Search Results

Search found 17924 results on 717 pages for 'z order'.

Page 529/717 | < Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >

• SFTP, SCP, Secure Webdav: which is the most suitable ?

  - by Xavier Maillard

  Hi, currently, I am hosting a webdav share setup in order to store files I need anywhere I am. It is available via HTTPS. Things are that I do not need all the HTTP machinery -i.e. my nginx http server is only there for this webdav folder. I am not sure I made the best choice. My requirements on the client side are: secured transfers mountable as a network drive at work with 'near realtime sync' usable for any OS I could use (including my mobile (android)) At first, I chose webdav since it would pass through my work proxy (which refuses all that is not on HTTP/S (port 80 or 443)). Today, I am not satisfied with the setup and even if nginx memory footprint is pretty small, its webdav support is not really "clean" and full. What would you recommend between SFTP, SCP and the current webdav solution ? I think SFTP is the closest solution but I still have to find out how to pass through my proxy ;) SCP seems quite limited as I read about it (only file transfers if I read right). Cheers

  Read the article

• 403 Error when accessing vhost directive

  - by Ortix92

  I'm having some troubles with setting up my webserver (Centos 5.8). It's a brand new server and I'm trying to set a vhost to the following dir: /home/exo/public_html However whenever I restart httpd I get the following warning: Code: Starting httpd: Warning: DocumentRoot [/home/exo/public_html] does not exist Yes the directory does exist. So whenever I visit the domain exo-l.com it gives me a 403 error. This is my config file (I put this inside my httpd.conf because the files in conf.d were not included for some reason. Or at least my newly created vhost conf file, but that has 0 priority for now) <VirtualHost *:80> DocumentRoot /home/exo/public_html ServerName www.exo-l.com ServerAlias exo-l.com <Directory /home/exo/public_html> Order allow,deny Allow from all </Directory> </VirtualHost I'm completely clueless because this should work as far as I know. httpd is being run as apache:apache i tried chowning the public_html directory (also recursively) to exo:apache, apache:apache, root:root with no success. chmod 777 doesn't do anything either. a tail from the log: [Sat Oct 13 15:10:04 2012] [error] [client 82.***.***.61] (13)Permission denied: access to / denied [Sat Oct 13 15:10:04 2012] [error] [client 82.***.***.61] (13)Permission denied: access to / denied I also found something about selinux and that disabling it might help, but do I really want to do that?

  Read the article

• (updated) Subfolder needs whitelist and standard redirect for all others

  - by Superstrong

  How can I allow access to the foo.html files in the .com/song/private/ subfolder for: a logged-in Wordpress user; or any referral domains (including subfolders) I add; or any URL on our own domain from the com/song/private folder; For all others, the user should be redirected to the corresponding public version of the Post, which is the same html filename and structured .com/song/foo.html. (The private versions uses a different template with different custom fields for each Post.) Update: Here's what I have so far: <Limit GET POST> order deny,allow deny from all allow from domain.com/song/private allow from otherdomain.com </Limit> RewriteRule ^(.*)$ ../$ [NC,L] More: Will that last rewrite rule take people back to the public version, from com/song/private/foo.html to com/song/foo.html? I found the following rule for detecting Wordpress logged-in status, but what do I put aferward with a RewriteRule, and will it work anyway? (If not, is there an alternative?) RewriteCond %{HTTP_COOKIE} !^.*wordpress_logged_in_.*$ N.B. I have added code to my root .htaccess allowing me to insert additional .htaccess files in other subfolders as needed. Copied from Stack Overflow, where they suggested I ask here.

