Search Results

Search found 7643 results on 306 pages for 'magic numbers'.

Page 53/306 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• Raid 5 mdadm Problem - Help Please

  - by user66260

  My Raid 5 array (4 1tb Disks WD10EARS) had was showing as degraded. I looked and one of the disks wasnt installed, so i re-added it with the mdadm add command. the array is now showing as (null)Array , but cant be mounted if i run: root@warren-P5K-E:/home/warren# sudo mdadm --misc --detail /dev/md0 I get: mdadm: cannot open /dev/md0: No such file or directory and running: root@warren-P5K-E:/home/warren# cat /proc/mdstat gives me: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] unused devices: < none > The data is very important root@warren-P5K-E:/home/warren# mdadm --examine /dev/sda /dev/sda: Magic : a92b4efc Version : 0.90.00 UUID : 00000000:00000000:00000000:00000000 Creation Time : Sat May 26 12:08:14 2012 Raid Level : -unknown- Raid Devices : 0 Total Devices : 4 Preferred Minor : 0 Update Time : Sat May 26 12:08:40 2012 State : active Active Devices : 0 Working Devices : 4 Failed Devices : 0 Spare Devices : 4 Checksum : 82d5b792 - correct Events : 1 Number Major Minor RaidDevice State this 1 8 0 1 spare /dev/sda 0 0 8 16 0 spare /dev/sdb 1 1 8 0 1 spare /dev/sda 2 2 8 32 2 spare /dev/sdc 3 3 8 48 3 spare /dev/sdd root@warren-P5K-E:/home/warren# mdadm --examine /dev/sdb /dev/sdb: Magic : a92b4efc Version : 0.90.00 UUID : 00000000:00000000:00000000:00000000 Creation Time : Sat May 26 12:08:14 2012 Raid Level : -unknown- Raid Devices : 0 Total Devices : 4 Preferred Minor : 0 Update Time : Sat May 26 12:08:40 2012 State : active Active Devices : 0 Working Devices : 4 Failed Devices : 0 Spare Devices : 4 Checksum : 82d5b7a0 - correct Events : 1 Number Major Minor RaidDevice State this 0 8 16 0 spare /dev/sdb 0 0 8 16 0 spare /dev/sdb 1 1 8 0 1 spare /dev/sda 2 2 8 32 2 spare /dev/sdc 3 3 8 48 3 spare /dev/sdd root@warren-P5K-E:/home/warren# oot@warren-P5K-E:/home/warren# mdadm --examine /dev/sdc /dev/sdc: Magic : a92b4efc Version : 0.90.00 UUID : 00000000:00000000:00000000:00000000 Creation Time : Sat May 26 12:08:14 2012 Raid Level : -unknown- Raid Devices : 0 Total Devices : 4 Preferred Minor : 0 Update Time : Sat May 26 12:08:40 2012 State : active Active Devices : 0 Working Devices : 4 Failed Devices : 0 Spare Devices : 4 Checksum : 82d5b7b4 - correct Events : 1 Number Major Minor RaidDevice State this 2 8 32 2 spare /dev/sdc 0 0 8 16 0 spare /dev/sdb 1 1 8 0 1 spare /dev/sda 2 2 8 32 2 spare /dev/sdc 3 3 8 48 3 spare /dev/sdd root@warren-P5K-E:/home/warren# mdadm --examine /dev/sdd /dev/sdd: Magic : a92b4efc Version : 0.90.00 UUID : 00000000:00000000:00000000:00000000 Creation Time : Sat May 26 12:08:14 2012 Raid Level : -unknown- Raid Devices : 0 Total Devices : 4 Preferred Minor : 0 Update Time : Sat May 26 12:08:40 2012 State : active Active Devices : 0 Working Devices : 4 Failed Devices : 0 Spare Devices : 4 Checksum : 82d5b7c6 - correct Events : 1 Number Major Minor RaidDevice State this 3 8 48 3 spare /dev/sdd 0 0 8 16 0 spare /dev/sdb 1 1 8 0 1 spare /dev/sda 2 2 8 32 2 spare /dev/sdc 3 3 8 48 3 spare /dev/sdd That on the 4 drives.

  Read the article

• Oracle Leader in Transportation Management

  - by John Murphy

  Oracle Named a Leader in the Transportation Management Systems Market by Leading Analyst Firm Redwood Shores, Calif. – October 15, 2012 News Facts Gartner, Inc. has placed Oracle Transportation Management in the Leaders Quadrant of its 2012 report, “Magic Quadrant for Transportation Management Systems (TMS).” (1) Gartner Magic Quadrants position vendors within a particular market segment based on their completeness of vision and ability to execute on that vision. According to the report, “Multiple subcomponents make up a comprehensive TMS across planning (for example, load consolidation, routing, mode selection and carrier selection) and execution (for example, tendering loads to carriers, shipment track and trace, and freight audit and payment).” Built on modern, flexible, Internet based architecture, Oracle Transportation Management is a global transportation and logistics operations system that allows companies to minimize cost, optimize service levels, support sustainability initiatives, and create flexible business process automation within their transportation and logistics networks. With a share of 26% of worldwide software revenue for 2011, Oracle is also number one in TMS vendor share according to Gartner’s report, “Market Trends: A Golden Opportunity in the Transportation Management System Market, 2012 – 2016.” (2) Supporting Quote “Shippers and logistics service providers face increasingly complex challenges as they try to reduce costs, secure capacity and improve overall freight efficiency,” said Derek Gittoes, vice president, logistics product strategy, Oracle. “We believe our high standing in both Gartner reports is a reflection of Oracle’s commitment to addressing these challenges by delivering the industry’s broadest and deepest transportation management platform. With a flexible and modern platform, we are able to support customers with both basic transportation needs, as well as those with highly complex logistics requirements.” Supporting Resources Magic Quadrant for Transportation Management Systems Market Trends: A Golden Opportunity in the Transportation Management System Market, 2012 – 2016 Oracle Transportation Management (1) Gartner, Inc., “Magic Quadrant for Transportation Management Systems,” by C. Dwight Klappich, August 23, 2012 (2) Gartner, Inc., “Market Trends: A Golden Opportunity in the Transportation Management System Market, 2012 – 2016,” by Chad Eschinger and C. Dwight Klappich, September 24, 2012. About Oracle Applications Over 65,000 customers worldwide rely on Oracle's complete, open and integrated enterprise applications to achieve superior results. Oracle provides a secure path for customers to benefit from the latest technology advances that improve the customer software experience and drive better business performance. Oracle Applications Unlimited is Oracle's commitment to customer choice through continuous investment and innovation in current applications offerings. Oracle's next-generation Fusion Applications build upon that commitment, and are designed to work with and evolve Oracle's Applications Unlimited offerings. Oracle's lifetime support policy helps ensure customers will continue to have a choice in upgrade paths, based on their enterprise needs. For more information on the latest Oracle Applications releases go towww.oracle.com/applications About Oracle Oracle engineers hardware and software to work together in the cloud and in your data center. For more information about Oracle (NASDAQ:ORCL), visit www.oracle.com. Trademarks Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. ###   Karen [email protected] Simon JonesBlanc & [email protected]

  Read the article

• SEO Copywriting - A Steady Diet of Steroids For Your Website

  What does it really take to get SEO working for you? If you are looking for the magic bullet it's not here since the magic bullet is you.

  Read the article

• New line and returns ignored in setMessageBody

  - by Magic Bullet Dave

  Am I doing something dumb? I can pre-fill and email ok but the "\r\n" is ignored in the emailBody: - (void) sendEventInEmail { MFMailComposeViewController *picker = [[MFMailComposeViewController alloc] init]; picker.mailComposeDelegate = self; NSString *emailSubject = [eventDictionary objectForKey:EVENT_NAME_KEY]; [picker setSubject:emailSubject]; // Fill out the email body text NSString *iTunesLink = @"http://itunes.apple.com/gb/app/whats-on-reading/id347859140?mt=8"; // Link to iTune App link NSString *content = [eventDictionary objectForKey:@"Description"]; NSString *emailBody = [NSString stringWithFormat:@"%@\r\nSent using <a href = '%@'>What's On Reading</a> for the iPhone.", content, iTunesLink]; [picker setMessageBody:emailBody isHTML:YES]; picker.navigationBar.barStyle = UIBarStyleBlack; [self presentModalViewController:picker animated:YES]; [picker release]; } Regards Dave

  Read the article

• Creating a UIImage from a rotated UIImageView...

  - by Magic Bullet Dave

  I have a UIImageView with an image in it. I have rotated the image prior to display by setting the transform property of the UIImageView to CGAffineTransformMakeRotation(angle) where angle is the angle in radians. I want to be able to create another UIImage that corresponds to the rotated version that I can see in my view. I am almost there, by rotating the image context I get a rotated image: - (UIImage *) rotatedImageFromImageView: (UIImageView *) imageView { UIImage *rotatedImage; // Get image width, height of the bonuding rectangle CGRect boundingRect = [self getBoundingRectAfterRotation: imageView.bounds byAngle:angle]; // Create a graphics context the size of the boundinf rectangle UIGraphicsBeginImageContext(boundingRect.size); CGContextRef context = UIGraphicsGetCurrentContext(); // Rotate and translate the context CGAffineTransform ourTransform = CGAffineTransformIdentity; ourTransform = CGAffineTransformConcat(ourTransform, CGAffineTransformMakeRotation(angle)); CGContextConcatCTM(context, ourTransform); // Draw the image into the context CGContextDrawImage(context, CGRectMake(0, 0, imageView.image.size.width, imageView.image.size.height), imageView.image.CGImage); // Get an image from the context rotatedImage = [UIImage imageWithCGImage: CGBitmapContextCreateImage(context)]; // Clean up UIGraphicsEndImageContext(); return rotatedImage; } However the image is not rotated about its centre. I have tried all kinds of transforms concatenated with my rotate to get it to rotate around the centre but to no avail. Am I missing a trick? Is this even possible since I am rotating the context not the image? Getting desperate to make this work now, so any help would be appreciated. Dave

  Read the article

• Nesting Linq-to-Objects query within Linq-to-Entities query –what is happening under the covers?

  - by carewithl

  var numbers = new int[] { 1, 2, 3, 4, 5 }; var contacts = from c in context.Contacts where c.ContactID == numbers.Max() | c.ContactID == numbers.FirstOrDefault() select c; foreach (var item in contacts) Console.WriteLine(item.ContactID); Linq-to-Entities query is first translated into Linq expression tree, which is then converted by Object Services into command tree. And if Linq-to-Entities query nests Linq-to-Objects query, then this nested query also gets translated into an expression tree. a) I assume none of the operators of the nested Linq-to-Objects query actually get executed, but instead data provider for particular DB (or perhaps Object Services) knows how to transform the logic of Linq-to-Objects operators into appropriate SQL statements? b) Data provider knows how to create equivalent SQL statements only for some of the Linq-to-Objects operators? c) Similarly, data provider knows how to create equivalent SQL statements only for some of the non-Linq methods in the Net Framework class library? EDIT: I know only some Sql so I can't be completely sure, but reading Sql query generated for the above code it seems data provider didn't actually execute numbers.Max method, but instead just somehow figured out that numbers.Max should return the maximum value and then proceed to include in generated Sql query a call to TSQL's build-in MAX function. It also put all the values held by numbers array into a Sql query. SELECT CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN '0X0X' ELSE '0X1X' END AS [C1], [Extent1].[ContactID] AS [ContactID], [Extent1].[FirstName] AS [FirstName], [Extent1].[LastName] AS [LastName], [Extent1].[Title] AS [Title], [Extent1].[AddDate] AS [AddDate], [Extent1].[ModifiedDate] AS [ModifiedDate], [Extent1].[RowVersion] AS [RowVersion], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[CustomerTypeID] END AS [C2], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[InitialDate] END AS [C3], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[PrimaryDesintation] END AS [C4], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[SecondaryDestination] END AS [C5], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[PrimaryActivity] END AS [C6], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[SecondaryActivity] END AS [C7], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[Notes] END AS [C8], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[RowVersion] END AS [C9], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[BirthDate] END AS [C10], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[HeightInches] END AS [C11], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[WeightPounds] END AS [C12], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[DietaryRestrictions] END AS [C13] FROM [dbo].[Contact] AS [Extent1] LEFT OUTER JOIN (SELECT [Extent2].[ContactID] AS [ContactID], [Extent2].[BirthDate] AS [BirthDate], [Extent2].[HeightInches] AS [HeightInches], [Extent2].[WeightPounds] AS [WeightPounds], [Extent2].[DietaryRestrictions] AS [DietaryRestrictions], [Extent3].[CustomerTypeID] AS [CustomerTypeID], [Extent3].[InitialDate] AS [InitialDate], [Extent3].[PrimaryDesintation] AS [PrimaryDesintation], [Extent3].[SecondaryDestination] AS [SecondaryDestination], [Extent3].[PrimaryActivity] AS [PrimaryActivity], [Extent3].[SecondaryActivity] AS [SecondaryActivity], [Extent3].[Notes] AS [Notes], [Extent3].[RowVersion] AS [RowVersion], cast(1 as bit) AS [C1] FROM [dbo].[ContactPersonalInfo] AS [Extent2] INNER JOIN [dbo].[Customers] AS [Extent3] ON [Extent2].[ContactID] = [Extent3].[ContactID]) AS [Project1] ON [Extent1].[ContactID] = [Project1].[ContactID] LEFT OUTER JOIN (SELECT TOP (1) [c].[C1] AS [C1] FROM (SELECT [UnionAll3].[C1] AS [C1] FROM (SELECT [UnionAll2].[C1] AS [C1] FROM (SELECT [UnionAll1].[C1] AS [C1] FROM (SELECT 1 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable1] UNION ALL SELECT 2 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable2]) AS [UnionAll1] UNION ALL SELECT 3 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable3]) AS [UnionAll2] UNION ALL SELECT 4 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable4]) AS [UnionAll3] UNION ALL SELECT 5 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable5]) AS [c]) AS [Limit1] ON 1 = 1 LEFT OUTER JOIN (SELECT TOP (1) [c].[C1] AS [C1] FROM (SELECT [UnionAll7].[C1] AS [C1] FROM (SELECT [UnionAll6].[C1] AS [C1] FROM (SELECT [UnionAll5].[C1] AS [C1] FROM (SELECT 1 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable6] UNION ALL SELECT 2 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable7]) AS [UnionAll5] UNION ALL SELECT 3 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable8]) AS [UnionAll6] UNION ALL SELECT 4 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable9]) AS [UnionAll7] UNION ALL SELECT 5 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable10]) AS [c]) AS [Limit2] ON 1 = 1 CROSS JOIN (SELECT MAX([UnionAll12].[C1]) AS [A1] FROM (SELECT [UnionAll11].[C1] AS [C1] FROM (SELECT [UnionAll10].[C1] AS [C1] FROM (SELECT [UnionAll9].[C1] AS [C1] FROM (SELECT 1 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable11] UNION ALL SELECT 2 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable12]) AS [UnionAll9] UNION ALL SELECT 3 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable13]) AS [UnionAll10] UNION ALL SELECT 4 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable14]) AS [UnionAll11] UNION ALL SELECT 5 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable15]) AS [UnionAll12]) AS [GroupBy1] WHERE [Extent1].[ContactID] IN ([GroupBy1].[A1], (CASE WHEN ([Limit1].[C1] IS NULL) THEN 0 ELSE [Limit2].[C1] END)) Based on this, is it possible that Linq2Entities provider indeed doesn't execute non-Linq and Linq-to-Object methods, but instead creates equivalent SQL statements for some of them ( and for others it throws an exception )? Thank you in advance

  Read the article

• Learning PostgreSql: old versions of rows are stored right in the table

  - by Alexander Kuznetsov

  PostgreSql features multi-version concurrency control aka MVCC. To implement MVCC, old versions of rows are stored right in the same table, and this is very different from what SQL Server does, and it leads to some very interesting consequences. Let us play with this thing a little bit, but first we need to set up some test data. Setting up. First of all, let us create a numbers table. Any production database must have it anyway: CREATE TABLE Numbers ( i INTEGER ); INSERT INTO Numbers ( i ) VALUES...(read more)

  Read the article

• How can you determine if a file exists within the app bundle?

  - by Magic Bullet Dave

  Sorry, dumb question number 2 today. Is it possible to determine if a file is contained within the App Bundle? I can access files no problem, i.e., NSString *pathAndFileName = [[NSBundle mainBundle] pathForResource:fileName ofType:@"plist"]; But can't figure out how to check if the file exists there in the first place. Regards Dave

  Read the article

• No method found compiler warning

  - by Magic Bullet Dave

  I have create a class from a string, check it is valid and then check if it responds to a particular method. If it does then I call the method. It all works fine, except I get an annoying compiler warning: "warning: no '-setCurrentID:' method found". Am I doing something wrong here? Is there anyway to tell the compiler all is ok and stop it reporting a warning? The here is the code: // Create an instance of the class id viewController = [[NSClassFromString(class) alloc] init]; // Check the class supports the methods to set the row and section if ([viewController respondsToSelector:@selector(setCurrentID:)]) { [viewController setCurrentID:itemID]; } // Push the view controller onto the tab bar stack [self.navigationController pushViewController:viewController animated:YES]; [viewController release]; Cheers Dave

  Read the article

• Loading files during run time

  - by NDraskovic

  I made a content pipeline extension (using this tutorial) in XNA 4.0 game. I altered some aspects, so it serves my need better, but the basic idea still applies. Now I want to go a step further and enable my game to be changed during run time. The file I am loading trough my content pipeline extension is very simple, it only contains decimal numbers, so I want to enable the user to change that file at will and reload it while the game is running (without recompiling as I had to do so far). This file is a very simplified version of level editor, meaning that it contains rows like: 1 1,5 1,78 -3,6 Here, the first number determines the object that will be drawn to the scene, and the other 3 numbers are coordinates where that object will be placed. So, how can I change the file that contains these numbers so that the game loads it and redraws the scene accordingly? Thanks

  Read the article

• Project Euler 4: (Iron)Python

  - by Ben Griswold

  In my attempt to learn (Iron)Python out in the open, here’s my solution for Project Euler Problem 4.  As always, any feedback is welcome. # Euler 4 # http://projecteuler.net/index.php?section=problems&id=4 # Find the largest palindrome made from the product of # two 3-digit numbers. A palindromic number reads the # same both ways. The largest palindrome made from the # product of two 2-digit numbers is 9009 = 91 x 99. # Find the largest palindrome made from the product of # two 3-digit numbers. import time start = time.time() def isPalindrome(s): return s == s[::-1] max = 0 for i in xrange(100, 999): for j in xrange(i, 999): n = i * j; if (isPalindrome(str(n))): if (n > max): max = n print max print "Elapsed Time:", (time.time() - start) * 1000, "millisecs" a=raw_input('Press return to continue')

  Read the article

• Creating a mask from a graphics context

  - by Magic Bullet Dave

  I want to be able to create a greyscale image with no alpha from a png in the app bundle. This works, and I get an image created: // Create graphics context the size of the overlapping rectangle UIGraphicsBeginImageContext(rectangleOfOverlap.size); CGContextRef ctx = UIGraphicsGetCurrentContext(); // More stuff CGContextDrawImage(ctx, drawRect2, [UIImage imageNamed:@"Image 01.png"].CGImage); // Create the new UIImage from the context UIImage *newImage = UIGraphicsGetImageFromCurrentImageContext(); However the resulting image is 32 bits per pixel and has an alpha channel, so when I use CGCreateImageWithMask it doesn't work. I've tried creating a bitmap context thus: CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceGray(); CGContextRef ctx =CGBitmapContextCreate(nil, rectangleOfOverlap.size.width, rectangleOfOverlap.size.height, 8, rectangleOfOverlap.size.width , colorSpace, kCGImageAlphaNone); UIGraphicsGetImageFromCurrentImageContext returns zero and the resulting image is not created. Am I doing something dumb here? Any help would be greatly appreciated. Regards Dave

  Read the article

• SIM card number swap

  - by DaGhostman Dimitrov

  Is it possible to swap two numbers between two sim cards (I am just got an new phone and it is using a micro sim) And I have a old number that I want to use but it is on standart sim card. Is it possible to swap the numbers between the cards using a SIM Card reader. What software and hardware should I use? Note: I have talked with my provider but I have to cancel my old numbers contract but I like it and do not want to pay the remaining period of the contract to turn it in to PayAsYouGo and then swap ..

  Read the article

• Very few visitors on Analytics: incorrect setting?

  - by Akaban

  it's quite a long time Analytics is making me crazy: I have a 2 years old website, started with Aruba (an Italian provider) and then transfered on Hostgator. It's a blog Wordpress + MyBB forum, and on both the platforms I've the Analytics code in the footer. The problem is that the stats on Analytics are simply ridiculous compared to the numbers reported by the Aruba (before) and Hostgator (then). I think that the numbers of Aruba/Hostgator are correct, simply because just the daily users connected on the forum is higher than the Analytics numbers. I know it's a really confused request, but maybe you can help me to understand what's the problem.

  Read the article

• What is the best approach to 2D collision detection on the iPhone?

  - by Magic Bullet Dave

  Been working on this problem of collision detection and there appears to be 3 main approaches I could take: Sprite and mask approach. (AND the overlap of the sprites and check for a non-zero number in the resulting sprite pixel data). Bounding circles, rectangles or polygons. (Create one or more shapes that enclose the sprites and do the basic maths to check for overlaps). Use an existing sprite library. The first approach, even though it would have been the way I would have done it in the old days of 16x16 sprite blocks, it appears that there just isn’t an easy way of getting at the individual image pixel data and/or alpha channel within Quartz (or OPENGL for that matter). Detecting the overlap of the bounding box is easy, but then creating a 3rd image from the overlap and then testing it for pixels is complicated and my gut feel is that even if we could get it to work would be slow. Am I missing something neat here? The second approach involves dividing up our sprites into several polygons and testing them for overlaps. The more polygons the more accurate the collision detection. The benefit is that it is fast, and can be accurate. The downside is it makes the sprite creation more complicated. i.e., we have to create the polygons for each sprite. For speed the best approach is to create a tree of polygons. The 3rd approach I’m not sure about as it involves buying code (or using an open source licence). I am not sure what the best library to use is or whether this would make life easier or give us a problem integrating this into our app. So in short I am favouring the polygon and tree approach and would appreciate you views on this before I go and write lots of code. Best regards Dave

  Read the article

• How to Route URL from one domain to another..

  - by Magic

  Hello, I am an C# ASP.NET developer. I am trying to route URL from one domain to another using Godaddy IIS Virtual dedicated server or Dedicated server. For example I have a website application called A_Application in my server. An example URL: www.myserver.com/A_Application/product/bear/?productid=1 or using pretty URL www.myserver.com/A_Application/product/bear/1 I would like to setup for my client to point to A_Application using his/her domain. My Client example URL will be: www.hisserver.com/product/bear/?productid=1 or using pretty URL www.hisserver.com/product/bear/1 Thanks!

  Read the article

• Using the contents of an array to set individual pixels in a Quartz bitmap context

  - by Magic Bullet Dave

  I have an array that contains the RGB colour values for each pixel in a 320 x 180 display. I would like to be able to set individual pixel values in the a bitmap context of the same size offscreen then display the bitmap context in a view. It appears that I have to create 1x1 rects and either put a stroke on them or a line of length 1 at the point in question. Is that correct? I'm looking for a very efficient way of getting the array data onto the graphics context as you can imagine this is going to be an image buffer that cycles at 25 frames per second and drawing in this way seems inefficient. I guess the other question is should I use OPENGL ES instead? Thoughts/best practice would be much appreciated. Regards Dave OK, have come a short way, but can't make the final hurdle and I am not sure why this isn't working: - (void) displayContentsOfArray1UsingBitmap: (CGContextRef)context { long bitmapData[WIDTH * HEIGHT]; // Build bitmap int i, j, h; for (i = 0; i < WIDTH; i++) { for (j = 0; j < HEIGHT; j++) { h = frameBuffer01[i][j]; bitmapData[i * j] = h; } } // Blit the bitmap to the context CGDataProviderRef providerRef = CGDataProviderCreateWithData(NULL, bitmapData,4 * WIDTH * HEIGHT, NULL); CGColorSpaceRef colorSpaceRef = CGColorSpaceCreateDeviceRGB(); CGImageRef imageRef = CGImageCreate(WIDTH, HEIGHT, 8, 32, WIDTH * 4, colorSpaceRef, kCGImageAlphaFirst, providerRef, NULL, YES, kCGRenderingIntentDefault); CGContextDrawImage(context, CGRectMake(0.0, HEIGHT, WIDTH, HEIGHT), imageRef); CGImageRelease(imageRef); CGColorSpaceRelease(colorSpaceRef); CGDataProviderRelease(providerRef); }

  Read the article

• IOS4 UISplitViewController in Portrait Orientation with RootViewController showing like Landscape

  - by magic-c0d3r

  In IOS 3.2 I was able to display my UISplitViewController side by side like in landscape mode. In IOS 4.2 the RootViewController (MasterView) is not showing up in portrait mode. Does anyone know if we need to display the rootviewcontroll in a popover? Can we display it side by side like how it is in landscape mode? I want to avoid having to click on a button to show the masterview (when in portrait mode)

  Read the article

• iPhone 4.0 Screen Resolution and writing robust code...

  - by Magic Bullet Dave

  Does anyone know what will happen with existing apps when they run on the iPhone 4.0 in terms of the new screen resolution? I am assuming, just like developing for the iPad that there should be no hard coded screen resolutions in your code. I'd also like advice on the best way of writing robust code to work well on any device. For instance, detecting the screen resolution is not enough - on the iPad the screen is physically bigger so you can display more items on it. On the new iPhone the screen is the same physical size but higher resolution, so the likely thing is that you wont want to display more items, just higher resolution versions of them. Any help would be useful, Regards Dave EDIT: I have read the other similar posts, I guess what I really would like to know is what is the recommended way to write code for all App Store devices in a robust way so they a) all work b) make best use of the device.

  Read the article

• OpenGL ES, orthopgraphics projection and viewport

  - by DarkDeny

  I want to make some simple 2D game on iOS to familiarize myself with OpenGL ES. I started with Ray Wenderlich tutorial (How To Create A Simple 2D iPhone Game with OpenGL ES 2.0 and GLKit). That tutorial is quite good, but I miss some parts of a puzzle. Ray creates orthographic projection using some magic numbers like 480 and 320. It is not clear to me why did he take these numbers, and as far as I can see - sprite is not mapped to the ipad simulator screen one-to-one pixel. I tried to play with parameters with which ortho matrix is created, but I cannot figure out what math is here. How can I calculate numbers (bottom, top, left, right, close, far) which will be parameters to orthographic projection matrix creation and have sprite on the screen shown in its original size?

  Read the article

• Replaceable parameter syntax meaning

  - by Alexander N.

  Replaceable parameter syntax for the console object in C#. I am taking the O'Reilly C# Course 1 and it is asking for a replaceable parameter syntax and it is not very clear on what that means. Currently I used this: double trouble = 99999.0009; double bubble = 11111.0001; Console.WriteLine(trouble * bubble); Am I missing the meaning of replaceable parameter syntax? Can someone provide an example for what I am looking for? Original question for the quiz: "Create two variables, both doubles, assign them numbers greater than 10,000, and include a decimal component. Output the result of multiplying the numbers together, but use replaceable parameter syntax of the Console object, and multiply the numbers within the call to the Console.WriteLine() method."

  Read the article

• UILabel to render partial character using clip

  - by magic-c0d3r

  I want a UILabel to render a partial character by setting the lineBreakMode to clip. But it is clipping the entire character. Is there a different way to clip a word so that only partial character is displayed? Lets say I have a string like: "Hello Word" and that string is in a myLabel with a width that only fits the 5 characters and part of the "W" I want it still to render part of the "W" and not drop it from the render.

  Read the article

• Removing a UIView from its superView and expanding its frame to full screen

  - by Magic Bullet Dave

  I have an object that is a subclass of UIView that can be added to a view hierarchy as a subView. I want to be able to remove the UIView from its superView and add it as a subView of the main window and then expand to full screen. Something along the lines of: // Remove from superView and add to mainWindow [self retain]; [self removeFromSuperView]; [self addSubView:mainWindow]; // Animate to full screen [UIView beginAnimations:@"expandToFullScreen" context:nil]; [UIView setAnimationDuration:1.0]; self.frame = [[UIScreen mainScreen] applicationFrame]; [UIView commitAnimations]; [self release]; Firstly am I on the right lines? Secondly, is there an easily way for the object to get a pointer to the mainWindow? Thanks Dave

  Read the article

• Perl parsing ps fwaux output

  - by Magic Hat

  I am trying to figure out children processes of a given parent from ps fwaux (there may very well be a better way to do this). Basically, I have daemons running that may or may not have a child process running at any given time. In another script I want to check if there are any child processes, and if so do something. If not, error out. ps fwaux|grep will show me the tree, but I'm not exactly sure what to do with it. Any suggestions would be great.

  Read the article

• How to log kernel panics without KVM

  - by Spacedust

  My server is crashing and I can't find an answer why. It all started after my datacenter upgrade RAM from 16 GB to 32 GB. I also found such logs in dmesg - they've started to show itself just before the first kernel panic: EXT4-fs error (device md2): ext4_ext_find_extent: bad header/extent in inode #97911179: invalid magic - magic 5f69, entries 28769, max 26988(0), depth 24939(0) EXT4-fs error (device md2): ext4_ext_remove_space: bad header/extent in inode #97911179: invalid magic - magic 5f69, entries 28769, max 26988(0), depth 24939(0) EXT4-fs error (device md2): ext4_mb_generate_buddy: EXT4-fs: group 20974: 8589 blocks in bitmap, 54896 in gd JBD: Spotted dirty metadata buffer (dev = md2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. EXT4-fs error (device md2): ext4_ext_split: inode #97911179: (comm pdflush) eh_entries 28769 != eh_max 26988! EXT4-fs (md2): delayed block allocation failed for inode 97911179 at logical offset 1039 with max blocks 1 with error -5 This should not happen!! Data will be lost EXT4-fs error (device md2): ext4_mb_generate_buddy: EXT4-fs: group 21731: 5 blocks in bitmap, 60762 in gd JBD: Spotted dirty metadata buffer (dev = md2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. My system is CentOS 5.8 64-bit with latest kernel 2.6.18-308.20.1.el5. How can I check what is the reason of kernel panic without having an access to the KVM ? I have told my datacenter admins to check the memory in the server.

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >