Search Results

Search found 4637 results on 186 pages for 'john allsup'.

Page 49/186 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • Dual NVidia graphics cards in Ubuntu / xorg.conf mania

    - by John Zwinck
    I have two NVidia graphics cards: Quadro NVS 295 (PCI Express, dual DisplayPort outputs) GeForce FX 5200 (PCI, DVI and VGA outputs) I have three identical monitors, two on DisplayPort and one on DVI. I'm on Ubuntu Hardy (and cannot currently dist-upgrade for separate reasons). I use the "nvidia" driver. What's new is the GeForce card and the third monitor. I currently have the dual DisplayPort monitors working fine. Here are the display-related parts of my xorg.conf: Section "ServerLayout" Identifier "Default Layout" Screen "PCI-Express Screen" 0 0 # adding this makes X fail to start: Screen "PCI Screen" 0 Inputdevice "Generic Keyboard" Inputdevice "Configured Mouse" EndSection Section "Module" Load "glx" # not sure why/if this is needed EndSection Section "Monitor" Identifier "DELL 2408WFP" Option "DPMS" EndSection Section "Device" Identifier "NVIDIA Quadro NVS 295" Driver "nvidia" Option "RenderAccel" "true" Screen 0 BusID "PCI:2:0:0" EndSection Section "Device" Identifier "NVIDIA GeForce FX 5200" Driver "nvidia" Option "RenderAccel" "true" Screen 1 BusID "PCI:6:4:0" EndSection Section "Screen" Identifier "PCI-Express Screen" Device "NVIDIA Quadro NVS 295" Monitor "DELL 2408WFP" Defaultdepth 24 Option "TwinView" "True" Option "UseEdidFreqs" "True" Option "MetaModes" "1920x1200 +0+1200, 1920x1200 +0+0" EndSection Section "Screen" Identifier "PCI Screen" Device "NVIDIA GeForce FX 5200" Monitor "DELL 2408WFP" Defaultdepth 24 Option "TwinView" "True" Option "UseEdidFreqs" "True" Option "MetaModes" "1920x1200 +0+0" EndSection I use nvidia-settings to configure my monitors, and it does not show the second GPU. lspci, though, shows: 02:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd 06:04.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] Which is where I got the BusID settings for the two devices (when I just had one device, I didn't have any BusID listed...and adding the BusID hasn't broken anything). What am I missing? How can I make nvidia-settings show my second GPU so I can then configure its monitor?

    Read the article

  • Disk2VHD image used in Win 7 as a bootable VPC

    - by John
    I have used Disk2VHD to create a VHD of my old XP Laptop's boot drive. I would like to use it as an XP virtual machine on my new Win7 machine. I have tried doingit on a second XP machine and the VPC boots properly using that VHD but under Win7 I can't get it to act as the boot disk for the VPC. Any ideas? TIA J

    Read the article

  • Trouble connecting a Ubuntu system to IPv6 tunnel over NAT

    - by John Millikin
    I'm trying to set up an IPv6 tunnel, via Hurricane Electric's tunnel-broker service. I've configured my system using their example commands: # $ipv4a = tunnel server's IPv4 IP # $ipv4b = user's IPv4 IP # $ipv6a = tunnel server's side of point-to-point /64 allocation # $ipv6b = user's side of point-to-point /64 allocation ip tunnel add he-ipv6 mode sit remote $ipv4a local $ipv4b ttl 255 ip link set he-ipv6 up ip addr add $ipv6b dev he-ipv6 ip route add ::/0 dev he-ipv6 And have configured my desktop to be in my NAT router's DMZ. The router is running Tomato firmware. But I can't ping any IPv6 services: $ ping6 -I he-ipv6 '2001:470:1f04:454::1' PING 2001:470:1f04:454::1(2001:470:1f04:454::1) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes From 2001:470:1f04:454::2 icmp_seq=1 Destination unreachable: Address unreachable From 2001:470:1f04:454::2 icmp_seq=2 Destination unreachable: Address unreachable I can ping my local address: $ ping6 -I he-ipv6 '2001:470:1f04:454::2' PING 2001:470:1f04:454::2(2001:470:1f04:454::2) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes 64 bytes from 2001:470:1f04:454::2: icmp_seq=1 ttl=64 time=0.037 ms 64 bytes from 2001:470:1f04:454::2: icmp_seq=2 ttl=64 time=0.039 ms I don't know much about routing, but results I found online suggested the output of ip -6 route and ip addr could be useful: $ ip -6 route 2001:470:1f04:454::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 fe80::/64 dev virbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 default dev he-ipv6 metric 1024 mtu 1480 advmss 1420 hoplimit 4294967295 $ ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 100 link/ether 00:1c:c0:a1:98:b2 brd ff:ff:ff:ff:ff:ff inet 192.168.1.10/24 brd 192.168.1.255 scope global eth1 inet6 fe80::21c:c0ff:fea1:98b2/64 scope link valid_lft forever preferred_lft forever 3: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 36:4c:33:ab:0d:c6 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 inet6 fe80::344c:33ff:feab:dc6/64 scope link valid_lft forever preferred_lft forever 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:76:62:6e:65:74 brd ff:ff:ff:ff:ff:ff 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 7e:29:5e:7c:ba:93 brd ff:ff:ff:ff:ff:ff 6: sit0: <NOARP> mtu 1480 qdisc noop state DOWN link/sit 0.0.0.0 brd 0.0.0.0 7: he-ipv6@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN link/sit 24.130.225.239 peer 72.52.104.74 inet6 2001:470:1f04:454::2/64 scope global valid_lft forever preferred_lft forever inet6 fe80::1882:e1ef/128 scope link valid_lft forever preferred_lft forever

    Read the article

  • Outlook Web Access and LDAPS

    - by john
    Hello, Having trouble setting up ldaps for password change facility in OWA. we've installed the certificate according to MS article http://support.microsoft.com/kb/321051. but, even a simple test from the domain controller with ldp does not work. thanks for any tips.

    Read the article

  • How do I connect two computers with a LAN cable?

    - by John
    I have two machines - Windows XP and a laptop using Windows 7. I connected them with a WLAN cable. On the Windows XP machine, I set the IP address to 192.168.0.10. On the Windows 7 laptop, I set the IP address to 192.168.0.20. The laptop can see the Windows XP machine, but Windows XP machine cannot see the Windows 7 machine. But this does NOT concern me. I want to move the files from my desktop (Windows XP) to Windows 7 (laptop). That's why I'm going through all this. The problem is that when I try to connect from Windows 7 to Windows XP machine, I get this window: I don't understand what username/password is needed. I use none on the Windows XP machine. I tried all usernames - no success. Please explain in deep details how to solve my problem so I can connect to my Windows XP machine. EDIT: Maybe this can help: the Windows XP machine is named 'I' and '???????? III' is the name of the laptop. Both computers share one workgroup - WORKGROUP.

    Read the article

  • ZFS + FreeBSD + virtualbox

    - by John
    Hi, I'm configuring a FreeBSD server hosting virtualbox serving half dozen mission critical busy mail servers. I just learned ZFS, I'm quite attracted, but have a few questions: what is the CPU overhead of ZFS? I googled and found little (or no) benchmark for that. from what I learned, when ZFS updates files, it keeps the old file as snapshot, and write the updated part for the new version. However that would mean for each snapshot it keeps that require significant storage overhead. How much is this storage overhead? For example, suppose I have 2TB usable space, how much space can actually be used for the latest version of files one year later? is FreeBSD with ZFS hosting virtualbox serving half dozen busy guest mission critical mail servers a reasonable combination? Anything particular to be careful with? And can I still choose ZFS for the guest OSs? This is because I may build another identical such box for redundancy, and will need to do some mirroring between each pair of the guest systems across the boxes. I'm trying to configure a Dell R710 for this. From what I learned, I shouldn't choose any RAID at all, is that true? In that case, are the drives still arrive hot swappable? this may sounds a bit pathetic, but since I have no experience with ZFS at all, and this is a mission critical server, so just ask just in case: I'm choosing twin Intel L5630 processors, and 6 x 600GB 15K RPM Serial-Attach SCSI drives. If I need more space in the future, I would just hot swap some drivers with larger capacity to expand the storage. There is no problem with these, right?

    Read the article

  • high load average, high wait, dmesg raid error messages (debian nfs server)

    - by John Stumbles
    Debian 6 on HP proliant (2 CPU) with raid (2*1.5T RAID1 + 2*2T RAID1 joined RAID0 to make 3.5T) running mainly nfs & imapd (plus samba for windows share & local www for previewing web pages); with local ubuntu desktop client mounting $HOME, laptops accessing imap & odd files (e.g. videos) via nfs/smb; boxes connected 100baseT or wifi via home router/switch uname -a Linux prole 2.6.32-5-686 #1 SMP Wed Jan 11 12:29:30 UTC 2012 i686 GNU/Linux Setup has been working for months but prone to intermittently going very slow (user experience on desktop mounting $HOME from server, or laptop playing videos) and now consistently so bad I've had to delve into it to try to find what's wrong(!) Server seems OK at low load e.g. (laptop) client (with $HOME on local disk) connecting to server's imapd and nfs mounting RAID to access 1 file: top shows load ~ 0.1 or less, 0 wait but when (desktop) client mounts $HOME and starts user KDE session (all accessing server) then top shows e.g. top - 13:41:17 up 3:43, 3 users, load average: 9.29, 9.55, 8.27 Tasks: 158 total, 1 running, 157 sleeping, 0 stopped, 0 zombie Cpu(s): 0.4%us, 0.4%sy, 0.0%ni, 49.0%id, 49.7%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 903856k total, 851784k used, 52072k free, 171152k buffers Swap: 0k total, 0k used, 0k free, 476896k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3935 root 20 0 2456 1088 784 R 2 0.1 0:00.02 top 1 root 20 0 2028 680 584 S 0 0.1 0:01.14 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.12 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 7 root 20 0 0 0 0 S 0 0.0 0:00.16 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root 20 0 0 0 0 S 0 0.0 0:00.42 events/0 10 root 20 0 0 0 0 S 0 0.0 0:02.26 events/1 11 root 20 0 0 0 0 S 0 0.0 0:00.00 cpuset 12 root 20 0 0 0 0 S 0 0.0 0:00.00 khelper 13 root 20 0 0 0 0 S 0 0.0 0:00.00 netns 14 root 20 0 0 0 0 S 0 0.0 0:00.00 async/mgr 15 root 20 0 0 0 0 S 0 0.0 0:00.00 pm 16 root 20 0 0 0 0 S 0 0.0 0:00.02 sync_supers 17 root 20 0 0 0 0 S 0 0.0 0:00.02 bdi-default 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/0 19 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/1 20 root 20 0 0 0 0 S 0 0.0 0:00.02 kblockd/0 21 root 20 0 0 0 0 S 0 0.0 0:00.08 kblockd/1 22 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpid 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_notify 24 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_hotplug 25 root 20 0 0 0 0 S 0 0.0 0:00.00 kseriod 28 root 20 0 0 0 0 S 0 0.0 0:04.19 kondemand/0 29 root 20 0 0 0 0 S 0 0.0 0:02.93 kondemand/1 30 root 20 0 0 0 0 S 0 0.0 0:00.00 khungtaskd 31 root 20 0 0 0 0 S 0 0.0 0:00.18 kswapd0 32 root 25 5 0 0 0 S 0 0.0 0:00.00 ksmd 33 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/0 34 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/1 35 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/0 36 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/1 203 root 20 0 0 0 0 S 0 0.0 0:00.00 ksuspend_usbd 204 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd 205 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/0 206 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/1 207 root 20 0 0 0 0 S 0 0.0 0:00.14 ata_aux 208 root 20 0 0 0 0 S 0 0.0 0:00.01 scsi_eh_0 dmesg suggests there's a disk problem: .............. (previous episode) [13276.966004] raid1:md0: read error corrected (8 sectors at 489900360 on sdc7) [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13279.569186] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13279.569211] ata4.00: irq_stat 0x40000008 [13279.569230] ata4.00: failed command: READ FPDMA QUEUED [13279.569257] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13279.569262] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13279.569306] ata4.00: status: { DRDY ERR } [13279.569321] ata4.00: error: { UNC } [13279.575362] ata4.00: configured for UDMA/133 [13279.575388] ata4: EH complete [13283.169224] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13283.169246] ata4.00: irq_stat 0x40000008 [13283.169263] ata4.00: failed command: READ FPDMA QUEUED [13283.169289] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13283.169294] res 41/40:00:07:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13283.169331] ata4.00: status: { DRDY ERR } [13283.169345] ata4.00: error: { UNC } [13283.176071] ata4.00: configured for UDMA/133 [13283.176104] ata4: EH complete [13286.224814] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13286.224837] ata4.00: irq_stat 0x40000008 [13286.224853] ata4.00: failed command: READ FPDMA QUEUED [13286.224879] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13286.224884] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13286.224922] ata4.00: status: { DRDY ERR } [13286.224935] ata4.00: error: { UNC } [13286.231277] ata4.00: configured for UDMA/133 [13286.231303] ata4: EH complete [13288.802623] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13288.802646] ata4.00: irq_stat 0x40000008 [13288.802662] ata4.00: failed command: READ FPDMA QUEUED [13288.802688] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13288.802693] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13288.802731] ata4.00: status: { DRDY ERR } [13288.802745] ata4.00: error: { UNC } [13288.808901] ata4.00: configured for UDMA/133 [13288.808927] ata4: EH complete [13291.380430] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13291.380453] ata4.00: irq_stat 0x40000008 [13291.380470] ata4.00: failed command: READ FPDMA QUEUED [13291.380496] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13291.380501] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13291.380577] ata4.00: status: { DRDY ERR } [13291.380594] ata4.00: error: { UNC } [13291.386517] ata4.00: configured for UDMA/133 [13291.386543] ata4: EH complete [13294.347147] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13294.347169] ata4.00: irq_stat 0x40000008 [13294.347186] ata4.00: failed command: READ FPDMA QUEUED [13294.347211] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13294.347217] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13294.347254] ata4.00: status: { DRDY ERR } [13294.347268] ata4.00: error: { UNC } [13294.353556] ata4.00: configured for UDMA/133 [13294.353583] sd 3:0:0:0: [sdc] Unhandled sense code [13294.353590] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [13294.353599] sd 3:0:0:0: [sdc] Sense Key : Medium Error [current] [descriptor] [13294.353610] Descriptor sense data with sense descriptors (in hex): [13294.353616] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [13294.353635] 23 05 6a 06 [13294.353644] sd 3:0:0:0: [sdc] Add. Sense: Unrecovered read error - auto reallocate failed [13294.353657] sd 3:0:0:0: [sdc] CDB: Read(10): 28 00 23 05 6a 00 00 00 08 00 [13294.353675] end_request: I/O error, dev sdc, sector 587557382 [13294.353726] ata4: EH complete [13294.366953] raid1:md0: read error corrected (8 sectors at 489900544 on sdc7) [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror and they're happening quite frequently, which I guess is liable to account for the performance problem(?) # dmesg | grep mirror [12433.561822] raid1: sdc7: redirecting sector 489900464 to another mirror [12449.428933] raid1: sdb7: redirecting sector 489900504 to another mirror [12464.807016] raid1: sdb7: redirecting sector 489900512 to another mirror [12480.196222] raid1: sdb7: redirecting sector 489900520 to another mirror [12495.585413] raid1: sdb7: redirecting sector 489900528 to another mirror [12510.974424] raid1: sdb7: redirecting sector 489900536 to another mirror [12526.374933] raid1: sdb7: redirecting sector 489900544 to another mirror [12542.619938] raid1: sdc7: redirecting sector 489900608 to another mirror [12559.431328] raid1: sdc7: redirecting sector 489900616 to another mirror [12576.553866] raid1: sdc7: redirecting sector 489900624 to another mirror [12592.065265] raid1: sdc7: redirecting sector 489900632 to another mirror [12607.621121] raid1: sdc7: redirecting sector 489900640 to another mirror [12623.165856] raid1: sdc7: redirecting sector 489900648 to another mirror [12638.699474] raid1: sdc7: redirecting sector 489900656 to another mirror [12655.610881] raid1: sdc7: redirecting sector 489900664 to another mirror [12672.255617] raid1: sdc7: redirecting sector 489900672 to another mirror [12672.288746] raid1: sdc7: redirecting sector 489900680 to another mirror [12672.332376] raid1: sdc7: redirecting sector 489900688 to another mirror [12672.362935] raid1: sdc7: redirecting sector 489900696 to another mirror [12674.201177] raid1: sdc7: redirecting sector 489900704 to another mirror [12698.045050] raid1: sdc7: redirecting sector 489900712 to another mirror [12698.089309] raid1: sdc7: redirecting sector 489900720 to another mirror [12698.111999] raid1: sdc7: redirecting sector 489900728 to another mirror [12698.134006] raid1: sdc7: redirecting sector 489900736 to another mirror [12719.034376] raid1: sdc7: redirecting sector 489900744 to another mirror [12734.545775] raid1: sdc7: redirecting sector 489900752 to another mirror [12734.590014] raid1: sdc7: redirecting sector 489900760 to another mirror [12734.624050] raid1: sdc7: redirecting sector 489900768 to another mirror [12734.647308] raid1: sdc7: redirecting sector 489900776 to another mirror [12734.664657] raid1: sdc7: redirecting sector 489900784 to another mirror [12734.710642] raid1: sdc7: redirecting sector 489900792 to another mirror [12734.721919] raid1: sdc7: redirecting sector 489900800 to another mirror [12734.744732] raid1: sdc7: redirecting sector 489900808 to another mirror [12734.779330] raid1: sdc7: redirecting sector 489900816 to another mirror [12782.604564] raid1: sdb7: redirecting sector 1242934216 to another mirror [12798.264153] raid1: sdc7: redirecting sector 1242935080 to another mirror [13245.832193] raid1: sdb7: redirecting sector 489898296 to another mirror [13261.376929] raid1: sdb7: redirecting sector 489898304 to another mirror [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror although the arrays are still running on all disks - they haven't given up on any yet: # cat /proc/mdstat Personalities : [raid1] [raid0] md10 : active raid0 md0[0] md1[1] 3368770048 blocks super 1.2 512k chunks md1 : active raid1 sde2[2] sdd2[1] 1464087824 blocks super 1.2 [2/2] [UU] md0 : active raid1 sdb7[0] sdc7[2] 1904684920 blocks super 1.2 [2/2] [UU] unused devices: <none> So I think I have some idea what the problem is but I am not a linux sysadmin expert by the remotest stretch of the imagination and would really appreciate some clue checking here with my diagnosis and what do I need to do: obviously I need to source another drive for sdc. (I'm guessing I could buy a larger drive if the price is right: I'm thinking that one day I'll need to grow the size of the array and that would be one less drive to replace with a larger one) then use mdadm to fail out the existing sdc, remove it and fit the new drive fdisk the new drive with the same size partition for the array as the old one had use mdadm to add the new drive into the array that sound OK?

    Read the article

  • Automate uploading of videos to YouTube

    - by John
    Here's the problem: I would like to keep lots of home made videos. Of course, they are subject to being lost, or somebody could steal the the computer, or water or fire could destroy them. Secondly, I have to plug in my hard drive every time I want to watch something, which I find slow and cumbersome. I was thinking that perhaps I could upload the videos to Youtube with the privacy set to invite only and then delete the video from the hard drive automatically. Could this be done?

    Read the article

  • Photoshop CS6 beta - functionality

    - by Biker John
    Is Photoshop beta cs6 full featured, or is just a preview of SOME of the new functions? I want to make sure before I remove my cs5 version. There are two contradictions that are making me unsure (as written on the official cs6 beta download page): Explore Photoshop CS6 beta for a sneak preview of some of the incredible performance enhancements, imaging magic, and creativity tools we are working on... AND Photoshop CS6 beta includes all the features in Photoshop CS6 and Photoshop CS6 Extended. Take this opportunity to try out the 3D image editing and quantitative image analysis capabilities of Photoshop Extended*, but note that—while these features will be included in the shipping version of Photoshop CS6 Extended—they will not be included in the shipping version of Photoshop CS6...

    Read the article

  • Windows explorer locks files

    - by John Prince
    I'm using Office 2010 & Windows 7 Home Premium 64-bit. My problem starts when I attempt to save e-mail messages to my PC that I have received via Outlook (my ISP is Comcast). I'm using the default .msg file extension option when I attempt to save these e-mails. The resultant files are locked and do not show the normal "envelope" icon. Instead, it’s a “blank page” icon with the right upper corner folded in. These files refuse to open either by double clicking on them or right clicking and trying to open them with Outlook. And when I return to Outlook, I discover that Outlook is now hung up and I have to close it via the Task Manager. To make matters worse, I’ve also discovered that every e-mail message that I've saved on my PC over the years has also somehow become locked and their original "envelope" icon has been replaced with the "blank page" icon. I found and installed an application called LockHunter. As a result, when I right click on a saved and locked e-mail message, I’ve given an option to find out what's locking it. Each time I'm told that the culprit is Windows explorer.exe. When I unlock the file the normal envelope icon is sometimes displayed (but not always) but at least the file can then be opened. But the file is still “squirrely” as it can’t be moved or saved to a folder until it’s unlocked again. On this second attempt, LockHunter says it’s now locked by Outlook.exe. By the way, I don't have this issue when I save Word, Excel & PowerPoint files; only with Outlook. I've exhausted every remedy that I can think of including: making sure that the file and folder options are checked to always show icons and not thumbnails; running the Windows 7 & Office 2010 repair options which find nothing amiss; running a complete system scan with Windows Malicious Software Removal Tool with negative results; verifying that Outlook is the default for opening e-mails; updating all of my applications via Secunia Personal Software Inspector; uninstalling every application that I felt was unnecessary; doing a registry cleanup via CC Cleaner; having Windows Security Essentials always on (it did find one Java Trojan recently which was quarantined and then deleted); uninstalling a bunch of non-Microsoft shell extensions; and deactivating all of the Outlook Add-ins and then re-activating each one. None of this solves the problem. I’d welcome any advice on how to resolve this.

    Read the article

  • Dedicate a NIC to a Virtualbox VM

    - by John Gardeniers
    On a machine with multiple NICs, running either Windows or Linux, is it possible to dedicate a NIC to a VM such that the host won't even try to use it for itself? I suspect it isn't even possible but if it is, which OS and version and just how would I set it up? The reason for this, apart from academic curiosity, is that I'm trying to set up a network lab for testing purposes. I currently have only a single spare machine, otherwise this wouldn't be an issue. One of the VMs will be the firewall for this lab network, so will need a dedicated NIC for the WAN interface. Neither ESXi nor Xen server will run on the machine, so I have to use a host OS.

    Read the article

  • Can't install shared printer on Windows 7

    - by John Billups
    I have a shared printer on Windows XP desktop. When trying to install printer on a network laptop using Windows 7, I get a driver not found on network message. The printer OEM does not have a specific driver for Windows 7, they say to use the Windows 7 driver. I can install the printer as a local printer to the laptop. It does find the driver on the laptop, but I can't install it from the shared desktop.

    Read the article

  • MacBook hangs when restarting to Vista through BootCamp

    - by John
    I have Vista Pro installed on my Macbook and while it mostly works well, sometimes when I select Windows from the boot screen after turning the thing on, the screen just goes black and it all stops. If I hold the power button until it powers down and repeat, it works. It's not getting as far as Windows at all, I think, because if Windows was previously shut down to Hibernate, it still restores fine... and I'm pretty sure if Windows' startup had hung and been force-rebooted my session would be borked?

    Read the article

  • Spamassassin not work

    - by John
    I set the threshold to 7.5. But this mail still can't work thought will auto spam. Any idea? Thanks. X-Spam-Flag: YES X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on X-Spam-Level: * X-Spam-Status: Yes, score=5.9 required=5.0 tests=DNS_FROM_OPENWHOIS, FH_DATE_PAST_20XX,HTML_MESSAGE,RDNS_NONE autolearn=no version=3.2.

    Read the article

  • Iphone 2G error "USB Device Not Recognized" on Windows 7

    - by John Sean
    hey guys i have a big prob with my iphone... when i connect my iphone 2G to my PC, then i become an error "USB Device Not Recognized". So the PC does not recognize my iphone. what i have to do? I have reinstalled ITunes, but unfortunately the prob. is not resolved. I would be glad if you can help me. thanks a lot. warm regards!

    Read the article

  • Connecting to a remote server through OpenVPN when local network subnet conflicts with remote network's subnet

    - by John Russell
    After connecting to a remote location via OpenVPN, I am trying to access a server on a network that exists on a subnet such as 10.0.1.0/24. However, the network I am trying to access this remote server from is on the same subnet: 10.0.1.0/24. I am unable to connect to my remote server via typing in its IP because of this conflict. I am unable to even access the public internet while connected to the VPN. Does anyone know how to mitigate this issue? I have access to the OpenVPN Access Server.

    Read the article

  • Has anyone used the sharedband connection bonding product?

    - by John Rennie
    See http://www.sharedband.com/ for details on the product. Obviously Sharedband aren't too keen on giving away their technical secrets, but I would guess that it bonds the connections at the IP layer i.e. their routers send the IP packets to the SharedBand routers over all available lines and the ShareBand routers handle all the virtual circuitry and provide the NATing to whatever IP address(es) they've assigned you. It looks a clever idea, and a good way to provide some resilience over ADSL links. You can even use ADSL links from different ISPs and SharedBand will still bond them for you. But, I find myself wondering how well it really works, and whether it's worth it. The Draytek routers can already load balance (though not bond) up to four ADSL lines, so the SharedBand product really only offers an advantage if you're hosting servers i.e. you can have one IP address to accept incoming connections through all your (working) ADSL lines. But should you really try and host servers using ADSL lines, especially since ADSL upload performance isn't stellar? Wouldn't it be better to use a hosted server, or maybe pay up for a leased line with a SLA? So I'm asking if anyone is using SharedBand, and if so what do you think of it? JR

    Read the article

  • solaris zpool SSD cache device "faulted"

    - by John-ZFS
    I am trying to get over these SATA SSD errors - smartctl command failed to read the SATA SSD - SATA is not supported what could be the reason for errors? does this mean that SSD has reached EOL & needs to be replacement? errors: No known data errors pool: zpool1216 state: DEGRADED status: One or more devices are faulted in response to persistent errors. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Replace the faulted device, or use 'zpool clear' to mark the device repaired. scan: scrub repaired 0 in 0h24m with 0 errors on Fri May 18 14:31:08 2012 config: NAME STATE READ WRITE CKSUM zpool1216 DEGRADED 0 0 0 raidz1-0 ONLINE 0 0 0 c11t10d0 ONLINE 0 0 0 c11t11d0 ONLINE 0 0 0 c11t12d0 ONLINE 0 0 0 c11t13d0 ONLINE 0 0 0 c11t14d0 ONLINE 0 0 0 c11t15d0 ONLINE 0 0 0 c11t16d0 ONLINE 0 0 0 c11t1d0 ONLINE 0 0 0 c11t2d0 ONLINE 0 0 0 c11t3d0 ONLINE 0 0 0 c11t4d0 ONLINE 0 0 0 c11t5d0 ONLINE 0 0 0 c11t6d0 ONLINE 0 0 0 c11t7d0 ONLINE 0 0 0 c11t8d0 ONLINE 0 0 0 c11t9d0 ONLINE 0 0 0 logs c9d0 FAULTED 0 0 0 too many errors cache c10d0 FAULTED 0 17 0 too many errors

    Read the article

  • XDEBUG/PHP doesn't dump profile even when set up properly?

    - by John D.
    I installed xdebug from source, but also tried my package manager (separately) and they both are loaded correctly (verified by restarting Apache and seeing the xdebug copyright info in phpinfo()) but they do not dump profiling information. Out of the 40 different attempts of configuration it logged once or twice but I lost what I did, I tried with first only loading the module in php.ini with no settings, but it didn't log to /tmp/. I tried many different settings but my current is now: xdebug.profiler_enable = Off xdebug.profiler_enable_trigger = 1 xdebug.profiler_output_dir = "/tmp/" xdebug.profiler_output_name = "profiler.%t" Of course I call my script through 127.0.0.1/test.php?XDEBUG_PROFILE, which is for enable_trigger. Do you know why it would not dump profiler information? nobody (Arch Linux) can write to /tmp/ as it has before, so I'm sure it is not a permissions error. Apache's error_log does not tell me anything about xdebug either, as it has loaded correctly. It just does not "work"! EDIT: I made a subfolder "xdebug_profiles" in /tmp/ and chown'ed it to nobody, and now it works flawlessly. I'm not sure why it couldn't write before, I guess it's just a caveat with nobody on Arch. I answered my own question , not enough points to answer it or comment, so consider this answered.

    Read the article

  • Acer Aspire 1360 Recovery CDs

    - by John
    I have replaced a dead hard disk in an out of warranty Acer Apire 1360 laptop. The two recovery CDs I have dont appear to be bootable, they just contain .hdd and .ghs (image?) files. On the original broken hard drive there was a hidden partition which could be invoked by pressing alt+f10 when booting. You would then be prompted for the 2 recovery CDs to perform the restore. Obviously the new hard drive does not contain the hidden Acer recovery partition. This being the case, how do I go about restoring Win XP? The 2 CDs are called Aspire 1360/1520 Serires Recovery CD Disk 1 of 2 and 2 of 2. Am I missing a futher bootable recovery CD? Can anyone confirm how many restore CDs originally came with the laptop.

    Read the article

  • How to a2ensite and a2dissite?

    - by John
    I'm logged into a Linux server. I think it's a Red Hat distribution. The commands a2ensite and a2dissite are not available. In the /etc/httpd directory, I don't see any mention of sites-enabled or sites-available. I'm pretty sure the site is currently executing the directives of /etc/httpd/conf.d/ssl.conf . I would like to do a a2dissite ssl, then reload the Web Server. How to do achieve this ?

    Read the article

  • Tomcat cookies not working via my ProxyPass VirtualHost

    - by John
    Hi there. I'm having some issues with getting cookies to work when using a ProxyPass to redirect traffic on port 80 to a web-application hosted via Tomcat. My motivation for enabling cookies is to get rid of the "jsessionid=" parameter that is appended to the URLs. I've enabled cookies in my context.xml in META-INF/ for my web application. When I access the webapplication via http://url:8080/webapp it works as expected, the jsessionid parameter is not visible in the URL, instead it's stored in a cookie. When accessing my website via an apache2 virtualhost the cookies doesn't seem to work because now "jsessionid" is being appended to the URLs. How can I solve this issue? Here's my VHost configuration: <VirtualHost *:80 ServerName somedomain.no ServerAlias www.somedomain.no <Proxy * Order deny,allow Allow from all </Proxy ProxyPreserveHost Off ProxyPass / http://localhost:8080/webapp/ ProxyPassReverse / http://localhost:8080/webapp/ ErrorLog /var/log/apache2/somedomain.no.error.log CustomLog /var/log/apache2/somedomain.no.access.log combined </VirtualHost

    Read the article

  • SQLCMD not recogized despite install of SQL Server Native Client for SQL2008

    - by John Galt
    This little question is part of a much larger issue I am trying to resolve: Does SQLCMD require a separate install or is it included with the Microsoft SQL Server 2008 Native Client (which I just installed on my webserver). Maybe this is just an incorrect path issue. Here is what I tried: C:\>sqlcmd -S tcp:devmojito\mssqlserver2008,1433 'sqlcmd' is not recognized as an internal or external command, operable program or batch file. C:\> This same syntax works when executed from the c drive on my SQL Server machine.

    Read the article

  • Manage Upload Permissions, SFTP & Linux

    - by John R
    I'm new to Linux. I am working with a Redhat 5.5 server and am using a Java-based SFTP script that will allow multiple users to upload text files to a server. I am undecided if each user will have a separate directory or if I will use a naming convention that includes their customer ID. The files include some personal information about their LAN settings, so I prefer to use SFTP as apposed to FTP. It is my understanding that SFTP is encrypted (Also, I have a Java class configured to upload via SFTP, so I prefer not to switch protocols unless their is a very-good reason). The prototype is for a system that will support large numbers of customers and the thought of continually adding and removing clients through the command line seems highly impractical. (Again, I am new_to/learning Linux and Redhat). What are normal conventions for giving multiple users permission to SFTP upload files with a unique username and password for each.

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >