Search Results

Search found 15913 results on 637 pages for 'screen'.

Page 536/637 | < Previous Page | 532 533 534 535 536 537 538 539 540 541 542 543  | Next Page >

• Computer does not boot after ram upgrade

  - by Calmarius

  I have a Dell Optiplex GX520 desktop (it's abount 5 yr old) PC with 512 MB DDR2 RAM. Since my computer always swapping I thought I should upgrade my RAM. I bought a Kingmax 2GB DDR2 RAM. But my system does not boot. The status leds are on 2 and 4. The user manual says 'video card failure' wtf? I put back the original module and everything works. I tried many combinations. When I leave the old 512 RAM in and put the 2GB next to it to the other socket my system completes the POST and I'm able to enter the BIOS menu. It says my system has 2.5 GB installed, one 0.5GB and one 2GB in dual asymmetric channel mode. It's seemingly right. Exiting the BIOS setup GRUB loads successfully, but when I try to boot Ubuntu it crashes with kernel panic immediately. Trying to load Windows XP does not get past the loading screen, it crashes with 0x8E stop error. Does this mean the ram I bought is faulty? Or is it just mean that the memory module I bought is too new to be handled my computer? I this case I may exchange the RAM with my friends. No other computer is in my house (my very old box has DDR1 ram, my systers new box has DDR3 ones. I can't plug my memory in neither one.) I'm going to return the RAM to store to replace it with a better one tomorrow. Is there any hope to get this new module work?

  Read the article

• iMac 20inch (Mid 2007) SL DVD Boot Prohibitory Sign

  - by Caitlann Lloyd

  iMac 20inch (Mid 2007 Build) with Ubuntu 12.0.4 How I got in this situation I had a perfectly healthy Intel iMac running Snow Leopard several months ago. Then I got the dreaded spinning gear and several kernel panics. After getting a little frustrated (failing to find a solution online), I found an old macbook installation disk and used it to access Disk Utility. From here, I erased my entire hard drive leaving me with no OS. I then created a Ubuntu DVD and installed Ubuntu onto the system. Now, on Ubuntu, I wine installed Transmac and burned a Single layer copy (with languages, etc. removed to save space) of Snow Leopard onto a 4.7GB DVD. I tried to boot from it and was met with first the grey apple screen and a spinning cog before the grey apple shortly turned into the infamous prohibitory sign. Note: I met this problem previously when using Disk Utility to create a bootable USB of Snow Leopard, hence I severely doubt it has anything to do with the DVD created. Resources at my disposal 1 x iMac running Ubuntu 6 x 4.7GB DVDs 1 x USB Stick 12GB 1 x Windows 7 Laptop Resources I do not have Firewire cables Access to a prebuilt retail disk (Misplaced) Access to another Mac Apple Warranty I would be hugely grateful if someone was able to tell me how to install Snow Leopard again.

  Read the article

• "Enter/Return" Key with Word Mobile on Windows Mobile

  - by Maarx

  Some of our employees are using PDAs running Windows Mobile. I wish I could provide more data regarding versions, but frankly these things aren't my jurisdiction. Someone's simply come to me looking for what they thought would be a quick fix. They're using Word Mobile and the barcode scanner to record large volumes of data. The scanner's default action is to insert the scanned text exactly as if it had been input with the keyboard, and puts a newline at the end. That's great, because it's exactly what we need it to do: separate data with newlines. The issue comes when system can't read the barcode, and the employee has to type in the data by hand. They've discovered a very peculiar quirk of Mobile applications: pressing the hardware Enter/Return key on the keyboard appears to save and exit the application. How do we change this behavior? They've realized that using the stylus to "click" the virtual on-screen keyboard's Enter/Return key will add the necessary newline, but it's a huge inconvenience for them. How do I fix the default behavior of the Enter/Return key for Word Mobile to instead insert a newline?

  Read the article

• Save and restore multiple layers within a Photoshop action that flattens

  - by SuitCase

  I'm editing comic pages with layers - "background", "foreground", "lineart" and "over lineart". I have a Photoshop action that includes a Mode-Bitmap command, which requires the image to be flattened. I need this part of the action because I use the Halftone Screen method of reducing the greyscale image to bitmap on the "background" layer, creating a certain effect. I am pretty sure there is no filter or anything else that gives the same effect. After the mode is changed to bitmap, my action changes things back to greyscale for further changes. This poses a problem. I only want to do the bitmap mode change on the background layer, and after I do the change I want to restore the layer structure as it was - with the foreground, lineart and over lineart layers back above the now-halftoned background. My current method of saving these layers and restoring them is clumsy. My action is able to automatically save the "foreground" layer by selecting it, cutting it, then pasting it back in after the mode changing is over. But, for the "ink" and "over ink" layers, I have to manually cut these layers, paste them into a new document, and later re-cut and re-paste after running my action. This is so clunky! What I would like to know is if it's possible to set aside my layers in an automated way, and then bring them back in, also in an automated way. An ugly (but functional) solution would be to replicate my actions of creating new documents and pasting them temporarily there, but I don't think Photoshop allows you to do things outside of your current document with an action. It seems to me that the only way to do what I want is to use the "hack" of incorporating the clipboard into the action as a clever hack, but that leaves me stuck as I have two more layers that can't fit onto that same clipboard. Help or suggestions would be appreciated. I can keep on doing it manually, but to have a comprehensive action would save me a ton of time.

  Read the article

• LogMeIn style remote access to NAS drive

  - by Mere Development

  I've been asked to setup some remote access to a NAS drive. The NAS drive will sit on a VLAN inside a network that uses a Cisco 891 IS router as gateway. The charity have no SSL-VPN licenses for the Cisco. At present there are no open ports or services on the Cisco itself and ideally we would like to keep it that way for a while, hence the request for a LogMeIn style service that's initiated from inside. We need multiple user access, about 10 max. Using LogMeIn on a machine connected to the NAS would only provide screen sharing I believe, and no concurrent connections (could be wrong?) The end users need to be able to read and write files to the NAS from Mac's and PC's around the globe. Read-only access from Mobile devices would be a bonus but not absolutely necessary. This is for a charity, non-commercial, but they are willing to spend if necessary. Cisco config knowledge is at a minimum so if I can avoid upsetting that delicate device I'll be happy :) Anyone have any clever ideas? I can provide more information on request. Thanks, Ben

  Read the article

• Can I convert an existing Firefox installation to ESR without a re-install?

  - by Iszi

  It took some jumping through hoops (including a mailing list subscription that I apparently didn't need) but I finally found where to download the Firefox ESR. This is great for fresh installs, but I was wondering if there's a way to simply convert existing installations to the ESR configuration without having to do a full install. As I understand it, the only difference between ESR and regular Firefox will be how they receive updates. After the new standard version of Firefox comes out, ESR releases will only receive critical security updates and bug fixes for the remainder of their support life. Newer versions of Firefox's standard build will have all the latest and greatest features, while ESR releases are meant to provide stability for environments that can't be expected to keep up with a new full version number change as often as Mozilla does them. In regular Firefox, the About screen shows that I am using the "release" update channel. Is switching to ESR really just a matter of switching the update channel? I presume this can be done in about:config by changing app.update.channel and probably also app.update.url. However, I don't know what these values should be for ESR or if anything else should be tweaked. So, is it possible to switch to ESR without a reinstall and, if so, how? (Note: While this question was written originally for Firefox 10, I expect any answers will apply to future ESR versions as well.)

  Read the article

• VNC from Windows to OS X Lion: App stuck in fullscreen mode

  - by Jonny

  I'm connecting to a remote Mac through a Windows. ahh it gets more complicated than that. I'm sitting by my iMac. I use Virtual Box in it to launch Windows 7. In it I have a VPN connection to a remote Windows network, which allows me to use Remote Desktop to one of the Windows (Vista!) boxes over there. From that Vista box I VNC into a Mac OS X Lion. (Don't ask me why, but that Mac doesn't have a public ip which prevents me from accessing it in the first place.) So: OSXLion - (virtual)Windows7 - Windows Vista - OSX Lion That last Mac was recently upgraded from Snow Leopard. Now with Lion, sometimes apps run in fullscreen. Somehow I can't get out of that fullscreen. Normally you'd move the mouse pointer to the top of screen and a menu list bar drops down allowing you to reach the fullscreen button top right. Now, in my current setup that menu list bar never drops down on the remote Mac at the end of the line. Any ideas?

  Read the article

• Repairing hard disk when Windows installation disk won't boot

  - by Echows

  I'm trying to recover some data from a faulty hard disk with Windows installed on it (on which Windows won't even boot). I have tried so far: Booting to Ubuntu live USB stick and running ntfsfix (didn't work) Trying to mount the broken partition when running Ubuntu from usb stick (doesn't mount) Running photorec image recovery tool from live Ubuntu (it found some stuff but not the images I was looking for) Now as a last resort I got myself a Windows installation on a USB stick so that I can try fdisk, but the installer doesn't work. The loading screen shows up and then the installer crashes. The installer works fine on other computers. I suspect that the installer is trying to read the hard drive to see if there's something there but when it can't read one partition, it crashes. On Ubuntu, I can mount other partitions except the one I'm interested in so at least the hard drive is not completely dead. So the question is, what options do I have left? To be more specific, my goal is to recover some images from the faulty ntfs-partition on the hard drive. Other than that, I don't care about the contents of the hard disk.

  Read the article

• Show full URI/URL in Chrome's developer tools Network tab

  - by Lev

  When using Chrome to debug, I find it incredibly difficult to be efficient due to the fact that I don't see how I can force the "Network" tab of the developer tools to show the full request URI. It will show the full URI if you hover the link and wait a second, but this is incredibly counterproductive. All of my AJAX requests are sent to ajax.php, and handled by using query string arguments, like: ajax.php?do=profile-set ajax.php?do=game-save ... etc. Since I use AJAX extensively, my network tab is filled with "ajax.php", but I have to manually hover each and every entry to find the request I am looking for. Surely there has got to be another way!? I am constantly fed up by something new in Firefox and immediately force myself back into Chrome, but it is always the developer tools in Chrome that keep me from using it for an extended period of time. Hopefully I can find out how to do this so I can continue using Chrome as my numero uno. I've provided a screen shot to show you where I mean:

  Read the article

• Debugging Windows PC freeze

  - by Violet Giraffe

  I have a problem with my computer, would appreciate any hints/ideas. It usually begins not immediately after booting Windows, but at some unpredictable point in time, which doesn't seem to correlate with any specific actions of mine. First sign of a problem is process System starting to consume 25% CPU time steadily. I have a quad-core CPU, so it might be one thread working non-stop. At this point micro-freezes start to occur - screen stops refreshing, but if I have, say, music player running - it continues playing. If I try to do something between the freezes, like open Start menu, it will freeze completely and forever. If I press reset button the PC will shut down and then start cold, as opposed to usual reset behavior (which doesn't include PC shutting down). I have noticed that full restart upon reset is usual for hardware problems, but I think this problem isn't related to at least motherboard-CPU-RAM-videoadapter. It certainly isn't caused by overheating. One very important not is that it seems to be related to Windows hosted WLAN network: I have USB Wi-Fi dongle and have configured a hosted network to share cable Internet connection with Wi-Fi devices. I am not 100% certain there's a strong connection, but in 9 or 10 cases when I enabled the network (by executing netsh wlan start hostednetwork), it did freeze eventually (sometimes within minutes of starting the network, sometimes within hours), and on at least 10 days when I didn't start the network it never froze, no matter how I used the computer). There are no critical/error entries in the events log that I can suspect as being related, only regular stuff like "driver not loaded". I have found no critical/error events that are being logged around the time of freeze occurring and are not logged during normal boot without starting the WLAN.

  Read the article

• How do I use key combinations on an axis on a joystick in xorg?

  - by valadil

  I'm using xserver-xorg-input-joystick on Debian Stable so I can use a joystick in place of the mouse. I have mouse movement working correctly, but got stuck trying to add functions for some other keys. These work: #Left stick #Pointer Option "MapAxis1" "mode=relative axis=1.5x" Option "MapAxis2" "mode=relative axis=1.5y" #Right stick #Arrow keys Option "MapAxis4" "mode=relative keylow=Left keyhigh=Right" Option "MapAxis5" "mode=relative keylow=Up keyhigh=Down" But when I try to make key combos (so I can navigate windows and screens in xmonad) I have no luck. #dpad #xmonad focus #up/down toggle window. l/r choose screen. Option "MapAxis8" "mode=relative keylow=Super_L,k keyhigh=Super_L,j" Option "MapAxis7" "mode=relative keylow=Super_L,w keyhigh=Super_L,e" I've also tried Super_R, plain old Super, Meta, and mod4mask, and anything else I can think of. These buttons print the letter, but don't appear to hold down the modifying key. The exception to that is shift. If I specify Shift_L or Shift_R, I get a capital letter. xev indicates that modifier keys are being pressed. If I lower Axis8, I get press Super_L, press k, release k, release Super_L. That looks like it should be working. Maybe this is an xmonad problem and not a joystick driver one? I'm also having trouble with getting an axis to use other XF86 keys: # triggers # song selection Option "MapAxis3" "mode=relative keylow=none keyhigh=XF86AudioForward" Option "MapAxis6" "mode=relative keylow=none keyhigh=XF86AudioBack" That does nothing. Any idea why? If it turns out that this isn't something I can do on an axis, but would work with a button, is there a way to treat my joysticks as buttons? Also, if anyone has suggestions for the other 5 buttons I'll have left after mouse buttons are bound, I'm listening.

  Read the article

• How to play 24 fps video smoothly on a 60Hz display?

  - by netvope

  I use mpc-hc to play videos on Win7 x64. With the default settings (#1), video playback is great most of the time. But for panning shots, playback is not smooth. I stepped through the video frame by frame and found that the panning movement is smooth (e.g. each frame shifts horizontally by 10 pixels), so the problem is how the 23.976 fps video is interpolated to 60Hz. The judder looks like what would be caused by a "2:3 pulldown", where the frames are played unevenly like: frame 1, 1, 2, 2, 2, 3, 3, 4, 4, 4, etc (#2) Using "optimal renderer settings" (#3) instead of the default disables the Aero theme and causes tearing. Setting my LCD display to 50Hz may have improved the judder slightly (but I can't really tell). My display does not support 24Hz or 48Hz, and forcing them in the Nvidia control panel gives blurry screen. I've tried other video players (VLC and KMPlayer), the ReClock Directshow Filter, video files from different sources (#4), turning on/off DXVA, and a computer with a different GPU, but the judder in the playback is similar. None of them solved the problem. So, how can I play 23.976 or 24 fps video smoothly on a 60Hz display? I think a video player could make the video smoother by doing linear interpolation, such as: 1. 100% frame 1 2. 60% frame 1 + 40% frame 2 3. 20% frame 1 + 80% frame 2 4. 80% frame 2 + 20% frame 3 5. 40% frame 2 + 60% frame 3 6. 100% frame 3 7. 60% frame 3 + 40% frame 4 .. etc Can any existing video player do this? Footnotes: (#1) Video renderer: EVR Custom Pres. (#2) This example converts a 24 fps video into 30 fps (#3) View Renderer settings Reset Reset to optimal renderer settings (#4) The files I have are all H.264 mkv files, but I don't think the file format/encoding matters.

  Read the article

• New build won't boot: some fans turning, no beep or video

  - by Dave

  When my new system is powered up, the case fan and power supply fans turn fine. The CPU fan twitches, but never gets going. Although I've heard that with AMDs and Gigabyte motherboards that is not necessary a problem. Hard drive is spinning. However, there is absolutely no indication that anything else is happening. The motherboard, as far as I can tell, does not have an internal speaker, but I harvested one from another machine and plugged it in and still no beeps at all. The monitor screen stays black, on both the integrated VGA and DVI. This is a brand new build, and has never successfully booted. My parts are: AMD Athlon II X2 245 Regor 2.9GHz Socket AM3 65W Dual-Core Processor Model ADX245OCGQBOX - includes CPU cooler) GIGABYTE GA-MA785GPMT-UD2H AM3 AMD 785G HDMI Micro ATX AMD Motherboard - Retail G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL8D-4GBRM - Retail CORSAIR CMPSU-400CX 400W ATX12V V2.2 80 PLUS Certified Compatible with Core i7 Power Supply - Retail SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive COOLER MASTER Elite 341 RC-341C-KKN1-GP Black Steel MicroATX Mid Tower Computer Case - Retail I also have a DVD burner, but it acts the same whether that is plugged in or not. I'm using the on board video. What I've tried so far: I've switched power supplies, with no difference. I've tried different monitors (of which all are working on other machines) with no difference. I have tried putting it one memory module at a time, with no difference. I have tried the absolute minimum I can think of (power supply into motherboard, power button ONLY plugged into front panel, CPU fan plugged in), with no difference. I appreciate any ideas anyone might have. Do I need to RMA the motherboard? This is my first build, so there might be something obvious. I was very careful in assembly with static; I'm confident nothing was zapped during assembly.

  Read the article

• How do I diagnose the cause of a freeze after resuming in Windows XP (SP3)?

  - by Software Monkey

  I have just built a new computer from parts. Whenever I resume from any sleep mode (S1, S3 or S4) the computer freezes within about 60 seconds of the welcome screen appearing. I have updated the BIOS and all drivers to current from the motherboard manufacturer's site. I have reset BIOS settings to default, including disabling AMD Cool n Quiet. The windows event logs are not helpful at all. Other than immediately after resuming the system is stable as long as AMD CnQ is disabled. The system is: Mobo : MSI 790GX-G65 CPU : AMD Phenom II 965 BE at 3.6 GHz Memory : Corsair DDR3 1600, at 1333 MHz and 9-9-9-21 HDDs : 1 EIDE, 2 SATA in RAID-0 DVD : 1 Card Reader: 1 multi-card reader Keyboard is attached via PS2 and mouse is USB. Any thoughts or pointers would be most welcome. EDIT: It appears that the computer may not freeze if a program is left running which puts it under significant load. I left a stress test running which keeps all cores under 85% load, and my son put the computer to sleep - while this program is running it I have been able to resume from S3 successfully 4 times, compared against about 20 tests with the computer idle which have all frozen. So this may be related to being in an idle state when it resumes.

  Read the article

• Explorer.exe keeps crashing during log in

  - by asif

  I have got a weird problem. My windows 7 has two user accounts (both are administrator). I can log in to one account and do all sort of work. But whenever I try to log in to other account, it shows a blank screen and a messagebox pops up with "windows explorer has stopped working". The options available are: Close the program Check online for a solution and close the program The problem signature is as follows: Problem Event Name: InPageError Error Status Code: c000009c Faulting Media Type: 00000003 OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 If I press alt+ctrl+del and then select start task manager, it also crashes. I can not run any program using runas command (from good profile) too. The task manager and runas programs all show same problem signature. I read the similar question and followed all the steps, but no luck. Later, I viewed the event log and found that, explorer.exe could not access a file. I checked the location but the file is there. The actual message is: Windows cannot access the file C:\Users\testuser\AppData\Local\Microsoft\Windows\Caches\{AFBF9F1A-8EE8-4C77-AF34-C647E37CA0D9}.1.ver0x0000000000000020.db for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Windows Explorer because of this error. The question is, how can I resolve this issue? Should I just delete the file or replace it with another one to stop explorer.exe from crashing? offtopic: What is the content of this file and why it is necessary?

  Read the article

• How does one skip "Windows did not shut down successfully" in Win7-64?

  - by XenonofArcticus

  Migrating an app from an expensive and unreliable dedicated embedded x86 box running WinXP-embedded to COTS hardware (Dell E6410 laptop) running normal Win7-64. At this time, it's not feasible to deploy using Windows 7 embedded. The problem is, that the system is still sort of "embedded". The power could shut off at virtually any time without prior warning. We've stripped the OS down and removed the battery capability so that it will power down as desired. The app never writes to the disk, so it's not like we're going to corrupt anything terribly. The system is essentially idle after our app is up and running (with the exception of some computation, graphics, and TCP/IP and serial communications) so the OS enters a pretty stable state rather quickly. After a power-loss however, it rightly complains that Windows did not shut down successfully and presents the user with the Windows Error Recovery text screen. If left alone, it does eventually move on booting just fine, but we'd like to skip that step if possible. WinXP-embedded is designed to do this automatically, so I know it's possible. I've looked at the Kernel Switches but I didn't see anything documented for "Skip Windows Error Recovery". I've also read extensively on the startup process: http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/windows-nt-6-boot-process.html I know I can disable the auto chkdsk in the registry, but that's not the same thing either. So, how do I streamline the boot process to not hassle the user about a situation that will be the regular normal situation?

  Read the article

• trouble shooting ntfs-loop-xen combination in wubi based grub of Ubuntu

  - by Registered User

  Here is a situation I installed Ubuntu on a laptop using Wubi in Windows 7 drive.*The laptop is not mine.*I have installed and things worked by now perfectly without any problem.We are trying to set up a Xen (virtualization)environment in this laptop. After setting up every thing cleanly.When I needed to boot with following grub entries menuentry "Xen Linux 2.6.32.27" { insmod ntfs set root='(hd0,2)' loopback loop0 /ubuntu/disks/root.disk set root=(loop0) multiboot /boot/xen.gz module /boot/vmlinuz-2.6.32.27 dummy=dummy root=/dev/sda2 loop=/ubuntu/disks/root.disk ro console=tty0 module /boot/initrd.img-2.6.32.27 } I got error file not found error unknown command 'multiboot' error unknown command 'module' error unknown command 'module' Now to dig this issue further I reboot the machine and go to grub command prompt and manually pass on each of the above parameters which you see in the grub entry when I reached grub> insmod multiboot then I got following message on screen error:file not found. It looks like this wubi+ grub setup has just enough modules to use loopback file on ntfs, but the ACTUAL /boot directory is on the loopback NOT ntfs (hd0,2). Therefore any attempt to read any files from (hd0,2) simply wont work, cause there's no file there.I need to use insmod multiboot and command multiboot and module which are available in grub on a normal install without Wubi.But since the laptop is not mine so I am not allowed to partition it and have to make it work in this situation only. While a normal Kernel is still booting? How can I get module multiboot in this Wubi based install.

  Read the article

• How do I restrict the Open/Save dialog in Windows to one folder?

  - by MindModel

  I spend a significant amount of time helping non-techies use their PC's. I realized most of that time is spent trying to explain to them how the Windows folder hierarchy works, where the "open file" dialog is pointing now, and how to find that Word document they saved. All this time, they're telling me they "just want to print the file". They refuse to learn how to read the PC screen, try to memorize a fixed set of steps, and end up calling me back to tell me their files disappeared again. I realize it's not productive to try to restrict where PC apps (e.g. Quicken) store files. But if there was a Windows utility I could turn on or off that would restrict the Open/Save dialogs in Windows apps, my noob user friends and I would save an enormous amount of time. The goal would be to have all files whose locations are chosen by the Save dialog saved to one folder, and have the Open dialog always point to that folder, until the utility is turned off. Does such a Windows utility exist?

  Read the article

• Intermittent Trouble Entering Hibernate on WinXP

  - by kquinn

  My personal desktop, running 32-bit Windows XP SP2 (with 4GB RAM, 2.75GB addressable, swap disabled, hiberfil.sys existing and contiguous on C:\; SP3 is not installed because SP2 has been working fine and I do not want to re-qualify with SP3 just for sheer perversity) typically gets hibernated at night. For a long time this worked great, but recently the machine has had trouble entering hibernation. Sometimes when I press my power button (configured to hibernate), the box will start the procedure for hibernating (i.e., go to the blue "Windows XP" background logo and display a message about entering hibernation), but before displaying the usual blue-on-black hibernation progress bar it will drop back to the desktop. No error messages appear, on screen or in the system log. The only record of unsuccessful hibernation attempts in the system log, which proudly proclaims that "The Windows Image Acquisition (WIA) service entered the running state." once per failed hibernation attempt. The problem is almost certainly resource related: if I then close one or more applications which are running, and repeat the exact same process, the machine will hibernate perfectly. There does not appear to be a reliable high-water mark for virtual or physical memory use, below which the machine is guaranteed to hibernate; it's different every time (though typically, below about 1.1–1.4 GB memory usage seems to be where hibernate succeeds most often). Memory may not even be the relevant resource; as far as I know, it could also be handles or sockets. This behavior is relatively recent: it has only started in the last few months; before then, I could hibernate reliably no matter what the current resource use of the system. This machine claims to have hotfix Q909095 installed, but since the symptoms of my problem match KB909095 rather well, I'm suspicious if this fix is actually working as intended. Any ideas on how to fix this or where to start debugging?

  Read the article

• Autologin 2 Windows users OR Login another user from the desktop

  - by fpdragon

  I'm using two windows users on my HTPC at the same time. One is just for watching videos and one for administration via remote. This setup is quite ideal for me since windows can handle multiple concurrent logins and the win "rdp concurrent hack" (Google). The problem is, I want both users to be logged in automatically when the pc was started. It shall be possible to watch tv and also the admin user shall be automatically logged in to start my scripts and other tasks, even if I haven't logged in via remote desktop manually. Later, when I want to admin my htpc I can just rdp connect the admin user without interrupting the video playback on the actual HTPC's screen and check my cleanup tasks, downloads, ... witch already executed for this admin user. But right now I found no solution to automatically login user A from a user B desktop and I also found no solution to autologin both users immediately at startup. As a workaround I have to fire up my other notebook machine and login one time with the remote user via rdp. From this time on the remote admin user is running concurrent with the main user in the background of the machine. The other workaround would be... after startup switch user from main user to admin user and then back again. But that also requires manual steps. I'm on a Windows 8 System right now but all infos for Win7 or XP would be also interesting. thanks a lot for all ideas. PS: just to prevent useless posts... don't tell me that only one user can be logged in to windows. ;)

  Read the article

• Bad Intel DQ965GF motherboard? Fails memtest, but memory is good.

  - by Boden

  I've got a machine with a DQ965GF motherboard. Two days ago it started locking up hard. Ran memtest 3.3, 1.7, and TestMem 4. TestMem just freezes, memtest failed on moving 8 bit inversions. Letting memtest run eventually causes the system to restart. I pulled memory sticks one by one, and then replaced the memory with a couple of known good sticks. No luck. I switched power supplies, didn't help. Swapped video cards just to be safe. No help. When I start the machine I get a single beep before it POSTs. According to the manual, a single beep means: 1 beep - Refresh Error (with nothing on the screen and it is not a video problem) I'm assuming that the motherboard has failed since it's obviously not a RAM or power issue. Do you agree? NOTE: I also tried resetting BIOS defaults, and even flashed the BIOS to the latest version. I also ran the Mersenne Prime Test and the CPU seems to click along just fine. (Tried logging in to superuser with openid but it's not working for me today. Hope this gets through)

  Read the article

• Can't upgrade NVIDIA GeForce 310M display driver on Acer Aspire 5745PG

  - by Emerson

  I've been for days already trying to update my video driver. I have an Acer Aspire 5745PG with a "NVIDIA GeForce 310M" board, and I was trying to run Sony Vegas video editor with Boris Continunn plugins. It happened that some of the plugins, like BCC Text Extrude wouldn't work, showing the message "Insufficient depth resolution to run Blue". I then read somewhere that updating the display driver would do the trick. That was when my nightmares started, I lost already good 3 nights trying to sort this out, without success :( The display driver that was before (and that I current have after restoring) was the version 8.16.11.8997. First thing I tried was downloading the 8.17.12.6619 driver directly from Acer, which was shown as the latest version from Acer website: http://support.acer.com/product/default.aspx?modelId=2466 Running it would say "Diver Package Failure - Setup failed to read the required Display Driver to be used with this package" I then tried directly the NVIDIA own driver, which the latest was version 296.10: http://us.download.nvidia.com/Windows/296.10/296.10-notebook-win7-winvista-64bit-international-whql.exe That gave me similar error message :/ So after some researching I found out that some people had the same issue and they had to change the configuration file to allow the installer to recognize this NVIDIA board: http://forums.nvidia.com/index.php?showtopic=222904 That topic said to look for the "Device Instance Id" property of the "NVIDIA GeForce 310M" display , which I couldn't find, instead I found the "Hardware Id", which seemed to be the right one. I followed the instructions and changed the inf file first for the Acer installation, and after for the NVIDIA own driver. It actually managed to go ahead with the installation in both instances, but the only thing I got was a black screen, while the computer still apeared to be running fine. I had to hard reset, and then it would come back with generic vga driver. I could only get my display back using the recovery function. I imagine thousands of this notebook was sold, and it can't have its driver updated?? Could someone help me with this?? Thanks Echo

  Read the article

• How do you use VIM to edit tabular data (tables)? Specifically, BIND (named) DNS db files.

  - by Richard Bronosky

  I'm usually a purist when it comes to vimming. I don't like remapping keys, or learning to rely on a bunch of plugins. I like to feel just as powerful on foreign boxen as I do on my own dev box. I do, however, believe in syntax files. Even though the solution may not be a syntax file (bindzone.vim is what I use), I want it bad enough to do whatever. I regularly view or edit tab (or comma, but that would be a bonus) delimited data. I hate having to set my tabstop to some ridiculous number in order to have everything line up. Example: The BIND zone files are ~40+,6,2,5,15+. So, even though I could view them on a single screen, if I set ts=40, I cannot. I have been searching for a "dynamic tab size" solution for years, but no luck. I hate that my only good way of editing or even visualizing tabular data is to scp it to my work station and open it in Open Office. There has to be a better way.

  Read the article

• Cheap Solution for Routing a Toll Free Number to a Standard POTS Number

  - by VxJasonxV

  I do some technical work for an Internet Radio Show/Podcast, and need to fix something that has been broken for a while. The hosts have a Skype-In number to take listener calls, and for convenience sake, I bought and paid for a toll free number for a period of time. I used to use Asterlink for routing calls, but they folded and sent my number to OneBox, but they're ridiculously expensive by comparison. I'm looking for a cheap solution for this one simple task. Forward toll free calls to a skype-in number. The definition of cheap is as cheap or cheaper than Asterlink was. I paid something like $2 a month, and then the termination/call rate, which was a fraction of a sent for termination, and only whole cents after some serious time on the call. A $20 preload lasted me months at a time. I don't want to be upsold too, I want a simple web based management screen (CDR/stats are fun!), and obviously, it needs to be reliable. What vendors out there are you a fan of that solves this need?

  Read the article

• Windows 7 doesn't start anymore

  - by martani_net

  Hi, I've experienced some BSOD on windows 7 RC, and some freezing when startup, but today was big surprise, it doesn't start anymore. I tried to start on safe mode and no results too, it shows the starting animation, then a blue screen for less than a second and turns off immediately. The only thing I remember did today is update flash player under Firefox, then chrome stopped working even after logging off, and once restarting, it doesn't start anymore. Anyone experienced the same issue? any hints? [EDIT 3] Solved : Windows 7 have a very smart repair strategy, it works automatically, and it tried every possible fix, what fixed my problem was the system restore to a previous date, all this happened automatically. [EDIT2] these are the last lines in the ntbtlog.txt file Did not load driver \SystemRoot\System32\drivers\vga.sys Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Loaded driver \SystemRoot\system32\drivers\CHDRT32.sys Loaded driver \SystemRoot\system32\DRIVERS\VSTAZL3.SYS Loaded driver \SystemRoot\system32\DRIVERS\VSTDPV3.SYS Loaded driver \SystemRoot\system32\DRIVERS\VSTCNXT3.SYS Loaded driver \SystemRoot\system32\drivers\modem.sys Loaded driver \SystemRoot\system32\DRIVERS\usbccgp.sys Loaded driver \SystemRoot\System32\Drivers\usbvideo.sys [edit] this is the BSOD I get : http://twitpic.com/i87cx Thank you.

  Read the article

< Previous Page | 532 533 534 535 536 537 538 539 540 541 542 543  | Next Page >