Search Results

Search found 149 results on 6 pages for 'rabbit'.

Page 1/6 | 1 2 3 4 5 6  | Next Page >

  • SpringSource rachète Rabbit Technologies, société à l'origine de la solution AMQP Rabbit MQ

    Et une acquisition de plus pour SpringSource ! Non content d'avoir déjà une bonne assise dans le domaine de messaging en employant plusieurs commiter sur ActiveMQ, SpringSource rachète aquiert Rabbit Technologies. Rabbit Technologies est la société derrière RabbitMQ, qui est une implémentation d'un serveur AMQP. Ce protocol, contraitement à JMS qui n'a pour objectif de fournir une API d'accès, à pour but de standardiser tout le système de messaging allant des différents mode de transmission au format de messages. Grâce à cela, tout serveurs compatibles AMQP peuvent commiquer entre eux, indépendamment du langage dans lequel ils sont implémenté ou le système sur lequel il tourne.

    Read the article

  • What's the point of Rabbit MQ? [duplicate]

    - by bad_boy
    This question already has an answer here: When to use Advanced Message Queuing Protocol like RabbitMQ? [closed] 2 answers First of all, let me say, I have no problem following tutorials. The problem is that I don't understand why even Rabbit MQ is ever needed. And there's no such explanation on tutorials - they only show what to do and how to use, but not when its usage is the case. Can you explain this? Why would you want to use Rabbit MQ? To solve what problem?

    Read the article

  • Trouble installing Rabbit VCS for nautilus

    - by Ranhiru Cooray
    I am using Ubuntu 11.10 and following instructions mentioned here to install Rabbit VCS. I added the PPA properly, did a sudo apt-get update and ran sudo apt-get install rabbitvcs-core rabbitvcs-nautilus rabbitvcs-thunar rabbitvcs-gedit rabbitvcs-cli There were dependency issues and I googled a bit and found out that I need to install RabbitVCS only for nautilus as that is the default file manager for Ubuntu. So I ran the install commands separately for rabbitvcs-core, rabbitvcs-gedit and rabbitvcs-cli. Now my understanding is that those are installed properly. However when I run the install command for rabbitvcs-nautilus, I still get a dependency issue. ranhiru@ranhiru-HP-HDX16-NoteBook-PC:~$ sudo apt-get install rabbitvcs-nautilus Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: rabbitvcs-nautilus : Depends: nautilus (< 1:3.0~) but 1:3.2.1-0ubuntu2 is to be installed Depends: python-nautilus (< 1.0~) but 1.0-0ubuntu2 is to be installed E: Unable to correct problems, you have held broken packages. How do I solve this?

    Read the article

  • Rails: Passing new child object placeholder (build) to parent view

    - by Meltemi
    I've got 2 classes of objects... Magician has_many Rabbits and Rabbit belongs_to Magician. When viewing a Magician (show.html) I'd like to list all the associated Rabbits and then have some blank fields with a submit button to add a new Rabbit. To do so I build a new rabbit (associated to the current magician) in the Magician's show method (below). Edit2: found way to make it work but not sure if it's the "Rails way"? see comments inline (below): If I build the rabbit in Magician's show method then when show is rendered an empty (and invalid) rabbit ends the list before the new rabbit form fields are then shown. If I build it in the view itself then everything works & renders correctly. I was led to believe that we should not be doing this type of stuff in the view...if so, what's the proper way to address this? #/app/controllers/magicians_controller.rb class MagiciansController < ApplicationController respond_to :html, :json def show @magician = Magician.find(params[:id]) @rabbit = @magician.rabbits.build # <=== build here and empty rabbit gets # included in @magician.rabbits when they're rendered... # but is NOT included in @magician.rabbits.count for some reason?!?!? respond_with(@magician) end ... end #view/magicians/show.html.haml %p %b Name: = @magician.name %h2 Rabbits = "There are #{pluralize(@magician.rabbits.count, "rabbit")}" = render @magician.rabbits, :target => @magician %h2 Add a rabbit: - @rabbit = @clown.rabbits.build -# <=== build here and everything SEEMS to work = render :partial =>"rabbits/form", :locals => { :parent => @magician, :foreign_key => :magician_id, :flash => flash } Edit1: Adding generated html from partial as per request: <p> <b>Rabbit:</b> <b>Color:</b> | <b>ID:</b> <a href="/magicians/2/rabbits" data-confirm="Sure? A bunny will die" data-method="delete" rel="nofollow">Kill Rabbit</a> </p> And I suppose you probably want to see the partial that generates this: %p %b Rabbit: = rabbit.name %b Color: = rabbit.color | %b ID: = rabbit.id = link_to("Kill Rabbit", [target, rabbit], :method => :delete, :confirm => "Sure? A bunny will die")

    Read the article

  • Flushing a queue using AMQP, Rabbit, and Ruby

    - by jeffshantz
    I'm developing a system in Ruby that is going to make use of RabbitMQ to send messages to a queue as it does some work. I am using: Ruby 1.9.1 Stable RabbitMQ 1.7.2 AMQP gem v0.6.7 (http://github.com/tmm1/amqp) Most of the examples I have seen on this gem have their publish calls in an EM.add_periodic_timer block. This doesn't work for what I suspect is a vast majority of use cases, and certainly not for mine. I need to publish a message as I complete some work, so putting a publish statement in an add_periodic_timer block doesn't suffice. So, I'm trying to figure out how to publish a few messages to a queue, and then "flush" it, so that any messages I've published are then delivered to my subscribers. To give you an idea of what I mean, consider the following publisher code: #!/usr/bin/ruby require 'rubygems' require 'mq' MESSAGES = ["hello","goodbye","test"] AMQP.start do queue = MQ.queue('testq') messages_published = 0 while (messages_published < 50) if (rand() < 0.4) message = MESSAGES[rand(MESSAGES.size)] puts "#{Time.now.to_s}: Publishing: #{message}" queue.publish(message) messages_published += 1 end sleep(0.1) end AMQP.stop do EM.stop end end So, this code simply loops, publishing a message with 40% probability on each iteration of the loop, and then sleeps for 0.1 seconds. It does this until 50 messages have been published, and then stops AMQP. Of course, this is just a proof of concept. Now, my subscriber code: #!/usr/bin/ruby require 'rubygems' require 'mq' AMQP.start do queue = MQ.queue('testq') queue.subscribe do |header, msg| puts "#{Time.now.to_s}: Received #{msg}" end end So, we just subscribe to the queue, and for each message received, we print it out. Great, except that the subscriber only receives all 50 messages when the publisher calls AMQP.stop. Here's the output from my publisher. It has been truncated in the middle for brevity: $ ruby publisher.rb 2010-04-14 21:45:42 -0400: Publishing: test 2010-04-14 21:45:42 -0400: Publishing: hello 2010-04-14 21:45:42 -0400: Publishing: test 2010-04-14 21:45:43 -0400: Publishing: test 2010-04-14 21:45:44 -0400: Publishing: test 2010-04-14 21:45:44 -0400: Publishing: goodbye 2010-04-14 21:45:45 -0400: Publishing: goodbye 2010-04-14 21:45:45 -0400: Publishing: test 2010-04-14 21:45:45 -0400: Publishing: test . . . 2010-04-14 21:45:55 -0400: Publishing: test 2010-04-14 21:45:55 -0400: Publishing: test 2010-04-14 21:45:55 -0400: Publishing: test 2010-04-14 21:45:55 -0400: Publishing: goodbye Next, the output from my subscriber: $ ruby consumer.rb 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received hello 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received goodbye 2010-04-14 21:45:56 -0400: Received goodbye 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received test . . . 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received test 2010-04-14 21:45:56 -0400: Received goodbye If you note the timestamps in the output, the subscriber only receives all of the messages once the publisher has stopped AMQP and exited. So, being an AMQP newb, how can I get my messages to deliver immediately? I tried putting AMQP.start and AMQP.stop in the body of the while loop of the publisher, but then only the first message gets delivered -- though strangely, if I turn on logging, there are no error messages reported by the server and the messages do get sent to the queue, but never get received by the subscriber. Suggestions would be much appreciated. Thanks for reading.

    Read the article

  • General ORM design question

    - by Calvin
    Suppose you have 2 classes, Person and Rabbit. A person can do a number of things to a rabbit, s/he can either feed it, buy it and become its owner, or give it away. A rabbit can have none or at most 1 owner at a time. And if it is not fed for a while, it may die. Class Person { Void Feed(Rabbit r); Void Buy(Rabbit r); Void Giveaway(Person p, Rabbit r); Rabbit[] rabbits; } Class Rabbit { Bool IsAlive(); Person pwner; } There are a couple of observations from the domain model: Person and Rabbit can have references to each other Any actions on 1 object can also change the state of the other object Even if no explicit actions are invoked, there can still be a change of state in the objects (e.g. Rabbit can be starved to death, and that causes it to be removed from the Person.rabbits array) As DDD is concerned, I think the correct approach is to synchronize all calls that may change the states in the domain model. For instance, if a Person buys a Rabbit, s/he would need to acquire a lock in Person to make a change to the rabbits array AND also another lock in Rabbit to change its owner before releasing the first one. This would prevent a race condition where 2 Persons claim to be the owner of the little Rabbit. The other approach is to let the database to handle all these synchronizations. Who makes the first call wins, but then the DB needs to have some kind of business logics to figure out if it is a valid transaction (e.g. if a Rabbit already has an owner, it cannot change its owner unless the Person gives it away). There are both pros/cons in either approach, and I’d expect the “best” solution would be somewhere in-between. How would you do it in real life? What’s your take and experience? Also, is it a valid concern that there can be another race condition the domain model has committed its change but before it is fully committed in the database? And for the 3rd observation (i.e. state change due to time factor). How will you do it?

    Read the article

  • What is there so useful in the Decorator Pattern? My example doesn't work

    - by Green
    The book says: The decorator pattern can be used to extend (decorate) the functionality of a certain object I have a rabbit animal. And I want my rabbit to have, for example, reptile skin. Just want to decorate a common rabbit with reptile skin. I have the code. First I have abstract class Animal with everythig that is common to any animal: abstract class Animal { abstract public function setSleep($hours); abstract public function setEat($food); abstract public function getSkinType(); /* and more methods which for sure will be implemented in any concrete animal */ } I create class for my rabbit: class Rabbit extends Animal { private $rest; private $stomach; private $skinType = "hair"; public function setSleep($hours) { $this->rest = $hours; } public function setFood($food) { $this->stomach = $food; } public function getSkinType() { return $this->$skinType; } } Up to now everything is OK. Then I create abstract AnimalDecorator class which extends Animal: abstract class AnimalDecorator extends Animal { protected $animal; public function __construct(Animal $animal) { $this->animal = $animal; } } And here the problem comes. Pay attention that AnimalDecorator also gets all the abstract methods from the Animal class (in this example just two but in real can have many more). Then I create concrete ReptileSkinDecorator class which extends AnimalDecorator. It also has those the same two abstract methods from Animal: class ReptileSkinDecorator extends AnimalDecorator { public function getSkinColor() { $skin = $this->animal->getSkinType(); $skin = "reptile"; return $skin; } } And finaly I want to decorate my rabbit with reptile skin: $reptileSkinRabbit = ReptileSkinDecorator(new Rabbit()); But I can't do this because I have two abstract methods in ReptileSkinDecorator class. They are: abstract public function setSleep($hours); abstract public function setEat($food); So, instead of just re-decorating only skin I also have to re-decorate setSleep() and setEat(); methods. But I don't need to. In all the book examples there is always ONLY ONE abstract method in Animal class. And of course it works then. But here I just made very simple real life example and tried to use the Decorator pattern and it doesn't work without implementing those abstract methods in ReptileSkinDecorator class. It means that if I want to use my example I have to create a brand new rabbit and implement for it its own setSleep() and setEat() methods. OK, let it be. But then this brand new rabbit has the instance of commont Rabbit I passed to ReptileSkinDecorator: $reptileSkinRabbit = ReptileSkinDecorator(new Rabbit()); I have one common rabbit instance with its own methods in the reptileSkinRabbit instance which in its turn has its own reptileSkinRabbit methods. I have rabbit in rabbit. But I think I don't have to have such possibility. I don't understand the Decarator pattern right way. Kindly ask you to point on any mistakes in my example, in my understanding of this pattern. Thank you.

    Read the article

  • Javascript for loop with variable

    - by Jascination
    I'm doing some simple javascript learning at the moment and I'm stuck on how to solve this problem. (the basic form comes from Code Academy). The task is to create 3 rabbit objects, each with a different adjective as an attribute. Then, print describeMyself() for each rabbit. Instead of repeating myself 3 times, I'd like to find a way to solve the problem with a for loop to make it more streamlined/challenging for myself. Here's what I tried: function Rabbit(adjective) { this.adjective = adjective; this.describeMyself = function() { console.log("I am a " + this.adjective + " rabbit"); }; } var rabbit1 = new Rabbit(fluffy); var rabbit2 = new Rabbit(happy); var rabbit3 = new Rabbit(sleepy); for (i=1; i<=3; i++){ ("rabbit"+i).describeMyself(); } Obviously, the ("rabbit"+i).describeMyself() is wrong. I want the loop to create "rabbit1", "rabbit2" and "rabbit3". What's the proper syntax here?

    Read the article

  • Game logic dynamically extendable architecture implementation patterns

    - by Vlad
    When coding games there are a lot of cases when you need to inject your logic into existing class dynamically and without making unnecessary dependencies. For an example I have a Rabbit which can be affected by freeze ability so it can't jump. It could be implemented like this: class Rabbit { public bool CanJump { get; set; } void Jump() { if (!CanJump) return; ... } } But If I have more than one ability that can prevent it from jumping? I can't just set one property because some circumstances can be activated simultanously. Another solution? class Rabbit { public bool Frozen { get; set; } public bool InWater { get; set; } bool CanJump { get { return !Frozen && !InWater; } } } Bad. The Rabbit class can't know all the circumstances it can run into. Who knows what else will game designer want to add: may be an ability that changes gravity on an area? May be make a stack of bool values for CanJump property? No, because abilities can be deactivated not in that order in which they were activated. I need a way to seperate ability logic that prevent the Rabbit from jumping from the Rabbit itself. One possible solution for this is making special checking event: class Rabbit { class CheckJumpEventArgs : EventArgs { public bool Veto { get; set; } } public event EventHandler<CheckJumpEvent> OnCheckJump; void Jump() { var args = new CheckJumpEventArgs(); if (OnCheckJump != null) OnCheckJump(this, args); if (!args.Veto) return; ... } } But it's a lot of code! A real Rabbit class would have a lot of properties like this (health and speed attributes, etc). I'm thinking of borrowing something from MVVM pattern where you have all the properties and methods of an object implemented in a way where they can be easily extended from outside. Then I want to use it like this: class FreezeAbility { void ActivateAbility() { _rabbit.CanJump.Push(ReturnFalse); } void DeactivateAbility() { _rabbit.CanJump.Remove(ReturnFalse); } // should be implemented as instance member // so it can be "unsubscribed" bool ReturnFalse(bool previousValue) { return false; } } Is this approach good? What also should I consider? What are other suitable options and patterns? Any ready to use solutions? UPDATE The question is not about how to add different behaviors to an object dynamically but how its (or its behavior) implementation can be extended with external logic. I don't need to add a different behavior but I need a way to modify an exitsing one and I also need a possibiliity to undo changes.

    Read the article

  • When writing a game, should you make objects/enemies/etc. have unique ID numbers?

    - by SLC
    I have recently encountered some issues with merely passing references to objects/enemies in a game I am making, and am wondering if I am using the wrong approach. The main issue I have is disposing of enemies and objects, when other enemies or players may still have links to them. For example, if you have a Rabbit, and a Wolf, the Wolf may have selected the Rabbit to be its target. What I am doing, is the wolf has a GameObject Target = null; and when it decides it is hungry, the Target becomes the Rabbit. If the Rabbit then dies, such as another wolf killing it, it cannot be removed from the game properly because this wolf still has a reference to it. In addition, if you are using a decoupled approach, the rabbit could hit by lightning, reducing its health to below zero. When it next updates itself, it realises it has died, and is removed from the game... but there is no way to update everything that is interested in it. If you gave every enemy a unique ID, you could simply use references to that instead, and use a central lookup class that handled it. If the monster died, the lookup class could remove it from its own index, and subsequently anything trying to access it would be informed that it's dead, and then they could act accordingly. Any thoughts on this?

    Read the article

  • Regex for finding an unterminated string

    - by Austin Hyde
    I need to search for lines in a CSV file that end in an unterminated, double-quoted string. For example: 1,2,a,b,"dog","rabbit would match whereas 1,2,a,b,"dog","rabbit","cat bird" 1,2,a,b,"dog",rabbit would not. I have very limited experience with regular expressions, and the only thing I could think of is something like "[^"]*$ However, that matches the last quote to the end of the line. How would this be done?

    Read the article

  • Lenovo V570 CPU fan running constantly, CPU core 1 running over 90%!

    - by Rabbit2190
    I have seen that a lot of people are having this same issue. I am running a Lenovo V570 i5 4 core, 6 gigs of ram, and am running 11.10 Onieric Ocelot. On my system monitor graph it shows CPU at 20%, when I open the monitor it shows core #1 at around 90%, the other cores fluctuate at or below 5-12% if even. Now this seems like a really terrible balance of power between the cores, especially with so much stress on one core only, when these things are designed to work with 4 cores and not at such high temps. My current readings say 64 degrees Celsius, this does not seem normal for any cpu, and I am seriously considering, working on my windows7 partition until I see a real solution to this issue or upgrading to 12.04 right away when it comes out... I have seen countless things saying it has something to do with the Kernel, the kernel on mine is the same as when I upgraded, I really do not like messing with it, as when I had 11.04, I did tinker with it due to the freeze issues I was having, and that just made worse issues. I like this version 11.10 and would like to keep it for a while, but without the fear that my core is going to fry! So any help would be much appreciated! I did try changing a couple things in ACPI, and restarting this did not help, and here I am. I tried one thing prior to that that was listed under a different computer brand, but it would not do a make on the file. I really need help with this, I rely on this computer for a lot of things, and love this OS! Please help so I do not need to resort to my Microsoft partition! PLEASE! Here is the fwts cpufrequ- output: rabbit@rabbit-Lenovo-V570:~$ sudo fwts cpufreq - 00001 fwts Results generated by fwts: Version V0.23.25 (Thu Oct 6 15 00002 fwts :12:31 BST 2011). 00003 fwts 00004 fwts Some of this work - Copyright (c) 1999 - 2010, Intel Corp. 00005 fwts All rights reserved. 00006 fwts Some of this work - Copyright (c) 2010 - 2011, Canonical. 00007 fwts 00008 fwts This test run on 02/04/12 at 17:23:22 on host Linux 00009 fwts rabbit-Lenovo-V570 3.0.0-17-generic-pae #30-Ubuntu SMP Thu 00010 fwts Mar 8 17:53:35 UTC 2012 i686. 00011 fwts 00012 fwts Running tests: cpufreq. 00014 cpufreq CPU frequency scaling tests (takes ~1-2 mins). 00015 cpufreq --------------------------------------------------------- 00016 cpufreq Test 1 of 1: CPU P-State Checks. 00017 cpufreq For each processor in the system, this test steps through 00018 cpufreq the various frequency states (P-states) that the BIOS 00019 cpufreq advertises for the processor. For each processor/frequency 00020 cpufreq combination, a quick performance value is measured. The 00021 cpufreq test then validates that: 00022 cpufreq 1) Each processor has the same number of frequency states 00023 cpufreq 2) Higher advertised frequencies have a higher performance 00024 cpufreq 3) No duplicate frequency values are reported by the BIOS 00025 cpufreq 4) Is BIOS wrongly doing Sw_All P-state coordination across cores 00026 cpufreq 5) Is BIOS wrongly doing Sw_Any P-state coordination across cores 00027 cpufreq Frequency | Speed 00028 cpufreq -----------+--------- 00029 cpufreq 2.45 Ghz | 100.0 % 00030 cpufreq 2.45 Ghz | 83.7 % 00031 cpufreq 2.05 Ghz | 69.2 % 00032 cpufreq 1.85 Ghz | 62.5 % 00033 cpufreq 1.65 Ghz | 55.2 % 00034 cpufreq 1400 Mhz | 48.6 % 00035 cpufreq 1200 Mhz | 41.8 % 00036 cpufreq 1000 Mhz | 34.5 % 00037 cpufreq 800 Mhz | 27.6 % 00038 cpufreq 9 CPU frequency steps supported 00039 cpufreq Frequency | Speed 00040 cpufreq -----------+--------- 00041 cpufreq 2.45 Ghz | 97.7 % 00042 cpufreq 2.45 Ghz | 83.7 % 00043 cpufreq 2.05 Ghz | 69.6 % 00044 cpufreq 1.85 Ghz | 63.3 % 00045 cpufreq 1.65 Ghz | 55.7 % 00046 cpufreq 1400 Mhz | 48.7 % 00047 cpufreq 1200 Mhz | 41.7 % 00048 cpufreq 1000 Mhz | 34.5 % 00049 cpufreq 800 Mhz | 27.5 % 00050 cpufreq Frequency | Speed 00051 cpufreq -----------+--------- 00052 cpufreq 2.45 Ghz | 97.7 % 00053 cpufreq 2.45 Ghz | 84.4 % 00054 cpufreq 2.05 Ghz | 69.6 % 00055 cpufreq 1.85 Ghz | 62.6 % 00056 cpufreq 1.65 Ghz | 55.9 % 00057 cpufreq 1400 Mhz | 48.7 % 00058 cpufreq 1200 Mhz | 41.7 % 00059 cpufreq 1000 Mhz | 34.7 % 00060 cpufreq 800 Mhz | 27.8 % 00061 cpufreq Frequency | Speed 00062 cpufreq -----------+--------- 00063 cpufreq 2.45 Ghz | 100.0 % 00064 cpufreq 2.45 Ghz | 82.6 % 00065 cpufreq 2.05 Ghz | 67.8 % 00066 cpufreq 1.85 Ghz | 61.4 % 00067 cpufreq 1.65 Ghz | 54.9 % 00068 cpufreq 1400 Mhz | 48.3 % 00069 cpufreq 1200 Mhz | 41.1 % 00070 cpufreq 1000 Mhz | 34.3 % 00071 cpufreq 800 Mhz | 27.4 % 00072 cpufreq Frequency | Speed 00073 cpufreq -----------+--------- 00074 cpufreq 2.45 Ghz | 96.2 % 00075 cpufreq 2.45 Ghz | 82.5 % 00076 cpufreq 2.05 Ghz | 69.3 % 00077 cpufreq 1.85 Ghz | 62.7 % 00078 cpufreq 1.65 Ghz | 55.0 % 00079 cpufreq 1400 Mhz | 47.4 % 00080 cpufreq 1200 Mhz | 41.1 % 00081 cpufreq 1000 Mhz | 34.0 % 00082 cpufreq 800 Mhz | 27.2 % 00083 cpufreq Frequency | Speed 00084 cpufreq -----------+--------- 00085 cpufreq 2.45 Ghz | 96.5 % 00086 cpufreq 2.45 Ghz | 83.6 % 00087 cpufreq 2.05 Ghz | 68.1 % 00088 cpufreq 1.85 Ghz | 61.7 % 00089 cpufreq 1.65 Ghz | 54.9 % 00090 cpufreq 1400 Mhz | 48.0 % 00091 cpufreq 1200 Mhz | 41.1 % 00092 cpufreq 1000 Mhz | 34.2 % 00093 cpufreq 800 Mhz | 27.8 % 00094 cpufreq Frequency | Speed 00095 cpufreq -----------+--------- 00096 cpufreq 2.45 Ghz | 96.4 % 00097 cpufreq 2.45 Ghz | 82.6 % 00098 cpufreq 2.05 Ghz | 68.8 % 00099 cpufreq 1.85 Ghz | 60.5 % 00100 cpufreq 1.65 Ghz | 52.4 % 00101 cpufreq 1400 Mhz | 48.8 % 00102 cpufreq 1200 Mhz | 41.1 % 00103 cpufreq 1000 Mhz | 34.2 % 00104 cpufreq 800 Mhz | 26.4 % 00105 cpufreq Frequency | Speed 00106 cpufreq -----------+--------- 00107 cpufreq 2.45 Ghz | 95.3 % 00108 cpufreq 2.45 Ghz | 82.5 % 00109 cpufreq 2.05 Ghz | 65.5 % 00110 cpufreq 1.85 Ghz | 62.8 % 00111 cpufreq 1.65 Ghz | 54.8 % 00112 cpufreq 1400 Mhz | 48.0 % 00113 cpufreq 1200 Mhz | 41.2 % 00114 cpufreq 1000 Mhz | 34.2 % 00115 cpufreq 800 Mhz | 27.3 % 00116 cpufreq Frequency | Speed 00117 cpufreq -----------+--------- 00118 cpufreq 2.45 Ghz | 96.3 % 00119 cpufreq 2.45 Ghz | 83.4 % 00120 cpufreq 2.05 Ghz | 68.3 % 00121 cpufreq 1.85 Ghz | 61.9 % 00122 cpufreq 1.65 Ghz | 54.9 % 00123 cpufreq 1400 Mhz | 48.0 % 00124 cpufreq 1200 Mhz | 41.1 % 00125 cpufreq 1000 Mhz | 34.2 % 00126 cpufreq 800 Mhz | 27.3 % 00127 cpufreq Frequency | Speed 00128 cpufreq -----------+--------- 00129 cpufreq 2.45 Ghz | 100.0 % 00130 cpufreq 2.45 Ghz | 77.9 % 00131 cpufreq 2.05 Ghz | 64.6 % 00132 cpufreq 1.85 Ghz | 54.0 % 00133 cpufreq 1.65 Ghz | 51.7 % 00134 cpufreq 1400 Mhz | 45.2 % 00135 cpufreq 1200 Mhz | 39.0 % 00136 cpufreq 1000 Mhz | 33.1 % 00137 cpufreq 800 Mhz | 25.5 % 00138 cpufreq Frequency | Speed 00139 cpufreq -----------+--------- 00140 cpufreq 2.45 Ghz | 93.4 % 00141 cpufreq 2.45 Ghz | 75.7 % 00142 cpufreq 2.05 Ghz | 64.5 % 00143 cpufreq 1.85 Ghz | 59.1 % 00144 cpufreq 1.65 Ghz | 51.4 % 00145 cpufreq 1400 Mhz | 45.9 % 00146 cpufreq 1200 Mhz | 39.3 % 00147 cpufreq 1000 Mhz | 32.7 % 00148 cpufreq 800 Mhz | 25.8 % 00149 cpufreq Frequency | Speed 00150 cpufreq -----------+--------- 00151 cpufreq 2.45 Ghz | 92.1 % 00152 cpufreq 2.45 Ghz | 78.1 % 00153 cpufreq 2.05 Ghz | 65.7 % 00154 cpufreq 1.85 Ghz | 58.6 % 00155 cpufreq 1.65 Ghz | 52.5 % 00156 cpufreq 1400 Mhz | 45.7 % 00157 cpufreq 1200 Mhz | 39.3 % 00158 cpufreq 1000 Mhz | 32.7 % 00159 cpufreq 800 Mhz | 24.3 % 00160 cpufreq Frequency | Speed 00161 cpufreq -----------+--------- 00162 cpufreq 2.45 Ghz | 88.9 % 00163 cpufreq 2.45 Ghz | 79.8 % 00164 cpufreq 2.05 Ghz | 58.4 % 00165 cpufreq 1.85 Ghz | 52.6 % 00166 cpufreq 1.65 Ghz | 46.9 % 00167 cpufreq 1400 Mhz | 41.0 % 00168 cpufreq 1200 Mhz | 35.1 % 00169 cpufreq 1000 Mhz | 29.1 % 00170 cpufreq 800 Mhz | 22.9 % 00171 cpufreq Frequency | Speed 00172 cpufreq -----------+--------- 00173 cpufreq 2.45 Ghz | 92.8 % 00174 cpufreq 2.45 Ghz | 80.1 % 00175 cpufreq 2.05 Ghz | 66.2 % 00176 cpufreq 1.85 Ghz | 59.5 % 00177 cpufreq 1.65 Ghz | 52.9 % 00178 cpufreq 1400 Mhz | 46.2 % 00179 cpufreq 1200 Mhz | 39.5 % 00180 cpufreq 1000 Mhz | 32.9 % 00181 cpufreq 800 Mhz | 26.3 % 00182 cpufreq Frequency | Speed 00183 cpufreq -----------+--------- 00184 cpufreq 2.45 Ghz | 92.9 % 00185 cpufreq 2.45 Ghz | 79.5 % 00186 cpufreq 2.05 Ghz | 66.2 % 00187 cpufreq 1.85 Ghz | 59.6 % 00188 cpufreq 1.65 Ghz | 52.9 % 00189 cpufreq 1400 Mhz | 46.7 % 00190 cpufreq 1200 Mhz | 39.6 % 00191 cpufreq 1000 Mhz | 32.9 % 00192 cpufreq 800 Mhz | 26.3 % 00193 cpufreq FAILED [MEDIUM] CPUFreqCPUsSetToSW_ANY: Test 1, Processors 00194 cpufreq are set to SW_ANY. 00195 cpufreq FAILED [MEDIUM] CPUFreqSW_ANY: Test 1, Firmware not 00196 cpufreq implementing hardware coordination cleanly. Firmware using 00197 cpufreq SW_ANY instead?. 00198 cpufreq 00199 cpufreq ========================================================= 00200 cpufreq 0 passed, 2 failed, 0 warnings, 0 aborted, 0 skipped, 0 00201 cpufreq info only. 00202 cpufreq ========================================================= 00204 summary 00205 summary 0 passed, 2 failed, 0 warnings, 0 aborted, 0 skipped, 0 00206 summary info only. 00207 summary 00208 summary Test Failure Summary 00209 summary ==================== 00210 summary 00211 summary Critical failures: NONE 00212 summary 00213 summary High failures: NONE 00214 summary 00215 summary Medium failures: 2 00216 summary cpufreq test, at 1 log line: 193 00217 summary "Processors are set to SW_ANY." 00218 summary cpufreq test, at 1 log line: 195 00219 summary "Firmware not implementing hardware coordination cleanly. Firmware using SW_ANY instead?." 00220 summary 00221 summary Low failures: NONE 00222 summary 00223 summary Other failures: NONE 00224 summary 00225 summary Test |Pass |Fail |Abort|Warn |Skip |Info | 00226 summary ---------------+-----+-----+-----+-----+-----+-----+ 00227 summary cpufreq | | 2| | | | | 00228 summary ---------------+-----+-----+-----+-----+-----+-----+ 00229 summary Total: | 0| 2| 0| 0| 0| 0| 00230 summary ---------------+-----+-----+-----+-----+-----+-----+ rabbit@rabbit-Lenovo-V570:~$

    Read the article

  • modalpopupextender and commas appearing in my textbox asp.net

    - by SLC
    Some weird stuff is happening, I am converting an application that used to use javascript to open another web page in a tiny window for data input to use a ModalPopupExtender. It seems to work fine, but in the OK event, when I do txtData.Text (the textbox in my modal popup), it comes back with a comma before the data, so if you type "Rabbit", it comes back as ",Rabbit". Also when I use it multiple times, in another place where I might click to show it, and type "Fish", it starts coming back with stuff like ",Rabbit,,Fish" I don't know why or how to stop it from doing this... any ideas?

    Read the article

  • rhythmbox plugin code for hot key not working

    - by Bunny Rabbit
    def activate(self,shell): self.shell = shell self.copy_selected() self.action = gtk.Action ('foo','bar','baz',None) self.activate_id = self.action.connect ('activate', self.call_bk_fn,self.shell) self.action_group = gtk.ActionGroup ('hot_key_action_group') self.action_group.add_action_with_accel (self.action, "<control>E") uim = shell.get_ui_manager () uim.insert_action_group (self.action_group, 0) uim.ensure_update () def call_bk_fn(): print('hello world') i am using the above code in a plugin for rhythmbox ,and here i am trying to register the key ctr+e so that the call_bk_fn gets called whenever the key combination is pressed , but its not working why is that so ?

    Read the article

  • Warning about SSL ceritificate, am I under attack ?

    - by Bunny Rabbit
    Lately I've been getting a lot of warnings about SSL certifications on my pc, Empathy keeps telling me that Facebook's certificate is self-signed and can't be trusted, and also, there are occasional warnings in Google-Chrome about security. I remember the last one saying that that the page is secured but some of the resources that the page is using are not from a secure connection, something like that. Is my pc hacked / under attack? How can I check that, and if so, how can I safeguard myself? PS: One thing that comes to my mind is that I might be under an arp poisoning / spoofing attack.

    Read the article

  • SAP vs Other Technologies

    - by Bunny Rabbit
    I am a fresher just out of collge .Till now i have worked on java,Python,javascript,groovy,django,JS, JQuery and web application develop has been my only intrest. I have been working for an IT company for past three months and it involves working with an erp package SAP and i am working on ABAP. Coming from a world of ORM and languages like python ,SAP and database tables doen't excite me much. With all the development being happening around HTML 5 and android etc i feel quite left out and bored in SAP . can you guys suggest me a proper way forward ?

    Read the article

  • Is there a CDN for backbone.marionette?

    - by Thunder Rabbit
    Getting started with Backbone and Marionette, I was about to copy the file at https://github.com/marionettejs/backbone.marionette/blob/master/lib/backbone.marionette.js to my local server, but wondered if there was a CDN version of it. For Underscore and Backbone dev, I'm including these two files, respectively: http://documentcloud.github.com/underscore/underscore-min.js http://documentcloud.github.com/backbone/backbone-min.js Is there a similar URL for backbone.marrionette.js?

    Read the article

  • Rhythmbox plugin code for hot key not working - why?

    - by Bunny Rabbit
    def activate(self,shell): self.shell = shell self.copy_selected() self.action = gtk.Action ('foo','bar','baz',None) self.activate_id = self.action.connect ('activate', self.call_bk_fn,self.shell) self.action_group = gtk.ActionGroup ('hot_key_action_group') self.action_group.add_action_with_accel (self.action, "<control>E") uim = shell.get_ui_manager () uim.insert_action_group (self.action_group, 0) uim.ensure_update () def call_bk_fn(): print('hello world') I am using the above code in a plugin for Rhythmbox and here I am trying to register the key Ctrl+E so that the call_bk_fn gets called whenever the key combination is pressed but its not working. Why is that so ?

    Read the article

  • Setting up a DNS server for a 3rd level domain

    - by user45339
    If I would like a client to use HIS DNS for a 3rd level domain name (ie test.domain.com), how would I be able to do that? So I have domain servers ns1.domain.com + ns2.domain.com for domain.com but now I want ns1.rabbit.com and ns2.rabbit.com for test.domain.com. How can this be done? I know it's possible because I saw it at some providers. Then, as a second part (and related) part; how to set up a WHOIS for that test.domain.com? So that, if you query my server for the information about test.domain.com, it'll be different than the info on domain.com? Thanks

    Read the article

  • which linux flavour should I use to for my hosting server?

    - by rabbit
    Hi, We plan to host our website on a linux server. The site is created using java based technologies and will run on multiple instances of tomcat with apache in the front. I want to go in for a 64 bit linux OS so that I can install 64bit jvm. So my options are : Ubuntu Fedora CentOS which one (and which version) would be the most stable?

    Read the article

  • Rails 3 / RVM - Acts_as_list compiled locally - Why Can't Ruby See This Gem?

    - by rabbit on rails
    I cannot figure out why rails/ruby cannot see this gem, despite each telling me that the gem is visible. I compiled this gem locally from a github branch since the main version seems to be broken in Rails 3. Or perhaps I am missing something else entirely. Ovid:lightserve dlipa$ gem list *** LOCAL GEMS *** .. acts_as_list (0.2.1) .. And Ovid:lightserve dlipa$ cat Gemfile ... gem "acts_as_list", "0.2.1" ... And Ovid:lightserve dlipa$ bundle install ... Using acts_as_list (0.2.1) Your bundle is updated! Use `bundle show [gemname]` to see where a bundled gem is installed But Ovid:lightserve dlipa$ r c RubyGems Environment: - RUBYGEMS VERSION: 1.6.1 - RUBY VERSION: 1.9.2 (2011-02-18 patchlevel 180) [x86_64-darwin10.6.0] - INSTALLATION DIRECTORY: /Users/dlipa/.rvm/gems/ruby-1.9.2-p180 - RUBY EXECUTABLE: /Users/dlipa/.rvm/rubies/ruby-1.9.2-p180/bin/ruby - EXECUTABLE DIRECTORY: /Users/dlipa/.rvm/gems/ruby-1.9.2-p180/bin - RUBYGEMS PLATFORMS: - ruby - x86_64-darwin-10 - GEM PATHS: - /Users/dlipa/.rvm/gems/ruby-1.9.2-p180 - /Users/dlipa/.rvm/gems/ruby-1.9.2-p180@global - GEM CONFIGURATION: - :update_sources => true - :verbose => true - :benchmark => false - :backtrace => false - :bulk_threshold => 1000 - :sources => ["http://rubygems.org/", "http://gems.github.com"] - REMOTE SOURCES: - http://rubygems.org/ - http://gems.github.com Loading development environment (Rails 3.0.5) ruby-1.9.2-p180 :001 > require 'acts_as_list' LoadError: no such file to load -- acts_as_list from /Users/dlipa/.rvm/gems/ruby-1.9.2-p180/gems/activesupport-3.0.5/lib/active_support/dependencies.rb:239:in `require' from /Users/dlipa/.rvm/gems/ruby-1.9.2-p180/gems/activesupport-3.0.5/lib/active_support/dependencies.rb:239:in `block in require' from /Users/dlipa/.rvm/gems/ruby-1.9.2-p180/gems/activesupport-3.0.5/lib/active_support/dependencies.rb:225:in `block in load_dependency' from /Users/dlipa/.rvm/gems/ruby-1.9.2-p180/gems/activesupport-3.0.5/lib/active_support/dependencies.rb:596:in `new_constants_in' from /Users/dlipa/.rvm/gems/ruby-1.9.2-p180/gems/activesupport-3.0.5/lib/active_support/dependencies.rb:225:in `load_dependency' from /Users/dlipa/.rvm/gems/ruby-1.9.2-p180/gems/activesupport-3.0.5/lib/active_support/dependencies.rb:239:in `require' from (irb):1 from /Users/dlipa/.rvm/gems/ruby-1.9.2-p180/gems/railties-3.0.5/lib/rails/commands/console.rb:44:in `start' from /Users/dlipa/.rvm/gems/ruby-1.9.2-p180/gems/railties-3.0.5/lib/rails/commands/console.rb:8:in `start' from /Users/dlipa/.rvm/gems/ruby-1.9.2-p180/gems/railties-3.0.5/lib/rails/commands.rb:23:in `<top (required)>' from script/rails:6:in `require' from script/rails:6:in `<main>' ruby-1.9.2-p180 :002 > And Ovid:lightserve dlipa$ irb ruby-1.9.2-p180 :001 > require 'acts_as_list' LoadError: no such file to load -- acts_as_list from /Users/dlipa/.rvm/rubies/ruby-1.9.2-p180/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in `require' from /Users/dlipa/.rvm/rubies/ruby-1.9.2-p180/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in `require' from (irb):1 from /Users/dlipa/.rvm/rubies/ruby-1.9.2-p180/bin/irb:16:in `<main>' ruby-1.9.2-p180 :002 > Can anyone explain why this might be happening? I'd really appreciate it! ** UPDATE -- Response to Andrew Marshall's suggestion** I changed Gemfile to read the gem directly from git, but it did not resolve the problem. Does this mean that there is a problem with this gem? The error message is not very helpful ;-) Removed: Ovid:lightserve dlipa$ bundle show acts_as_list Could not find gem 'acts_as_list' in the current bundle. Then added back via: gem "acts_as_list", :git => "git://github.com/vpereira/acts_as_list.git" Ovid:lightserve dlipa$ bundle install Updating git://github.com/vpereira/acts_as_list.git ... Same problem even though bundle show matches the commit on that page: Ovid:lightserve dlipa$ bundle show acts_as_list /Users/dlipa/.rvm/gems/ruby-1.9.2-p180/bundler/gems/acts_as_list-4cb76a8b198c Ovid:lightserve dlipa$ irb ruby-1.9.2-p180 :001 > require 'acts_as_list' LoadError: no such file to load -- acts_as_list from /Users/dlipa/.rvm/rubies/ruby-1.9.2-.. I just looked in the gem and it appears there is no file called 'acts_as_list' in the gem. So it appears to be idiosyncratic, albeit poorly reported by Rails/Ruby. The API appears to have changed to: ruby-1.9.2-p180 :003 > require 'active_record/acts/list' => nil ruby-1.9.2-p180 :004 > ActiveRecord::Acts::List => ActiveRecord::Acts::List

    Read the article

  • DataGridView Selected Row Move UP and DOWN

    - by Silly Rabbit
    How can I allow selected rows in a DataGridView (DGV) to be moved up or down. I have done this before with a ListView. Unfortunetly, for me, replacing the DGV is not an option (curses). By the way, the DGV datasource is a Generic Collection. The DGV has two buttons on the side, yes, UP & Down. Can anyone help point me in the right direction. I do have the code that I used for the ListView if it'll help (it did not help me).

    Read the article

  • jpa IllegalArgumentException exception

    - by Bunny Rabbit
    i've three entity classes in my project public class Blobx { @ManyToOne private Userx user; @Id @GeneratedValue(strategy = GenerationType.IDENTITY) private Key id; } public class Index { @Id private String keyword; @OneToMany(cascade = CascadeType.PERSIST) private List<Blobx> blobs; } public class Userx { @Id private String name; @OneToMany(mappedBy = "user") private List<Blobx>blobs; } while running the following lines app engine throws an exception em.getTransaction().begin(); em.persist(index); em.getTransaction().commit();//exception is thrown em.close(); as Caused by: java.lang.IllegalArgumentException: can't operate on multiple entity groups in a single transaction. found both Element { type: "Index" name: "function" } and Element { type: "Userx" name: "18580476422013912411" } i can't understand what's wrong?

    Read the article

1 2 3 4 5 6  | Next Page >