Search Results

Search found 30871 results on 1235 pages for 'click ok'.

Page 537/1235 | < Previous Page | 533 534 535 536 537 538 539 540 541 542 543 544  | Next Page >

• nvidia ignores the resolution listed in xorg.conf, even though I have 'nvidia-settings --load-config-only' on startup

  - by ihadanny

  when my machine boots, I see a nice 1920X1080 resolution screen, but the minute I login to my user, it's reverted to an ugly 720Xwhatever. When I run nvidia-settings and select 1920X1080, it's ok again. What am I missing??? my /etc/X11/xorg.conf contains: Section "Screen" ... Option "metamodes" "nvidia-auto-select +0+0; 1920x1080 +0+0" ... EndSection I'm using unity 3.8.16 on ubuntu 11.04, and when I check on gnome-session-properties I see that I have sh -c '/usr/bin/nvidia-settings --load-config-only on my startup.

  Read the article

• Copy an Amazon EC2 Instance to use locally

  - by Excolo

  Ok, so we have a spare server I have installed Debian Wheezy on, and setup Xen on for virtual machines. It has better performance than all our ec2 instances combined, and will cost less to run (for a few various reasons) I would like to get the EC2 instances downloaded to my server, and converted to run for Xen, but im having difficulty finding anything specific. I did not setup the EC2 instances myself, and am not very familiar with them. Everything I have found (which isnt much) just says "Do XYZ" and I have no idea how to do those. So being as specific as possible would be helpful. Also, confusingly I see people writing in forums saying you can only export linux images (which mine are, Ubuntu images) but then I see on amazons export tool saying you can only export Windows server? Am I missing something here? Is that not the right place to be looking? Thanks

  Read the article

• Fixing Windows 7 explorer issues

  - by Cegorach

  OK, so here is the problem I'm hoping you guys can help me fix. On my Win7-Ult64 box, my explorer (among other things) has decided not to work. For example, if I try to use a program, say Chrome, to open a folder, I will get the message "Class not registered" (and its not program specific). In the same vein, when I go to Start-Rclick Computer-properties, nothing happens, but I can go to control panel-system properties and it will work. And other items in the control panel do nothing when I click them (and I have a feeling it is all tied together). I have already done multiple virus and spyware sweeps, so I know that isn't the problem. Any suggestions on what could be causing this/how to fix it (short of nuke and boot)?

  Read the article

• FreeNAS 8 and ext fs

  - by oraclecow

  i'm trying out freenas8 for my personal NAS, i have lots of data that was in an ubuntu server, but somehow i never got the file sharing right. on freenas things just worked. i installed on usb, tried sharing the windows disk, and i can see it on my windows 7 right away. my question is, is it ok to use ext4 fs from my ubuntu instalation ? i only saw zfs, ufs, ntfs, and ext2 option to import, i havent plugged in the disks yet, but im wondering the consequences, like if it asked to format like in windows to use. i can format the disks of course, but 5-6 TB of data juggling and reformatting is a lot of work, unnecessary work i think, does the zfs worth the trouble of formatting everything ? since i'm thinking to use it if i have to format it anyway and zfs looks more interesting than ext2.

  Read the article

• Cant checkout from WebSVN

  - by yoasqie

  I am trying to download a script from SVN. The url looks like this: http://websvn.myurl.com/list.php?repname=name_1 I am trying to download using: svn checkout --username myuser --password mypass "http://websvn.myurl.com/list.php?repname=name_1" I got "URL is not properly URI-encoded", then I changed the "?" for "%3F", and the output shows: svn: OPTIONS of 'http://websvn.myurl.com/list.php%3Frepname=name_1': 200 OK (http://websvn.myurl.com/) But nothing gets downloaded. Sorry I can't post the real URL, but it's a private project and I don't have anyone else online to ask. What am I doing wrong?

  Read the article

• xenserver: xe command never returns?

  - by ethrbunny

  I'm trying to port a xen server 6.2 pool to a new IP address range. I've got three servers total: 2 currently at their new IP but no longer in the pool and one remaining. I'm trying to set IP address information on the two disconnected ones using the xe command and all of its variants. Oddly enough, it never returns with any values. xe host-list It just sits there until I ctrl-c it. The server is still awake and responding though. I can enter other commands (EG ifconfig) and they work fine. If I enter this same command on the remaining server in the pool it works ok. I've tried restarting the toolstack and even rebooting. No change. What am I doing wrong?

  Read the article

• Firefox - built in search engine toolbar broken

  - by Victor78

  When I change the order of the search engines (Toolbar - Manage Search Engines - Move up / down - Ok) it changes the order, until I close and reopen the browser. I can't imagine that's the way it's supposed to work. I want it to stay in the order I select. I have no add-ons installed that have anything to do with search engines, nor that add any toolbars. I am not using a customized theme. Apparently this problem is rare, as Googling [ "manage search engine list" ("order reverts" OR "order changes") ] return 0 results. Firefox 3.6.12; Windows XP Pro SP3.

  Read the article

• Setting Boot and Mirror Disks correctly at the Solaris OBP

  - by Shaun Dewberry

  I am recovering a domain that was lost due to power outage on an Sun Fire E25K server. I know how to set the appropriate parameters at the openboot prompt using nvalias/devalias, boot etc. However, I do not understand how one gets from the output of show-disks {1a0} ok show-disks a) /pci@1dd,600000/SUNW,qlc@1/fp@0,0/disk b) /pci@1dd,700000/SUNW,qlc@1/fp@0,0/disk c) /pci@1dc,700000/pci@1/pci@1/scsi@2,1/disk d) /pci@1dc,700000/pci@1/pci@1/scsi@2/disk e) /pci@1bd,600000/SUNW,qlc@1/fp@0,0/disk f) /pci@1bd,700000/SUNW,qlc@1/fp@0,0/disk g) /pci@1bc,700000/pci@1/pci@1/scsi@2,1/disk h) /pci@1bc,700000/pci@1/pci@1/scsi@2/disk q) NO SELECTION Enter Selection, q to quit: to the correct full disk path. I know it is basically one of the pci/scsi paths listed above, but in all instruction or examples a string of additional characters is appended to the path to specify Targets and Units but the explanation of the path construction is never given. Could someone please explain how to construct this disk path correctly?

  Read the article

• connected ethernet without disabling wireless, now I have *two* LAN ip's?

  - by peter karasev

  Ok I'm on ubuntu 11.04, not too knowledgeable about network stuff. Usually people ask things like "wired works but wireless does not!". In m y case, I'm just curious about what it means to have both of them seemingly connected. In 'ipconfig' in shell I see that I have 192.168.1.2 for the wireless AND 192.168.1.3 for the ethernet. What does this mean for applications, does one of the two get precedence? It seems like my pages load slightly faster, so perhaps the ethernet is being used, but I could be imagining the speedup...

  Read the article

• Only show changed files while syncing from ext4 to NTFS

  - by qox

  I would like rsync to print modified and deleted files. The verbose option (-v) does print modified files but also the list of subdirectories, maybe because touched directories are considered modified. Since I sync a lot of files from a lot of subdirectories, it's impossible to see the actual changes. So, is there a way to not print directories using rsync ? Im not looking for grep -v "*/$" kind of answers since it would also exclude new directories. Command I am using: rsync -avh --delete /media/data/src /media/data/bkp And everytime it prints the list of all directories: src/dir1/ src/dir1/sdir1/ src/dir1/sdir2/ src/dir2/ ..... Thanks for your help. EDIT: Ok, after some intensive tests .. It doesn't print all directories when syncing from an ext4 partition to an ext4 and from NTFS to NTFS. It only does when syncing from ext4 to NTFS .. And options '-c' or '--omit-dir-times' don't change that.

  Read the article

• How to fix windows 7 boot process

  - by MasterCorban

  Ok so i used xp for years before i was able to get my hands on the Windows7 RC which i bought a new HDD for, and then followed the process to dual-boot. About a month ago xp started acting funny and i thought the disk might be dying. So i started using Windows7 all the time. Today i start the computer and it cant find the disk which xp was on anymore. I guess its dead. So i remove the xp HD and my computer cant start...insert bootable disk or something similar So how can i remove the primary(dead) xp disk and boot straight to Windows 7?

  Read the article

• Question about getting information off an old HD...

  - by user37983

  Ok so my old cpu was a sony vaio. its kinda old and had xp on it. My gf thrashed it - the cd drive went and she tried fixing it by messing with the configurations bios etc. the actual laptop is really fried the keyboard doesnt work, etc. However the harddrive is still intact. I tried putting the HD in my new cpu (toshiba runnig win7) and it looks like its gonna boot up it goes to the screen with the logo and the status bar starts to load. then it flashes a blue screen for a split second, and goes to the black screen where it says windows did not shut down properly and gives options to (start windows normally, safe mode, safe mode with networking, safe mode with prompts) ive tried every option but it always goes back to this screen. I need to get into the hd cuz i have very important files. is there anyway?

  Read the article

• Internet Explorer 9 beta installation problem

  - by Eric

  I'm running Vista SP2, x64. Because I wanted to test out the IE9 beta, I downloaded the English-language installer for 64-bit Vista systems. Running the installer is fine until it starts downloading required updates. The progress bar doesn't get far before it completely stops moving. Then after 20 minutes to an hour, it will tell me that there's an update I have to install, but as soon as I click OK it sends me an error message, telling me that it can't go to the url of the update which is here. So I manually enter it into my browser, which prompts me to download a standalone update. After that's been downloaded and I run it, it tells me that the update does not apply to my system. I'd appreciate any help to solving my problem.

  Read the article

• How to calculate proper amount of inode/block sizes for a linux filesystem.

  - by Donatello

  I have an old reiser filesystem which I'm going to convert to Ext3. The problem I have is to determine the proper block- and inode-sizes for this partition. The partition is 44 GB large and has to hold 3,000,000+ files of sizes between 1 kb and 10kb, how can I figure out the best ratio of inodes and blocksize? The below is something I tried which seems OK but makes the copying files incredibly slow. mkfs.ext3 -t ext3 -c -c -b 1024 -i 4096 -I 128 -v -j -O sparse_super,filetype,has_journal /dev/sdb1 Thanks.

  Read the article

• XP Clients can't copy to networkshare

  - by chewbacca76

  i have a windows 2003 domain where i have strange problem. One of our file shares is on a 2003r2 domain controller, xp clients trying to copy files on the share are always getting the error error copying file or folder filename could not be copied. path too long while windows 7 clients work fine. Nothing unusal is found in the eventlog on both the server and the client. It doesn't matter if i access the share by fqdn or ip, the path is including filename shorter than 20 characters i.e. \path\share\file.txt Copying files to other servers is fine. Reading from the shares is ok too. Happened from one day to the other, one windows update that was installed this day (kb2736233) was removed but nothing changed. thanks for any tips

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• Windows XP Log In: Can't do it. Logon Message popup.

  - by kojobino

  A friend recommended this site to me. Hope you can help! I can't seem to log into Windows. I boot my computer. The log In screen appears. I put in my user name and password, hit OK, and the following message pops up: "The system could not log you on. Make sure your user name and domain name are correct, then type your password again. Letters in your passwords must be typed using the correct case". NOTE: I have tried Safe Mode and the same message pops up. Just to be clear, I am not able to get into Windows (I'm stressing this b/c I've come across some suggestions that require you to be in Windows, which doesn't help in my case). Thanks for your assistance. -Stranded in Toronto

  Read the article

• What editor/viewer to use to inspect large text based files?

  - by Turismo

  Are there any text editors/viewers (preferably on windows but other platforms are also ok) that can handle files of 500 MB or more? The editors I checked so far (Notepad++, Notepad, Eclipse) all choked on files of that size. Edit: Many thanks for the great suggestions. I tried gvim as it was the top voted and was available on Windows. I opened the file in a reasonable time. After that scrolling and searching was very smooth as long as syntax highlighting was turned off. From the other editors mentioned TextPad and EmEditor both claim to be able to handle large files very well. EmEditor seems to be built exactly for editing large files. I'll probably try both and report back.

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• Monitor someone on server

  - by edo

  Im in the unfortunate position of having to give someone who I do not fully trust privileged access to a webserver to finish work that they never completed. They will access the server remotely (ie I will not be able to see their screen). What can be done to a) proactively limit any potential damage and b) accurately log anything they do on the server for analysis afterwards, even if things seem ok? They will be updating a web application. Thanks in advance! --- More informtion: The server is a Ubuntu AWS server.

  Read the article

• bluray playback stuttering/choppy on mac

  - by smashtastic

  I have had a few issues with bluray playback on mac with the following details: 2.4 GHz Core 2 duo NVidia 8600 m GT 256 mb ram 4 GB ram OSX Lion 10.7.5 Using VLC 2.03 for playback Files either mounted as a disc or stored on hardisk. I have tried various sources and playback is always choppy and stutters. Where the video and audio pause for a few seconds before resuming ok. If I transcode the same bluray files into mkv files play back is seemless. I am not applying any compression and the resolution is the same as is the nominal file size. For a recent example 11.2 GB m2ts and 10.5 GB mkv file. This stuttering and choppy playback of bluray files through VLC has occured for a number of different sources. For each of these sources transcoding to mkv solves the stuttering/choppiness. Any ideas on how to resolve this?

  Read the article

• Is there a way to customize items on the right side of start menu in Windows 7?

  - by Basara

  OK I know I can right click on it and select properties... But it only allows me to decide whether an item is shown or hidden. What I want is, adjust item position on the start menu right side. More specifically, I want to put the item "games" in the same group where personal folders are. It makes perfectly no sense to put "games" with "computer" and "network" in same group. Or is there a registry tweak can make this possible? Thanks.

  Read the article

• Setting up remote filesystem access without root privileges

  - by Luke Massa

  OK here's the situation. I have a computer A with complete admin access, and computer B (actually an account I login to) with very limited access. I am trying to make it so I can access a device on computer A (an external harddrive) on B. If I had more access to B, I would just mount the device on B, but I can't do that. I can ssh both directions, so theoretically I can copy data both directions, so it should be possible. I think a NFS might be helpful for me, but from what I've looked at, they all require the client to at some point perform a "mount" operation, something my client can't do. Thoughts?

  Read the article

• Twisted pair cable twists and unwanted signals issue

  - by ziaharipur

  I am confused about one point I have read the following paragraph from the networking book. “the twists in the twisted pair cable are used to avoid the unwanted signals. For example one twist, one wire is closer to the noise source and the other is farther; in the next twist the reverse is true. Twisting makes its probable that both wires are equally affected by the unwanted signal. This means that the receiver which calculate the difference between the two receives no unwanted signal.” Now ok I understood the purpose of twists but I am confused about how receiver will calculate the difference when it will receive the signal?. How unwanted signal will be eliminated ? Another thing that I want to make clear is , I am beginner please provide such an answer that can be understood.

  Read the article

• strange problem with my motherboard

  - by user19950

  i have strange problem with my computer. i tried to turn it on, the computer was started ok, but i didnt see anything on screen. i tried to understand what cause the problem. its was'nt the HD or the screen. when i opened the computer, i saw that the fan connected to my motherboard didnt work. the funny thing is that i drove to a friend of mine, so he would fix me the computer, and when we tried to open the computer there it worked somehow and the fan worked also. when i came back home the computer again didnt work and the fan didnt work as well. does someone know what can cause the problem?

  Read the article

< Previous Page | 533 534 535 536 537 538 539 540 541 542 543 544  | Next Page >