  Read the article

• sys.dm_exec_query_stats interaction with recompilation

  - by Sam Saffron

  We use sys.dm_exec_query_stats to track down slow queries and queries that are IO offenders. This works great, we get a lot of very insightful stats. It is clear this is not as accurate as running a profiler trace, as you have no idea when SQL Server will decide to chuck out a an execution plan. We have quite a few queries where the wrong execution plan is cached. For example queries like the following: SELECT TOP 30 a.Id FROM Posts a JOIN Posts q ON q.Id = a.ParentId JOIN PostTags pt ON q.Id = pt.PostId WHERE a.PostTypeId = 2 AND a.DeletionDate IS NULL AND a.CommunityOwnedDate IS NULL AND a.CreationDate @date AND LEN(a.Body) 300 AND pt.Tag = @tag AND a.Score 0 ORDER BY a.Score DESC The problem is that the ideal plan really depends on the date selected (screenshot of ideal plan): However if the wrong plan is cached, it totally chokes when the date range is big: (notice the big fat lines) To overcome this we were recommended to use either OPTION (OPTIMIZE FOR UNKNOWN) or OPTION (RECOMPILE) OPTIMIZE FOR UNKNOWN results in a slightly better plan, which is far from optimal. Executions are tracked in sys.dm_exec_query_stats. RECOMPILE results in the best plan being chosen, however no execution counts and stats are tracked in sys.dm_exec_query_stats. Is there another DMV we could use to track stats on queries with OPTION (RECOMPILE)? Is this behavior by-design? Is there another way we can for recompilation while keeping stats tracked in sys.dm_exec_query_stats? Note: the framework will always execute parameterized queries using sp_executesql

  Read the article

• Installing sphinx on a web hosting server

  - by fiftyeight

  I want to install sphinx search on a web-hosting server. I'm on a Linux VPS with hostgator, but I never actually installed anything on a remote server so this will be a first time for me. If there's anyone here who installed sphinx it's really help me I had some problems when using sphinx on my PC with the permissions and the MySQL files, eventually I got it working on my PC. Anyway, I'd me really grateful if anyone can help me with some questions Do i need root access to install sphinx? I have root access to the server but I'd connect to it as a normal user since doing stuff as root is always less secure. can anyone tell me by what user I need to execute the indexer and the search daemon? Should I use root access in order to this? when I did it as a normal user on my PC it gave me some trouble with the PID file and the log files. last time I executed the search deamon I executed it as a normal user and it gave me some trouble, I created the folder /var/log/ for log files and did chmod 777 on it, but still when I executed the search daemon it created the PID file "searchd.pid" file but with no permissions for some reason, any idea why? Thanx in advance. fiftyeight

  Read the article

• How To Monitor Home Wireless Network Connected Devices Bandwith

  - by GWLlosa

  (Originally posted on SuperUser, not sure if it might be better suited here) I have in my home a standard Comcast cable internet connection. I have it going from the wall to a cable modem, and from the modem to a late-series Linksys router, which provides wired and wireless networking. The vast majority of the users are wireless connections. For day-to-day tasks, this connection is fully sufficient for all my needs. However, on regular occassions, we have social gatherings that involve many people bringing laptops and other PCs and using the network and internet simultaneously, frequently for gaming. I have no administrative oversight over these machines; they have been known to be riddled with spyware and/or bloatware or be running torrents, legal or otherwise. The only reason I care is that on a regular basis, one of the machines will flatline my internet bandwith, and consume it all in order to upload/download/spam people/whatever. When this happens, the latency of the connections for gaming and the like becomes unacceptable, and everyone suffers. My question is: Is there a system I can set up whereby I can easily monitor the various systems connected to my wireless connection, see how much bandwith each one is using, and for what ends? That way, at a glance, I can spot the offending machine and kick it from the connection, without having to go from machine to machine, checking each one's "bandwith used" properties manually, and dealing with the owner's indignant protests all the while. I understand this will likely involve 3rd-party software and/or hardware; my issue is I don't even know where to begin.

  Read the article

• How to connect to DB2 when the password ends with '!' in Windows

  - by AngocA

  I am facing a problem to use the DB2 tools when using generic account with a generated password which ends with the Bang sign '!' to connect to DB2 database. I am not allowed to change the password because it is already used by other processes. I know the user is valid and I can connect to the database with its credentials, but not from all db2 tools. When using the Control Center it is okay. When using the Command Editor (GUI) or the Command Windows, I got this error message: connect to WAREHOUS user administrator using ! SQL0104N An unexpected token "!" was found following "<identifier>". Expected tokens may include: "NEW". SQLSTATE=42601 Let's say that my password is: pass@! I am trying to use c:\>db2 connect to sample user administrator using "pass@!" or c:\>db2 connect to sample user administrator using pass@! And it both cases I got the same error message. I could change the way I connect but it is not useful for me, for example: c:\>db2 connect to sample user administrator Enter current password for administrator: But I cannot use it from a batch file easily. I would like to know how can I connect from the Command Editor, in order to use this user from the Graphical Tools. BTW, I know that the Control Center is deprecated.

  Read the article

• Remote access to phpmyadmin from computer belongs to same LAN

  - by Charles

  OK... I solved it. It is because I have not configured the httpd.conf to allow the centos listen port 80 and 8080. Listen 80 Listen 8080 I have setup the myphpadmin on my CentOS 6.4 recently. I can access and login to the myphpadmin on my localhost. However, when I type http://[hostipaddr]/phpmyadmin on my other computer in the same LAN with the CentOS, the browser simply cannot access the page. Below are some of the current configuration. Anyone can help please......? config.inc.php $i++; /* Authentication type */ $cfg['Servers'][$i]['auth_type'] = 'http'; /* Server parameters */ $cfg['Servers'][$i]['host'] = 'localhost'; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['compress'] = false; /* Select mysql if your server does not have mysqli */ $cfg['Servers'][$i]['extension'] = 'mysql'; $cfg['Servers'][$i]['AllowNoPassword'] = false; phpmyadmin.conf <Directory /var/www/html/phpmyadmin/> order allow,deny allow from all </Directory> Furthermore, I can access the webpage that stored in the CentOS from my other computer without problems. After using wireshark and tcpdump, I found that the server (the Cent OS) keep resetting the connection. (192.168.1.106 is my other computer, 192.168.1.101 is my CentOS) 23:29:42.281473 IP 192.168.1.106.55999 > 192.168.1.101.webcache: Flags [S], seq 2559409090, win 65535, options [mss 1460,nop,wscale 8,nop,nop,sackOK], length 0 23:29:42.281504 IP 192.168.1.101.webcache > 192.168.1.106.55999: Flags [R.], seq 0, ack 2559409091, win 0, length 0 I have disabled the iptables service on the CentOS already.

  Read the article

• How to see the properties of a DOM element as they change in realtime?

  - by allquixotic

  JavaScript code can update the properties/attributes of DOM elements in real time by responding to events and so on. Here is an example. In the table on that page, move your mouse over the cells. Notice how they change color when the mouse is on them, and the color goes away when you move the mouse to another cell. Now, using Firefox or Chrome (but not IE, Opera, etc.), I want to examine the background color, expressed in RGB or hex or whatever, of the cells updated in real time, as the mouse cursor enters and leaves the region and causes the JS to do its thing. The behavior that I observe, currently, is that the Inspect Element functionality of both Firefox and Chrome does not update the value of the properties as they are updated by JavaScript. So, in order to view the latest value of the property, I have to inspect the element again, and it takes a momentary "snapshot" of the values. But since the values only change while I have the mouse on them, I can't take a snapshot of the value I want while my mouse cursor is over the cell, because I have to remove my mouse from the cell to select the "Inspect Element" item in the right-click list! If it is possible to have the values updated in real time using either Firefox or Chrome, or an extension, on any recent version of the software (up to the latest stable), please provide instructions for doing so.

  Read the article

• Windows Vista Wrong Certificate With SNI

  - by JamesArmes

  I'm setting up SNI on an apache server and I thought things were going well. I have two URLs from different domains that point at the same site. I have one virtual host setup for each with the appropriate certificate for each. One of the certificates is valid but the other is self-signed (waiting on GoDaddy for the real cert). If I test the different URLs in Firefox, Safari and Opera all works well. I get no errors for the URL with the valid certificate and I get a self-signed warning for the other. However, in Internet Explorer 8 and Google Chrome, both URLs return the valid certificate (even if its not valid for the specific site). So for the one site, I get a valid certificate. For the other, I get a warning about the cert being for a different site. I tried switching the order of the vhosts and it made no difference. I know that Chrome and IE both use Window's HTTP stack so I understand why the behavior is the same for the two. What I don't understand is why I'm seeing this behavior.

  Read the article

• configuration issue with respect to .htaccess file on ubuntu

  - by Registered User

  I am building an application tshirtshop I have following configuration in /etc/apache2/sites-enabled/tshirtshop <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/tshirtshop <Directory /var/www/tshirtshop> Options Indexes FollowSymLinks AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> and following in .htaccess file in location /var/www/tshirtshop/.htaccess <IfModule mod_rewrite.c> # Enable mod_rewrite RewriteEngine On # Specify the folder in which the application resides. # Use / if the application is in the root. RewriteBase /tshirtshop #RewriteBase / # Rewrite to correct domain to avoid canonicalization problems # RewriteCond %{HTTP_HOST} !^www\.example\.com # RewriteRule ^(.*)$ http://www.example.com/$1 [R=301,L] # Rewrite URLs ending in /index.php or /index.html to / RewriteCond %{THE_REQUEST} ^GET\ .*/index\.(php|html?)\ HTTP RewriteRule ^(.*)index\.(php|html?)$ $1 [R=301,L] # Rewrite category pages RewriteRule ^.*-d([0-9]+)/.*-c([0-9]+)/page-([0-9]+)/?$ index.php?DepartmentId=$1&CategoryId=$2&Page=$3 [L] RewriteRule ^.*-d([0-9]+)/.*-c([0-9]+)/?$ index.php?DepartmentId=$1&CategoryId=$2 [L] # Rewrite department pages RewriteRule ^.*-d([0-9]+)/page-([0-9]+)/?$ index.php?DepartmentId=$1&Page=$2 [L] RewriteRule ^.*-d([0-9]+)/?$ index.php?DepartmentId=$1 [L] # Rewrite subpages of the home page RewriteRule ^page-([0-9]+)/?$ index.php?Page=$1 [L] # Rewrite product details pages RewriteRule ^.*-p([0-9]+)/?$ index.php?ProductId=$1 [L] </IfModule> the site is working on localhost and is working as if there is no .htaccess rule specified i.e. if I were to view a page as http://localhost/tshirtshop/nature-d2 then I get a 404 Error but if I view the same page as http://localhost/tshirtshop/index.php?DepartmentId=2 then I can view it. What is the mistake if any one can point out in above configuration, or else I need to check any thing else? sudo apache2ctl -M Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgi_module (shared) deflate_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) reqtimeout_module (shared) rewrite_module (shared) setenvif_module (shared) status_module (shared) Syntax OK I am using Apache2 on Ubuntu 12.04

  Read the article

• Nginx + WordPress + HHVM: Why isn't Batcache working? Would Varnish help even more?

  - by javipas

  I've heard great things about HHVM, so I've setup a copy of WordPress blog (on another domain) with Nginx (with the Pagespeed module) and HHVM. Right now the benefits are obvious: on the same config, load times are between two and three times faster. I'm trying to speed up things a little bit, and I've also installed Memcached and Batcache. I've installed the memcached package, copied object-cache.php (Pastebin) onto the root folder of the WordPress blog, and after that I've installed the Batcache plugin and copied the advanced-cache.php (Pastebin) file onto the wp-content folder. Also, I've included the line define('WP_CACHE', true); in the wp-config.php file. It seems it doesn't work, though. If I quickly reload the page several times Batcache should show the cached page, but it doesn't. It's easy to check that by reloading (Cmd+R on Chrome on OS X) the page several times and then viewing the page's code. Under the <head> section I should see some batcache stats, but they aren't there. I wonder if someone could give me some hint on this. On a side note, I don't know if I could add some other component in order to help the performance be even better. I'm thing about Varnish, but I'm not sure if it's just useless and it's just another way to the same I'm currently doing. Any other component there? (I'll test CDN for images, minifying js, etc and some other tricks as well, but I'm talking from the server perspective).

  Read the article

• Puzzling TCP performance over 3G / UMTS

  - by lemonsqueeze

  I'm using 3G as my primary internet connection, and TCP over this thing is getting more puzzling every day. For example: Downloading from kernel.org is crazy fast: $wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.6.8.tar.bz2 increases to ~500kB/s after a few secs ! Some servers are incredibly slow, for instance www.graphic-pc.com:Same thing, downloading a big file with wget it starts at ~30kB/s for a split second, then collapses to 5-10k or even worse. Web browsing is decent but somewhat unreliable. Randomly, a page will take really long to load or even fail to load, but a reload can succeed almost immediately. Now, by chance i started playing with OpenVPN over UDP on top of the 3G connection, and OMG suddenly everything's extremely fast !Same www.graphic-pc.com now shoots at 100-200kB/s ! What's going on here ??? How come it is so much better with the VPN than without ?? And why does graphic-pc.com crawl when kernel.org flies ?Something to do with my tcp stack (or the server), or some buggy router in between ?? Notes: Setup is laptop running Ubuntu Lucid and a Huawei 3G dongle (So direct pppd connection). I can reproduce this pretty much any time during the day and I'm not moving, so it's clearly not cell environment or internet congestion. (although kernel.org without VPN sometimes does worse in the evening, 60kB or so - but still 500kB with VPN !) For 2) wireshark shows retransmitted packets, dup ack's, even out of order sometimes. I've tried playing with different /proc/sys/net/ipv4 parameters (tcp_rmem, window_scaling, tcp_congestion...) doesn't seem to make a difference. Update: Tried under windows 7 (no VPN) with some interesting results: tcp settings : default tcp_optimizer kernel.org : 10 kB/s 20 kB/s graphic-pc.com: 8 kB/s 70 kB/s ! tcp_optimizer turned on ctcp among other things. Have to check what os graphic-pc.com is running, my bet is linux's tcp_westwood and ms ctcp don't mix well here...

  Read the article

• Serving images from another hostname vs Apache overload for the rewrites

  - by luison

  We are trying to improve further the speed of some sites with older HTML in order as well to obtain better SEO results. We have now applied some minify measures, combined html, css etc. We use a small virtualized infrastructure and we've always wanted to use a light + standar http server configuration so the first one can serve images and static contents vs the other one php, rewrites, etc. We can easily do that now with a VM using the same files and conf of vhosts (bind mounts) on apache but with hardly any modules loaded. This means the light httpd will have smaller fingerprint that would allow us to serve more and quicker, have more minSpareServer running, etc. So, as browsers benefit from loading static content from different hostnames as well, we've thought about building a rewrite rule on our main server (main.com) to "redirect" all images and css *.jpg, *.gif, *.css etc to the same at say cdn.main.com thus the browser being able to have more connections. The question is, assuming we have a very complex rewrite ruleset already (we manually manipulate many old URLs for SEO) will it be worth? I mean will the additional load of main's apache to have to redirect main.com/image.jpg (I understand we'll have to do a 301) to cdn.main.com/image.jpg + then cdn.main.com having to serve it, be larger than the gain we would be archiving on the browser? Could the excess of 301s of all images on a page be penalized by google? How do large companies work this out, does the original code already include images linked from the cdn with absolute paths?

  Read the article

• convert a pdf/djvu file to png's under Linux how?

  - by user62367

  Imagemagick doesn't work (Fedora 14) on one PDF file: $ convert -density 300 INPUT.PDF out.png Error: /ioerror in --showpage-- Operand stack: 1 true Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1878 1 3 %oparray_pop 1877 1 3 %oparray_pop 1861 1 3 %oparray_pop --nostringval-- --nostringval-- 141 1 319 --nostringval-- %for_pos_int_continue --nostringval-- --nostringval-- 1761 0 9 %oparray_pop --nostringval-- --nostringval-- Dictionary stack: --dict:1157/1684(ro)(G)-- --dict:1/20(G)-- --dict:75/200(L)-- --dict:75/200(L)-- --dict:108/127(ro)(G)-- --dict:288/300(ro)(G)-- --dict:22/25(L)-- --dict:6/8(L)-- --dict:22/40(L)-- Current allocation mode is local Last OS error: 27 GPL Ghostscript 8.71: Unrecoverable error, exit code 1 convert: Postscript delegate failed INPUT.PDF': @ error/pdf.c/ReadPDFImage/645.<br> convert: missing an image filenameout.png' @ error/convert.c/ConvertImageCommand/2953. $ And it doesn't work on a djvu file: $ convert -density 300 INPUT.DJVU out.png convert: no decode delegate for this image format INPUT.DJVU' @ error/constitute.c/ReadImage/532.<br> convert: missing an image filenameout.png' @ error/convert.c/ConvertImageCommand/2953. $ an extra: the output filenames. out-0.png out-1.png ... out-9.png out-10.png out-11.png .. out-123.png out-124.png is there a way to be like this?: out-000.png out-001.png ... out-009.png out-010.png out-011.png .. out-123.png out-124.png because they would be in wrong order: out-0.png out-1.png out-10.png out-11.png out-123.png out-124.png out-9.png thank you :\

  Read the article

• Failed none and iptables

  - by Michael

  The problem is that when I ssh to my host with putty and enter user name, after that the password prompt delays. Found this is directly related to my iptables and can solve by changing default policy to ACCEPT. If default INPUT policy is ACCEPT, then password prompt is coming immediately. Mar 13 00:05:01 server-ubuntu sshd[6154]: Connection from 192.168.0.10 port 26304 Mar 13 00:05:06 server-ubuntu sshd[6154]: Failed none for acid from 192.168.0.10 port 26304 ssh2 However, if default INPUT policy is DROP, I got slight delay in getting password prompt after I enter username Mar 13 00:07:12 server-ubuntu sshd[6177]: Connection from 192.168.0.10 port 26333 Mar 13 00:07:35 server-ubuntu sshd[6177]: Failed none for acid from 192.168.0.10 port 26333 ssh2 For the second case, I tried to set default policy for FORWARD and OUTPUT chains to ACCEPT, but it didn't help. The only rule in this case is: -A INPUT -i eth1 -m mac --mac-source 00:26:XX:XX:XX:XX -j ACCEPT 00:26:XX:XX:XX:XX is the mac address from which I am trying to ssh to server's LAN(eth1). I'm sure there has to be some rule, which I can use while default INPUT chain policy is DENY in order to get password prompt immediately. I realize that the error message in the log is something normal and part of some verification procedure.

  Read the article

• convert a pdf/djvu file to png's under Linux how?

  - by user62367

  Imagemagick doesn't work (Fedora 14) on one PDF file: $ convert -density 300 INPUT.PDF out.png Error: /ioerror in --showpage-- Operand stack: 1 true Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1878 1 3 %oparray_pop 1877 1 3 %oparray_pop 1861 1 3 %oparray_pop --nostringval-- --nostringval-- 141 1 319 --nostringval-- %for_pos_int_continue --nostringval-- --nostringval-- 1761 0 9 %oparray_pop --nostringval-- --nostringval-- Dictionary stack: --dict:1157/1684(ro)(G)-- --dict:1/20(G)-- --dict:75/200(L)-- --dict:75/200(L)-- --dict:108/127(ro)(G)-- --dict:288/300(ro)(G)-- --dict:22/25(L)-- --dict:6/8(L)-- --dict:22/40(L)-- Current allocation mode is local Last OS error: 27 GPL Ghostscript 8.71: Unrecoverable error, exit code 1 convert: Postscript delegate failed INPUT.PDF': @ error/pdf.c/ReadPDFImage/645.<br> convert: missing an image filenameout.png' @ error/convert.c/ConvertImageCommand/2953. $ And it doesn't work on a djvu file: $ convert -density 300 INPUT.DJVU out.png convert: no decode delegate for this image format INPUT.DJVU' @ error/constitute.c/ReadImage/532.<br> convert: missing an image filenameout.png' @ error/convert.c/ConvertImageCommand/2953. $ an extra: the output filenames. out-0.png out-1.png ... out-9.png out-10.png out-11.png .. out-123.png out-124.png is there a way to be like this?: out-000.png out-001.png ... out-009.png out-010.png out-011.png .. out-123.png out-124.png because they would be in wrong order: out-0.png out-1.png out-10.png out-11.png out-123.png out-124.png out-9.png thank you :\

  Read the article

• Why database partitioning didn't work? Extract from thedailywtf.com

  - by questzen

  Original link. http://thedailywtf.com/Articles/The-Certified-DBA.aspx. Article summary: The DBA suggests an approach involving rigorous partitioning, 10 partitions per disk (3 actual disks and 3 raid). The stats show that the performance is non-optimal. Then the DBA suggests an alternative of 1 partition per disk (with more added disks). This also fails. The sys-admin then sets up a single disk, single partition and saves the day. The size of disks was not mentioned but given today,s typical disk sizes (of the order of 100 GB), the partitions ; would be huge, it surprises me that a single disk with all partitions outperformed. Initially I suspect that the data was segregated and hence faster reads. But how come the performance didn't degrade as time went by with all the inserts and updates happening? Saw this on reddit, but the explanation was by far spindle/platter centered. There was no mention in the article about this. Is there any other reason? I can only guess that the tables were using a incorrect hash distribution causing non-uniform allocation across disks (wrong partitioning); this would increase fetch times. Any thoughts?

  Read the article

• data transfer rate anomaly (internet)

  - by Nrew

  I tested my internet speed at speedtest.net. And go the result. .42Mbps Download and .21 Upload rate. My classmate got the same download speed of .42Mbps but has .87Mbps upload rate. Does upload rate affect the transfer rate?Because even though we got the same download speed. His transfer rate is about 100kbps downloading a movie from a torrent. And mine is only about 47kbps. Also the same torrent. And even direct download its always 47kbps. Is it possible to tweak something in order to have higher transfer rates. Other details: Were also both using the same ISP. The same slow ISP. And it seems that he's getting the most out of his connection even if his plan is lower than mine. I just don't know why I'm a loser at this. And when I try to complain to the ISP. They say that I'm getting the minimum speed and its okay. That really sucks. And I'm not using any router, so is he. The computer is directly connected to the internet using the modem provided by the ISP.

  Read the article

• OpenVPN + iptables / NAT routing

  - by Mikeage

  Hi, I'm trying to set up an OpenVPN VPN, which will carry some (but not all) traffic from the clients to the internet via the OpenVPN server. My OpenVPN server has a public IP on eth0, and is using tap0 to create a local network, 192.168.2.x. I have a client which connects from local IP 192.168.1.101 and gets VPN IP 192.168.2.3. On the server, I ran: iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On the client, the default remains to route via 192.168.1.1. In order to point it to 192.168.2.1 for HTTP, I ran ip rule add fwmark 0x50 table 200 ip route add table 200 default via 192.168.2.1 iptables -t mangle -A OUTPUT -j MARK -p tcp --dport 80 --set-mark 80 Now, if I try accessing a website on the client (say, wget google.com), it just hangs there. On the server, I can see $ sudo tcpdump -n -i tap0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 96 bytes 05:39:07.928358 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 558838 0,nop,wscale 5> 05:39:10.751921 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 559588 0,nop,wscale 5> Where 74.125.67.100 is the IP it gets for google.com . Why isn't the MASQUERADE working? More precisely, I see that the source showing up as 192.168.1.101 -- shouldn't there be something to indicate that it came from the VPN? Edit: Some routes [from the client] $ ip route show table main 192.168.2.0/24 dev tap0 proto kernel scope link src 192.168.2.4 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.101 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.1.1 dev wlan0 proto static $ ip route show table 200 default via 192.168.2.1 dev tap0

  Read the article

• Random keyboard malfunction - happens in Vista and XP

  - by Stupefy101

  For some weird reason, some of my keyboard keys of my deskop are acting very strangely. I don't remember a certain time when it started and I can't recognize any pattern as to when it happens and when it doesn't. The problem occurs in Windows XP, XP Safe Mode, Vista, and Vista Safe mode (I have a dual boot system) Here's what's happening: When I push the I, K, comma, or 8 keys (notice how they are all in the same column), instead of just getting that character, I get extra characters afterwards. For example, I'll push the k key and it will print "ksfda", pushing "I" gives me "IWREQ", comma gives me ", xvcz", pushing 8 gives me "82431". There are a couple things that I have noticed: It does not happen every time I push the key It happens in all OS and applications I have tested The characters coming after the desired ones are in the same pattern (column order: 2, 4, 3, 1 from the left of the keyboard in the same row as the key pressed. Pressing "]" will sometimes give me "]t", and if done in Notepad, will bring up the "Find" dialog window I cannot seem to remember a specific time the problem started, although I have been defragging, using TuneUp Utilities + CCleaner, and installing lots of new programs lately.

  Read the article

• How could I embed formatted XML source in WORD documents?

  - by eckes

  I'm writing a documentation with WORD that contains XML source code (whole files) as examples. The way I'm embedding the currently XML is quite cumbersome and doesn't seem to me as really maintainable: I'm finishing the editing of the document in WORD and create a PDF from it using Acrobat next, I open my XML files (2x input files, 2x generated output files) with IE and print them with the PDF printer supplied by Acrobat now, I open up Acrobat Pro and attach the four XML-PDF files to my original document The problem with that work flow for me is that it involves too much manual labor in order to get the documentation done. What I've tried up to now is not really satisfying for me: converting each XML to PDF and appending them like described above opening the XML files with SCiTE, copy as RTF and paste into Word playing around with the LaTeX packages minted, pygments and listings (I could write the docs with LaTeX too) but found some unsolvable problems in each of these packages I'm searching for a way that produces my documentation more automatic. For example embedding the XML files including formatting of IE (which I find quite readable). The files should be included by reference so that I don't have to paste the XML sources manually every time the XML changes.

  Read the article

• Connecting to a subdomain severs the connection to the domain itself. What's going on?

  - by TheAgent

  Hi all. We have a website on a third-party server (server leased and shared with other websites) and the server provides access to our SQL Server database through a subdomain in the form of mssql.DomainName.com. I was told to use SQL Management Studio Express to connect to this subdomain in order to manage the database. After a few tries and getting many "Timeout" messages, I finally manage to connect to the server; everything's fine. But now I can't connect to DomainName.com anymore. Trying to browse DomainName.com using Firefox, it tries to "lookup" DomainName.com address and fails, telling me "the server was not found". I have to disconnect Management Studio from the server and wait a couple of hour for DomainName.com to become available again, and after that, trying to reconnect to the SQL Server again repeats the scenario. While I can't browse DomainName.com directly, I can use a proxy to connect to it, meaning that the problem is somehow related to a DNS my computer tries to ask to translate the name to the corresponding IP. Anyone seen anything like this before? Any ideas? Thanks in advance.

  Read the article

• What Windows app can sort a huge XML file?

  - by Torben Gundtofte-Bruun

  I have some enormous XML-based configuration files, with 125000 lines in them. The problem is that they are auto-generated by the system I use, and "child" tags are in a random order within their respective parent tag. This means that a diff comparison is impossible. I want to recursively sort all tags within a parent tag by the value in name="". Some parent tags only appear once and don't have a name="" parameter; these should be sorted by the tag name itself. Once the files are sorted like this, they can be compared quite easily using normal tools. We are currently using ExamXML which can match unsorted XML files, but it fails because the files are too big. Is there an application that can do this? (Windows much preferred; Linux only as a last resort) I do not want to dive into development or XSLT jobs. I am thinking that someone must have made a simple sorting tool like this already - I just can't find it using Google. Update: With help from this site, I created a small package that I want to share: XML-Sorter_v0.3.zip Update: Follow-up question here.

  Read the article

• How to setup RAID 1 with Intel RST on an existing Windows 7 system?

  - by instcode

  I'd like to setup RAID-1 using Intel Rapid Storage Technology on my Windows 7 64-bit system. I have an 1TB SATA HDD with Windows 7 system installed on the first primary partition (leftmost, ~200GB). The rest of this HDD is unallocated (~800GB). I bought another 2TB SATA, then created a primary partition (leftmost, ~500GB) and filled my data in. The rest of this HDD is unallocated (~1.5TB). A quick disk layout (XXX is the unallocated region): HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXXXXXXXX ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXXXXXXXX ] Now, I want to create a 500GB RAID-1 partition (I'm not sure if using "partition" is correct here) on the rightmost of the 2 HDDs above without losing any existing data from both disks. Here is the expected layout: HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXX | 500GB D:\ DATA - RAID-1 ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXX | 500GB D:\ DATA RAID-1] Let's not concern about data lost, is it possible to have that final layout using Intel RST? Previously, I tried this layout using dynamic disk & software RAID from Windows and it worked as expected, however, it's quite ugly in resynching after an OS failure that I don't want. If yes, is there a way to keep the data on existing partitions untouched or, at least, it should keep the SYSTEM partition safe (I'm okay if the PROGRAM partition has to be gone.)? Well, are there any strict/special steps I should follow when using the Intel RST manager in order to achieve that? If none of those questions above are "Yes", could you please suggest some other possible layouts that leave the C:SYSTEM partition untouched?

  Read the article

< Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >