written a few books. Right now I’d like to talk about SQL Server Interview Questions and Answers (http://bit.ly/sqlinterviewbook ), my newest release. What inspired me to write this book was similar to my motivations for my previous titles – I wanted to help people understand SQL Server concepts and ace interview questions so that they could get a great job they love, as much as I love my own job. If you are new to SQL Server, don’t think I left you out of my book writing efforts. If you are new to the subject or have not had to deal with SQL Server in a long time, this book is perfect for someone who wants or needs a last minute refresher. If you are facing an upcoming interview and want to impress your future bosses, this book is perfect for getting you up to speed in a short time. However, if you are already an expert, you will still find a lot to learn and many pointers and suggestions that go deep into the subject. As I said before, I wrote this book in order to help my community, and I certainly hoped that this book would become popular. However, we decided to print a very limited number of copies to begin with. We did not think that it would sell out since much of the information is available for free online. We could not have been more wrong! We incorrectly estimated what people wanted. We did not realize that there is still a need and an interest for structured learning. So, with great reservations, we printed quite a large number of copies – and it still ran out in 36 hours! We got call from the online store with a request for more copies within 12 hours. But we had printed only as many as we had sent them. There were no extra copies. We finally talked to the printer to get more copies. However, due to festivals and holidays the copies could not be shipped to the online retailer for two days. We knew for sure that they were going to be out of the book for 48 hours. 48 hours – this was very difficult as the book was very highly anticipated. Many people wanted to buy this book quickly, and receive it soon in order to meet a deadline or to study for an upcoming test of their knowledge. But now this book was out of stock on the retail store. The way the online store works is that if the Indian-priced book is not there they list the US version of the book so that buyers will not be disappointed. The problem was that the US price of the book is three times more than the Indian price – which means one has to pay three times as much to buy this book instead of the previous very low price. We received a lot of communication on this subject, here are some examples: We are now businessmen and only focusing on money Why has the price tripled in 36 hours Why we are not honest with the price If the prices will ever come down And some of the letters we cannot post here! Well, finally after 48 hours the Indian stock was finally available online. Thanks to our printer who worked day and night to get all the copies printed. He divided the complete stock in two parts. The first part they sent immediately to online retailer and the second part they kept with them to sell. Finally, the online retailer got them online promptly as well, and the price returned to normal. Our book once again got in business and became the eighth most popular new release in 36 hours. We appreciate your love and support. Without all of your interest and love we would have never come this far and the book would not be so successful. After thinking about all your support and how patient you were with our online troubles, the online retailer has decided to give an extra 25% discount for a limited time only. I think the 48 hours when the book was out of stock were very horrible and stressful and I’d like to apologize to my loyal readers for the mishap. I hope that the 25% off is enough to sooth any remaining hurt feelings, and that everyone will continue to learn and discover things in the book. Once again thank you so much and I truly hope that you all enjoy reading the book as much as I enjoyed writing it. My book SQL Server Interview Questions and Answers is available now. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, SQL, SQL Authority, SQL Interview Questions and Answers, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLAuthority News, T SQL, Technology

Read the article

Learn About Oracle’s Strategy for a Simple, Modern User Experience at OpenWorld 2012

- by Applications User Experience

By Kathy Miedema, Oracle Applications User Experience If you’re interested in what the best possible user experience looks like, you’ll want to hear what Oracle’s Applications User Experience team is planning for OpenWorld 2012, Sept. 30-Oct. 4 in San Francisco. This year, we will talk Fusion, Fusion, Fusion. We were among the first to show Oracle Fusion Applications in the last couple of years, and we’ll be showing it again this year so you can see what Oracle is planning for the next generation of enterprise applications. Attend our sessions to learn more about the user experience strategy in which Oracle is investing. Simplicity is the driving force behind the demos that we are unveiling now, which you can see at OpenWorld. We want to create opportunities for productivity and efficiency, and deliver enterprise data across devices to help you do your work in the way best suited to your job and needs, said Jeremy Ashley, Vice President, Oracle Applications User Experience. You can see the new look for Fusion Applications at a general session led by Ashley at 3:30 p.m. on Wednesday, Oct. 3. You’ll also have the chance to learn more about tailoring in Oracle Fusion Applications, and gain a new understanding of the investment in the user experience behind Fusion Applications at our sessions (see session information below). Inside the Oracle Applications User Experience team’s on-site lab at Oracle OpenWorld 2011. Head to the demogrounds to see new demos from the Applications User Experience team, including the new look for Fusion Applications and what we’re building for mobile platforms. Take a spin on our eye tracker, a very cool tool that we use to research the usability of a particular design. Visit the Usable Apps OpenWorld page to find out where our demopods will be located. We are also recruiting participants for our on-site lab, in which we gather feedback on new user experience designs, and taking reservations for a charter bus that will bring you to Oracle headquarters for a lab tour Thursday, Oct. 4, or Friday, Oct. 5. Tours leave at 10 a.m. and 1:45 p.m. from the Moscone Center in San Francisco. You’ll see more of our newest designs at the lab tour, and some of our research tools in action. Can’t participate in a customer feedback session or take a lab tour this time around? Visit Usable Apps to participate or book a tour another time. For more information on any OpenWorld sessions, check the content catalog – also available at www.oracle.com/openworld. For information on Applications User Experience (Apps UX) sessions and activities, go to the Usable Apps OpenWorld page. APPS UX OPENWORLD SESSIONS Oracle’s Roadmap to a Simple, Modern User Experience Presenter: Jeremy Ashley, Vice President Applications User Experience, Oracle; with Debra Lilley, Fujitsu Consulting; Basheer Khan, Innowave; and Edward Roske, InterRelSession ID: CON9467Date: Wednesday, Oct. 3 Time: 3:30 - 4:30 p.m.Location: Moscone West - 3002/3004 Jeremy Ashley Oracle Fusion Applications: Transforming Insight into Action Presenters: Killian Evers and Kristin Desmond, OracleSession ID: CON8718Date: Thursday, Oct. 4Time: 11:15 a.m. - 12:15 p.m.Location: Moscone West - 2008 “FRIENDS OF UX” OPENWORLD SESSIONS Sessions by the Oracle Usability Advisory Board (OUAB) members: Advances in Oracle Enterprise Governance, Risk, and Compliance Manager Presenters: Koen Delaure, KPMG Advisory NV, and Oracle Usability Advisory Board member; Russell Stohr, Oracle Session ID: CON9389Date: Tuesday, Oct. 2Time: 1:15 - 2:15 p.m.Location: Palace Hotel - Concert Optimize Oracle E-Busines Suite Procure-to-Pay: Cut Inefficiences/Fraud with Oracle GRC Apps Presenters: Koen Delaure, KPMG Advisory NV, and Solveig Wagner, Seadrill Management AS, both Oracle Usability Advisory Board members; and Swarnali Bag, OracleSession ID: CON9401Date: Monday, Oct. 1Time: 12:15 - 1:15 p.m.Location: Intercontinental - Sutter Showcase of JD Edwards EnterpriseOne Mobility Presenters: Jon Wells, Westmoreland Coal Co., Oracle Usability Advisory Board member; Rob Mills and Liz Davson, Town of Oakville; Keith Sholes and Louise Farner, Oracle Session ID: CON9123Date: Tuesday, Oct. 2Time: 1:15 - 2:15 p.m.Location: InterContinental - Grand Ballroom B Sessions by the Fusion User Experience Adovcates (FXA) Usability and Features of Oracle Fusion Applications, Built upon Oracle Fusion Middleware Presenters: Debra Lilley, Fujitsu Consulting and Oracle Usability Advisory Board member; John King, King Training ResourcesSession ID: UGF10371Date: Sunday, Sept. 30Time: 11 a.m. - 11:45 a.m. Location: Moscone West – 2010 Ten Things to Love About Oracle Fusion Project Portfolio Management Presenter: Floyd Teter, EiS TechnologiesSession ID: CON6021Date: Tuesday, Oct. 2Time: 10:15 - 11:15 a.m.Location: Moscone West – 2003

Read the article

Training on Demand Certification Packages for DBAs

- by Antoinette O'Sullivan

The demand for Database Administrators continues to grow.*Almost two-thirds of IT hiring managers indicate that they highly value certifications in validatingIT skills and expertise.** * Job satisfaction and DBA work growth rate: CNN Money's 2011 Best Jobs in America survey.** Survey among nearly 1,700 respondents by CompTIA, the nonprofit trade association for the IT industry, cited in Certification Magazine, Feb. 14 th., 2012. Get Certified with Training on DemandAre you an experienced Database professional eager to achieve certification?Is time your most precious resource?Then try our new Training On Demand Certification Value Package with 20% discount. These all-in-one packages give you everything you need to get certified with success: Why Training On Demand: Expert training from Oracle’s top instructors Sophisticated streaming video recording Available for 90 days, 24 hours a day, 7 days a week White boarding and training labs for hands-on experience Start, stop, pause, jump or rewind sections of the course as needed Oracle University instructor Q&A A full-text search leads to the right video fragment in a matter of seconds. Watch this demo to see how it works. Additional Certification resources: Benefits of Oracle Certification Database Certification Paths Available Database Certification Exams Getting certified has never been easier!For assistance contact your local Oracle University Service Desk. Many organizations deploy both Oracle Database and MySQL side by side to serve different needs, and as a database professional you can find training courses on both topics at Oracle University! Check out the upcoming Oracle Database 11g training courses and MySQL training courses. Even if you're only managing Oracle Databases at this point of time, getting familiar with MySQL Database will broaden your career path with growing job demand. These Value Packages are also available with the following training formats: In-Class, Live Virtual Class and Self Study: MySQL Database Administration Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand MySQL Database Administrator Certification Value Package View Package View Package View Package View Package MySQL Developer Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand MySQL Developer Certification Value Package View Package View Package Oracle Database 10g Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand Oracle Database 10g Administrator Certified Associate Certification Value Package View Package View Package View Package Oracle Database 10g Administrator Certified Professional Certification Value Package View Package View Package View Package Oracle Database 11g Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand Oracle Database 11g Administrator Certified Associate Certification Value Package View Package View Package View Package View Package Oracle Database 11g Administrator Certified Professional Certification Value Package View Package View Package View Package View Package Exam Prep Seminar Value Package: Oracle Database Admin 1 View Package Oracle Database 11g Administrator Certified Professional UPGRADE Certification Value Package View Package Oracle Real Application Clusters 11g and Grid Infrastructure Administraton Certified Expert Certification Value Package View Package Exam Prep Seminar Value Package: Oracle Database Admin 2 View Package Exam Prep Seminar Value Package: Oracle RAC 11g and Grid Infrastructure Administration View Package Exam Prep Seminar Value Package: Upgrade Oracle Certified Professional (OCP) to Oracle Database 11g View Package SQL and PL/SQL Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand Oracle Database Sql Expert Certification Value Package View Package View Package View Package View Package Exam Prep Seminar Value Package: Oracle Database SQL View Package View our Certification Value Packages Mention this code at the time of booking: E1245 Connect For a full list of MySQL Training courses and events, go to http://oracle.com/education/mysql.

Read the article

Silverlight Firestarter Wrap Up and WCF RIA Services Talk Sample Code

- by dwahlin

I had a great time attending and speaking at the Silverlight Firestarter event up in Redmond on December 2, 2010. In addition to getting a chance to hang out with a lot of cool people from Microsoft such as Scott Guthrie, John Papa, Tim Heuer, Brian Goldfarb, John Allwright, David Pugmire, Jesse Liberty, Jeff Handley, Yavor Georgiev, Jossef Goldberg, Mike Cook and many others, I also had a chance to chat with a lot of people attending the event and hear about what projects they’re working on which was awesome. If you didn’t get a chance to look through all of the new features coming in Silverlight 5 check out John Papa’s post on the subject. While at the Silverlight Firestarter event I gave a presentation on WCF RIA Services and wanted to get the code posted since several people have asked when it’d be available. The talk can be viewed by clicking the image below. Code from the talk follows as well as additional links. I had a few people ask about the green bracelet on my left hand since it looks like something you’d get from a waterpark. It was used to get us access down a little hall that led backstage and allowed us to go backstage during the event. I thought it looked kind of dorky but it was required to get through security. Sample Code from My WCF RIA Services Talk (To login to the 2 apps use “user” and “P@ssw0rd”. Make sure to do a rebuild of the projects in Visual Studio before running them.) View All Silverlight Firestarter Talks and Scott Guthrie’s Keynote WCF RIA Services SP1 Beta for Silverlight 4 WCF RIA Services Code Samples (including some SP1 samples) Improved binding support in EntitySet and EntityCollection with SP1 (Kyle McClellan’s Blog) Introducing an MVVM-Friendly DomainDataSource: The DomainCollectionView (Kyle McClellan’s Blog) I’ve had the chance to speak at a lot of conferences but never with as many cameras, streaming capabilities, people watching live and overall hype involved. Over 1000 people registered to attend the conference in person at the Microsoft campus and well over 15,000 to watch it through the live stream. The event started for me on Tuesday afternoon with a flight up to Seattle from Phoenix. My flight was delayed 1 1/2 hours (I seem to be good at booking delayed flights) so I didn’t get up there until almost 8 PM. John Papa did a tech check at 9 PM that night and I was scheduled for 9:30 PM. We basically plugged in my laptop backstage (amazing number of servers, racks and audio devices back there) and made sure everything showed up properly on the projector and the machines recording the presentation. In addition to a dedicated show director, there were at least 5 tech people back stage and at least that many up in the booth running lights, audio, cameras, and other aspects of the show. I wish I would’ve taken a picture of the backstage setup since it was pretty massive – servers all over the place. I definitely gained a new appreciation for how much work goes into these types of events. Here’s what the room looked like right before my tech check– not real exciting at this point. That’s Yavor Georgiev (who spoke on WCF Services at the Firestarter) in the background. We had plenty of monitors to reference during the presentation. Two monitors for slides (right and left side) and a notes monitor. The 4th monitor showed the time and they’d type in notes to us as we talked (such as “You’re over time!” in my case since I went around 4 minutes over :-)). Wednesday morning I went back on campus at Microsoft and watched John Papa film a few Silverlight TV episodes with Dave Campbell and Ryan Plemons. Next I had the chance to watch the dry run of the keynote with Scott Guthrie and John Papa. We were all blown away by the demos shown since they were even better than expected. Starting at 1 PM on Wednesday I went over to Building 35 and listened to Yavor Georgiev (WCF Services), Jaime Rodriguez (Windows Phone 7), Jesse Liberty (Data Binding) and Jossef Goldberg and Mike Cook (Silverlight Performance) give their different talks and we all shared feedback with each other which was a lot of fun. Jeff Handley from the RIA Services team came afterwards and listened to me give a dry run of my WCF RIA Services talk. He had some great feedback that I really appreciated getting. That night I hung out with John Papa and Ward Bell and listened to John walk through his keynote demos. I also got a sneak peak of the gift given to Dave Campbell for all his work with Silverlight Cream over the years. It’s a poster signed by all of the key people involved with Silverlight: Thursday morning I got up fairly early to get to the event center by 8 AM for speaker pictures. It was nice and quiet at that point although outside the room there was a huge line of people waiting to get in. At around 8:30 AM everyone was let in and the main room was filled quickly. Two other overflow rooms in the Microsoft conference center (Building 33) were also filled to capacity. At around 9 AM Scott Guthrie kicked off the event and all the excitement started! From there it was all a blur but it was definitely a lot of fun. All of the sessions for the Silverlight Firestarter were recorded and can be watched here (including the keynote). Corey Schuman, John Papa and I also released 11 lab exercises and associated videos to help people get started with Silverlight. Definitely check them out if you’re interested in learning more! Level 100: Getting Started Lab 01 - WinForms and Silverlight Lab 02 - ASP.NET and Silverlight Lab 03 - XAML and Controls Lab 04 - Data Binding Level 200: Ready for More Lab 05 - Migrating Apps to Out-of-Browser Lab 06 - Great UX with Blend Lab 07 - Web Services and Silverlight Lab 08 - Using WCF RIA Services Level 300: Take me Further Lab 09 - Deep Dive into Out-of-Browser Lab 10 - Silverlight Patterns: Using MVVM Lab 11 - Silverlight and Windows Phone 7

Read the article

ISO Files to USB – The Cheap and Easy Way

- by RonGarlit

(DISCLAIMER: Yes there are lots of more elegant ISO software beside the free Microsoft one I’m about to show. But free is free and it has been tested and works for me for making advance bootable USB drives. That is another story. Look up Windows 8 Developer Preview for that one on BING.) For those of use that work with new technology all the time we accumulate a lot of ISO files and have to burn them to CD/DVD’s quite often. But we now have machines without burner in the corporate environment. We have personally Netbooks and light wait highly mobile laptops that do not have DVD burner. USB ports are all the rage and now we have USB 3.0 which is way faster than the 2.0 we are used to. Just looking at the technology, space saving and the cost issues alone is a reason to buy these answer to the DVD’s. So what is special about USB 2.0 and USB 3.0? USB 2 has a maximum speed of 480 Mbps... (That is Megabits per SECOND!!) Now look at the storage that we have with USB thumb drives that are now up to 64 GB in size, cell phone and PDAs that have a lots of internal storage built in well above the 16 Gig range. At the MAX USB 2.0 speed of 480 Mbps a full transfer of data in between devices can take a long time. Time is money right. Every back up a iPhone? Don’t get me started. So at least the engineers have been planning ahead with USB 3.0 which offers a maximum transfer speed of 4.8 Gbps... (That is Giga bits per SECOND!!) That speed is almost 10 times faster than USB 2.0 …. We don’t need to do the math on that one do we? But for now I'm thrilled with USB 2.0 and the fact I can get these little 4 Gig USB drives for $4.00 each at Staples on sale. Well that is a no brainer don’t you think. But what can you do with them to replace that DVD. Simply and cheaply put………. THIS! First let’s get an ISO file like the Visual Studio 2010 Ultimate DVD ISO from MSDN to demonstrate with. I develop on several computers so this is a good choice for me. So we downloaded the ISO file and put it in a folder somewhere like this. Next we go download to the Windows 7 USB/DVD Download Tool site and read about the tool. http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool And click this like to get the tool and install it. Once it is installed you go to the Start, Programs menu, Windows 7 USB DVD Download Tool folder. And then click the tool to open it up. As you will see it is a sweet, simple tool that was originally designed to put the ISO for Windows 7 which is designed to be bootable on a USB or DVD for us geeks to play with. It is now being used for the Windows 8 Developer Preview by many developers for that for the same purpose it was built for in the past. But for now we will use it to put a NON Bootable ISO on a USB. Hey it does the job and I’m reusing a left over program. Why buy the fancy one or a free trial and clutter up my machine. We will click the BROWSE button and navigate to where we put our ISO file we want to put on the USB drive. Obviously we are going to click NEXT and continue to select a USB Device (you can guess what the DVD button is for). Next we select the USB that we have plugged into one of our laptops USB ports. Then we click the BEGIN COPYING button and the first thing the program does is format our USB drive. Then it starts copying out files out of the ISO and constructing the USB as if it was a DVD. So now that the files are copying to the drive I’m going to warn you. We will error out here. This program was design for bootable ISO’s of which this one is NOT. No problem because what fails it the writing of the bootable data to the drive that isn’t there. No biggie…. Forget the STARTOVER button is even there and click the dialog’s CLOSE button and exit the program. Now go to Windows Explorer and navigate to the USB Device. You can now access everything and even add stuff to the drive. But for me I want to keep this drive for one purpose and that is to install VS2010 on various machines. So the only stuff I’ll add to this is a folder of notes on things on visual studio that I might want to put on other machines I’m installing VS2010 on to. So that is it. Have a nice day! The Ron

Read the article

Oracle Database 12c: Oracle Multitenant Option

- by hamsun

1. Why ? 2. What is it ? 3. How ? 1. Why ? The main idea of the 'grid' is to share resources, to make better use of storage, CPU and memory. If a database administrator wishes to implement this idea, he or she must consolidate many databases to one database. One of the concerns of running many applications together in one database is: ‚what will happen, if one of the applications must be restored because of a human error?‘ Tablespace point in time recovery can be used for this purpose, but there are a few prerequisites. Most importantly the tablespaces are strictly separated for each application. Another reason for creating separated databases is security: each customer has his own database. Therefore, there is often a proliferation of smaller databases. Each of them must be maintained, upgraded, each allocates virtual memory and runs background processes thereby wasting resources. Oracle 12c offers another possibility for virtualization, providing isolation at the database level: the multitenant container database holding pluggable databases. 2. What ? Pluggable databases are logical units inside a multitenant container database, which consists of one multitenant container database and up to 252 pluggable databases. The SGA is shared as are the background processes. The multitenant container database holds metadata information common for pluggable databases inside the System and the Sysaux tablespace, and there is just one Undo tablespace. The pluggable databases have smaller System and Sysaux tablespaces, containing just their 'personal' metadata. New data dictionary views will make the information available either on pdb (dba_views) or container level (cdb_views). There are local users, which are known in specific pluggable databases and common users known in all containers. Pluggable databases can be easily plugged to another multitenant container database and converted from a non-CDB. They can undergo point in time recovery. 3. How ? Creating a multitenant container database can be done using the database configuration assistant: There you find the new option: Create as Container Database. If you prefer ‚hand made‘ databases you can execute the command from a instance in nomount state: CREATE DATABASE cdb1 ENABLE PLUGGABLE DATABASE …. And of course this can also be achieved through Enterprise Manager Cloud. A freshly created multitenant container database consists of two containers: the root container as the 'rack' and a seed container, a template for future pluggable databases. There are 4 ways to create other pluggable databases: 1. Create an empty pdb from seed 2. Plug in a non-CDB 3. Move a pdb from another pdb 4. Copy a pdb from another pdb We will discuss option2: how to plug in a non_CDB into a multitenant container database. Three different methods are available : 1. Create an empty pdb and use Datapump in traditional export/import mode or with Transportable Tablespace or Database mode. This method is suitable for pre 12c databases. 2. Create an empty pdb and use GoldenGate replication. When the pdb catches up with the non-CDB, you fail over to the pdb. 3. Databases of Version 12c or higher can be plugged in with the help of the new dbms_pdb Package. This is a demonstration for method 3: Step1: Connect to the non-CDB to be plugged in and create an xml File with description of the database. The xml file is written to $ORACLE_HOME/dbs per default and contains mainly information about the datafiles. Step 2: Check if the non-CDB is pluggable in the multitenant container database: Step 3: Create the pluggable database, connected to the Multitenant container database. With nocopy option the files will be reused, but the tempfile is created anew: A service is created and registered automatically with the listener: Step 4: Delete unnecessary metadata from PDB SYSTEM tablespace: To connect to newly created pdb, edit tnsnames.ora and add entry for new pdb. Connect to plugged-in non_CDB and clean up Data Dictionary to remove entries now maintained in multitenant container database. As all kept objects have to be recompiled it will take a few minutes. Step 5: The plugged-in database will be automatically synchronised by creating common users and roles when opened the first time in read write mode. Step 6: Verify tablespaces and users: There is only one local tablespace (users) and one local user (scott) in the plugged-in non_CDB pdb_orcl. This method of creating plugged_in non_CDB from is fast and easy for 12c databases. The method for deplugging a pluggable database from a CDB is to create a new non_CDB and use the the new full transportable feature of Datapump and drop the pluggable database. About the Author: Gerlinde has been working for Oracle University Germany as one of our Principal Instructors for over 14 years. She started with Oracle 7 and became an Oracle Certified Master for Oracle 10g and 11c. She is a specialist in Database Core Technologies, with profound knowledge in Backup & Recovery, Performance Tuning for DBAs and Application Developers, Datawarehouse Administration, Data Guard and Real Application Clusters.

Read the article

Clean up after Visual Studio

- by psheriff

As programmer’s we know that if we create a temporary file during the running of our application we need to make sure it is removed when the application or process is complete. We do this, but why can’t Microsoft do it? Visual Studio leaves tons of temporary files all over your hard drive. This is why, over time, your computer loses hard disk space. This blog post will show you some of the most common places where these files are left and which ones you can safely delete..NET Left OversVisual Studio is a great development environment for creating applications quickly. However, it will leave a lot of miscellaneous files all over your hard drive. There are a few locations on your hard drive that you should be checking to see if there are left-over folders or files that you can delete. I have attempted to gather as much data as I can about the various versions of .NET and operating systems. Of course, your mileage may vary on the folders and files I list here. In fact, this problem is so prevalent that PDSA has created a Computer Cleaner specifically for the Visual Studio developer. Instructions for downloading our PDSA Developer Utilities (of which Computer Cleaner is one) are at the end of this blog entry.Each version of Visual Studio will create “temporary” files in different folders. The problem is that the files created are not always “temporary”. Most of the time these files do not get cleaned up like they should. Let’s look at some of the folders that you should periodically review and delete files within these folders.Temporary ASP.NET FilesAs you create and run ASP.NET applications from Visual Studio temporary files are placed into the <sysdrive>:\Windows\Microsoft.NET\Framework[64]\<vernum>\Temporary ASP.NET Files folder. The folders and files under this folder can be removed with no harm to your development computer. Do not remove the "Temporary ASP.NET Files" folder itself, just the folders underneath this folder. If you use IIS for ASP.NET development, you may need to run the iisreset.exe utility from the command prompt prior to deleting any files/folder under this folder. IIS will sometimes keep files in use in this folder and iisreset will release the locks so the files/folders can be deleted.Website CacheThis folder is similar to the ASP.NET Temporary Files folder in that it contains files from ASP.NET applications run from Visual Studio. This folder is located in each users local settings folder. The location will be a little different on each operating system. For example on Windows Vista/Windows 7, the folder is located at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\WebsiteCache. If you are running Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\Microsoft\WebsiteCache. Check these locations periodically and delete all files and folders under this directory.Visual Studio BackupThis backup folder is used by Visual Studio to store temporary files while you develop in Visual Studio. This folder never gets cleaned out, so you should periodically delete all files and folders under this directory. On Windows XP, this folder is located at <sysdrive>:\Documents and Settings\<UserName>\My Documents\Visual Studio 200[5|8]\Backup Files. On Windows Vista/Windows 7 this folder is located at <sysdrive>:\Users\<UserName>\Documents\Visual Studio 200[5|8]\.Assembly CacheNo, this is not the global assembly cache (GAC). It appears that this cache is only created when doing WPF or Silverlight development with Visual Studio 2008 or Visual Studio 2010. This folder is located in <sysdrive>:\ Users\<UserName>\AppData\Local\assembly\dl3 on Windows Vista/Windows 7. On Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\assembly. If you have not done any WPF or Silverlight development, you may not find this particular folder on your machine.Project AssembliesThis is yet another folder where Visual Studio stores temporary files. You will find a folder for each project you have opened and worked on. This folder is located at <sysdrive>:\Documents and Settings\<UserName>Local Settings\Application Data\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies on Windows XP. On Microsoft Vista/Windows 7 you will find this folder at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies.Remember not all of these folders will appear on your particular machine. Which ones do show up will depend on what version of Visual Studio you are using, whether or not you are doing desktop or web development, and the operating system you are using.SummaryTaking the time to periodically clean up after Visual Studio will aid in keeping your computer running quickly and increase the space on your hard drive. Another place to make sure you are cleaning up is your TEMP folder. Check your OS settings for the location of your particular TEMP folder and be sure to delete any files in here that are not in use. I routinely clean up the files and folders described in this blog post and I find that I actually eliminate errors in Visual Studio and I increase my hard disk space.NEW! PDSA has just published a “pre-release” of our PDSA Developer Utilities at http://www.pdsa.com/DeveloperUtilities that contains a Computer Cleaner utility which will clean up the above-mentioned folders, as well as a lot of other miscellaneous folders that get Visual Studio build-up. You can download a free trial at http://www.pdsa.com/DeveloperUtilities. If you wish to purchase our utilities through the month of November, 2011 you can use the RSVP code: DUNOV11 to get them for only $39. This is $40 off the regular price.NOTE: You can download this article and many samples like the one shown in this blog entry at my website. http://www.pdsa.com/downloads. Select “Tips and Tricks”, then “Developer Machine Clean Up” from the drop down list.Good Luck with your Coding,Paul Sheriff** SPECIAL OFFER FOR MY BLOG READERS **We frequently offer a FREE gift for readers of my blog. Visit http://www.pdsa.com/Event/Blog for your FREE gift!

Read the article

SQL Saturday #44 Huntington Beach Recap

What a great day. It was long and tiring, but rewarding in so many ways. On Sunday morning, I was driving home and I decided to take the Pacific Coast Highway from Huntington Beach. It was a great chance to exhale and just enjoy the sun and smells of the beach (I really love SoCal sometimes). And for future reference for all you speakers, the beach and ocean are only 5 minutes from the SQL Saturday location. I just could help noticing also the shocking number of high priced cars on the road (4 Bentleys, 3 Ferraris, 1 Aston Martins, 3 Maserati, 1 Rolls Royce, and 2 Lamborghinis). It made me think about this: Price of all those cars: $ 150,000+. Impacting the ability of people to learn: Priceless. We have positively impacted the education, knowledge, capabilities of not only our attendees, but also all of their companies and people they might help as well. That is just staggering and something to be immensely proud of. To all of my fellow community leaders, I salute you. So lets talk about the event Overall We had over 220 people register for the event and had 180+ people attend the event. I was shooting for the magical 200 number, but I guess it just gives us more motivation to make it even bigger and better next time. We had a few snags along the way, but what event doesnt, but I think everything turned out great. I did not hear any negative comments and heard lots of positive comments along with people asking when the next one is going to be (More on that later). Location- Golden West College We could not have asked for a better partner for the event. Herb Cohen from Golden West College was the wizard behind the curtains. From the beginning, he was our advocate to the GWC Board and was instrumental in getting our event approved. The day off, Herb was a HUGE help getting any and all logistics that we needed taken care of. In the craziness of the early morning registration crush it was a big help knowing that he and Bret Stateham (Blog | Twitter) were taking care of testing projectors in all the rooms. Anything we needed he was there and was even proactive in getting some things that I had not even thought of (i.e. a dumpster for all of our garbage). I cannot thank Herb enough along with other members of the GWC staff including Minnie Higgins of the Career and Technical Education Division office, Jack Taylor, public safety, and Ron Pryor, Tech Services Support. And last, but not least, the Wireless on campus was absolutely FANTASTIC! Some lessons learned Unless you are a glutton for punishment, as I no doubt am, you most certainly want to give yourself more than six weeks to plan the event. I am lucky that I have a very understanding wife and had a wonderful set of co-coordinators helping me out. A big thanks goes out to Phil, Marlon (Blog | Twitter), Nitin (Twitter), Thomas (Blog | Twitter), Bret (Blog | Twitter), Ben, and Laurie. Thankfully, the sponsor and speaker community was hugely supportive and we were able to fill out the entire event with speakers and sponsors. I have to say that there is not a lot that I would change after this years event. There are obviously going to be some things that we can do better or differently next time, but overall I think it was a great event and I was more than happy with the response we received from the community. Sponsors We obviously could not have put together our event without our sponsors. So certainly have to show them some love. Platinum Sponsors Quest Software http://www.quest.com My Space http://www.myspace.com/ Gold Strategy Companion http://www.strategycompanion.com Silver Fusion-IO http://www.fusionio.com Bronze WestClinTech http://westclintech.com Professional Association For SQL Server http://www.sqlpass.org Attunity http://www.attunity.com Sharepoint 360 http://www.sharepoint360.com Some additional Thanks Andy Warren (Blog | Twitter) Always there to answer my question and help out when I had some issues or questions with the website. The amount of work that he and everyone else put into SQL Saturday is very amazing. What a great gift to the community! Einstein Bros. Bagels They were our Breakfast Vendor and arrived perfectly on time with yummy bagels, sweets and most importantly coffee. Luccis Deli (http://www.luccisdeli.com) Luccis was out Lunch Vendor. They were great to work with and the food was excellent. They worked with us to give us a great price. Heard lots of great comments about the lunches. Definitely not your ordinary box lunch. Moving Forward Unfortunately, the work does not end after the event. We have a few things to clear up such as surveys, sponsor stuff, presentations uploaded to the website, expense reimbursement, stuff like that. Hopefully, all that should be cleared up within the next couple weeks. After that as a group we are going to get together and decide what our next steps are. We definitely want to keep some of the momentum that we are building as a SQL Community and channel that into future SQL Saturdays and other types of community events. In the meantime, for additional training be sure to check out your local User Group and PASS. San Diego SQL Server Users Group ( http://www.sdsqlug.org/home/index.cfm ) Orange County SQL Server Users Group ( http://www.sqloc.com/ ) L.A. SQL Server Users Group ( http://www.sql.la/ ) SQL PASS ( http://www.sqlpass.org/ ) 24 Hours of PASS ( http://www.sqlpass.org/24hours/2010/ ) So stay tuned, there will be more events to come in SoCal!!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Partition Wise Joins

- by jean-pierre.dijcks

Some say they are the holy grail of parallel computing and PWJ is the basis for a shared nothing system and the only join method that is available on a shared nothing system (yes this is oversimplified!). The magic in Oracle is of course that is one of many ways to join data. And yes, this is the old flexibility vs. simplicity discussion all over, so I won't go there... the point is that what you must do in a shared nothing system, you can do in Oracle with the same speed and methods. The Theory A partition wise join is a join between (for simplicity) two tables that are partitioned on the same column with the same partitioning scheme. In shared nothing this is effectively hard partitioning locating data on a specific node / storage combo. In Oracle is is logical partitioning. If you now join the two tables on that partitioned column you can break up the join in smaller joins exactly along the partitions in the data. Since they are partitioned (grouped) into the same buckets, all values required to do the join live in the equivalent bucket on either sides. No need to talk to anyone else, no need to redistribute data to anyone else... in short, the optimal join method for parallel processing of two large data sets. PWJ's in Oracle Since we do not hard partition the data across nodes in Oracle we use the Partitioning option to the database to create the buckets, then set the Degree of Parallelism (or run Auto DOP - see here) and get our PWJs. The main questions always asked are: How many partitions should I create? What should my DOP be? In a shared nothing system the answer is of course, as many partitions as there are nodes which will be your DOP. In Oracle we do want you to look at the workload and concurrency, and once you know that to understand the following rules of thumb. Within Oracle we have more ways of joining of data, so it is important to understand some of the PWJ ideas and what it means if you have an uneven distribution across processes. Assume we have a simple scenario where we partition the data on a hash key resulting in 4 hash partitions (H1 -H4). We have 2 parallel processes that have been tasked with reading these partitions (P1 - P2). The work is evenly divided assuming the partitions are the same size and we can scan this in time t1 as shown below. Now assume that we have changed the system and have a 5th partition but still have our 2 workers P1 and P2. The time it takes is actually 50% more assuming the 5th partition has the same size as the original H1 - H4 partitions. In other words to scan these 5 partitions, the time t2 it takes is not 1/5th more expensive, it is a lot more expensive and some other join plans may now start to look exciting to the optimizer. Just to post the disclaimer, it is not as simple as I state it here, but you get the idea on how much more expensive this plan may now look... Based on this little example there are a few rules of thumb to follow to get the partition wise joins. First, choose a DOP that is a factor of two (2). So always choose something like 2, 4, 8, 16, 32 and so on... Second, choose a number of partitions that is larger or equal to 2* DOP. Third, make sure the number of partitions is divisible through 2 without orphans. This is also known as an even number... Fourth, choose a stable partition count strategy, which is typically hash, which can be a sub partitioning strategy rather than the main strategy (range - hash is a popular one). Fifth, make sure you do this on the join key between the two large tables you want to join (and this should be the obvious one...). Translating this into an example: DOP = 8 (determined based on concurrency or by using Auto DOP with a cap due to concurrency) says that the number of partitions >= 16. Number of hash (sub) partitions = 32, which gives each process four partitions to work on. This number is somewhat arbitrary and depends on your data and system. In this case my main reasoning is that if you get more room on the box you can easily move the DOP for the query to 16 without repartitioning... and of course it makes for no leftovers on the table... And yes, we recommend up-to-date statistics. And before you start complaining, do read this post on a cool way to do stats in 11.

Read the article

How to Increase the VMWare Boot Screen Delay

- by Trevor Bekolay

If you’ve wanted to try out a bootable CD or USB flash drive in a virtual machine environment, you’ve probably noticed that VMWare’s offerings make it difficult to change the boot device. We’ll show you how to change these options. You can do this either for one boot, or permanently for a particular virtual machine. Even experienced users of VMWare Player or Workstation may not recognize the screen above – it’s the virtual machine’s BIOS, which in most cases flashes by in the blink of an eye. If you want to boot up the virtual machine with a CD or USB key instead of the hard drive, then you’ll need more than an eye’s-blink to press Escape and bring up the Boot Menu. Fortunately, there is a way to introduce a boot delay that isn’t exposed in VMWare’s graphical interface – you have to edit the virtual machine’s settings file (a .vmx file) manually. Editing the Virtual Machine’s .vmx Find the .vmx file that contains the settings for your virtual machine. You chose a location for this when you created the virtual machine – in Windows, the default location is a folder called My Virtual Machines in your My Documents folder. In VMWare Workstation, the location of the .vmx file is listed on the virtual machine’s tab. If in doubt, search your hard drive for .vmx files. If you don’t want to use Windows default search, an awesome utility that locates files instantly is Everything. Open the .vmx file with any text editor. Somewhere in this file, enter in the following line… save the file, then close out of the text editor: bios.bootdelay = 20000 This will introduce a 20 second delay when the virtual machine loads up, giving you plenty of time to press the Escape button and access the boot menu. The number in this line is just a value in milliseconds, so for a five second boot delay, enter 5000, and so on. Change Boot Options Temporarily Now, when you boot up your virtual machine, you’ll have plenty of time to enter one of the keystrokes listed at the bottom of the BIOS screen on boot-up. Press Escape to bring up the Boot Menu. This allows you to select a different device to boot from – like a CD drive. Your selection will be forgotten the next time you boot up this virtual machine. Change Boot Options Permanently When the BIOS screen comes up, press F2 to enter the BIOS Setup menu. Switch to the Boot tab, and change the ordering of the items by pressing the “+” key to move items up on the list, and the “-” key to move items down the list. We’ve switched the order so that the CD-ROM Drive boots first. Once you make this change permanent, you may want to re-edit the .vmx file to remove the boot delay. Boot from a USB Flash Drive One thing that is noticeably missing from the list of boot options is a USB device. VMWare’s BIOS just does not allow this, but we can get around that limitation using the PLoP Boot Manager that we’ve previously written about. And as a bonus, since everything is virtual anyway, there’s no need to actually burn PLoP to a CD. Open the settings for the virtual machine you want to boot with a USB drive. Click on Add… at the bottom of the settings screen, and select CD/DVD Drive. Click Next. Click the Use ISO Image radio button, and click Next. Browse to find plpbt.iso or plpbtnoemul.iso from the PLoP zip file. Ensure that Connect at power on is checked, and then click Finish. Click OK on the main Virtual Machine Settings page. Now, if you use the steps above to boot using that CD/DVD drive, PLoP will load, allowing you to boot from a USB drive! Conclusion We’re big fans of VMWare Player and Workstation, as they let us try out a ton of geeky things without worrying about harming our systems. By introducing a boot delay, we can add bootable CDs and USB drives to the list of geeky things we can try out. Download PLoP Boot Manager Similar Articles Productive Geek Tips How To Switch to Console Mode for Ubuntu VMware GuestHack: Turn Off Debug Mode in VMWare Workstation 6 BetaStart Your Computer More Quickly by Delaying the Startup of a Service in VistaEnable Hidden BootScreen in Windows VistaEnable Copy and Paste from Ubuntu VMware Guest TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error

Read the article

Visualising data a different way with Pivot collections

- by Rob Farley

Roger’s been doing a great job extending PivotViewer recently, and you can find the list of LobsterPot pivots at http://pivot.lobsterpot.com.au Many months back, the TED Talk that Gary Flake did about Pivot caught my imagination, and I did some research into it. At the time, most of what we did with Pivot was geared towards what we could do for clients, including making Pivot collections based on students at a school, and using it to browse PDF invoices by their various properties. We had actual commercial work based on Pivot collections back then, and it was all kinds of fun. Later, we made some collections for events that were happening, and even got featured in the TechEd Australia keynote. But I’m getting ahead of myself... let me explain the concept. A Pivot collection is an XML file (with .cxml extension) which lists Items, each linking to an image that’s stored in a Deep Zoom format (this means that it contains tiles like Bing Maps, so that the browser can request only the ones of interest according to the zoom level). This collection can be shown in a Silverlight application that uses the PivotViewer control, or in the Pivot Browser that’s available from getpivot.com. Filtering and sorting the items according to their facets (attributes, such as size, age, category, etc), the PivotViewer rearranges the way that these are shown in a very dynamic way. To quote Gary Flake, this lets us “see patterns which are otherwise hidden”. This browsing mechanism is very suited to a number of different methods, because it’s just that – browsing. It’s not searching, it’s more akin to window-shopping than doing an internet search. When we decided to put something together for the conferences such as TechEd Australia 2010 and the PASS Summit 2010, we did some screen-scraping to provide a different view of data that was already available online. Nick Hodge and Michael Kordahi from Microsoft liked the idea a lot, and after a bit of tweaking, we produced one that Michael used in the TechEd Australia keynote to show the variety of talks on offer. It’s interesting to see a pattern in this data: The Office track has the most sessions, but if the Interactive Sessions and Instructor-Led Labs are removed, it drops down to only the sixth most popular track, with Cloud Computing taking over. This is something which just isn’t obvious when you look an ordinary search tool. You get a much better feel for the data when moving around it like this. The more observant amongst you will have noticed some difference in the collection that Michael is demonstrating in the picture above with the screenshots I’ve shown. That’s because it’s been extended some more. At the SQLBits conference in the UK this year, I had some interesting discussions with the guys from Xpert360, particularly Phil Carter, who I’d met in 2009 at an earlier SQLBits conference. They had got around to producing a Pivot collection based on the SQLBits data, which we had been planning to do but ran out of time. We discussed some of ways that Pivot could be used, including the ways that my old friend Howard Dierking had extended it for the MSDN Magazine. I’m not suggesting I influenced Xpert360 at all, but they certainly inspired us with some of their posts on the matter So with LobsterPot guys David Gardiner and Roger Noble both having dabbled in Pivot collections (and Dave doing some for clients), I set Roger to work on extending it some more. He’s used various events and so on to be able to make an environment that allows us to do quick deployment of new collections, as well as showing the data in a grid view which behaves as if it were simply a third view of the data (the other two being the array of images and the ‘histogram’ view). I see PivotViewer as being a significant step in data visualisation – so much so that I feature it when I deliver talks on Spatial Data Visualisation methods. Any time when there is information that can be conveyed through an image, you have to ask yourself how best to show that image, and whether that image is the focal point. For Spatial data, the image is most often a map, and the map becomes the central mode for navigation. I show Pivot with postcode areas, since I can browse the postcodes based on their data, and many of the images are recognisable (to locals of South Australia). Naturally, the images could link through to the map itself, and so on, but generally people think of Spatial data in terms of navigating a map, which doesn’t always gel with the information you’re trying to extract. Roger’s even looking into ways to hook PivotViewer into the Bing Maps API, in a similar way to the Deep Earth project, displaying different levels of map detail according to how ‘zoomed in’ the images are. Some of the work that Dave did with one of the schools was generating the Deep Zoom tiles “on the fly”, based on images stored in a database, and Roger has produced a collection which uses images from flickr, that lets you move from one search term to another. Pulling the images down from flickr.com isn’t particularly ideal from a performance aspect, and flickr doesn’t store images in a small-enough format to really lend itself to this use, but you might agree that it’s an interesting concept which compares nicely to using Maps. I’m looking forward to future versions of the PivotViewer control, and hope they provide many more events that can be used, and even more hooks into it. Naturally, LobsterPot could help provide your business with a PivotViewer experience, but you can probably do a lot of it yourself too. There’s a thorough guide at getpivot.com, which is how we got into it. For some examples of what we’ve done, have a look at http://pivot.lobsterpot.com.au. I’d like to see PivotViewer really catch on a data visualisation tool.

Read the article

How to Automate your Database Documentation

- by Jonathan Hickford

In my previous post, “Automating Deployments with SQL Compare command line” I looked at how teams can automate the deployment and post deployment validation of SQL Server databases using the command line versions of Red Gate tools. In this post I’m looking at another use for the command line tools, namely using them to generate up-to-date documentation with every database change. There are many reasons why up-to-date documentation is valuable. For example when somebody new has to work on or administer a database for the first time, or when a new database comes into service. Having database documentation reduces the risks of making incorrect decisions when making changes. Documentation is very useful to business intelligence analysts when writing reports, for example in SSRS. There are a couple of great examples talking about why up to date documentation is valuable on this site: Database Documentation – Lands of Trolls: Why and How? and Database Documentation Using SQL Doc. The short answer is that it can save you time and reduce risk when you need that most! SQL Doc is a fast simple tool that automatically generates database documentation. It can create documents in HTML, Word or pdf files. The documentation contains information about object definitions and dependencies, along with any other information you want to associate with each object. The SQL Doc GUI, which is included in Red Gate’s SQL Developer Bundle and SQL Toolbelt, allows you to add additional notes to objects, and customise which objects are shown in the docs. These settings can be saved as a .sqldoc project file. The SQL Doc command line can use this project file to automatically update the documentation every time the database is changed, ensuring that documentation that is always up to date. The simplest way to keep documentation up to date is probably to use a scheduled task to run a script every day. However if you have a source controlled database, or are using a Continuous Integration (CI) server or a build server, it may make more sense to use that instead. If you’re using SQL Source Control or SSDT Database Projects to help version control your database, you can automatically update the documentation after each change is made to the source control repository that contains your database. To get this automation in place, you can use the functionality of a Continuous Integration (CI) server, which can trigger commands to run when a source control repository has changed. A CI server will also capture and save the documentation that is created as an artifact, so you can always find the exact documentation for a specific version of the database. This forms an always up to date data dictionary. If you don’t already have a CI server in place there are several you can use, such as the free open source Jenkins or the free starter editions of TeamCity. I won’t cover setting these up in this article, but there is information about using CI servers for automating database tasks on the Red Gate Database Delivery webpage. You may be interested in Red Gate’s SQL CI utility (part of the SQL Automation Pack) which is an easy way to update a database with the latest changes from source control. The PowerShell example below shows how to create the documentation from a database. That database might be your integration database or a shared development database that is always up to date with the latest changes. $serverName = "server\instance" $databaseName = "databaseName" # If you want to document multiple databases use a comma separated list $userName = "username" $password = "password" # Path to SQLDoc.exe $SQLDocPath = "C:\Program Files (x86)\Red Gate\SQL Doc 3\SQLDoc.exe" $arguments = @( "/server:$($serverName)", "/database:$($databaseName)", "/username:$($userName)", "/password:$($password)", "/filetype:html", "/outputfolder:.", # "/project:$args[0]", # If you already have a .sqldoc project file you can pass it as an argument to this script. Values in the project will be overridden with any options set on the command line "/name:$databaseName Report", "/copyrightauthor:$([Environment]::UserName)" ) write-host $arguments & $SQLDocPath $arguments There are several options you can set on the command line to vary how your documentation is created. For example, you can document multiple databases or exclude certain types of objects. In the example above, we set the name of the report to match the database name, and use the current Windows user as the documentation author. For more examples of how you can customise the report from the command line please see the SQL Doc command line documentation If you already have a .sqldoc project file, or wish to further customise the report by including or excluding specific objects, you can use this project on the command line. Any settings you specify on the command line will override the defaults in the project. For details of what you can customise in the project please see the SQL Doc project documentation. In the example above, the line to use a project is commented out, but you can uncomment this line and then pass a path to a .sqldoc project file as an argument to this script. Conclusion Keeping documentation about your databases up to date is very easy to set up using SQL Doc and PowerShell. By using a CI server to run this process you can trigger the documentation to be run on every change to a source controlled database, and keep historic documentation available. If you are considering more advanced database automation, e.g. database unit testing, change script generation, deploying to large numbers of targets and backup/verification, please email me at [email protected] for further script samples or if you have any questions.

Read the article

Big Data – What is Big Data – 3 Vs of Big Data – Volume, Velocity and Variety – Day 2 of 21

- by Pinal Dave

Data is forever. Think about it – it is indeed true. Are you using any application as it is which was built 10 years ago? Are you using any piece of hardware which was built 10 years ago? The answer is most certainly No. However, if I ask you – are you using any data which were captured 50 years ago, the answer is most certainly Yes. For example, look at the history of our nation. I am from India and we have documented history which goes back as over 1000s of year. Well, just look at our birthday data – atleast we are using it till today. Data never gets old and it is going to stay there forever. Application which interprets and analysis data got changed but the data remained in its purest format in most cases. As organizations have grown the data associated with them also grew exponentially and today there are lots of complexity to their data. Most of the big organizations have data in multiple applications and in different formats. The data is also spread out so much that it is hard to categorize with a single algorithm or logic. The mobile revolution which we are experimenting right now has completely changed how we capture the data and build intelligent systems. Big organizations are indeed facing challenges to keep all the data on a platform which give them a single consistent view of their data. This unique challenge to make sense of all the data coming in from different sources and deriving the useful actionable information out of is the revolution Big Data world is facing. Defining Big Data The 3Vs that define Big Data are Variety, Velocity and Volume. Volume We currently see the exponential growth in the data storage as the data is now more than text data. We can find data in the format of videos, musics and large images on our social media channels. It is very common to have Terabytes and Petabytes of the storage system for enterprises. As the database grows the applications and architecture built to support the data needs to be reevaluated quite often. Sometimes the same data is re-evaluated with multiple angles and even though the original data is the same the new found intelligence creates explosion of the data. The big volume indeed represents Big Data. Velocity The data growth and social media explosion have changed how we look at the data. There was a time when we used to believe that data of yesterday is recent. The matter of the fact newspapers is still following that logic. However, news channels and radios have changed how fast we receive the news. Today, people reply on social media to update them with the latest happening. On social media sometimes a few seconds old messages (a tweet, status updates etc.) is not something interests users. They often discard old messages and pay attention to recent updates. The data movement is now almost real time and the update window has reduced to fractions of the seconds. This high velocity data represent Big Data. Variety Data can be stored in multiple format. For example database, excel, csv, access or for the matter of the fact, it can be stored in a simple text file. Sometimes the data is not even in the traditional format as we assume, it may be in the form of video, SMS, pdf or something we might have not thought about it. It is the need of the organization to arrange it and make it meaningful. It will be easy to do so if we have data in the same format, however it is not the case most of the time. The real world have data in many different formats and that is the challenge we need to overcome with the Big Data. This variety of the data represent represent Big Data. Big Data in Simple Words Big Data is not just about lots of data, it is actually a concept providing an opportunity to find new insight into your existing data as well guidelines to capture and analysis your future data. It makes any business more agile and robust so it can adapt and overcome business challenges. Tomorrow In tomorrow’s blog post we will try to answer discuss Evolution of Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

The Year 2010, The Year of Change

As I look back on the year of 2010, I could have never predicted the wonderful changes that have occurred for my wife and me. The beginning of this year started out as the 9th year that we lived in South Florida, and my fourth year working for DentalPlans.com as a software engineer/network admin. About 3 months in to the year I was given an excellent opportunity to work for MovieTickets.com in the software engineering department. This opportunity allowed me to gain experience with jQuery due to one of my projects was to reengineering MovieTickets.com existing Marketing Panel System. About 3 months after working at MovieTickets.com, my wife and I were offered an opportunity of a life time. I was offered a Job in a large background\information security company located in Nashville, TN as software engineer II. I must note that after living in South Florida for 9 years, my wife and I really had a strong distaste for the South Florida life style and the general attitude/culture of the area. Even though we shared a strong dislike for the area in which we lived I must admit that it was a tough decision to leave MovieTickets.com because I was really doing well and I made some great new friends like Chris Catto, and Tyson Nero. In fact, they introduced me to Local Microsoft User Groups, and software development podcast like DotNetRocks.com and Hanselminutes.com. In addition, we also went to my first Microsoft launch down in Miami for Visual Studios 2010. I must admit it was a cool experience. I truly hope to keep in touch with them to see how their careers grow, and I know they will. I must admit I was nervous and excited to start the next chapter in our live as I started up the 26 foot U-Haul truck and got on the road for Nashville from Boca Raton. I knew that the change was going to lead to new adventures and new opportunities that I could never imagine. As we pulled in to the long driveway of our rental house, we knew that this was the right place for my wife and I. Natalie, my wife had actually come up to Nashville and within one week of my job offer had set up a nice rental home for us to restart our lives in TN. I must admit that the wonderful southern hospitality took a bit to get use to due to the type of people we were used to dealing with on a regular basis. Our first 2 months seemed like we were living a dream because of our new area and the wonderful people we live around. So far my new job is going really well and I really like the people on my team and department. In fact after 6 months I am now in charge of all application builds for our new deployment process. I am also leading up a push for setting up of continuous integration within our new build process. In addition to starting my new job, I was also offered a position as an adjust instructor at ITT Tech teaching course like VB.net, Java Script, Ajax, and database development. So far I have really like teaching at the college level. Information technology has really been great for my life so I am really glad to be able to give back. That is actually why I started DotNetBlocks. This site allows me to document things I have learned as I work with technology, and allows others to borrow from my experiences. I hope that this site can help others as others have helped me get where I am. Finally, I am glade to report that I only have 4 classes left for my master’s degree at Capella University. I am proud to announce that I am still on track to graduate with 3.91 GPA. This last class was really a test because I had a crazy idea that I could work full time as a software engineer, teach two college courses as a first time teacher and also take an advanced masters class in application architecture. I have no idea how I actually survived, but I am really surprised how well I actually did. I was invited back to reach again at ITT Tech, and I passed my masters class with an “A”. I have decided to take this next term off from my master’s program so that I do not get burned out. Also, so that my new current employer will pay for more of my education, tuition reimbursement is an awesome benefit. This was my year 2010, how was yours?

Read the article

Developer Training – Difficult Questions and Alternative Perspective – Part 3

- by pinaldave

Developer Training - Importance and Significance - Part 1 Developer Training – Employee Morals and Ethics – Part 2 Developer Training – Difficult Questions and Alternative Perspective - Part 3 Developer Training – Various Options for Developer Training – Part 4 Developer Training – A Conclusive Summary- Part 5 Congratulations! You are now a fully trained developer! You spent hours in a classroom, watching webinars, and reading materials. You are now more educated and more prepared than ever before. Now what? Stay or Quit The simple answer is that you now have two options – stay where you are or move on to a new job. Even though you might now be smarter than you have ever felt before, this can still be a tough decision to make. You feel extra trained and ready for a promotion or a raise, but you and your employer might not see eye to eye on this issue. The logical conclusion is to go on a job hunt, but that might not be the most ethical thing to do. Click Image to Enlarge Manager’s Perspective Click Image to Enlarge Try to see the issue from your manager’s perspective. You feel that you have just spent a lot of time and energy getting trained, and you should be rewarded. But they have invested their time and energy in you. They might see the training as a way to help you complete the goals they require from you, or as a way to help you complete tasks that will ultimately end in a reward or promotion. Moral Compass As in most cases, honesty is the best policy. Be open with your manager about your expectations, and ask them to explain their goals. When there is open and honest communication, everyone can walk away happy. If you’re unable to discuss with your manager for one reason or another, just try to keep the company policy in mind and follow your own moral compass. If all else fails, and your company is unwilling to make allowances for your new value, offer to pay the company back for the training before moving on your way. Whether you stay at your old job or move on to a new one, you are still faced with the question of what you’re going to do with all your new knowledge. If you feel comfortable, offer to train others around you who are interested in the same subject. This can look very good on your resume, and if you are working in a team environment it is sure to help you in the long run! What Next? You can even offer to train other trainers at the company – managers, those above you, or even report back to your original trainer about how your education is helping you in the work place. Obviously this should be completely voluntary on the trainer’s part. Taking advice from a “newbie” may not be their favorite idea, but it could also show the company that you are open to expanding your horizons and being helpful to everyone around you. Last in Line for Opportunity Click Image to Enlarge At this time, let us address a subject related to training and what to do with it – what if you are always overlooked for training? This can as thorny a problem as receiving training in the first place. The best advice is to let your supervisors know that you are always open to training and very interested in certain topics. If you are consistently passed over, be patient. Your turn will probably come, but the company as a whole has to focus on other problems at the moment. If you feel that there are more personal issues at play, be sure to bring this up with your supervisor in a calm and professional manager so that everything can be worked out best for both parties. You, Yourself and Your Future! If all else fails, offer to pay for training yourself. Perhaps money problems are at the root of being passed over. Even if there are other reasons, offering to pay your own way shows your dedication and could work out well for you in the long run. Always remember – in life you have to go out and make your own way, you cannot always sit and wait for things to land in your lap. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Developer Training, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

The way I think about Diagnostic tools

- by Daniel Moth

Every software has issues, or as we like to call them "bugs". That is not a discussion point, just a mere fact. It follows that an important skill for developers is to be able to diagnose issues in their code. Of course we need to advance our tools and techniques so we can prevent bugs getting into the code (e.g. unit testing), but beyond designing great software, diagnosing bugs is an equally important skill. To diagnose issues, the most important assets are good techniques, skill, experience, and maybe talent. What also helps is having good diagnostic tools and what helps further is knowing all the features that they offer and how to use them. The following classification is how I like to think of diagnostics. Note that like with any attempt to bucketize anything, you run into overlapping areas and blurry lines. Nevertheless, I will continue sharing my generalizations ;-) It is important to identify at the outset if you are dealing with a performance or a correctness issue. If you have a performance issue, use a profiler. I hear people saying "I am using the debugger to debug a performance issue", and that is fine, but do know that a dedicated profiler is the tool for that job. Just because you don't need them all the time and typically they cost more plus you are not as familiar with them as you are with the debugger, doesn't mean you shouldn't invest in one and instead try to exclusively use the wrong tool for the job. Visual Studio has a profiler and a concurrency visualizer (for profiling multi-threaded apps). If you have a correctness issue, then you have several options - that's next :-) This is how I think of identifying a correctness issue Do you want a tool to find the issue for you at design time? The compiler is such a tool - it gives you an exact list of errors. Compilers now also offer warnings, which is their way of saying "this may be an error, but I am not smart enough to know for sure". There are also static analysis tools, which go a step further than the compiler in identifying issues in your code, sometimes with the aid of code annotations and other times just by pointing them at your raw source. An example is FxCop and much more in Visual Studio 11 Code Analysis. Do you want a tool to find the issue for you with code execution? Just like static tools, there are also dynamic analysis tools that instead of statically analyzing your code, they analyze what your code does dynamically at runtime. Whether you have to setup some unit tests to invoke your code at runtime, or have to manually run your app (and interact with it) under the tool, or have to use a script to execute your binary under the tool… that varies. The result is still a list of issues for you to address after the analysis is complete or a pause of the execution when the first issue is encountered. If a code path was not taken, no analysis for it will exist, obviously. An example is the GPU Race detection tool that I'll be talking about on the C++ AMP team blog. Another example is the MSR concurrency CHESS tool. Do you want you to find the issue at design time using a tool? Perform a code walkthrough on your own or with colleagues. There are code review tools that go beyond just diffing sources, and they help you with that aspect too. For example, there is a new one in Visual Studio 11 and searching with my favorite search engine yielded this article based on the Developer Preview. Do you want you to find the issue with code execution? Use a debugger - let’s break this down further next. This is how I think of debugging: There is post mortem debugging. That means your code has executed and you did something in order to examine what happened during its execution. This can vary from manual printf and other tracing statements to trace events (e.g. ETW) to taking dumps. In all cases, you are left with some artifact that you examine after the fact (after code execution) to discern what took place hoping it will help you find the bug. Learn how to debug dump files in Visual Studio. There is live debugging. I will elaborate on this in a separate post, but this is where you inspect the state of your program during its execution, and try to find what the problem is. More from me in a separate post on live debugging. There is a hybrid of live plus post-mortem debugging. This is for example what tools like IntelliTrace offer. If you are a tools vendor interested in the diagnostics space, it helps to understand where in the above classification your tool excels, where its primary strength is, so you can market it as such. Then it helps to see which of the other areas above your tool touches on, and how you can make it even better there. Finally, see what areas your tool doesn't help at all with, and evaluate whether it should or continue to stay clear. Even though the classification helps us think about this space, the reality is that the best tools are either extremely excellent in only one of this areas, or more often very good across a number of them. Another approach is to offer a toolset covering all areas, with appropriate integration and hand off points from one to the other. Anyway, with that brain dump out of the way, in follow-up posts I will dive into live debugging, and specifically live debugging in Visual Studio - stay tuned if that interests you. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

Benefits of PerformancePoint Services Using SharePoint Server 2010

- by Wayne

What is PerformancePoint Services? Most of the time it happens that the metrics that make up your key performance indicators are not simple values from a data source. In SharePoint Server 2007 PerformancePoint Services, you could create two kinds of KPI metrics: Simple single value metrics from any supported data source or Complex multiple value metrics from a single Analysis Services data source using MDX. Now things are even easier with Performance Point Services in SharePoint 2010. Let us check what is it? PerformancePoint Services in SharePoint Server 2010 is a performance management service that you can use to monitor and analyze your business. By providing flexible, easy-to-use tools for building dashboards, scorecards, reports, and key performance indicators (KPIs), PerformancePoint Services can help everyone across an organization make informed business decisions that align with companywide objectives and strategy. Scorecards, dashboards, and KPIs help drive accountability. Integrated analytics help employees move quickly from monitoring information to analyzing it and, when appropriate, sharing it throughout the organization. Prior to the addition of PerformancePoint Services to SharePoint Server, Microsoft Office PerformancePoint Server 2007 functioned as a standalone server. Now PerformancePoint functionality is available as an integrated part of the SharePoint Server Enterprise license, as is the case with Excel Services in Microsoft SharePoint Server 2010. The popular features of earlier versions of PerformancePoint Services are preserved along with numerous enhancements and additional functionality. New PerformancePoint Services features PerformancePoint Services now can utilize SharePoint Server scalability, collaboration, backup and recovery, and disaster recovery capabilities. Dashboards and dashboard items are stored and secured within SharePoint lists and libraries, providing you with a single security and repository framework. New features and enhancements of SharePoint 2010 PerformancePoint Services • With PerformancePoint Services, functioning as a service in SharePoint Server, dashboards and dashboard items are stored and secured within SharePoint lists and libraries, providing you with a single security and repository framework. The new architecture also takes advantage of SharePoint Server scalability, collaboration, backup and recovery, and disaster recovery capabilities. You also can include and link PerformancePoint Services Web Parts with other SharePoint Server Web Parts on the same page. The new architecture also streamlines security models that simplify access to report data. • The Decomposition Tree is a new visualization report type available in PerformancePoint Services. You can use it to quickly and visually break down higher-level data values from a multi-dimensional data set to understand the driving forces behind those values. The Decomposition Tree is available in scorecards and analytic reports and ultimately in dashboards. • You can access more detailed business information with improved scorecards. Scorecards have been enhanced to make it easy for you to drill down and quickly access more detailed information. PerformancePoint scorecards also offer more flexible layout options, dynamic hierarchies, and calculated KPI features. Using this enhanced functionality, you can now create custom metrics that use multiple data sources. You can also sort, filter, and view variances between actual and target values to help you identify concerns or risks. • Better Time Intelligence filtering capabilities that you can use to create and use dynamic time filters that are always up to date. Other improved filters improve the ability for dashboard users to quickly focus in on information that is most relevant. • Ability to include and link PerformancePoint Services Web Parts together with other PerformancePoint Services Web parts on the same page. • Easier to author and publish dashboard items by using Dashboard Designer. • SQL Server Analysis Services 2008 support. • Increased support for accessibility compliance in individual reports and scorecards. • The KPI Details report is a new report type that displays contextually relevant information about KPIs, metrics, rows, columns, and cells within a scorecard. The KPI Details report works as a Web part that links to a scorecard or individual KPI to show relevant metadata to the end user in SharePoint Server. This Web part can be added to PerformancePoint dashboards or any SharePoint Server page. • Create analytics reports to better understand underlying business forces behind the results. Analytic reports have been enhanced to support value filtering, new chart types, and server-based conditional formatting. To conclude, PerformancePoint Services, by becoming tightly integrated with SharePoint Server 2010, takes advantage of many enterprise-level SharePoint Server 2010 features. Unfortunately, SharePoint Foundation 2010 doesn’t include this feature. There are still many choices in SharePoint family of products that include SharePoint Server 2010, SharePoint Foundation, SharePoint Server 2007 and associated free SharePoint web parts and templates.

Read the article

Sound vs. Valid Argument

- by MarkPearl

Today I spent some time reviewing my Formal Logic course for my up coming exam. I came across a section that I have never really explored in any proper depth… the difference between a valid argument and a sound argument. Here go some notes I made… What is an argument? In this case we are not referring to a verbal fight, but more what we call a set of premise followed by a conclusion. Before we go further we need to understand what a premise is… a premise is a statement that an argument claims will induce or justify a conclusion. Think of a premise as an assumption that something is true. So, an argument can consist of one or more premises and a conclusion… When is an argument valid? An argument can be either valid or invalid. An argument is valid if, and only if, it is impossible for there to be a situation in which all it's premises are TRUE and it's conclusion is FALSE. It is generally easier to determine if an argument is invalid. Do this by applying the following… Assume that all the premises are true, then ask yourself if it is now possible for the conclusion to be false. If the answer is "yes," the argument is invalid. If it's "no," the argument is valid. Example 1… P1 – Mark is Tall P2 – Mark is a boy C – Mark is a tall boy Walkthrough 1… Assume Mark is Tall is true and also assume that Mark is a boy. Based on these two premises, the conclusion is also true – Mark is a tall boy, thus the it is a valid argument. Let’s make this an invalid argument… Example 2… P1 – Mark is Tall P2 – Mark is a boy C – Mark is a short boy Walkthrough 2… This would be an invalid argument, since from the premises we assume that Mark is tall and he is a boy, and then the conclusion goes against this by saying that Mark is short. Thus an invalid argument. When is an argument sound? An argument is said to be sound when it is valid and all the premises are indeed true (not just assumed to be true). Rephrased, an argument is said to be sound when the conclusion will follow from the premises and the premises are indeed true in real life. In example 1 we were referring to a specific person, if we generalized it a bit we could come up with the following example. Example 3 P1 – All people called Mark are tall P2 – I know a specific person called Mark C – He is a tall person In this instance, it is a valid argument (we assume the premises are true, which leads to the conclusion being true), but the argument is NOT sound. In the real world there must be at least one person called Mark who is not tall. Something also to note, all invalid arguments are also unsound – this makes sense, if an argument is not valid, how on earth can it be true in the real world. What happens when the premises contradict themselves? This is an interesting one… An argument is valid if, and only if, it is impossible for there to be a situation in which all it's premises are TRUE and it's conclusion is FALSE. When premises are contradictory, the argument is always valid because it is impossible for all the premises to be true at one time. Lets look at an example.. P1 - Elvis is dead P2 – Elvis is alive C – Laura is a woolly mammoth This is a valid argument, but not a sound one. Think about it. Is it possible to have a situation in which the premises are true and the conclusion is false? Sure, it's possible to have a situation in which the conclusion is false, but for the argument to be invalid, it has to be possible for the premises to all be true at the same time the conclusion is false. So if the premises can't all be true, the argument is valid. (If you still think the argument is invalid, draw a picture in which the premises are all true and the conclusion is false. Remember, there's only one Elvis, and you can't be both dead and alive.) For more info on this I suggest reading the following blog post.

Read the article

Preview and Purchase Ebooks with Kindle for PC

- by Matthew Guay

Want to look over a new book, or buy it immediately in ebook format? Here’s how you can preview and purchase most new books from your PC the easy way. Most new books, including almost all New York Times Bestsellers, are available in ebook format from Amazon’s Kindle store. The Kindle store also includes numerous free ebooks, including out-of-print classics and a surprising amount of recent books. With the free Kindle for PC reader, you can read any of these ebooks without having to purchase a Kindle device. Preview Ebooks Before you Purchase Sometimes, it can be hard to know if you want to purchase a new book without reading some of it first. With Kindle for PC, however, you can download a sample of any ebook available for free. The sample usually includes the table of contents, forward or introduction, and often part or all of the first chapter. To get an ebook sample, find the book you want in the Kindle store (link below). Now, under the Try it free box, select the correct computer or device to send the sample to, and click Send Sample now. Amazon will thank you for your order, even though this is only a free preview. Click the Go to Kindle for PC button to open Kindle and read your ebook preview. Or, if Kindle is already running, press the Refresh button in the top right corner to check for new ebooks and previews. Kindle will synchronize and download the previews you selected. The most recently downloaded items show up on the top left. All sample books have a red “Sample” bar on the bottom of their cover, and they also include links to Buy or view more info about it on it’s cover. Double-click your sample to start reading it. Your ebook sample will usually open at the introduction or beginning of the first chapter, but you can also view the index, cover, and more. When you reach the end of the sample book, you can click a link to buy the book or view more details about it. Strangely, both of these links currently take you to the ebook’s page on Amazon.com, but perhaps in the future the Buy link will directly let you purchase the book. Or, you can also click Buy Now on a sample book directly from your Kindle library. If you clicked one of these links, you will be returned to the ebook’s page on Amazon. Choose the PC or Kindle you want the book delivered to, and this time, select Buy Now with 1-Click. Add your payment info if you’re not already setup for 1-Click Shopping, and then you’ll be shown the same Thank you page as before. Refresh Kindle for PC, and your new ebook will automatically download. Strangely, the sample ebook is not automatically removed, so you can right-click on the sample and select Delete this Book. Additionally, your last-read page in the sample is not synced to the purchased book, so you may have to find your place again. Now, enjoy your full ebook! Download Free Books for Kindle The Kindle Store has an amazing amount of free ebooks. Some free books may only be free for a limited time as a promotion, while others, such as old classics, may always be free. Either which way, once you download it, you can keep it forever. When you find a free ebook you want, select the Kindle or PC you want to download it to and click “Buy now with 1-Click”. Notice that this book shows it’s price is $0.00, but the button still says Buy now. Rest assured, if the book’s price show up as $0.00, you will not be charged anything for downloading it. Your ebook will download as usual after your next refresh. Note that you can still download the sample first if you want, but since the book is free, just download the whole thing and delete it if you don’t want it. Redownload your Purchased or Free Books If you install Kindle on a new PC or delete a book from your library, you can always re-download it from your Amazon account. Browse to the Manage your Kindle page on Amazon (link below) sign in with your Amazon account, and scroll down to the list of your purchased content. Select the book you wish to download, then choose the Kindle or PC you want to download it to and press Go. Note: There is a “Delete this title” button right below this. If you press the Delete button, you will not ever be able to re-download it. Or, you can download the book directly from the Archived Items tab in Kindle on your other PC. And, if you have your Kindle content on multiple computers, your reading will be synced via Whispersync. You can start reading on your desktop, and then resume where you left off from your laptop. Conclusion With these tips and tricks, it is much easier to preview and purchase new books, find and download free ebooks, and re-download any you’ve deleted from your PC. Have fun filling up your digital library! Links Manage your Kindle account Similar Articles Productive Geek Tips Read Mobi eBooks on Kindle for PCRead Kindle Books On Your Computer with Kindle for PCHow to See Where a TinyUrl Is Really Linking ToEdit Microsoft Word 2007 Documents in Print PreviewWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides

Search Results

Search found 59278 results on 2372 pages for 'time estimation'.

Page 524/2372 | < Previous Page | 520 521 522 523 524 525 526 527 528 529 530 531 | Next Page >

- by Bil Simser

- by Trevor Bekolay

- by Jim Giercyk

- by Matthew Guay

- by Mala Narasimharajan

- by Ajarn Mark Caldwell

- by pinaldave

- by Applications User Experience

- by Antoinette O'Sullivan

- by dwahlin

- by RonGarlit

- by hamsun

- by psheriff

- by jean-pierre.dijcks

- by Trevor Bekolay

- by Rob Farley

- by Jonathan Hickford

- by Pinal Dave

- by pinaldave

- by Daniel Moth

- by Wayne

- by MarkPearl

- by Matthew Guay

< Previous Page | 520 521 522 523 524 525 526 527 528 529 530 531 | Next Page >