Search Results

Search found 24755 results on 991 pages for 'linux mom'.

Page 533/991 | < Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >

• Why won't USB 3.0 external hard drive run at USB 3.0 speeds?

  - by jgottula

  I recently purchased a PCI Express x1 USB 3.0 controller card (containing the NEC USB 3.0 controller) with the intent of using a USB 3.0 external hard drive with my Linux box. I installed the card in an empty PCIe slot on my motherboard, connected the card to a power cable, strung a USB 3.0 cable between one of the new ports and my external HDD, and connected the HDD to a wall socket for power. Booting the system, the drive works 100% as intended, with the one exception of throughput: rather than using SuperSpeed 4.8 Gbps connectivity, it seems to be falling back to High Speed 480 Mbps USB 2.0-style throughput. Disk Utility shows it as a 480 Mbps device, and running a couple Disk Utility and dd benchmarks confirms that the drive fails to exceed ~40 MB/s (the approximate limit of USB 2.0), despite it being an SSD capable of far more than that. When I connect my USB 3.0 HDD, dmesg shows this: [ 3923.280018] usb 3-2: new high speed USB device using ehci_hcd and address 6 where I would expect to find this: [ 3923.280018] usb 3-2: new SuperSpeed USB device using xhci_hcd and address 6 My system was running on kernel 2.6.35-25-generic at the time. Then, I stumbled upon this forum thread by an individual who found that a bug, which was present in kernels prior to 2.6.37-rc5, could be the culprit for this type of problem. Consequently, I installed the 2.6.37-generic mainline Ubuntu kernel to determine if the problem would go away. It didn't, so I tried 2.6.38-rc3-generic, and even the 2.6.38 nightly from 2010.02.01, to no avail. In short, I'm trying to determine why, with USB 3.0 support in the kernel, my USB 3.0 drive fails to run at full SuperSpeed throughput. See the comments under this question for additional details. Output that might be relevant to the problem (when booting from 2.6.38-rc3): Relevant lines from dmesg: [ 19.589491] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.589512] xhci_hcd 0000:03:00.0: setting latency timer to 64 [ 19.589516] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 19.589623] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 12 [ 19.650492] xhci_hcd 0000:03:00.0: irq 17, io mem 0xf8100000 [ 19.650556] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 19.650560] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 19.650563] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 19.653946] xHCI xhci_add_endpoint called for root hub [ 19.653948] xHCI xhci_check_bandwidth called for root hub Relevant section of sudo lspci -v: 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f8100000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd Relevant section of sudo lsusb -v: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.38-020638rc3-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:03:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Full, non-verbose lsusb: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 003: ID 04d9:0702 Holtek Semiconductor, Inc. Bus 009 Device 002: ID 046d:c068 Logitech, Inc. G500 Laser Mouse Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 006: ID 174c:5106 ASMedia Technology Inc. Bus 003 Device 004: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 006: ID 1687:0163 Kingmax Digital Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 046d:081b Logitech, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Full output: full dmesg full lspci full lsusb

  Read the article

• Which Ubuntu linux kernel tree matches my installed kernel?

  - by Rmano

  Answering a recent question, and before that, trying to see if a patch which is fundamental for my machine had been included in a kernel release, I have found the following problem: How can I match the kernel version I have for my kernel, which is [:~] % uname -a Linux samsung-romano 3.13.0-29-generic #53-Ubuntu SMP Wed Jun 4 21:00:20 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux with the exact kernel source, which I suppose should be stored in http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=summary? In that page there are quite a lot of tags, for example: But none of them correspond to 3.13.0-29 which is my running kernel right now. The mapping should be in https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable, where it is said that the 3.13 Ubuntu kernel is based on 3.13.11 --- I think. But from there to finding the tree I have installed is not straightforward. Notice: I know I can install the kernel source corresponding with my installed kernel. But I do not want to install them; I would like ti have a pointer to the git tree to be able to browse it online (and check for commits, patches, etc.). The best options seems to go to linux3.13-y.review or linux3.13-y.queue, but I am unable to find where this tree are marked for the release - if I understand well the policy, in -review the patches are accumulated for testing, and in -queue accumulated for the next minor release/update --- but I am unable to find the exact release tree. I mean, a tag equivalent to 3.13.0-29 was cut here.

  Read the article

• CMake can not find PythonLibs

  - by tintin

  I am trying to build inria Graphite on my ubuntu which is running in a VirtualBox simulator, I follow the instructions, and install the python-dev packages, but when I run cmake , still got an error: CMake Error at /usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:108 (message): Could NOT find PythonLibs (missing: PYTHON_LIBRARIES PYTHON_INCLUDE_DIRS) (Required is at least version "3.2") Call Stack (most recent call first): /usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:315 (_FPHSA_FAILURE_MESSAGE) /usr/share/cmake-2.8/Modules/FindPythonLibs.cmake:208 (FIND_PACKAGE_HANDLE_STANDARD_ARGS) src/packages/OGF/gel_python3/CMakeLists.txt:11 (FIND_PACKAGE) I checked the /usr/lib/ and find tintin@tintin-VirtualBox:/usr/lib$ find . -name "libpython*" ./x86_64-linux-gnu/libpython3.4m.so.1.0 ./x86_64-linux-gnu/libpython2.7.so.1.0 ./x86_64-linux-gnu/libpython3.4m.a ./x86_64-linux-gnu/libpython2.7.a ./x86_64-linux-gnu/libpython3.4m.so ./x86_64-linux-gnu/libpython2.7.so ./x86_64-linux-gnu/libpython2.7.so.1 ./x86_64-linux-gnu/libpython3.4m.so.1 so why cmake can not find the PythonLibs, or how should I deal with this?

  Read the article

• old kernel uninstall select video drivers

  - by Zero

  On synaptic selected my old kernel to uninstall: linux-generic linux-headers-3.2.0-31-generic linux-image-3.2.0-31-generic linux-image-3.2.0-33-generic linux-image-generic But if i select to uninstall linux-headers-3.2.0-33-generic it select my display drivers and after that wanna install pae kernel. It's possible delete header files without loosing my video drivers and without installing pae kernel ?

  Read the article

• Broadcom brcm80211 installation from source

  - by calmpitbull

  Hello need help to get my wifi chipset working.I have brcmsmac driver and i would like to have brcm80211 chipset up and running. I have tried everything but nothing helped? git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git Copy brcm/bcm43xx-0.fw and brcm/bcm43xx_hdr-0.fw to /lib/firmware/brcm (or wherever firmware is normally installed on your system). still got brcmsmac ?? then i tryed git clone git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git clone git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git cd ~/linux-next/drivers/staging/brcm80211 nano Makefile the problem is that there is no brcm82011 folder?? do i follow cd ~/linux-next-a694cb1 like the link sad? i have Broadcom Corporation BCM4313 [14e4:4727]

  Read the article

• (12.04 vm/server) Dist-upgrade to 3.2.0-63 wants to remove git (1.9.2) and git-core - is that the correct behavior?

  - by YellowShark

  was wondering if anyone knows dist-upgrade wants to remove git. FWIW, this is a pretty simple box, mainly used for web dev. $ uname -a Linux precise64 3.2.0-61-generic #93-Ubuntu SMP Fri May 2 21:31:50 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux $ git --version git version 1.9.2 $ sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages will be REMOVED: git git-core The following NEW packages will be installed: linux-headers-3.2.0-63 linux-headers-3.2.0-63-generic linux-image-3.2.0-63-generic The following packages will be upgraded: git-man linux-headers-server linux-image-server linux-server phpmyadmin 5 upgraded, 3 newly installed, 2 to remove and 0 not upgraded. Need to get 58.8 MB of archives. After this operation, 199 MB of additional disk space will be used. Do you want to continue [Y/n]?

  Read the article

• How can I port msvc++ code with non-dependent names in templates to Linux?

  - by user352382

  I can deal with porting platform dependent functions. I have a problem that the compilers I tried on Linux (clang and g++) do not accept the following code, while the msvc++ compiler does: template <class T> class Base { protected: T Value; }; template <class T> class Derived : public Base<T> { public: void setValue(const T& inValue){ Value = inValue; } }; int main(int argc, char const *argv[]) { Derived<int> tmp; tmp.setValue(0); return 0; } g++ error: main.cpp: In member function ‘void Derived<T>::setValue(const T&)’: main.cpp:11:3: error: ‘Value’ was not declared in this scope I believe this due to the use of a non-dependent name (Value) in the second class. More information. The problem is that I have a very large code base, in which this type of code is used very often. I understand that it is wrong when looking at the standard. However it is very convenient not having to write this-> or Base<T>:: in front of every use of Value. Even writing using Base<T>::Value; at the start of the derived class is problematic when you use ~20 members of the base class. So my question is: are there compilers for Linux that allow this kind of code (with or without extra compiler switches)? Or are there small modifications that will allow this code to compile on Linux?

  Read the article

• How to install wkhtmltopdf on a linux based web server

  - by Yogi Yang 007

  I have tried in all ways to get wkhtmltopdf installed on our web server but unfortunately it is not getting installed. I cannot access user/bin folder as stated in a tutorial on installation. On the server in public_html folder there is a sub folder _vti_bin, I copied the file wkhtmltopdf-i386 from wkhtmltopdf-0.9.1-static-i386, but I am not able to execute it. How to install wkhtmltopdf on (shared hosting) web server and get it working?

  Read the article

• Migrate from MySQL to PostgreSQL on Linux (Kubuntu)

  - by Dave Jarvis

  A long time ago in a galaxy far, far away... Trying to migrate a database from MySQL to PostgreSQL. All the documentation I have read covers, in great detail, how to migrate the structure. I have found very little documentation on migrating the data. The schema has 13 tables (which have been migrated successfully) and 9 GB of data. MySQL version: 5.1.x PostgreSQL version: 8.4.x I want to use the R programming language to analyze the data using SQL select statements; PostgreSQL has PL/R, but MySQL has nothing (as far as I can tell). A New Hope Create the database location (/var has insufficient space; also dislike having the PostgreSQL version number everywhere -- upgrading would break scripts!): sudo mkdir -p /home/postgres/main sudo cp -Rp /var/lib/postgresql/8.4/main /home/postgres sudo chown -R postgres.postgres /home/postgres sudo chmod -R 700 /home/postgres sudo usermod -d /home/postgres/ postgres All good to here. Next, restart the server and configure the database using these installation instructions: sudo apt-get install postgresql pgadmin3 sudo /etc/init.d/postgresql-8.4 stop sudo vi /etc/postgresql/8.4/main/postgresql.conf Change data_directory to /home/postgres/main sudo /etc/init.d/postgresql-8.4 start sudo -u postgres psql postgres \password postgres sudo -u postgres createdb climate pgadmin3 Use pgadmin3 to configure the database and create a schema. The episode continues in a remote shell known as bash, with both databases running, and the installation of a set of tools with a rather unusual logo: SQL Fairy. perl Makefile.PL sudo make install sudo apt-get install perl-doc (strangely, it is not called perldoc) perldoc SQL::Translator::Manual Extract a PostgreSQL-friendly DDL and all the MySQL data: sqlt -f DBI --dsn dbi:mysql:climate --db-user user --db-password password -t PostgreSQL > climate-pg-ddl.sql mysqldump --skip-add-locks --complete-insert --no-create-db --no-create-info --quick --result-file="climate-my.sql" --databases climate --skip-comments -u root -p The Database Strikes Back Recreate the structure in PostgreSQL as follows: pgadmin3 (switch to it) Click the Execute arbitrary SQL queries icon Open climate-pg-ddl.sql Search for TABLE " replace with TABLE climate." (insert the schema name climate) Search for on " replace with on climate." (insert the schema name climate) Press F5 to execute This results in: Query returned successfully with no result in 122 ms. Replies of the Jedi At this point I am stumped. Where do I go from here (what are the steps) to convert climate-my.sql to climate-pg.sql so that they can be executed against PostgreSQL? How to I make sure the indexes are copied over correctly (to maintain referential integrity; I don't have constraints at the moment to ease the transition)? How do I ensure that adding new rows in PostgreSQL will start enumerating from the index of the last row inserted (and not conflict with an existing primary key from the sequence)? How do you ensure the schema name comes through when transforming the data from MySQL to PostgreSQL inserts? Resources A fair bit of information was needed to get this far: https://help.ubuntu.com/community/PostgreSQL http://articles.sitepoint.com/article/site-mysql-postgresql-1 http://wiki.postgresql.org/wiki/Converting_from_other_Databases_to_PostgreSQL#MySQL http://pgfoundry.org/frs/shownotes.php?release_id=810 http://sqlfairy.sourceforge.net/ Thank you!

  Read the article

• Illustration of buffer overflows for students (linux, C)

  - by osgx

  Hello My friend is teacher of first-year CS students. We want to show them buffer overflow exploitation. But modern distribs are protected from simples buffer overflows: HOME=`perl -e "print 'A'x269"` one_widely_used_utility_is_here --help on debian (blame it) Caught signal 11, on modern commercial redhat *** buffer overflow detected ***: /usr/bin/one_widely_used_utility_is_here terminated ======= Backtrace: ========= /lib/libc.so.6(__chk_fail+0x41)[0xc321c1] /lib/libc.so.6(__strcpy_chk+0x43)[0xc315e3] /usr/bin/one_widely_used_utility_is_here[0x805xxxc] /usr/bin/one_widely_used_utility_is_here[0x804xxxc] /lib/libc.so.6(__libc_start_main+0xdc)[0xb61e9c] /usr/bin/one_widely_used_utility_is_here[0x804xxx1] ======= Memory map: ======== 00336000-00341000 r-xp 00000000 08:02 2751047 /lib/libgcc_s-4.1.2-20080825.so.1 00341000-00342000 rwxp 0000a000 08:02 2751047 /lib/libgcc_s-4.1.2-20080825.so.1 008f3000-008f4000 r-xp 008f3000 00:00 0 [vdso] The same detector fails for more synthetic examples from the internet. How can we demonstrate buffer overflow with modern non-GPL distribs (there is no debian in classes) How can we DISABLE canary word checking in stack ? DISABLE checking variants of strcpy/strcat ? write an example (in plain C) with working buffer overrun ?

  Read the article

• How to detect defunct processes on Linux?

  - by Hakan

  I have a parent and a child process written in C language. Somewhere in the parent process HUP signal is sent to the child. I want my parent process to detect if the child is dead. But when I send SIGHUP, the child process becomes a zombie. How can I detect if the child is a zombie in the parent process? I try the code below, but it doesn't return me the desired result since the child process is still there but it is defunct. kill(childPID, 0); One more question; can I kill the zombie child without killing the parent? Thanks.

  Read the article

• Is it possible to access a COM Object from Linux

  - by wodka

  Office is running in Wine, meaning I have a running Version (2003). But when I try to create a new COM object I just get the following error: Fatal error: Class 'COM' not found <?php $com = new COM('Word.Application'); $com-close(); Is there a way to get this working without installing Windows?

  Read the article

• Linux Kernel wait_for_completion_timeout not wakeup by complete

  - by Jun Li

  I am working on a strange issue with the i2c-omap driver. I am not sure if the problem happens at other time or not, but it happens around 5% of the time I tried to power off the system. During system power off, I write to some registers in the PMIC via I2C. In i2c-omap.c, I can see that the calling thread is waiting on wait_for_completion_timeout with a timeout value set to 1 second. And I can see the IRQ called "complete" (I added printk AFTER "complete"). However, after "complete" gets called, the wait_for_completion_timeout did not return. Instead, it takes up to 5 MINUTES before it returns. And the return value of wait_for_completion_timeout is positive indicating that there is no timeout. And the whole I2C transaction was successful. In the meantime, I can see printk messages from other drivers. And the serial console still works. It is on Android, and if I use "top" I can see system_server is taking about 95% of the CPU. Killing system_server can make the wait_for_completion_timeout return immediately. So my question is what could a user space app (system_server) do to make a kernel "wait_for_completion_timeout" not being wake up? Thanks!

  Read the article

• How to extend the hard disk partition in linux operating system

  - by pavun_cool

  I have 10GB partition . I want to extend that partition to 20GB . Actually I have free space in my hard disk...What should I do.... Can any one help out of this problem Thanks in Advance...

  Read the article

• Using Python for a Wacom tablet on Mac & Linux

  - by DamonJW

  I am shortly going to buy a Wacom Bamboo Pen&Touch, and I'd like to be able to access it from Python, preferably using PyQt. I've found a Python module for accessing it under windows (cgkit/wintab) and I've seen Python code for accessing it using GTK (GnomeTabletApps). Is there an equivalent for Mac? The Cocoa documentation provided by Wacom is way beyond me.

  Read the article

• Java / Tomcat memory leak in RedHat Linux?

  - by black-rocky

  Hi, I've got a Red Hat box with 6G memory running Tomcat and I'm trying to figure out how much memory I have left on the box. Problem is, top & jconsole is showing one figure (around 200M), and system monitor is showing a different figure (around 2G). Does anybody know what the difference is? I'm not sure if there is a memory leak happenning here, but the highest memory consumer is a tomcat process that's taking 2.2G of memory. Screenshots below:

  Read the article

• Compiling a Python binding on Linux

  - by Thiago

  Hi I'm trying to compile a Python binding, but I'm unable to find the python.h header on debian. Which package should I install? Thanks in advance

  Read the article

• Simple startup on boot of misc application (Java based) on Ubuntu Linux 8+

  - by Berlin Brown

  What is the easiest way to have an application launch at startup? This is a java application (java com.run.run.Run) etc. How would I have it launch as a user and possibly have access to write to some log file where the user has permissions to write? And if I don't end up doing that, how would I launch the application as the root user at startup.

  Read the article

• Linux find command gotcha?

  - by rabbit

  Hi I am trying to find all js & css files in one find command. I tried all of the below but in vain: find WebContent -name "*.[jc]ss?" find WebContent -name "*.[jc]ss{0,1}" find WebContent -name "*.[jc][s]{1,2}$" find WebContent -name "*.[jc]s{1,2}" find WebContent -name "*.[jc]s[s]?" Now what??

  Read the article

• install linux guest on windows host using a .iso file on vmserver 2.0

  - by Bob

  I have done this in vmserver 1.0. I set the Cd to point to the .iso file. Then I start the vm and it starts to install. I am on the summary screen. I have created a VM. I go to CD/DVD - edit I change the radio button to Host Medio Then I select ISO Image and Browse. Here is the problem: Then in my browser I get Inventory - Virtual Machine (directory) I don't know where that directory is. I have my ISO's in a folder on my desktop. I can't browse to my desktop. When I try to just put in a path such as c:\mydesktop\mylinuxdirectory\linux1.iso The following problems have been found:OKThe ISO Image File Path must be a valid file path in the format: "[datastore] /path/to/isoimage.iso". so how do I browse to an ISO? I can add the iso after I start the VM, but by then its too late and the VM says no Operating System installed.

  Read the article

• Linux tail only whole words

  - by Andrew

  Hello, I need to print last 20 characters of string, but only whole words. Delimiter is a space "". Let's consider this example: string="The quick brown fox jumps over the lazy dog" echo $string | tail -c20 returns s over the lazy dog. And I need it to return over the lazy dog instead. Do you know how to accomplish that? Thanks!

  Read the article

• Linux wc command [closed]

  - by pedro

  How can i count characters, words and lines from a file with wc command?

  Read the article

• How to convert .cpp file into .exe file in Linux

  - by user69514

  I make this program in C++ using Code::Blocks on Ubuntu. I need to turn it into a .exe file, but I don't know how to do this. Is it possible?

  Read the article

• How to compile a .cpp file into a Windows executable (.exe) file in Linux

  - by user69514

  I make this program in C++ using Code::Blocks on Ubuntu. I need to turn it into a Windows executable binary (.exe file), but I don't know how to do this. Is it possible?

  Read the article

• C/C++/Assembly Programatically detect if hyper-threading is active on Windows, Mac and Linux

  - by HTASSCPP

  I can already correctly detect the number of logical processors correctly on all three of these platforms. To be able to detect the number of physical processors/cores correctly I'll have to detect if hyperthreading is supported AND active (or enabled if you prefer) and if so divide the number of logical processors by 2 to determine the number of physical processors. Perphaps I should provide an example: A quad core Intel CPU's with hyperthreading enabled has 4 physical cores, yet 8 logical processors (hyperthreading creates 4 more logical processors). So my current function would detect 8 instead of the desired 4. My question therefore is if there is a way to detect whether hyperthreading is supported AND ENABLED?

  Read the article

< Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >