Search Results

Search found 3087 results on 124 pages for 'chi ping lee'.

Page 53/124 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• Can i change the subnet on the vpn side of a server without having to change its whole lan (to avoid collission)

  - by Gusty

  Ohai, ive got a xp server with a client connecting via VPN. Problem (as we all know) is that sometimes the subnets clash. Instead of changing the whole server network every time this happens, cant i just have the server appear to have a different subnet to vpn clients? I have no interest in accessing other computers than the server on its LAN. I tried just turning off automatic dhcp in the servers vpn settings and changed it to 172.31.255.x. The client gets the address assigned alright and it can ping 172.31.255.1 but i cannot ping the server name (because the dns on the clients vpn connection points at 192.168.0.1?) wisdom? PS everything worked until the client hit a network with the same subnet as the server lan. thanks

  Read the article

• [CentOS 4.8] nslookup resolves domains to IPs, but I can't get a response to pings to external servers

  - by Beco

  I have a fresh install of CentOS 4.8 running on an internal development server. I haven't done anything to it besides setting up sudoers and SSH. I can SSH into the server and from there resolve domains to IPs and ping internal servers, but for some reason I don't get any response from pinging external servers. The software firewall is disabled, and the problem is present with both static and DHCP-assigned network configurations. The network domain controller is a Windows Server 2003 box. $ nslookup google.com Server: 10.254.2.5 Address: 10.254.2.5#53 Non-authoritative answer: Name: google.com Address: 74.125.47.147 Name: google.com Address: 74.125.47.99 <etc...> 10.254.2.5 is the Win2K3 server. $ ping google.com PING google.com (74.125.47.106) 56(84) bytes of data. It just hangs here indefinitely. $ cat /etc/resolv.conf ; generated by /sbin/dhclient-script search <...snip...>.local nameserver 10.254.2.5 nameserver 10.254.2.124 10.254.2.124 is the backup DC server, which is currently off and tombstoned by this point. The snipped section is our company name. # ifconfig eth0 Link encap:Ethernet HWaddr <snip> inet addr:10.254.2.101 Bcast:10.254.2.255 Mask:255.255.255.0 inet6 addr: <snip>/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:80066 errors:0 dropped:0 overruns:0 frame:0 TX packets:4421 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7810133 (7.4 MiB) TX bytes:590550 (576.7 KiB) Interrupt:225 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8104 (7.9 KiB) TX bytes:8104 (7.9 KiB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.254.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.254.2.5 0.0.0.0 UG 0 0 0 eth0 And, for good measure, a snapshot of the current ethernet config via the system-config-network GUI. Edit: I don't yet have enough rep to post images, so here's a link. Sorry! system-config-network snapshot I'm pretty green when it comes to setting up *nix dev servers and network configuration in general, so please let me know if I've left out critical information, or posted information I shouldn't have posted. Thanks!

  Read the article

• How do I get a static IP address for my teapot?

  - by Joe

  I maintain this teapot: It returns a 418 error when it is pinged, and it is pinged regularly by people arriving from the relevant Wikipedia page. (For those interested, and there appear to be a few of you, the relevent story is here) It sits on a shelf in my office in the Computer Science department of a university and the support guys were kind enough to give it a dedicated IP address some years ago. My contract is coming to an end in the next few weeks and it's occurred to me that I'm going to have to do something with the teapot. I'd like to take it home but I have no clue how to explain to my home broadband supplier that I want a dedicated IP address coming to my house so that people can ping a teapot. Is there a reasonable way of having a server on a shelf in my house that people can ping via an IP address? What search terms can I use to find a solution to this problem?

  Read the article

• unable to connect site to different port

  - by JohnMerlino

  I have a domain was registered at godaddy named http://mysite.com/. I logged into godaddy and I went to All Products Domains Domain Management. I clicked on the appropriate domain and it took me to the Domain Details page. I clicked Launch under DNS Manager and it took me to the Zone File Editor. I noticed that notify.mysite.com was pointing to an IP address pointing to a dead server, so I switched it to an operating server. Then I pinged the domain to see where it was pointing to and it was correctly pointing to the working server. So I copied the default configuration under sites-available: sudo cp default notify.mysite.com. And then I made some edits to it to have it point to a different document root to serve files at a different port: Listen 1740 Listen 64.135.xx.xxx:1740 #I also tried this as well: NameVirtualHost 64.135.xx.xxx:1740 <VirtualHost 64.135.xx.xxx:1740> ServerAdmin [email protected] ServerName notify.mysite.com DocumentRoot /var/www/test/public <Directory /var/www/test/public> Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Then I enabled the virtual host. Then I went to the document root and added an index.html file with some text in it. Then I restarted apache. The restart gave no errors. Then I type the correct domain in URL: http://notify.mysite.com:1740/ and I get: Oops! Google Chrome could not connect to notify.mysite.com:1740 Somehow it took out all my other sites. Now even the ones that were responding on port 80 are no longe responding, even though I did not touch the virtual hosts for them. I get this message now: Oops! Google Chrome could not connect to mysite.com However, ping responds: ping mysite.com PING mysite.com (64.135.12.134): 56 data bytes 64 bytes from 64.135.12.134: icmp_seq=0 ttl=49 time=20.839 ms 64 bytes from 64.135.12.134: icmp_seq=1 ttl=49 time=20.489 ms The result of telnet: $ telnet guarddoggps.com 80 Trying 64.135.12.134... telnet: connect to address 64.135.12.134: Connection refused telnet: Unable to connect to remote host

  Read the article

• Server 2008 DHCP some clients not getting IP

  - by AdminAlive

  Today (after turning on the server from an extended power outage) some clients are not able to get IP addresses. Some clients work just fine. Win 7 and XP doesnt seem to matter. I have tried flushing dns, renew, disabling APIPA and even assigned a static IP. Even with the static IP it acts as if it isn't on a network. You can't ping anything. I have also tried resetting the TCPIP stack. The clients that work can ping the DNS and DHCP servers fine. Any suggestions? Thanks

  Read the article

• Combine WLAN with LAN

  - by fiatux

  I have D-link DSL 2750U wireless router. My PC and notebook are connected to router by Wi-Fi. They can share files or ping each other. I have a network storage unit plugged into router by an ethernet cable. Any of the computers cannot reach that storage unit or ping it. I guess my router isolates LAN network from WLAN network. Is there a way to combine them and get the router treat all devices connected to router in a single network? Thanks.

  Read the article

• Is it possible to alias a hostname in linux?

  - by user10178

  I am looking for the right answer to the above question. It has been asked by jmillikin at ubuntu forums as follows: Is it possible to create a hostname alias? Sort of like /etc/hosts, but with other hostnames rather than IP addresses. So that with some file like this, you could ping "fakehost1", and it would be re-mapped to "realhost", and then "realhost" would be resolved to an IP address. # Real host # Aliases realhost fakehost1 fakehost2 fakehost3 Somebody has answered about ssh. But not about ping, etc. My main purpose is to use it as an alias for svn server. In my case, realhost is under dynamic ip. So, "/etc/hosts" alias doesn't work. I want to access my svn server as svn://my_svnserver/my_repos instead of svn://realhost/my_repos. Thanks in advance for any advice.

  Read the article

• How does communication between 2 computers in a single network happen?

  - by learner

  Lets say I and my friend connect our computers with a LAN cable. I ping my friend with his IP address. How does it work? Since we are in the same network, we don't even need IP addresses, do we? Isn't IP addressing only relevant in case of inter-network communication? What will the ping command do with his IP address? How will it eventually find his physical address (NIC address)? (no ARP here, because that would involve a router at the edge of the network, which doesn't apply here). Am I wrong somewhere?

  Read the article

• machine ignoring host file?

  - by squinny

  so i can ping the ip adress for the server i need but when i ping it by name, the server name is followed by an incorrect ip address. My host file is updated, i can communicate with my machine from my server just fine. i can access websites on the server by typing the ip adress into the adress bar followed by the name. it is like my machine is ignoring my hosts file... i have updated re updated...flushed dns, u name it ive done it any ideas?

  Read the article

• VLAN help on ESX 4/vSphere

  - by user49032

  I setup a new VLAN with ID 153 in vSphere for my ESX4 server. The VLAN is setup for virtual machines and then I added a new NIC to the VM I want to be able to access the VM. The NIC is added to VLAN 153, but yet I am unable to ping the VLAN .1 IP that is setup on our Cisco 3750. The IP is properly setup on the Cisco 3750 because I'm able to ping the interface IP from other machines on the network. I'm guessing there must be an issue with the cabling. Any ideas?

  Read the article

• WCF and Firewalls

  - by Amitd

  Hi guys, As a part of learning WCF, I was trying to use a simple WCF client-server code . http://weblogs.asp.net/ralfw/archive/2007/04/14/a-truely-simple-example-to-get-started-with-wcf.aspx but I'm facing strange issues.I was trying out the following. Client(My) IP address is : 192.168.2.5 (internal behind firewall) Server IP address is : 192.168.50.30 port : 9050 (internal behind firewall) Servers LIVE/External IP (on internet ) : 121.225.xx.xx (accessible from internet) When I specify the above I.P address of server(192.168.50.30), the client connects successfully and can call servers methods. Now suppose if I want to give my friend (outside network/on internet) the client with server's live I.P, i get an ENDPOINTNOTFOUND exceptions. Surprisingly if I run the above client specifying LIVE IP(121.225.xx.xx) of server i also get the same exception. I tried to debug the problem but haven't found anything. Is it a problem with the company firewall not forwarding my request? or is it a problem with the server or client . Is something needed to be added to the server/client to overcome the same problem? Or are there any settings on the firewall that need to be changed like port forwarding? (our network admin has configured the port to be accessible from the internet.) is it a authentication issue? Code is available at . http://www.ralfw.de/weblog/wcfsimple.txt http://weblogs.asp.net/ralfw/archive/2007/04/14/a-truely-simple-example-to-get-started-with-wcf.aspx i have just separated the client and server part in separate assemblies.rest is same. using System; using System.Collections.Generic; using System.Text; using System.ServiceModel; namespace WCFSimple.Contract { [ServiceContract] public interface IService { [OperationContract] string Ping(string name); } } namespace WCFSimple.Server { [ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall)] class ServiceImplementation : WCFSimple.Contract.IService { #region IService Members public string Ping(string name) { Console.WriteLine("SERVER - Processing Ping('{0}')", name); return "Hello, " + name; } #endregion } public class Program { private static System.Threading.AutoResetEvent stopFlag = new System.Threading.AutoResetEvent(false); public static void Main() { ServiceHost svh = new ServiceHost(typeof(ServiceImplementation)); svh.AddServiceEndpoint( typeof(WCFSimple.Contract.IService), new NetTcpBinding(), "net.tcp://localhost:8000"); svh.Open(); Console.WriteLine("SERVER - Running..."); stopFlag.WaitOne(); Console.WriteLine("SERVER - Shutting down..."); svh.Close(); Console.WriteLine("SERVER - Shut down!"); } public static void Stop() { stopFlag.Set(); } } } namespace WCFSimple { class Program { static void Main(string[] args) { Console.WriteLine("WCF Simple Demo"); // start server System.Threading.Thread thServer = new System.Threading.Thread(WCFSimple.Server.Program.Main); thServer.IsBackground = true; thServer.Start(); System.Threading.Thread.Sleep(1000); // wait for server to start up // run client ChannelFactory<WCFSimple.Contract.IService> scf; scf = new ChannelFactory<WCFSimple.Contract.IService>( new NetTcpBinding(), "net.tcp://localhost:8000"); WCFSimple.Contract.IService s; s = scf.CreateChannel(); while (true) { Console.Write("CLIENT - Name: "); string name = Console.ReadLine(); if (name == "") break; string response = s.Ping(name); Console.WriteLine("CLIENT - Response from service: " + response); } (s as ICommunicationObject).Close(); // shutdown server WCFSimple.Server.Program.Stop(); thServer.Join(); } } } Any help?

  Read the article

• Ubuntu 11.10 - Everytime i am trying to connect to my box using SSH, its failing not connecting

  - by YumYumYum

  From any other PC doing SSH to my Ubuntu 11.10,is failing. Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 -- apt-get install openipml openhpi-plugin-ipml

  Read the article

• links for 2011-02-28

  - by Bob Rhubart

  Apache Tuscany : SCA Java 2.x Releases (tags: ping.fm) Richard Veryard on Architecture: Modernism and Enterprise Architecture "Underlying conventional enterprise architecture theory and practice are some implicit assumptions that could be loosely characterized as modernist. Several people are offering more or less radical departures from conventional enterprise architecture..." - Richard Veryard (tags: ping.fm entarch) Java / Oracle SOA blog: Building an asynchronous web service with OSB "A few weeks ago I made a blogpost over how you can build an asynchronous web service with JAX-WS. In this blogpost I will do the same in the Oracle Service Bus." - Oracle ACE Edwin Biemond (tags: oracle otn oracleace servicebus esb osb webservices soa) Enterprise Software Development with Java: GlassFish 3.1 arrived! Yes sir, we do cluster now! "GlassFish 3.1 is finally there. As promised by Oracle back in March last year! And it is an exciting release. It brings back all the clustering and high availability support we were missing since 2.x into the Java EE 6 world." - Oracle ACE Director Markus Eisele (tags: oracle otn oracleace glassfish)

  Read the article

• links for 2010-06-17

  - by Bob Rhubart

  Live Webcast: Alcatel-Lucent Delivers Modern Customer User Experience with New Interactive Portal Saeed Hosseiniyar (CIO of Alcatel-Lucent’s Enterprise Products Group) and Andy MacMillan  (VP of Product Management for Oracle’s Enterprise 2.0 Solutions) discuss how  Alcatel used Oracle’s Enterprise 2.0 solutions to build a community and  give customers a rich interactive experience. (tags: oracle otn webcast enterprise2.0) Up Next, More Browser Tools for WebCenter Sharing | The AppsLab On the heels of our bookmarklet for sharing to WebCenter, today we were designing another other way to help people interact with WebCenter from the browser (tags: ping.fm oracle e20) BPM 11gR1 now available on Amazon EC2 "This is a fully configured image which requires absolutely no installation and lets you get hands on experience with the software within minutes," says  Prasen Palvankar. "This image has all the required software installed and configured." (tags: oracle otn bpm amazon ec2) Webcast: Introducing Next-Generation Business Process Management Hasan Rizvi, Senior Vice President, Oracle Product Development, discusses innovations in Oracle's new BPM Suite 11g in this webcast. (tags: oracle otn webcast bpm) Tim Pinchetti: Architecture as a navigation system "Metaphors have value in communicating different aspects of architecture. So I’d like to explore different perspectives on architecture using different metaphors, starting with: navigation!" -- Tim Pinchetti  (tags: architecture enterprisearchitecture entarch) Oracle Fusion Middleware Innovation Awards 2010 Nominate your organization today for a chance to be recognized for your cutting-edge solution using Oracle Fusion Middleware products. (tags: oracle openworld fusionmiddleware innovation) Oracle OpenWorld Key Financials Sessions Theresa Hickman with highlights on the some of the 70 financial sessions scheduled for Oracle Open World,  crossing all the financials product lines: e-Business Suite, JD Edwards, PeopleSoft, and Fusion. (tags: oracle otn openworld financials) Liberate Your Laptops! The Return of Virtual Developer Day Details on the upcoming Oracle Technology Network Virtual Developer Day - Tuxedo. (English-language version scheduled for July 27th.)  (tags: oracle tuxedo virtualbox otn) Webcast: Effective Smart Data Grid Management David Haak (Accenture), Brad Williams (Oracle), and Chris Foretich (Southern) discuss the strategy behind and the application of smart data grid technology in this on-demand webcast.  (tags: ping.fm oracle bpm)

  Read the article

• Everytime i am trying to connect to my box using SSH, its failing not connecting

  - by YumYumYum

  From any other PC doing SSH to my Ubuntu 11.10,is failing. My network setup: Telenet ISP (Belgium) Fiber cable < RJ45 cable straight to Ubuntu PC Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ nmap 192.168.0.128 Starting Nmap 5.50 ( http://nmap.org ) at 2012-06-08 19:11 CEST Nmap scan report for 192.168.0.128 Host is up (0.00045s latency). All 1000 scanned ports on 192.168.0.128 are closed (842) or filtered (158) Nmap done: 1 IP address (1 host up) scanned in 6.86 seconds ubuntu@ubuntu:~$ netstat -aunt | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 1 192.168.0.128:58616 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:56749 199.7.57.72:80 ESTABLISHED tcp 0 1 192.168.0.128:58614 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:49916 173.194.65.113:443 ESTABLISHED tcp 0 1 192.168.0.128:45699 64.34.119.101:80 SYN_SENT tcp 0 0 192.168.0.128:48404 64.34.119.12:80 ESTABLISHED tcp 0 0 192.168.0.128:54161 67.201.31.70:80 TIME_WAIT $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 $ apt-get install openipml openhpi-plugin-ipml $ openipmish > help redisp_cmd on|off > redisp_cmd on redisp set Final follow up: Step 1: BUG for network card driver r8169 Step 2: get the latest build version http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=4&PFid=4&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true#RTL8110SC(L) Step 3: build / make $ cd /var/tmp/driver $ tar xvfj r8169.tar.bz2 $ make clean modules && make install $ rmmod r8169 $ depmod $ cp src/r8169.ko /lib/modules/3.xxxx/kernel/drivers/net/r8169.ko $ modprobe r8169 $ update-initramfs -u $ init 6 Voila!!

  Read the article

• Host is unreacheble with static networking configuration via /etc/network/interfaces while GUI NetworkManager is ok

  - by Riccardo

  I have some trouble setting-up the network interface using the static IP configuration. I run ubuntu 12.04 kernel 3.11.0-22 with the back-ports enabled. I followed these instructions from help.ubuntu.com but there seems to exist some conflict between the GUI approach (NetworkManager) and the command line approach. $ sudo nano /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.1.1.50 gateway 10.1.1.10 netmask 255.255.255.0 dns-nameservers 192.168.3.45 192.168.8.10 $ sudo /etc/init.d/networking restart I than try to ping for example google.com ping -c 3 www.google.com the response is that the host is unreachable. The icon on the top right of the desktop says: wired network disconnected. If I work using the GUI approach (Edit Connections and so on...) all works great. Can same one explain to me where I wrong? $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 90:e6:ba:07:4a:77 inet addr:10.1.1.50 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::92e6:baff:fe07:4a77/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39619 errors:0 dropped:0 overruns:0 frame:0 TX packets:18520 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19030895 (19.0 MB) TX bytes:2768769 (2.7 MB) $ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0

  Read the article

• links for 2011-03-07

  - by Bob Rhubart

  DON CIO News: DON CIO Discusses Future IT Initiatives Audio links and a little background information on a recent town hall meetings hosted by Department of the Navy Chief Information Officer Terry Halvorsen. (tags: usgov usnavy cio enterprisearchitecture) Strassmann's Blog: Why So Many Data Centers? "The idea of datacenter consolidation involves much more that applying simple technical solutions." - Paul Strassmann (tags: enterprisearchitecture datacenter consolidation) Satyajith Nair: Coherence - The next big thing for the cloud!! "Disk-based computing is fraught with performance and management issues and doing away with Disks though not practical now, maybe true in the future. This also calls for a re-think of our current application architecture which is so focussed on disk-based persistence." - Satyajith Nair (tags: oracle infosys coherence grid cloud) TechCast: GlassFish Server and WebLogic - Interoperability and Integration - Oracle media - developer Fusion VP Development Anil Gaur and Product Manager Adam Leftik explain Oracle&#39;s strategy for creating increasing integration between GlassFish Server and Oracle WebLogic Server with an overview of new features and functionality for developers in GlassFish 3.1. (tags: ping.fm) Oracle Fusion and Oracle Fusion Applications : Overview | OracleApps Epicenter So WHAT IS ORACLE FUSION? People often get confuse with this term .To start with, it will be a good idea to know the difference between Fusion (tags: ping.fm) Marc Kelderman: OSB: Automatic update of Service Acounts Solution architect Marc Kelderman shares a work-around for using different Service Accounts for multiple environments. (tags: oracle otn sca bpel soa bpm servicebus) Perfect Integration 1 - Architectural Approach "First post in a series of 5-10, I will release all my views and opinions on the Art of Integration. I challenge you to disagree, and bash me with arguments and reasoning." -- Martijn Linssen (tags: enterprisearchitecture integration) Edwin Biemond: Set the Initial Focus on a component in a Page or a Fragment Edwin says: "This is not so hard to do, but sometimes it can be tricky to find the id of a component when you use regions ( Bounded Task Flows )." (tags: oracle otn oracleace java soa) Oracle Linux and Oracle Virtualization at Collaborate 2011 Information on more than 200 Oracle-hosted sessions with the latest insights and guidance from Oracle executives, product managers, and developers. (tags: oracle virtualization linux ioug oaug)

  Read the article

• Running 12.04 as a gateway - resolvconf, dhclient and dnsmasq integration

  - by Adam

  I have a gateway server which is set up originally with Ubuntu desktop 12.04 - perhaps a mistake, I don't know, something to bear in mind. I ripped out network-manager and now want to get resolvconf, dhclient and dnsmasq to play well together. dhclient gets the gateway's eth0 WAN ip address and the ISP DNS name server from the modem. dnsmasq needs to serve dhcp to the rest of the lan on eth1 and acts as a DNS cache both for the lan and for the gateway machine. I also set up iptables as a firewall. Right now, the gateway's /etc/resolv.conf shows only name server = 127.0.0.1 which is correct AFAIK. However I don't think that dhclient is giving dnsmasq the ISP DNS name server nor is dnsmasq picking up the OpenDNS and Google name servers I specified in /etc/network/interfaces - at the moment look-ups, i.e. ping or surfing, don't work unless I manually edit /etc/resolv.conf to put in an upstream name server like 8.8.8.8 So I removed the resolvconf package. Now I'm not getting dhcp on my lan and I'm not able to do DNS look-ups on the host itself - I can surf and ping on the net, but not 127.0.0.1. Where do I go from here? This setup with the config for dhclient and dnsmasq, and the same resolv.conf and hosts files worked on my old debian box.

  Read the article

• DNS hijack - prevention tips

  - by user578359

  Hi there, Over the weekend it looks like the DNS was hijacked on two of my domains. My set up is I have the sites registered on 1and1.co.uk, with dns nameservers pointing to Hostgator in the US where the sites are hosted. I also had cloudflare CDN running on the sites (via hostgator cpanel). My question is any ideas as to how this happened, and how I could either monitor it so I know if it occurs again, or strengthen the set up/service to minimise the risk. History: I received a ping from my site monitoring service that the sites were down. When I checked the sites were up so I assumed it was local to the monitoring service I received a ping last night the sites were up When I checked, one site was redirecting to download-manual.com (and checking that URL now, the home page is not the same as the one I saw, so they too may have been hijacked/hacked) The other site URL remained the same but had one of those standard site search pages which bounce you off to either phishing or paid for search sites I notified Hostgator who told me Cloudflare or 1and1 were the issue. I removed cloudflare, and contacted both them and hostgator, and am awaiting a response, but am not holding my breath. Is this common? I've never heard of this or come across this before. It's pretty scary that this can happen so easily. Appreciate any input. **Update: I've now spoken to support at 1and1, Hostgator, and Cloudflare, and each one claims it has nothing to do with them, and must be one of the others. Larry, curly, moe.

  Read the article

• Help with IPTables - Masquerading + Forwarding, 1-to-1?

  - by Artiom Chilaru

  I've got a clean Ubuntu Server 10.10 with OpenSSH, OpenVPN and vsFTPd installed. The server is running as a VM on the Hyper-V server (hypervisor), has two network interfaces mapped to physical adapters (eth0 and eth1), and a virtual interface with a direct connection to the hypervisor (eth2). The VPN will create a tun0 interface when a client connects. What I want is the remote user, connecting over VPN to be able to connect to the hypervisor (all ports, ping etc). The initial idea was to make the VPN create a tap0 interface, and bridge eth2 to tap0, but this didn't work, unfortunately, as it seems that the adapters don't want to go into promiscuous mode (partially confirmed by MS) At the same time, both the hypervisor and the remove client over VPN can successfully ping/connect to the ubuntu server with no problems. So my plan right now is to try doing some 1-1 masquerading, if possible. Basically, I want every request sent from the VPN client to the ubuntu server to be redurected to the hypervisor instead (with IP translation ofc), and every request from the hypervisor to the ubuntu machine sent to the VPN client (IP translated too). Only 1 client will be connected at a time to the VPN, so I can force limit it to a single IP at all times, if necessary. Is this the right way to go, and if true, how can this be achieved? It's almost like a special case of port-forwarding, except every single port on tun0 is forwarded to a machine in eth2, and every port on the eth2 side forwards to an ip on tun0 I guess it could be done with iptables, but I'm rather new in linux, so I can't do it myself... help? :(

  Read the article

• links for 2011-02-02

  - by Bob Rhubart

  Oracle WebLogic's YouTube Channel Tired of reading? Watch and learn.  (tags: oracle weblogic youtube) Chris Muir: JDev: ADF BC and ADF Libraries: The Library Private property Oracle ACE Director Chris Muir illustrates the use of ADF Libraries. (tags: oracle otn oracleace) Satyajith Nair: Starting a SOA Project? Don't forget the Service Registry!! Satyajith Nair argues that "even with small projects, adding a Service Registry in the architecture has significant benefits with regards to Developer Productivity, Build Quality, Ease of maintenance and Architecture Flexibility." (tags: oracle infosys soa serviceregistry soagovernance) Matthias Wessendorf: Weblog Apache MyFaces in the cloud - Part II Matthias Wessendorf says: "A few days ago I did a quick test to see how well Apache MyFaces works in the cloud. The Amazon Beanstalk test was a success." (tags: oracle apache cloud) SOA & E2.0 Partner Community Forum - registration is open! (SOA Partner Community Blog) Jurgen Kress with an update on next month's event in the Netherlands. (tags: oracle otn soa enterprise2.0) Well Hello There, WebCenter PS3 VM | The AppsLab Jake Kuramoto says: "You may recall my struggle last year to assemble and document a WebCenter VM. Well, apparently other people thought it was a good idea..." (tags: oracle otn enterprise2.0 webcenter) InfoQ: Proving the Business Value of SOA Anne Thomas Manes discusses SOA goals and objectives used to measure a system’s success, measuring the business value, SOA project metrics, and recommendations on proving the business value of SOA. (tags: ping.fm) InfoQ: Amazon Will Offer Oracle Database 11g on RDS Amazon will offer Oracle Database 11g on RDS which brings patching, backup, replication, and failover support to Oracle’s database. (tags: ping.fm)

  Read the article

• links for 2011-02-17

  - by Bob Rhubart

  ArchitectACEs - Oracle Wiki Putting a Face on the Architect ACE The Oracle ACE s listed here have identified themselves, or have been identified by fellow ACEs, as software architects. As... (tags: ping.fm) Debra's thoughts on Oracle and User Groups: I did it - I did the Fusion UX Demo Oracle ACE Director Debra Lilley shares her experience in presenting a Fusion Applications demo at RMOUG. (tags: oracle otn oracleace) The Blas from Pas: JRuby Script to Monitor a Oracle WebLogic GridLink Data Source Remotely "In WebLogic 10.3.4 release, a single data source implementation has been introduced to support Oracle RAC cluster. To simplify and consolidate its support for Oracle RAC, WebLogic Server has provided a single data source that is enhanced to support the capabilities of Oracle RAC." (tags: oracle otn weblogic) Show Notes: Bob Hensle on IT Strategies from Oracle (ArchBeat) In Part 1 Bob Hensle talked about the various documents in the IT Strategies from Oracle library. In Part 2 (now available) Bob talks about how SOA and other factors are reflected in those documents. (tags: oracle otn entarch podcast) PODCAST: Examining the state of EA and findings of recent survey | Open Group Blog A transcript of a podcast panel discussion on the findings from a study on the current state and future direction of enterprise architecture from The Open Group Conference, San Diego 2011. (tags: entarch opengroup) A Virtual Dilemma (Antony Reynolds' Blog) SOA author Anthony Reynolds shares a solution. (tags: oracle otn soa) Webcast: Live Online Forum: Oracle Security - February 24, 9:00am PT Speakers: Mary Ann Davidson, Chief Security Officer, Oracle; Tom Kyte, Senior Technical Architect, Oracle; Jeff Margolies, Partner, Security Practice, Accenture; Vipin Samar, VP, Database Security Product Development Oracle; and Nishant Kaushik, Chief Strategist, Identity and Access Management. (tags: oracle security) Obama banks on cloud, consolidation, to hold down IT costs | Computerworld NZ President Obama's fiscal 2012 budget proposal keeps IT spending almost flat compared to fiscal 2010 mostly due to the consolidation of data centers and a shift to cloud computing systems. (tags: ping.fm)

  Read the article

• links for 2011-02-25

  - by Bob Rhubart

  The (non) Importance of Language (Enterprise Architecture at Oracle) (tags: ping.fm entarch) ArchBeat (tags: ping.fm) Andrejus Baranovskis's Blog: Beware of Hackers - Keep ADF Task Flows inside WEB-INF Oracle ACE Director Andrejus Baranovskis with a word of caution. (tags: oracle oracleace otn adf) Introduction to WebCenter Personalization: The Conductor; (WebCenter Personalization) Steve Pepper offers an introduction to the Conductor component in Oracle WebCenter Personalization. (tags: oracle otn webcenter enterprise2.0) Batch Aggregation of files in BPEL process instances based on correlation AMIS Technology blog Oracle ACE Director Lucas Jellema shares his solution to a colleague's challenge. (tags: oracle otn oracleace soa bpel) Bradley D. Brown: Watch Out Larry...Here they Come! "Every Fortune 500 company that I've talked to in the last few months is trying to figure out their mobile strategy. Organizations are getting the push from the top down - i.e. executives are asking for data from their mobile devices." - Oracle ACE Director Brad Brown (tags: oracle otn ipad mobilecomputing entarch oracleace) Oracle Technology Network Developer Day - You are the future of Java. Boston, March 3. Designed for the enterprise professional, this event will teach you about the latest developments in the Java Virtual Machine, Java EE, Java SE, Java on the Desktop, and Embedded Java. Whether you're a developer or architect, or managing a team of them, this is an event you can't miss. (tags: oracle otn java)

  Read the article

• Troubleshooting Your Network with Oracle Linux

  - by rickramsey

  Are you afraid of network problems? I was. Whenever somebody said "it's probably the network," I went to lunch. And hoped that it was fixed by the time I got back. Turns out it wasn't that hard to do a little basic troubleshooting Tech Article: Troubleshooting Your Network with Oracle Linux by Robert Chase You're no doubt already familiar with ping. Even I knew how to use ping. Turns out there's another command that can show you not just whether a system can respond over the network, but the path the packets to that system take. Our blogging platform won't allow me to write the name down, but I can tell you that if you replace the x in this word with an e, you'll have the right command: tracxroute Once you get used to those, you can venture into the realms of mtr, nmap, and netcap. Robert Chase explains how each one can help you troubleshoot the network, and provides examples for how to use them. Robert is not only a solid writer, he is also a brilliant motorcyclist and rides an MV Augusta F4 750. About the Photograph Photo of flowers in San Simeon, California, taken by Rick Ramsey on a ride home from the Sun Reunion in May 2014. - Rick Follow me on: Personal Blog | Personal Twitter   Follow OTN Garage on: Web | Facebook | Twitter | YouTube

  Read the article

• cannot access ubuntu 12.04 SAMBA share from windows 7 using hostname

  - by user98398

  I've been trying for days to get this working, and everywhere I look online it seems no one has a definitive answer, so here is the run down: I have an external drive attached to my ubuntu 12.04 machine, "nicholas-desktop." I have the entire drive shared over the network via SAMBA. If I try to access the drive from windows 7 by using "\nicholas-desktop" it fails saying it cannot locate "nicholas-desktop." However, if I use the current IP address assigned to my machine by my router's DHCP server by typing "\192.168.2.XXX" I have no problems accessing the share. if I try to ping my ubuntu machine's hostname from windows it fails. The same happens if I try to ping my windows machine, "nicholas-laptop" from my ubuntu machine. Again, if I use either machine's assigned IP address it works fine. Can someone please help me get this working? I don't want any workarounds like setting a static IP, or DHCP reservation, I want to be able to resolve hostnames from both sides. I have tried enabling SAMBA'a WINS server so I could resolve the hostnames using netBIOS, however that didn't work either, I may have made a mistake setting it up though. Thanks for your time, NCB

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >