Search Results

Search found 4637 results on 186 pages for 'john allsup'.

Page 53/186 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

  • Windows 8 freezes after every other reboot on Lenovo W520 after about 10 seconds

    - by John Nevermore
    I have a Lenovo W520 laptop with i7-2760QM, intel 520 SSD and Nvidia Quadro 1000m. When i boot the PC with discrete graphics SET in BIOS, the computer totally freezes and the only thing left to do is reboot. This only happens with NVidia drivers for Windows 8 x64 installed (I've tried about 4 different drivers on Nvidia's site). When i boot the PC with integrated graphics set in BIOS, there is a momentary "hickup" after about 10 seconds (instead of freezing) and then everything is working fine. When i boot the PC with discrete graphics ON and no Nvidia drivers installed, the same thing happens as described above with integrated graphics. I've tried doing 1) bcdedit /set disabledynamictick yes 2) Disabling VT-x in BIOS (Seriously would prefer not to disable it, since i use VM-s almost every day) but no dice. The only thing that worked was to enable the Hyper-v feature. I was then able to boot properly with discrete graphics and Nvidia drivers installed, but since i use VMWare for VM development this was no solution (VMWare complained about not being able to launch because of Hyper-v being installed). I followed the instructions in this tutorial, to be able to run VMWare. Then the computer just booted into a black screen past Windows logo. How to boot Windows 8 x64 without freezing with Quadro 1000M enabled, Nvidia Drivers installed and Hyper-v feature preferably disabled ?

    Read the article

  • Cooling for a small server room

    - by John Zwinck
    I have a server room about 12 feet square with an unfinished ceiling (exposed ducts and wiring). It houses a few servers (about ten, 1U and 2U) and some networking gear (four 1U switches, three routers, three modems, two cable boxes). With the door closed, it runs around 80 degrees Fahrenheit with half the servers turned on. When I turned on all the servers it reached 86 before I chickened out and propped the door open. The room is adjacent to air-conditioned office space, but does not itself have dedicated air conditioning. The ventilation for this room seems to be limited to one duct coming in at ceiling level, with a powered fan to draw air in, and one duct at ceiling level to allow air to flow out (it seems like it may just go into the drop ceiling cavity in the adjacent room). The adjacent office space stays fairly cool, but I'd prefer not to leave the door propped open all the time. There is both 110v and 208v service in the room, and plenty of power available. But there are no windows, and no floor drains (in a pinch we might be able to run a condensation hose through a small hole we'd drill in the wall to a nearby sink area, but only if absolutely necessary). I've considered portable A/C units, but I'm not sure on sizing and a lot less sure how we would run the exhaust hose(s). I suppose we could point one at the existing room exhaust duct (air return), but substantially modifying the duct is probably a no-no. I've also considered installing a fan box in the door of the room, but I'm concerned that this will only drop the temperature a little. Even right now, with all the equipment on, the room is at 83 degrees with the door open. And the main building A/C turns off daily at 6 PM to conserve energy, so the adjacent room temperature rises at night. How would you cool this room? Let's say the goal is to bring the temperature with everything running from a steady state of around 90 degrees down to 75 (equivalently, to offset the heat produced by ten 1U servers).

    Read the article

  • Can't connect to STunnel when it's running as a service

    - by John Francis
    I've got STunnel configured to proxy non SSL POP3 requests to GMail on port 111. This is working fine when STunnel is running as a desktop app, but when I run the STunnel service, I can't connect to port 111 on the machine (using Outlook Express for example). The Stunnel log file shows the port binding is succeeding, but it never sees a connection. There's something preventing the connection to that port when STunnel is running as a service? Here's stunnel.conf cert = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [gmail] accept = 127.0.0.1:111 connect = pop.gmail.com:995 stunnel.log from service 2010.10.07 12:14:22 LOG5[80444:72984]: Reading configuration from file stunnel.conf 2010.10.07 12:14:22 LOG7[80444:72984]: Snagged 64 random bytes from C:/.rnd 2010.10.07 12:14:23 LOG7[80444:72984]: Wrote 1024 new random bytes to C:/.rnd 2010.10.07 12:14:23 LOG7[80444:72984]: PRNG seeded successfully 2010.10.07 12:14:23 LOG7[80444:72984]: Certificate: stunnel.pem 2010.10.07 12:14:23 LOG7[80444:72984]: Certificate loaded 2010.10.07 12:14:23 LOG7[80444:72984]: Key file: stunnel.pem 2010.10.07 12:14:23 LOG7[80444:72984]: Private key loaded 2010.10.07 12:14:23 LOG7[80444:72984]: SSL context initialized for service gmail 2010.10.07 12:14:23 LOG5[80444:72984]: Configuration successful 2010.10.07 12:14:23 LOG5[80444:72984]: No limit detected for the number of clients 2010.10.07 12:14:23 LOG7[80444:72984]: FD=156 in non-blocking mode 2010.10.07 12:14:23 LOG7[80444:72984]: Option SO_REUSEADDR set on accept socket 2010.10.07 12:14:23 LOG7[80444:72984]: Service gmail bound to 0.0.0.0:111 2010.10.07 12:14:23 LOG7[80444:72984]: Service gmail opened FD=156 2010.10.07 12:14:23 LOG5[80444:72984]: stunnel 4.34 on x86-pc-mingw32-gnu with OpenSSL 1.0.0a 1 Jun 2010 2010.10.07 12:14:23 LOG5[80444:72984]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 stunnel.log from desktop (working) process 2010.10.07 12:10:31 LOG5[80824:81200]: Reading configuration from file stunnel.conf 2010.10.07 12:10:31 LOG7[80824:81200]: Snagged 64 random bytes from C:/.rnd 2010.10.07 12:10:32 LOG7[80824:81200]: Wrote 1024 new random bytes to C:/.rnd 2010.10.07 12:10:32 LOG7[80824:81200]: PRNG seeded successfully 2010.10.07 12:10:32 LOG7[80824:81200]: Certificate: stunnel.pem 2010.10.07 12:10:32 LOG7[80824:81200]: Certificate loaded 2010.10.07 12:10:32 LOG7[80824:81200]: Key file: stunnel.pem 2010.10.07 12:10:32 LOG7[80824:81200]: Private key loaded 2010.10.07 12:10:32 LOG7[80824:81200]: SSL context initialized for service gmail 2010.10.07 12:10:32 LOG5[80824:81200]: Configuration successful 2010.10.07 12:10:32 LOG5[80824:81200]: No limit detected for the number of clients 2010.10.07 12:10:32 LOG7[80824:81200]: FD=156 in non-blocking mode 2010.10.07 12:10:32 LOG7[80824:81200]: Option SO_REUSEADDR set on accept socket 2010.10.07 12:10:32 LOG7[80824:81200]: Service gmail bound to 0.0.0.0:111 2010.10.07 12:10:32 LOG7[80824:81200]: Service gmail opened FD=156 2010.10.07 12:10:33 LOG5[80824:81200]: stunnel 4.34 on x86-pc-mingw32-gnu with OpenSSL 1.0.0a 1 Jun 2010 2010.10.07 12:10:33 LOG5[80824:81200]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.10.07 12:10:33 LOG7[80824:81844]: Service gmail accepted FD=188 from 127.0.0.1:24813 2010.10.07 12:10:33 LOG7[80824:81844]: Creating a new thread 2010.10.07 12:10:33 LOG7[80824:81844]: New thread created 2010.10.07 12:10:33 LOG7[80824:25144]: Service gmail started 2010.10.07 12:10:33 LOG7[80824:25144]: FD=188 in non-blocking mode 2010.10.07 12:10:33 LOG7[80824:25144]: Option TCP_NODELAY set on local socket 2010.10.07 12:10:33 LOG5[80824:25144]: Service gmail accepted connection from 127.0.0.1:24813 2010.10.07 12:10:33 LOG7[80824:25144]: FD=212 in non-blocking mode 2010.10.07 12:10:33 LOG6[80824:25144]: connect_blocking: connecting 209.85.227.109:995 2010.10.07 12:10:33 LOG7[80824:25144]: connect_blocking: s_poll_wait 209.85.227.109:995: waiting 10 seconds 2010.10.07 12:10:33 LOG5[80824:25144]: connect_blocking: connected 209.85.227.109:995 2010.10.07 12:10:33 LOG5[80824:25144]: Service gmail connected remote server from 192.168.1.9:24814 2010.10.07 12:10:33 LOG7[80824:25144]: Remote FD=212 initialized 2010.10.07 12:10:33 LOG7[80824:25144]: Option TCP_NODELAY set on remote socket 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): before/connect initialization 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write client hello A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server hello A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server certificate A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server done A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write client key exchange A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write change cipher spec A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write finished A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 flush data 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read finished A 2010.10.07 12:10:33 LOG7[80824:25144]: 1 items in the session cache 2010.10.07 12:10:33 LOG7[80824:25144]: 1 client connects (SSL_connect()) 2010.10.07 12:10:33 LOG7[80824:25144]: 1 client connects that finished 2010.10.07 12:10:33 LOG7[80824:25144]: 0 client renegotiations requested 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server connects (SSL_accept()) 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server connects that finished 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server renegotiations requested 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache hits 2010.10.07 12:10:33 LOG7[80824:25144]: 0 external session cache hits 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache misses 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache timeouts 2010.10.07 12:10:33 LOG6[80824:25144]: SSL connected: new session negotiated 2010.10.07 12:10:33 LOG6[80824:25144]: Negotiated ciphers: RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 2010.10.07 12:10:34 LOG7[80824:25144]: SSL socket closed on SSL_read 2010.10.07 12:10:34 LOG7[80824:25144]: Sending socket write shutdown 2010.10.07 12:10:34 LOG5[80824:25144]: Connection closed: 53 bytes sent to SSL, 118 bytes sent to socket 2010.10.07 12:10:34 LOG7[80824:25144]: Service gmail finished (0 left)

    Read the article

  • RHEL5: Can't create sparse file bigger than 256GB in tmpfs

    - by John Kugelman
    /var/log/lastlog gets written to when you log in. The size of this file is based off of the largest UID in the system. The larger the maximum UID, the larger this file is. Thankfully it's a sparse file so the size on disk is much smaller than the size ls reports (ls -s reports the size on disk). On our system we're authenticating against an Active Directory server, and the UIDs users are assigned end up being really, really large. Like, say, UID 900,000,000 for the first AD user, 900,000,001 for the second, etc. That's strange but should be okay. It results in /var/log/lastlog being huuuuuge, though--once an AD user logs in lastlog shows up as 280GB. Its real size is still small, thankfully. This works fine when /var/log/lastlog is stored on the hard drive on an ext3 filesystem. It breaks, however, if lastlog is stored in a tmpfs filesystem. Then it appears that the max file size for any file on the tmpfs is 256GB, so the sessreg program errors out trying to write to lastlog. Where is this 256GB limit coming from, and how can I increase it? As a simple test for creating large sparse files I've been doing: dd if=/dev/zero of=sparse-file bs=1 count=1 seek=300GB I've tried Googling for "tmpfs max file size", "256GB filesystem limit", "linux max file size", things like that. I haven't been able to find much. The only mention of 256GB I can find is that ext3 filesystems with 2KB blocks are limited to 256GB files. But our hard drives are formatted with 4K blocks so that doesn't seem to be it--not to mention this is happening in a tmpfs mounted ON TOP of the hard drive so the ext3 partition shouldn't be a factor. This is all happening on a 64-bit Red Hat Enterprise Linux 5.4 system. Interestingly, on my personal development machine, which is a 32-bit Fedora Core 6 box, I can create 300GB+ files in tmpfs filesystems no problem. On the RHEL5.4 systems it is no go.

    Read the article

  • A possible case of hacked email account. What kind of an attack is this?

    - by Rickesh John
    I own a Yahoo mail account. I am using this account for sending resumes and receive notifications from various job portals. But yesterday, I found that some 10-15 mails had been sent to random addresses from my account. Most of them had this format: hr@<companyname>.com I am pretty sure that I didn't send any mails to such addresses. Initially, I thought the job portals may be sending mails on my behalf and Yahoo is logging them, but then I saw the contents. The contents of all those mails were a URL, which I did not click. SCARED. Also, to top it off, my "Sending Name" has been changed to 'Nice Maria'!! o_0 I have taken the necessary measures and changed my password and the secret question. I cannot delete this account as this email is registered with all the job portals and other companies. Is this a simple case of my account being compromised or was I a victim of some web vulnerability? All the mails seem to be bot generated, with only a URL as the message body. Please advice.

    Read the article

  • Tomcat performing terribly for no apparent reason

    - by John
    We're running a game application .WAR on Tomcat 6 on an Amazon EC2 server, 8 core processor, 7gb RAM. The application uses a MySQL database hosted on Amazon RDS. This Facebook application takes ages to access when a mere 20-30 users are playing it. Big difference from 1-2 users. The entire .WAR is ~4mb, all static content hosted elsewhere. The server has never been close to running out of RAM. The CPU utilization has never been higher than 13.5-14%. Even with ~500 users that completely slowed everything to a standstill. The thread count or threadpools isn't close to being maxed out. I heightened maxthreads but it didn't make a noticeable difference. My theory is that Tomcat can only use one processor core, which would explain why it was slowed to a halt even though CPU usage was stably at 13-14% at the activity spike. But I'm struggling to understand why it would only use one CPU core. There is no processor cap in server.xml. The app contains several servlets (4 or 5). There is no mention of SingleThreadModel in the Java code. WHAT could be causing the application to run extremely slowly? If there is only 1-5 people on the application it runs fine. With 20-30 people it's barely contactable.

    Read the article

  • Mac OSX server command equivalent for dhclient?

    - by John Hall
    Is there an MacOS command that makes a dhcp request, and renews the old lease, drops it for a new one, or usefully reports errors or lack of response from a dhcp server? This would both help fix networking on the machine after problems on the network without rebooting and would also be useful to diagnose wider networking problems from a mac. I can not find any command equivalent of dhclient though obviously some component must be serving this purpose. The question is, is that component exposed to a command line interface? I am biased to the command line for these features and may have overlooked settings panels or tools that might solve it using a gui interface. I believe this question is at the heart of this other question: Is there an equivalent command for 'init.d/networking restart' in OS X

    Read the article

  • Understanding Security Certificates (and thier pricing)

    - by John Robertson
    I work at a very small company so certificate costs need to be absolutely minimal. However for some applications we do Need to have our customers get that warm fuzzy not-using-a-self-signed certificate feeling. Since creating a "certificate authority" with makecert really just means creating a public/private key pair, it seems pretty clear that creating a public/private key pair FROM such a "certificate authority" really just means generating a second public/private key pair and signing both with the private key that belongs to the "certificate authority". Since the keys are signed anyone can verify they came from the certificate authority I created, or if verisign gave me the pair they sign it with one of their own private keys, and anyone can use verisigns corresponding public key to confirm verisign as the source of the keys. Given this I don't understand when I go to verisign or godaddy why they have rates only for yearly plans, when all I really want from them is a single public/private key pair signed with one of their private keys (so that anyone else can use their public keys to confirm that, yes, they gave me that public/private key pair and they confirmed I was who I said I was so you can trust my public/private key pair as belonging to a legitimate third party). Clearly I am misunderstanding something, what is it? Does verisign retire their public/private key pairs periodically so that my verisign signed key pair "expires" and I need new ones? Edit: I learned that the certificate has an internal expiration date and it also maintains an internal value stating whether it can be used to sign other certificates (i.e. sign other private/public key pairs stored as certificates). Can't I get a few (even one) non-signing certificate signed by someone like verisign that I can use for authentication/encryption without a yearly subscription?

    Read the article

  • linux: automount internal hard drive during boot?

    - by John Doe
    i try to create my own NAS and i need to automount the internal sata disks during boot i know i could do using fstab but im searching for a more easy/generalized way so its easier to scale with less handwork needed for every hard drive attached (or every mainboard added to the cluster) so anyone knows how to automount internal disks without using fstab like ubuntu does for usb drives? im using ubuntu server 9.10 thx all

    Read the article

  • converting huge MPEG audio files to something smaller

    - by john
    I've got some large MPEG audio files (144 MB each) that I'm looking to convert to something smaller so I can send them out as attachments to an email. Any suggestions on the software to use? I'm looking for something free that will run on Windows. I don't really care what the destination file is, mp3 would be nice. If there's a web service out there that would do this without the need to download any software to my machine, that would be even better, but I would be more than happy just getting it done any way I can. Thanks!

    Read the article

  • change ip address verizon fios [closed]

    - by John Smith
    One well documented way to change a dynamically assigned ip address is to log into the router configuration settings and change the mac address , disconnect the router and modem, and to turn it all back on. This actually worked with a basic modem connected by ethernet directly to a laptop, spoofing laptop mac address, with a cable internet provider. Now this question is specific to fiber optic internet providers who bundle with tv and internet (verizon fios, comcast xfinity). Verizon fios installation comes with an actiontec router, and there is a built in way to clone the mac address in the router configuration settings. What will happen if the mac address changes from what verizon installed it as? Will they get angry and disconnect service? Will other services other than internet stop working (tv or phone)?

    Read the article

  • Permissions on mac for itunes library with multiple users - idea

    - by John
    I currently have a lot of music on an external drive and my itunes set up from there. However, periodically, when the external drive isn't connected, itunes will default back to the library location of my home directory user path. I don't want to mess with an external drive, as my mac HD is large enough to house the music collection. However, I have 4 family members - all with their own logins - using this same gob of music. I don't want 4 copies of the library, only one with all libraries referencing it. So, what I want to do is: 1 - move all music files to a shared directory at /Macintosh HD/users/music. I created this directory and adjusted permissions, so all four users can read and write to this directory. 2 - get all four accounts to reference this library instead of the external or local home locations I am hoping I can just check the box to keep library organized in my account, which is the admin and let itunes move it all. Then delete current libraries for each account and re-add from the new shared location. Will the itunes organization process cause permissions issues either by setting permissions to all the files access to my account only or write permissions or any other 'gotcha'? I am having a hard time coming up with a smooth solution that won't break everything and cause me to have mega duplicates or access issues. I would prefer not to do any xml library file editing if possible. Am I dreaming? Thanks for help.

    Read the article

  • Copying large files from USB devices to the internal hard drive fails on Mac OS

    - by John M. P. Knox
    I have a second-generation 13" MacBook Air running Mac OS X 10.6.6 with a 2.13 GHz processor, 4 GB of RAM, and a 256 GB SSD hard disk. I often get failures when I attempt to copy a large file or large collection of files from an external USB drive (typically a "Firewire" generation Drobo) to the internal drive. The failure behaves almost exactly as if I had pulled the USB cable from the computer in mid-transfer. I get a warning that I have removed the hard disk improperly. After this event, the drive no longer appears mounted in the finder, and I have to unplug and reinsert the USB cable to mount the drive again. I have also seen a similar problem when using Aperture 3 to import a large number of photos and videos from a USB Compact Flash card reader. The import will fail and I will have to unplug the Card Reader and import the missing items. Oddly, reversing the direction of the copy seems pretty reliable. I've never had a problem copying a large file to a USB device, meaning that I have quite a few large files which are stranded on my Drobo. Model Identifier: MacBookAir3,2 Boot ROM Version: MBA31.0061.B01 I have seen a similar issue reported on Apple's website: http://discussions.apple.com/thread.jspa?threadID=2648590&tstart=0 The only suggested resolutions there seems to be switching to another form of connectivity (e.g. firewire, which does not exist on MacBook Air), or downgrading to Mac OS 10.6.4, or reverting the USB kernel extensions to the 10.6.4 versions: http://discussions.apple.com/message.jspa?messageID=12566073#12582956 I'm not too keen on the idea of downgrading kernel extensions. Does anyone know of a hardware revision without this issue that I can trade up to? Are there any other potential solutions out there?

    Read the article

  • SSL Proxy: Forwarding without the encryption

    - by John
    I have a python application listening on port 9001 for HTTP traffic. I'm trying to configure Apache (or anything, really) to listen on port 443 for HTTPS connections, and then forward the connection, sans encryption, to port 9001 on the same machine. My application would then reply via the proxy, where the encryption would be reapplied, and returned to the client transparently. I'm not doing anything crazy with the site names and SSL certs, I have one public IP, one hostname, and one SSL cert. Stripping the encryption at the proxy doesn't seem to be a common requirement. Is what I'm asking for a normal requirement? Are there other concerns with this sort of configuration?

    Read the article

  • Is it possible to mount a hot-swappable drive when it is turned on?

    - by John
    In my PC, I have a hot-swap drive. Usually I keep it off to save power. I only really use it when accessing from another PC on the network. Is it possible to configure /etc/fstab to mount this drive when I turn it on (without having to shake the mouse, open file manager and click the drive to have it mounted? Currently, I have: UUID=a869e5ca-7d3b-4d64-91e2-eadbecd8c9e5 /media/i-TVShows ext4 rw,nosuid,nodev,auto,user,uhelper=udisks 0 0 in my /etc/fstab file but it doesn't seem to do the trick. I want the drive to be user-mountable, on power on, with RW access, and I'm thinking of adding 'nofail'...this is my first time writing to the fstab file, and a lot of the parameters I took from the output of 'mount' so feel free to correct any oddness you find. Thanks

    Read the article

  • How can I enable PHP5 for a site? Having problems with every single method.

    - by John Stephens
    I'm working on a client site that is hosted on someone's DIY Debian Linux server [Apache/1.3.33 (Debian GNU/Linux)], and I'm trying to install a script that requires PHP5. By default, the server parses .php files with PHP 4.3.10-22, which is configured at /etc/php4/apache/php.ini, according to phpinfo(). On the server I can see a config directory for PHP5 adjacent to the PHP4 directory: /etc/php5.0/apache2/php.ini. I have tried multiple methods to enable PHP5 for the document root where the site's files are hosted, including all available methods mentioned here. By far, the most common suggestion I've found is to add one or both of the following lines to the site's .htaccess file: AddHandler application/x-httpd-php5 .php AddType application/x-httpd-php5 .php Trouble is, when either or both of those lines are present, the site forces my browser to download any .php files requested, without parsing the PHP at all. All of the other methods mentioned in the above article cause a 500 Internal Server Error. There is no hosting control panel I can access in a browser to enable PHP5 for the site, but I do have shell access. When I asked the server administrator about this issue, he encouraged me to search for the answer on Google. Where could I begin to troubleshoot this issue? Are there ways to test or verify the server's specific PHP5 installation and configuration, using the command line or some other method? Do you have other suggestions to enable PHP5?

    Read the article

  • two operating systems sharing their file systems with eachother (Windows and Linux)

    - by John Kube
    I have two operating systems installed on my notebook computer, Windows Vista and Ubuntu Linux. When I boot up, I'm presented with a bootloader which allows me to choose which one I want to load. I'm interested in sharing each operating system's file system with the other, such that I could access my Windows files from Linux and vice-versa. Is this possible, and if so how would one go about setting it up? Feel free to just post a link to an existing solution if there is one. I would Google for this myself, but I don't even know what to search for, as I don't know what this is called.

    Read the article

  • Custom Filter in cPanel to Auto-Delete Emails with Russian Characters

    - by John Conde
    I get a lot of spam to my email account from Russia. The emails themselves (name, subject, body) are in Russian and I was hoping to create a custom filter in cPanel (not in SpamAssassin but in cPanel itself) to catch these emails and delete them before they hit my inbox. I've tried setting up rules to flag emails with these characters but they still are getting through. This leads me to believe that there is an encoding issue at play here. Unfortunately I do not know how to overcome this. Ideas?

    Read the article

  • AutoHotKey - change mouse position and click a specific key every time window comes up

    - by John
    I'm a newbie to AHK, learning the basics. I'm using Notepad as an example - I want to hit the Cancel key every time I close Notepad and it asks if I want to Save/Don't Save/Cancel. I've come up with the script below and it works once but then I have to reload the script to do it again. I want it to hit Cancel every time the question box comes up. I thought Loop would work but am doing something wrong. Any ideas why, anyone? Loop IfWinExist Notepad, { WinWait Notepad WinActivate Click 312, 109 return }

    Read the article

  • OpenSolaris: unable to contact repository, connected to internet via proxy

    - by John-ZFS
    Opensolaris b134: unable to set packages catalog this system is connected to internet via proxy, while this works on browser, how to make console/terminal aware? user1@opensolaris134:~# pkg set-authority -O http://pkg.opensolaris.org/dev opensolaris.org pkg set-publisher: Could not refresh the catalog for opensolaris.org user1@opensolaris134:~# pkg image-update pkg: 0/1 catalogs successfully updated: Unable to contact valid package server Encountered the following error(s): Unable to contact any configured publishers. This is likely a network configuration problem.

    Read the article

  • Why doesn't environment variable get updated in cmd without restart?

    - by John Nevermore
    CMD commands: setx SOMEVARIABLE "newpath" /M setx SOMEVARIABLE "%SOMEVARIABLE%;newpath2" /M Expected output on ECHO %SOMEVARIABLE%: newpath;newpath2 Actual output: %SOMEVARIABLE% Actual value stored (From System Properties-Environment Variables GUI): %SOMEVARIABLE%;newpath2 The only way i can get the expected output is, if i restart the command prompt every time i modify the environment variable. I'm using this command to automate environment variable value appending multiple times during the same process. Why doesn't environment variable get updated in cmd without restart? Is it possible to get the updated value of %SOMEVARIABLE% without restarting the command prompt?

    Read the article

  • Lotus Notes wants to open some emails with web browser, rather than within Notes itself

    - by John K.
    I have a problem with Lotus notes 8.5.1 wanting to open certain emails in my web browser, rather than within Notes itself. The emails that do this, seem to have some html in the note (Not just a link, but the note itself) This is a recent upgrade from 8.0.2 which had a similar problem, but it showed all of the html formatting characters in the notes, rendering it almost unreadable. I was hoping a fresh install of Notes would fix it, but it did not. I am using the same version of Notes & Win XP at work, and I do not have the problem. I am guessing that it is a setting on my home computer and not Notes, but I have no idea what it would be.

    Read the article

  • 16TB Volumes and SNMP On Windows

    - by John K
    As volumes larger than 16TB became more common, it was recognized that the 32 bit value used to report disk size and usage within the standard "HOST-RESOURCES" MIB in SNMP was not large enough to report the proper disk size. Net-SNMP seems to have addressed this issue by simply manipulating the value of "AllocationUnits" to maintain a 32 bit value for disk utilization (since total disk size/usage is equal to the 32 bit space value times the allocation unit), to allow for the calculation of a volume larger than 8/16TB. Presuming you don't have any reporting interest in the allocation unit, this seems like a fine solution. https://bugzilla.redhat.com/show_bug.cgi?id=654384 Window's built in SNMP service, however, seems to continue to suffer from this error, simply reporting the modulo of the used/assigned disk space, resulting in inaccurate disk size reporting. Is there a way to enable Windows to correctly report disk usage for volumes over 16TB? We attempted to simply install Net-SNMP 5.5 x64 and disable Windows SNMP service entirely, however this unfortunately did not fix our issue. I've seen people in the Cacti community mention simply scripting out a solution. Unfortunately, we're using Observium for quick and basic systems monitoring. If the issue can't be correct on the Window's side, can Observium be made to report custom MIBs?

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >