Search Results

Search found 23423 results on 937 pages for 'desktop management'.

Page 526/937 | < Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >

  • Install XP Mode with VirtualBox Using the VMLite Plugin

    - by Mysticgeek
    Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Install XP Mode with VirtualBox Using the VMLite Plugin

    - by Mysticgeek
    Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • How to Create Auto Playlists in Windows Media Player 12

    - by DigitalGeekery
    Are you getting tired of the same old playlists in Windows Media Player? Today we’ll show you how to create dynamic auto playlists based on criteria you choose in WMP 12 in Windows 7. Auto Playlists In Library view, click on Create playlist dropdown arrow and select Create auto playlist. On the New Auto Playlist window type in a name for the playlist in the text box. Now we need to choose our criteria by which to filter your playlist. Select Click here to add criteria. For our example, we will create a playlist of songs that were added to the library in the last week from the Alternative genre. So, we will first select Date Added from the dropdown list. Many criteria will have addition options to configure. In the example below you will see that we have a few options to fine tune.   We will filter all the songs added to the library in the last 7 days. We will select Is After from the first dropdown list. Then select Last 7 Days from the second dropdown list. You can add multiple criteria to further filter your playlist. If you can’t find the criteria you are looking for, select “More” at the bottom of the dropdown list.   This will pull up a filter window with all the criteria. Select a filter and then click OK when finished.   From the Genre dropdown, we will select Alternative. If you’d like to add Pictures, Videos, or TV Shows to your auto playlists you can do so by selecting them from the dropdown list under And also include. You will then be able to select criteria for your pictures, videos, or TV shows from the dropdown list.   Finally, you can also add restrictions to your music such as the number of items, duration, or total size. We will limit the duration of our playlist to one hour by selecting Limit Total Duration To… Then type in 1 hour…Click OK.   Our library is automatically filtered and a playlist is created based on the criteria we selected. When additional songs are added to the Windows Media Player library, any of new songs that fit the criteria will automatically be added to the New Songs playlist. You can also save a copy of an auto playlist as a regular playlist. Switch to Playlists view by clicking Playlists from either the top menu or the navigation bar. Select the Play tab and then click Clear list to remove any tracks from the list pane.   Right-click on the playlist you want to save, select Add to, and then Play list. The songs from your auto playlist will appear as an Unsaved list on the list pane. Click Save list. Type in a name for your playlist. Your auto playlist will continue to change as you add or remove items from your Media Player library that meet the criteria you established. The new saved playlist we just created will stay as it is currently. Editing a Auto playlist is easy. Right-click on the playlist and select Edit. Now you are ready to enjoy your playlist. Conclusion Auto playlists are great way to keep your playlists fresh in Windows Media Player 12. Users can get creative and experiment with the wide variety of criteria to customize their listening experience. If you are new to playlists in Windows Media Player, you may want to check our our previous post on how to create custom playlists in Windows Media Player 12. Are you looking to get better sound from WMP 12? Take a look at how to improve playback using enhancements in Windows Media Player 12. Similar Articles Productive Geek Tips Create Custom Playlists in Windows Media Player 12Fixing When Windows Media Player Library Won’t Let You Add FilesInstall and Use the VLC Media Player on Ubuntu LinuxMake Windows Media Player Automatically Open in Mini Player ModeMake VLC Player Look like Windows Media Player 10 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics Create Ringtones For Your Android Phone With RingDroid

    Read the article

  • Add Your Own Domain to Your WordPress.com Blog

    - by Matthew Guay
    Now that you’ve got a nice blog on WordPress.com, why not get your own domain to brand your site?  Here’s how you can easily register a new domain or move your existing domain to your WordPress site. By default, your free WordPress address is yourblog’sname.wordpress.com.  But whether this is a personal or a company blog, it can be nice to have your own domain to really brand your site and make it your own.  Or, if you already have another website and want to use WordPress as a blog for it, you could even add blog.yoursite.com or any other subdomain. Adding a domain to your WordPress.com is a paid upgrade; registering and mapping a new domain to your account costs $14.97 a year, while mapping a domain you already own to your WordPress blog costs $9.97 a year. Getting Started Login to your blog’s dashboard, click the arrow beside Upgrades in the sidebar, and select Domains. Enter the domain or subdomain you want to add to your site in the text box, and click Add domain to blog.   If you entered a new domain you want to register, WordPress will make sure the domain is available and then present you a registration form to register the domain.  Enter your information, and then click Register Domain.   Or, if you enter a domain that’s already registered, you will see the following prompt. If this domain is a domain you own, you can map it to WordPress.com.  Login to your domain registrar account and switch your nameserver to: NS1.WORDPRESS.COM NS2.WORDPRESS.COM NS3.WORDPRESS.COM Your DNS settings page for your domain may be different, depending on your registrar.  Here’s how our domain settings looked. Alternately, if you’re wanting to map a subdomain, such as blog.yoursite.com to your WordPress blog, create the following CNAME record on your domain register.  You may have to contact your domain registrar’s support to do this.  Substitute your subdomain, domain, and blog name when creating the record. subdomain.yourdomain.com. IN CNAME yourblog.wordpress.com. Once your settings are correct, click Try Again in your WordPress dashboard.  The DNS settings may take a while to update, but once WordPress can tell your DNS settings point to it, you will see the following confirmation screen.  Click Map Domain to add this domain to your WordPress blog. Now you’re ready to pay for your domain mapping or registration.  Depending on your purchase, the information and price shown may be different.  Here we’re mapping a domain we already have registered, so it costs $9.97.  Select your method of payment, enter your payment information or signin with your Paypal account, and continue as usual. Once your purchase is finished, you’ll be returned to the Domains page on WordPress.  Try going to your new domain, and make sure it opens your blog.  If it works, then click the bullet beside the new domain, and click Update Primary Domain.  Now, when people visit your WordPress site, they’ll see your new domain in the address bar.  You can still access your blog from your old yourname.wordpress.com address, but it will redirect to you new domain. Conclusion Having a personalized domain is a great way to make your blog more professional, while still taking advantage of the ease of use that WordPress.com offers.  And, if you have your own domain, you can easily move to your site traffic to a different hosting provider in the future if you need to.  The process is slightly complicated, but for $15/year we found this one of the best upgrades you could do to your WordPress.com blog. If you want to see an example of a site created with Wordpress, check out Matthew’s tech site techinch.com. And, if you’re just getting started with WordPress, check out our series on how to Start your WordPress.com blog, Personalize it, and Easily Post Content to it from anywhere. Similar Articles Productive Geek Tips Add Social Bookmarking (Digg This!) Links to your Wordpress BlogHow-To Geek SoftwareHow To Start Your Own Professional Blog with WordPressDisable Logon to Windows Computers When Not Connected to a DomainMake a Backup Copy of your Production Wordpress Blog on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule

    Read the article

  • SimpleMembership, Membership Providers, Universal Providers and the new ASP.NET 4.5 Web Forms and ASP.NET MVC 4 templates

    - by Jon Galloway
    The ASP.NET MVC 4 Internet template adds some new, very useful features which are built on top of SimpleMembership. These changes add some great features, like a much simpler and extensible membership API and support for OAuth. However, the new account management features require SimpleMembership and won't work against existing ASP.NET Membership Providers. I'll start with a summary of top things you need to know, then dig into a lot more detail. Summary: SimpleMembership has been designed as a replacement for traditional the previous ASP.NET Role and Membership provider system SimpleMembership solves common problems people ran into with the Membership provider system and was designed for modern user / membership / storage needs SimpleMembership integrates with the previous membership system, but you can't use a MembershipProvider with SimpleMembership The new ASP.NET MVC 4 Internet application template AccountController requires SimpleMembership and is not compatible with previous MembershipProviders You can continue to use existing ASP.NET Role and Membership providers in ASP.NET 4.5 and ASP.NET MVC 4 - just not with the ASP.NET MVC 4 AccountController The existing ASP.NET Role and Membership provider system remains supported as is part of the ASP.NET core ASP.NET 4.5 Web Forms does not use SimpleMembership; it implements OAuth on top of ASP.NET Membership The ASP.NET Web Site Administration Tool (WSAT) is not compatible with SimpleMembership The following is the result of a few conversations with Erik Porter (PM for ASP.NET MVC) to make sure I had some the overall details straight, combined with a lot of time digging around in ILSpy and Visual Studio's assembly browsing tools. SimpleMembership: The future of membership for ASP.NET The ASP.NET Membership system was introduces with ASP.NET 2.0 back in 2005. It was designed to solve common site membership requirements at the time, which generally involved username / password based registration and profile storage in SQL Server. It was designed with a few extensibility mechanisms - notably a provider system (which allowed you override some specifics like backing storage) and the ability to store additional profile information (although the additional  profile information was packed into a single column which usually required access through the API). While it's sometimes frustrating to work with, it's held up for seven years - probably since it handles the main use case (username / password based membership in a SQL Server database) smoothly and can be adapted to most other needs (again, often frustrating, but it can work). The ASP.NET Web Pages and WebMatrix efforts allowed the team an opportunity to take a new look at a lot of things - e.g. the Razor syntax started with ASP.NET Web Pages, not ASP.NET MVC. The ASP.NET Web Pages team designed SimpleMembership to (wait for it) simplify the task of dealing with membership. As Matthew Osborn said in his post Using SimpleMembership With ASP.NET WebPages: With the introduction of ASP.NET WebPages and the WebMatrix stack our team has really be focusing on making things simpler for the developer. Based on a lot of customer feedback one of the areas that we wanted to improve was the built in security in ASP.NET. So with this release we took that time to create a new built in (and default for ASP.NET WebPages) security provider. I say provider because the new stuff is still built on the existing ASP.NET framework. So what do we call this new hotness that we have created? Well, none other than SimpleMembership. SimpleMembership is an umbrella term for both SimpleMembership and SimpleRoles. Part of simplifying membership involved fixing some common problems with ASP.NET Membership. Problems with ASP.NET Membership ASP.NET Membership was very obviously designed around a set of assumptions: Users and user information would most likely be stored in a full SQL Server database or in Active Directory User and profile information would be optimized around a set of common attributes (UserName, Password, IsApproved, CreationDate, Comment, Role membership...) and other user profile information would be accessed through a profile provider Some problems fall out of these assumptions. Requires Full SQL Server for default cases The default, and most fully featured providers ASP.NET Membership providers (SQL Membership Provider, SQL Role Provider, SQL Profile Provider) require full SQL Server. They depend on stored procedure support, and they rely on SQL Server cache dependencies, they depend on agents for clean up and maintenance. So the main SQL Server based providers don't work well on SQL Server CE, won't work out of the box on SQL Azure, etc. Note: Cory Fowler recently let me know about these Updated ASP.net scripts for use with Microsoft SQL Azure which do support membership, personalization, profile, and roles. But the fact that we need a support page with a set of separate SQL scripts underscores the underlying problem. Aha, you say! Jon's forgetting the Universal Providers, a.k.a. System.Web.Providers! Hold on a bit, we'll get to those... Custom Membership Providers have to work with a SQL-Server-centric API If you want to work with another database or other membership storage system, you need to to inherit from the provider base classes and override a bunch of methods which are tightly focused on storing a MembershipUser in a relational database. It can be done (and you can often find pretty good ones that have already been written), but it's a good amount of work and often leaves you with ugly code that has a bunch of System.NotImplementedException fun since there are a lot of methods that just don't apply. Designed around a specific view of users, roles and profiles The existing providers are focused on traditional membership - a user has a username and a password, some specific roles on the site (e.g. administrator, premium user), and may have some additional "nice to have" optional information that can be accessed via an API in your application. This doesn't fit well with some modern usage patterns: In OAuth and OpenID, the user doesn't have a password Often these kinds of scenarios map better to user claims or rights instead of monolithic user roles For many sites, profile or other non-traditional information is very important and needs to come from somewhere other than an API call that maps to a database blob What would work a lot better here is a system in which you were able to define your users, rights, and other attributes however you wanted and the membership system worked with your model - not the other way around. Requires specific schema, overflow in blob columns I've already mentioned this a few times, but it bears calling out separately - ASP.NET Membership focuses on SQL Server storage, and that storage is based on a very specific database schema. SimpleMembership as a better membership system As you might have guessed, SimpleMembership was designed to address the above problems. Works with your Schema As Matthew Osborn explains in his Using SimpleMembership With ASP.NET WebPages post, SimpleMembership is designed to integrate with your database schema: All SimpleMembership requires is that there are two columns on your users table so that we can hook up to it – an “ID” column and a “username” column. The important part here is that they can be named whatever you want. For instance username doesn't have to be an alias it could be an email column you just have to tell SimpleMembership to treat that as the “username” used to log in. Matthew's example shows using a very simple user table named Users (it could be named anything) with a UserID and Username column, then a bunch of other columns he wanted in his app. Then we point SimpleMemberhip at that table with a one-liner: WebSecurity.InitializeDatabaseFile("SecurityDemo.sdf", "Users", "UserID", "Username", true); No other tables are needed, the table can be named anything we want, and can have pretty much any schema we want as long as we've got an ID and something that we can map to a username. Broaden database support to the whole SQL Server family While SimpleMembership is not database agnostic, it works across the SQL Server family. It continues to support full SQL Server, but it also works with SQL Azure, SQL Server CE, SQL Server Express, and LocalDB. Everything's implemented as SQL calls rather than requiring stored procedures, views, agents, and change notifications. Note that SimpleMembership still requires some flavor of SQL Server - it won't work with MySQL, NoSQL databases, etc. You can take a look at the code in WebMatrix.WebData.dll using a tool like ILSpy if you'd like to see why - there places where SQL Server specific SQL statements are being executed, especially when creating and initializing tables. It seems like you might be able to work with another database if you created the tables separately, but I haven't tried it and it's not supported at this point. Note: I'm thinking it would be possible for SimpleMembership (or something compatible) to run Entity Framework so it would work with any database EF supports. That seems useful to me - thoughts? Note: SimpleMembership has the same database support - anything in the SQL Server family - that Universal Providers brings to the ASP.NET Membership system. Easy to with Entity Framework Code First The problem with with ASP.NET Membership's system for storing additional account information is that it's the gate keeper. That means you're stuck with its schema and accessing profile information through its API. SimpleMembership flips that around by allowing you to use any table as a user store. That means you're in control of the user profile information, and you can access it however you'd like - it's just data. Let's look at a practical based on the AccountModel.cs class in an ASP.NET MVC 4 Internet project. Here I'm adding a Birthday property to the UserProfile class. [Table("UserProfile")] public class UserProfile { [Key] [DatabaseGeneratedAttribute(DatabaseGeneratedOption.Identity)] public int UserId { get; set; } public string UserName { get; set; } public DateTime Birthday { get; set; } } Now if I want to access that information, I can just grab the account by username and read the value. var context = new UsersContext(); var username = User.Identity.Name; var user = context.UserProfiles.SingleOrDefault(u => u.UserName == username); var birthday = user.Birthday; So instead of thinking of SimpleMembership as a big membership API, think of it as something that handles membership based on your user database. In SimpleMembership, everything's keyed off a user row in a table you define rather than a bunch of entries in membership tables that were out of your control. How SimpleMembership integrates with ASP.NET Membership Okay, enough sales pitch (and hopefully background) on why things have changed. How does this affect you? Let's start with a diagram to show the relationship (note: I've simplified by removing a few classes to show the important relationships): So SimpleMembershipProvider is an implementaiton of an ExtendedMembershipProvider, which inherits from MembershipProvider and adds some other account / OAuth related things. Here's what ExtendedMembershipProvider adds to MembershipProvider: The important thing to take away here is that a SimpleMembershipProvider is a MembershipProvider, but a MembershipProvider is not a SimpleMembershipProvider. This distinction is important in practice: you cannot use an existing MembershipProvider (including the Universal Providers found in System.Web.Providers) with an API that requires a SimpleMembershipProvider, including any of the calls in WebMatrix.WebData.WebSecurity or Microsoft.Web.WebPages.OAuth.OAuthWebSecurity. However, that's as far as it goes. Membership Providers still work if you're accessing them through the standard Membership API, and all of the core stuff  - including the AuthorizeAttribute, role enforcement, etc. - will work just fine and without any change. Let's look at how that affects you in terms of the new templates. Membership in the ASP.NET MVC 4 project templates ASP.NET MVC 4 offers six Project Templates: Empty - Really empty, just the assemblies, folder structure and a tiny bit of basic configuration. Basic - Like Empty, but with a bit of UI preconfigured (css / images / bundling). Internet - This has both a Home and Account controller and associated views. The Account Controller supports registration and login via either local accounts and via OAuth / OpenID providers. Intranet - Like the Internet template, but it's preconfigured for Windows Authentication. Mobile - This is preconfigured using jQuery Mobile and is intended for mobile-only sites. Web API - This is preconfigured for a service backend built on ASP.NET Web API. Out of these templates, only one (the Internet template) uses SimpleMembership. ASP.NET MVC 4 Basic template The Basic template has configuration in place to use ASP.NET Membership with the Universal Providers. You can see that configuration in the ASP.NET MVC 4 Basic template's web.config: <profile defaultProvider="DefaultProfileProvider"> <providers> <add name="DefaultProfileProvider" type="System.Web.Providers.DefaultProfileProvider, System.Web.Providers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" connectionStringName="DefaultConnection" applicationName="/" /> </providers> </profile> <membership defaultProvider="DefaultMembershipProvider"> <providers> <add name="DefaultMembershipProvider" type="System.Web.Providers.DefaultMembershipProvider, System.Web.Providers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" connectionStringName="DefaultConnection" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" applicationName="/" /> </providers> </membership> <roleManager defaultProvider="DefaultRoleProvider"> <providers> <add name="DefaultRoleProvider" type="System.Web.Providers.DefaultRoleProvider, System.Web.Providers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" connectionStringName="DefaultConnection" applicationName="/" /> </providers> </roleManager> <sessionState mode="InProc" customProvider="DefaultSessionProvider"> <providers> <add name="DefaultSessionProvider" type="System.Web.Providers.DefaultSessionStateProvider, System.Web.Providers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" connectionStringName="DefaultConnection" /> </providers> </sessionState> This means that it's business as usual for the Basic template as far as ASP.NET Membership works. ASP.NET MVC 4 Internet template The Internet template has a few things set up to bootstrap SimpleMembership: \Models\AccountModels.cs defines a basic user account and includes data annotations to define keys and such \Filters\InitializeSimpleMembershipAttribute.cs creates the membership database using the above model, then calls WebSecurity.InitializeDatabaseConnection which verifies that the underlying tables are in place and marks initialization as complete (for the application's lifetime) \Controllers\AccountController.cs makes heavy use of OAuthWebSecurity (for OAuth account registration / login / management) and WebSecurity. WebSecurity provides account management services for ASP.NET MVC (and Web Pages) WebSecurity can work with any ExtendedMembershipProvider. There's one in the box (SimpleMembershipProvider) but you can write your own. Since a standard MembershipProvider is not an ExtendedMembershipProvider, WebSecurity will throw exceptions if the default membership provider is a MembershipProvider rather than an ExtendedMembershipProvider. Practical example: Create a new ASP.NET MVC 4 application using the Internet application template Install the Microsoft ASP.NET Universal Providers for LocalDB NuGet package Run the application, click on Register, add a username and password, and click submit You'll get the following execption in AccountController.cs::Register: To call this method, the "Membership.Provider" property must be an instance of "ExtendedMembershipProvider". This occurs because the ASP.NET Universal Providers packages include a web.config transform that will update your web.config to add the Universal Provider configuration I showed in the Basic template example above. When WebSecurity tries to use the configured ASP.NET Membership Provider, it checks if it can be cast to an ExtendedMembershipProvider before doing anything else. So, what do you do? Options: If you want to use the new AccountController, you'll either need to use the SimpleMembershipProvider or another valid ExtendedMembershipProvider. This is pretty straightforward. If you want to use an existing ASP.NET Membership Provider in ASP.NET MVC 4, you can't use the new AccountController. You can do a few things: Replace  the AccountController.cs and AccountModels.cs in an ASP.NET MVC 4 Internet project with one from an ASP.NET MVC 3 application (you of course won't have OAuth support). Then, if you want, you can go through and remove other things that were built around SimpleMembership - the OAuth partial view, the NuGet packages (e.g. the DotNetOpenAuthAuth package, etc.) Use an ASP.NET MVC 4 Internet application template and add in a Universal Providers NuGet package. Then copy in the AccountController and AccountModel classes. Create an ASP.NET MVC 3 project and upgrade it to ASP.NET MVC 4 using the steps shown in the ASP.NET MVC 4 release notes. None of these are particularly elegant or simple. Maybe we (or just me?) can do something to make this simpler - perhaps a NuGet package. However, this should be an edge case - hopefully the cases where you'd need to create a new ASP.NET but use legacy ASP.NET Membership Providers should be pretty rare. Please let me (or, preferably the team) know if that's an incorrect assumption. Membership in the ASP.NET 4.5 project template ASP.NET 4.5 Web Forms took a different approach which builds off ASP.NET Membership. Instead of using the WebMatrix security assemblies, Web Forms uses Microsoft.AspNet.Membership.OpenAuth assembly. I'm no expert on this, but from a bit of time in ILSpy and Visual Studio's (very pretty) dependency graphs, this uses a Membership Adapter to save OAuth data into an EF managed database while still running on top of ASP.NET Membership. Note: There may be a way to use this in ASP.NET MVC 4, although it would probably take some plumbing work to hook it up. How does this fit in with Universal Providers (System.Web.Providers)? Just to summarize: Universal Providers are intended for cases where you have an existing ASP.NET Membership Provider and you want to use it with another SQL Server database backend (other than SQL Server). It doesn't require agents to handle expired session cleanup and other background tasks, it piggybacks these tasks on other calls. Universal Providers are not really, strictly speaking, universal - at least to my way of thinking. They only work with databases in the SQL Server family. Universal Providers do not work with Simple Membership. The Universal Providers packages include some web config transforms which you would normally want when you're using them. What about the Web Site Administration Tool? Visual Studio includes tooling to launch the Web Site Administration Tool (WSAT) to configure users and roles in your application. WSAT is built to work with ASP.NET Membership, and is not compatible with Simple Membership. There are two main options there: Use the WebSecurity and OAuthWebSecurity API to manage the users and roles Create a web admin using the above APIs Since SimpleMembership runs on top of your database, you can update your users as you would any other data - via EF or even in direct database edits (in development, of course)

    Read the article

  • xrdp and xfce4 Ubuntu 14.04 slow refreshrate

    - by Awatatah
    I am running Ubuntu 14.04 LTS 32bit and I am connecting via windows rdp to my ubuntu machine that has xrdp with xfce4 session. Network is 40mbps/5mbps. RDP to a windows machine from a windows machine is flawless from same location. I can connect fine, but the refresh rate is horrible. When it fist opens the desktop, the picture drags as seen in this image. The same thing happens when items are opened, closed, etc. Windows have the same effect. Sometimes up to 4 seconds before the image is rendered, depending on the image. Is there a setting to improve the refresh rate or something I can do to fix?

    Read the article

  • Custom Live CD using UCK

    - by phifer2088
    I am trying to create a custom live iso that I can place onto thumb drives for the purpose of using putty to program Cisco switches and routers. I have ubuntu 14.04 LTS installed on a laptop and also installed UCK. I used the desktop image for 14.04 and created a custom ISO. I was able to run terminal and install the putty application and add a new user. I added the new user to the dialout group so they could then access the serial port. I am not exactly where I want to be yet, but it is a start. I have loaded the ISO to a USB drive using netbootin, but it will not boot into the live cd for me to test that everything works the way I need in the image. Is this because of the image I used? Any help would be great. Thank you.

    Read the article

  • dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.

    - by Murphy
    murphy@murphy-Compaq-Presario-C700-Notebook-PC:~$ sudo apt-get install clipgrab [sudo] password for murphy: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. murphy@murphy-Compaq-Presario-C700-Notebook-PC:~$ sudo dpkg dpkg: error: need an action option Type dpkg --help for help about installing and deinstalling packages [*]; Use `dselect' or `aptitude' for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through `less' or `more' ! murphy@murphy-Compaq-Presario-C700-Notebook-PC:~$ am getting this error when i try to install clipgrab. please help

    Read the article

  • Complete Guide to Networking Windows 7 with XP and Vista

    - by Mysticgeek
    Since there are three versions of Windows out in the field these days, chances are you need to share data between them. Today we show how to get each version to be share files and printers with one another. In a perfect world, getting your computers with different Microsoft operating systems to network would be as easy as clicking a button. With the Windows 7 Homegroup feature, it’s almost that easy. However, getting all three of them to communicate with each other can be a bit of a challenge. Today we’ve put together a guide that will help you share files and printers in whatever scenario of the three versions you might encounter on your home network. Sharing Between Windows 7 and XP The most common scenario you’re probably going to run into is sharing between Windows 7 and XP.  Essentially you’ll want to make sure both machines are part of the same workgroup, set up the correct sharing settings, and making sure network discovery is enabled on Windows 7. The biggest problem you may run into is finding the correct printer drivers for both versions of Windows. Share Files and Printers Between Windows 7 & XP  Map a Network Drive Another method of sharing data between XP and Windows 7 is mapping a network drive. If you don’t need to share a printer and only want to share a drive, then you can just map an XP drive to Windows 7. Although it might sound complicated, the process is not bad. The trickiest part is making sure you add the appropriate local user. This will allow you to share the contents of an XP drive to your Windows 7 computer. Map a Network Drive from XP to Windows 7 Sharing between Vista and Windows 7 Another scenario you might run into is having to share files and printers between a Vista and Windows 7 machine. The process is a bit easier than sharing between XP and Windows 7, but takes a bit of work. The Homegroup feature isn’t compatible with Vista, so we need to go through a few different steps. Depending on what your printer is, sharing it should be easier as Vista and Windows 7 do a much better job of automatically locating the drivers. How to Share Files and Printers Between Windows 7 and Vista Sharing between Vista and XP When Windows Vista came out, hardware requirements were intensive, drivers weren’t ready, and sharing between them was complicated due to the new Vista structure. The sharing process is pretty straight-forward if you’re not using password protection…as you just need to drop what you want to share into the Vista Public folder. On the other hand, sharing with password protection becomes a bit more difficult. Basically you need to add a user and set up sharing on the XP machine. But once again, we have a complete tutorial for that situation. Share Files and Folders Between Vista and XP Machines Sharing Between Windows 7 with Homegroup If you have one or more Windows 7 machine, sharing files and devices becomes extremely easy with the Homegroup feature. It’s as simple as creating a Homegroup on on machine then joining the other to it. It allows you to stream media, control what data is shared, and can also be password protected. If you don’t want to make your Windows 7 machines part of the same Homegroup, you can still share files through the Public Folder, and setup a printer to be shared as well.   Use the Homegroup Feature in Windows 7 to Share Printers and Files Create a Homegroup & Join a New Computer To It Change which Files are Shared in a Homegroup Windows Home Server If you want an ultimate setup that creates a centralized location to share files between all systems on your home network, regardless of the operating system, then set up a Windows Home Server. It allows you to centralize your important documents and digital media files on one box and provides easy access to data and the ability to stream media to other machines on your network. Not only that, but it provides easy backup of all your machines to the server, in case disaster strikes. How to Install and Setup Windows Home Server How to Manage Shared Folders on Windows Home Server Conclusion The biggest annoyance is dealing with printers that have a different set of drivers for each OS. There is no real easy way to solve this problem. Our best advice is to try to connect it to one machine, and if the drivers won’t work, hook it up to the other computer and see if that works. Each printer manufacturer is different, and Windows doesn’t always automatically install the correct drivers for the device. We hope this guide helps you share your data between whichever Microsoft OS scenario you might run into! Here are some other articles that will help you accomplish your home networking needs: Share a Printer on a Home Network from Vista or XP to Windows 7 How to Share a Folder the XP Way in Windows Vista Similar Articles Productive Geek Tips Delete Wrong AutoComplete Entries in Windows Vista MailSvchost Viewer Shows Exactly What Each svchost.exe Instance is DoingFixing "BOOTMGR is missing" Error While Trying to Boot Windows VistaShow Hidden Files and Folders in Windows 7 or VistaAdd Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

    Read the article

  • OpenGL or OpenGL ES

    - by zxspectrum
    What should I learn? OpenGL 4.1 or OpenGL ES 2.0? I will be developing desktop applications using Qt but I may start developing mobile applications in a few months, too. I don't know anything about 3D, 3D math, etc and I'd rather spend 100 bucks in a good book than 1 week digging websites and going through trial and error. One problem I see with OpenGL 4.1 is as far as I know there is no book yet (the most recent ones are for OpenGL 3.3 or 4.0), while there are books on OpenGL ES 2.0. On the other hand, from my naive point of view, OpenGL 4.1 seems like OpenGL ES 2.0 + additions, so it looks like it would be easier/better to first learn OpenGL ES 2.0, then go for the shader language, etc Please, don't tell me to use NeHe (it's generally agreed it's full of bad/old practices), the Durian tutorial, etc. Thanks

    Read the article

  • XNA Notes 009

    - by George Clingerman
    This past week the MVPs (myself included) were on Microsoft campus for the MVP summit. So I apologize in advance if you did something cool or heard of something cool happening with XNA and XBLIGs and it’s not in my notes. I did my best to stay on top of things, but honestly this community is fast and furious with what it’s doing and creating. I really can’t keep up and that’s fantastic! But here’s what I *did* notice while I was there on Microsoft Campus (and I did make sure to point out to the XNA team several of these very cool happenings while I had their ears). Time Critical XNA News: The XNA team wants you to know that Dream Build Play registration is now open! http://blogs.msdn.com/b/xna/archive/2011/02/28/registration-now-open-for-dream-build-play-2011-challenge.aspx Join the XNA-UK create on March 24, 2011 at the Microsoft Tech Days Conference http://xna-uk.net/blogs/darkgenesis/archive/2011/02/27/join-the-xna-uk-crew-at-the-microsoft-tech-days-conference-on-24th-march-2011.aspx XNA Team: Shawn Hargreaves shares one of the coolest things that’s happened in the XNA community http://blogs.msdn.com/b/shawnhar/archive/2011/03/02/xbox-indies-pivot-view.aspx Nick Gravelyn continues his unique marketing/work prioritization strategy as he tries to get to 5,000 Pixel Man users before he makes Pixel Man 2 (and he’s almost there!) http://nickgravelyn.com/pixelman2/ XNA MVPs: A lot of the XNA MVPs were at the Microsoft MVP Summit 2011. Due to NDAs, most things can’t be shared, but I’m sure if you’re curious you could ask them about the general vibe and feeling they got from the team and the future of XNA/XBLIG and more. Catalin Zima and team release the free WP7 game Chickens Can Dream http://twitter.com/CatalinZima/statuses/41174062923390976 http://www.amusedsloth.com/2011/02/chickens-can-dream-is-live/ Charles Humphrey (NemoKrad) posts his March talk source and PowerPoint http://xna-uk.net/blogs/randomchaos/archive/2011/03/04/march-2011-talk-post-processing-framework.aspx XNA Developers: Michael B. McLaughlin posts about ANTS Memory Profile and creates a CheckMemoryAllocationGame sample (extremely useful if you’re looking to see how much memory some operation allocates!) http://geekswithblogs.net/mikebmcl/archive/2011/02/28/ants-memory-profiler-7.0-review.aspx http://geekswithblogs.net/mikebmcl/archive/2011/03/01/checkmemoryallocationgame-sample.aspx Andy Schatz (2009 IGF winner for Monaco) talking XNA at GDC 2011 http://www.gamasutra.com/view/news/33313/GDC_2011_Andy_Schatz_Ill_Make_My_Last_Game_When_I_Die.php Xbox LIVE Indie Games (XBLIG): Clover: A Curious Tale by BinaryTweed is coming as a Deal of the Week during St. Patricks Day http://majornelson.com/archive/2011/03/03/comingsoontothexboxlivemarketplacemarchthird.aspx Ska Studios away at GDC but still very post happy as always http://www.ska-studios.com/2011/03/02/swamped-picture-pack/ http://www.ska-studios.com/2011/02/28/the-february-showcase/ http://www.ska-studios.com/2011/02/25/good-morning-gato-51-smelling-the-roses/ Just Press Start interviews Matthew Mikuszewski of Darkwind Media about Blocks Indie http://justpressstart.net/?p=516 Gamergeddon Xbox Indie Game Round Up - February 27th http://www.gamergeddon.com/2011/02/27/xbox-indie-game-round-up-february-27th/ http://www.gamergeddon.com/category/xbox-360/indie-games/ GameMarx does a round up of all the Xbox Live Indie Game podcasts that are currently available http://www.gamemarx.com/news/2011/02/27/xbox-live-indie-game-podcasts.aspx GameMarx episode 11 http://www.gamemarx.com/video/the-show/26/ep-11-february-25-2011.aspx In perhaps what I feel is the most exciting news I’ve heard all week, Michael C. Neel (ViNull of GameMarx fame) re-launch XboxIndies.com! http://www.gamemarx.com/news/2011/03/01/the-relaunch-of-xboxindies-com.aspx http://xboxindies.com/ Armless Octopus shares a little of what they heard from Luke Schneider of Radiangames during his GDC 2011 talk http://www.armlessoctopus.com/2011/03/02/gdc-2011-luke-schneider-offers-insight-into-radiangames-success/ VVGindiecast Episode 1 with guests Derek Strickland(Mr_Deeke), Kris Steele(Kriswd40 from FunInfused Games) and Dave Voyles(From armlessoctopus.com) http://vvgtv.com/2011/02/25/vvgindiecast-xblig-podcast/ If you’re doing Xbox LIVE Indie Game Reviews get in touch with XboxIndies.com to get into their aggregated feed http://forums.create.msdn.com/forums/p/76931/467189.aspx#467189 B.U.T.T.O.N and Flotilla represented XNA very well at the Independent Games Festival (are there any more games entered that were created using XNA? Stand up and be heard!) http://www.igf.com/php-bin/entry2011.php?id=374 Armless Ocotopus interview at GDC 2011 with Soulcaster creator Ian Stocker http://www.armlessoctopus.com/2011/03/04/gdc-2011-interview-with-soulcaster-creator-ian-stocker/ MommysBestGames gets a nod in the DarkBasic newsletter where it features the Explosionade Editor (just do a search for Explosionade to get to the interesting bits!) http://www.thegamecreators.com/pages/newsletters/newsletter_issue_98.html You may be hearing the cries of FortressCraft (coming soon to XBLIG) being so wrong for stealing the idea from MineCraft. But did you know the the game MineCraft started from was an XNA game called Infiniminer? XNA is getting it’s fingers into EVERYTHING! http://www.minecraftwiki.net/wiki/Infiniminer XNA Development: TorqueX is NOT dead thanks to the tremendous efforts of the XNA Community working on the CEV (special thanks to @PinoEire for all his hard work on making that happen!) http://www.garagegames.com/community/blogs/view/20878 http://torquecev.com/ Dave Henry has posted XNA 3.x adding platformer start kit to the network game state management on his new site http://twitter.com/#!/mort8088/status/43407715908853760 http://mort8088.com/2011/03/03/xna-3-x-adding-platformer-starter-kit-to-network-game-state-management/ Mark Bamford releases XNAViewer 4.0, great for running XNA games inside of a Windows Form (for building level editors, etc.) http://twitter.com/#!/xzodia04/status/43466830412660736 http://xnaviewer.codeplex.com/ Unit testing an XNA game with Resharper and NUnit http://smnbss.wordpress.com/2011/02/28/planetx-unit-testing-an-xna-game-with-resharper-and-nunit-wp7-xbox-xna/ XNA for Silverlight developers: Part 5 - Input (touch + gestures) http://ht.ly/1bxwUE Mike McLaughlin shares a link he stumbled across for those looking to understand vector and matrix math http://twitter.com/#!/mikebmcl/status/42587074725036032 http://chortle.ccsu.edu/VectorLessons/vectorIndex.html DigitalRune Resources Pooling in XNA (Part 1) http://www.digitalrune.com/Support/Blog/tabid/719/EntryId/84/DigitalRune-Helper-Library-Resource-Pooling-in-XNA-Part-1.aspx JohnK “bobthecbuilder” released a new SunBurn Update that lowers the requirements for Windows Games http://twitter.com/#!/bobthecbuilder/status/43457306578522112 http://www.synapsegaming.com/blogs/johnk/archive/2011/03/03/sunburn-update-windows-redistributable.aspx Quick update on the Indiefreaks Game Framework v0.4 development status http://indiefreaks.com/2011/03/04/quick-update-on-igf-v0-4-development/

    Read the article

  • Our Look at the Internet Explorer 9 Platform Preview

    - by Asian Angel
    Have you been hearing all about Microsoft’s work on Internet Explorer 9 and are curious about it? If you are wanting a taste of the upcoming release then join us as we take a look at the Internet Explorer 9 Platform Preview. Note: Windows Vista and Server 2008 users may need to install a Platform Update (see link at bottom for more information). Getting Started If you are curious about the systems that the platform preview will operate on here is an excerpt from the FAQ page (link provided below). There are two important points of interest here: The platform preview does not replace your regular Internet Explorer installation The platform preview (and the final version of Internet Explorer 9) will not work on Windows XP There really is not a lot to the install process…basically all that you will have to deal with is the “EULA Window” and the “Install Finished Window”. Note: The platform preview will install to a “Program Files Folder” named “Internet Explorer Platform Preview”. Internet Explorer 9 Platform Preview in Action When you start the platform preview up for the first time you will be presented with the Internet Explorer 9 Test Drive homepage. Do not be surprised that there is not a lot to the UI at this time…but you can get a good idea of how Internet Explorer will act. Note: You will not be able to alter the “Homepage” for the platform preview. Of the four menus available there are two that will be of interest to most people…the “Page & Debug Menus”. If you go to navigate to a new webpage you will need to go through the “Page Menu” unless you have installed the Address Bar Mini-Tool (shown below). Want to see what a webpage will look like in an older version of Internet Explorer? Then choose your version in the “Debug Menu”. We did find it humorous that IE6 was excluded from the choices offered. Here is what the URL entry window looks like if you are using the “Page Menu” to navigate between websites. Here is the main page of the site here displayed in “IE9 Mode”…looking good. Here is the main page viewed in “Forced IE5 Document Mode”. There were some minor differences (colors, sidebar, etc.) in how the main page displayed in comparison to “IE9 Mode”. Being able to switch between modes makes for an interesting experience… As you can see there is not much to the “Context Menu” at the moment. Notice the slightly altered icon for the platform preview… “Add” an Address Bar of Sorts If you would like to use a “make-shift” Address Bar with the platform preview you can set up the portable file (IE9browser.exe) for the Internet Explorer 9 Test Platform Addressbar Mini-Tool. Just place it in an appropriate folder, create a shortcut for it, and it will be ready to go. Here is a close look at the left side of the Address Bar Mini-Tool. You can try to access “IE Favorites” but may have sporadic results like those we experienced during our tests. Note: The Address Bar Mini-Tool will not line up perfectly with the platform preview but still makes a nice addition. And a close look at the right side of the Address Bar Mini-Tool. In order to completely shut down the Address Bar Mini-Tool you will need to click on “Close”. Each time that you enter an address into the Address Bar Mini-Tool it will open a new window/instance of the platform preview. Note: During our tests we noticed that clicking on “Home” in the “Page Menu” opened the previously viewed website but once we closed and restarted the platform preview the test drive website was the starting/home page again. Even if the platform preview is not running the Address Bar Mini-Tool can still run as shown here. Note: You will not be able to move the Address Bar Mini-Tool from its’ locked-in position at the top of the screen. Now for some fun. With just the Address Bar Mini-Tool open you can enter an address and cause the platform preview to open. Here is our example from above now open in the platform preview…good to go. Conclusion During our tests we did experience the occasional crash but overall we were pleased with the platform preview’s performance. The platform preview handled rather well and definitely seemed much quicker than Internet Explorer 8 on our test system (a definite bonus!). If you are an early adopter then this could certainly get you in the mood for the upcoming beta releases! Links Download the Internet Explorer 9 Preview Platform Download the Internet Explorer 9 Test Platform Addressbar Mini-Tool Information about Platform Update for Windows Vista & Server 2008 View the Internet Explorer 9 Platform Preview FAQ Similar Articles Productive Geek Tips Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPMake Ctrl+Tab in Internet Explorer 7 Use Most Recent OrderRemove ISP Text or Corporate Branding from Internet Explorer Title BarWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer?Prevent Firefox or Internet Explorer from Printing the URL on Every Page TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses

    Read the article

  • Boot failure : No DEFAULT or UI configuration directive found!

    - by user12378
    I've tried to install Ubuntu on a VMWare Virtual Machine, but it never get's past the bootloader : ISOLINUX 4.01 debian-20100714 ETCD Copyright (C) 1994-2010 H. Peter Anvin et al No DEFAULT or UI configuration directive found! boot: _ I've also tried to burn this .iso image to a CD and go from there - but I got the same problems also ... Some more details : VMWare Server 2.0.2 Build 203138 on Windows 2008 R2 ubuntu-10.10-desktop-i386.iso image used (downloaded yesterday evening) I have no clue, why this is not booting !!! Somebody have any ideas ? Thanks, Sven

    Read the article

  • Map a Network Drive from XP to Windows 7

    - by Mysticgeek
    We’ve received a lot of questions about mapping a drive from XP to Windows 7 to access data easily. Today we look at how to map a drive in Windows 7, and how to map to an XP drive from Windows 7. With the new Homegroup feature in Windows 7, it makes sharing data between computers a lot easier. But you might need to map a network drive so you can go directly into a folder to access its contents. Mapping a network drive may sound like “IT talk”, but the process is fairly easy. Map Network Drive in Windows 7 Note: All of the computers used in this article are part of the same workgroup on a home network. In this first example we’re mapping to another Windows 7 drive on the network. Open Computer and from the toolbar click on Map Network Drive. Alternately in Computer you can hit “Alt+T” to pull up the toolbar and click on Tools \ Map Network Drive. Now give it an available drive letter, type in the path or browse to the folder you want to map to. Check the box next to Reconnect at logon if you want it available after a reboot, and click Finish. If both machines aren’t part of the same Homegroup, you may be prompted to enter in a username and password. Make sure and check the box next to Remember my credentials if you don’t want to log in every time to access it. The drive will map and the contents of the folder will open up. When you look in Computer, you’ll see the drive under network location. This process works if you want to connect to a server drive as well. In this example we map to a Home Server drive. Map an XP Drive to Windows 7 There might be times when you need to map a drive on an XP machine on your network. There are extra steps you’ll need to take to make it work however. Here we take a look at the problem you’ll encounter when trying to map to an XP machine if things aren’t set up correctly. If you try to browse to your XP machine you’ll see a message that you don’t have permission. Or if you try to enter in the path directly, you’ll be prompted for a username and password, and the annoyance is, no matter what credentials you put in, you can’t connect. To solve the problem we need to set up the Windows 7 machine as a user on the XP machine and make them part of the Administrators group. Right-click My Computer and select Manage. Under Computer Management expand Local Users and Groups and click on the Users folder. Right-click an empty area and click New User. Add in the user credentials, uncheck User must change password at next logon, then check Password never expires then click Create. Now you see the new user you created in the list. After the user is added you might want to reboot before proceeding to the next step.   Next we need to make the user part of the Administrators group. So go back into Computer Management \ Local Users and Groups \ Groups then double click on Administrators. Click the Add button in Administrators Properties window. Enter in the new user you created and click OK. An easy way to do this is to enter the name of the user you created then click Check Names and the path will be entered in for you. Now you see the user as a member of the Administrators group. Back on the Windows 7 machine we’ll start the process of mapping a drive. Here we’re browsing to the XP Media Center Edition machine. Now we can enter in the user name and password we just created. If you only want to access specific shared folders on the XP machine you can browse to them. Or if you want to map to the entire drive, enter in the drive path where in this example it’s “\\XPMCE\C$” –Don’t forget the “$” sign after the local drive letter. Then login… Again the contents of the drive will open up for you to access. Here you can see we have two drives mapped. One to another Windows 7 machine on the network, and the other one to the XP computer.   If you ever want to disconnect a drive, just right-click on it and then Disconnect. There are several scenarios where you might want to map a drive in Windows 7 to access specific data. It takes a little bit of work but you can map to an XP drive from Windows 7 as well. This comes in handy where you have a network with different versions of Windows running on it. Similar Articles Productive Geek Tips Find Your Missing USB Drive on Windows XPMake Vista Index Your Network ConnectionsEasily Backup & Import Your Wireless Network Settings in Windows 7Quickly Open Network Connections List in Windows 7 or VistaHow To Find Drives Easily with Desk Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher

    Read the article

  • Oracle ADF Coverage at OOW

    - by Frank Nimphius
    Below is the schedule for all ADF related sessions at a glance. Note the Meet and greet session added for Wednesday Octiber 3rd from 4.30 pm to 5:30. Oracle ADF and Fusion Development General Session Mon 1 Oct, 2012 Time Title Location 10:45 AM - 11:45 AM General Session: The Future of Development for Oracle Fusion—From Desktop to Mobile to Cloud Marriott Marquis - Salon 8 12:15 PM - 1:15 PM General Session: Extend Oracle Fusion Apps to Tablets/Smartphones with Oracle Mobile Technology Moscone West - 3014 1:45 PM - 2:45 PM General Session: Extend Oracle Applications to Mobile Devices with Oracle’s Mobile Technologies Moscone West - 3002/3004 4:45 PM - 5:45 PM General Session: Building Mobile Applications with Oracle Cloud Moscone West - 2002/2004 Conference Session Mon 1 Oct, 2012 Time Title Location 12:15 PM - 1:15 PM Understanding Oracle ADF and Its Role in Oracle Fusion Moscone South - 306 1:45 PM - 2:45 PM Building Performant Oracle ADF Business Components to Meet Tomorrow’s Needs Marriott Marquis - Golden Gate C3 3:15 PM - 4:15 PM End-to-End Oracle ADF Development in Eclipse Marriott Marquis - Golden Gate C3 4:45 PM - 5:45 PM Classic Mistakes with Oracle Application Development Framework Marriott Marquis - Salon 7 Tues 2 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM One Size Doesn’t Fit All: Oracle ADF Architecture Fundamentals Marriott Marquis - Golden Gate C2 10:15 AM - 11:15 AM Oracle Business Process Management/Oracle ADF Integration Best Practices Marriott Marquis - Golden Gate C3 11:45 AM - 12:45 PM Mobile-Enable Oracle Fusion Middleware and Enterprise Applications with Oracle ADF Moscone South - 306 11:45 AM - 12:45 PM Secrets of Successful Projects with Oracle Application Development Framework Marriott Marquis - Golden Gate C2 1:15 PM - 2:15 PM Develop On-Device iPhone and iPad Apps Without Writing Any Objective-C Code Marriott Marquis - Golden Gate C2 1:15 PM - 2:15 PM BPM, SOA, and Oracle ADF Combined: Patterns Learned from Oracle Fusion Applications Moscone West - 3003 1:15 PM - 2:15 PM The Future of Forms Is … Oracle Forms (and Friends) Moscone South - 306 5:00 PM - 6:00 PM Best Practices for Integrating SOAP and REST Service into Oracle ADF Marriott Marquis - Golden Gate C2 Wed 3 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Mobile Apps for Oracle E-Business Suite with Oracle ADF Mobile and Oracle SOA Suite Moscone West - 3001 10:15 AM - 11:15 AM Visualize This! Best Practices for Data Visualization in Desktop and Mobile Apps Marriott Marquis - Golden Gate C3 10:15 AM - 11:15 AM Set Up Your Oracle ADF Project and Development Team for Productivity: Seven Essential Tips Marriott Marquis - Golden Gate C2 11:45 AM - 12:45 PM How to Migrate an Oracle Forms Application to Oracle ADF Marriott Marquis - Golden Gate C2 1:15 PM - 2:15 PM Oracle ADF: Lessons Learned in Real-World Implementations Moscone South - 309 3:30 PM - 4:30 PM Oracle ADF Implementations Around the Globe: Best Practices Marriott Marquis - Golden Gate C2 3:30 PM - 4:30 PM Oracle Developer Cloud Services Marriott Marquis - Salon 7 4:30 PM - 5:30 PM Oracle JDeveloper and Oracle ADF: What’s New Hilton San Francisco - Continental Ballroom 5 5:00 PM - 6:00 PM Mobile Solutions for Oracle E-Business Suite Applications: Technical Insight Moscone West - 2020 5:00 PM - 6:00 PM Extending Social into Enterprise Applications and Business Processes Marriott Marquis - Golden Gate C3 5:00 PM - 6:00 PM The Tie That Binds: An Introduction to Oracle ADF Bindings Marriott Marquis - Golden Gate C2 Thur 4 Oct, 2012 Time Title Location 11:15 AM - 12:15 PM Using Oracle ADF with Oracle E-Business Suite: The Full Integration View Moscone West - 3003 11:15 AM - 12:15 PM Deep Dive into Oracle ADF: Advanced Techniques Marriott Marquis - Golden Gate C2 12:45 PM - 1:45 PM Monitor, Analyze, and Troubleshoot Your Oracle ADF Application Marriott Marquis - Golden Gate C2 2:15 PM - 3:15 PM Oracle WebCenter Portal: Creating and Using Content Presenter Templates Marriott Marquis - Golden Gate C2 HOL (Hands-on Lab) Mon 1 Oct, 2012 Time Title Location 10:45 AM - 11:45 AM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 1:45 PM - 2:45 PM Build Mobile Applications for Oracle E-Business Suite Marriott Marquis - Salon 10A 3:15 PM - 4:15 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 3:15 PM - 4:15 PM Introduction to Oracle ADF: Hands-on Lab Marriott Marquis - Salon 3/4 4:45 PM - 5:45 PM Application Lifecycle Management with Oracle JDeveloper: Hands-on Lab Marriott Marquis - Salon 3/4 Tues 2 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 5:00 PM - 6:00 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A Wed 3 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Introduction to Oracle ADF: Hands-on Lab Marriott Marquis - Salon 3/4 11:45 AM - 12:45 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 1:15 PM - 2:15 PM Build Mobile Applications for Oracle E-Business Suite Marriott Marquis - Salon 10A 3:30 PM - 4:30 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 5:00 PM - 6:00 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A Thur 4 Oct, 2012 Time Title Location 11:15 AM - 12:15 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 11:15 AM - 12:15 PM Introduction to Oracle ADF: Hands-on Lab Marriott Marquis - Salon 3/4 12:45 PM - 1:45 PM Oracle ADF for Java EE Developers with Oracle Enterprise Pack for Eclipse Marriott Marquis - Salon 3/4 BOF (Birds-of-a-Feather) Mon 1 Oct, 2012 Time Title Location 6:15 PM - 7:00 PM How to Get Started with Oracle ADF Marriott Marquis - Club Room 7:15 PM - 8:00 PM Building Next-Generation Applications with Oracle ADF and Oracle BPM Marriott Marquis - Golden Gate C3 7:15 PM - 8:00 PM The Future of Oracle Forms: Upgrade, Modernize, or Migrate? Marriott Marquis - Golden Gate C2 7:15 PM - 8:00 PM Oracle ADF Faces: One Site for Many Devices Marriott Marquis - Golden Gate C1 - User Group Forum (Sunday Only) Sun 30 Sept, 2012 Time Title Location 9:00 AM - 10:00 AM Oracle ADF Immersion: How an Oracle Forms Developer Immersed Himself in the Oracle ADF World Moscone South - 305 10:15 AM - 11:15 AM Deploy with Joy: Using Hudson to Build and Deploy Your Oracle ADF Applications Moscone South - 305 11:30 AM - 12:30 PM ADF EMG User Group: A Peek into the Oracle ADF Architecture of Oracle Fusion Applications Moscone South - 305 12:45 PM - 3:45 PM ADF EMG User Group: Oracle Fusion Middleware Live Application Development Demo Moscone South - 305 3:15 PM - 4:15 PM Mobile Development with Oracle JDeveloper and Oracle ADF Moscone West - 2010 Demos Demo Location Developer Moscone North, Upper Lobby - N-002 Oracle ADF Mobile Development Moscone North, Upper Lobby - N-001 Oracle Eclipse Projects Hilton San Francisco, Grand Ballroom - HHJ-008 Oracle Enterprise Pack for Eclipse Moscone South, Right - S-208 Oracle JDeveloper and Oracle ADF Moscone South, Right - S-207 Exhibits 0 Exhibitor Location Accenture Moscone South - 1813 Moscone South - 2221 Infosys Moscone South - 1701 Moscone South - SMR-005 Innowave Technology Moscone South - 2309 ODTUG Moscone West, Level 2 Lobby - Kiosk in the User Groups Pavilion Oracle ADF Developers Meet Up Wednesday, Oct 03 Time Activity Location 4:30 PM - 5:30 PM Stop by the OTN Lounge and meet other Oracle ADF & Fusion developers as well as product managers and engineers who work on Oracle ADF, ADF Mobile and ADF Essentials. Feedback and questions welcome, or simply stop by and say ‘hi!’ and enjoy free beer. OTN Lounge

    Read the article

  • Geek Fun: Virtualized Old School Windows – Windows 95

    - by Matthew Guay
    Last week we enjoyed looking at Windows 3.1 running in VMware Player on Windows 7.  Today, let’s upgrade our 3.1 to 95, and get a look at how most of us remember Windows from the 90’s. In this demo, we’re running the first release of Windows 95 (version 4.00.950) in VMware Player 3.0 running on Windows 7 x64.  For fun, we ran the 95 upgrade on the 3.1 virtual machine we built last week. Windows 95 So let’s get started.  Here’s the first setup screen.  For the record, Windows 95 installed in about 15 minutes or less in VMware in our test. Strangely, Windows 95 offered several installation choices.  They actually let you choose what extra parts of Windows to install if you wished.  Oh, and who wants to run Windows 95 on your “Portable Computer”?  Most smartphones today are more powerful than the “portable computers” of 95. Your productivity may vastly increase if you run Windows 95.  Anyone want to switch? No, I don’t want to restart … I want to use my computer! Welcome to Windows 95!  Hey, did you know you can launch programs from the Start button? Our quick spin around Windows 95 reminded us why Windows got such a bad reputation in the ‘90’s for being unstable.  We didn’t even get our test copy fully booted after installation before we saw our first error screen.  Windows in space … was that the most popular screensaver in Windows 95, or was it just me? Hello Windows 3.1!  The UI was still outdated in some spots.   Ah, yes, Media Player before it got 101 features to compete with iTunes. But, you couldn’t even play CDs in Media Player.  Actually, CD player was one program I used almost daily in Windows 95 back in the day. Want some new programs?  This help file about new programs designed for Windows 95 lists a lot of outdated names in tech.    And, you really may want some programs.  The first edition of Windows 95 didn’t even ship with Internet Explorer.   We’ve still got Minesweeper, though! My Computer had really limited functionality, and by default opened everything in a new window.  Double click on C:, and it opens in a new window.  Ugh. But Explorer is a bit more like more modern versions. Hey, look, Start menu search!  If only it found the files you were looking for… Now I’m feeling old … this shutdown screen brought back so many memories … of shutdowns that wouldn’t shut down! But, you still have to turn off your computer.  I wonder how many old monitors had these words burned into them? So there’s yet another trip down Windows memory lane.  Most of us can remember using Windows 95, so let us know your favorite (or worst) memory of it!  At least we can all be thankful for our modern computers and operating systems today, right?  Similar Articles Productive Geek Tips Geek Fun: Remember the Old-School SkiFree Game?Geek Fun: Virtualized old school Windows 3.11Stupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7Stupid Geek Tricks: Select Multiple Windows on the TaskbarHow to Delete a System File in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Geek Fun: Virtualized Old School Windows – Windows 95

    - by Matthew Guay
    Last week we enjoyed looking at Windows 3.1 running in VMware Player on Windows 7.  Today, let’s upgrade our 3.1 to 95, and get a look at how most of us remember Windows from the 90’s. In this demo, we’re running the first release of Windows 95 (version 4.00.950) in VMware Player 3.0 running on Windows 7 x64.  For fun, we ran the 95 upgrade on the 3.1 virtual machine we built last week. Windows 95 So let’s get started.  Here’s the first setup screen.  For the record, Windows 95 installed in about 15 minutes or less in VMware in our test. Strangely, Windows 95 offered several installation choices.  They actually let you choose what extra parts of Windows to install if you wished.  Oh, and who wants to run Windows 95 on your “Portable Computer”?  Most smartphones today are more powerful than the “portable computers” of 95. Your productivity may vastly increase if you run Windows 95.  Anyone want to switch? No, I don’t want to restart … I want to use my computer! Welcome to Windows 95!  Hey, did you know you can launch programs from the Start button? Our quick spin around Windows 95 reminded us why Windows got such a bad reputation in the ‘90’s for being unstable.  We didn’t even get our test copy fully booted after installation before we saw our first error screen.  Windows in space … was that the most popular screensaver in Windows 95, or was it just me? Hello Windows 3.1!  The UI was still outdated in some spots.   Ah, yes, Media Player before it got 101 features to compete with iTunes. But, you couldn’t even play CDs in Media Player.  Actually, CD player was one program I used almost daily in Windows 95 back in the day. Want some new programs?  This help file about new programs designed for Windows 95 lists a lot of outdated names in tech.    And, you really may want some programs.  The first edition of Windows 95 didn’t even ship with Internet Explorer.   We’ve still got Minesweeper, though! My Computer had really limited functionality, and by default opened everything in a new window.  Double click on C:, and it opens in a new window.  Ugh. But Explorer is a bit more like more modern versions. Hey, look, Start menu search!  If only it found the files you were looking for… Now I’m feeling old … this shutdown screen brought back so many memories … of shutdowns that wouldn’t shut down! But, you still have to turn off your computer.  I wonder how many old monitors had these words burned into them? So there’s yet another trip down Windows memory lane.  Most of us can remember using Windows 95, so let us know your favorite (or worst) memory of it!  At least we can all be thankful for our modern computers and operating systems today, right?  Similar Articles Productive Geek Tips Geek Fun: Remember the Old-School SkiFree Game?Geek Fun: Virtualized old school Windows 3.11Stupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7Stupid Geek Tricks: Select Multiple Windows on the TaskbarHow to Delete a System File in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Unity Locks Up in Live CD

    - by user212883
    I'm trying to run from the live USB to install Ubuntu 13.10 on my Windows Machine (as I've grown a touch sick of Windows). However, whenever I boot into the LiveUSB session after a few moments the Unity desktop locks up (except the mouse pointer, which I can move). Is this something to do with the fact I've got an NVidia 580 GTX? I've heard of issues with Ubuntu and this card. I've also got an SSD, but given that it's booting from USB I shouldn't think that's an issue. System Specs: Processor: Intel Core i7-2600K CPU @ 3.40 GHZ Motherboard: Asus Maximus IV Gene-Z Z68 Socket 1155 RAM: 8GB DDR3 GPU: ASUS NVidia 580 GTX

    Read the article

  • Integrate Nitro PDF Reader with Windows 7

    - by Matthew Guay
    Would you like a lightweight PDF reader that integrates nicely with Office and Windows 7?  Here we look at the new Nitro PDF Reader, a nice PDF viewer that also lets you create and markup PDF files. Adobe Reader is the de-facto PDF viewer, but it only lets you view PDFs and not much else.  Additionally, it doesn’t fully integrate with 64-bit editions of Vista and Windows 7.  There are many alternate PDF readers, but Nitro PDF Reader is a new entry into this field that offers more features than most PDF readers.  From the creators of the popular free PrimoPDF printer, the new Reader lets you create PDFs from a variety of file formats and markup existing PDFs with notes, highlights, stamps, and more in addition to viewing PDFs.  It also integrates great with Windows 7 using the Office 2010 ribbon interface. Getting Started Download the free Nitro PDF Reader (link below) and install as normal.  Nitro PDF Reader has separate versions for 32 & 64-bit editions of Windows, so download the correct one for your computer. Note:  Nitro PDF Reader is still in Beta testing, so only install if you’re comfortable with using beta software. On first run, Nitro PDF Reader will ask if you want to make it the default PDF viewer.  If you don’t want to, make sure to uncheck the box beside Always perform this check to keep it from opening this prompt every time you use it. It will also open an introductory PDF the first time you run it so you can quickly get acquainted with its features. Windows 7 Integration One of the first things you’ll notice is that Nitro PDF Reader integrates great with Windows 7.  The ribbon interface fits right in with native applications such as WordPad and Paint, as well as Office 2010. If you set Nitro PDF Reader as your default PDF viewer, you’ll see thumbnails of your PDFs in Windows Explorer. If you turn on the Preview Pane, you can read full PDFs in Windows Explorer.  Adobe Reader lets you do this in 32 bit versions, but Nitro PDF works in 64 bit versions too. The PDF preview even works in Outlook.  If you receive an email with a PDF attachment, you can select the PDF and view it directly in the Reading Pane.  Click the Preview file button, and you can uncheck the box at the bottom so PDFs will automatically open for preview if you want.   Now you can read your PDF attachments in Outlook without opening them separately.  This works in both Outlook 2007 and 2010. Edit your PDFs Adobe Reader only lets you view PDF files, and you can’t save data you enter in PDF forms.  Nitro PDF Reader, however, gives you several handy markup tools you can use to edit your PDFs.  When you’re done, you can save the final PDF, including information entered into forms. With the ribbon interface, it’s easy to find the tools you want to edit your PDFs. Here we’ve highlighted text in a PDF and added a note to it.  We can now save these changes, and they’ll look the same in any PDF reader, including Adobe Reader. You can also enter new text in PDFs.  This will open a new tab in the ribbon, where you can select basic font settings.  Select the Click To Finish button in the ribbon when you’re finished editing text.   Or, if you want to use the text or pictures from a PDF in another application, you can choose to extract them directly in Nitro PDF Reader.  Create PDFs One of the best features of Nitro PDF Reader is the ability to create PDFs from almost any file.  Nitro adds a new virtual printer to your computer that creates PDF files from anything you can print.  Print your file as normal, but select the Nitro PDF Creator (Reader) printer. Enter a name for your PDF, select if you want to edit the PDF properties, and click Create. If you choose to edit the PDF properties, you can add your name and information to the file, select the initial view, encrypt it, and restrict permissions. Alternately, you can create a PDF from almost any file by simply drag-and-dropping it into Nitro PDF Reader.  It will automatically convert the file to PDF and open it in a new tab in Nitro PDF. Now from the File menu you can send the PDF as an email attachment so anyone can view it. Make sure to save the PDF before closing Nitro, as it does not automatically save the PDF file.   Conclusion Nitro PDF Reader is a nice alternative to Adobe Reader, and offers some features that are only available in the more expensive Adobe Acrobat.  With great Windows 7 integration, including full support for 64-bit editions, Nitro fits in with the Windows and Office experience very nicely.  If you have tried out Nitro PDF Reader leave a comment and let us know what you think. Link Download Nitro PDF Reader Similar Articles Productive Geek Tips Install Adobe PDF Reader on Ubuntu EdgySubscribe to RSS Feeds in Chrome with a Single ClickChange Default Feed Reader in FirefoxFix for Windows Explorer Folder Pane in XP Becomes Grayed OutRemove "Please wait while the document is being prepared for reading" Message in Adobe Reader 8 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 tinysong gives a shortened URL for you to post on Twitter (or anywhere) 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes

    Read the article

  • Remove Office 2010 Beta and Reinstall Office 2007

    - by Matthew Guay
    Have you tried out the Office 2010 beta, but want to go back to Office 2007?  Here’s a step-by-step tutorial on how to remove your Office 2010 beta and reinstall your Office 2007. The Office 2010 beta will expire on October 31, 2010, at which time you may see a dialog like the one below.  At that time, you will need to either upgrade to the final release of Office 2010, or reinstall your previous version of Office. Our computer was running the Office 2010 Home and Business Click to Run beta, and after uninstalling it we reinstalled Office 2007 Home and Student.  This was a Windows Vista computer, but the process will be exactly the same on Windows XP, Vista, or Windows 7.  Additionally, the process to reinstall Office 2007 will be exactly the same regardless of the edition of Office 2007 you’re using. However, please note that if you are running a different edition of Office 2010, especially the 64 bit version, the process may be slightly different.  We will cover this scenario in another article. Remove Office 2010 Click to Run Beta: To remove Office 2010 Click to Run Beta, open Control Panel and select Uninstall a Program. If your computer is running Windows 7, enter “Uninstall a program” in your Start menu search. Scroll down, select “Microsoft Office Click-to-Run 2010 (Beta)”, and click the Uninstall button on the toolbar.  Note that there will be two entries for Office, so make sure to select the “Click-to-Run” entry. This will automatically remove all of Office 2010 and its components.  Click Yes to confirm you want to remove it. Office 2010 beta uninstalled fairly quickly, and a reboot will be required.  Once your computer is rebooted, Office 2010 will be entirely removed. Reinstall Office 2007 Now, you’re to the easy part.  Simply insert your Office 2007 CD, and it should automatically startup the setup.  If not, open Computer and double-click on your CD drive.   Now, double-click on setup.exe to start the installation. Enter your product key, and click Continue…   Click Install Now, or click Customize if you want to change the default installation settings. Wait while Office 2007 installs…it takes around 15 to 20 minutes in our experience.  Once it’s finished  close the installer. Now, open one of the Office applications.  A popup will open asking you to activate Office.  Make sure you’re connected to the internet, and click next; otherwise, you can select to activate over the phone if you do not have internet access. This should only take a minute, and Office 2007 will be activated and ready to run. Everything should work just as it did before you installed Office 2010.  Enjoy! Office Updates Make sure to install the latest updates for Office 2007, as these are not included in your disk.  Check Windows Update (search for Windows Update in the Start menu search), and install all of the available updates for Office 2007, including Service Pack 2. Conclusion This is a great way to keep using Office even if you don’t decide to purchase Office 2010 after it is released.  Additionally, if you’re were using another version of Office, such as Office 2003, then reinstall it as normal after following the steps to remove Office 2010. Similar Articles Productive Geek Tips Add or Remove Apps from the Microsoft Office 2007 or 2010 SuiteDetect and Repair Applications In Microsoft Office 2007Save and Restore Your Microsoft Office SettingsDisable Office 2010 Beta Send-a-Smile from StartupHow to See the About Dialog and Version Information in Office 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 If Web Browsers Were Modes of Transportation Google Translate (for animals) Out of 100 Tweeters Roadkill’s Scan Port scans for open ports Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows

    Read the article

  • Using Unity – Part 3

    - by nmarun
    The previous blog was about registering and invoking different types dynamically. In this one I’d like to show how Unity manages/disposes the instances – say hello to Lifetime Managers. When a type gets registered, either through the config file or when RegisterType method is explicitly called, the default behavior is that the container uses a transient lifetime manager. In other words, the unity container creates a new instance of the type when Resolve or ResolveAll method is called. Whereas, when you register an existing object using the RegisterInstance method, the container uses a container controlled lifetime manager - a singleton pattern. It does this by storing the reference of the object and that means so as long as the container is ‘alive’, your registered instance does not go out of scope and will be disposed only after the container either goes out of scope or when the code explicitly disposes the container. Let’s see how we can use these and test if something is a singleton or a transient instance. Continuing on the same solution used in the previous blogs, I have made the following changes: First is to add typeAlias elements for TransientLifetimeManager type: 1: <typeAlias alias="transient" type="Microsoft.Practices.Unity.TransientLifetimeManager, Microsoft.Practices.Unity"/> You then need to tell what type(s) you want to be transient by nature: 1: <type type="IProduct" mapTo="Product2"> 2: <lifetime type="transient" /> 3: </type> 4: <!--<type type="IProduct" mapTo="Product2" />--> The lifetime element’s type attribute matches with the alias attribute of the typeAlias element. Now since ‘transient’ is the default behavior, you can have a concise version of the same as line 4 shows. Also note that I’ve changed the mapTo attribute from ‘Product’ to ‘Product2’. I’ve done this to help understand the transient nature of the instance of the type Product2. By making this change, you are basically saying when a type of IProduct needs to be resolved, Unity should create an instance of Product2 by default. 1: public string WriteProductDetails() 2: { 3: return string.Format("Name: {0}<br/>Category: {1}<br/>Mfg Date: {2}<br/>Hash Code: {3}", 4: Name, Category, MfgDate.ToString("MM/dd/yyyy hh:mm:ss tt"), GetHashCode()); 5: } Again, the above change is purely for the purpose of making the example more clear to understand. The display will show the full date and also displays the hash code of the current instance. The GetHashCode() method returns an integer when an instance gets created – a new integer for every instance. When you run the application, you’ll see something like the below: Now when you click on the ‘Get Product2 Instance’ button, you’ll see that the Mfg Date (which is set in the constructor) and the Hash Code are different from the one created on page load. This proves to us that a new instance is created every single time. To make this a singleton, we need to add a type alias for the ContainerControlledLifetimeManager class and then change the type attribute of the lifetime element to singleton. 1: <typeAlias alias="singleton" type="Microsoft.Practices.Unity.ContainerControlledLifetimeManager, Microsoft.Practices.Unity"/> 2: ... 3: <type type="IProduct" mapTo="Product2"> 4: <lifetime type="singleton" /> 5: </type> Running the application now gets me the following output: Click on the button below and you’ll see that the Mfg Date and the Hash code remain unchanged => the unity container is storing the reference the first time it is created and then returns the same instance every time the type needs to be resolved. Digging more deeper into this, Unity provides more than the two lifetime managers. ExternallyControlledLifetimeManager – maintains a weak reference to type mappings and instances. Unity returns the same instance as long as the some code is holding a strong reference to this instance. For this, you need: 1: <typeAlias alias="external" type="Microsoft.Practices.Unity.ExternallyControlledLifetimeManager, Microsoft.Practices.Unity"/> 2: ... 3: <type type="IProduct" mapTo="Product2"> 4: <lifetime type="external" /> 5: </type> PerThreadLifetimeManager – Unity returns a unique instance of an object for each thread – so this effectively is a singleton behavior on a  per-thread basis. 1: <typeAlias alias="perThread" type="Microsoft.Practices.Unity.PerThreadLifetimeManager, Microsoft.Practices.Unity"/> 2: ... 3: <type type="IProduct" mapTo="Product2"> 4: <lifetime type="perThread" /> 5: </type> One thing to note about this is that if you use RegisterInstance method to register an existing object, this instance will be returned for every thread, making this a purely singleton behavior. Needless to say, this type of lifetime management is useful in multi-threaded applications (duh!!). I hope this blog provided some basics on lifetime management of objects resolved in Unity and in the next blog, I’ll talk about Injection. Please see the code used here.

    Read the article

  • How to Animate Text and Objects in PowerPoint 2010

    - by DigitalGeekery
    Are you looking for an eye catching way to keep your audience interested in your PowerPoint presentations? Today we’ll take a look at how to add animation effects to objects in PowerPoint 2010. Select the object you wish to animate and then click the More button in the Animation group of the Animation tab.   Animations are grouped into four categories. Entrance effects, Exit effects, Emphasis effects, and Motion Paths. You can get a Live Preview of how the animation will look by hovering your mouse over an animation effect.   When you select a Motion Path, your object will move along the dashed path line as shown on the screen. (This path is not displayed in the final output) Certain aspects of the Motion Path effects are editable. When you apply a Motion Path animation to an object, you can select the path and drag the end to change the length or size of the path. The green marker along the motion path marks the beginning of the  path and the red marks the end. The effects can be rotated by clicking and the bar near the center of the effect.   You can display additional effects by choosing one of the options at the bottom. This will pop up a Change Effect window. If you have Preview Effect checked at the lower left you can preview the effects by single clicking.   Apply Multiple Animations to an Object Select the object and then click the Add Animation button to display the animation effects. Just as we did with the first effect, you can hover over to get a live preview. Click to apply the effect. The animation effects will happen in the order they are applied. Animation Pane You can view a list of the animations applied to a slide by opening the Animation Pane. Select the Animation Pane button from the Advanced Animation group to display the Animation Pane on the right. You’ll see that each animation effect in the animation pane has an assigned number to the left.    Timing Animation Effects You can change when your animation starts to play. By default it is On Click. To change it, select the effect in the Animation Pane and then choose one of the options from the Start dropdown list. With Previous starts at the same time as the previous animation and After Previous starts after the last animation. You can also edit the duration that the animations plays and also set a delay.   You can change the order in which the animation effects are applied by selecting the effect in the animation pane and clicking Move Earlier or Move Later from the Timing group on the Animation tab. Effect Options If the Effect Options button is available when your animation is selected, then that particular animation has some additional effect settings that can be configured. You can access the Effect Option by right-clicking on the the animation in the Animation Pane, or by selecting Effect Options on the ribbon.   The available options will vary by effect and not all animation effects will have Effect Options settings. In the example below, you can change the amount of spinning and whether the object will spin clockwise or counterclockwise.   Under Enhancements, you can add sound effects to your animation. When you’re finished click OK.   Animating Text Animating Text works the same as animating an object. Simply select your text box and choose an animation. Text does have some different Effect Options. By selecting a sequence, you decide whether the text appears as one object, all at once, or by paragraph. As is the case with objects, there will be different available Effect Options depending on the animation you choose. Some animations, such as the Fly In animation, will have directional options.   Testing Your Animations Click on the Preview button at any time to test how your animations look. You can also select the Play button on the Animation Pane. Conclusion Animation effects are a great way to focus audience attention on important points and hold viewers interest in your PowerPoint presentations. Another cool way to spice up your PPT 2010 presentations is to add video from the web. What tips do you guys have for making your PowerPoint presentations more interesting? Similar Articles Productive Geek Tips Center Pictures and Other Objects in Office 2007 & 2010Preview Before You Paste with Live Preview in Office 2010Embed True Type Fonts in Word and PowerPoint 2007 DocumentsHow to Add Video from the Web in PowerPoint 2010Add Artistic Effects to Your Pictures in Office 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials

    Read the article

  • Oracle Coherence, Split-Brain and Recovery Protocols In Detail

    - by Ricardo Ferreira
    This article provides a high level conceptual overview of Split-Brain scenarios in distributed systems. It will focus on a specific example of cluster communication failure and recovery in Oracle Coherence. This includes a discussion on the witness protocol (used to remove failed cluster members) and the panic protocol (used to resolve Split-Brain scenarios). Note that the removal of cluster members does not necessarily indicate a Split-Brain condition. Oracle Coherence does not (and cannot) detect a Split-Brain as it occurs, the condition is only detected when cluster members that previously lost contact with each other regain contact. Cluster Topology and Configuration In order to create an good didactic for the article, let's assume a cluster topology and configuration. In this example we have a six member cluster, consisting of one JVM on each physical machine. The member IDs are as follows: Member ID  IP Address  1  10.149.155.76  2  10.149.155.77  3  10.149.155.236  4  10.149.155.75  5  10.149.155.79  6  10.149.155.78 Members 1, 2, and 3 are connected to a switch, and members 4, 5, and 6 are connected to a second switch. There is a link between the two switches, which provides network connectivity between all of the machines. Member 1 is the first member to join this cluster, thus making it the senior member. Member 6 is the last member to join this cluster. Here is a log snippet from Member 6 showing the complete member set: 2010-02-26 15:27:57.390/3.062 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=main, member=6): Started DefaultCacheServer... SafeCluster: Name=cluster:0xDDEB Group{Address=224.3.5.3, Port=35465, TTL=4} MasterMemberSet ( ThisMember=Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) OldestMember=Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) ActualMemberSet=MemberSet(Size=6, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=5, Timestamp=2010-02-26 15:27:49.095, Address=10.149.155.79:8088, MachineId=1103, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:3229, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) RecycleMillis=120000 RecycleSet=MemberSet(Size=0, BitSetCount=0 ) ) At approximately 15:30, the connection between the two switches is severed: Thirty seconds later (the default packet timeout in development mode) the logs indicate communication failures across the cluster. In this example, the communication failure was caused by a network failure. In a production setting, this type of communication failure can have many root causes, including (but not limited to) network failures, excessive GC, high CPU utilization, swapping/virtual memory, and exceeding maximum network bandwidth. In addition, this type of failure is not necessarily indicative of a split brain. Any communication failure will be logged in this fashion. Member 2 logs a communication failure with Member 5: 2010-02-26 15:30:32.638/196.928 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=2): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=5, Timestamp=2010-02-26 15:27:49.095, Address=10.149.155.79:8088, MachineId=1103, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:3229, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) ) The Coherence clustering protocol (TCMP) is a reliable transport mechanism built on UDP. In order for the protocol to be reliable, it requires an acknowledgement (ACK) for each packet delivered. If a packet fails to be acknowledged within the configured timeout period, the Coherence cluster member will log a packet timeout (as seen in the log message above). When this occurs, the cluster member will consult with other members to determine who is at fault for the communication failure. If the witness members agree that the suspect member is at fault, the suspect is removed from the cluster. If the witnesses unanimously disagree, the accuser is removed. This process is known as the witness protocol. Since Member 2 cannot communicate with Member 5, it selects two witnesses (Members 1 and 4) to determine if the communication issue is with Member 5 or with itself (Member 2). However, Member 4 is on the switch that is no longer accessible by Members 1, 2 and 3; thus a packet timeout for member 4 is recorded as well: 2010-02-26 15:30:35.648/199.938 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=2): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) Member 1 has the ability to confirm the departure of member 4, however Member 6 cannot as it is also inaccessible. At the same time, Member 3 sends a request to remove Member 6, which is followed by a report from Member 3 indicating that Member 6 has departed the cluster: 2010-02-26 15:30:35.706/199.996 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=2): MemberLeft request for Member 6 received from Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) 2010-02-26 15:30:35.709/199.999 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=2): MemberLeft notification for Member 6 received from Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) The log for Member 3 determines how Member 6 departed the cluster: 2010-02-26 15:30:35.161/191.694 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=3): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) ) 2010-02-26 15:30:35.165/191.698 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=3): Member departure confirmed by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) ); removing Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) In this case, Member 3 happened to select two witnesses that it still had connectivity with (Members 1 and 2) thus resulting in a simple decision to remove Member 6. Given the departure of Member 6, Member 2 is left with a single witness to confirm the departure of Member 4: 2010-02-26 15:30:35.713/200.003 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=2): Member departure confirmed by MemberSet(Size=1, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) ); removing Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) In the meantime, Member 4 logs a missing heartbeat from the senior member. This message is also logged on Members 5 and 6. 2010-02-26 15:30:07.906/150.453 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=PacketListenerN, member=4): Scheduled senior member heartbeat is overdue; rejoining multicast group. Next, Member 4 logs a TcpRing failure with Member 2, thus resulting in the termination of Member 2: 2010-02-26 15:30:21.421/163.968 Oracle Coherence GE 3.5.3/465p2 <D4> (thread=Cluster, member=4): TcpRing: Number of socket exceptions exceeded maximum; last was "java.net.SocketTimeoutException: connect timed out"; removing the member: 2 For quick process termination detection, Oracle Coherence utilizes a feature called TcpRing which is a sparse collection of TCP/IP-based connections between different members in the cluster. Each member in the cluster is connected to at least one other member, which (if at all possible) is running on a different physical box. This connection is not used for any data transfer, only heartbeat communications are sent once a second per each link. If a certain number of exceptions are thrown while trying to re-establish a connection, the member throwing the exceptions is removed from the cluster. Member 5 logs a packet timeout with Member 3 and cites witnesses Members 4 and 6: 2010-02-26 15:30:29.791/165.037 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=5): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) 2010-02-26 15:30:29.798/165.044 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=5): Member departure confirmed by MemberSet(Size=2, BitSetCount=2 Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ); removing Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) Eventually we are left with two distinct clusters consisting of Members 1, 2, 3 and Members 4, 5, 6, respectively. In the latter cluster, Member 4 is promoted to senior member. The connection between the two switches is restored at 15:33. Upon the restoration of the connection, the cluster members immediately receive cluster heartbeats from the two senior members. In the case of Members 1, 2, and 3, the following is logged: 2010-02-26 15:33:14.970/369.066 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=1): The member formerly known as Member(Id=4, Timestamp=2010-02-26 15:30:35.341, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) has been forcefully evicted from the cluster, but continues to emit a cluster heartbeat; henceforth, the member will be shunned and its messages will be ignored. Likewise for Members 4, 5, and 6: 2010-02-26 15:33:14.343/336.890 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=4): The member formerly known as Member(Id=1, Timestamp=2010-02-26 15:30:31.64, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) has been forcefully evicted from the cluster, but continues to emit a cluster heartbeat; henceforth, the member will be shunned and its messages will be ignored. This message indicates that a senior heartbeat is being received from members that were previously removed from the cluster, in other words, something that should not be possible. For this reason, the recipients of these messages will initially ignore them. After several iterations of these messages, the existence of multiple clusters is acknowledged, thus triggering the panic protocol to reconcile this situation. When the presence of more than one cluster (i.e. Split-Brain) is detected by a Coherence member, the panic protocol is invoked in order to resolve the conflicting clusters and consolidate into a single cluster. The protocol consists of the removal of smaller clusters until there is one cluster remaining. In the case of equal size clusters, the one with the older Senior Member will survive. Member 1, being the oldest member, initiates the protocol: 2010-02-26 15:33:45.970/400.066 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=1): An existence of a cluster island with senior Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) containing 3 nodes have been detected. Since this Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) is the senior of an older cluster island, the panic protocol is being activated to stop the other island's senior and all junior nodes that belong to it. Member 3 receives the panic: 2010-02-26 15:33:45.803/382.336 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=3): Received panic from senior Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) caused by Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member 4, the senior member of the younger cluster, receives the kill message from Member 3: 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. In turn, Member 4 requests the departure of its junior members 5 and 6: 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. 2010-02-26 15:33:43.343/349.015 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=6): Received a Kill message from a valid Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer); stopping cluster service. Once Members 4, 5, and 6 restart, they rejoin the original cluster with senior member 1. The log below is from Member 4. Note that it receives a different member id when it rejoins the cluster. 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. 2010-02-26 15:33:46.921/369.468 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Service Cluster left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Invocation:InvocationService, member=4): Service InvocationService left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=OptimisticCache, member=4): Service OptimisticCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=ReplicatedCache, member=4): Service ReplicatedCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=DistributedCache, member=4): Service DistributedCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Invocation:Management, member=4): Service Management left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service Management with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service DistributedCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service ReplicatedCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service OptimisticCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service InvocationService with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member(Id=6, Timestamp=2010-02-26 15:33:47.046, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) left Cluster with senior member 4 2010-02-26 15:33:49.218/371.765 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=main, member=n/a): Restarting cluster 2010-02-26 15:33:49.421/371.968 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a 2010-02-26 15:33:49.625/372.172 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=n/a): This Member(Id=5, Timestamp=2010-02-26 15:33:50.499, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1) joined cluster "cluster:0xDDEB" with senior Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=2) Cool isn't it?

    Read the article

  • The Best Free Tools for Creating a Bootable Windows or Linux USB Drive

    - by Lori Kaufman
    If you need to install Windows or Linux and you don’t have access to a CD/DVD drive, a bootable USB drive is the solution. You can boot to the USB drive, using it to run the OS setup program, just like a CD or DVD. We have collected some links to free programs that allow you to easily setup a USB drive to install Windows or Linux on a computer. NOTE: If you have problems getting the BIOS on your computer to let you boot from a USB drive, see our article about booting from a USB drive even if your BIOS won’t let you. What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

    Read the article

  • SQLAuthority News – Author Visit Review – TechMela Nepal – March 29-30, 2010

    - by pinaldave
    I was very fortunate to attend TechMela at Kathmandu, Nepal on 29th and 30th of March 2010. I would like to thank Allen Bailochan Tuladhar from Microsoft MDP Nepal for inviting me. Allen is a person with seemingly infinite energy and unlimited passion for Microsoft Technology. If you get an opportunity to spend just one hour with him, you will surely be more enthusiastic with regards to Microsoft Technology. And, I was lucky enough that I was able to spend about a total of 9 days with him in Kathmandu, working along with him in the Tech Community. TechMela Nepal Pinal at TechMela, Nepal TechMela is considered as one of the biggest events in Nepal, having been organized by Microsoft MDP Nepal. This event was attended by around 500 students and hundreds of Tech professionals. The event was handled very professionally and at very large scale. Every minor detail was properly planned and obviously thought out well. There were around 50+ volunteers from MS MDP who were monitoring this event systematically to make sure the event would run as smooth as planned. Attendees in Geek T-Shirts During this event, I was delighted to meet David Lim of Microsoft Singapore. He is very passionate in working for Microsoft Technology, as well as building deep relations with the Community. I was fortunate to spend my entire afternoon with him during the sight-seeing trip. We discussed various MS technologies and their community’s adoption as well as the way how each of us can be a part of the community activity. He also delivered excellent keynotes at the event. I must say that this is one of the most enjoyable keynotes I have ever attended. It was interesting and interactive, and I must say that I had the 70s feelings with all the fonts and graphics. I still remember him saying, “Yeah, I was a student and I know you.” Allen Tuladhar, David Lim, Pinal Dave and Guests After the keynote, everybody cheered when Allen came on stage to talk about the event and to introduce the agenda for the next two days. I must say that Allen is one of the most well-known people in Nepal. I was impressed with his popularity, and to prove this, when he got on the stage he had to wait for a long full minute before he was able to greet “Welcome” while the attendees were clapping and cheering. Technology Panelist at Techmela Kathmandu, Nepal This event was blessed with the top-of-the-top officials of various IT industries, Nepal ministries and the US Embassy. All the prominent personalities were present for panel discussion on the stage. The talk was done on various subjects. Also, the energy level which was set by Allen really echoed in the audience as they asked certain questions on different global as well local IT-related questions. The panel discussion really was discussion instead of usual monologue of one person. Pinal Dave presending at TechMela Kathmandu, Nepal This was a two-day event and my session was on either of the day. I had a great participation from the audience on both days. The place where the event was organized had a capacity of around 500+ audience. Both of my sessions were heavily attended and volunteers did a fabulous job helping the attendees find empty seats or arrange some additional seats. I was overwhelmed with the interaction I have received in the large hall. Attendees were not so shy to express their thoughts, so both the sessions were followed up by top notch one-on-one conversations for a couple of hours. Pinal Dave presending at TechMela Kathmandu, Nepal Pinal Dave presending at TechMela Kathmandu, Nepal Pinal Dave presending at TechMela Kathmandu, Nepal There are many questions that I have received during the event, and many of them can be interesting for all of us here so I will write detailed blog posts on these subjects. I also tried to participate in the gaming activities held at the event, but I felt I was kind of lost even if I was only playing for the very first minutes. This made me realize that I am really getting old for video games. Allen presending at TechMela Kathmandu, Nepal Allen’s session on Digital Photography was very impressive as he demonstrated so many features of the Windows Live Product that at one point I felt he is MVP for Windows Live. In fact, he demonstrated how all the Microsoft products work together to give users an excellent desktop experience; no wonder he is an MVP for Windows Desktop Experience. Pinal Dave presending at TechMela Kathmandu, Nepal Any event has two common dilemmas – food and logistics. However, this event had excellent food and state-of-the-art organization. I was very glad that this two-day event turned out to be one of the most successful events in Nepal. I also noticed that almost all attendees rate their experience as beyond expectation and truly exceptional. Pinal Dave and Allen Bailochan Tuladhar If you ever get invited by Allen in any of his event, I strongly suggest that you drop all your plans and scheduled stuff, and accept his invitation. For sure, the event will be a very memorable one and would be your once-in-a-lifetime experience. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

    Read the article

< Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >