Search Results

Search found 1427 results on 58 pages for 'amd phenom'.

Page 53/58 | < Previous Page | 49 50 51 52 53 54 55 56 57 58  | Next Page >

  • Can a VM perform better when only two cores instead of four cores are presented to it?

    - by arcain
    We had a VMWare VM at work with two cores allocated to it that ran a pretty heinous process in IIS. Under load the process was maxing out the CPU usage on both cores, so we asked our system engineers to present the other two cores of the physical processor to the VM. The engineer immediately said that this would not improve performance at all, but would make the VM perform worse. That statement didn't make much sense to me, and I'm wondering how what the engineer said could be true. Are there actually cases where four cores presented to a VM would cause worse performance than two cores on the same physical hardware? Let's assume an ideal situation where there's only one VM on the host server, so nothing is being shared with other OS instances. I believe the physical server had a single quad core processor, and was most likely hosting multiple VMs. I don't really know what version of ESX was running on the host, nor do I know with certainty what the physical processor config was, but from within the VM I had access to, I saw two 3.33 GHz AMD processors. In the end, I never got to test the engineer's assertion out because (while we were trying to get the VM upgraded) we were able to optimize the process and reduce it's CPU consumption, and 2) we ended up migrating to a different VM on another ESX server which had four cores presented to it.

    Read the article

  • How to fix Windows 7 device removal notification loop

    - by Barry Kelly
    Bit of an odd one this. One of our PCs is getting caught in a loop some time after being turned on, usually after a USB storage device has been attached - sometimes an iPod, sometimes a GPS. Specifically, Windows Explorer starts showing a drive icon and letter (E:, as of right now) for the System partition (the small hidden one at the start of the boot drive). Then, the icon disappears. Then it reappears again. And disappears. It does this very quickly, at what looks like maybe 50 times a second. CPU usage in this loop is also very high; averages about 66%. This machine has an i7 920 CPU, which is quad core with hyperthreading; so this usage rate works out to about 5 100% busy threads, along with whatever normal idle load is (particularly Task Manager itself). Inspecting with Process Explorer shows that the device removal notification infrastructure has gone berserk. The threads in system service processes (i.e. apart from Windows Explorer) which are using all the CPU power relate to device notification. The Disk Management MMC snap-in also fails to run when the loop starts. The only way to break the loop, it seems, is to reboot the machine. Anyone seen anything similar to this, and know of a way to fix it? Machine details: Windows 7 x64, fully patched i7 920, 12GB RAM Intel SSD 80GB (X25-M, I believe; not G2) 2TB 5.2K disk for bulk storage AMD HD 5870 Further hardware details await. I'm going to go through and update all drivers I can find.

    Read the article

  • How to fix missing RAID1 drive

    - by Sodved
    I had to do some fiddling about with my cables inside thebox and now I am getting a "Critical Error" about the RAID disks during startup. I have a gigabyte GA-MA770T-UD3 motherboard. Aparently the RAID controller is an AMD SB710 chip. I'm pretty sure I know what happenned. The first time I rebooted I had forgotten the power cable on one of the disks in the RAID1 (mirror) and let it boot up. So I shut down and put the power back in. So now when it boots up I go into the RAID admin interface (between the BIOS screen and the OS loading): it shows the RAID1 as in error the logical device has one disk and says the other is disconnected or missing the other physical disk shows up as a single disk If I boot to the OS (Windows 7 32 bit) the data all seems to be there. If I go into computer management it says my partition is on a disk and working OK. But the other disk is offline because: "The disk is offline because it has a signature collision with another disk that is online" So I am guessing because I STUPIDLY booted up with only one of the disks powered on, the other disk fell out of synch with the mirror and so now cannot rejoin the mirror. How do I fix this? I want to get the RAID1 mirror working again. There does not appear to be any "Repair" option in the basic RAID admin tool which I get into during startup before the OS boots. I have not made any explicit changes to the online one (but I guess the OS has probably written some admin data).

    Read the article

  • Inexpensive (used) hardware for Xen virtualization test?

    - by Jason Antman
    Virtualization is one of the areas where I could really use some experience. I also run quite a few services (web, mail, dns, etc.) out of my home. Since most of my hardware is getting a bit old (I'm running on stuff that was surplused years ago...) I decided that it's about time I start renewing some things, and also play around with virtualization a bit more. My plan is to setup a SAN box (simple iSCSI target, relatively inexpensive gigE switch), get a pair (for starters) of new servers, and start building some new stuff with Xen, specifically planning on playing with live migration and full virtualization. Does anyone have recommendations for used, older "servers" (really anything in a rack-mount form factor, I'm not too worried about things like iLO/iLOM for the test nodes) that support VT-x/AMD-V? I'm biased to HP, but it looks like they didn't make Proliants with VT-x/Vanderpool processors until G6 (for the DL360) or so, which is way out of my price range. I'm looking in the sub-$300 range (or less, if possible), used, probably Ebay. Any recommendations are greatly appreciated. Edit:And, to catch this before the comments start coming - these are personal systems. I have first-generation Proliants still in use (I got them as corporate surplus in 05, they've been running since then, and probably were running since 01 or 02 prior to being sold). I don't need anything shiny and new - I've got a bunch of old boxes, at least one complete replacement for every model in use, and that's fine for me (and easy on the wallet).

    Read the article

  • Nvidia 9800GT randomly prevents computer from booting

    - by Blender
    My computer has been running Windows and Linux perfectly fine with my 9800GT for the past year or so, but today it refused to boot. When I press the power button, this is what happens: Power button flashes once. Fans whir. Graphics card makes clicking noise. Computer reboots. Go back to 1. The cycle just keeps going, and I have to yank the cord to make the computer stop. After about 30 attempts at booting it, the computer powers on and everything works. I'm pretty sure that the graphics card isn't malfunctioning, as I've been GPU computing on it for a while now without any hiccups. But the strange thing is, the computer boots perfectly fine in only 5 boots if I remove the card. The computer is a HP Pavilion a6028x Desktop PC: Processor: AMD Athlon 64 X2 (W) 4600+ 2.4 GHz (AM2 socket) Motherboard: ECS MCP61PM-HM (Nettle 1) RAM: 3GB DDR2 (two different brands) More specs here Does anybody know what could be the problem? Any help or information would be greatly appreciated!

    Read the article

  • Linux can dual display but windows can't?

    - by Mr_CryptoPrime
    I have two monitors, one that is hdmi-to-dvi and the other vga-to-dvi. I have an AMD HD Radeon 6900 series graphics card installed. I got Ubuntu to display dual monitors, but then I restarted for an update and then Ubuntu wouldn't even boot in recovery mode, it just kept cycling forever...displaying something about "timeout: killing [filepath] [hexadecimal]. So I tried booting into windows (7-professional) and it crashed and displayed this after rebooting: IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT-IN-NONPAGED-AREA. I went into Bios and reverted to the system defaults and ran system restore and it booted ok, but the dvi-to-dvi monitor would not display. I made sure my drivers were updated and catalyst was updated. Also through research discovered only one is for vga and the other is digital only, so I put the vga-to-dvi in the vga slot and so on. Neither windows or catalyst will detect the dvi-to-dvi montior. Any suggestions? Thanks. EDIT: Found out that booting into Ubuntu with only one monitor (using either monitor with either cable) worked perfectly fine. I could then add another monitor and it displays ok. However, it will, out of the blue, suddenly distort the display. At first I thought the computer crashed, but it is something with the video output from the GPU to the monitor because I pushed the power button and it would refresh every 5secs or so and I could see the "Ubuntu will power down in X seconds", even though it was horribly distorted. Any ideas what's causing this?

    Read the article

  • Ubuntu 12.04 VirtualBox on powerful W7 quite slow

    - by wnstnsmth
    I own a Thinkpad T420s with 8GB RAM, 160 GB SSD and a quite fast i7 processor. Summa summarum a very fast computer that works perfectly. Now, I am not very impressed by the performance of my Ubuntu 12.04 virtual machine running on VirtualBox 4.1.18. I assume that Virtual Machines are always a bit slower than the guest system, still I think it should be more performant given the hardware settings I give it: 4096 MB RAM 1 CPU without CPU limitation (I would like to give it more but then it does not seem to work - I am not experienced in this maybe somebody could give me advice on this too) Activated PAE/NX, VT-x/AMD-V and Nested Paging 96 MB Graphics Memory (no 2D or 3D acceleration) ~ 14 GB disk space, currently about 7 GB are used Maybe I misconfigured something, could you give me a hint please? Thanks! Edit: What I mean by slow is that for example switching tabs in the browser (whether FF or Chrome) only goes with a 0.5s delay or something, as well as switching application windows and/or double-clicking applications in the dock to get all open windows.. opening Aptana takes about a minute whereas opening something like Photoshop on the guest system takes 5 seconds

    Read the article

  • how can a web page change my mouse speed?

    - by Tekaholic
    I usually have many tabs open in Firefox and I haven't been able to find one specific website that causes this because I don't seem to notice it right away. I'm going to click on something on my desktop and I am lifting up the mouse several times to get across the screen. It doesn't seem to matter what program I might be using because this happens on all desktops and in Firefox, too. So I go in my settings and I turn up the mouse speed all the way and it's still not really acceptable. It doesn't matter if I click on different tabs but when I close the browser, my mouse is way too sensitive, like I'd expect at the max setting. Then I go back to Control Center and return my mouse speed and acceleration to normal. When I restart my browser, the mouse remains normal. So is there something to this before I start wasting my time hunting through my history to discover which website or sites are having this effect? ...and if it is a specific site and I locate it, what can I change to stop it's effect on my mouse besides not visiting it? I am using Linux Mint 13 on a box with an AMD Athlon processor and 2gigs of ram. I never installed another browser because everything works for me.

    Read the article

  • How many iptables block rules is too many

    - by mhost
    We have a server with a Quad-Core AMD Opteron Processor 2378. It acts as our firewall for several servers. I've been asked to block all IPs from China. In a separate network, we have some small VPS machines (256MB and 512MB). I've been asked to block china on those VPS's as well. I've looked online and found lists which requires 4500 block rules. My question is will putting in all 4500 rules be a problem? I know iptables can handle far more rules than that, what I am concerned about is since these are blocks that I don't want to have access to any port, I need to put these rules before any allow. This means all legitimate traffic needs to be compared to all those rules before getting through. Will the traffic be noticeably slower after implementing this? Will those small VPS's be able to handle processing that many rules for every new packet (I'll put an established allow before the blocks)? My question is not How many rules can iptables support?, its about the effect that these rules will have on load and speed. Thanks.

    Read the article

  • vmware server 64 bit on ubuntu 9.10 64 bit with P2V windows 2003 SBS poor network speed

    - by RobertHC
    configuration is ubuntu 2.6.31-21 64 bit vmware 2.0.2 64 bit last release hardware is core 2 quad with 8GB ram guest is win 2003 server SBS 32 bit Dear friends, we have a converted physical to virtual windows sbs 2003, converted with last converter available nowadays http://www.vmware.com/products/converter/ vCenter converter. Running the P2V 2K3 SBS on vmware server, it does boot fine, but we do note an abnormal CPU activity and a poor lan speed. As attempts we did what follow. We removed all unneeded peripherals, we removed one NIC (phisycal server was 2 nics), we changed the vmx to ged the nic recognized as intel instead than amd, we removed 1 cpu (physical was 2 cpu), we removed anything was reported as failed driver from system events monitor. Nothing to do, no way and funny results. Let's read some tests results. All are made with the same file copied in different source folders. Copying from client side (both directions copy, to/from server) results are i.e. 10 seconds, copying the same files from server side (again from and to server) results are different... from client to server, speed is round about (bit more) 10 seconds, but from server to client direction is slower: double the time. Beeing very fast and launching a simultaneous copy "from server to client"+"from client to server", this made from the server side, results in a stuck traffic... 45 seconds to do the copy. vmware tools are installed and e1000 driver has been updated. With one processor CPU activity is still going up and down but much less than with two. Because of test, we installed win 2k8 STD 64 bit. We repeated all the above tests with exactly the same file result is just one: always 5 seconds (this matches the lan speed) Any idea about this issue is welcome and thank you if any. Kind regards R.

    Read the article

  • What could possibly cause my computer to power down at random times?

    - by geoffreydv
    I have recently bought a new Power Supply and a new graphics card. My PC ran smoothly for a few months now but since a couple of days I'm having a strange problem. I am trying to isolate the problem to a specific piece of hardware (because if it's either the Power Supply or the Graphics card they are still under warranty). The problem started when I was playing a game (diablo 3). My PC suddenly powered down. I was unable to turn it on again by pressing the power button. I unplugged the power cable for a few seconds and plugged it back in. This time the pc powered on but the indication light turned orange instead of white as it normally does. The fans were not spinning and I did not see anything on my screen. After trying a couple of times I gave up. Two days later I tried again and this time the PC did boot up as usual. Everything looked okay until I tested if the problem was resolved by starting Diablo again. After about two minutes it powered down again as it did the first time. If I don't run any games my PC does power down after about 3-5 hours. Another fact that might be relevant: One time the PC did not shut down immediatly, instead first my graphics "powered down" but the music I was playing kept on playing. After about 20 seconds the pc powered down completely as usual. What I also noticed is that when I boot instantly after a power down, the chance of another power down occuring is much higher. Does anyone have an idea what could be causing this kind of behaviour or has a certain tool to diagnose the specific hardware parts? Thanks Specs: Memory: 6GB Processor: Intel i5 OS: Windows 7 64 bit The PC is a Dell Studio XPS 8100 with a replaced PSU and Graphics card: PSU: Corsair CX500 (500 watt) Graphics card: AMD Radeon 6850

    Read the article

  • Fixing bent pins on a CPU

    - by Pekka
    While replacing a mainboard in a desktop machine (see related question), I did something stupid. I inserted the CPU into the new mainboard, but didn't check for the right position. When it didn't immediately lock in, I pressed slightly before realizing what was wrong. The result was a number of bent pins. I tried every tutorial that popped up when Googling "CPU bent pins" - using credit cards, sewing needles, and a hunting knife to get the pins back into position - but to no avail: For every pin I get straightened out, two others are bent. I have no problem getting individual pins straightened out, but my many attempts have led to many pins being slightly askew - enough for the CPU not to fit into the socket (An AMD X3 one). Maybe I just lack the motoric finesse. What I would need is some sort of a grid to fix all pins at once. It's a €50 processor so the loss is not catastrophic. But I thought before I go buy a new one, I thought I'd check here whether anybody knows some magic trick, or a cheap generally-available tool to fix this.

    Read the article

  • Which Windows 8 tool should I use to "read", "upload", my Windows 7 latest backup DVD (is it possible?)

    - by Robert
    Which Windows 8 tool should I use to "read", "upload", my Windows 7 latest backup DVD (is it possible?). I've just installed W8 and haven't made any changes to my new ecosystem and, what happened was that, as I was managing my new drivers, some mess* occurred, I confess, and now what I have left is every single backup tool I made use of W7, like system images, restore dvds, backup up to date monthly and so on, and would like to keep in touch with W8. I'm one of those with problems managing the amd switchable gpu drivers. Now I want to stay with W8 (download version - didn't clean install) but with my old personal files. I don't care to programs updates. I got everything original on dvds, of my interest. Yesterday I tried refreshing W8 once but didn't work. Maybe trying again tonight. What would you guys do in my place, please? *the mess I am talking about is to have disabled my intel (the only driver left) gpu in device manager tool in W8. I got black screen on system boot. Cheers, C.C.

    Read the article

  • Computer makes hissing noise, turns off after few seconds

    - by Kaustubh P
    I have a problem similar to the questions posted here and here. This is my config: Asus M3N78-EM, with AMD Phenom X3 720 2800 Black Edition, 4GB Transcend DDR2 RAM, Nvidia 9400GT. HD is a 160 GB IDE, and a LG IDE DVD-ROM. The power button is a bit off, I have removed the cover of the switch, and the only way it turns on is just giving the "stick" under the cover a gentle press. It turns on sometimes, and at other times, I have to cut-off the power from the PSU, and try again. I will describe my problem in as detail as possible, please bear with me: The problem has started in the last week, a few months after I changed the to the powerswitch arrangement as described above. The PC makes a hissing noise, and I wasn't able to pin-point the noise source, because of the various other fans. At first, removing the HD, rebooting w/o the HD, turning it off, reconnecting and booting made the problem go away. But of late, it doesn't happen. As suggested in the other questions, I tried reducing the load by disconnecting both the IDE drives, and the problem (noise + turn-off) still occurs. I also connected another 80G IDE HD,today morning, adn it still made that noise, and turned off. I also opened up the PSU, but I couldn't see any fault in that, I tried rotating the fan by blowing into the blades, and with my fingers, but the hissing noise didn't come from there. Or maybe the speed wasn't enough to evoke that noise. A few weeks ago: I had cleaned the Cabinet and had repasted the processor and its fan using some thermal paste. Could that be at fault? I also used a vacuum to blow the dust out of the PSU, could the power have been too much, to maybe offset the fan or something? A label on the PSU says it uses a ball-bearing fan. That only leaves me with the Processor fan and the processor itself. I didn't try removing the processor fan and processor from the motherboard, and then turning the PC on, fearing damage. Will doing so cause any damage? What can I do to localize and pin-point the problem? Also, after a few tries, the Computer starts up. Sometimes it turns of within 2 seconds, sometimes after the POST. Once it turned off at the grub. Another time it booted completely and then turned off. The only way to ensure that the PC wont turn off, is if the hissing noise stops. EDIT: I suspect it to be the Processor/Processor fan, owing to the source of noise. All the config, except for the Cabinet, is just over a year old. EDIT2: I also just remembered, that I had set the "On-power resume" to turn on, i.e. If I supply he PC with power, it will turn itself on, w/o me needing to press the switch. I had done that to workaround the faulty power-switch, as noted above. EDIT3: I calculated the power my system needs, from the antec site, and I just arrived at 292W

    Read the article

  • My computer freezes irregurarly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 50-60. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) My current to-try list Change the thermal paste on my CPU. Change my graphic card with a temporary one and stress the computer. Change my power supply. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • Failling install Ralink RT5592 driver on Ubuntu 14.04 LTS

    - by atisou
    My problem concerns the installation of a wi-fi driver (RT5592) for my new wi-fi adapter (PCE-N53) on my newly built computer. Basically, I don't manage to get the driver installed and therefore I cannot get the wifi to work. I know I am not the only one having this issue this year, between RT5592 driver and Ubuntu 14.04 LTS, in one way or the other. Is there anybody who has ever been able to fix this problem? It does not look like on all the posts I have been through... Following an answer to a same problem as mine (I was getting the same error message as Christopher Kyle Horton of "incompatible types" etc), I have applied the instructions and done the editings in a script as suggested by Paul B. Unfortunately I still do get error/warnings message (a different one this time) at the end of the make and the wi-fi still does not work. Below is a snapshot of the end of the message: In file included from /home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/include/os/rt_linux.h:31:0, from /home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/include/rtmp_os.h:44, from /home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/include/rtmp_comm.h:69, from /home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/pci_main_dev.c:31: include/linux/module.h:88:32: error: ‘__mod_pci_device_table’ aliased to undefined symbol ‘rt2860_pci_tbl’ extern const struct gtype##_id __mod_##gtype##_table \ ^ include/linux/module.h:146:3: note: in expansion of macro ‘MODULE_GENERIC_TABLE’ MODULE_GENERIC_TABLE(type##_device,name) ^ /home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/pci_main_dev.c:73:1: note: in expansion of macro ‘MODULE_DEVICE_TABLE’ MODULE_DEVICE_TABLE(pci, rt2860_pci_tbl); ^ cc1: some warnings being treated as errors make[2]: *** [/home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/pci_main_dev.o] Error 1 make[1]: *** [_module_/home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.13.0-32-generic' make: *** [LINUX] Error 2 The full pastebin data: paste.ubuntu.com/8088834/ It looks from the message that one would need to edit manually some of/other scripts in the driver package, as did Paul B suggest in one case. But I have no idea how to do that. Here is the driver package of the wifi adapter: www.asus.com/uk/Networking/PCEN53/HelpDesk_Download/ My system is as following: OS: ubuntu 14.04 LTS wi-fi card: Asus PCE-N53 motherboard: Asus KCMA-D8 processor: AMD Opteron 4228 HE kernel: 3.13.0-32-generic Following this info from chili555 in here, below are some extra info about my system: lspci -nn | grep 0280 gives 04:00.0 Network controller [0280]: Ralink corp. RT5592 PCI2 Wireless Network Adapater [1814:5592] and sudo apt-get install linux-headers-generic returns linux-headers-generic is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. If this is a kernel version (I have 3.13.0-32-generic) incompatibility issue with the driver as chilli555 suggests (the README file in the driver package says indeed it is compatible with kernel 2.6), how could one trick this around to make it work? that should be possible right? On ubuntu forums, the patches proposed dont work (leads the computer to freeze). Basically: is there anybody out there who has ever been able to make a PCE-N53 work on Ubuntu 14.04 LTS (kernel 3.13)? how shall I edit the driver package to make it work for my kernel?

    Read the article

  • cannot make ubuntu 64-bit v12.04 install work

    - by honestann
    I decided it was time to update my ubuntu (single boot) computer from 64-bit v10.04 to 64-bit v12.04. Unfortunately, for some reason (or reasons) I just can't make it work. Note that I am attempting a fresh install of 64-bit v12.04 onto a new 3TB hard disk, not an upgrade of the 1TB hard disk that contains my working 64-bit v10.04 installation. To perform the attempted install of v12.04 I unplug the SATA cable from the 1TB drive and plug it into the 3TB drive (to avoid risking damage to my working v10.04 installation). I downloaded the ubuntu 64-bit v12.04 install DVD ISO file (~1.6 GB) from the ubuntu releases webpage and burned it onto a DVD. I have downloaded the DVD ISO file 3 times and burned 3 of these installation DVDs (twice with v10.04 and once with my winxp64 system), but none of them work. I run the "check disk" on the DVDs at the beginning of the installation process to assure the DVD is valid. When installation completes and the system boots the 3TB drive, it reports "unknown filesystem". After installation on the 250GB drives, the system boots up fine. During every install I plug the same SATA cable (sda) into only one disk drive (the 3TB or one of the 250GB drives) and leave the other disk drives unconnected (for simplicity). It is my understanding that 64-bit ubuntu (and 64-bit linux in general) has no problem with 3TB disk drives. In the BIOS I have tried having EFI set to "enabled" and "auto" with no apparent difference (no success). I never bothered setting the BIOS to "non-EFI". I have tried partitioning the drive in a few ways to see if that makes a difference, but so far it has not mattered. Typically I manually create partitions something like this: 8GB /boot ext4 8GB swap 3TB / ext4 But I've also tried the following, just in case it matters: 8GB boot efi 8GB swap 8GB /boot ext4 3TB / ext4 Note: In the partition dialog I specify bootup on the same drive I am partitioning and installing ubuntu v12.04 onto. It is a VERY DANGEROUS FACT that the default for this always comes up with the wrong drive (some other drive, generally the external drive). Unless I'm stupid or misunderstanding something, this is very wrong and very dangerous default behavior. Note: If I connect the SATA cable to the 1TB drive that has been my ubuntu 64-bit v10.04 system drive for the past 2 years, it boots up and runs fine. I guess there must be a log file somewhere, and maybe it gives some hints as to what the problem is. I should be able to boot off the 1TB drive with the 3TB drive connected as a secondary (non-boot) drive and get the log file, assuming there is one and someone tells me the name (and where to find it if the name is very generic). After installation on the 3TB drive completes and the system reboots, the following prints out on a black screen: Loading Operating System ... Boot from CD/DVD : Boot from CD/DVD : error: unknown filesystem grub rescue> Note: I have two DVD burners in the system, hence the duplicate line above. Note: I install and boot 64-bit ubuntu v12.04 on both of my 250GB in this same system, but still cannot make the 3TB drive boot. Sigh. Any ideas? ========== motherboard == gigabyte 990FXA-UD7 CPU == AMD FX-8150 8-core bulldozer @ 3.6 GHz RAM == 8GB of DDR3 in 2 sticks (matched pair) HDD == seagate 3TB SATA3 @ 7200 rpm (new install 64-bit v12.04 FAILS) HDD == seagate 1TB SATA3 @ 7200 rpm (64-bit v10.04 WORKS for two years) HDD == seagate 250GB SATA2 @ 7200 rpm (new install 64-bit v12.04 WORKS) HDD == seagate 250GB SATA2 @ 7200 rpm (new install 64-bit v12.04 WORKS) GPU == nvidia GTX-285 ??? == no overclocking or other funky business USB == external seagate 2TB HDD for making backups DVD == one bluray burner (SATA) DVD == one DVD burner (SATA) 64-bit ubuntu v10.04 has booted and run fine on the seagate 1TB drive for 2 years.

    Read the article

  • Enabling OUD Entry Cache for large static groups

    - by Sylvain Duloutre
    Oracle Unified Directory can take advantage of several caches to improve performances. especially the so-called database cache and the file system cache. In addition to that, it is possible to use an entry cache to cache LDAP entries. By default, the entry cache is not used. In specific deployements involving large static groups, it may worth loading the group entries to the entry cache to speed up group membership and group-based aci evaluation. To do so, run the following commands: First, specify which entries should reside in the entry cache. In the commad below, only entries matching the LDAP filter " (|(objctclass=groupOfNames)(objectclass=groupOfUniqueNames)) " will be stored in the entry cache. dsconfig set-entry-cache-prop \          --cache-name FIFO \          --add include-filter:\(\|\(objctclass=groupOfNames\)\(objectclass=groupOfUniqueNames\)\)          --port <ADMIN_PORT> \          --bindDN cn=Directory\ Manager \          --bindPassword ****** \          --no-prompt Then enable the entry cache: dsconfig set-entry-cache-prop \          --cache-name FIFO \          --set enabled:true \          --port <ADMIN_PORT> \          --bindDN cn=Directory\ Manager \          --bindPassword ****** \          --no-prompt In addition to that, you can control how much memory the entry cache can use: oud@s96sec1d0-v3:/application/oud : dsconfig -X -n -p <ADMIN PORT> -D "cn=Directory Manager" -w <password> get-entry-cache-prop --cache-name FIFO Property           : Value(s) -------------------:----------------------------------------------------------- cache-level        : 1 enabled            : true exclude-filter     : - include-filter     : (|(objctclass=groupOfNames)(objectclass=groupOfUniqueNames)) max-entries        : 2147483647 max-memory-percent : 90 You can change the max-entries amd max-memory-percent properties to control the entry cache size using the dsconfig set-entry-cache-prop command.

    Read the article

  • help: cannot make ubuntu 64-bit v12.04 install work

    - by honestann
    I decided it was time to update my ubuntu (single boot) computer from 64-bit v10.04 to 64-bit v12.04. Unfortunately, for some reason (or reasons) I just can't make it work. Note that I am attempting a fresh install of 64-bit v12.04 onto a new 3TB hard disk, not an upgrade of the 1TB hard disk that has contained my 64-bit v10.04 installation. To perform the attempted install of v12.04 I unplug the SATA cable from the 1TB drive and plug it into the 3TB drive (to avoid risking damage to my working v10.04 installation). I downloaded the ubuntu 64-bit v12.04 install DVD ISO file (~1.6 GB) from the ubuntu releases webpage and burned it onto a DVD. I have downloaded the DVD ISO file 3 times and burned 3 of these installation DVDs (twice with v10.04 and once with my winxp64 system), but none of them work. I run the "check disk" on the DVDs at the beginning of the installation process to assure the DVD is valid. I also tried to install on two older 250GB seagate drives in the same computer. During every attempt I plug the same SATA cable (sda) into only one disk drive (the 3TB or one of the 250GB drives) and leave the other disk drives unconnected (for simplicity). Installation takes about 30 minutes on the 250GB drives, and about 60 minutes on the 3TB drive - not sure why. When I install on the 250GB drives, the install process finishes, the computer reboots (after the install DVD is removed), but I get a grub error 15. It is my understanding that 64-bit ubuntu (and 64-bit linux in general) has no problem with 3TB disk drives. In the BIOS I have tried having EFI set to "enabled" and "auto" with no apparent difference (no success). I have tried partitioning the drive in a few ways to see if that makes a difference, but so far it has not mattered. Typically I manually create partitions something like this: 8GB swap 8GB /boot ext4 3TB / ext4 But I've also tried the following, just in case it matters: 100MB boot efi 8GB swap 8GB /boot ext4 3TB / ext4 Note: In the partition dialog I specify bootup on the same drive I am partitioning and installing ubuntu v12.04 onto. It is a VERY DANGEROUS FACT that the default for this always comes up with the wrong drive (some other drive, generally the external drive). Unless I'm stupid or misunderstanding something, this is very wrong and very dangerous default behavior. Note: If I connect the SATA cable to the 1TB drive that has been my ubuntu 64-bit v10.04 system drive for the past 2 years, it boots up and runs fine. I guess there must be a log file somewhere, and maybe it gives some hints as to what the problem is. I should be able to boot off the 1TB drive with the 3TB drive connected as a secondary (non-boot) drive and get the log file, assuming there is one and someone tells me the name (and where to find it if the name is very generic). After installation on the 3TB drive completes and the system reboots, the following prints out on a black screen: Loading Operating System ... Boot from CD/DVD : Boot from CD/DVD : error: unknown filesystem grub rescue Note: I have two DVD burners in the system, hence the duplicate line above. The same install and reboot on the 250GB drives generates "grub error 15". Sigh. Any ideas? ========== motherboard == gigabyte 990FXA-UD7 CPU == AMD FX-8150 8-core bulldozer @ 3.6 GHz RAM == 8GB of DDR3 in 2 sticks (matched pair) HDD == seagate 3TB SATA3 @ 7200 rpm (new install 64-bit v12.04) HDD == seagate 1TB SATA3 @ 7200 rpm (current install 64-bit v10.04) GPU == nvidia GTX-285 ??? == no overclocking or other funky business USB == external seagate 2TB HDD for making backups DVD == one bluray burner (SATA) DVD == one DVD burner (SATA) The current ubuntu 64-bit v10.04 system boots and runs fine on a seagate 1TB.

    Read the article

  • Iron Speed Designer 7.0 - the great gets greater!

    - by GGBlogger
    For Immediate Release Iron Speed, Inc. Kelly Fisher +1 (408) 228-3436 [email protected] http://www.ironspeed.com       Iron Speed Version 7.0 Generates SharePoint Applications New! Support for Microsoft SharePoint speeds application generation and deployment   San Jose, CA – June 8, 2010. Software development tools-maker Iron Speed, Inc. released Iron Speed Designer Version 7.0, the latest version of its popular Web 2.0 application generator. Iron Speed Designer generates rich, interactive database and reporting applications for .NET, Microsoft SharePoint and the Cloud.    In addition to .NET applications, Iron Speed Designer V7.0 generates database-driven SharePoint applications. The ability to quickly create database-driven applications for SharePoint eliminates a lot of work, helping IT departments generate productivity-enhancing applications in just a few hours.  Generated applications include integrated SharePoint application security and use SharePoint master pages.    “It’s virtually impossible to build database-driven application in SharePoint by hand. Iron Speed Designer V7.0 not only makes this possible, the tool makes it easy.” – Razi Mohiuddin, President, Iron Speed, Inc.     Integrated SharePoint application security Generated applications include integrated SharePoint application security. SharePoint sites and their groups are used to retrieve security roles. Iron Speed Designer validates the user against a Microsoft SharePoint server on your network by retrieving the logged in user’s credentials from the SharePoint Context.    “The Iron Speed Designer generated application integrates seamlessly with SharePoint security, removing the hassle of designing, testing and approving your own security layer.” -Michael Landi, Solutions Architect, Light Speed Solutions     SharePoint Solution Packages Iron Speed Designer V7.0 creates SharePoint Solution Packages (WSPs) for easy application deployment. Using the Deployment Wizard, a single application WSP is created and can be deployed to your SharePoint server.   “Iron Speed Designer is the first product on the market that allows easy and painless deployment of database-driven .NET web applications inside the SharePoint environment.” -Bryan Patrick, Developer, Pseudo Consulting     SharePoint master pages and themes In V7.0, generated applications use SharePoint master pages and contain the same content as other SharePoint pages. Generated applications use the current SharePoint color scheme and display standard SharePoint navigation controls on each page.   “Iron Speed Designer preserves the look and feel of the SharePoint environment in deployed database applications without additional hand-coding.” -Kirill Dmitriev, Software Developer, Iron Speed, Inc.     Iron Speed Designer Version 7.0 System Requirements Iron Speed Designer Version 7.0 runs on Microsoft Windows 7, Windows Vista, Windows XP, and Windows Server 2003 and 2008. It generates .NET Web applications for Microsoft SQL Server, Oracle, Microsoft Access and MySQL. These applications may be deployed on any machine running the .NET Framework. Iron Speed Designer supports Microsoft SharePoint 2007 and Windows SharePoint Services (WSS3). Find complete information about Iron Speed Designer Version 7.0 at www.ironspeed.com.     About Iron Speed, Inc. Iron Speed is the leader in enterprise-class application generation. Our software development tools generate database and reporting applications in significantly less time and cost than hand-coding. Our flagship product, Iron Speed Designer, is the fastest way to deliver applications for the Microsoft .NET and software-as-a-service cloud computing environments.   With products built on decades of experience in enterprise application development and large-scale e-commerce systems, Iron Speed products eliminate the need for developers to choose between "full featured" and "on schedule."   Founded in 1999, Iron Speed is well funded with a capital base of over $20M and strategic investors that include Arrow Electronics and Avnet, as well as executives from AMD, Excelan, Onsale, and Oracle. The company is based in San Jose, Calif., and is located online at www.ironspeed.com.

    Read the article

  • Weblogic 10.3.4 (PS3) nodemanager wont start?

    - by angelo.santagata
    Hi all, well Im back from Australia and one of the things which happened was Oracle announced the PS3 release of oracles SOA & Webcenter products have been released. Now I normally use pre-installed images but I always like to install the products at least once that way I get to see its installation caveats.. Here’s one. Installation on Windows 7 64bit, 64bit JVM, generic weblogic Server installer. All worked fine, EXCEPT I cant start the node manager, I get the following error <08-Feb-2011 17:16:48> <INFO> <Loading domains file: D:\products\wls1034\WLSERV~1.3\common\NODEMA~1\nodemanager.domains> <08-Feb-2011 17:16:48> <SEVERE> <Fatal error in node manager server> weblogic.nodemanager.common.ConfigException: Native version is enabled but nodemanager native library could not be loaded     at weblogic.nodemanager.server.NMServerConfig.initProcessControl(NMServerConfig.java:249)     at weblogic.nodemanager.server.NMServerConfig.<init>(NMServerConfig.java:190)     at weblogic.nodemanager.server.NMServer.init(NMServer.java:182)     at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:148)     at weblogic.nodemanager.server.NMServer.main(NMServer.java:390)     at weblogic.NodeManager.main(NodeManager.java:31) Caused by: java.lang.UnsatisfiedLinkError: D:\products\wls1034\wlserver_10.3\server\native\win\32\nodemanager.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform     at java.lang.ClassLoader$NativeLibrary.load(Native Method)     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1803)     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1728)     at java.lang.Runtime.loadLibrary0(Runtime.java:823)     at java.lang.System.loadLibrary(System.java:1028)     at weblogic.nodemanager.util.WindowsProcessControl.<init>(WindowsProcessControl.java:17)     at weblogic.nodemanager.util.ProcessControlFactory.getProcessControl(ProcessControlFactory.java:24)     at weblogic.nodemanager.server.NMServerConfig.initProcessControl(NMServerConfig.java:247)     ... 5 more Ok it appears that the node manager has gotten confused and thinks this is a 32bit install of Weblogic Server whereas it is the 64bit install.. Might have been something I did, or didnt do, on installation (e.g. –d64 on the jvm command line), however the workaround is pretty easy. 1. Create a file called nodemanager.properties in %WL_HOME%\common\nodemanager on my machine it was D:\products\wls1034\wlserver_10.3\common\nodemanager 2. Add the following line to it NativeVersionEnabled=false 3. And start it up!, this will force it not to use .DLL files and use emulation/non native methods instead..  

    Read the article

  • Updating FGLRX driver fails & deactivates FGLRX driver

    - by Edwin
    I have an ATI/AMD graphics card in my computer. However, every time I try to install the post-release updates, it always fails and deactivates the graphics driver. I've pasted the last few messages following the ldconfig deferred processing now taking place message from the installation log from /var/log/jockey.log below; if you're interested, I have pasted the full output here. WARNING: /sys/module/fglrx_updates/drivers does not exist, cannot rebind fglrx_updates driver DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking What's going on? Is ldconfig corrupted, or has the driver package just not been properly installed, despite reporting to the "Additional Drivers" panel that it is?

    Read the article

  • Free RAM disappears - Memory leak?

    - by Izzy
    On a fresh started system, free reports about 1.5G used RAM (8G RAM alltogether, Ubuntu 12.04 with lightdm and plasma desktop, one konsole window started). Having the apps running I use, it still consumes not more than 2G. However, having the system running for a couple of days, more and more of my free RAM disappears -- without showing up in the list of used apps: while smem --pie=name reports less than 20% used (and 80% being available), everything else says differently. free -m for example reports on about day 7: total used free shared buffers cached Mem: 7459 7013 446 0 178 997 -/+ buffers/cache: 5836 1623 Swap: 9536 296 9240 (so you can see, it's not the buffers or the cache). Today this finally ended with the system crashing completely: the windows manager being gone, apps "hanging in the air" (frameless) -- and a popup notifying me about "too many open files". Syslog reports: kernel: [856738.020829] VFS: file-max limit 752838 reached So I closed those applications I was able to close, and killed X using Ctrl-Alt-backspace. X tried to come up again after that with failsafeX, but was unable to do so as it could no longer detect its configuration. So I switched to a console using Ctrl-Alt-F2, captured all information I could think of (vmstat, free, smem, proc/meminfo, lsof, ps aux), and finally rebooted. X again came up with failsafeX; this time I told it to "recover from my backed-up configuration", then switched to a console and successfully used startx to bring up the graphical environment. I have no real clue to what is causing this issue -- though it must have to do either with X itself, or with some user processes running on X -- as after killing X, free -m output looked like this: total used free shared buffers cached Mem: 7459 2677 4781 0 62 419 -/+ buffers/cache: 2195 5263 Swap: 9536 59 9477 (~3.5GB being freed) -- to compare with the output after a fresh start: total used free shared buffers cached Mem: 7459 1483 5975 0 63 730 -/+ buffers/cache: 689 6769 Swap: 9536 0 9536 Two more helpful outputs are provided by memstat -u. Shortly before the crash: User Count Swap USS PSS RSS mail 1 0 200 207 616 whoopsie 1 764 740 817 2300 colord 1 3200 836 894 2156 root 62 70404 352996 382260 569920 izzy 80 177508 1465416 1519266 1851840 After having X killed: User Count Swap USS PSS RSS mail 1 0 184 188 356 izzy 1 1400 708 739 1080 whoopsie 1 848 668 826 1772 colord 1 3204 804 888 1728 root 62 54876 131708 149950 267860 And after a restart, back in X: User Count Swap USS PSS RSS mail 1 0 212 217 628 whoopsie 1 0 1536 1880 5096 colord 1 0 3740 4217 7936 root 54 0 148668 180911 345132 izzy 47 0 370928 437562 915056 Edit: Just added two graphs from my monitoring system. Interesting to see: everytime when there's a "jump" in memory consumption, CPU peaks as well. Just found this right now -- and it reminds me of another indicator pointing to X itself: Often when returning to my machine and unlocking the screen, I found something doing heavvy work on my CPU. Checking with top, it always turned out to be /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none. So after this long explanation, finally my questions: What could be the possible causes? How can I better identify involved processes/applications? What steps could be taken to avoid this behaviour -- short from rebooting the machine all X days? I was running 8.04 (Hardy) for about 5 years on my old machine, never having experienced the like (always more than 100 days uptime, before rebooting for e.g. kernel updates). This now is a complete new machine with a fresh install of 8.04. In case it matters, some specs: AMD A4-3400 APU with Radeon(tm) HD Graphics, using the open-source ati/radeon driver (so no fglrx installed), 8GB RAM, WDC WD1002FAEX-0 hdd (1TB), Asus F1A75-V Evo mainboard. Ubuntu 12.04 64-bit with KDE4/Plasma. Apps usually open more or less permanently include Evolution, Firefox, konsole (with Midnight Commander running inside, about 4 tabs), and LibreOffice -- plus occasionally Calibre, Gimp and Moneyplex (banking software I'm already using for almost 20 years now, in a version which did fine on Hardy).

    Read the article

  • Ubuntu 13.04 installation issues: unable to handle kernel paging request error

    - by user173944
    I wish I could say that I’ve done more for the Linux community as of recent but I am very VERY new to all of this and I feel very much in over my head. I figured I would install Ubuntu. on my computer and then I would learn and contribute to the community simultaneously. I will try to be as detailed as I can, please ask questions if you need clarification. I installed Ubuntu. 13.04 (64-bit) on my dell Inspiron 1501. This has an AMD Turion 64-bit TL-56 1.8 Ghz mobile processor. It is a dual core. It has an ATI Radeon Xpress 1150 chipset in it as well. As of right now I only have a total of 2Ghz ram, however I was planning on upgrading that in the near future so I opted for the 64-bit Ubuntu. 13.04. I first tried the live CD and everything seemed to be functioning correctly other than the wireless (but that's not the issue at hand, there are plenty of guides on the internet on how to get that functioning). The internet worked just fine when it was plugged in so no issues there. However, once I went from that to installing 13.04 (just 13.04, no dual partitioning... I want this computer to run strictly Ubuntu.) it did not work. It took me into a shell that I could not type anything into. In this shell it said Bug: unable to handle kernel paging and then it called a bunch of traces and froze up. I had to hard reset the laptop. I tried the boot-repair program multiple times with many different settings and typically after starting up the laptop would say something along the lines of recursive errors. will attempt to fix and then it would attempt to fix a couple of things, and then the computer would freeze up after the text said end trace... so I had to hard reset it again. I'm not an impatient person either, when I say it would freeze up it would be for a period of at least 15 minutes each time before I decided to hard reset. I attempted to install 12.10 on it instead and I got the same exact message, and when I ran boot-repair it did the same exact thing as before. I am currently in the process of running memtest64+ on the computer's memory, though I really don't believe that, nor any of the hardware is at fault due to the fact that it was still running windows vista perfectly when I had decided to switch over to Ubuntu. so far the memtest has came back just fine without any errors, but I’ve only been running it for approximately an hour. So this is the situation I’m in. I did notice when I was using the live disk that the video driver needed updated so I performed that, though I’m fairly certain that has nothing to do with this. I have also attempted (though I’m not certain that my attempt was successful in accomplishing what I had planned) to manually edit the grub settings by making acpi=0 along top of adding nomodeset to the boot commands. Like I said, I’m not sure I did that correctly though, but I’m fairly certain I did. If anyone needs any more information I will be more than happy to provide it, I will post back once I get the full results of the memtest. I very much appreciate any ideas anyone else has, I’ve been at this for a few days to no avail... thank you

    Read the article

  • Slow Ubuntu 10.04 after long time unused

    - by Winston Ewert
    I'm at spring break so I'm back at my parent's house. I've turned my computer on which has been off since January and its unusably slow. This was not the case when I last used the computer in January. It is running 10.04, Memory: 875.5 MB CPU: AMD Athlon 64 X2 Dual Core Processor 4400+ Available Disk Space: 330.8 GB I'm not seeing a large usage of either memory or Disk I/O. If I look at my list of processes there is only a very small amount of CPU usage. However, if I hover over the CPU usage graph that I've on the top bar, I sometimes get really high readings like 100%. It took a long time to boot, to open firefox, to open a link in firefox. As far as I can tell everything that the computer tries to do is just massively slow. Right now, I'm apt-get dist-upgrading to install any updates that I will have missed since last time this computer was on. Any ideas as to what is going on here? UPDATE: I thought to check dmesg and it has a lot of entries like this: [ 1870.142201] ata3.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 [ 1870.142206] ata3.00: irq_stat 0x40000008 [ 1870.142210] ata3.00: failed command: READ FPDMA QUEUED [ 1870.142217] ata3.00: cmd 60/08:10:c0:4a:65/00:00:03:00:00/40 tag 2 ncq 4096 in [ 1870.142218] res 41/40:00:c5:4a:65/00:00:03:00:00/40 Emask 0x409 (media error) <F> [ 1870.142221] ata3.00: status: { DRDY ERR } [ 1870.142223] ata3.00: error: { UNC } [ 1870.143981] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1870.146758] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1870.146761] ata3.00: configured for UDMA/133 [ 1870.146777] ata3: EH complete [ 1872.092269] ata3.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 [ 1872.092274] ata3.00: irq_stat 0x40000008 [ 1872.092278] ata3.00: failed command: READ FPDMA QUEUED [ 1872.092285] ata3.00: cmd 60/08:00:c0:4a:65/00:00:03:00:00/40 tag 0 ncq 4096 in [ 1872.092287] res 41/40:00:c5:4a:65/00:00:03:00:00/40 Emask 0x409 (media error) <F> [ 1872.092289] ata3.00: status: { DRDY ERR } [ 1872.092292] ata3.00: error: { UNC } [ 1872.094050] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1872.096795] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1872.096798] ata3.00: configured for UDMA/133 [ 1872.096814] ata3: EH complete [ 1874.042279] ata3.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 [ 1874.042285] ata3.00: irq_stat 0x40000008 [ 1874.042289] ata3.00: failed command: READ FPDMA QUEUED [ 1874.042296] ata3.00: cmd 60/08:10:c0:4a:65/00:00:03:00:00/40 tag 2 ncq 4096 in [ 1874.042297] res 41/40:00:c5:4a:65/00:00:03:00:00/40 Emask 0x409 (media error) <F> [ 1874.042300] ata3.00: status: { DRDY ERR } [ 1874.042302] ata3.00: error: { UNC } [ 1874.044048] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1874.046837] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1874.046840] ata3.00: configured for UDMA/133 [ 1874.046861] sd 2:0:0:0: [sda] Unhandled sense code [ 1874.046863] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1874.046867] sd 2:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 1874.046872] Descriptor sense data with sense descriptors (in hex): [ 1874.046874] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1874.046883] 03 65 4a c5 [ 1874.046886] sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1874.046892] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 65 4a c0 00 00 08 00 [ 1874.046900] end_request: I/O error, dev sda, sector 56969925 [ 1874.046920] ata3: EH complete I'm not certain, but that looks like my problem may be a failing hard drive. But the drive is less then a year old, it really shouldn't be failing now...

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58  | Next Page >