Search Results

Search found 18096 results on 724 pages for 'let'.

Page 525/724 | < Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >

• Are these hardwares compatible?

  - by Tom Kaufmann

  I am trying to upgrade my new machine but I want to do it myself. This is my 1st attempt at building system. After carefully reading reviewing feedback and my budget I have decided to select the below listed components. Can anybody let me know are they compatible or not? Transcend 64 GB 2.5" SATA Solid State Drive Asus GeForce GTX550 1GB DDR5 ENGTX550 TI DI/1GD5 Graphics Card Seagate Barracuda 1 TB HDD Internal Hard Drive Cooler Master eXtreme Power Pro 600 Power Supply Intel Core i5 2500K Sandy Bridge 3.30 GHz 95 W 4 Core Desktop Processor Intel DX79TO Motherboard Corsair CMZ8GX3M2A1600C9 8 GB DDR3 SDRAM 1600 MHz Dual Channel Kit Desktop Memory Sony AD-7260S-ZS Internal DVD Writer - Black Cooler Master Hyper TX3 EVO Intel CPU Cooler Cooler Master Elite 335U Cabinet LG E2051T 20.1 Inch SuperSlim Monitor Is any of these hardware components incompatible with I5 2500K? If you have any other suggestions for selecting any other harwdware that can boost up my performance or lower my cost while having the same performance, please suggest. But my primary questions is whether they are compatible or not! Any help is appreciated. Thank you.

  Read the article

• Unable to mount iso as dvd drive in VMware Fusion 6

  - by John O

  I have a newer iMac without an optical drive and some DVDs that I needed to run software off of. This software will have you juggle discs to read data off of them, and the data can't simply be copied to the machine's drive. I used a windows machine to make ISOs of these DVDs. And the first disc, the installer, it will mount in VMware and let you install the software. It then asks for the other discs, and these won't mount as ISOs. If I mount them as drive images, they'll show up on the iMac's and I have access to all the files. But if I try to mount them as the dvd drive through Fusion, nothing happens. For that matter, I'm unable to attempt it a second time, as Fusion believes that the there is already an iso mounted as the dvd, while nothing has happened as far as the guest OS is concerned. drutil eject will allow me to eject the ghost/non-existent dvd, at which point I can make a second (equally futile) attempt. Does anyone have an explanation for this behavior? How can the ISO be valid enough to mount as a drive image, but not valid enough for Fusion to mount it as if it were a dvd?

  Read the article

• Installing Windows 8 to another computer with an OEM product Key

  - by user180671

  Questions come up after reading the article about the new method Microsoft uses to License windows 8 computers. Let say I bought a Brand new laptop with windows 8 preloaded. Not like the old way, there is no OEM sticker in the back of the computer which can be used for reloading system.(new product key is stored in BIOS as mentioned in the article, the key can be pulled out by using a software anyway). Is it possible to install windows 8 on another computer with that particular key in case the computer is totally damaged? Here is what i tried: First, I extracted the key with a software name "windows 8 key viewer". using the windows 8 upgrade tool to determine what copy of windows 8 I should download for the installation. The tool did correctly recognized the key as a legitimate one. but it claims that key can not be installed with a retail media (Since it is an oem key). Does this mean the only way to do it is to use an OEM CD from the manufacturer? Will ISO from MSDN source do? or it is just not possible??

  Read the article

• Strange Domain name under the same IP Address

  - by Mike Chip

  There's something really weird happening in my server. But first things first: I wanted to have my website and chose the domain name "myowndomain.com", Now on my domain registrar I point "myowndomain.com" to the address of my recently setup VPS, let's say 50.50.50.50 So I installed everything I needed to run my website, and I started to notice strange queries coming from different IP Addresses. Like these [client 123.123.123.123] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php [client 456.456.456.456] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php or like this (Really a long line, I cut some things) GET /?s=vod-show-id-22-area-%E5%85%B6%E4%BB%96-language-%E9%9F%A9%E8%AF%AD.html HTTP/1.1" 301 295 "http://v.strangedomain.com/?s=vod-s ...[cut]... spider" That above is happening the most. The 'strangedomain.com' returns the same IP address of my VPS which my website is hosted on. The whois of such domain shows it's registered to a chinese. But the street name didn't look so right (like a huge single word), so I think all of that info might be fake, but still might be a chinese. I also noticed that all 'clients' trying to access the 'strangedomain.com' is coming from china. If I type in the browser 'strangedomain.com', I see my website. I'm worried, because my website is actually an e-commerce. I don't know if 'strangedomain.com' WAS a website on 50.50.50.50 in the not so far past, or if it's something else.

  Read the article

• Reading log files from web application

  - by Egorinsk

  Hi! I want to write a small PHP application for monitoring logs on a Debian server, including syslog logs and Apache/PHP messages. The problem here is that Apache user (www-data) has no access to /var/log directory. What would be the best way to grant an access to logs for PHP application? Let's assume that log files can be really large, like hundreds of megabytes. I have some ideas: Write a shell script that would be run via sudo and tail last 512 Kb of log into a separate file that can be read by application - that's ineffective, because of forking a new process and having to read data twice Add www-data to adm group (that can read logs) - that's insecure Start a PHP process via cron every minute to read logs — that's not very good, because it doesn't allow real-time monitoring. Also, this script will be started even when I don't read logs, and consume CPU time (server is in the cloud, and I'll have to pay for it) Create a hardlink for all log files with lowered permissions - I guess, that won't work because logrotate could recreate log files and they'll change inode number. Start a separate nginx/Apache server under privileged user that may read logs. Maybe anyone got a better solution?

  Read the article

• LMDE detects a wireless card, but can't use it

  - by Davidos

  LMDE can see my wireless card, and correctly identifies it, but it refuses to let me turn it on through the shiny graphical interface. Is there a way to use the non-shiny terminal to turn on my wireless? One small tidbit I noticed was the stated version; it says the version is 00. I believe that's hexadecimal for 0, which may indicate something screwy with the software. It would be nice if someone could tell me how to figure out how to solve this kind of problem in the future. *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 00 serial: 91:e3:7b:0d:a3:a9 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-1-amd64 firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:e1d00000-e1d01fff I've tested multiple other network managers, and none of them work. W ireless switch is on, I'm sure it's a driver problem.

  Read the article

• Can a VM perform better when only two cores instead of four cores are presented to it?

  - by arcain

  We had a VMWare VM at work with two cores allocated to it that ran a pretty heinous process in IIS. Under load the process was maxing out the CPU usage on both cores, so we asked our system engineers to present the other two cores of the physical processor to the VM. The engineer immediately said that this would not improve performance at all, but would make the VM perform worse. That statement didn't make much sense to me, and I'm wondering how what the engineer said could be true. Are there actually cases where four cores presented to a VM would cause worse performance than two cores on the same physical hardware? Let's assume an ideal situation where there's only one VM on the host server, so nothing is being shared with other OS instances. I believe the physical server had a single quad core processor, and was most likely hosting multiple VMs. I don't really know what version of ESX was running on the host, nor do I know with certainty what the physical processor config was, but from within the VM I had access to, I saw two 3.33 GHz AMD processors. In the end, I never got to test the engineer's assertion out because (while we were trying to get the VM upgraded) we were able to optimize the process and reduce it's CPU consumption, and 2) we ended up migrating to a different VM on another ESX server which had four cores presented to it.

  Read the article

• Suggestions for transitioning to new GW/private network

  - by Quinten

  I am replacing a private T1 link with a new firewall device with an ipsec tunnel for a branch office. I am trying to figure out the right way to transition folks at the new site over to the new connection, so that they default to using the much faster tunnel. Existing network: 192.168.254.0/24, gw 192.168.254.253 (Cisco router plugged in to private t1) Test network I have been using with ipsec tunnel: 192.168.1.0/24, gw 192.168.1.1 (pfsense fw plugged in to public internet), also plugged in to same switch as the old network. There are probably ~20-30 network devices in the existing subnet, about 5 with static IPs. The remote endpoint is already the firewall--I can't set up redundant links to the existing subnet. In other words, as soon as I change the tunnel configuration to point to 192.168.254.0/24, all devices in the existing subnet will stop working because they point to the wrong gateway. I'd like some ability to do this slowly--such that I can move over a few clients and verify the stability of the new link before moving critical services or less tolerant users over. What's the right way to do this? Change the netmask on all of the devices to /16, and update gateway to point to the new device? Could this cause any problems? Also, how should I handle DNS? The pfsense box is not aware of my Active Directory environment. But if I change DNS to use the local servers, it will result in a huge slowdown as DNS queries will still be routed over the private t1. I need some help coming up with a plan that's not too disruptive but will really let me thoroughly test the stability of the IPSEC tunnel before I make the final switch. The AD version is 2008R2, as are the servers. Workstations are mostly Windows XP SP3. I have not configured the 192.168.1.0/24 as a site in AD sites and services.

  Read the article

• Need software to convert RAR to ZIP ("store" mode - no compression) * Extract->re-archive changes date/time attributes

  - by Larry78

  I have tried all of the following applications (download.cnet.com - the free ones), and none of them will convert an RAR archive to a ZIP, without compressing the files ("store" mode). 7-ZIP would be fine, too. [The RAR is a "solid" archive with password (I know it), files "stored" - no compression, used WinRAR 3.5.1] PeaZip, 7-Zip, FilZip, TugZip, SimplyZipSE, QuickZip, WinShrink. (A couple of the apps let you try, but the program gives an error - indicating how bad the software is. (Like "unknown header # #.") None of these apps will do the conversion at all. IZArc 4.1 comes the closest. It will convert an RAR to a ZIP, but it compresses the zip. There is a general preference setting to "store" - but it doesn't effect conversions. I don't want to extract the RAR files and re-archive them because I need to preserve the modified/created file attributes. IZArc preserves them, but it compresses the files. WinRAR has the option to convert archives, but I get the error "skipping encryped archive" when I try to convert it. It asks for the password first, and I know it's right because that password opens the archive, and I can read/view all the files in the archive.

  Read the article

• Windows 7 black screen after boot animation

  - by t_virus

  This is happening with my windows 7 64-bit install frequently. Today i was trying to install an icon pack. There was already a restore point prior to it so i didn't feel like create one. I replaced the following system files in both system32 and sysWOW64 imageres.dll imagesp1.dll zipfldr.dll and shell32.dll After a reboot i see windows boot animation and then a black screen (with no mouse) I let it like that for 10 minutes and the laptop automatically went to sleep mode. I wake it up and see an error box this error "interactive logon failed to initialize" I close it and i'm left with a black screen again, this time with a mouse though. I tried using automatic system repair. It just tells me to remove any extra hardware (i have none attached atm) System restore finishes successfully but doesn't fix the problem. Safe mode doesn't work either. same black screen after boot animation Can someone help me with this? Also, I'll be grateful anyone can upload those default files (listed above) for both system32 and sysWOW64 from a windows 7 64bit install (no service pack)

  Read the article

• exchange server 2010 with multiple domains

  - by air

  i have one exchange server 2010, which is working fine with one domain. my exchange is working as follows pop3 collector collect emails from one master catchall account and then deliver to exchange server, this working perfect. now what i want to add another domain to same exchange, i have added new domain as trusted domain & email policy and this new domain email account works fine with internal emails. now what i have done, i again forward new email account to same catchall account. but if i send email from any other external email address email is bounce, i can see email receive by pop3 collector but bounce by exchange server. to make you more clear let me explain logic on which i am working. i have 2 domains 1. domain1.com ([email protected]) 2. domain2.com ([email protected] -->[email protected]) now on my machine with exchange server i have pop3 collector which collect all emails from [email protected] and forward to exchange 2010 server. all emails to domain1.com is working perfect but when i send email to [email protected] this email redirect to [email protected] perfectly but when exchanger server receive this email, it bounce. i have also study the url link text and follow the whole process but no success. i also check that my DNS/MX is working fine as the bounce message is going from my exchange server. EDIT the only problem is with accepted domain, as email come to exchange server then bounce back. i just try this today i create one user called test, then i goto his properties -- email there was only one email account [email protected] i try to send email to [email protected] from internet (email bounce) then again i go to test user properties -- email and Add one email [email protected] again u try to send email to t*[email protected]* from internet (email received) i think the only problem is with accepted domain but in hub transport , it shows accepted is there any way to check does domain is properly accepted or not in exchange 2010 server. Thanks

  Read the article

• linux: per-process monitor, every 10 minutes, with history access

  - by Inbar Rose

  I really didn't know a better way to ask my question, hence you get a horribly named question. I will explain what i want to do, maybe that will help you help me. I would like to have my linux machine continuously monitor (every 10 minutes) all the processes on my machine. The information from each process that I require is the name, CPU usage, allocated (virtual) memory, and resident (ram) memory. If these periodic reports were to be looked at, they would look something like this: PROCESS CPU RAM VIRTUAL name1 % MB MB name2 % MB MB ...etc..etc These reports should be stored in such a way that I can access them at a later date by giving a date/time scope (range). For instance, if I want to see the history of my processes from 12:00:00 1.12.12 till 12:00:00 2.12.12 I can - and it should give me the history of the processes for every 10 minutes between those date/time borders. The format of the return is not important, that will be handled by a script anyway and can be modified into anything I need. I have looked into a few things so far, but have not found something that clearly meets my needs. Among the things i searched: sar, free(1), top(1).. and a few other things. It should be a simple issue, i can already see all this information by simply looking at my htop, but i need only a tool that will gather the desired fields for me for each processes every 10 minutes, and then also let me extract slices of that data based on date/time scopes (ranges). note: I have limited experience with linux, so please give detailed information. note2: The desired output will be something like this (after receiving the desired range) CPU USAGE BY PROCESS: proc_nameA 1,2,2,2,2,2...... numbers represent % usage every 10 minutes... proc_nameB 4,3,3,6,1,2...... The same idea with the other information.

  Read the article

• System Issues and Major Malfuctions after Failed hibernation Exit

  - by Sarah Seguin

  I have a HP G71-340US that went into hibernation mode for a while and when I tried coming out of it, I got an error message: You're computer cannot come out if hibernation . Status: 0xc000009a Info: A fatal error occurred processing the restoration data. File: \hiberfil.sys Any information that was not saved before the computer went into hybernation will be lost enter=continue So I hit continue and it ran soooo super slow it. It was seriously crawling. Finally I gave up and turned it off manually (IE press and hold the button). It's been a week or two since then and EVERY SINGLE TIME I have tried to to do ANYTHING it takes forever. When I say forever, I literally mean takes 5-7 minutes to load the internet, then the page itself, then to click a link, so on so forth. Eventually everything just goes not responding and I have to give up (4-6 HOURS later). I also cannot access my thumb/jump drives once I've managed to load windows. I was going to try runing malware bytes incase of a virus, but it's windows explorer developes errors and goes not responding on me. Currently I'm running scan disk or check disk and like every file is coming back unreadable. I let it run the last 2 hours straight in chkdesk and I'm only at 6 percent with around 500+ errors and still going. Yes, I've taken logs of the errors via cell phone camera and patience. A week or two prior to this happening I had to change our the hard drive due to blunt force trama next to the mouse. OH! Running on Windows 7: ) And I've tried loading the computer in safe mode and it makes absolutely no difference. Any and all help would be appreciated. I really don't know what to do from here and I'm kind of freaking out. I've googled different part of the error and things that I've done/seen and there are so many different answers/topics that I thought it best to just post the questions.

  Read the article

• Find out what fonts are being sent to a printer

  - by user38307

  I have an issue where two computers running XP and with identical print drivers have different behavior printing over parallel port to receipt printers. For one type of receipt, receipt printing is instant. For another kind printing is delayed by ten seconds on most machines but not on the other. This happens even if I swap out printers. I believe the delay is because this computer has a different set of fonts installed. (It is used for graphic design.) The printers have built-in fonts, and if you do not use one of the built-in fonts the printer has to build up an image in memory rather than just spitting out its fonts. For a particular kind of receipt with special fonts on a particular computer the computer is sending a font which the receipt printer does not have built in. My question is, is there a way to find out what fonts are being sent to the printer? This would let me narrow down what I need to modify in the Windows font folder. Thank you!

  Read the article

• Windows 7 VPN only works if I connect it to itself first

  - by user1799075

  Just so you have some detail, VPN request are port forwarded from a linksys router hosting the global static IP (to the world) to the windows 7 machine. The ports have been added to the OK list. I have the incoming VPN connection setup on win 7 but the only way it will work from anywhere outside the physical machine is if I connect from itself to itself first. For example, let's say my internal static IP is 10.0.0.50 and incoming VPN server connection IP is 10.0.0.80 (both on the same machine). I can't connect via VPN from anywhere unless I first VPN from the machines .50 address back to itself on the .80 address. Once I do that, I can connect form anywhere, even my phone. It's as if once the machine reboots it thinks it should block requests on .80 until .50 connects first. BitDefender antivirus/firewall is loaded (windows firewall is off) I don't see anywhere to exclude ports in the BitDefender control panel. Maybe this initial connection opens the ports and tags them as safe because the initial request came from the same machine? Any thoughts? It's driving me nuts and I'm sick of having to drive half way across town over to the server, try to get building access and do the initial connection. Please help

  Read the article

• Removing all traces of GNU java and openjdk and replacing with Sun JDK

  - by user61766

  I have installed latest Sun JDk. But when I do: java -version I still got OpenJDK version. So I completely removed OpenJDK. But now when I do: java -version I get even older GNU java 1.5 something libgcj. So I completely removed that too but it was asking to remove bunch of dependent apps like OpenOffice.org Writer etc. Even though I need the writer, I let it go because I do not want ever to see the face of any GNU java on my linux. So everything related to GNU java is removed. Luckily I am able to start Eclipse and it works fine and start normally (apparently using the installed Sun JDK which is what I want). But now when I run java -version I get bash: /usr/bin/java: No such file or directory Now what I need to do so that when I open any terminal window and enter java -version I should get Sun JDK version? Sun JDK is installed in /usr/java/jdk1.6.021. I also have symlinks: /usr/java/latest and /usr/java/defaults pointing to sun jdk.

  Read the article

• IIS_IUSRS cannot access files uploaded and created by Network Service - error 401.3

  - by Max

  Let me rephrase my question as I investigated further: The problem: I have a php script that is used to upload images on my windows webserver 2008. The files are created in the correct directory. The are created and owned by the user Network Service. Network Service has full access to the uploaded file. As soon as I try to access the uploaded file (mostly an image) via HTTP, I get an 401.3 not authorized error. Now, if I right-click on the not accessible image and grant IIS_IUSRS group read permissions via the security tab, the image can be accessed! By default IIS_IUSRS has NO access at all for the uploaded file. The directory containing the image files has the correct access rights set. But each file that is new uploaded to the directory is permitted for IIS_IUSRS. The question: How can I grant IIS_IUSRS by default access to the newly uploaded file? The appPool of the website has its identity set to its default, I also tried setting it to "networkIdentity" or so, but that did not work either.

  Read the article

• Urgent: how to deny read access to a ExecCGI directory

  - by Malvolio

  First, I can't believe that that isn't the default behavior. Second, yikes! I don't know how long my code's been hanging out there, with all sort of cool secret stuff, just waiting for some hacker who knows Apache better than I do. EDIT (and apology) Well, this is sort of embarrassing. Here's what happened: We had some Python scripts available to the web, at /aux/file.py, which were not surprisingly at /var/www/http/aux . Separately, we were running an app server and Apache proxies through at /servlets/. A contractor had constructed the WAR file by bundling up all the generated files including the Python files (which are in a directory also called aux, not surprisingly), so if you typed in /servlets/aux/file.py, the web-server would ask the app-server for it and the app-server would just supply the file. It was the latter URL that this morning I happened to type in by accident and lo, the source appeared. Until I realized the shear unlikelihood of what I had done, the situation was rating about 8.3 on the sphincter scale. After a tense half-hour or so I realized that it had nothing to do with the CGI (and that serving files that were also executable would be not only foolish but also impossible), and was able to address the real problems. So -- sorry, everybody. Let the scorn-fest commence.

  Read the article

• Issues with "There is already an object named 'xxx' in the database'

  - by Hoser

  I'm fairly new to SQL so this may be an easy mistake, but I haven't been able to find a solid solution anywhere else. Problem is whenever I try to use my temp table, it tells me it cannot be used because there is already an object with that name. I frequently try switching up the names, and sometimes it'll let me work with the table for a little while, but it never lasts for long. Am I dropping the table incorrectly? Also, I've had people suggest to just use a permanent table, but this database does not allow me to do that. create table #RandomTableName(NameOfObject varchar(50), NameOfCounter varchar(50), SampledValue decimal) select vPerformanceRule.ObjectName, vPerformanceRule.CounterName, Perf.vPerfRaw.SampleValue into #RandomTableName from vPerformanceRule, vPerformanceRuleInstance, Perf.vPerfRaw where (ObjectName like 'Processor' AND CounterName like '% Processor Time') OR(ObjectName like 'System' AND CounterName like 'Processor Queue Length') OR(ObjectName like 'Memory' AND CounterName like 'Pages/Sec') OR(ObjectName like 'Physical Disk' AND CounterName like 'Avg. Disk Queue Length') OR(ObjectName like 'Physical Disk' AND CounterName like 'Avg. Disk sec/Read') OR(ObjectName like 'Physical Disk' and CounterName like '% Disk Time') OR(ObjectName like 'Logical Disk' and CounterName like '% Free Space' AND SampleValue > 70 AND SampleValue < 100) order by ObjectName, SampleValue drop table #RandomTableName

  Read the article

• processing of Group Policy failed only on 2008 Servers and Name Resolution failure on the current domain controller

  - by Ken Wolfrom

  Spent last 3 months doing a upgrade from 2003 domain to a 2008R2 domain. our last DC was rebuilt (5 total) and brought up on line. After it was put on line we have some 2008 and 2008R2 servers (10 now) getting these errors in the event logs. ERRORS Description: The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following: a) Name Resolution failure on the current domain controller. b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).\ Can duplicate this if we drop to command prompt and run GPUPDATE manually When our users attempt to do a \directory\shared access to shared drive on an affected server get this error.– “THERE ARE CURRETLY NO LOGON SERVER AVAIALBE TO SERICE THE LOGON REQUEST. This is only affecting the 2008 OS and it is a random set of abotu 10 servers out of some 30 with this OS. The Services on the machines are running Ok and login. Able to log in with domain/user to the consoles and via RDP. WE can log onto an affected machine, and can get to the \domainname\sysvol and can see the GPO's Have checked the replication topology of the domain and it states all servers can replicate with no errrors. We went back to the last DC, demoted it, removed DNS and then removed it from the domain and waited 24 hours and issue still persist. Picked one server, removed it from domain, reboooted, and added back to domain with no problems, but still has this behavior. bottom line is we have some servers that the domain will not let any UDP/client server apps or GPO's process ,but the tcp related items seeme to work fine, http, tcp calls, sql and oracle dbs's connect and process. Any inputs on some possible reasons for this issue and fixes. It is only affecting the 2008 servers on a 2008R2 domain.

  Read the article

• Hungry hungry BIOS: why do I have less than 4 GiB of memory?

  - by Rhymoid

  I thought I had 4 GiB of memory, but just to be sure, let's ask the BIOS about that: ?: sudo dmidecode --type 20 # dmidecode 2.12 SMBIOS 2.6 present. Handle 0x000B, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x000A Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x000D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00080000000 Ending Address: 0x000FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x000C Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Alright, 4 GiB it is. But I can't use all of it: ?: cat /proc/meminfo | head -n 1 MemTotal: 3913452 kB Somehow, somewhere, I lost 274 MiB. Where did 6% of my memory go? Now I know the address ranges in DMI are incorrect, because the ACPI memory map reports usable ranges well beyond the ending address of the second memory module: ?: dmesg | grep -E "BIOS-e820: .* usable" [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dee7bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable I get pretty much the same info from /proc/iomem (except for the 4 kiB hole 0x000-0xFFF), which also shows that the kernel only accounts for less than 8 MiB. I guess 0x00000000-0x7FFFFFFF is indeed mapped to the first memory module, and 0x80000000-0xDFFFFFFF to part of the second memory module (a bunch of ACPI NVS things live between 0xDEE7C000 and 0xDEF30FFF, and the remaining 16-something MiB of that range are just 'reserved'). I guess the highest 0x18000000 bytes of the second memory module are mapped above the 4 GiB mark. But even then, there are two problems: 128 MiB (0x08000000 bytes, living somewhere between 0xE0000000 and 0xFFFFFFFF) are still completely unaccounted for. To note, my graphics card is on PCI-Express and (allegedly) has 1 GiB dedicated memory, so that shouldn't be the culprit. Did the BIOS screw up in moving the memory, leaving it partially shadowed by MMIO? Even with this mediocre explanation, I only 'found' 128 MiB. But /proc/meminfo is reporting a much larger deficit; where's the other 146 MiB? How does Linux count MemTotal?

  Read the article

• Where can someone store >100GB of pictures online? [closed]

  - by sbi

  A person who is not very computer-savvy needs to store 130GB of photos. The key parameters are: an non-negligible probability that the company selling the storage will be existing, and the data accessible, for at least five years data should be considered safe once uploaded reasonable terms of service: google drive reserving the right to literally do anything they want with their user's data is not acceptable; the possibility that the CIA might look at those pictures is not considered a threat easy to use from Windows, preferably as a drive no nerve-wracking limitations ("cannot upload 10GB/day" or "files 500MB" etc.) that serve no purpose other than pushing the user to the next-higher price plan some upgrade plan: there's currently 10-30GB of new photos per year, with a tendency to increase, which might bust a 150GB limit next January ability to somehow sort the pictures: currently they are sorted into folders, but something alike (tags) would be just as good, if easy enough to apply of course, the pricing is important (although there's a reason this is the last bullet; reasonable data safety is considered more important) Nice to have, but not necessary features would be: additional features related to photos (thumbnail generation, album sharing etc.) access from web and other platforms than Windows (smart phones) Let me stress this again: The person in need of that is able to copy pictures from the camera to the computer, can copy files in the explorer, and uses a web email service. That's about it, there's almost no understanding of what happens under the hood.

  Read the article

• Google Chrome on Linux not using ALSA for sound

  - by DarkMoon

  On my laptop, I've got an .asoundrc file that outputs sound to my USB headset. This works fine for SMplayer and Firefox. However, Google Chrome (at least, Flash-based and HTML5-based videos and HTML5-based audio in Chrome) plays through the laptop speakers instead. I've tried running Chrome from a command-line, hoping there would be some helpful output, but no such luck. I've tried looking through Google for whether Chrome even uses ALSA, or if it uses something else, but I have been unsuccessful in this. This question seems to be the same issue, but no suggestion was made. Anyone have any ideas? I'm running Gentoo with a 3.10.17 kernel, 1.0.27 ALSA utils, 2.6.5 FVWM, and 36.0.1985.143 Chrome. If you need more info, please let me know. EDIT: I've configured the USB headset as the default ALSA device. Volume levels for both headset and onboard are set and un-muted using alsamixer. My .asoundrc file is as follows. ctl.!default { type hw card Headset } pcm.dmixer { type dmix ipc_key 1024 slave { pcm { type hw card Headset } period_size 1024 buffer_size 4096 } bindings { 0 0 1 1 } } pcm.!default { type plug slave.pcm dmixer }

  Read the article

• Confused with creating an ODBC connection, apparently I have two separate odbcad32.exe files?

  - by Hoser

  Alright, this is my first time working with this so forgive me if I'm a little confusing or vague. I have a server with Windows Server 2008 Standard without Hyper-v (6.0, Build 6002). I'm running a small website off this server and using a Microsoft Access database to store some information coming in through the website. I'm sure the PHP I have written to open the ODBC connection is correct as it has worked for me when I created this website in a testing environment on a laptop. My current issue now is that it seems like I have two different odbcad32.exe's, and one doesn't appear to have a driver for a .accdb file, and only a .mdb file. The other has a driver for both. The first one I speak of has a driver titled 'Driver do Microsoft Access (.mdb)', the second one has a driver titled 'Microsoft Access Driver (.mdb, .accdb)'. I access the first odbcad32.exe by going to C:\Windows\SysWOW64\odbcad32.exe, and then the one that seems to have the driver I need I go to Control Panel-Administrative Tools-Data Sources(ODBC) and simply create a new connection in the System DNS tab. Whenever I make changes to the one that I access through the Control Panel, I see no changes, however if I use the odbcad32.exe file in SysWOW64 I do get some changes in the errors that come back to me. The main difference I noticed is that when I set up an ODBC connection with the Control Panel method it said it simply couldn't find the ODBC connection, but when I made a .mdb connection in the SysWOW64 one (and pointed it to a .accdb file) it says Cannot open database '(unknown)'. It may not be a database that your application recognizes, or the file may be corrupt. Which makes it seem like it is this odbcad32.exe version in SySWOW64 that is being recognized as the 'correct' one. Is there any way to fix this? I've tried to be as thorough as possible but if I've been confusing or left anything out let me know.

  Read the article

• Optimize Apache performance

  - by Phliplip

  I'm looking for ways to optimize our current web server hosted in-house. I'm trying to supply as much relevant information below. Please let me know if you would require additional information in order to assist. Server is running 1 single website, which is an online pizza ordering platform built on Zend Framework (ver1). On traffic stats from the last month aprox 6.000 pageloads per day, concentrated mainly around dinnertime. Around 1500 loads/hour peaks in that period. We recently upgraded from a 2/2mbit aDSL-line to 100/100mbit fiber, and we still have performance issues at dinner time. We assumed the 2mbit was the issue. Website is pretty snappy in low-load periods. Hardware CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.13-MHz K8-class CPU) Mem: 328M Active, 4427M Inact, 891M Wired, 244M Cache, 623M Buf, 33M Free Swap: 16G Total, 468K Used, 16G Free (6GB physical, 16GB swap) Filesystem Type Size Used Avail Capacity Mounted on /dev/ad7s1a ufs 4.8G 768M 3.7G 17% / devfs devfs 1.0K 1.0K 0B 100% /dev /dev/ad7s1g ufs 176G 5.2G 157G 3% /home /dev/ad7s1e ufs 4.8G 2.8M 4.5G 0% /tmp /dev/ad7s1f ufs 19G 3.5G 14G 19% /usr /dev/ad7s1d ufs 4.8G 550M 3.9G 12% /var Server OS FreeBSD 8.2-RELEASE Software apache-2.2.17 php5-5.3.8 mysql-server-5.5 Apache footprint (example, taken from # top) 31140 www 1 45 0 377M 41588K lockf 2 0:00 0.00% httpd 31122 www 1 44 0 375M 35416K lockf 2 0:00 0.00% httpd 31109 www 1 44 0 375M 38188K lockf 2 0:00 0.00% httpd 31113 www 1 44 0 375M 35188K lockf 2 0:00 0.00% httpd Apache is using the prefork MPM, APC (Alternative PHP Cache). SSL module is loaded, but not utilized (as in don't really work, thus not used). There is a file containing settings for MPM modules, but as i see it's not included in the httpd.conf file, the include line is commented out. Thus i would guess that the prefork MPM is working of default values too. Here are some other Apache conf values that i found - which are included in https.conf Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 UseCanonicalName Off HostnameLookups Off

  Read the article

< Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >