Search Results

Search found 21392 results on 856 pages for 'order of operations'.

Page 531/856 | < Previous Page | 527 528 529 530 531 532 533 534 535 536 537 538  | Next Page >

• Random Page Cost and Planning

  - by Dave Jarvis

  A query (see below) that extracts climate data from weather stations within a given radius of a city using the dates for which those weather stations actually have data. The query uses the table's only index, rather effectively: CREATE UNIQUE INDEX measurement_001_stc_idx ON climate.measurement_001 USING btree (station_id, taken, category_id); Reducing the server's configuration value for random_page_cost from 2.0 to 1.1 had a massive performance improvement for the given range (nearly an order of magnitude) because it suggested to PostgreSQL that it should use the index. While the results now return in 5 seconds (down from ~85 seconds), problematic lines remain. Bumping the query's end date by a single year causes a full table scan: sc.taken_start >= '1900-01-01'::date AND sc.taken_end <= '1997-12-31'::date AND How do I persuade PostgreSQL to use the indexes regardless of years between the two dates? (A full table scan against 43 million rows is probably not the best plan.) Find the EXPLAIN ANALYSE results below the query. Thank you! Query SELECT extract(YEAR FROM m.taken) AS year, avg(m.amount) AS amount FROM climate.city c, climate.station s, climate.station_category sc, climate.measurement m WHERE c.id = 5182 AND earth_distance( ll_to_earth(c.latitude_decimal,c.longitude_decimal), ll_to_earth(s.latitude_decimal,s.longitude_decimal)) / 1000 <= 30 AND s.elevation BETWEEN 0 AND 3000 AND s.applicable = TRUE AND sc.station_id = s.id AND sc.category_id = 1 AND sc.taken_start >= '1900-01-01'::date AND sc.taken_end <= '1996-12-31'::date AND m.station_id = s.id AND m.taken BETWEEN sc.taken_start AND sc.taken_end AND m.category_id = sc.category_id GROUP BY extract(YEAR FROM m.taken) ORDER BY extract(YEAR FROM m.taken) 1900 to 1996: Index "Sort (cost=1348597.71..1348598.21 rows=200 width=12) (actual time=2268.929..2268.935 rows=92 loops=1)" " Sort Key: (date_part('year'::text, (m.taken)::timestamp without time zone))" " Sort Method: quicksort Memory: 32kB" " -> HashAggregate (cost=1348586.56..1348590.06 rows=200 width=12) (actual time=2268.829..2268.886 rows=92 loops=1)" " -> Nested Loop (cost=0.00..1344864.01 rows=744510 width=12) (actual time=0.807..2084.206 rows=134893 loops=1)" " Join Filter: ((m.taken >= sc.taken_start) AND (m.taken <= sc.taken_end) AND (sc.station_id = m.station_id))" " -> Nested Loop (cost=0.00..12755.07 rows=1220 width=18) (actual time=0.502..521.937 rows=23 loops=1)" " Join Filter: ((sec_to_gc(cube_distance((ll_to_earth((c.latitude_decimal)::double precision, (c.longitude_decimal)::double precision))::cube, (ll_to_earth((s.latitude_decimal)::double precision, (s.longitude_decimal)::double precision))::cube)) / 1000::double precision) <= 30::double precision)" " -> Index Scan using city_pkey1 on city c (cost=0.00..2.47 rows=1 width=16) (actual time=0.014..0.015 rows=1 loops=1)" " Index Cond: (id = 5182)" " -> Nested Loop (cost=0.00..9907.73 rows=3659 width=34) (actual time=0.014..28.937 rows=3458 loops=1)" " -> Seq Scan on station_category sc (cost=0.00..970.20 rows=3659 width=14) (actual time=0.008..10.947 rows=3458 loops=1)" " Filter: ((taken_start >= '1900-01-01'::date) AND (taken_end <= '1996-12-31'::date) AND (category_id = 1))" " -> Index Scan using station_pkey1 on station s (cost=0.00..2.43 rows=1 width=20) (actual time=0.004..0.004 rows=1 loops=3458)" " Index Cond: (s.id = sc.station_id)" " Filter: (s.applicable AND (s.elevation >= 0) AND (s.elevation <= 3000))" " -> Append (cost=0.00..1072.27 rows=947 width=18) (actual time=6.996..63.199 rows=5865 loops=23)" " -> Seq Scan on measurement m (cost=0.00..25.00 rows=6 width=22) (actual time=0.000..0.000 rows=0 loops=23)" " Filter: (m.category_id = 1)" " -> Bitmap Heap Scan on measurement_001 m (cost=20.79..1047.27 rows=941 width=18) (actual time=6.995..62.390 rows=5865 loops=23)" " Recheck Cond: ((m.station_id = sc.station_id) AND (m.taken >= sc.taken_start) AND (m.taken <= sc.taken_end) AND (m.category_id = 1))" " -> Bitmap Index Scan on measurement_001_stc_idx (cost=0.00..20.55 rows=941 width=0) (actual time=5.775..5.775 rows=5865 loops=23)" " Index Cond: ((m.station_id = sc.station_id) AND (m.taken >= sc.taken_start) AND (m.taken <= sc.taken_end) AND (m.category_id = 1))" "Total runtime: 2269.264 ms" 1900 to 1997: Full Table Scan "Sort (cost=1370192.26..1370192.76 rows=200 width=12) (actual time=86165.797..86165.809 rows=94 loops=1)" " Sort Key: (date_part('year'::text, (m.taken)::timestamp without time zone))" " Sort Method: quicksort Memory: 32kB" " -> HashAggregate (cost=1370181.12..1370184.62 rows=200 width=12) (actual time=86165.654..86165.736 rows=94 loops=1)" " -> Hash Join (cost=4293.60..1366355.81 rows=765061 width=12) (actual time=534.786..85920.007 rows=139721 loops=1)" " Hash Cond: (m.station_id = sc.station_id)" " Join Filter: ((m.taken >= sc.taken_start) AND (m.taken <= sc.taken_end))" " -> Append (cost=0.00..867005.80 rows=43670150 width=18) (actual time=0.009..79202.329 rows=43670079 loops=1)" " -> Seq Scan on measurement m (cost=0.00..25.00 rows=6 width=22) (actual time=0.001..0.001 rows=0 loops=1)" " Filter: (category_id = 1)" " -> Seq Scan on measurement_001 m (cost=0.00..866980.80 rows=43670144 width=18) (actual time=0.008..73312.008 rows=43670079 loops=1)" " Filter: (category_id = 1)" " -> Hash (cost=4277.93..4277.93 rows=1253 width=18) (actual time=534.704..534.704 rows=25 loops=1)" " -> Nested Loop (cost=847.87..4277.93 rows=1253 width=18) (actual time=415.837..534.682 rows=25 loops=1)" " Join Filter: ((sec_to_gc(cube_distance((ll_to_earth((c.latitude_decimal)::double precision, (c.longitude_decimal)::double precision))::cube, (ll_to_earth((s.latitude_decimal)::double precision, (s.longitude_decimal)::double precision))::cube)) / 1000::double precision) <= 30::double precision)" " -> Index Scan using city_pkey1 on city c (cost=0.00..2.47 rows=1 width=16) (actual time=0.012..0.014 rows=1 loops=1)" " Index Cond: (id = 5182)" " -> Hash Join (cost=847.87..1352.07 rows=3760 width=34) (actual time=6.427..35.107 rows=3552 loops=1)" " Hash Cond: (s.id = sc.station_id)" " -> Seq Scan on station s (cost=0.00..367.25 rows=7948 width=20) (actual time=0.004..23.529 rows=7949 loops=1)" " Filter: (applicable AND (elevation >= 0) AND (elevation <= 3000))" " -> Hash (cost=800.87..800.87 rows=3760 width=14) (actual time=6.416..6.416 rows=3552 loops=1)" " -> Bitmap Heap Scan on station_category sc (cost=430.29..800.87 rows=3760 width=14) (actual time=2.316..5.353 rows=3552 loops=1)" " Recheck Cond: (category_id = 1)" " Filter: ((taken_start >= '1900-01-01'::date) AND (taken_end <= '1997-12-31'::date))" " -> Bitmap Index Scan on station_category_station_category_idx (cost=0.00..429.35 rows=6376 width=0) (actual time=2.268..2.268 rows=6339 loops=1)" " Index Cond: (category_id = 1)" "Total runtime: 86165.936 ms"

  Read the article

• SQLite - a smart way to remove and add new objects

  - by Ilya

  Hi, I have a table in my database and I want for each row in my table to have an unique id and to have the rows named sequently. For example: I have 10 rows, each has an id - starting from 0, ending at 9. When I remove a row from a table, lets say - row number 5, there occurs a "hole". And afterwards I add more data, but the "hole" is still there. It is important for me to know exact number of rows and to have at every row data in order to access my table arbitrarily. There is a way in sqlite to do it? Or do I have to manually manage removing and adding of data? Thank you in advance, Ilya.

  Read the article

• Parsing complex string using regex

  - by wojtek_z

  My regex skills are not very good and recently a new data element has thrown my parser into a loop Take the following string "+USER=Bob Smith-GROUP=Admin+FUNCTION=Read/FUNCTION=Write" Previously I had the following for my regex : [+\\-/] Which would turn the result into USER=Bob Smith GROUP=Admin FUNCTION=Read FUNCTION=Write FUNCTION=Read But now I have values with dashes in them which is causing bad output New string looks like "+USER=Bob Smith-GROUP=Admin+FUNCTION=Read/FUNCTION=Write/FUNCTION=Read-Write" Which gives me the following result , and breaks the key = value structure. USER=Bob Smith GROUP=Admin FUNCTION=Read FUNCTION=Write FUNCTION=Read Write Can someone help me formulate a valid regex for handling this or point me to some key / value examples. Basically I need to be able to handle + - / signs in order to get combinations.

  Read the article

• How to Redraw or Refresh a screen

  - by viky

  I am working on a wpf application. Here I need to use System.Windows.Forms.FolderBrowserDialog in my Wpf application. System.Windows.Forms.FolderBrowserDialog openFolderBrowser = new System.Windows.Forms.FolderBrowserDialog(); openFolderBrowser.Description = "Select Resource Path:"; openFolderBrowser.RootFolder = Environment.SpecialFolder.MyComputer; if (openFolderBrowser.ShowDialog() == System.Windows.Forms.DialogResult.OK) { //some logic } when I select a Folder and click OK, I launch another System.Windows.Forms.FolderBrowserDialog with same code, My problem is when I select a Folder and click OK, the shadow of FolderBrowserDialog remains on the screen(means my screen doesn't refresh). I need to minimize or resize it in order to remove the shadow of FolderBrowserDialog. How can I solvet his issue? Any help plz?

  Read the article

• Delving into design patterns, and what that means for the Oracle user experience

  - by Kathy.Miedema

  By Kathy Miedema, Oracle Applications User Experience George Hackman, Senior Director, Applications User Experiences The Oracle Applications User Experience team has some exciting things happening around Fusion Applications design patterns. Because we’re hoping to have some new offerings soon (stay tuned with VoX to see what’s in the pipeline around Fusion Applications design patterns), now is a good time to talk more about what design patterns can do for the individual user as well as the entire company. George Hackman, Senior Director of Operations User Experience, says the first thing to note is that user experience is not just about the user interface. It’s about understanding how people do things, observing them, and then finding the patterns that emerge. The Applications UX team develops those patterns and then builds them into Oracle applications. What emerges, Hackman says, is a consistent, efficient user experience that promotes a productive workplace. Creating design patterns What is a design pattern in the context of enterprise software? “Every day, people use technology to get things done,” Hackman says. “They navigate a virtual world that reaches from enterprise to consumer apps, and from desktop to mobile. This virtual world is constantly under construction. New areas are being developed and old areas are being redone. As this world is being built and remodeled, efficient pathways and practices emerge. “Oracle's user experience team watches users navigate this world. We measure their productivity and ask them about their satisfaction. We take the most efficient, most productive pathways from the enterprise and consumer world and turn them into Oracle's user experience patterns.” Hackman describes the process as combining all of the best practices from every part of a user’s world. Members of the user experience team observe, analyze, design, prototype, and measure each work task to find the best possible pattern for a particular work flow. As the team builds the patterns, “we make sure they are fully buildable using Oracle technology,” Hackman said. “So customers know they can use these patterns. There’s no need to make something up from scratch, not knowing whether you can even build it.” Hackman says that creating something on a computer is a good example of a user experience pattern. “People are creating things all the time,” he says. “On the consumer side, they are creating documents. On the enterprise side, they are creating expense reports. On a mobile phone, they are creating contacts. They are using different apps like iPhone or Facebook or Gmail or Oracle software, all doing this creation process.” The Applications UX team starts their process by observing how people might create something. “We observe people creating things. We see the patterns, we analyze and document, then we apply them to our products. It might be different from phone to web browser, but we have these design patterns that create a consistent experience across platforms, and across products, too. The result for customers Oracle constantly improves its part of the virtual world, Hackman said. New products are created and existing products are upgraded. Because Oracle builds user experience design patterns, Oracle's virtual world becomes both more powerful and more familiar at the same time. Because of design patterns, users can navigate with ease as they embrace the latest technology – because it behaves the way they expect it to. This means less training and faster adoption for individual users, and more productivity for the business as a whole. Hackman said Oracle gives customers and partners access to design patterns so that they can build in the virtual world using the same best practices. Customers and partners can extend applications with a user experience that is comfortable and familiar to their users. For businesses that are integrating different Oracle applications, design patterns are key. The user experience created in E-Business Suite should be similar to the user experience in Fusion Applications, Hackman said. If a user is transitioning from one application to the other, it shouldn’t be difficult for them to do their work. With design patterns, it isn’t. “Oracle user experience patterns are the building blocks for the virtual world that ensure productivity, consistency and user satisfaction,” Hackman said. “They are built for the enterprise, but incorporate the best practices from across the virtual world. They empower productivity and facilitate social interaction. When you build with patterns, you get all the end-user benefits of less training / retraining from the finished product. You also get faster / cheaper development.” What’s coming? You can already access design patterns to help you build Dashboards with OBIEE here. And we promised you at the beginning that we had something in the pipeline on Fusion Applications design patterns. Look for the announcement about when they are available here on VoX.

  Read the article

• postgres - ERROR: syntax error at or near "COST"

  - by cino21122

  EDIT Taking COST 100 out made the command go through, however, I'm still unable to run my query because it yields this error: ERROR: function group_concat(character) does not exist HINT: No function matches the given name and argument types. You may need to add explicit type casts. The query I'm running is this: select tpid, group_concat(z) as z, group_concat(cast(r as char(2))) as r, group_concat(to_char(datecreated,'DD-Mon-YYYY HH12:MI am')) as datecreated, group_concat(to_char(datemodified,'DD-Mon-YYYY HH12:MI am')) as datemodified from tpids group by tpid order by tpid, zip This function seems to work fine locally, but moving it online yields this error... Is there something I'm missing? CREATE OR REPLACE FUNCTION group_concat(text, text) RETURNS text AS $BODY$ SELECT CASE WHEN $2 IS NULL THEN $1 WHEN $1 IS NULL THEN $2 ELSE $1 operator(pg_catalog.||) ',' operator(pg_catalog.||) $2 END $BODY$ LANGUAGE 'sql' IMMUTABLE COST 100; ALTER FUNCTION group_concat(text, text) OWNER TO j76dd3;

  Read the article

• Open World Day 3

  - by Antony Reynolds

  A Day in the Life of an Oracle OpenWorld Attendee Part IV My third day was exhibition day for me!  I took the opportunity to wander around the JavaOne and OpenWorld exhibitions to see what might be useful for me when selling WebLogic, Coherence & SOA Suite.  I found a number of interesting vendors and thought I would share what I found here.  These are not necessarily endorsements, but observations on companies that I thought had interesting looking products that fill a need I have seen at customers. Highly Available EBS Upgrades A few years ago I worked with a customer that was a port authority.  They wanted to tie E-Business Suite into their operations to provide faster processing of cargo and passengers.  However they only had a 2 hour downtime window to perform upgrades.  This was not a problem for core database and middleware technology, this could accommodate those upgrade timescales easily.  It was a problem for EBS however so I intrigued to find Rapid E-Suite Inc offering an 11i to 12i upgrade service that claims to require no outage.  This could be a real boon to EBS customers like my port friends that need to upgrade without disruption to their business. Mobile on WebLogic I have come across a number of customers who want a comprehensive mobile solution, connected and disconnected operation and so forth.  ADF only addresses part of these requirements currently so I was excited to discover mFrontiers Inc offering an apparently comprehensive solution that should integrate easily with Oracle SOA Suite to mobile enable a SOA infrastructure.  The ability to operate without a network is important for many applications, particularly in industries that require their engineers to enter buildings to perform maintenance or repairs, because network access is not always available – many of my colleagues don’t have mobile access from their homes because they live in the middle of nowhere – and disconnected support is crucial in these situations. Sharepoint Connector for WebCenter Content Obviously Sharepoint is an evil pernicious intrusion into a companies IT estate but it is widely deployed and many people like it but also would like to take advantage of Oracle products such as WebCenter Content.  So I was encouraged to see that Fishbowl Solutions have created a connector for Sharepoint that allows it to bring in content from WebCenter, it looks like a valuable way to maintain the Sharepoint interface end users are used to but extend the range of content by pulling stuff (technical term for content) from WebCenter.   Load Balancing The Enterprise Deployment Guides are Oracles bible on building highly available FMW environments, and each of them requires a front end load balancer.  I have been asked to help configure F5 Load Balancers on a number of occasions over my time at Oracle and each time I come back to it I find more useful features have been added to the BigIP line of load balancers that F5 sell, many of their documents are tailored to FMW.  I like F5, they provide (relatively) easy to use products that do what they say on the side of the box.  They may not have all the bells and whistles of some of their more expensive competitors but they do the job and do it well!  Besides which I like their logo! Other Stuff I saw lots of other interesting products and services, such as a lightweight monitoring tool for Coherence, Forms migration services, JCAPS migration services and lots of cool freebies to take home to the children! A Quiet Night Wednesday night was the partner appreciation event and I had decided to go back to the hotel and have an early night.  I decided to attend the last session of the day – a Maven/Hudson/WebLogic tutorial.  I got the wrong hotel for the session and snuck in 20 minutes late at the back and starting working on the hands on workshop.  One of my co-attendees raised his hand for help and as the presenter came over to help he suddenly stopped and yelled – “Is that Antony”!  It was my old friend Steve Button who used to be based in Redwood Shores but is now a WebLogic guru PM in Australia.  It was good to catch up with him.  As he yelled out a guy with really bad posture turned around to see who he was talking to, this turned out to be my friend Simon Haslan, Oracle ACE from the UK.  After the tutorial Simon and I retired to the coffee shop to catch up and share stories.  2 and half hours later we decided it was time to retire, so much for an early night but great to renew old friendships and find out what real customers are worrying about.

  Read the article

• ISACA Webcast follow up: Managing High Risk Access and Compliance with a Platform Approach to Privileged Account Management

  - by Darin Pendergraft

  Last week we presented how Oracle Privileged Account Manager (OPAM) could be used to manage high risk, privileged accounts.  If you missed the webcast, here is a link to the replay: ISACA replay archive (NOTE: you will need to use Internet Explorer to view the archive) For those of you that did join us on the call, you will know that I only had a little bit of time for Q&A, and was only able to answer a few of the questions that came in.  So I wanted to devote this blog to answering the outstanding questions.  Here they are. 1. Can OPAM track admin or DBA activity details during a password check-out session? Oracle Audit Vault is monitoring these activities which can be correlated to check-out events. 2. How would OPAM handle simultaneous requests? OPAM can be configured to allow for shared passwords.  By default sharing is turned off. 3. How long are the passwords valid?  Are the admins required to manually check them in? Password expiration can be configured and set in the password policy according to your corporate standards.  You can specify if you want forced check-in or not. 4. Can 2-factor authentication be used with OPAM? Yes - 2-factor integration with OPAM is provided by integration with Oracle Access Manager, and Oracle Adaptive Access Manager. 5. How do you control access to OPAM to ensure that OPAM admins don't override the functionality to access privileged accounts? OPAM provides separation of duties by using Admin Roles to manage access to targets and privileged accounts and to control which operations admins can perform. 6. How and where are the passwords stored in OPAM? OPAM uses Oracle Platform Security Services (OPSS) Credential Store Framework (CSF) to securely store passwords.  This is the same system used by Oracle Applications. 7. Does OPAM support hierarchical/level based privileges?  Is the log maintained for independent review/audit? Yes. OPAM uses the Fusion Middleware (FMW) Audit Framework to store all OPAM related events in a dedicated audit database.  8. Does OPAM support emergency access in the case where approvers are not available until later? Yes.  OPAM can be configured to release a password under a "break-glass" emergency scenario. 9. Does OPAM work with AIX? Yes supported UNIX version are listed in the "certified component section" of the UNIX connector guide at:http://docs.oracle.com/cd/E22999_01/doc.111/e17694/intro.htm#autoId0 10. Does OPAM integrate with Sun Identity Manager? Yes.  OPAM can be integrated with SIM using the REST  APIs.  OPAM has direct integration with Oracle Identity Manager 11gR2. 11. Is OPAM available today and what does it cost? Yes.  OPAM is available now.  Ask your Oracle Account Manager for pricing. 12. Can OPAM be used in SAP environments? Yes, supported SAP version are listed in the "certified component section" of the SAP  connector guide here: http://docs.oracle.com/cd/E22999_01/doc.111/e25327/intro.htm#autoId0 13. How would this product integrate, if at all, with access to a particular field in the DB that need additional security such as SSN's? OPAM can work with DB Vault and DB Firewall to provide the fine grained access control for databases. 14. Is VM supported? As a deployment platform Oracle VM is supported. For further details about supported Virtualization Technologies see Oracle Fusion Middleware Supported System configurations here: http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html 15. Where did this (OPAM) technology come from? OPAM was built by Oracle Engineering. 16. Are all Linux flavors supported?  How about BSD? BSD is not supported. For supported UNIX version see the "certified component section" of the UNIX connector guide http://docs.oracle.com/cd/E22999_01/doc.111/e17694/intro.htm#autoId0 17. What happens if users don't check passwords in at the end of a work task? In OPAM a time frame can be defined how long a password can be checked out. The security admin can force a check-in at any given time. 18. is MySQL supported? Yes, supported DB version are listed in the "certified component section" of the DB connector guide here: http://docs.oracle.com/cd/E22999_01/doc.111/e28315/intro.htm#BABGJJHA 19. What happens when OPAM crashes and you need to use the password? OPAM can be configured for high availability, but if required, OPAM data can be backed up/recovered.  See the OPAM admin guide. 20. Is OPAM Standalone product or does it leverage other components from IDM? OPAM can be run stand-alone, but will also leverage other IDM components

  Read the article

• Is it possible to have a JPanel over JTable

  - by YuppieNetworking

  Hello, I have a JTable whose associated TableModel could be initially empty. Therefore, it currently shows a JTable with its columns and no rows. In order to fill this JTable, I want the user to drag and drop elements from another component. The problem is that I would like to hint the user that he/she should drag elements to this table, with some message like "Drag xxx here to add a row". I thought that I could achieve this by putting a panel over the JTable , but I don't think it is possible with any java layout. Does anyone know how to do this? Or should I stick to a CardLayout to switch to/from the hint and the JTable? Thanks a lot

  Read the article

• SOA Suite 11g Dynamic Payload Testing with soapUI Free Edition

  - by Greg Mally

  Overview Many web service developers use soapUI for various tests like: smoke test, unit test, and load testing because you can get a free edition that is fairly robust. However, if you need to venture into more complex testing that requires a dynamic payload, then the free edition doesn't necessarily make it easy. This feature does exist in soapUI, but for obvious reasons it is in the Pro version. In this blog I will show you how to use soapUI free edition for dynamic payloads in a simplified example. Hopefully this will open the doors for you to expand into more complex scenarios. The following assumes that you have a working knowledge of soapUI and will not go into concepts like setting up a project etc. For the basics, please review the documentation for soapUI: http://www.soapui.org/Getting-Started/. Additionally, we will be using asynchronous web services and you can review the setup for this in my blog: SOA Suite 11g Asynchronous Testing with soapUI. Features in soapUI Free Edition Relating to this Topic The soapUI test tool provides a very feature rich environment that can do many things provided you are willing to go beyond point and click. For this example, we will be leveraging just a couple features for our dynamic payload example: Test Case Properties Scripting with Groovy Basically, we will be using a property as a global variable and we will manipulate that property using a Groovy script. Setting Up Our Property Properties are available throughout soapUI and here is a snippet from the soapUI website defining the locations: Projects : for handling Project scope values, for example a subscription ID TestSuite : for handling TestSuite scoped values, can be seen as "arguments" to a TestSuite TestCases : for handling TestCase scoped values, can be seen as "arguments" to a TestCase Properties TestStep : for providing local values/state within a TestCase Local TestStep properties : several TestStep types maintain their own list of properties specific to their functionality : DataSource, DataSink, Run TestCase MockServices : for handling MockService scoped values/arguments MockResponses : for handling MockResponse scoped values Global Properties : for handling Global properties, optionally from an external source For our example, we will be defining a custom property in a TestCase called SimpleAsyncPayload. The property can be created in either the Custom Properties tab located at the bottom of the Navigator panel when the TestCase is selected in the Navigator or the Properties label in the TestCase editor: Navigator Panel TestCase Editor You will notice that I set a value of “0” for the custom property. For this simplified example, we will need to retrieve that value and manipulate it prior to making the web service request invocation. In order to accomplish this, we will need to get Groovy ;) Let's Get Groovy We will now add a new Groovy Script step to the TestCase called Manipulate Payload: TestCase Editor > Append Step > Groovy Script Once we have added the Groovy Script step to our TestCase, we can open the Groovy Script editor to add the code to: Get the current value of the property we created called SimpleAsyncPayload. Convert the value of the property to an integer. Increment the value. Store the incremented value back into the TestCase property called SimpleAsyncPayload. The script should look something like the following: Groovy Script Editor – Manipulate Payload At this point we can test the script to see if it is working by simply running the TestCase (left-click on the green triangle in the upper left-hand corner of the TestCase editor). To verify if it ran correctly, we can look at the value of the SimpleAsyncPayload property which should now be 1: TestCase Editor – Run Results All that is left to complete the TestCase is to append another step of type Test Request. The information required to append the request is a name and an operation to invoke. In this example we will use the default name and select the SimpleAsyncBPELProcessBingd -> process as the operation (any other information being requested, simply use the defaults unless you are calling an asynchronous operation then do not add any assertions). We are now in familiar ground with the Test Request editor. Depending upon the type of operation you are invoking (synchronous or asynchronous), please update the request with the necessary information (e.g., callback information for asynchronous operations). We will now tweak the Test Request payload to retrieve the value of the SimpleAsyncPayload property. The soapUI editor makes this very simple: right-click in the payload and navigate to the property (e.g., right-click > Get Data.. > TestCase: [Groovy TestCase] > Property [SimpleAsyncPayload]): Test Request Editor – Insert Property Value Your payload should now look something like the following: Test Request Editor – Inserted Property Value Just like before, we are now ready to run the TestCase. If everything goes as expected we should see a response like the following: Message Viewer – Results of TestCase Run We are now setup to be able to run a stress test where the payload will change for each request. This simple example can be expanded to include multiple payload values, complex calculations in the scripts, or whatever can be done via the soapUI scripting. Hopefully you have found this useful and happy testing to you :)

  Read the article

• Recursion problem in C

  - by jake

  Hi there. I've been trying to solve this problem for a few days now but it seems I haven't grasped the concept of recursion,yet. I have to build a program in C (recursion is a must here but loops are allowed as well) which does the following: The user inputs 2 different strings.For example: String 1 - ABC String 2 - DE The program is supposed to print strings which are combined of the ones the user has entered. the rule is that the inner order of the letters in each string (1&2) must remain. That's the output for string1=ABC & string2=DE ": abcde abdce abdec adbce adbec adebc dabce dabec daebc deabc If anyone could give me a hand here, it would be great. Thanks guys.

  Read the article

• jQuery UI Datepicker on a qTip

  - by Justin Ethier

  I am trying to display a qTip containing a jQuery UI datepicker control (the version bundled with jQuery UI). However the datepicker's calendar opens behind the qTip. I tried manually setting the calendar's z-order from firebug, which does allow the calendar to open in front of the qTip. However, in this case clicking on the calendar has the effect of closing the qTip as (I assume) it is part of the page's content. I am still working through this but wanted to ask - has anyone run into this problem before? Any possible workarounds to get the datepicker to work?

  Read the article

• insertRecord into QSqlTableModel fails, but item appears in QListView

  - by Anteru

  I got a pretty weird problem with a QSqlTableModel. The underlying SQL Database has a constraint Title UNIQUE. If I add a record which violates the constraint using insertRecord, the call fails (return value is false.) However, the view which uses the model displays the entry -- I have to manually remove it in order to get rid of it. How can I change this so the view does not get updated when an insertRecord fails? I would have assumed that the view gets only updated if there is really a change ...

  Read the article

• Gems and Ubuntu 9.04

  - by jules

  Hi, I recently upgraded to Ubuntu 9.04 and I have issues using gems. I have installed ruby, ruby gems and rails using apt-get The rails command do work. I have then installed capistrano and other gems (such as heroku). In order to do that, I have used the command sudo gem install XXX When I want to use the cap command it does not work: bash: cap: command not found It is the same with the other gem commands. Do I have something particular to do so that the gem commands works ?

  Read the article

• How do you unit test web page authorization using ASP.NET MVC?

  - by Kevin Pang

  Let's say you have a profile page that can only be accessed by the owner of that profile. This profile page is located at: User/Profile/{userID} Now, I imagine in order to prevent access to this page by other users, you could structure your UserController class's Profile function to check the current session's identity: HttpContext.Current.User.Identity.Name If the id matches the one in the url, then you proceed. Otherwise you redirect to some sort of error page. My question is how do you unit test something like this? I'm guessing that you need to use some sort of dependency injection instead of the HttpContext in the controller to do the check on, but I am unclear what the best way to do that is. Any advice would be helpful.

  Read the article

• How to get the ObjectId value from MongoDB?

  - by LVarayut

  I'm using Jongo with Play framework 2, java. I added some data into my MongoDB. {"_id" : ObjectId("538dafffbf6b562617252178"), ... } However, when I fetched the ObjectId from the database, it gave me like: de.undercouch.bson4jackson.types.ObjectId@484431ff instead of 538dafffbf6b562617252178. I don't quite understand how can I get the ObjectId value. My class is defined as following: public class Product { @JsonProperty("_id") protected String id; ... public Product() { } public String getId() { return id; } public void setId(String id) { this.id = id; } } EDIT In order to fetch the data, I simply use find() function provided by Jongo as following: public static Iterable<Product> findAll(){ return products().find().as(Product.class); }

  Read the article

• Sending a file from my application (Indy/Delphi) to an ASP page and then onto another server (Amazon

  - by user89691

  I have a need to store files on Amazon AWS S3, but in order to isolate the user from the AWS authentication I want to go via an ASP page on my site, which the user will be logged into. So: The application sends the file using the Delphi Indy library TidHTTP.Put (FileStream) routine to the ASP page, along with some authentication stuff (mine, not AWS) on the querystring. The ASP page checks the auth details and then if OK stores the file on S3 using my Amazon account. Problem I have is: how do I access the data coming in from the Indy PUT using JScript in the ASP page and pass it on to S3. I'm OK with AWS signing, etc, it's just the nuts and bolts of connecting the two bits (the incoming request and the outgoing AWS request) ... TIA R

  Read the article

• Batch View updates

  - by Terry

  I want to load a bunch of view definitions into SQL Server 2005 & 2008. I am using IF/ELSE logic to dynamically building Create or Alter statements that I then EXEC. This works fine. However, unless I get the order of the statements correct, I get errors if a view is dependent on another view that would be created in a later statement. Is there a way to turn of the valiation of the SQL statements until after they have all been entered? It seems like the worst of both worlds. SQL Server does late binding and so it won't propogate changes to tables and views, but you can't create a view without all the pieces being in place.

  Read the article

• Reinforcement learning with neural networks

  - by Betamoo

  I am working on a project with RL & NN I need to determine the action vector structure which will be fed to a neural network.. I have 3 different actions (A & B & Nothing) each with different powers (e.g A100 A50 B100 B50) I wonder what is the best way to feed these actions to a NN in order to yield best results? 1- feed A/B to input 1, while action power 100/50/Nothing to input 2 2- feed A100/A50/Nothing to input 1, while B100/B50/Nothing to input 2 3- feed A100/A50 to input 1, while B100/B50 to input 2, while Nothing flag to input 3 4- Also to feed 100 & 50 or normalize them to 2 & 1 ? I need reasons why to choose one method Any suggestions are recommended Thanks

  Read the article

• Can Cython compile to an EXE?

  - by ThantiK

  I know what Cythons purpose is. It's to write compilable C extensions in a Python-like language in order to produce speedups in your code. What I would like to know (and can't seem to find using my google-fu) is if Cython can somehow compile into an executable format since it already seems to break python code down into C. I already use Py2Exe, which is just a packager, but am interested in using this to compile down to something that is a little harder to unpack (Anything packed using Py2EXE can basically just be extracted using 7zip which I do not want) It seems if this is not possible my next alternative would just be to compile all my code and load it as a module and then package that using py2exe at least getting most of my code into compiled form, right?

  Read the article

• XIB-instantiated Object's IBOutlet is nil

  - by jxpx777

  I have a XIB set up like in this screenshot: File's owner is my main window controller. The XIB is also in charge of creating an object that serves as the delegate for the MGScopeBar view. As you can see in the screenshot, the scope bar delegate has an IBOutlet for the search field so that it can return it as an extra view as part of the delegate process. The problem I'm having is that when the delegate object is queried for the accessory view, the IBOutlet NSSearchField is nil. I'm fairly certain this has something to do with the order that objects are created, IBOutlets wired, etc, but I'm just a little lost as to where in the process I can expect the search field to exist so that the scope bar delegate can reference it properly. Thanks in advance for any pointers.

  Read the article

• CodePlex Daily Summary for Sunday, November 13, 2011

  CodePlex Daily Summary for Sunday, November 13, 2011Popular ReleasesT.S.T. the T-SQL Test Tool: Version 1.8: Implement the Assert.Ignore API. Fix a bug: A test session is reported as passing if only the test session setup or test session teardown failed. Improve the text and xml output when test session setup/teardown are present. Allow users to customize the prefix "SQLTest_".VidCoder: 1.2.2: Updated Handbrake core to svn 4344. Fixed the 6-channel discrete mixdown option not appearing for AAC encoders. Added handling for possible exceptions when copying to the clipboard, added retries and message when it fails. Fixed issue with audio bitrate UI not appearing sometimes when switching audio encoders. Added extra checks to protect against reported crashes. Added code to upgrade encoding profiles on old queued items.Dynamic PagedCollection (Silverlight / WPF Pagination): PagedCollection: All classes which facilitate your dynamic pagination in Silverlight or WPF !Media Companion: MC 3.422b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) TV Show Resolutions... Made the TV Shows folder list sorted. Re-visibled 'Manually Add Path' in Root Folders. Sorted list to process during new tv episode search Rebuild Movies now processes thru folders alphabetically Fix for issue #208 - Display Missing Episodes is not popu...DotSpatial: DotSpatial Release Candidate 1 (1.0.823): Supports loading extensions using System.ComponentModel.Composition. DemoMap compiled as x86 so that GDAL runs on x64 machines. How to: Use an Assembly from the WebBe aware that your browser may add an identifier to downloaded files which results in "blocked" dll files. You can follow the following link to learn how to "Unblock" files. Right click on the zip file before unzipping, choose properties, go to the general tab and click the unblock button. http://msdn.microsoft.com/en-us/library...XPath Visualizer: XPathVisualizer v1.3 Latest: This is v1.3.0.6 of XpathVisualizer. This is an update release for v1.3. These workitems have been fixed since v1.3.0.5: 7429 7432 7427MSBuild Extension Pack: November 2011: Release Blog Post The MSBuild Extension Pack November 2011 release provides a collection of over 415 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GU...CODE Framework: 4.0.11110.0: Various minor fixes and tweaks.Extensions for Reactive Extensions (Rxx): Rxx 1.2: What's NewRelated Work Items Please read the latest release notes for details about what's new. Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many useful types such as ViewModel, CommandSubject, ListSubject, DictionarySubject, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T> and others. Various interactive labs that illustrate the runtime behavior of the extensio...Player Framework by Microsoft: HTML5 Player Framework 1.0: Additional DownloadsHTML5 Player Framework Examples - This is a set of examples showing how to setup and initialize the HTML5 Player Framework. This includes examples of how to use the Player Framework with both the HTML5 video tag and Silverlight player. Note: Be sure to unblock the zip file before using. Note: In order to test Silverlight fallback in the included sample app, you need to run the html and xap files over http (e.g. over localhost). Silverlight Players - Visit the Silverlig...MapWindow 4: MapWindow GIS v4.8.6 - Final release - 64Bit: What’s New in 4.8.6 (Final release)A few minor issues have been fixed What’s New in 4.8.5 (Beta release)Assign projection tool. (Sergei Leschinsky) Projection dialects. (Sergei Leschinsky) Projections database converted to SQLite format. (Sergei Leschinsky) Basic code for database support - will be developed further (ShapefileDataClient class, IDataProvider interface). (Sergei Leschinsky) 'Export shapefile to database' tool. (Sergei Leschinsky) Made the GEOS library static. geos.dl...Facebook C# SDK: v5.3.2: This is a RTW release which adds new features and bug fixes to v5.2.1. Query/QueryAsync methods uses graph api instead of legacy rest api. removed dependency from Code Contracts enabled Task Parallel Support in .NET 4.0+ (experimental) added support for early preview for .NET 4.5 (binaries not distributed in codeplex nor nuget.org, will need to manually build from Facebook-Net45.sln) added additional method overloads for .NET 4.5 to support IProgress<T> for upload progress added ne...Delete Inactive TS Ports: List and delete the Inactive TS Ports: UPDATEAdded support for windows 2003 servers and removed some null reference errors when the registry key was not present List and delete the Inactive TS Ports - The InactiveTSPortList.EXE accepts command line arguments The InactiveTSPortList.Standalone.WithoutPrompt.exe runs as a standalone exe without the need for any command line arguments.ClosedXML - The easy way to OpenXML: ClosedXML 0.60.0: Added almost full support for auto filters (missing custom date filters). See examples Filter Values, Custom Filters Fixed issues 7016, 7391, 7388, 7389, 7198, 7196, 7194, 7186, 7067, 7115, 7144Microsoft Research Boogie: Nightly builds: This download category contains automatically released nightly builds, reflecting the current state of Boogie's development. We try to make sure each nightly build passes the test suite. If you suspect that was not the case, please try the previous nightly build to see if that really is the problem. Also, please see the installation instructions.GoogleMap Control: GoogleMap Control 6.0: Major design changes to the control in order to achieve better scalability and extensibility for the new features comming with GoogleMaps API. GoogleMap control switched to GoogleMaps API v3 and .NET 4.0. GoogleMap control is 100% ScriptControl now, it requires ScriptManager to be registered on the pages where and before it is used. Markers, polylines, polygons and directions were implemented as ExtenderControl, instead of being inner properties of GoogleMap control. Better perfomance. Better...WabbitStudio Z80 Software Tools: WabbitCode Mac 2.1: WabbitCode for the Mac version 2.1. You need 10.7 (Lion) to run this. There won't be any further releases for older versions of OS X.Shell Sort Web service and Application: Shell sort Web service and application: Shell Sort WebserviceSharePoint Backup Augmentation Cmdlets: SharePointBAC Technology Preview: This release is purely an opportunity for administrators who live on the bleeding-edge to "kick the tires." Only two cmdlets are available: Get-SPBackupCatalog and Remove-SPBackupCatalog. Both of these cmdlets are fully functional and documented in their current form, but the cmdlets have seen little testing and real-world use thus far. The code, capabilities, and reliability of this project will evolve in the weeks and months ahead, but for now you should avoid deploying these cmdlets to pro...WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: V2.1: Version 2.1 (click on the right) this uses V4.0 of .net Version 2.1 adds the following features: (apologize if I forget some, added a lot of little things) Manual Lookup with TV or Movie (finally huh!), you can look up a movie or TV episode directly, you can right click on anythign, and choose manual lookup, then will allow you to type anything you want to look up and it will assign it to the file you right clicked. No Rename: a very popular request, this is an option you can set so that t...New ProjectsBTG - Bilateral Tower Guardians: BIEN TA GROTTEc# Extended Link List: The ExtendedLinkList Graffiti CMS Widget is a C# port of an existing widget by Curt C at http://www.codeplex.com/ExtendedLinkListCodePubs: codepubs DegradingLoad: DegradingLoad will attempt to load a process serverside async; if it takes too long it will "degrade" to using clientside ajax to retrieve the result without blocking the main page contentDino: Dino is a simple ORM wrapper framework that provides a consistent set of interfaces for working with a variety of ORMs in a single Unit of Work. Dino is built to be extremely lightweight, with built in support for abstracting away some of the intricicies of using various ORMs.Elenoire: Elenoire is a live bot assistant for everyday that takes a appointment and note for you, the bot work when you are not present on messenger. Fontus: Fontus è un sistema centralizzato per l’erogazione di contenuti informativi. Il sistema Fontus si basa su un meccanismo di plug-in per rendere l’insieme delle fonti estendibile. FoolFish.CodeBase: implement your especial ideas...FullonSMS Desktop Client: Send free sms using fullonsms by this software to anywhere in India, supports grouping and contacts feature. Developed by Ayush PateriaInterface Interceptor: Allows you to filter and intercept interface methods.NBouncer: NBouncer is a Context Aware Validation framework without attributes for .NET 3.5 Winforms, WPF, Silverlight or Asp.NET MVCNetShips: Simple network battleship game for 2 players.Nhung Nai Website: phát tri?n Nhung Nai WebisteOpenCV2.2 Project template For Visual Studio 2010: The intension of the project is to make your life little easier if you use OpenCV2.2. As i couldn't find a project template for OpenCV, I decided to publish it on codeplex. Hope it will help at least some of you.Projeto de Compiladores: Projeto de Compiladores da Unicap 2011.2sejce2008: jce se course wiki and projects linksSharpener: Sharpener is a simple optimizer for .NET and Mono.Simple Live Screen: Simple Live Screen's target is to fasten screen transmits by using it's own protocol. This program is being developed in C#.Simple Note XML - ASP.NET User Control: Simple Note XML makes it easier for ASP.NET Developers to build lists. You'll no longer have to write things down. It's developed in ASP.NET 2.0 C#. SquadLead for Tasks - Community Edition: SquadLead Tasks Community Edition is a PostGreSQL based Task Management software for teams, with wonderful time and resource allocation abilities. Unlinke Gannt charting and dependency abilities, SquadLead gives a flexibility to create ad-hoc tasks with no dependencies and hence suits many different kind of projects in a versatile way. If you take care of dependencies, it takes care of helping you with identifying allocation loads, reports and graphs. Features Task Management and...Stanford db-class algorithms: The algorithms of the relational db theory, described in the introduction to databases Stanford class (www.db-class.org).tfsProjectInitialiser: After creating a Team Project, load the initial state of the project - complete with Areas, Iterations, Work Items - quickly and easily. I am on my one on this so far, so any help or contribution would be appreciated.

  Read the article

• jQuery prevent.default stops rest of code working

  - by Tim

  Hey all I have this code where I am using jQuery to navigate to the next page, because I want some effects to take place before that happens. The problem is, that everything after the prevent.Default(); doesn't seem to work! $("a").click(function(event){ event.preventDefault(); $(".content-center").animate({height: "0px"}, 500); navigate($(this).attr('href')); }); I need things to happen in that order, so that the animation happens and once it's complete - load the next page... Does anyone have any ideas? Many thanks in advance? Tim

  Read the article

• Compare two String with MySQL

  - by Scorpi0

  Hi, I wan't to compare two strings in a SQL request so I can retrieve the best match, the aim is to propose to an operator the best zip code possible. For example, in France, we have Integer Zip code, so I made an easy request : SELECT * FROM myTable ORDER BY abs(zip_code - 75000) This request returns first the data closest of Paris. Unfortunatelly, United Kingdom have zip code like AB421RS, so my request can't do it. I see in SQL Server a function 'Difference' : http://www.java2s.com/Code/SQLServer/String-Functions/DIFFERENCEworkoutwhenonestringsoundssimilartoanotherstring.htm But I use MySQL.. Is there anyone who have a good idea to do the trick in one simple request ? PS : the Levenshtein Distance will not do it, as I really wan't to compare string like if they were number. ABCDEF have to be closer to AWXYZ than to ZBCDEF.

  Read the article

• Five Things Learned at the BSR Conference in San Francisco on Nov 2nd-4th

  - by Evelyn Neumayr

  The BSR Conference 2011—“Redefining Leadership”—held from Nov 2nd to Nov 4th in San Francisco, with Oracle as one of the main sponsors, saw senior business executives, civil society representatives, and other experts from around the world gathering to share strategies and insights on the future of sustainability. The general conference sessions kicked off on November 2nd with a plenary address by former U.S. Vice President Al Gore. Other sessions were presented by CEOs of the caliber of Carl Bass (Autodesk), Brian Dunn (Best Buy), Carlos Brito (Anheuser-Busch InBev) and Ofra Strauss (Strauss Group). Here are five key highlights from the conference: 1.      The main leadership challenge is integrating sustainability into core business functions and overcoming short-termism. The “BSR GlobeScan State of Sustainable Business Poll 2011” - a survey of nearly 500 business leaders from 300 member companies - shows that 84% of respondents are optimistic that global businesses will embrace CSR/sustainability as part of their core strategies and operations in the next five years but consider integrating sustainability into their core business functions the key challenge. It is still difficult for many companies that are committed to the sustainability agenda to find investors that understand the long-term implications and as Al Gore said “Many companies are given the signal by the investors that it is the short term results that matter and that is a terribly debilitating force in the market.” 2.      Companies are required to address increasing compliance requirements and transparency in their supply chain, especially in relation with conflict minerals legislation and water management. The Dodd-Frank legislation, OECD guidelines, and the upcoming Securities and Exchange Commission (SEC) rules require companies to monitor upstream the sourcing of tin, tantalum, tungsten, and gold, but given the complexity of this issue companies need to collaborate and partner with peer companies in their industry as well as in other industries to understand how to address conflict minerals in their supply chains. The Institute of Public and Environmental Affairs’ (IPE) China Water Pollution Map enables the public to access thousands of environmental quality, discharge, and infraction records released by various government agencies. Empowered with this information, the public has the opportunity to place greater pressure on polluting companies to comply with environmental standards and create solutions to improve their performance. 3.      A new standard for reporting on supply chain greenhouse gas emissions is available. The New “Scope 3” Supply Chain Greenhouse Gas Inventory Standard, released on October 4th 2011, is the only international greenhouse gas emissions standard that accounts for the full lifecycle of a company’s products. It provides a framework for companies to account for indirect emissions outside of energy use, such as transportation, manufacturing, and distribution, and it incorporates both upstream and downstream impacts of a product. With key investors now listing supplier vulnerability to rising energy prices and disruptions of service as a key concern, greenhouse gas (GHG) management isn’t just for leading companies but a necessity for any business. 4.      Environmental, social, and corporate governance (ESG) reporting is becoming increasingly important to investors and other stakeholders. While European investors have traditionally driven the ESG agenda, U.S. investors are increasingly including ESG data in their analyses. This trend will likely increase as stakeholders continue to demand that an ESG lens be applied to their investments. Investors are increasingly looking to partner on sustainability, as they see the benefits of ESG providing significant returns on investment. 5.      Software companies are offering an increasing variety of solutions to help drive changes and measure performance internally, in supply chains, and across peer companies. The significant challenge is how to integrate different software systems to facilitate decision-making based on a holistic understanding of trade-offs. Jon Chorley, Chief Sustainability Officer and Vice President, Supply Chain Management Product Strategy at Oracle was a panelist in the “Trends in Sustainability Software” session and commented that, “How we think about our business decisions really comes down to how we think about cost. And as long as we don’t assign a cost to things that have an environmental impact or social impact, then we make decisions based on incomplete information. If we could include that in the process that determines ‘Is this product profitable? we would then have a much better decision.” For more information on BSR visit www.brs.org. You can also view highlights of the plenary session at http://www.bsr.org/en/bsr-conference/session-summaries/2011. Oracle is proud to be a sponsor of this BSR conference. By Elena Avesani, Principal Product Strategy Manager, Oracle          

  Read the article

< Previous Page | 527 528 529 530 531 532 533 534 535 536 537 538  | Next Page >