disk management - Page 536

Install Ruby 1.8.7 on Fedora 11/12

- by tadman

Is there a simple way to install Ruby 1.8.7 on Fedora 11 or 12 without side-stepping the yum/RPM package management system too severely? Building from source is always an option, but it tends to deploy things in irregular places and proves to be more fuss to maintain in the long run. A self-built RPM is okay, but I'm presuming there's a .rpm out there somewhere already. Rails is not especially happy with 1.8.6 and the Fedora community, for various reasons, considers 1.8.7 to be toxic and best avoided.

Read the article

I reinstalled OS X and the system was the same as before

- by slhck

Strange thing happened. I want so sell my old Macbook and therefore used a disk image of the Snow Leopard DVD that I restored onto an external drive. I booted off the drive and went through the installation steps. Now I really would like to perform "archive and install", as there might be some files that I need later, but I didn't see the option. The only options for installation I had, were, including others, optional printer drivers and Rosetta. So I just clicked through and I wasn't given any other option. After about 45 minutes, my system booted again, and voila, there was my old system. Nothing changed. How should I proceed to actually reset the system? All I have is that Snow Leopard DVD image.

Read the article

Does the Win XP/7 dual boot "missing restore points" problem apply to systems with separate hard disks for each O/S?

- by Robert Oschler

I'm in the process of installing Windows 7/64 on a system with Windows XP/32 on it. During my research, I read about a problem that occurs in the dual boot scenario where Windows XP deletes Windows 7's restore points when it accesses the Windows 7 volume: http://support.microsoft.com/kb/926185 I found a workaround but it seems pretty painful since it appears to involve using the registry to make the Windows 7 volume appear invisible or "offline" to Windows XP, making sharing disk data between the two O/S annoying since you have to use something like an external storage device to get it done: http://www.vistax64.com/tutorials/127417-system-restore-points-stop-xp-dual-boot-delete.html I was wondering if this problem only occurs with systems that have both O/S installed on the same physical hard drive (in different partitions)? In my case, I will have each O/S on a completely separate physical hard drive. Any other tips would be appreciated. -- roschler

Read the article

Installing Intel Rapid Storage Drivers makes my eSATA Drives act weird

- by Filip Ekberg

I have a HP 8530w Elitebook this Laptop got an eSATA port which I want to plug my LaCie d2 Quadra V2 1TB harddrive into. It all works well on a fresh install of Windows 7 without the Intel Chipset drivers installed. However when I install the Intel Rapid Storage drivers or the Intel Matrix software my drive seems to "disconnect" when I use it to much. I have a lot of Virtual PC's on the drive and when I start them the disk somewhat disconnects. What could cause this?

Read the article

Missing partition on a single HDD

- by r0ca

Hi all, I reinstalled Windows XP over a windows 7 Ultimate. I have a SATA HDD (320go) and now that I installed Windows XP pro, I only see a C:\ drive with 130go. So basically, my 2 other partitions are gone... where?!?! In my computer I only see the C:\ drive. In Computer Management, I only see Disk0 as my C:\ drive. 130go still. Is there an apps that can recover my 2 "lost" partitions or I would need to perform something else? Thanks! David.

Read the article

Moving files fails due to privileges but they seem to be OK

- by joaoc

I am trying to copy old files from an OS X 10.5.8 to a new external HD. When trying to copy a folder I get the message: The operation cannot be completed because you do not have sufficient privileges for some of the items. I've checked the privileges and they seem ok (read & write for me). What is curious is that the folder is created empty on the target drive and I can then copy the contents from inside the original folder to inside the new folder without changing anything else. This happens with several folders but not all and is making backup a pain. I have to figure out which folder broke the copy, copy its contents to the external disk and then select what hasn't been copied to copy (and eventually stop at some point and repeating the experience)

Read the article

Computer shutsdowns when trying to boot

- by Zexanima

I have an IBM ThinkCentre, and I was talking to someone on Skype when it suddenly just shutoff. When I rebooted it asked me to start windows normally or in safe mode, but as soon I choose an option (Any of them) it shuts back down. So I thought it was a problem with windows and tired booting from a Hirens disk, but same thing. I've been using this computer without problems for over a year know. Any idea's for me to try? Unfortunatly I don't have any powersupplies or extra RAM to switch out to try anything like that. EDIT I left it off for a while and it's booting to windows now. I would still like to know what might have been causing it to do that if you have any ideas.

Read the article

Linux, fdisk: change order of partitions

- by osgx

I have a harddrive with 24 logical partitions on it. Half of them are Linux and half are windows. Current ordering is: 3 Linux partitions; 12 windows partitions; 9 Linux partitions. In this setup, Windows can access any of partition (no limits on partition number), but Linux can't access sda16, sda17 ... Can I change numbering of partitions without moving them on disk? I want to put all Linux partitions to be <16; and windows partitions to be 16, so linux will be able to access all linux partitions. I have fdisk/sfdisk and it sees all partitions.

Read the article

opennebula VM submission failure

- by user61175

I am new to OpenNebula, the cloud is up and running but the VM is failed to be submitted to a node. I got the following error from the log file. ERROR: Command "scp ubuntu:/opt/nebula/images/ttylinux.img node01:/var/lib/one/8/images/disk.0" failed. ERROR: Host key verification failed. Error excuting image transfer script: Host key verification failed. The key verification keeps failing. I need to know what is going wrong ... thanks :)

Read the article

VMware Server Guest OS Random Shutdown

- by radioactive21

Anyone encounter a problem in which the Guest OS in VMware Server randomly shuts down? This has happened about once a month, where VMware Server just shuts down ALL guests OS. The host machine is fine, and you can log into the web management of VMware Server, it's just all guest OS get shutdown with no apparent reason. Even the logs say vmware guest os so and so was shut down, but no details why. This is not just one one machine, we have VMware server installed on three different PowerEdge servers and they all have encounter the same problem. We've tripped checked all settings and nothing is out of the ordinary.

Read the article

Uninstall last n of ports/packages

- by Radio

While compiling some port, I realized that it depends on 1000+ of other ports and will install forever until I die or my disk is full (my hdd is really small). I interrupted make install clean. How do I uninstall and clean those dependencies which have already been built and installed? (there are at least 100+ of them) pkg_cutleaves wont work in this case, since the main port wasn't registered yet. Please help. FreeBSD 9.0-RELEASE amd64 EDIT: Another way to ask this question: How can I see all dependencies for a non-registered port, and all subdependencies for those dependencies, independent with previously installed ports or their [sub]dependencies?

Read the article

How to know my wireless card has injection enabled?

- by shrimpy

I am playing around with aircrack. And was trying to see whether my wireless card on my laptop can pass the injection test And I end up seeing the following... does it mean my wireless card is not able to run aircrack? root@myubuntu:/home/myubuntu# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"" Nickname:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-57 dBm Rx invalid nwid:0 Rx invalid crypt:781 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 root@myubuntu:/home/myubuntu# aireplay-ng -9 eth1 ioctl(SIOCSIWMODE) failed: Invalid argument ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start eth1 <#>' Sysfs injection support was not found either. root@myubuntu:/home/myubuntu#

Read the article

Postgres 9.0 locking up, 100% CPU

- by Jake

We are having a problem where our Postgres 9.0 server occasionally locks up and kills our webapp. Restarting Postgres fixes the problem. Here's what I've been able to observe: First, usage of one CPU jumps to 100% for a few minutes Disk operations drop to ~0 during this time Database operations drop to 0 (blocks and tuples per sec) Logs show during this time: WARNING: worker took too long to start; cancelled WARNING: worker took too long to start; cancelled No Queries in logs (only those over 200ms are logged) No unusually long-running queries logged before or during Then the second CPU jumps to 100% The number of postgres processes jumps from the usual 8-10 to ~20 Matched by a spike in Postgres Blocks per second (about twice normal) Logs show LOG: could not accept SSL connection: EOF detected Queries are running but slow Restarting postgres returns everything to normal Setup: Server: Amazon EC2 Large Ubuntu 10.04.2 LTS Postgres 9.0.3 Dedicated DB server Does anyone have any idea what's causing this? Or any suggestions about what else I should be checking out?

Read the article

Ext3 partition doesn't mount on Snow Leopard using MacFUSE

- by Fez

I'm dual-booting OS X and Ubuntu on a Macbook 4,1. I'm trying to mount my Linux partition in OS X. I installed MacFUSE 2.0.3,2 and fuse-ext2-0.0.7 on Snow Leopard 10.6.5. I created the directory /Volumes/Ubuntu and tried to mount the disk there using the command: fuse-ext2 /dev/disk0s4 /Volumes/Ubuntu/ This is the output I get: fuse-ext2: version:'0.0.7', fuse_version:'27' [main (../../fuse-ext2/fuse-ext2.c:324)] fuse-ext2: enter [do_probe (../../fuse-ext2/do_probe.c:30)] fuse-ext2: Error while trying to open /dev/disk0s4 (rc=13) [do_probe (../../fuse-ext2/do_probe.c:34)] fuse-ext2: Probe failed [main (../../fuse-ext2/fuse-ext2.c:340)] Any clue what's going wrong? Thanks!

Read the article

Unable to access router even though internet works

- by Tom Kaufmann

I had access to my router and my internet was also working fine, but I was trying to do a port forward of 80 to my local machine and in the process I made a mistake. I went into Remote Management and for port 80 there were a few options like LAN, WAN, All. I accidently clicked "all" and then clicked "Disable". The problem is that I am no more able to access my router using 192.168.1.1, although my internet works. If I do a ping 192.168.1.1 I am able to receive the response, but I am no longer able to browse the internet. How can I fix this issue? I am using a zyxel p-660hn-t1a router given by my ISP.

Read the article

Lion refuses to be installed to any partitions on Mac

- by Arafinwe

I was attempting to install Lion on my MacBook 7-1, on which I have installed Ubuntu 10.04 on a separate partition. Currently, my partitions look like this: |-----Mac-----|-Grub-|----Ubuntu----|-Ubuntu Swap-|. However, Disk Utility (and I assume the rest of Mac OS X) sees it as |-----Mac-----|-----Unknown-----|. Note that I am using rEfit as my default bootloader. When attempting to install Lion, I am greeted by this screen: By the way, it appears that only the Grub partition is recognized, as I remember setting it to about 10 MB. Can anyone help with this?

Read the article

Ubuntu only boots with USB plugged in

- by Ben

Read the article

How to determine source of file corruption for downloaded images?

- by sunpech

I've been downloading Visual Studio 2010 off of the Dreamspark.com website using Akamai Downloader. The .img file is 2.2 GB in size. I've downloaded it twice so far, and when I try to mount it using Gizmo, it complains that "the disk structure is corrupted and unreadable". The drive does mount, but it is unreadable. Is there a way to determine where the source of the data corruption is coming from? Is it my computer as it's receiving it? The hosting server(s)? My ISP? My router? My ethernet cable? It's a hefty download to do again and again from home, only to find out once it's fully downloaded that it's unreadable. I think I can almost rule out my PC, router, and ethernet cable, as I've been able to download various other files without corruption. Note: There is no checksum to verify against

Read the article

gparted won't boot from liveCD

- by ant2009

Hello, Fedora 12 2.6.32.9-70.fc12.i686 I downloaded the gparted iso and burnt it to a CD. gparted-live-0.5.2-1 This GParted Live was created by: create-gparted-live -l en -b u -e e -d sid -m http://free.nchc.org.tw/debian -s http://free.nchc.org.tw/debian-security -g http://free.nchc.org.tw/drbl-core -n 2.6.32-3 -i 0.5.2-1 The files and folders: isolinux live syslinux COPYING GParted-Live-Version I put the disk in and reboot. Nothing happens. I just get a flashing cursor in the top left hand corner. I then have to switch of the power button to get it to reboot. I have done this a number of time and the results are the same. Can anyone tell me how to boot from the gparted liveCD? Many thanks for any suggestions,

Read the article

Cleaning Up Unused Users and Groups (Ubuntu 10.10 Server)

- by PhpMyCoder

Hello experts, I'm very much a beginner when it comes to Ubuntu and I've been learning the ropes by diving in and writing a (backend-language independent) web app framework that relies on apache, some clever mod_rewrites, Ubuntu permissions, groups, and users. One thing that really annoys my inner clean-freak is that there are loads of users and groups that are created when Ubuntu is installed that are never used (Or so I think). Since I'm just running a simple web app server, I would like to know: What users/groups can I remove? Since you'll probably ask for it...here's a list of all the users on my box (excluding the ones I know that I need): root daemon bin sys sync man lp mail uucp proxy backup list irc gnats nobody libuuid syslog And a list of all of the groups: root daemon bin sys adm tty disk lp mail uucp man proxy kmem dialout fax voice cdrom floppy tape sudo audio dip backup operator list irc src gnats shadow utmp video sasl plugdev users nogroup libuuid crontab syslog fuse mlocate ssl-cert lpadmin sambashare admin

Read the article

Migrated SQL Server database suddenly in "Restoring" state

- by Pete Montgomery

Edit: This is still a live prob, less than an hour after trying RESTORE ... WITH RECOVERY. I backed up a SQL Server 2005 database and restored it to a new SQL 2008 instance. The restore was quick and successful. Everything was fine for an hour or so. Suddenly, the database is now stuck in "(Restoring...)" state in Management Studio and has a green arrow icon, and my application login is failing! Any advice? :-) Edit: This is a live application. If I delete and try again, the hour or so's data will be lost.

Read the article

Installing Windows Server 2003 on AMD environment

- by santhosh kumar

Hi all, Our organisation we have 25 computers and we are trying to setup Windows Server 2003. We are planning to configure Active Directory NAT DNS server Visual Studio Team Foundation Server Subversion (SVN) Trac (Bug tracking tool) FTP server And our Hardware configuration is AMD Athlon 64 X2 Dual (Core processor 5600+, 2.60 GHz) Asus motherboard (M2N series) Transcend 4 GB RAM (800 MHz) 500 GB Hard Disk (RAID enabled) But my colleague is advising me AMD won't suite for servers platforms, and use Intel environment. Also they telling we can't install all the services to one server. I got confusion what to do?... Is really can`t install above services to AMD computer? Thanks...

Read the article

Horizontal scrolling not working in Windows 7 running on MBP using Boot Camp

- by Rubicon

Is there a way to enable horizontal scrolling on Windows installed on a bootcamp partition of MBP 13" Core 2 Duo, using a trackpad? I had a look into the Boot Camp Control panel settings, but could not find a setting that suggested this. I used the Boot Camp drivers that came with the MBP in the Mac OS X Install disk. The vertical scroll is working fine, and the horizontal scroll works fine in the Mac world of things, so the hardware is fine. I think maybe there might be an additional install for a driver that we may have to install? Or any update? Thanks in advance for all your help. :)

Read the article

Small web server hardware advice

- by Dmitri

We need to build a new web server for our organization. We have around 100 hundred small traffic web sites, so our hardware requirements are not too tough. We run CentOS 6, Varnish+Apache, PHP, MySQL, Typo3 CMS for most of websites. Here's a hardware we want to buy: SuperMicro X9SCA-F-O (we need to have a remote management capability) (or better X9SCM-F?) Intel Xeon E3-1220 v2 2*4Gb DDR-III 1600MHz Kingston ECC (KVR16E11/4) (currently we have 4gb, and it feels like enough, so no reason for 16gb yet). Procase EB140-B-0 (1 unit) PSU 350W Procase MG1350, Active PFC We already have: Intel 335 120GB SSD (for OS, databases and important websites). 2*2tb WD Green RAID1 (for other data and backups). Does it look like a reasonable choice for our needs? Any issues with hardware compatibility? Any other notes?

Read the article

Mac OS X - rmdir fails with "Operation not permitted" for a folder created by a PC on a removable dr

- by maxint

Hello. I have a problem (using Mac OS X 10.5.8) with the access rights of a folder that was presumably created by a virus on a disk-on-key drive when I used it with a PC. I can't remove the folder or change it's name. In Finder's Info window the Lock box is unchecked and uncheckable - if I try to check it it flips back to off. Please see the details: MaxBookAir:GARMIN'S maxint$ rmdir winamp_cache_0001/ rmdir: winamp_cache_0001/: Operation not permitted MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ mv winamp_cache_0001 test mv: rename winamp_cache_0001 to test: Operation not permitted MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ GetFileInfo winamp_cache_0001 directory: "/Volumes/GARMIN'S/winamp_cache_0001" attributes: avbstclinmedz created: 12/23/2009 14:34:52 modified: 02/13/2010 22:52:36 MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ stat -x winamp_cache_0001 File: "winamp_cache_0001" Size: 32768 FileType: Directory Mode: (0777/drwxrwxrwx) Uid: ( 502/ maxint) Gid: ( 20/ staff) Device: 14,5 Inode: 7439 Links: 1 Access: Wed Dec 23 00:00:00 2009 Modify: Sat Feb 13 22:52:36 2010 Change: Sat Feb 13 22:52:36 2010 MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ stat -r winamp_cache_0001 234881029 7439 040777 1 502 20 0 32768 1261506600 1266081756 1266081756 1261559092 131072 64 32768 winamp_cache_0001 MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ ls -lTd winamp_cache_0001/ drwxrwxrwx 1 maxint staff 32768 Feb 13 22:52:36 2010 winamp_cache_0001/ MaxBookAir:GARMIN'S maxint$

Search Results

Search found 20358 results on 815 pages for 'disk management'.

Page 536/815 | < Previous Page | 532 533 534 535 536 537 538 539 540 541 542 543 | Next Page >

- by tadman

- by slhck

- by Robert Oschler

- by Filip Ekberg

- by r0ca

- by joaoc

- by Zexanima

- by osgx

- by user61175

- by radioactive21

- by Radio

- by shrimpy

- by Jake

- by Fez

- by Tom Kaufmann

- by Arafinwe

- by Ben

- by sunpech

- by ant2009

- by PhpMyCoder

- by Pete Montgomery

- by santhosh kumar

- by Rubicon

- by Dmitri

- by maxint

< Previous Page | 532 533 534 535 536 537 538 539 540 541 542 543 | Next Page >