Search Results

Search found 6516 results on 261 pages for 'sanal ms'.

Page 53/261 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

  • Office 2007 Installer Not Logging When Run During Startup Script

    - by bshacklett
    I'm using a startup script to deploy Microsoft Office 2007 Standard. It's not working quite right and I'm trying to find logging information for it. Unfortunately, no log is being generated by setup. I've tried configuring the log at %temp%\, C:\, %systemroot%\temp and leaving it at defaults, all to no avail. Nothing is showing up in the event logs, either. Is there anywhere else I can go to look for information on what's going on with the installer?

    Read the article

  • What are the replacement options for an IDE hard disk for a DOS based system?

    - by dummzeuch
    I have got a few "embedded" systems running MSDOS 6.2 which boot from and store data to IDE hard disks. Since these drives are nearing their end of life, the question arises how we can replace them. The requirements are: DOS must be able to install and boot from these drives. They must be able to sustain heavy (mostly) write access. If possible, they should be able to survive moderate vibrations (not too bad since the current hard disks have survived several years of that) I considered the following options so far: other ide hard drives: Unfortunately modern IDE drives are too large so DOS cannot boot from them even if I create small partitions. Older IDE drives are just that: old, so they are probably not the most reliable ones any more. SSDs: There are a few SSDs with IDE interface available. I have not yet tried them. Does anybody have any experience with them? They look like the ideal replacement provided that DOS can boot from them and that writing speed does not deteriorate too much (the old hard disks are no race cars either). Compact Flash: There are adapters for using CF with IDE controllers and they work fine. DOS can boot from them and they have no problems at all with vibrations. What I am not sure about is their durability. DOS uses FAT so some very few sectors are written every time the medium is being written to. IDE to SATA converters: I have no idea whether they are any good. Has anybody tried them? It might be an option to use one of these to connect an SATA SSD to the system. Are there any alternatives that I have missed? (We are working on replacing these systems, but it will still take a few years.)

    Read the article

  • Double Click to open Office docs is slow, File -> Open is fast.

    - by Keith
    I have 2 unique networks. They both share similar architecture: Windows 2003 SBS SP2 Running Symantec Endpoint Running Symantec Information Foundation Shared drives off a data partition Clients running Office 2003 or 2007 Connect to file server through mapped drives When users try to open a file from their local PC by double clicking, it will take 30-60 seconds to open. When they do File - Open, those same documents open up almost immediately. So far I've tried the following - CCleaner to parse the registry of outdated mapped drives - Disabled "using DDE" - Disabled A/V - Reboot Any ideas beyond that? Figured this question belongs here instead of SU since its the same issue on different networks.

    Read the article

  • Upgrade Vista Home Premium to Windows 7 Home Premium - will I lose recorded TV?

    - by Lunatik
    I'm seriously considering upgrading to Windows 7 on release, especially now that the UK price for doing so is actually reasonable for once, but am worried about losing the ~600GB of TV that I have recorded. AFAIK the recording format changed from the RTM Vista code when the TV Pack (Fiji?) was introduced to OEMs a while back and it is not possible to convert existing recordings to the new format. I'm assuming that 7 builds on the TV Pack code, so will upgrading lose me all my recorded TV?

    Read the article

  • Variable Assignment for arguments with a for loop

    - by RainbowDashDC
    Alright, so, I've searched quite a bit on how to do this but I've given up as I simply couldn't find anything. So, I have a code (below); it's main purpose is to get 9 arguments and assign them as a variable-- ignore the echo's and pipping. My question is: How can I simplfy this with a for loop or such so it doesn't take as much code, and if possible, have more than 9 arguments aswell set pkg1=%1 set pkg2=%2 set pkg3=%3 set pkg4=%4 set pkg5=%5 set pkg6=%6 set pkg7=%7 set pkg8=%8 set pkg9=%9 IF DEFINED pkg1 (echo %1.ini 1> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg2 (echo %2.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg3 (echo %3.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg4 (echo %4.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg5 (echo %5.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg6 (echo %6.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg7 (echo %7.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg8 (echo %8.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg9 (echo %9.ini 1>> %WINGET_TEMP%\args.rdc 2>nul)

    Read the article

  • Recent DDE / file open issue with Office 2007 affecting only a few machines, is a Windows Update to blame?

    - by kafka
    All our workstations run Windows 7 Professional 64 bit. It started with one, then another, then another couple of machines having a problem accessing Word files locally and on the network. This doesn't happen on my machine though. Affected users get the error message 'There was a problem sending the command to the program'. I've Googled for solutions, but none of the answers worked. They suggested deleting certain registry keys; unregistering and reregistering the program for DDE; resetting the way that the shell opens .docx programs etc. each to no avail. As it affects local and network shares I believe the problem lies with the clients, and not the server, and I'm starting to suspect that there could have been a recent Windows Update which has caused this. I've tried comparing the updates on my working machine with an affected machine, but I can't immediately see any major differences. Has anyone else recently encountered this problem? What are the best steps to take to further isolate what could be causing this?

    Read the article

  • quickly close all word and excel

    - by dyenatha
    Suppose I open 10 Word files and 10 Excel files and make no changes, how do I quickly taskkill all at once? Because I must repeat several attempts to replicate race, I'm hoping for a command-line solution. I'm willing to try PowerShell and cygwin (1.5) if necessary. The OS is Windows XP SP3 with current patches (still IE7). I tried "taskkill /pid 1 /pid 2 /t" where 1 is PID of EXCEL.EXE and 2 is PID of WINWORD.EXE, but it closed only 1 window of each program. I'm trying to replicate a race where an add-in for Microsoft Office 2007 fails to exclusive-lock one of its own files, which caused the 2nd Office program to stop exiting with a warning: System.IO.IOException: The process cannot access the file 'C:\Documents and Settings\me\Application Data\ExpensiveProduct\Add-InForMicrosoftOffice\4.2\egcred' because it is being used by another process. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options) at System.IO.StreamWriter.CreateFile(String path, Boolean append) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding) at System.IO.File.WriteAllText(String path, String contents, Encoding encoding) at ExpensiveProduct.EG.DataAccess.Credentials.CredentialManager.SaveUserTable() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.WordAddin.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.OfficeAddinBase.OnHostShutdown() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Unload(ext_DisconnectMode mode)

    Read the article

  • How to bypass Forefront TMG for downloading from Adobe Cloud

    - by user1006272
    I hope that this question has not been asked as I've spent a couple of days googling around trying to find a solution. I have one computer that needs to download from Adobe Cloud to install applications like Photoshop etc... The issue I'm having is that Adobe uses a download manager program (AdobeApplicationManager.exe) that just keeps incrementing the time left on the download of any app like Photoshop. Is there a way to allow just the download manager from that one computer to bypass any filtering settings in Forefront TMG 2010? I have very little knowledge of servers / ISA servers / Forefront TMG and have been thrown into this position by luck I guess. Any help with this would be highly appreciated. Thanks in advance.

    Read the article

  • Office 2010 OCT Outlook Filepaths

    - by vlannoob
    I'm playing around with customizing Office 2010 installs on my network, normally I just do a full manual install, but as the environment grows and the lazier I get its becoming a pain to do it manually every time. I've read up and downloaded the Office 2010 OCT tool and it looks relatively straight forward - with one exception - the Outlook Profile. I can 'get around it' by just leaving it all as default (or not enabling offline use) but I'd like to customise it slightly so that its all setup no matter who logs onto the PC. The only issue I have, and my question is: In the OCT - Outlook section What do you enter into the Path and Filename for the OST file and the Offline Address book seetings under Enable Offline Use section? I'm sweet with everything else - just that one section, and I think if I bugger that one it will kill the whole Outlook Profile?? It would need to go into each users unique filepath for their profile correct? I have a fair idea of what should be there but I'm struggling with the correct syntax. I know this is a stupid question....but its late in the day and my brain is fried ;) As usual - any and all help/assistance is appreciated ;)

    Read the article

  • Windows 7 hangs with 100% disk activity but only when online

    - by jeremy
    I have the same problem as seemingly many other people here, and I think we might all be experiencing the same issue: a compatibility issue in Windows 7 between hard drive and network controller or drivers. I've tried firmware updates of my entire board, wiping my drive and reinstalling from scratch. And yet the problem persists, which suggests it is an operating system error, as the hard drive checks out 100% physically. Additionally, the only time it does not occur is when in safe mode WITHOUT networking. With networking, there are spikes in disc access every so often and a huge flow of processes accessing the disc simultaneously that literally "stick" the disc, and physically jolting my computer unsticks it. Again, this has been tested for hours in a professional service environment, and without network access on, things are fine. As soon as there's network access available, the disc access occasionally cranks up to 100% and sticks everything. I'm using Microsoft Security Essentials, but this also happened under Norton, then McAfee. Again, this happened again after a complete wipe, so the likelihood of malware causing it seems low. I don't visit unsecure sites anyway, as far as I know. This, to me, narrows it down to a Windows 7 process that is somehow repeatedly corrupted, perhaps a corrupt .dll or driver, causing a conflict at the operating system level and temporary hard drive failure. I would encourage anyone who knows more about this stuff (which is probably most people!) to take a shot at this one, and I would encourage anyone else with a sticking hard drive in windows 7 64-bit to check on whether it occurs during safe mode without networking.

    Read the article

  • Belarc Advisor (Store Passwords using Reversible Encryption)

    - by Steve
    Hi, I'm using Belarc Advisor to examine my PC. Part of BA is a security benchmark summary, which examines components of windows security and provides a benchmark rating. Two items are marked as Fail: - Store Passwords using Reversible Encryption - Password History Size I have opened the Local Security Settings tool from the Control Panel Administrative Tools, and ensured that the "Store passwords using reversible encryption" setting is enabled. Also, I've set the password history to a number. So I'm a bit miffed about the Fail marks. Any idea why the Fail marks appear? Any clues how I can Pass them? Thanks, Steve.

    Read the article

  • Trouble Downloading from some sites

    - by Fletch
    I am trying to download the new Microsoft Security Essentials but when I click on the Download button instead of getting the Download box popup nothing comes up. The progess bar at the bottom shows it doing something then when it reaches 100% nada. I can down load from HP (Drivers) and sites like Majorgeeks with no problem. I also have this problem on the Adobe download page when trying to get the shockwave and flash player. I am fixing my Granddaughters laptop that she got from someone else. There were over 26 Trojans listed on it when I installed AVG and they would not go away. I used CCleaner and HiJack This and deleted everything I could and wiped the freespace. Then ran AVG again and this time after finding a few Trojans and deleting them the system was reported as clean. IE8 then would not connect to the net so I used my computer to DL a copy and put it on the laptop, after that I was able to use the laptop to connect to the net and download a driver to get the sound working again. Laptop HP dv4000 XP Pro

    Read the article

  • Is it possible to run an old 16-bit DOS application under Windows 7 64-bit? [closed]

    - by NFX
    Possible Duplicate: Why 64 bit OS can't run a 16 bit application? How do I get 16-bit programs to work on a 64-bit Windows? Here at work my new development machine is Windows 7 64-bit (so I can use extra memory and run VMs). However I have a dilemma: it appears that 16-bit DOS programs do not run under Windows 7 64-bit. I have an old legacy program written in Clipper that I need to run periodically. I cannot access the compatibility setting as Windows 7 just greys them out.

    Read the article

  • Administrator can run a application but produces error while a administrator previllaged user can run without error

    - by tough
    I have an application which can run as admin prevailed user without error but while administrator runs it it produces error. The input string was not in correct format-application error. I tried to figure it out but not possible, since most of the people are looking for admin privilege to run it, me looking why can't a admin run the program without errors? The program is related to mssql-2008 r2. The SQL log-in settings are same for both the users.

    Read the article

  • Quickly close all Word and Excel instances?

    - by dyenatha
    Suppose I open 10 Word files and 10 Excel files and make no changes, how do I quickly taskkill all at once? Because I must repeat several attempts to replicate race, I'm hoping for a command-line solution. I'm willing to try PowerShell and cygwin (1.5) if necessary. The OS is Windows XP SP3 with current patches (still IE7). I tried "taskkill /pid 1 /pid 2 /t" where 1 is PID of EXCEL.EXE and 2 is PID of WINWORD.EXE, but it closed only 1 window of each program. I'm trying to replicate a race where an add-in for Microsoft Office 2007 fails to exclusive-lock one of its own files, which caused the 2nd Office program to stop exiting with a warning: System.IO.IOException: The process cannot access the file 'C:\Documents and Settings\me\Application Data\ExpensiveProduct\Add-InForMicrosoftOffice\4.2\egcred' because it is being used by another process. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options) at System.IO.StreamWriter.CreateFile(String path, Boolean append) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding) at System.IO.File.WriteAllText(String path, String contents, Encoding encoding) at ExpensiveProduct.EG.DataAccess.Credentials.CredentialManager.SaveUserTable() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.WordAddin.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.OfficeAddinBase.OnHostShutdown() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Unload(ext_DisconnectMode mode)

    Read the article

  • Syntax error on running a batch file to replace files

    - by Ralph
    I have a batch file intended to replace all instances of tracking.js within a folder/sub folders. FOR /R "D:\Virtual Servers (Testing)\CourseWare Master\Shared\Jenison\Version1.2\" %%I IN (tracking.js*) DO COPY /Y "D:\Virtual Servers (Testing)\CourseWare Master\Shared\Jenison\tracking.js" %%~fI When this is run I get the following syntax error C:COPY /Y "D:\Virtual Servers (Testing)\CourseWare Master\Shared\Jenison\track ing.js" D:\Virtual Servers (Testing)\CourseWare Master\Shared\Jenison\Version1.2 \SHAPERS_COMBINED\Smarter Communications\WhatisInfluencing\script\Tracking.js The syntax of the command is incorrect. Ideas please?

    Read the article

  • Migrating Gmail to Office 365

    - by user218699
    Good Morning, I have been setting up Office 365 for my organization. We are currently using Gmail. I have synced our local Active Directory server w/ Office 365, as well as our domains. The problem I am having has to do with migrating mailboxes from Gmail to Office 365. I have been using this article to walk me through the process: http://technet.microsoft.com/en-us/library/dn568114.aspx The issue arises when I begin to sync the mailboxes. Currently I have been trying to sync my own mailbox as a test. The synchronization process has been going on for about 15 hours (for just one mailbox) with no errors or any information given by Office 365, other than the "Syncing" status on the migration page in the Exchange Admin Center. Is syncing a single mailbox supposed to take this long, or have I missed a step? Thanks!

    Read the article

  • Set source address to use tun device does not work (Debian Squeeze)

    - by A. Donda
    there have been similar questions on StackExchange but none of the answers helped me, so I'll try a question of my own. I have a VPN connection via OpenVPN. By default, all traffic is redirected through the tunnel using OpenVPN's "two more specific routes" trick, but I disabled that. My routing table is like this: 198.144.156.141 192.168.2.1 255.255.255.255 UGH 0 0 0 eth0 10.30.92.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun1 10.30.92.1 10.30.92.5 255.255.255.255 UGH 0 0 0 tun1 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 10.30.92.5 0.0.0.0 UG 0 0 0 tun1 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 eth0 And the interface configuration is like this: # ifconfig eth0 Link encap:Ethernet HWaddr XX-XX- inet addr:192.168.2.100 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fe8d:acbd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:394869 errors:0 dropped:0 overruns:0 frame:0 TX packets:293489 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:388519578 (370.5 MiB) TX bytes:148817487 (141.9 MiB) Interrupt:20 Base address:0x6f00 tun1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.30.92.6 P-t-P:10.30.92.5 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:64 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:9885 (9.6 KiB) TX bytes:4380 (4.2 KiB) plus the lo device. The routing table has two default routes, one via eth0 through my local network router (DSL modem) at 192.168.2.1, and another via tun1 through the VPN's gateway. With this configuration, if I connect to a site, the route chosen is the direct one (because it has less hops?): # traceroute 8.8.8.8 -n traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 192.168.2.1 0.427 ms 0.491 ms 0.610 ms 2 213.191.89.13 17.981 ms 20.137 ms 22.141 ms 3 62.109.108.48 23.681 ms 25.009 ms 26.401 ms ... This is fine, because my goal is to send only traffic from specific applications through the tunnel (esp. transmission, using its -i / bind-address-ipv4 option). To test whether this can work at all, I check it first with traceroute's -s option: # traceroute 8.8.8.8 -n -s 10.30.92.6 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 * * * 2 * * * 3 * * * ... This I take to mean that connection using the tunnel's local address as source is not possible. What is possible (though only as root) is to specify the source interface: # traceroute 8.8.8.8 -n -i tun1 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 10.30.92.1 129.337 ms 297.758 ms 297.725 ms 2 * * * 3 198.144.152.17 297.653 ms 297.652 ms 297.650 ms ... So apparently the tun1 interface is working and it is possible to send packets through it. But selecting the source interface is not implemented in my actual target application (transmission), so I would like to get source address selection to work. What am I doing wrong?

    Read the article

  • Is there any way to synchronize AD users with Office 365 but still be able to edit them online?

    - by Massimo
    I'm performing a migration to Office 365 from a third-party mail server (MDaemon); the local Active Directory doesn't include any Exchange server, and never had any. We will need directory synchronization in order to enable users to log on to Office 365 using their domain credentials; but it seems that as soon as you enable directory synchronization, you can't perform any action anymore on Office 365 users: all changes need to be made on the local Active Directory, and then replicated by the synchronization process. For ordinary users with a single e-mail address and standard features, this is not a big problem; but what about users which need an additional address? What if I need to configure some nonstandard setting, like "hide from address list" or a custom mailbox quota? From what I've gathered, the only supported way to do this, as you can't directly edit Office 365 objects anymore after synchronization is enabled, is to extend the local AD schema with Exchange attributes, and then manually edit them (!). Or, you can install at least one local Exchange server, and then use the Exchange administrative tools to configure the required settings. Is this correct or am I missing something? Is there any way to synchronize user accounts and password, but still be able to edit user settings directly in Office 365? If not (everything really needs to be set locally and then synchronized), is there any simpler way to do this than manually editing LDAP attributes or installing a local Exchange server?

    Read the article

  • Office documents on intranet all requiring second login and can't pass auth? Disable webdav?

    - by DOTang
    I am not sure what is going on, but recently all the Office documents on our intranet get prompted a second time for login and according to the error logs it looks like it's trying to use webdav to open (an editable?) version of the document to save directly on the server? We have no sharepoint server setup or anything, but this shouldn't be happening. All I want is for the document to be saved or opened from a local copy in temp like normal. Here is the log: Line 57499: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57500: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57501: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 The log basically contains a bunch of these. How can I disable this behavior so that office documents that are downloaded aren't attempted to be used through webdav?? Edit: I should clarify behavior, it asks if you want to save or open it, upon choosing open open, it asks to re-authenicate, you put in the user information and the login box comes up 3 times acting like you entered the wrong password. For some users, after passing the login box the third time, it still opens up, for others their browser just locks up. It also doesn't even look like webdav is installed on our server, I see no config options in IIS for it as outlined on this page: http://learn.iis.net/page.aspx/350/installing-and-configuring-webdav-on-iis-7/#001

    Read the article

  • What is the most reliable way to copy access front end files to client PCs

    - by Funky Si
    I have several in house databases which have access 2003 front ends, either adp or ade files. I need to copy these from my server to every client machine. In the past I have used a rollout scripts to copy the files to the all users desktop folder. I have since adapted this to also copy files to the public desktop folder since we started having windows 7 client machines as well as XP. The problem is that some of the time these scripts don't work for windows 7. Is there a better way of copying these files to a mix of windows 7 and XP clients or is using rollout scripts the best way?

    Read the article

  • Office 2010 & Windows 7 - 'File' is currently in use. Try again later

    - by thing2k
    The issue: when saving a document from either Word, Excel or PowerPoint 2010, every so often it will show the message 'file' is currently in use. Try again later. We started our rollout of Windows 7 beginning of this year, and this issue was infrequent, but is now affecting enough people to be a problem. Usually, if you clear the alert, then save again, it works fine, though only in Word or Excel. Annoyingly, PowerPoint has a bad habit of changing the file to read-only after the error. So the only choice is to save to a new file name. The issue seems to only happen to files in the user's My Documents, which is a redirection folder from their HomeShare. The HomeShares are spread across 3 different file servers, 2 Windows 2003 and 1 Windows 2008 R2. Has anyone seen this issue and know how to fix it?

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >