Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 53/788 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

  • How to Buy an SD Card: Speed Classes, Sizes, and Capacities Explained

    - by Chris Hoffman
    Memory cards are used in digital cameras, music players, smartphones, tablets, and even laptops. But not all SD cards are created equal — there are different speed classes, physical sizes, and capacities to consider. Different devices require different types of SD cards. Here are the differences you’ll need to keep in mind when picking out the right SD card for your device. Speed Class In a nutshell, not all SD cards offer the same speeds. This matters for some tasks more than it matters for others. For example, if you’re a professional photographer taking photos in rapid succession on a DSLR camera saving them in high-resolution RAW format, you’ll want a fast SD card so your camera can save them as fast as possible. A fast SD card is also important if you want to record high-resolution video and save it directly to the SD card. If you’re just taking a few photos on a typical consumer camera or you’re just using an SD card to store some media files on your smartphone, the speed isn’t as important. Manufacturers use “speed classes” to measure an SD card’s speed. The SD Association that defines the SD card standard doesn’t actually define the exact speeds associated with these classes, but they do provide guidelines. There are four different speed classes — 10, 8, 4, and 2. 10 is the fastest, while 2 is the slowest. Class 2 is suitable for standard definition video recording, while classes 4 and 6 are suitable for high-definition video recording. Class 10 is suitable for “full HD video recording” and “HD still consecutive recording.” There are also two Ultra High Speed (UHS) speed classes, but they’re more expensive and are designed for professional use. UHS cards are designed for devices that support UHS. Here are the associated logos, in order from slowest to fastest:       You’ll probably be okay with a class 4 or 6 card for typical use in a digital camera, smartphone, or tablet. Class 10 cards are ideal if you’re shooting high-resolution videos or RAW photos. Class 2 cards are a bit on the slow side these days, so you may want to avoid them for all but the cheapest digital cameras. Even a cheap smartphone can record HD video, after all. An SD card’s speed class is identified on the SD card itself. You’ll also see the speed class on the online store listing or on the card’s packaging when purchasing it. For example, in the below photo, the middle SD card is speed class 4, while the two other cards are speed class 6. If you see no speed class symbol, you have a class 0 SD card. These cards were designed and produced before the speed class rating system was introduced. They may be slower than even a class 2 card. Physical Size Different devices use different sizes of SD cards. You’ll find standard-size CD cards, miniSD cards, and microSD cards. Standard SD cards are the largest, although they’re still very small. They measure 32x24x2.1 mm and weigh just two grams. Most consumer digital cameras for sale today still use standard SD cards. They have the standard “cut corner”  design. miniSD cards are smaller than standard SD cards, measuring 21.5x20x1.4 mm and weighing about 0.8 grams. This is the least common size today. miniSD cards were designed to be especially small for mobile phones, but we now have a smaller size. microSD cards are the smallest size of SD card, measuring 15x11x1 mm and weighing just 0.25 grams. These cards are used in most cell phones and smartphones that support SD cards. They’re also used in many other devices, such as tablets. SD cards will only fit into marching slots. You can’t plug a microSD card into a standard SD card slot — it won’t fit. However, you can purchase an adapter that allows you to plug a smaller SD card into a larger SD card’s form and fit it into the appropriate slot. Capacity Like USB flash drives, hard drives, solid-state drives, and other storage media, different SD cards can have different amounts of storage. But the differences between SD card capacities don’t stop there. Standard SDSC (SD) cards are 1 MB to 2 GB in size, or perhaps 4 GB in size — although 4 GB is non-standard. The SDHC standard was created later, and allows cards 2 GB to 32 GB in size. SDXC is a more recent standard that allows cards 32 GB to 2 TB in size. You’ll need a device that supports SDHC or SDXC cards to use them. At this point, the vast majority of devices should support SDHC. In fact, the SD cards you have are probably SDHC cards. SDXC is newer and less common. When buying an SD card, you’ll need to buy the right speed class, size, and capacity for your needs. Be sure to check what your device supports and consider what speed and capacity you’ll actually need. Image Credit: Ryosuke SEKIDO on Flickr, Clive Darra on Flickr, Steven Depolo on Flickr

    Read the article

  • Anything Mouse Like Isn't Seen by Ubuntu 13.10

    - by belkinsa
    I have a upgraded 13.10 from 13.04 and today this issue of anything that is mouse-like is not seen by Ubuntu. The only input device that works is my Wacom Tablet and it's pen. I already checked for updates and have the latest updates for the Ubuntu system. Here is the lsusb output: Bus 002 Device 002: ID 04f2:b209 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 056a:00b8 Wacom Co., Ltd Intuos4 4x6 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub This is issue a bug or how to fix it? I can't even use the Live USB of Ubuntu 13.10 to fix the issue. EDIT 1: Seems that Ubuntu isn't seeing the clicks done by a mouse if it's the Wacom tablet. EDIT 2: I think it's a bug but I need help to report it.

    Read the article

  • Prepping the Raspberry Pi for Java Excellence (part 1)

    - by HecklerMark
    I've only recently been able to begin working seriously with my first Raspberry Pi, received months ago but hastily shelved in preparation for JavaOne. The Raspberry Pi and other diminutive computing platforms offer a glimpse of the potential of what is often referred to as the embedded space, the "Internet of Things" (IoT), or Machine to Machine (M2M) computing. I have a few different configurations I want to use for multiple Raspberry Pis, but for each of them, I'll need to perform the following common steps to prepare them for their various tasks: Load an OS onto an SD card Get the Pi connected to the network Load a JDK I've been very happy to see good friend and JFXtras teammate Gerrit Grunwald document how to do these things on his blog (link to article here - check it out!), but I ran into some issues configuring wi-fi that caused me some needless grief. Not knowing if any of the pitfalls were caused by my slightly-older version of the Pi and not being able to find anything specific online to help me get past it, I kept chipping away at it until I broke through. The purpose of this post is to (hopefully) help someone else recognize the same issues if/when they encounter them and work past them quickly. There is a great resource page here that covers several ways to get the OS on an SD card, but here is what I did (on a Mac): Plug SD card into reader on/in Mac Format it (FAT32) Unmount it (diskutil unmountDisk diskn, where n is the disk number representing the SD card) Transfer the disk image for Debian to the SD card (dd if=2012-08-08-wheezy-armel.img of=/dev/diskn bs=1m) Eject the card from the Mac (diskutil eject diskn) There are other ways, but this is fairly quick and painless, especially after you do it several times. Yes, I had to do that dance repeatedly (minus formatting) due to the wi-fi issues, as it kept killing the ability of the Pi to boot. You should be able to dramatically reduce the number of OS loads you do, though, if you do a few things with regard to your wi-fi. Firstly, I strongly recommend you purchase the Edimax EW-7811Un wi-fi adapter. This adapter/chipset has been proven with the Raspberry Pi, it's tiny, and it's cheap. Avoid unnecessary aggravation and buy this one! Secondly, visit this page for a script and instructions regarding how to configure your new wi-fi adapter with your Pi. Here is the rub, though: there is a missing step. At least for my combination of Pi version, OS version, and uncanny gift of timing and luck there was. :-) Here is the sequence of steps I used to make the magic happen: Plug your newly-minted SD card (with OS) into your Pi and connect a network cable (for internet connectivity) Boot your Pi. On the first boot, do the following things: Opt to have it use all space on the SD card (will require a reboot eventually) Disable overscan Set your timezone Enable the ssh server Update raspi-config Reboot your Pi. This will reconfigure the SD to use all space (see above). After you log in (UID: pi, password: raspberry), upgrade your OS. This was the missing step for me that put a merciful end to the repeated SD card re-imaging and made the wi-fi configuration trivial. To do so, just type sudo apt-get upgrade and give it several minutes to complete. Pour yourself a cup of coffee and congratulate yourself on the time you've just saved.  ;-) With the OS upgrade finished, now you can follow Mr. Engman's directions (to the letter, please see link above), download his script, and let it work its magic. One aside: I plugged the little power-sipping Edimax directly into the Pi and it worked perfectly. No powered hub needed, at least in my configuration. To recap, that OS upgrade (at least at this point, with this combination of OS/drivers/Pi version) is absolutely essential for a smooth experience. Miss that step, and you're in for hours of "fun". Save yourself! I'll pick up next time with more of the Java side of the RasPi configuration, but as they say, you have to cross the moat to get into the castle. Hopefully, this will help you do just that. Until next time! All the best, Mark 

    Read the article

  • After upgrading to 12.04 the scanner from Brother Printer MFC-290C does not work

    - by Lorenzo
    I upgraded Ubuntu to 12.04 from 11.10. The printer works, but the scanner doesn't now. In 11.10 I had to install a special driver from Brother. The printer's model is Brother MFC-290C. The computer is a Toshiba Satellite. How can I get the scanner working? Update: I have a 64-bit installation on the Toshiba Satellite. Thank you for your instructions, Chad--24216. I followed each step: 1 through 5. I also updated the Brother Linux scanner S-KEY tool. The output of dpkg -l | grep Brother is: ii brscan-skey 0.2.3-0 Brother Linux scanner S-KEY tool ii brscan3 0.2.11-5 Brother Scanner Driver ii mfc290ccupswrapper:i386 1.1.2-2 Brother CUPS Inkjet Printer Definitions ii mfc290clpr:i386 1.1.2-2 Brother lpr Inkjet Printer Definitions ii printer-driver-ptouch 1.3-3ubuntu0.1 printer driver Brother P-touch label printers Still the scanner does not work. Here is the message from Xsane: Failed to open device brother3:bus6;dev1: Invalid argument. Here is the message from Simple Scan: Failed to scan. Unable to connect to scanner. And Scan Utility still doesn't display the scanner line.

    Read the article

  • Will there be a difference between Unity "Desktop" and Unity "Netbook" interface?

    - by bash
    What has me slightly confused from all the different reports about Unity becoming the default shell in the 11.04 desktop edition: Some claim and this is how most people seem to see it, that what currently is the UNE interface will be taken 1:1 (including any changes made during the Natty cycle) and used as the interface for the desktop version - meaning that the interface will be exactly the same for 11.04 UNE and UDE. Some other reports talk more along the lines a "desktop unity", making it sound, that while both will be using Unity, the Desktop edition will get it's own Unity, tailored specifically towards the Desktop formfactor. So both editions will be using Unity, but with slight differences in the layout or interface. So my question is, will there be any difference between 11.04 Unity "Desktop" and Unity "Netbook" interface?

    Read the article

  • What are the pros (and cons) of using “Sign in with Twitter/Facebook” for a new website?

    - by Paul D. Waite
    Myself and a friend are looking to launch a little forum site. I’m considering using the “Sign in with Facebook/Twitter” APIs, possibly exclusively (a la e.g. Lanyrd), for user login. I haven’t used either of these before, nor run a site with user logins at all. What are the pros (and cons) of these APIs? Specifically: What benefits do I get as a developer from using them? What drawbacks are there? Do end users actually like/dislike them? Have you experienced any technical/logistical issues with these APIs specifically? Here are the pros and cons I’ve got so far: Pros More convenient for the user (“register” with two clicks, sign in with one) Possibly no need to maintain our own login system  Cons No control over our login process Exclude Facebook/Twitter users who are worried about us having some sort of access to their accounts Users’ accounts on our site are compromised if their Facebook/Twitter accounts are compromised. And if we don’t maintain our own alternative login system: Dependency on Facebook/Twitter for our login system Exclude non-Facebook/non-Twitter users from our site

    Read the article

  • How to use the Netduino Go Piezo Buzzer Module

    - by Chris Hammond
    Originally posted on ChrisHammond.com Over the next couple of days people should be receiving their Netduino Go Piezo Buzzer Modules , at least if they have ordered them from Amazon. I was lucky enough to get mine very quickly from Amazon and put together a sample project the other night. This is by no means a complex project, and most of it is code from the public domain for projects based on the original Netduino. Project Overview So what does the project do? Essentially it plays 3 “tunes” that...(read more)

    Read the article

  • Prototype Fanless Heatsink Is Silent and Dust-Immune

    - by Jason Fitzpatrick
    What does this chip cooler do that your’s doesn’t? Run 30 times more efficiently, nearly silently, and repel any dust that settles on it, for starters. Check out the video to see it in action. Although the video is a bit dry the heatsink in action is pretty impressive–nearly silent? repels dust? radically more efficient? Our only complaint is we can’t slap one on a test machine right this minute. [via Extreme Tech] How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

    Read the article

  • Disk failing on dell mini, are there diagnostic tools?

    - by John Lawrence Aspden
    Hi, my dell mini 10v running Ubuntu 10.10 runs ok for hours, but then will suddenly slow down drastically. Switching to a console shows lots of error messages, which also get into /var/log/syslog. These errors happen every couple of seconds. I'm figuring that the disk is failing, but is there anyway to be sure, and can laptop disks be replaced easily? Mar 20 11:08:12 dell-mini kernel: [ 2476.378774] ata1.00: status: { DRDY ERR } Mar 20 11:08:12 dell-mini kernel: [ 2476.378785] ata1.00: error: { UNC } Mar 20 11:08:12 dell-mini kernel: [ 2476.449841] ata1.00: configured for UDMA/133 Mar 20 11:08:12 dell-mini kernel: [ 2476.449887] ata1: EH complete Mar 20 11:08:14 dell-mini kernel: [ 2478.777754] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Mar 20 11:08:14 dell-mini kernel: [ 2478.777976] ata1.00: BMDMA stat 0x24 Mar 20 11:08:14 dell-mini kernel: [ 2478.778059] ata1.00: failed command: READ DMA Mar 20 11:08:14 dell-mini kernel: [ 2478.778162] ata1.00: cmd c8/00:08:43:3b:97/00:00:00:00:00/e0 tag 0 dma 4096 in Mar 20 11:08:14 dell-mini kernel: [ 2478.778166] res 51/40:00:47:3b:97/00:00:00:00:00/00 Emask 0x9 (media error)

    Read the article

  • Important : Services Oracle Standard Installation (OSI) - Services de mise à niveau matérielle

    - by swalker
    Cette communication a pour objet de vous informer de mises à jour importantes concernant les Services Oracle Advanced Customer Support (ACS) Oracle Standard Installation (OSI). Oracle a le plaisir de vous annoncer l'introduction de nouvelles références OSI pour la commande de services d'installation packagés pour la mise à niveau de systèmes en place, notamment : des nouvelles mises à niveau de CPU (unités centrales), mémoires, cartes réseau, appliances de stockage et librairies de sauvegarde. Il est possible de commander des services d'installation OSI pour des mises à niveau matérielles comme suit : sur le point de vente matériel (POS) - via la procédure hors ligne pour les partenaires Matériels Oracle PartnerNetwork (OPN) avec des commandes indépendantes après la vente (APOS) - via la procédure OSI hors ligne du bureau de commandes des Services ACS. Ces procédures, ainsi que les fichiers de mappage des références OSI à jour, sont disponibles sur le site Oracle Partner Store (OPS). Les références OSI pour les mises à niveau matérielles pourront être commandées sur OPS fin 2011. Si vous avez des questions concernant cette mise à jour, veuillez contacter l'équipe Global Support Partner Operations à l'adresse [email protected].

    Read the article

  • Erfolgreicher Start für Solution Center von Azlan

    - by A&C Redaktion
    Von links nach rechts: Rainer Hunkler, Hunkler GmbH & Co. KG / Birgit Nehring, Director Software & Solutions TDAzlan Am 11. Juni war es so weit: Der Distributor Tech Data Azlan eröffnete feierlich das zertifizierte Oracle Solutions Center (wir berichteten). Zugegen waren auch diverse Oracle Partner. Sie sind es, an die sich das neue Angebot vorrangig richtet: Das beeindruckend ausgestattete Oracle Authorized Solutions Center (OASC) steht Partnern künftig zur Verfügung, um vor allem Engineered Systems, aber auch Klassiker wie den Sparc-Server zu testen und ihren Kunden live vorzuführen. Unterstützt werden Interessierte dabei durch den Azlan-Consultant Ingo Frobenius und sein Team ausgewiesener Oracle Spezialisten. Es ist sogar möglich, die Systeme auszuleihen, wenn der Test in einer besonderen Umgebung erfolgen soll. Gemeinsam mit Birgit Nehring, Director Software und Solutions bei Azlan, feierten hochrangige Oracle Vertreter wie Christian Werner diesen Meilenstein für Oracle und Azlan. Einen ausführlichen Bericht von der Eröffnung mit Hintergründen zur Neuausrichtung im Channel-Business und der Oracle Strategie bezüglich Engineered Systems lesen Sie in der aktuellen Ausgabe der IT-Business unter der Überschrift „Azlan nimmt Demo-Center für Oracle Produkte in Betrieb“.

    Read the article

  • Can a Printer Print White?

    - by Jason Fitzpatrick
    The vast majority of the time we all print on white media: white paper, white cardstock, and other neutral white surfaces. But what about printing white? Can modern printers print white and if not, why not? Read on as we explore color theory, printer design choices, and why white is the foundation of the printing process. Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. Image by Coiote O.; available as wallpaper here. The Question SuperUser reader Curious_Kid is well, curious, about printers. He writes: I was reading about different color models, when this question hit my mind. Can the CMYK color model generate white color? Printers use CMYK color mode. What will happen if I try to print a white colored image (rabbit) on a black paper with my printer? Will I get any image on the paper? Does the CMYK color model have room for white? The Answer SuperUser contributor Darth Android offers some insight into the CMYK process: You will not get anything on the paper with a basic CMYK inkjet or laser printer. The CMYK color mixing is subtractive, meaning that it requires the base that is being colored to have all colors (i.e., White) So that it can create color variation through subtraction: White - Cyan - Yellow = Green White - Yellow - Magenta = Red White - Cyan - Magenta = Blue White is represented as 0 cyan, 0 yellow, 0 magenta, and 0 black – effectively, 0 ink for a printer that simply has those four cartridges. This works great when you have white media, as “printing no ink” simply leaves the white exposed, but as you can imagine, this doesn’t work for non-white media. If you don’t have a base color to subtract from (i.e., Black), then it doesn’t matter what you subtract from it, you still have the color Black. [But], as others are pointing out, there are special printers which can operate in the CMYW color space, or otherwise have a white ink or toner. These can be used to print light colors on top of dark or otherwise non-white media. You might also find my answer to a different question about color spaces helpful or informative. Given that the majority of printer media in the world is white and printing pure white on non-white colors is a specialty process, it’s no surprise that home and (most) commercial printers alike have no provision for it. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

    Read the article

  • Graphics card recommendation for dual-HD output?

    - by Graham
    I'm going for a dual-HD monitor setup (HDMI or DVI output), running Ubuntu 11.10 64-bit with Unity 3D. What graphics card / video card should I get? Requirements: Dual-monitor output for DVI (mixed-resolution: 1920x1080 and 1920x1200) Or dual-HDMI output, if it works with Ubuntu Smooth desktop compositing and (Chrome) browser and IDE window rendering At least 60fps on fullscreen glxgears (1920x1200 resolution) Supported and non-buggy behaviour in Unity 3D/Compiz Not looking to play games Smooth fullscreen video playback (just because)

    Read the article

  • Modified Strategy Design Pattern

    - by Samuel Walker
    I've started looking into Design Patterns recently, and one thing I'm coding would suit the Strategy pattern perfectly, except for one small difference. Essentially, some (but not all) of my algorithms, need an extra parameter or two passed to them. So I'll either need to pass them an extra parameter when I invoke their calculate method or store them as variables inside the ConcreteAlgorithm class, and be able to update them before I call the algorithm. Is there a design pattern for this need / How could I implement this while sticking to the Strategy Pattern? I've considered passing the client object to all the algorithms, and storing the variables in there, then using that only when the particular algorithm needs it. However, I think this is both unwieldy, and defeats the point of the strategy pattern. Just to be clear I'm implementing in Java, and so don't have the luxury of optional parameters (which would solve this nicely).

    Read the article

  • Data validation best practices: how can I better construct user feedback?

    - by Cory Larson
    Data validation, whether it be domain object, form, or any other type of input validation, could theoretically be part of any development effort, no matter its size or complexity. I sometimes find myself writing informational or error messages that might seem harsh or demanding to unsuspecting users, and frankly I feel like there must be a better way to describe the validation problem to the user. I know that this topic is subjective and argumentative. StackOverflow might not be the proper channel for diving into this subject, but like I've mentioned, we all run into this at some point or another. There are so many StackExchange sites now; if there is a better one, feel free to share! Basically, I'm looking for good resources on data validation and user feedback that results from it at a theoretical level. Topics and questions I'm interested in are: Content Should I be describing what the user did correctly or incorrectly, or simply what was expected? How much detail can the user read before they get annoyed? (e.g. Is "Username cannot exceed 20 characters." enough, or should it be described more fully, such as "The username cannot be empty, and must be at least 6 characters but cannot exceed 30 characters."?) Grammar How do I decide between phrases like "must not," "may not," or "cannot"? Delivery This can depend on the project, but how should the information be delivered to the user? Should it be obtrusive (e.g. JavaScript alerts) or friendly? Should they be displayed prominently? Immediately (i.e. without confirmation steps, etc.)? Logging Do you bother logging validation errors? Internationalization Some cultures prefer or better understand directness over subtlety and vice-versa (e.g. "Don't do that!" vs. "Please check what you've done."). How do I cater to the majority of users? I may edit this list as I think more about the topic, but I'm genuinely interest in proper user feedback techniques. I'm looking for things like research results, poll results, etc. I've developed and refined my own techniques over the years that users seem to be okay with, but I work in an environment where the users prefer to adapt to what you give them over speaking up about things they don't like. I'm interested in hearing your experiences in addition to any resources to which you may be able to point me.

    Read the article

  • Intel Xeon E5 (Sandy Bridge-EP) and SQL Server 2012 Benchmarks

    - by jchang
    Intel officially announced the Xeon E5 2600 series processor based on Sandy Bridge-EP variant with upto 8 cores and 20MB LLC per socket. Only one TPC benchmark accompanied product launch, summary below. Processors Cores per Frequency Memory SQL Vendor TPC-E 2 x Xeon E5-2690 8 2.9GHz 512GB (16x32GB) 2012 IBM 1,863.23 2 x Xeon E7-2870 10 2.4GHz 512GB (32x16GB) 2008R2 IBM 1,560.70 2 x Xeon X5690 6 3.46GHz 192GB (12x16GB) 2008R2 HP 1,284.14 Note: the HP report lists SQL Server 2008 R2 Enterprise Edition...(read more)

    Read the article

  • PCI-e SEALEVEL dual serial card not recognized on Ubuntu 14.04

    - by kwhunter
    New to Ubuntu, running 14.04. I have trouble with the serial port setup, I have a plug-in PCI-e SEALEVEL dual serial card that is not recognized. user1@WSIWORKSTATION2:~$ dmesg | grep tty [ 0.000000] console [tty0] enabled [ 1.577197] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.943326] tty ttyprintk: hash matches [ 17.240880] ttyS4: LSR safety check engaged! [ 17.241589] ttyS4: LSR safety check engaged! [ 17.242354] ttyS5: LSR safety check engaged! [ 17.243058] ttyS5: LSR safety check engaged! [ 17.243918] ttyS6: LSR safety check engaged! [ 17.244485] ttyS6: LSR safety check engaged! [ 17.245195] ttyS7: LSR safety check engaged! [ 17.245830] ttyS7: LSR safety check engaged! [ 17.246554] ttyS8: LSR safety check engaged! [ 17.247191] ttyS8: LSR safety check engaged! user1@WSIWORKSTATION2:~/Desktop/seacom$ lspci -d 135e: -vvv 02:04.0 Bridge: Sealevel Systems Inc Device e205 (rev aa) Subsystem: Sealevel Systems Inc Device e205 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- SERR- Capabilities: However, the manufacturer's drivers won't install: 1. user1@WSIWORKSTATION2:~/Desktop/seacom$ make install ---------------------------------------------------------------- Installing seacom suite. ---------------------------------------------------------------- --Installing utilities-- /usr/bin/ld: skipping incompatible ../../lib/libftd2xx.a when searching for -lftd2xx /usr/bin/ld: cannot find -lftd2xx collect2: error: ld returned 1 exit status make[2]: *** [setusb] Error 1 make[1]: *** [install] Error 1 make: *** [install] Error 1 2. user1@WSIWORKSTATION2:~/Desktop/seaio$ make install ---------------------------------------------------------------- Installing SD suite. ---------------------------------------------------------------- *Compiling SeaIO Library source file: digitalIoDevice.cpp gcc: error trying to exec 'cc1plus': execvp: No such file or directory make[1]: *** [digitalIoDevice.o] Error 1 make: *** [install] Error 1 I was not able to find a solution, so if anyone can help it will be much appreciated. PS Have some troubles with formatting my post, apologies...

    Read the article

  • Increase Performance of VS 2010 by using a SSD

    - by System.Data
    After searching on the internet for performance improvements when using Visual Studio 2010 with a solid state hard drive, I heard a lot of different opinions. A lot of people said that there isn't really a benefit when using a SSD, but in contrast others said the exact opposite. I am a bit confused with the contrasting opinions and I cannot really make a decision whether buying a SSD would make a difference. What are your experiences with this issue and which SSD did you use?

    Read the article

  • NCurses, scrolling of multiline items, "current item" pointer and "selected items"

    - by mjf
    I am looking for hints/ideas for the best (most effective) way on how to scroll multi-line items as well as emphasizing of the "current item" and "selected items" such as: 1 FOO ITEM 1 Foo sub-item 2 Foo sub-item 3 Foo sub-item 2 BAR ITEM 1 Bar sub-item 3 BAZ ITEM 1 Baz sub-item 2 Baz sub-item 4 RAB ITEM 5 ZZZ ITEM 1 Zzz sub-item 2 Zzz sub-item 3 Zzz sub-item 4 Zzz sub-item using NCurses (some combination of windows, sub-windows, pads, copywin? Uff! In fact, the lines could exceed the stdscr's width so that possibility to scroll left/right would be also nice - pads?)... The whole items (including the sub-items) are supposed to be emphasized as full-width window/pad areas. The "current item" (including it's set of lines) should be emphasized (i.e. using A_BOLD), selected set of items of choice (including the set of lines for each the selected item) should be emphasized in another way (i.e. using A_REVERSE). What would you choose to cope with it the most effective NCurses way? (The less redrawals/refreshes the better and terminal is supposed to have the ability to change it's size - such as XTerm running under "floating window" management.) Thank you for your ideas (or perhaps some piece of code where something similar is already solved - I was not able to find anything helpful on the Internet. I mean I am not going to copy/paste foreign code but programming NCurses properly is still somehow difficult to me). P.S.: Would you suggest to "smooth-scroll" +1/-1 screen line or rather "jump-scroll" +lines/-lines of the items? (I personally prefer the latter one.) Sincerely, -- mjf

    Read the article

  • Happy Birthday, SPARC!

    - by A&C Redaktion
    25 Jahre gibt es SPARC in diesem Herbst – da gratulieren Oracle A&C und alle Partner natürlich ganz herzlich! Wir blicken zurück auf ein Vierteljahrhundert Erfolgsgeschichte:Wir befinden uns im Jahr 1987 und klobige graue PCs halten seit einigen Jahren Einzug in Büros und Privathäuser. Ein innovatives Startup-Unternehmen namens Sun Microsystems präsentiert seinen neuen Computer Sun-4, die eigentliche Sensation jedoch ist der Mikroprozessor, den die jungen Leute extra dafür entwickelt hatten: SPARC. Es handelte sich um einen extrem leistungsfähigen RISC-Hauptprozessor, der sowohl in den eigenen Workstations als auch den Servern der Sun-4-Baureihe zum Einsatz kommt. Vor allem in der Unternehmens-IT ermöglicht SPARC in den Folgejahren einen enormen Sprung nach vorn.Die weitere Entwicklung von SPARC, kombiniert mit einem Überblick über andere Meilensteine in der Geschichte der Computerwelt, finden Sie auf der Webseite "Celebrate 25 Years of SPARC Innovation".Wir springen gleich weiter in die Gegenwart, denn auch seit Sun zu Oracle gehört, hat sich so manches getan: Gerade erst hat Oracle die neue Server-Linie Sparc T4 vorgestellt – in Fachkreisen spricht man bereits von der größten Leistungssteigerung in der Geschichte der SPARC-Prozessoren.In den USA wurde das Jubiläum bereits kräftig gefeiert: Hier finden Sie Bilder vom Geburtstagsfest im Museum für Computer-Geschichte in Mountain View, Kalifornien, bei dem auch die SPARC-Entwickler Bill Joy and Andreas von Bechtolsheim zugegen waren und auch im Video SPARC-Event Highlights dreht sich alles um das Jubiläum. In der Oracle Familie gibt es 2012 noch ein weiteres Geburtstagskind: Solaris wird 20, herzlichen Glückwunsch! Das Unix-Betriebssystem, basierend auf SunOS, kam im Jahr 1992 erstmals auf den Markt. Solaris konnte seine gute Stellung seither behaupten und hat nun mit Solaris 11.1 das erste Cloud-Betriebssystem vorgestellt. Dieses überträgt die Zuverlässigkeit, Sicherheit und Skalierbarkeit des bewährten Solaris in die Cloud und bietet eine optimale Plattform für Unternehmensanwendungen.  Lesen Sie hier, was die Fachpresse über die Geburtstagskinder schreibt: ProLinux.de (SPARC) Computerwoche.de (Solaris)SearchDataCenter.de (Solaris)

    Read the article

  • Adding a forum to an existing site

    - by Andrew Heath
    I've got a site with ~500 registered members, 300 of which are what you'd call "active". Site data is kept in a MySQL dbase. I'd like to add a myBB forum to the site, but this question applies to any forum really. What I very much want to avoid is requiring my users to register both on the site and on the forum because my userbase is not technically literate and this would confuse a lot of them. However the forum software has its own registration, login, cookie, and password management system which naturally are different from the site's mechanics. I envision the following possibilities: install myBB into the existing database and customize the login code to unify the two systems. This would probably mean changing the site's code to use the myBB system as that would likely be less painful to refactor and wouldn't hurt future myBB upgrade ability. install myBB into separate database and write a bridging script of some sort that auto-registers existing site users with the forum if they elect to participate. Also check new forum registrations against the site's username list to prevent newcomers from taking existing names. run them fully separate and force users to re-register (easiest for ME, but least desirable for them) I would like a suggested course of action from those who have trod this path before... Thank you.

    Read the article

  • Random memory corruption going undetected by memtest86

    - by sds
    Thinkpad t520; Ubuntu 12.04.1 LTS; 3.2.0-33-generic 16GB of ram Memtest86+ ran for 26 hours, 9 passes, no errors Booted into "recovery mode"; Ran fsck all filesystems - no errors; "check all packages" - no errors apparent random memory corruption: perl/R/chrome segfault every now and then, seemingly at random; sort(1) produces corrupt unsorted files. What could be possibly wrong and how do I debug it?

    Read the article

  • What's the better user experience: Waiting once at startup for a long time or waiting frequently for a short time?

    - by Roflcoptr
    I'm currently design an application that involves a lot of calculation. Now I have generally two possibilities which I have both tested: 1) During startup of the application I calculated only the most important values and these values that consume a lot of time. So the user has to wait approximately 15 seconds during startup. But on the other hand a lot of user interactions require recalculation so that the user often has to wait 2-3 seconds after clicking somewhere until the application has calculated and loaded all values 2) I load everything during startup. This takes from 90 to 120 seconds... This is quite a long time, but the big advantage is that all the user interactions are executed immediately. So what would you generally consider the better approach? Loading all time-consuming operations during startup or when needed?

    Read the article

  • What is the technical reason that so many social media sites don't allow you to edit your text?

    - by Edward Tanguay
    A common complaint I hear about Facebook, Twitter, Ning and other social sites is that once a comment or post is made, it can't be edited. I think this goes against one of the key goals of user experience: giving the user agency, or the ability to control what he does in the software. Even on Stackexchange sites, you can only edit the comments for a certain amount of time. Is the inability for so many web apps to not allow users to edit their writing a technical shortcoming or a "feature by design"?

    Read the article

  • Site Review: Facebook.com and Blockbuster.com - Navigation Schemes

    After cycling through a list of my favorite sites I decided to select Facebook.com and Blockbuster.com for this  post because I found their navigation schemes very intuitive. Facebook in my opinion took a very simplistic and minimalistic approach when they designed their site and its navigation. For example, when you login to your account you will find on the upper left hand side a generic section of the site common areas to all users like news, messages, events, photos and friends. Below this in a separate navigation menu is a list of applications that a user has elected to access through bookmarks. Finally in the upper right hand corner of the site contains links to administer the user’s account like account settings, public profile, and a link back to the users’ home page. Blockbuster on the other had tried to make site navigation a little more slick by using a menu-submenu approach to navigation where user can click on things like Rent, Buy, On Demand, Games, Stores, and Gifts and a submenu of corresponding items appears below the original menu item. In addition they also took this approach and added categorized lists of movies that they offer on the homepage so that users can click on an item like “DVD Spotlight” and a list of movies represented as actual DVD box cases appear on the user’s screen so they can scroll through the list by using left and right arrows on either side of the images displayed. Both Facebook and Blockbuster have more than one navigation groupings because their respected sites are so large and offer an absorbent amount of features. Because of this reason they have to group the main functionality of information in to logical groups based on their actions they perform and the access to specific information. For example it would not make sense for Facebook to include a particular game you like to play within your account with a section pertaining to account administration. The game link would be completely out of place and really confuse the users experience because the groupings where not logically grouped. In addition I think that Facebook users would benefit if Facebook allowed its users to specify what they want on the general navigation from within their site or at least create a section to show frequently accessed pages or favorite sections. Finally regarding additional navigation, I think blockbuster users really benefit from the submenu system of categorizing data, and if fact Blockbuster even allows them to refine the information they are looking for through the use of secondary submenu systems allowing users to really drill down in to what they are looking for to learn more on. I do not think that having more than one navigation bar on a web page is not confusing for the user. For example if you have a navigation bar at the top of your page and at the bottom will allow users to move around the website easier because they can utilize the navigation closest to where their cursor is on the page. In regards to designers forcing all the navigation in to one navigation bar, I think it would be hard for the user to fully understand what is going on based on the size and complexity of the site they are dealing with. For example Blockbuster has a ton of content that could not easily be put in to one navigation bar. From my experience with both Facebook and Blockbuster, they both do a good job with cross browser compatibility. I have had no issues with either site in IE, Firefox, Chrome, and Safari over the years. In addition, I do not believe that either Facebook or Blockbuster require any additional plug-in to utilize their navigation bars.

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >