Search Results

Search found 44141 results on 1766 pages for 'unix development support'.

Page 530/1766 | < Previous Page | 526 527 528 529 530 531 532 533 534 535 536 537  | Next Page >

• Speeding up procedural texture generation

  - by FalconNL

  Recently I've begun working on a game that takes place in a procedurally generated solar system. After a bit of a learning curve (having neither worked with Scala, OpenGL 2 ES or Libgdx before), I have a basic tech demo going where you spin around a single procedurally textured planet: The problem I'm running into is the performance of the texture generation. A quick overview of what I'm doing: a planet is a cube that has been deformed to a sphere. To each side, a n x n (e.g. 256 x 256) texture is applied, which are bundled in one 8n x n texture that is sent to the fragment shader. The last two spaces are not used, they're only there to make sure the width is a power of 2. The texture is currently generated on the CPU, using the updated 2012 version of the simplex noise algorithm linked to in the paper 'Simplex noise demystified'. The scene I'm using to test the algorithm contains two spheres: the planet and the background. Both use a greyscale texture consisting of six octaves of 3D simplex noise, so for example if we choose 128x128 as the texture size there are 128 x 128 x 6 x 2 x 6 = about 1.2 million calls to the noise function. The closest you will get to the planet is about what's shown in the screenshot and since the game's target resolution is 1280x720 that means I'd prefer to use 512x512 textures. Combine that with the fact the actual textures will of course be more complicated than basic noise (There will be a day and night texture, blended in the fragment shader based on sunlight, and a specular mask. I need noise for continents, terrain color variation, clouds, city lights, etc.) and we're looking at something like 512 x 512 x 6 x 3 x 15 = 70 million noise calls for the planet alone. In the final game, there will be activities when traveling between planets, so a wait of 5 or 10 seconds, possibly 20, would be acceptable since I can calculate the texture in the background while traveling, though obviously the faster the better. Getting back to our test scene, performance on my PC isn't too terrible, though still too slow considering the final result is going to be about 60 times worse: 128x128 : 0.1s 256x256 : 0.4s 512x512 : 1.7s This is after I moved all performance-critical code to Java, since trying to do so in Scala was a lot worse. Running this on my phone (a Samsung Galaxy S3), however, produces a more problematic result: 128x128 : 2s 256x256 : 7s 512x512 : 29s Already far too long, and that's not even factoring in the fact that it'll be minutes instead of seconds in the final version. Clearly something needs to be done. Personally, I see a few potential avenues, though I'm not particularly keen on any of them yet: Don't precalculate the textures, but let the fragment shader calculate everything. Probably not feasible, because at one point I had the background as a fullscreen quad with a pixel shader and I got about 1 fps on my phone. Use the GPU to render the texture once, store it and use the stored texture from then on. Upside: might be faster than doing it on the CPU since the GPU is supposed to be faster at floating point calculations. Downside: effects that cannot (easily) be expressed as functions of simplex noise (e.g. gas planet vortices, moon craters, etc.) are a lot more difficult to code in GLSL than in Scala/Java. Calculate a large amount of noise textures and ship them with the application. I'd like to avoid this if at all possible. Lower the resolution. Buys me a 4x performance gain, which isn't really enough plus I lose a lot of quality. Find a faster noise algorithm. If anyone has one I'm all ears, but simplex is already supposed to be faster than perlin. Adopt a pixel art style, allowing for lower resolution textures and fewer noise octaves. While I originally envisioned the game in this style, I've come to prefer the realistic approach. I'm doing something wrong and the performance should already be one or two orders of magnitude better. If this is the case, please let me know. If anyone has any suggestions, tips, workarounds, or other comments regarding this problem I'd love to hear them.

  Read the article

• problem with loading in .FBX meshes in DirectX 10

  - by N0xus

  I'm trying to load in meshes into DirectX 10. I've created a bunch of classes that handle it and allow me to call in a mesh with only a single line of code in my main game class. How ever, when I run the program this is what renders: In the debug output window the following errors keep appearing: D3D10: ERROR: ID3D10Device::DrawIndexed: Input Assembler - Vertex Shader linkage error: Signatures between stages are incompatible. The reason is that Semantic 'TEXCOORD' is defined for mismatched hardware registers between the output stage and input stage. [ EXECUTION ERROR #343: DEVICE_SHADER_LINKAGE_REGISTERINDEX ] D3D10: ERROR: ID3D10Device::DrawIndexed: Input Assembler - Vertex Shader linkage error: Signatures between stages are incompatible. The reason is that the input stage requires Semantic/Index (POSITION,0) as input, but it is not provided by the output stage. [ EXECUTION ERROR #342: DEVICE_SHADER_LINKAGE_SEMANTICNAME_NOT_FOUND ] The thing is, I've no idea how to fix this. The code I'm using does work and I've simply brought all of that code into a new project of mine. There are no build errors and this only appears when the game is running The .fx file is as follows: float4x4 matWorld; float4x4 matView; float4x4 matProjection; struct VS_INPUT { float4 Pos:POSITION; float2 TexCoord:TEXCOORD; }; struct PS_INPUT { float4 Pos:SV_POSITION; float2 TexCoord:TEXCOORD; }; Texture2D diffuseTexture; SamplerState diffuseSampler { Filter = MIN_MAG_MIP_POINT; AddressU = WRAP; AddressV = WRAP; }; // // Vertex Shader // PS_INPUT VS( VS_INPUT input ) { PS_INPUT output=(PS_INPUT)0; float4x4 viewProjection=mul(matView,matProjection); float4x4 worldViewProjection=mul(matWorld,viewProjection); output.Pos=mul(input.Pos,worldViewProjection); output.TexCoord=input.TexCoord; return output; } // // Pixel Shader // float4 PS(PS_INPUT input ) : SV_Target { return diffuseTexture.Sample(diffuseSampler,input.TexCoord); //return float4(1.0f,1.0f,1.0f,1.0f); } RasterizerState NoCulling { FILLMODE=SOLID; CULLMODE=NONE; }; technique10 Render { pass P0 { SetVertexShader( CompileShader( vs_4_0, VS() ) ); SetGeometryShader( NULL ); SetPixelShader( CompileShader( ps_4_0, PS() ) ); SetRasterizerState(NoCulling); } } In my game, the .fx file and model are called and set as follows: Loading in shader file //Set the shader flags - BMD DWORD dwShaderFlags = D3D10_SHADER_ENABLE_STRICTNESS; #if defined( DEBUG ) || defined( _DEBUG ) dwShaderFlags |= D3D10_SHADER_DEBUG; #endif ID3D10Blob * pErrorBuffer=NULL; if( FAILED( D3DX10CreateEffectFromFile( TEXT("TransformedTexture.fx" ), NULL, NULL, "fx_4_0", dwShaderFlags, 0, md3dDevice, NULL, NULL, &m_pEffect, &pErrorBuffer, NULL ) ) ) { char * pErrorStr = ( char* )pErrorBuffer->GetBufferPointer(); //If the creation of the Effect fails then a message box will be shown MessageBoxA( NULL, pErrorStr, "Error", MB_OK ); return false; } //Get the technique called Render from the effect, we need this for rendering later on m_pTechnique=m_pEffect->GetTechniqueByName("Render"); //Number of elements in the layout UINT numElements = TexturedLitVertex::layoutSize; //Get the Pass description, we need this to bind the vertex to the pipeline D3D10_PASS_DESC PassDesc; m_pTechnique->GetPassByIndex( 0 )->GetDesc( &PassDesc ); //Create Input layout to describe the incoming buffer to the input assembler if (FAILED(md3dDevice->CreateInputLayout( TexturedLitVertex::layout, numElements,PassDesc.pIAInputSignature, PassDesc.IAInputSignatureSize, &m_pVertexLayout ) ) ) { return false; } model loading: m_pTestRenderable=new CRenderable(); //m_pTestRenderable->create<TexturedVertex>(md3dDevice,8,6,vertices,indices); m_pModelLoader = new CModelLoader(); m_pTestRenderable = m_pModelLoader->loadModelFromFile( md3dDevice,"armoredrecon.fbx" ); m_pGameObjectTest = new CGameObject(); m_pGameObjectTest->setRenderable( m_pTestRenderable ); // Set primitive topology, how are we going to interpet the vertices in the vertex buffer md3dDevice->IASetPrimitiveTopology( D3D10_PRIMITIVE_TOPOLOGY_TRIANGLELIST ); if ( FAILED( D3DX10CreateShaderResourceViewFromFile( md3dDevice, TEXT( "armoredrecon_diff.png" ), NULL, NULL, &m_pTextureShaderResource, NULL ) ) ) { MessageBox( NULL, TEXT( "Can't load Texture" ), TEXT( "Error" ), MB_OK ); return false; } m_pDiffuseTextureVariable = m_pEffect->GetVariableByName( "diffuseTexture" )->AsShaderResource(); m_pDiffuseTextureVariable->SetResource( m_pTextureShaderResource ); Finally, the draw function code: //All drawing will occur between the clear and present m_pViewMatrixVariable->SetMatrix( ( float* )m_matView ); m_pWorldMatrixVariable->SetMatrix( ( float* )m_pGameObjectTest->getWorld() ); //Get the stride(size) of the a vertex, we need this to tell the pipeline the size of one vertex UINT stride = m_pTestRenderable->getStride(); //The offset from start of the buffer to where our vertices are located UINT offset = m_pTestRenderable->getOffset(); ID3D10Buffer * pVB=m_pTestRenderable->getVB(); //Bind the vertex buffer to input assembler stage - md3dDevice->IASetVertexBuffers( 0, 1, &pVB, &stride, &offset ); md3dDevice->IASetIndexBuffer( m_pTestRenderable->getIB(), DXGI_FORMAT_R32_UINT, 0 ); //Get the Description of the technique, we need this in order to loop through each pass in the technique D3D10_TECHNIQUE_DESC techDesc; m_pTechnique->GetDesc( &techDesc ); //Loop through the passes in the technique for( UINT p = 0; p < techDesc.Passes; ++p ) { //Get a pass at current index and apply it m_pTechnique->GetPassByIndex( p )->Apply( 0 ); //Draw call md3dDevice->DrawIndexed(m_pTestRenderable->getNumOfIndices(),0,0); //m_pD3D10Device->Draw(m_pTestRenderable->getNumOfVerts(),0); } Is there anything I've clearly done wrong or are missing? Spent 2 weeks trying to workout what on earth I've done wrong to no avail. Any insight a fresh pair eyes could give on this would be great.

  Read the article

• Playing NSF music in FMOD.net

  - by Tesserex

  So, as the title says, I want to be able to play NSF files using FMOD, because my project already uses FMOD and I'd rather not replace it. This will involve figuring out how existing players and emulators work and porting it. I haven't yet found an existing player that uses FMOD. My starting point is the MyNes source from http://sourceforge.net/projects/mynes/. There are two big steps between here and what I'm looking for. MyNes plays from a ROM, not NSF. So, I have to rip out the APU and get it to play NSF files. The MyNes APU uses SlimDX, so I have to convert that to FMOD.NET. I am really stuck about how to go about either of these, because I'm not that familiar with audio formats and it's hard finding resources online. So here are a few questions: From what I can tell from the NSF spec at http://kevtris.org/nes/nsfspec.txt, it's just contains the relevant memory section of the ROM, plus the header. If anyone can verify or correct this that would be great. The emulator APU uses data from the rest of the emulator to play, including things like cycle counts. I'm not sure what replaces this in a standalone player. Can't I just load all the music data at once into a stream and play it? Joining #1 and #2, does the header data from the NSF substitute for some of the ROM data in the emulator code? Using FMOD, will I be following the usercreatedsound example for loading a stream? And does this format count as PCM? Specifically MyNes says PCM8. Any tips on loading / playing the stream in FMOD are appreciated. As an aside, I don't really understand the loading / playing sections of the spec I linked at all. It seems to apply to 6502 systems / emulators only and not to my situation. I know it's a long shot for anyone here to have enough experience in this area to help, but anything you can provide is definitely appreciated. A link to an existing .NET library that does this would be even better, but I don't believe one exists.

  Read the article

• farseer physics xbox samples not working

  - by Hugh

  I have downloaded a few of the sample projects from the official farseer physics website and i just cant get them to run on my xbox. -My connection to the xbox is fine, other xbox projects debug fine on my xbox -I have tried running both the xbox versions of the samples (for example the farseer hello world sample project) and the windows version by right-clicking the project and making a copy for xbox. I get a bunch of errors but what i always get is "unreachable code detected" referring to code in the farseer library, it seems to be a problem to do with referencing/linking the farseer library to the main game project. Help please!

  Read the article

• First time shadow mapping problems

  - by user1294203

  I have implemented basic shadow mapping for the first time in OpenGL using shaders and I'm facing some problems. Below you can see an example of my rendered scene: The process of the shadow mapping I'm following is that I render the scene to the framebuffer using a View Matrix from the light point of view and the projection and model matrices used for normal rendering. In the second pass, I send the above MVP matrix from the light point of view to the vertex shader which transforms the position to light space. The fragment shader does the perspective divide and changes the position to texture coordinates. Here is my vertex shader, #version 150 core uniform mat4 ModelViewMatrix; uniform mat3 NormalMatrix; uniform mat4 MVPMatrix; uniform mat4 lightMVP; uniform float scale; in vec3 in_Position; in vec3 in_Normal; in vec2 in_TexCoord; smooth out vec3 pass_Normal; smooth out vec3 pass_Position; smooth out vec2 TexCoord; smooth out vec4 lightspace_Position; void main(void){ pass_Normal = NormalMatrix * in_Normal; pass_Position = (ModelViewMatrix * vec4(scale * in_Position, 1.0)).xyz; lightspace_Position = lightMVP * vec4(scale * in_Position, 1.0); TexCoord = in_TexCoord; gl_Position = MVPMatrix * vec4(scale * in_Position, 1.0); } And my fragment shader, #version 150 core struct Light{ vec3 direction; }; uniform Light light; uniform sampler2D inSampler; uniform sampler2D inShadowMap; smooth in vec3 pass_Normal; smooth in vec3 pass_Position; smooth in vec2 TexCoord; smooth in vec4 lightspace_Position; out vec4 out_Color; float CalcShadowFactor(vec4 lightspace_Position){ vec3 ProjectionCoords = lightspace_Position.xyz / lightspace_Position.w; vec2 UVCoords; UVCoords.x = 0.5 * ProjectionCoords.x + 0.5; UVCoords.y = 0.5 * ProjectionCoords.y + 0.5; float Depth = texture(inShadowMap, UVCoords).x; if(Depth < (ProjectionCoords.z + 0.001)) return 0.5; else return 1.0; } void main(void){ vec3 Normal = normalize(pass_Normal); vec3 light_Direction = -normalize(light.direction); vec3 camera_Direction = normalize(-pass_Position); vec3 half_vector = normalize(camera_Direction + light_Direction); float diffuse = max(0.2, dot(Normal, light_Direction)); vec3 temp_Color = diffuse * vec3(1.0); float specular = max( 0.0, dot( Normal, half_vector) ); float shadowFactor = CalcShadowFactor(lightspace_Position); if(diffuse != 0 && shadowFactor > 0.5){ float fspecular = pow(specular, 128.0); temp_Color += fspecular; } out_Color = vec4(shadowFactor * texture(inSampler, TexCoord).xyz * temp_Color, 1.0); } One of the problems is self shadowing as you can see in the picture, the crate has its own shadow cast on itself. What I have tried is enabling polygon offset (i.e. glEnable(POLYGON_OFFSET_FILL), glPolygonOffset(GLfloat, GLfloat) ) but it didn't change much. As you see in the fragment shader, I have put a static offset value of 0.001 but I have to change the value depending on the distance of the light to get more desirable effects , which not very handy. I also tried using front face culling when I render to the framebuffer, that didn't change much too. The other problem is that pixels outside the Light's view frustum get shaded. The only object that is supposed to be able to cast shadows is the crate. I guess I should pick more appropriate projection and view matrices, but I'm not sure how to do that. What are some common practices, should I pick an orthographic projection? From googling around a bit, I understand that these issues are not that trivial. Does anyone have any easy to implement solutions to these problems. Could you give me some additional tips? Please ask me if you need more information on my code. Here is a comparison with and without shadow mapping of a close-up of the crate. The self-shadowing is more visible.

  Read the article

• Why do my LWJGL fonts have dots and lines around them?

  - by Jordan

  When we render fonts there are weird dots and lines around the text. I have no idea why this would happen. Here is an image of what it looks like: Our font class looks like this: package me.NJ.ComputerTycoon.Font; import me.NJ.ComputerTycoon.BaseObjects.UDim2; import org.lwjgl.opengl.Display; import org.newdawn.slick.Color; import org.newdawn.slick.TrueTypeFont; public class Font { public TrueTypeFont font; private int fontSize = 18; private String fontName = "Calibri"; private int fontStyle = java.awt.Font.BOLD; public Font(String fontName, int fontStyle, int fontSize) { font = new TrueTypeFont(new java.awt.Font(fontName, fontStyle, fontSize), true); //font. } public Font(int fontStyle, int fontSize) { font = new TrueTypeFont(new java.awt.Font(fontName, fontStyle, fontSize), true); } public Font(int fontSize) { font = new TrueTypeFont(new java.awt.Font(fontName, fontStyle, fontSize), true); } public Font() { font = new TrueTypeFont(new java.awt.Font(fontName, fontStyle, fontSize), true); } public void drawString(int x, int y, String s, Color color){ this.font.drawString(x, y, s, color); } public void drawString(int x, int y, String s){ this.font.drawString(x, y, s); } public void drawString(float x, float y, String s, Color color){ this.font.drawString(x, y, s, color); } public void drawString(float x, float y, String s){ this.font.drawString(x, y, s); } public void drawString(UDim2 udim, String s){ this.font.drawString((Display.getWidth() * udim.getX().getScale()) + udim.getX().getOffset(), (Display.getHeight() * udim.getY().getScale()) + udim.getY().getOffset(), s); } public String getFontName(){ return this.fontName; } public int getFontSize(){ return this.fontSize; } public TrueTypeFont getFont(){ return this.font; } } What could be causing this?

  Read the article

• How do I animate a spritesheet in cocos2d Android

  - by user729053

  I'm trying to animate a sprite in a spritesheet, the goal is to make the character walk from left to right. I subclassed CCSprite: CharacterSprite. this is my code: CCSpriteFrameCache.sharedSpriteFrameCache().addSpriteFrames("WalkAnimation.plist"); CCSpriteSheet spriteSheet = CCSpriteSheet.spriteSheet("WalkAnimation.png"); w.addChild(spriteSheet); ArrayList<CCSpriteFrame> walkSprites = new ArrayList<CCSpriteFrame>(); for(int i = 1; i<=8;++i) { walkSprites.add(CCSpriteFrameCache.sharedSpriteFrameCache().spriteFrameByName("walk"+ i +".png")); } //float randomFactor = (float)Math.random()*10; CCAnimation walkAnimation = CCAnimation.animation("walk", 0.1f, walkSprites); Log.v("addEnemy", "Show"); this.character = CCSprite.sprite(walkSprites.get(0)); Log.v("addEnemy", "Don't Show"); this.walkAction = CCRepeatForever.action(CCAnimate.action(walkAnimation, false)); character.runAction(walkAction); for(int k =0; k<amount; k++) { float randomFactor = (float)Math.random()*10; character.setPosition(CGPoint.ccp(-randomFactor * character.getContentSize().width/2, winSize.height / 6.0f)); spriteSheet.addChild(character); } This code is in my 2nd scene. And whenever I press on Start Game, nothing happens. But the code is executed till: character = CharacterSprite.sprite("walk1.png"); Can someone provide me of a snippet of animation using a spritesheet?

  Read the article

• Why don't more games use vector art?

  - by Parris

  It would seem to me that vector art is more efficient in terms of resources/scalability; however, in most cases I have seen artists using bitmap/rasterized art. Is this a limitation put on the artists by the game programmers/designers? As a programmer I think vector art would be more ideal, since it allows for scaling up resolution without having to recreate the art, creating really large graphics or causing graphics to become blurry. The questions: why aren't more people using SVG/AI to create 2D game art? Would it actually be preferred (and who prefers it)? Are bitmap graphics a standard or a limitation (or maybe neither)? Background: I am working on an engine, and I had some kinda cool ideas for vector based graphics; however, I don't want to piss off artists in the future. I guess this is more a question centered around pragmatism and developing games.

  Read the article

• All libGDX input statements are returning TRUE at once

  - by MowDownJoe

  I'm fooling around with Box2D and libGDX and running into a peculiar problem with polling for input. Here's the code for the Screen's render() loop: @Override public void render(float delta) { Gdx.gl20.glClearColor(0, 0, .2f, 1); Gdx.gl20.glClear(GL20.GL_COLOR_BUFFER_BIT); camera.update(); game.batch.setProjectionMatrix(camera.combined); debugRenderer.render(world, camera.combined); if(Gdx.input.isButtonPressed(Keys.LEFT)){ Gdx.app.log("Input", "Left is being pressed."); pushyThingyBody.applyForceToCenter(-10f, 0); } if(Gdx.input.isButtonPressed(Keys.RIGHT)){ Gdx.app.log("Input", "Right is being pressed."); pushyThingyBody.applyForceToCenter(10f, 0); } world.step((1f/45f), 6, 2); } And the constructor is largely just setting up the World, Box2DDebugRenderer, and all the Bodies in the world: public SandBox(PhysicsSandboxGame game) { this.game = game; camera = new OrthographicCamera(800, 480); camera.setToOrtho(false); world = new World(new Vector2(0, -9.8f), true); debugRenderer = new Box2DDebugRenderer(); BodyDef bodyDef = new BodyDef(); bodyDef.type = BodyType.DynamicBody; bodyDef.position.set(100, 300); body = world.createBody(bodyDef); CircleShape circle = new CircleShape(); circle.setRadius(6f); FixtureDef fixtureDef = new FixtureDef(); fixtureDef.shape = circle; fixtureDef.density = .5f; fixtureDef.friction = .4f; fixtureDef.restitution = .6f; fixture = body.createFixture(fixtureDef); circle.dispose(); BodyDef groundBodyDef = new BodyDef(); groundBodyDef.position.set(new Vector2(0, 10)); groundBody = world.createBody(groundBodyDef); PolygonShape groundBox = new PolygonShape(); groundBox.setAsBox(camera.viewportWidth, 10f); groundBody.createFixture(groundBox, 0f); groundBox.dispose(); BodyDef pushyThingyBodyDef = new BodyDef(); pushyThingyBodyDef.type = BodyType.DynamicBody; pushyThingyBodyDef.position.set(new Vector2(400, 30)); pushyThingyBody = world.createBody(pushyThingyBodyDef); PolygonShape pushyThingyShape = new PolygonShape(); pushyThingyShape.setAsBox(40f, 10f); FixtureDef pushyThingyFixtureDef = new FixtureDef(); pushyThingyFixtureDef.shape = pushyThingyShape; pushyThingyFixtureDef.density = .4f; pushyThingyFixtureDef.friction = .1f; pushyThingyFixtureDef.restitution = .5f; pushyFixture = pushyThingyBody.createFixture(pushyThingyFixtureDef); pushyThingyShape.dispose(); } Testing this on the desktop. Basically, whenever I hit the appropriate keys, neither of the if statements in the loop return true. However, when I click in the window, both statements return true, resulting in a 0 net force on the body. Why is this?

  Read the article

• Handling player logoff and logon in a persistent world without breaking immersion

  - by Boreal

  One problem I've never seen fixed in any persistent online game is how to handle player logon and logoff without the characters just popping in and out of the world. My first thought is to simply make a player's offline state as their character being asleep, but that doesn't make sense in the event of a disconnect and not an intentional logoff. How would you fix this, if you would even bother fixing it at all?

  Read the article

• How To show document directory save image in thumbnail in cocos2d class

  - by Anil gupta

  I have just implemented multiple photo selection from iphone photo library and i am saving all selected photo in document directory every time as a array, now i want to show all saved images in my class from document directory as a thumbnail, i have tried some logic but my game getting crashing, My code is below. Any help will be appreciate. Thanks in advance. -(id) init { // always call "super" init // Apple recommends to re-assign "self" with the "super" return value if( (self=[super init])) { CCSprite *photoalbumbg = [CCSprite spriteWithFile:@"photoalbumbg.png"]; photoalbumbg.anchorPoint = ccp(0,0); [self addChild:photoalbumbg z:0]; //Background Sound // [[SimpleAudioEngine sharedEngine]playBackgroundMusic:@"Background Music.wav" loop:YES]; CCSprite *photoalbumframe = [CCSprite spriteWithFile:@"photoalbumframe.png"]; photoalbumframe.position = ccp(160,240); [self addChild:photoalbumframe z:2]; CCSprite *frame = [CCSprite spriteWithFile:@"Photo-Frames.png"]; frame.position = ccp(160,270); [self addChild:frame z:1]; /*_____________________________________________________________________________________*/ CCMenuItemImage * upgradebtn = [CCMenuItemImage itemFromNormalImage:@"AlbumUpgrade.png" selectedImage:@"AlbumUpgrade.png" target:self selector:@selector(Upgrade:)]; CCMenu * fMenu = [CCMenu menuWithItems:upgradebtn,nil]; fMenu.position = ccp(200,110); [self addChild:fMenu z:3]; NSError *error; NSFileManager *fM = [NSFileManager defaultManager]; NSString *documentsDirectory = [NSHomeDirectory() stringByAppendingPathComponent:@"Documents"]; NSLog(@"Documents directory: %@", [fM contentsOfDirectoryAtPath:documentsDirectory error:&error]); NSArray *allfiles = [fM contentsOfDirectoryAtPath :documentsDirectory error:&error]; directoryList = [[NSMutableArray alloc] init]; for(NSString *file in allfiles) { NSString *path = [documentsDirectory stringByAppendingPathComponent:file]; [directoryList addObject:file]; } NSLog(@"array file name value ==== %@", directoryList); CCSprite *temp = [CCSprite spriteWithFile:[directoryList objectAtIndex:0]]; [temp setTextureRect:CGRectMake(160.0f, 240.0f, 50,50)]; // temp.anchorPoint = ccp(0,0); [self addChild:temp z:10]; for(UIImage *file in directoryList) { // NSData *pngData = [NSData dataWithContentsOfFile:file]; // image = [UIImage imageWithData:pngData]; NSLog(@"uiimage = %@",image); // UIImage *image = [UIImage imageWithContentsOfFile:file]; for (int i=1; i<=3; i++) { for (int j=1;j<=3; j++) { CCTexture2D *tex = [[[CCTexture2D alloc] initWithImage:file] autorelease]; CCSprite *selectedimage = [CCSprite spriteWithTexture:tex rect:CGRectMake(0, 0, 67, 66)]; selectedimage.position = ccp(100*i,350*j); [self addChild:selectedimage]; } } } } return self; }

  Read the article

• Voxel Engine in Multiplayer?

  - by Oliver Schöning

  This is a question more out of Interest for now, because I am not even near to the point that I could create this project at the moment. I really like the progress on the Atomontage Engine. A Voxel engine that is WIP at the moment. I would like to create a Voxel SERVER eventually. First in JavaScript (That's what I am learning right now) later perhaps in C++ for speed. Remember, I am perfectly aware that this is very hard! This is a brainstorm for the next 10 years as for now. What I would like to achieve one day is a Multiplayer Game in the Browser where the voxels positions are updated by XYZ input from the server. The Browser Does only 3 things: sending player input to the server, updating Voxel positions send from the server and rendering the world. I imagine using something like the Three.js libary on the client side. So that would be my programming dream right there... Now to something simpler for the near future. Right now I am learning javascript. And I am making games with Construct2. (A really cool JavaScript "game maker") The plan is to create a 2D Voxel enviorment (Block Voxels) on the Socket.IO Server* and send the position of the Voxels and Players to the Client side which then positions the Voxel Blocks to the Server Output coordinates. I think that is a bit more manageable then the other bigger idea. And also there should be no worries about speed with this type of project in JavaScript (I hope). Extra Info: *I am using nodejs (Without really knowing what it does besides making Socket.IO work) So now some questions: Is the "dream project" doable in JavaScript? Or is C++ just the best option because it does not take as long to be interpreted at run time like JavaScript? What are the limitations? I can think of some: Need of a Powerful server depending on how much information the server has to process. Internet Speed; Sending the data of the Voxel positions to every player could add up being very high! The browser FPS might go down quickly if rendering to many objects. One way of fixing reducing the packages Could be to let the browser calculate some of the Voxel positions from Several Values. But that would slow down the Client side too. What about the more achievable project? I am almost 100% convinced that this is possible in JavaScript, and that there are several ways of doing this. This is just XY position Updating for now.. Hope this did make some sense. Please comment if you got something to say :D

  Read the article

• Voxel Face Crawling (Mesh simplification, possibly using greedy)

  - by Tim Winter

  This is in regards to a Minecraft-like terrain engine. I store blocks in chunks (16x256x16 blocks in a chunk). When I generate a chunk, I use multiple procedural techniques to set the terrain and to place objects. While generating, I keep one 1D array for the full chunk (solid or not) and a separate 1D array of solid blocks. After generation, I iterate through the solid blocks checking their neighbors so I only generate block faces that don't have solid neighbors. I store which faces to generate in their own list (that's 6 lists, one per possible face). When rendering a chunk, I render all lists in the camera's current chunk and only the lists facing the camera in all other chunks. Using a 2D atlas with this little shader trick Andrew Russell suggested, I want to merge similar faces together completely. That is, if they are in the same list (same normal), are adjacent to each other, have the same light level, etc. My assumption would be to have each of the 6 lists sorted by the axis they rest on, then by the other two axes (the list for the top of a block would be sorted by it's Y value, then X, then Z). With this alone, I could quite easily merge strips of faces, but I'm looking to merge more than just strips together when possible. I've read up on this greedy meshing algorithm, but I am having a lot of trouble understanding it. To even use it, I would think I'd need to perform a type of flood-fill per sorted list to get the groups of merge-able faces. Then, per group, perform the greedy algorithm. It all sounds awfully expensive if I would ever want dynamic terrain/lighting after initial generation. So, my question: To perform merging of faces as described (ignoring whether it's a bad idea for dynamic terrain/lighting), is there perhaps an algorithm that is simpler to implement? I would also quite happily accept an answer that walks me through the greedy algorithm in a much simpler way (a link or explanation). I don't mind a slight performance decrease if it's easier to implement or even if it's only a little better than just doing strips. I worry that most algorithms focus on triangles rather than quads and using a 2D atlas the way I am, I don't know that I could implement something triangle based with my current skills. PS: I already frustum cull per chunk and as described, I also cull faces between solid blocks. I don't occlusion cull yet and may never.

  Read the article

• Fastest pathfinding for static node matrix

  - by Sean Martin

  I'm programming a route finding routine in VB.NET for an online game I play, and I'm searching for the fastest route finding algorithm for my map type. The game takes place in space, with thousands of solar systems connected by jump gates. The game devs have provided a DB dump containing a list of every system and the systems it can jump to. The map isn't quite a node tree, since some branches can jump to other branches - more of a matrix. What I need is a fast pathfinding algorithm. I have already implemented an A* routine and a Dijkstra's, both find the best path but are too slow for my purposes - a search that considers about 5000 nodes takes over 20 seconds to compute. A similar program on a website can do the same search in less than a second. This website claims to use D*, which I have looked into. That algorithm seems more appropriate for dynamic maps rather than one that does not change - unless I misunderstand it's premise. So is there something faster I can use for a map that is not your typical tile/polygon base? GBFS? Perhaps a DFS? Or have I likely got some problem with my A* - maybe poorly chosen heuristics or movement cost? Currently my movement cost is the length of the jump (the DB dump has solar system coordinates as well), and the heuristic is a quick euclidean calculation from the node to the goal. In case anyone has some optimizations for my A*, here is the routine that consumes about 60% of my processing time, according to my profiler. The coordinateData table contains a list of every system's coordinates, and neighborNode.distance is the distance of the jump. Private Function findDistance(ByVal startSystem As Integer, ByVal endSystem As Integer) As Integer 'hCount += 1 'If hCount Mod 0 = 0 Then 'Return hCache 'End If 'Initialize variables to be filled Dim x1, x2, y1, y2, z1, z2 As Integer 'LINQ queries for solar system data Dim systemFromData = From result In jumpDataDB.coordinateDatas Where result.systemId = startSystem Select result.x, result.y, result.z Dim systemToData = From result In jumpDataDB.coordinateDatas Where result.systemId = endSystem Select result.x, result.y, result.z 'LINQ execute 'Fill variables with solar system data for from and to system For Each solarSystem In systemFromData x1 = (solarSystem.x) y1 = (solarSystem.y) z1 = (solarSystem.z) Next For Each solarSystem In systemToData x2 = (solarSystem.x) y2 = (solarSystem.y) z2 = (solarSystem.z) Next Dim x3 = Math.Abs(x1 - x2) Dim y3 = Math.Abs(y1 - y2) Dim z3 = Math.Abs(z1 - z2) 'Calculate distance and round 'Dim distance = Math.Round(Math.Sqrt(Math.Abs((x1 - x2) ^ 2) + Math.Abs((y1 - y2) ^ 2) + Math.Abs((z1 - z2) ^ 2))) Dim distance = firstConstant * Math.Min(secondConstant * (x3 + y3 + z3), Math.Max(x3, Math.Max(y3, z3))) 'Dim distance = Math.Abs(x1 - x2) + Math.Abs(z1 - z2) + Math.Abs(y1 - y2) 'hCache = distance Return distance End Function And the main loop, the other 30% 'Begin search While openList.Count() != 0 'Set current system and move node to closed currentNode = lowestF() move(currentNode.id) For Each neighborNode In neighborNodes If Not onList(neighborNode.toSystem, 0) Then If Not onList(neighborNode.toSystem, 1) Then Dim newNode As New nodeData() newNode.id = neighborNode.toSystem newNode.parent = currentNode.id newNode.g = currentNode.g + neighborNode.distance newNode.h = findDistance(newNode.id, endSystem) newNode.f = newNode.g + newNode.h newNode.security = neighborNode.security openList.Add(newNode) shortOpenList(OLindex) = newNode.id OLindex += 1 Else Dim proposedG As Integer = currentNode.g + neighborNode.distance If proposedG < gValue(neighborNode.toSystem) Then changeParent(neighborNode.toSystem, currentNode.id, proposedG) End If End If End If Next 'Check to see if done If currentNode.id = endSystem Then Exit While End If End While If clarification is needed on my spaghetti code, I'll try to explain.

  Read the article

• Graph Isomorphism > What kind of Graph is this?

  - by oodavid

  Essentially, this is a variation of Comparing Two Tree Structures, however I do not have "trees", but rather another type of graph. I need to know what kind of Graph I have in order to figure out if there's a Graph Isomorphism Special Case... As you can see, they are: Not Directed Not A Tree Cyclic Max 4 connections But I still don't know the correct terminology, nor the which Isomorphism algorithm to pursue, guidance appreciated.

  Read the article

• How can I author objects with perspective that fit into a tile-based map but span multiple tiles?

  - by Growler

  I'm creating a tilemap city and trying to figure out the most efficient way to create unique building scenes. The trick is, I need to maintain a sort of 2D, almost-top-down perspective, which is hard to do with buildings or large objects that span multiple tiles. I've tried doing three buildings at a time, and mixing and matching the base layer and colors, like this: This creates a weird overlapping effect, and also doesn't seem that efficient from a production standpoint. But it was the best way to have shadows appear correctly on the neighboring buildings. I'm wondering if modular buildings would be the way to go? That way I can mix and match any set of buildings together as tiles: I guess I would have to risk some perspective and shadowing to get the buildings to align correctly. What sort of authoring process could I use to allow me to create a variety of buildings (or other objects) that maintain this perspective while spanning multiple tiles worth of screen space? Would you recommend creating blank buildings, and then affixing art overlays as necessary to make the buildings unique? Or should they be directly part of the building tile (for example, create a separate tileset of buildings signs and colorings)?

  Read the article

• Implementation of Race Game Tree

  - by Mert Toka

  I build a racing game right in OpenGL using Glut, and I'm a bit lost in all the details. First of all, any suggestions as a road map would be more than great. So far what I thought is this: Tree implementation for transformations. Simulated dynamics.(*) Octree implementation for collusion detection. Actual collusion detection.(*) Modelling in Maya and export them as .OBJs. Polishing the game with GLSL or something like that for graphics quality. (*): I am not sure the order of these two. So I started with the simulated dynamics without tree, and it turned out to be a huge chaos for me. Is there any way you can think of such that could help me to build such tree to use in racing game? I thought something like this but I have no idea how to implement it. Reds are static, yellows are dynamic nodes

  Read the article

• Java Slick2d Animation not working

  - by user3558075

  Hello everyone I am trying to make a simple 2d game using java and the slick2d library. this is my first time doing it and i need some help. right now I am trying to make the Animations for the character, so that when you go right he turns right and when you go left he turns left... but I keep getting an error when im drawing the character, ive try'd re-downloading slick but that didnt work. when i get rid of the player.draw(x,y); line of code it dosen't crash but the character isnt there. heres my code, can anyone help? package enteties; import input.Keyinput; import org.newdawn.slick.Animation; import org.newdawn.slick.GameContainer; import org.newdawn.slick.Graphics; import org.newdawn.slick.Image; import org.newdawn.slick.Input; import org.newdawn.slick.SlickException; import org.newdawn.slick.state.BasicGameState; import org.newdawn.slick.state.StateBasedGame; import playerinfo.Playerinfo; public class Player extends BasicGameState{ Playerinfo pi = new Playerinfo(); Keyinput ki = new Keyinput(); Animation player,up,down,left,right; public void init(GameContainer gc, StateBasedGame sbg) throws SlickException { Image[] goingUp = {new Image("res/buckysBack.png") , new Image("res/charBack.png")}; Image[] goingDown = {new Image("res/buckysFront.png") , new Image("res/charFront.png")}; Image[] goingLeft = {new Image("res/buckysLeft.png") , new Image("res/charLeft.png")}; Image[] goingRight = {new Image("res/buckysRight.png") , new Image("res/charRight.png")}; int[] duration = {200,200}; Animation up = new Animation(goingUp,duration,false); Animation down = new Animation(goingDown,duration,false); Animation left = new Animation(goingLeft,duration,false); Animation right = new Animation(goingRight,duration,false); player = up; } public void render(GameContainer gc, StateBasedGame sbg, Graphics g) throws SlickException { //error happens here, when i remove this line it dosent crash player.draw(720,450); } public void update(GameContainer gc, StateBasedGame sbg, int delta) throws SlickException { } public int getID() { return 0; } }

  Read the article

• Admob banner not getting remove from superview

  - by Anil gupta

  I am developing one 2d game using cocos2d framework, in this game i am using admob for advertising, in some classes not in all classes but admob banner is visible in every class and after some time game getting crash also. I am not getting how admob banner is comes in every class in fact i have not declare in Rootviewcontroller class. can any one suggest me how to integrate Admob in cocos2d game, i want Admob banner in particular classes not in every class, I am using latest google admob sdk, my code is below: Thanks in advance ` -(void)AdMob{ NSLog(@"ADMOB"); CGSize winSize = [[CCDirector sharedDirector]winSize]; // Create a view of the standard size at the bottom of the screen. if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad){ bannerView_ = [[GADBannerView alloc] initWithFrame:CGRectMake(size.width/2-364, size.height - GAD_SIZE_728x90.height, GAD_SIZE_728x90.width, GAD_SIZE_728x90.height)]; } else { // It's an iPhone bannerView_ = [[GADBannerView alloc] initWithFrame:CGRectMake(size.width/2-160, size.height - GAD_SIZE_320x50.height, GAD_SIZE_320x50.width, GAD_SIZE_320x50.height)]; } if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad) { bannerView_.adUnitID =@"a15062384653c9e"; } else { bannerView_.adUnitID =@"a15062392a0aa0a"; } bannerView_.rootViewController = self; [[[CCDirector sharedDirector]openGLView]addSubview:bannerView_]; [bannerView_ loadRequest:[GADRequest request]]; GADRequest *request = [[GADRequest alloc] init]; request.testing = [NSArray arrayWithObjects: GAD_SIMULATOR_ID, nil]; // Simulator [bannerView_ loadRequest:request]; } //best practice for removing the barnnerView_ -(void)removeSubviews{ NSArray* subviews = [[CCDirector sharedDirector]openGLView].subviews; for (id SUB in subviews){ [(UIView*)SUB removeFromSuperview]; [SUB release]; } NSLog(@"remove from view"); } //this makes the refreshTimer count -(void)targetMethod:(NSTimer *)theTimer{ //INCREASE OF THE TIMER AND SECONDS elapsedTime++; seconds++; //INCREASE OF THE MINUTOS EACH 60 SECONDS if (seconds>=60) { seconds=0; minutes++; [self removeSubviews]; [self AdMob]; } NSLog(@"TIME: %02d:%02d", minutes, seconds); } `

  Read the article

• morph a sphere to a cube and a a cube to a sphere with GLSL

  - by nkint

  hi i'm getting started with glsl with quartz composer. i have a patch with a particle system in which each particle is mapped into a sphere with a blend value. with blend=0 particles are in random positions, blend=1 particles are in the sphere. the code is here: vec3 sphere(vec2 domain) { vec3 range; range.x = radius * cos(domain.y) * sin(domain.x); range.y = radius * sin(domain.y) * sin(domain.x); range.z = radius * cos(domain.x); return range; } // in main: normal = sphere(p0); * blend + gl_Normal * (1.0 - blend); i'd like the particle to be on a cube if blend=0 i've tried to find but i can't figure out some parametric equation for the cube. mayebe it is not the right way?

  Read the article

• 3d transformation of game world keeping gameplay 2d - COCOS2D 2.0

  - by samfisher

  Using: COCOS2D + iOS. I want to rotate the game world, may be loading another .tmx file for another dimensions when user want to switch dimension. the effect what I am looking for is something like this:CLICK HERE What I have thought of till now: rotating CCCamera will be mandatory. Question: How will I have the other part of the level in place while the camera rotates/rotating? I can load a CCSprite and rotate it accordingly to the 3rd dimension. phew..!! Question: When the camera and world is rotated, will the player controls work properly.. I think not...? I think a better option would be to checkout with COCOS3D... there I could implement 3d world... right?? Question: Not sure how well 2d dynamics will work there as I want to user Box2d as physics engine.. could anyone provide suggestions? Regards, Sam

  Read the article

• Vertex Normals, Loading Mesh Data

  - by Ramon Johannessen

  My test FBX mesh is a cube. From what I surmise, it seems that the cube is on the extreme end of this issue, but I believe that the same issue would be able to occur in any mesh: Each vertex has 3 normals, each pointing a different direction. Of course loading in any type of mesh, potentially ones having thousands of vertices, I need to use indices and not duplicate shared verts. Currently, I'm just writing the normals to the vertex at the index that the FBX data tells me they go to, which has the effect of overwriting any previous normal data. But for lighting calculations I need more info, something that's equivalent to a normal per face, but I have no idea how this should be done. Do I average the 3 different verts' normals together or what?

  Read the article

• Tile Collision & Sliding against tiles

  - by Devin Rawlek

  I have a tile based map with a top down camera. My sprite stops moving when he collides with a wall in any of the four directions however I am trying to get the sprite to slide along the wall if more than one directional key is pressed after being stopped. Tiles are set to 32 x 32. Here is my code; // Gets Tile Player Is Standing On var splatterTileX = (int)player.Position.X / Engine.TileWidth; var splatterTileY = (int)player.Position.Y / Engine.TileHeight; // Foreach Layer In World Splatter Map Layers foreach (var layer in WorldSplatterTileMapLayers) { // If Sprite Is Not On Any Edges if (splatterTileX < layer.Width - 1 && splatterTileX > 0 && splatterTileY < layer.Height - 1 && splatterTileY > 0) { tileN = layer.GetTile(splatterTileX, splatterTileY - 1); // North tileNE = layer.GetTile(splatterTileX + 1, splatterTileY - 1); // North-East tileE = layer.GetTile(splatterTileX + 1, splatterTileY); // East tileSE = layer.GetTile(splatterTileX + 1, splatterTileY + 1); // South-East tileS = layer.GetTile(splatterTileX, splatterTileY + 1); // South tileSW = layer.GetTile(splatterTileX - 1, splatterTileY + 1); // South-West tileW = layer.GetTile(splatterTileX - 1, splatterTileY); // West tileNW = layer.GetTile(splatterTileX - 1, splatterTileY - 1); // North-West } // If Sprite Is Not On Any X Edges And Is On -Y Edge if (splatterTileX < layer.Width - 1 && splatterTileX > 0 && splatterTileY == 0) { tileE = layer.GetTile(splatterTileX + 1, splatterTileY); // East tileSE = layer.GetTile(splatterTileX + 1, splatterTileY + 1); // South-East tileS = layer.GetTile(splatterTileX, splatterTileY + 1); // South tileSW = layer.GetTile(splatterTileX - 1, splatterTileY + 1); // South-West tileW = layer.GetTile(splatterTileX - 1, splatterTileY); // West } // If Sprite Is On +X And -Y Edges if (splatterTileX == layer.Width - 1 && splatterTileY == 0) { tileS = layer.GetTile(splatterTileX, splatterTileY + 1); // South tileSW = layer.GetTile(splatterTileX - 1, splatterTileY + 1); // South-West tileW = layer.GetTile(splatterTileX - 1, splatterTileY); // West } // If Sprite Is On +X Edge And Y Is Not On Any Edge if (splatterTileX == layer.Width - 1 && splatterTileY < layer.Height - 1 && splatterTileY > 0) { tileS = layer.GetTile(splatterTileX, splatterTileY + 1); // South tileSW = layer.GetTile(splatterTileX - 1, splatterTileY + 1); // South-West tileW = layer.GetTile(splatterTileX - 1, splatterTileY); // West tileNW = layer.GetTile(splatterTileX - 1, splatterTileY - 1); // North-West tileN = layer.GetTile(splatterTileX, splatterTileY - 1); // North } // If Sprite Is On +X And +Y Edges if (splatterTileX == layer.Width - 1 && splatterTileY == layer.Height - 1) { tileW = layer.GetTile(splatterTileX - 1, splatterTileY); // West tileNW = layer.GetTile(splatterTileX - 1, splatterTileY - 1); // North-West tileN = layer.GetTile(splatterTileX, splatterTileY - 1); // North } // If Sprite Is Not On Any X Edges And Is On +Y Edge if (splatterTileX < (layer.Width - 1) && splatterTileX > 0 && splatterTileY == layer.Height - 1) { tileW = layer.GetTile(splatterTileX - 1, splatterTileY); // West tileNW = layer.GetTile(splatterTileX - 1, splatterTileY - 1); // North-West tileN = layer.GetTile(splatterTileX, splatterTileY - 1); // North tileNE = layer.GetTile(splatterTileX + 1, splatterTileY - 1); // North-East tileE = layer.GetTile(splatterTileX + 1, splatterTileY); // East } // If Sprite Is On -X And +Y Edges if (splatterTileX == 0 && splatterTileY == layer.Height - 1) { tileN = layer.GetTile(splatterTileX, splatterTileY - 1); // North tileNE = layer.GetTile(splatterTileX + 1, splatterTileY - 1); // North-East tileE = layer.GetTile(splatterTileX + 1, splatterTileY); // East } // If Sprite Is On -X Edge And Y Is Not On Any Edges if (splatterTileX == 0 && splatterTileY < (layer.Height - 1) && splatterTileY > 0) { tileN = layer.GetTile(splatterTileX, splatterTileY - 1); // North tileNE = layer.GetTile(splatterTileX + 1, splatterTileY - 1); // North-East tileE = layer.GetTile(splatterTileX + 1, splatterTileY); // East tileSE = layer.GetTile(splatterTileX + 1, splatterTileY + 1); // South-East tileS = layer.GetTile(splatterTileX, splatterTileY + 1); // South } // If Sprite Is In The Top Left Corner if (splatterTileX == 0 && splatterTileY == 0) { tileE = layer.GetTile(splatterTileX + 1, splatterTileY); // East tileSE = layer.GetTile(splatterTileX + 1, splatterTileY + 1); // South-East tileS = layer.GetTile(splatterTileX, splatterTileY + 1); // South } // Creates A New Rectangle For TileN tileN.TileRectangle = new Rectangle(splatterTileX * Engine.TileWidth, (splatterTileY - 1) * Engine.TileHeight, Engine.TileWidth, Engine.TileHeight); // Tile Collision Detection Between Player Rectangle And N Tile var tileNCollision = player.Rectangle.Intersects(tileN.TileRectangle); // Creates A New Rectangle For TileNE tileNE.TileRectangle = new Rectangle((splatterTileX + 1) * Engine.TileWidth, (splatterTileY - 1) * Engine.TileHeight, Engine.TileWidth, Engine.TileHeight); // Tile Collision Detection Between Player Rectangle And NE Tile var tileNECollision = player.Rectangle.Intersects(tileNE.TileRectangle); // Creates A New Rectangle For TileE tileE.TileRectangle = new Rectangle((splatterTileX + 1) * Engine.TileWidth, splatterTileY * Engine.TileHeight, Engine.TileWidth, Engine.TileHeight); // Tile Collision Detection Between Player Rectangle And E Tile var tileECollision = player.Rectangle.Intersects(tileE.TileRectangle); // Creates A New Rectangle For TileSE tileSE.TileRectangle = new Rectangle((splatterTileX + 1) * Engine.TileWidth, (splatterTileY + 1) * Engine.TileHeight, Engine.TileWidth, Engine.TileHeight); // Tile Collision Detection Between Player Rectangle And SE Tile var tileSECollision = player.Rectangle.Intersects(tileSE.TileRectangle); // Creates A New Rectangle For TileS tileS.TileRectangle = new Rectangle(splatterTileX * Engine.TileWidth, (splatterTileY + 1) * Engine.TileHeight, Engine.TileWidth, Engine.TileHeight); // Tile Collision Detection Between Player Rectangle And S Tile var tileSCollision = player.Rectangle.Intersects(tileS.TileRectangle); // Creates A New Rectangle For TileSW tileSW.TileRectangle = new Rectangle((splatterTileX - 1) * Engine.TileWidth, (splatterTileY + 1) * Engine.TileHeight, Engine.TileWidth, Engine.TileHeight); // Tile Collision Detection Between Player Rectangle And SW Tile var tileSWCollision = player.Rectangle.Intersects(tileSW.TileRectangle); // Creates A New Rectangle For TileW tileW.TileRectangle = new Rectangle((splatterTileX - 1) * Engine.TileWidth, splatterTileY * Engine.TileHeight, Engine.TileWidth, Engine.TileHeight); // Tile Collision Detection Between Player Rectangle And Current Tile var tileWCollision = player.Rectangle.Intersects(tileW.TileRectangle); // Creates A New Rectangle For TileNW tileNW.TileRectangle = new Rectangle((splatterTileX - 1) * Engine.TileWidth, (splatterTileY - 1) * Engine.TileHeight, Engine.TileWidth, Engine.TileHeight); // Tile Collision Detection Between Player Rectangle And Current Tile var tileNWCollision = player.Rectangle.Intersects(tileNW.TileRectangle); // Allow Sprite To Occupy More Than One Tile if (tileNCollision && tileN.TileBlocked == false) { tileN.TileOccupied = true; } if (tileECollision && tileE.TileBlocked == false) { tileE.TileOccupied = true; } if (tileSCollision && tileS.TileBlocked == false) { tileS.TileOccupied = true; } if (tileWCollision && tileW.TileBlocked == false) { tileW.TileOccupied = true; } // Player Up if (keyState.IsKeyDown(Keys.W) || (gamePadOneState.DPad.Up == ButtonState.Pressed)) { player.CurrentAnimation = AnimationKey.Up; if (tileN.TileOccupied == false) { if (tileNWCollision && tileNW.TileBlocked || tileNCollision && tileN.TileBlocked || tileNECollision && tileNE.TileBlocked) { playerMotion.Y = 0; } else playerMotion.Y = -1; } else if (tileN.TileOccupied) { if (tileNWCollision && tileNW.TileBlocked || tileNECollision && tileNE.TileBlocked) { playerMotion.Y = 0; } else playerMotion.Y = -1; } } // Player Down if (keyState.IsKeyDown(Keys.S) || (gamePadOneState.DPad.Down == ButtonState.Pressed)) { player.CurrentAnimation = AnimationKey.Down; // Check Collision With Tiles if (tileS.TileOccupied == false) { if (tileSWCollision && tileSW.TileBlocked || tileSCollision && tileS.TileBlocked || tileSECollision && tileSE.TileBlocked) { playerMotion.Y = 0; } else playerMotion.Y = 1; } else if (tileS.TileOccupied) { if (tileSWCollision && tileSW.TileBlocked || tileSECollision && tileSE.TileBlocked) { playerMotion.Y = 0; } else playerMotion.Y = 1; } } // Player Left if (keyState.IsKeyDown(Keys.A) || (gamePadOneState.DPad.Left == ButtonState.Pressed)) { player.CurrentAnimation = AnimationKey.Left; if (tileW.TileOccupied == false) { if (tileNWCollision && tileNW.TileBlocked || tileWCollision && tileW.TileBlocked || tileSWCollision && tileSW.TileBlocked) { playerMotion.X = 0; } else playerMotion.X = -1; } else if (tileW.TileOccupied) { if (tileNWCollision && tileNW.TileBlocked || tileSWCollision && tileSW.TileBlocked) { playerMotion.X = 0; } else playerMotion.X = -1; } } // Player Right if (keyState.IsKeyDown(Keys.D) || (gamePadOneState.DPad.Right == ButtonState.Pressed)) { player.CurrentAnimation = AnimationKey.Right; if (tileE.TileOccupied == false) { if (tileNECollision && tileNE.TileBlocked || tileECollision && tileE.TileBlocked || tileSECollision && tileSE.TileBlocked) { playerMotion.X = 0; } else playerMotion.X = 1; } else if (tileE.TileOccupied) { if (tileNECollision && tileNE.TileBlocked || tileSECollision && tileSE.TileBlocked) { playerMotion.X = 0; } else playerMotion.X = 1; } } I have my tile detection setup so the 8 tiles around the sprite are the only ones detected. The collision variable is true if the sprites rectangle intersects with one of the detected tiles. The sprites origin is centered at 16, 16 on the image so whenever this point goes over to the next tile it calls the surrounding tiles. I am trying to have collision detection like in the game Secret of Mana. If I remove the diagonal checks the sprite will pass through thoses tiles because whichever tile the sprites origin is on will be the detection center. So if the sprite is near the edge of the tile and then goes up it looks like half the sprite is walking through the wall. Is there a way for the detection to occur for each tile the sprite's rectangle touches?

  Read the article

• C# Item system design approach, should I use abstract classes, interfaces or virutals?

  - by vexe

  I'm working on a Resident Evil 1/2/3/0/Remake type of game. Currently I've done a big part of the inventory system (here's a link if you wanna see my inventory, pretty outdated, added a lot of features and made a lot of enhancements) Now I'm thinking about how to approach the items system, If you've played any Resident Evil game or any of its likes you should be familiar with what I'm trying to achieve. Here's a very simple category I made for the items: So you have different items, with different operations you could perform on them, there are usable items that you could use, like for example herbs and first aid kits that 'using' them would affect your health, keys to unlock doors, and equipable items that you could 'equip' like weapons. Also, you can 'combine' two items together to get new one, like for example mixing a green and red herb would give you a new type of herb, or combining a lighter with a paper, would give you a burnt paper, or ammo with a gun, would reload the gun or something. etc. You know the usual RE drill. Not all items are 'transformable', in that, for example: lighter + paper = burnt paper (it's the paper that 'transforms' to burnt paper and not the lighter, the lighter is not transformable it will remain as it is) green herb + red herb = newHerb1 (both herbs will vanish and transform to this new type of herb) ammo + gun = reload gun (ammo state will remain as it is, it won't change but it will just decrease, nothing will happen to the gun it just gets reloaded) Also a key note to remember is that you can't just combine items randomly, each item has a 'mating' item(s). So to sum up, different items, and different operations on them. The question is, how to approach this, design-wise? I've been learning about interfaces, but it just doesn't quite get into my head, I mean, why not just use classes with the good old inheritance? I know the technical details of interfaces and that the cool thing about them is that they don't require an inheritance chain, but I just can't see how to use them properly, that is, if they were the right thing to use here. So should I go with just classes and inheritance? just like in the tree I showed you? or should I think more about how to use interfaces? (IUsable, IEquipable, ITransformable) - why not just use classes UsableItem, Equipable item, TransformableItem? I want something that won't give me headaches in the long run, something resilient/flexible to future changes. I'm OK using classes, but I smell something better here. The way I'm thinking is to possibly use both inheritance and interfaces, so that you have a branch like this: item - equipable - weapon. but then again, the weapon has methods like 'reload' 'examine' 'equip' some of them 'combine' so I'm thinking to make weapon implement ICombinable?... not all items get used the same way, using herbs will increase your health, using a key will open a door, so IUsable maybe? Should I use a big database (XML for example) for all the items, items names, mates, nRowsReq, nColsReq, etc? Thanks so much for your answers in advanced, note that demo 3 is coming after I'm done with items :D

  Read the article

• Efficient solution for multiplayer space partioning?

  - by DevilWithin

  This question is a little tricky, but I will try to make it clear, Lets say I am building an online game, not in a mmo scale, but gladly supporting as many players as possible, in a authoritative server approach, and I want really big worlds with lots of AI simulated enemies. I am aware of a few strategies to save server's CPU by subdividing the space and not processing what doesn't need processing. I 've already split the world by regions, that will require loading times and small transitions, which i think is important to mantain the quality of gameplay when playing locally (alone or even with a couple of friends) because the players won't normally be in more than one or two regions. But even a region can become pretty big, and have a lot of NPC simulating at a time, how do I handle this without screwing the player's experience? Approaches like one server per region and alike are not in the table. I am mainly looking for data structures to hold hordes of enemies, and even peaceful NPC. To finalize the question, please note that vehicles exist, therefore its considerably fast to travel within a region, influencing the "when" to cull areas. Sorry for the confusing question, thanks

  Read the article

< Previous Page | 526 527 528 529 530 531 532 533 534 535 536 537  | Next Page >