Search Results

Search found 17076 results on 684 pages for 'nightly build'.

Page 538/684 | < Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >

• Booting Debian5 (Lenny) on 2.6.16 Kernel

  - by bk

  Due to a proprietary kernel module that I don't have the source to and is very picky about what kernel versions it will load into (even with modprobe --f), I find myself in need of running a 2.6.16.XX kernel on my Debian5 machine. The machine boots fine with the 2.6.26-2 stock kernel, and I have successfully build and booted 2.6.26 and 2.6.31 based kernels by making a .deb and the ndoing dpkg -i. However, when I do the same approach for 2.6.16, the kernel hangs at boot. I'm testing this in a VMWare image, so I don't think its an issue of newer hardware not supported by the older kernel. For a working kernel, at boot I get: Uncompressing Linux.. OK booting the kernel Loading, please wait... mdadm: No devices listed in the conf file were found kinit name_to_dev_t /dev/hda5 (dev5,3) ... With 2.6.16.60, I never get the kinit message. It hangs after the mdadm line. There are no mdadm arrays on this machine, so I doubt its an issue inside the mdadm stuff, which is supposed to just error out as it does in the 2.6.26 case above, but for some reason I'm getting stuck getting into kinit. I've been banging my head against this wall so I'm very open to suggestions on how to go about troubleshooting this.

  Read the article

• How should I manage VPS email?

  - by Xeoncross

  I have been slowly learning how to run a linux VPS for a while now. Since I build websites I'm confident with running and securing a web server like nginx... or at least there haven't been any casualties yet. However, email scares me. Almost all websites require email to communicate with users. Most of the time email is only needed on my sites during registration as a means of verification. I hardly ever need to accept incoming mail back. Nevertheless, my lack off understanding of how email servers can be abused is worrying me. Not only do you need to secure email servers - you also have to prove to the world that your emails are legit and constantly fight against being blacklisted. Insuring my emails 'good name' is not something I want to devote my life too. What should someone like me do to send emails from my VPS? Should I look for a company to send email through that can worry about this for me? Should I just use google apps until my sites are large enough to worry about? Or is all this just ignorant fear and running your own email server (that actually works) really is easy?

  Read the article

• How to get multipath working for Ubuntu Server 12.04

  - by mlampi

  I'm working on a project which aims to make use of Ubuntu servers running on enterprise class hardware. In our case that means IBM HS23E blade servers, QLogic 4GB fibre channel extension cards and quite old IBM DS4500 disk array with two controllers. At the moment we have fibre channel as only boot option and Ubuntu Server 12.04 installed just fine and is able to boot without multipath. I'm not a linux professional myself but in our team we have people who will understand the technical stuff. Don't let my post confuse :) The current situation is that we have only one fibre channel connection to a single disk array controller. Real life case would be of course quite different. At minimum we should have two fibre channel ports connected to two different switches and two different controllers. However, we have no idea how to set up multipath tool. Is the DM-MPIO the right software? At minimum we should be able to boot when multiple connections are available and achieve fault tolerance when any of them should be down. Since the disk array is not the latest hardware, I managed to find RDAC driver sources only for 2.6.x kernel. And we have 3.2.x. Another issue is to build a multipath.conf. The said driver sources are from IBM support and the QLogic drivers provided to Ubuntu installer are from Ubuntu site. It seems that RHEL and SLES would have near out of the box support but that is not an option for our project. Actual questions: - What is the recommended software tool for multipath for Ubuntu Server 12.04? - Is there available pre-made configurations or templates? Does it require disk array / controller specific settings or do a more generic config work? - Do you have expriences on similar setup and like to share the knowledge? I'll provide you with any additional information you might require. Thanks in advance.

  Read the article

• HAProxy "503 Service Unavailable" for webserver running on a KVM virtual machine

  - by Menda

  I'm setting up a server with KVM (IP 192.168.0.100) and I have created inside of it one virtual machine using network bridging at 192.168.0.194. This virtual machine has an nginx instance running, which I can access from the server or from any computer computer in the internal network just typing in the browser http://192.168.0.194. However, I try configure HAProxy in the same server that hosts KVM and looking the status page of HAProxy it always shows the virtual machine as "DOWN". If I try from the server http://localhost, it should be the same than if I go to http://192.168.0.194. My goal is to build a reverse proxy, but I tried this little example and won't work. What am I doing bad? This is my config file in the server: # /etc/haproxy/haproxy.cfg global maxconn 4096 user haproxy group haproxy daemon defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen ServerStatus *:8081 mode http stats enable stats auth haproxy:haproxy listen Server *:80 mode http balance roundrobin cookie JSESSIONID prefix option httpclose option forwardfor option httpchk HEAD /check.txt HTTP/1.0 server mv1 192.168.0.194:80 cookie A check Thanks.

  Read the article

• Creating a tar file with checksums included

  - by wazoox

  Here's my problem : I need to archive to tar files a lot ( up to 60 TB) of big files (usually 30 to 40 GB each). I would like to make checksums ( md5, sha1, whatever) of these files before archiving; however not reading every file twice (once for checksumming, twice for tar'ing) is more or less a necessity to achieve a very high archiving performance (LTO-4 wants 120 MB/s sustained, and the backup window is limited). So I'd need some way to read a file, feeding a checksumming tool on one side, and building a tar to tape on the other side, something along : tar cf - files | tee tarfile.tar | md5sum - Except that I don't want the checksum of the whole archive (this sample shell code does just this) but a checksum for each individual file in the archive. I've studied GNU tar, Pax, Star options. I've looked at the source from Archive::Tar. I see no obvious way to achieve this. It looks like I'll have to hand-build something in C or similar to achieve what I need. Perl/Python/etc simply won't cut it performance-wise, and the various tar programs miss the necessary "plugin architecture". Does anyone know of any existing solution to this before I start code-churning ?

  Read the article

• Is it possible/practical to install and run Linux on a USB flash drive?

  - by Graeme Donaldson

  I'm going to replace my old 2004 vintage desktop PC soon and I have an idea of what I want to do, I'm just not sure if it's possible or realistic. In the time since I built the old PC it has slowly become less used as a PC and more as a file server, so I figured I'd build a small file server which could also function as a router/DHCP/DNS/whatever box. The idea is to base it on an Atom system. I have my eye on the Intel D510MO for the moment. This supports 2 SATA disks, and I'd prefer to dedicate those to data storage. I'd like to install Ubuntu Server or maybe Debian on a 8/16GB USB flash drive. I have seen plenty of tutorials on how to perform an installation from a USB drive, but I can't seem to find any info on actually booting and running the OS from USB flash. Is this even possible? Is it practical? This box will mostly be used for: Making backups of mine and my wife's notebooks via LAN. Will use SMB or NFS for this. Digital media storage, which will be accessed by a Mede8er box with no storage of its own. I will most likely use NFS for this.

  Read the article

• Hosting websites in our Workplace custom-built datacentre

  - by i.h4d35

  I'm faced with unique learning opportunity at work at the moment. Due to the slowdown (amongst other reasons), the powers that be at my office have decided to abandon our shared hosting providers (both shared and dedicated hosting) and have decided to host the websites at our office's datacentre. We're running 7 websites, wherein the average unique hits per day at the moment is about 900. We have 2 servers set aside for this - one is a DELL POWER EDGE 1850 (Intel Xeon 3 GHZ*2, 4GB RAM, 73GB HDD and the other is an HP DL 380 G3 (Intel Xeon 2.8 GHz, 6 GB RAM, 73 GB HDD) a) I would like to know the pros and cons of going ahead with this project.All the sites will be hosted on a single IP. In all probability, the OS is going to be CentOS. b) Do you think I should consider Virtualization into this equation (KVM/Xen)? I was thinking in terms of separate instances of the DB server and the frontend though I do not know if this is the best way to go. c) Should I be trying to use cloud stacks like OpenStack and try to make it look like websites hosted on some sort of Public Cloud? (something that I checked out here). Here is something else I came across, which looks similar to what needs to be done at our office. About the websites - Of the 7 websites, 4 are basic static websites which basically gives a whole lot of information about a few local institutions. The remaining 3 are local product-based websites developed in PHP wherein end user can view products and order them online. I am trying to take this as a learning experience wherein I can learn to build something from scratch and save the company a little something in the process. The migration needs to be completed by Easter so I guess it gives us some time (or am I being overly optimistic??). I am confused here and would appreciate all the help I can get. Thanks in advance.

  Read the article

• Custom MS-DOS / FreeDOS

  - by user1801387

  Goal : Build a custom DOS to boot into. To automate tasks like formating a drive, or doing recovery. I've been using Grub4DOS to boot into these images. So far I've looking into taking a windows repair disk ISO and extracting. I can't seem to find the autoexec.bat in the disk. I really don't know where to look for the startup configuration file to change or how to add an autoexec.bat. I've tried MS-DOS 6.22. But it lacks the diskpart tool I require. I've tried extracting the images and adding it. Then I got a boot failed. I assume that after i added it. All the files when to lower case names and I assume that the OS is case sensitive. Then I've looking into using FreeDOS. But I don't know how it works at all. Partially because I can't seem to grasp the help/wiki's information. I looked into getting a bearbones release with just the kernel and I think it's the config.sys file. But I don't have any idea on how the packaging system works to incorporate diskpart into it. So really I'm in general looking for a small bootable DOS to where I can incorporate diskpart and setup an autoexec.bat for the actual function to carry out and to boot into. Thanks :) This is just for personal use also.

  Read the article

• How do i set up a fully featured small business network?

  - by JoshReedSchramm

  This has the possibility to be a very large question but I recently acquired a few rack mount servers and the hardware necessary to run them. Unfortunately I'm a programmer with very little understanding of how to set up a good working network so I'm hoping someone on here might be able to help. What I want to do is run a domain with a series of subdomains which would all be externally accessible. The setup would live inside my home and my internet connection is your run of the mill cable model (which means a dynamic IP) I want to be able to set up a couple site, specifically: www.mycompany.com (mycompany.com with no subdomain would redirect to this) build.mycompany.com (for my continuous integration server) ruby.mycompany.com (for ruby projects) win.mycompany.com (for windows project) etc. Additionally this is still my home network so our personal machines need to be able to get on via wifi with at least the same security we have now through an out of the box router from best buy. I'm thinking i need a DNS server, DHCP server and one of those would run either no-ip or dyndns to accommodate the dynamic ip. I don't necessarily need mail but it might be helpful to have some sort of mail server i could use for testing, it doesn't need to get out to the greater internet though. So how do i set up this kinda of network? tl;dr Need to know how to set up your standard office style network in my home off my normal consumer level cable modem connection.

  Read the article

• Exchange MSExchangeIS Mailbox Store Error

  - by Bart Silverstrim

  Boss asked me to check to see if I could figure out why he's had to restart the services on the Exchange server three mornings in a row now. While going through the system logs I ran across an error from the MSExchangeIs Mailbox Store, category General, Event 9690. The message said (edited to make generalized): Exchange store 'First Storage Group\Mailbox Store (Servername)': The logical size of this database (the logical size equals the physical size of the .edb file and the .stm file minus the logical free space in each) is 22GB. This database size has exceeded the size limit of 22 GB. This database will be dismounted immediately. Hmm...happened at five in the morning, and I'm thinking this is a pretty good hint that this leads to the culprit. Thing is I'm not an Exchange expert, so I'm still googling around to figure out how to fix the problem. Any better guidance out there? Or am I barking up the wrong binary tree? Exchange System Manager reports that the server is "version 6.5 build 7638.2, SP2", standard, which I believe is Exchange 2003. It's running on Windows Server 2003 R2 Standard, SP2.

  Read the article

• installing lots of perl modules

  - by Colin Pickard

  Hi, I've been landed with the job of documenting how to install a very complicated application onto a clean server. Part of the application requires a lot of perl scripts, each of which seem to require lots of different perl modules. I don't know much about perl, and I only know one way to install the required modules. This means my documentation now looks this: Type each of these commands and accept all the defaults: sudo perl -MCPAN -e 'install JSON' sudo perl -MCPAN -e 'install Date::Simple' sudo perl -MCPAN -e 'install Log::Log4perl' sudo perl -MCPAN -e 'install Email::Simple' (.... continues for 2 more pages... ) Is there any way I can do all this one line like I can with aptitude i.e. Type the following command and go get a coffee: sudo aptitude install openssh-server libapache2-mod-perl2 build-essential ... Thank you (on behalf of the long suffering people who will be reading my document) EDIT: The best way to do this is to use the packaged versions. For the modules which were not packaged for Ubuntu 10.10 I ended up with a little perl script which I found here ) #!/usr/bin/perl -w use CPANPLUS; use strict; CPANPLUS::Backend->new( conf => { prereqs => 1 } )->install( modules => [ qw( Date::Simple File::Slurp LWP::Simple MIME::Base64 MIME::Parser MIME::QuotedPrint ) ] ); This means I can put a nice one liner in my document: sudo perl installmodules.pl

  Read the article

• What do I need to consider when buying hardware to meet my needs?

  - by Darth Android

  I'm looking to build a new computer from the ground up. I'm not sure what to look out for and need guidance and help on how to pick the hardware needed to construct my new rig. How do I know what to buy? How do I find out if a given CPU will be enough for a certain game or application that I want to run? How do I find out if a given graphics card will be enough for a certain game or application? What is important when looking at motherboards? How much memory do I need? How do I know how much wattage I need for a power supply? What size case do I need? What relevant standards do I need to read up on and be aware of? PCI, PCIe, SATA, USB 2.0, USB 3.0, etc... What "gotchas" do I need to be on the lookout for? Please keep responses generation-agnostic to ensure they will be helpful to our future users. While Stack Exchange does not permit shopping recommendations, it doesn't provide any general advice to consider when buying hardware. So, instead of just telling those that ask what to buy that it's not allowed, let's tell them how to figure out what they need. This question was Super User Question of the Week #20 Read the June 20, 2011 blog entry for more details or submit your own Question of the Week.

  Read the article

• Not playing .mov files in WMP, not loading .mov files in Windows Live Movie Maker. What am I missing?

  - by royatl

  My friend needs to create a video and she has some source files that are .MOV format. I assume they are h.264. She can view the files with QuickTime. She has a laptop running Vista, and a just-downloaded version of Windows Live Movie Maker (which I'll call LMM for short). LMM shows an 'X' icon when she tries to add one of these files to it. My machine runs Windows 7 Pro, and a slightly earlier build of LMM and has no problems editing video with these source files. I assume she's missing a codec but what can I tell her? I've looked at the answer that mentions a QuickTime DirectShow Source Filter Plugin. It mentions only playback through WMP, not editing via LMM, but is that what she needs? I didn't have to load anything like that. That project's now done (she punted and used iMovie on a Mac). But I did gain another clue. She could play a 720p .MOV file, but these were 1920x1080 files.

  Read the article

• Karmic iptables missing kernel moduyles on OpenVZ container

  - by luison

  After an unsuccessful p2v migration of my Ubuntu server to an OpenVZ container which I am stack with I thought I would give a try to a reinstall based on a clean OpenVZ template for Ubuntu 9.10 (from the OpenVZ wiki) When I try to load my iptables rules on the VM machine I've been getting errors which I believe are related to kernel modules not being loaded on the VM from the /vz/XXX.conf template model. I've been testing with a few post I've found but I was stack with the error: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Could not load /lib/modules/2.6.24-10-pve/modules.dep: No such file or directory iptables-restore v1.4.4: iptables-restore: unable to initialize table 'raw' Error occurred at line: 2 Try `iptables-restore -h' or 'iptables-restore --help' for more information. I read about the template not loading all iptables modules so I added modules to the XXX.conf of the VZ virtual machine like this: IPTABLES="ip_tables iptable_filter iptable_mangle ipt_limit ipt_multiport ipt_tos ipt_TOS ipt_REJECT ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_LOG ipt_length ip_conntrack ip_conntrack_ftp ip_conntrack_irc ipt_conntrack ipt_state ipt_helper iptable_nat ip_nat_ftp ip_nat_irc" As the error remained I read that I should build dependencies again on the virtual machine: depmod -a but this returned an error: WARNING: Couldn't open directory /lib/modules/2.6.24-10-pve: No such file or directory FATAL: Could not open /lib/modules/2.6.24-10-pve/modules.dep.temp for writing: No such file or directory So I read again about creating the directory empty and redoing "depmod -a" it. I now don't get the dependancies error but get this and I don't have a clue how to proceed: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Module ip_tables not found. iptables-restore v1.4.4: iptables-restore: unable to initialize table 'raw' Error occurred at line: 2 Try `iptables-restore -h' or 'iptables-restore --help' for more information. I understand that iptables rules have to be different on the VM machine and perhaps some of the rules we are trying to apply (from our physical server) are not compatible but these are just source IP and destination port checks that I would like to be able to have available . I've heard that on the CentOS template there are no issues with this, so I understand is to do with VM config. Any help would be greatly appreciated.

  Read the article

• Java web app deployment and ControlTier adoption

  - by Ran

  I've been searching for a configuration and deployment manager tool for my java-linux based web service and have been looking mainly at ControlTier (http://controltier.org). We operate at a medium scale (100's of hosts, multi-DC, dozens of services). There seem to be be plenty of lower level system admin tools such as chef, puppet, cfengine, bcfg2 and more and my understanding and the reason I'm calling them "low level" is that they are great for system level administration tasks such as setting up a mount, file permissions, users etc but aren't designed, for example for java deployments, which usually come with a build process and special java semantics. In many cases any tool can be used to do anything but if it was not designed for the task it can get uncomfortable. OTOH control-tier seem to have been designed just for that - java application deployments, at least that's what all the tutorials on their site demonstrate but here's the problem - The wiki at http://controltier.org/wiki/ is pretty good and stuffed with examples and the company behind the open source CT product is very responsive (pushy...) however, I'm yet to have seen any material from 3rd party users on the net. No success stories, no detailed blog posts, no best practices, no cheat sheets, not even hate letters, nothing. This plays badly for DTO solutions, CT's sponsor for two reasons, one is that it makes me suspicious what's the reason for the poor adoption? and second, what do I do if I get stuck and there's no help page on CT's wiki page and the mailing list is too slow to answer. I'm stuck with a "free" product that a consultancy company is pushing. So my question here - I'd be interested in hearing if anyone has had real world experience with CT for java based web app deployments and if he'd thumb up the product? Any other comments that may enlighten me are welcome of course...

  Read the article

• Can't make nodejs mingw32: pkg-config can't find gnutils

  - by valya

  I'm trying to compile nodejs using MSYS, mingw32 on Windows 7-64 Valentin Golev@VALYASNOTEBOOK /home/Valentin_Golev/nodejs $ ./configure Checking for program CL : ok C:\Program Files (x86)\Microsoft V isual Studio 10.0\VC\BIN\x86_amd64\CL.exe Checking for program CL : ok C:\Program Files (x86)\Microsoft V isual Studio 10.0\VC\BIN\CL.exe Checking for program CL : ok C:\Program Files (x86)\Microsoft V isual Studio 10.0\VC\BIN\amd64\CL.exe Checking for program CL : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\CL.exe Checking for program CL : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\CL.exe Checking for program CL : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\x86_amd64\CL.exe Checking for program CL : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\CL.exe Checking for program CL : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\amd64\CL.exe Checking for program CL : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\amd64\CL.exe Checking for program LINK : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\amd64\LINK.exe Checking for program LIB : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\amd64\LIB.exe Checking for program MT : ok C:\Program Files\\Microsoft SDKs\W indows\v6.0A\bin\x64\MT.exe Checking for program RC : ok C:\Program Files\\Microsoft SDKs\W indows\v6.0A\bin\x64\RC.exe Checking for msvc : ok Checking for msvc : ok Checking for library dl : not found Checking for library execinfo : not found Checking for gnutls >= 2.5.0 : fail --- libeio --- Checking for library pthread : not found Checking for function pthread_create : not found error: the configuration failed (see 'C:\\msys\\1.0\\home\\Valentin_Golev\\node js\\build\\config.log') I have gnutils built and installed! I've checked the config.log, and there was a command: pkg-config --errors-to-stdout --print-errors --atleast-version=2.5.0 gnutls I typed it in the console Valentin Golev@VALYASNOTEBOOK /home/Valentin_Golev/nodejs $ pkg-config --errors-to-stdout --print-errors --atleast-version=2.5.0 gnutls Package gnutls was not found in the pkg-config search path. Perhaps you should add the directory containing `gnutls.pc' to the PKG_CONFIG_PATH environment variable No package 'gnutls' found But, Valentin Golev@VALYASNOTEBOOK ~ $ $PKG_CONFIG_PATH sh: c:/msys/1.0/local/lib/pkgconfig: is a directory Valentin Golev@VALYASNOTEBOOK ~ $ cd $PKG_CONFIG_PATH Valentin Golev@VALYASNOTEBOOK /local/lib/pkgconfig $ ls gnutls-extra.pc gnutls.pc What am I doing wrong?

  Read the article

• web application or wep portal

  - by klo

  as title said differences between those 2. I read all the definition and some articles, but I need information about some other aspects. Here is the thing. We want to build a web site that will contain: site, database, uploads, numerous background services that would have to collect information from uploads and from some other sites, parse them etc...I doubt that there are portlets that fits our specific need so we will have to make them our self. So, questions: 1. Deployment ( and difference in cost if possible), is deploying portals much more easier then web app ( java or .net) 2. Server load. Does portal consume much of server power ( and can you strip portal of thing that you do not use) 3. Implementation and developing of portlets. Can u make all the things that you could have done in java or .net? 4. General thoughts of when to use portals and when classic web app. Tnx all in advence...

  Read the article

• Suggestions on the best home server rack cabinet

  - by allentown

  I have a lot of gear in a colocation facility right now. Some of it is going to come home with me now. I do not know anything about the "rack mount" side of the industry. I lease a rack, and I put my stuff in it. I have a few 1U boxes, a few 2U boxes, and a few 4U boxes. 1U switch. One is a new Xserve, which means it is deep. I think I can get by with around 12U to 18U. I want to keep it as small as possible, since I do not have a lot of spare space at my home. I will not be able to bolt to the wall, floor etc, so it should not be tall. This is something I would love to more or less just be a box that sits on the floor but gives me the ability to mount nicely, do nice cable management etc. Are the "post" style racks junk? I am liking the open space, and the no limitations on depth of something like this: http://www.rackmountsolutions.net/images/products/Martin-relay-rack.jpg However, that thing is way too tall, and probably way too expensive. I am looking to be around $300.00 or less. More if I have to, though I would prefer not to. These look near perfect: (See comment for this link, the system will not let me post a second url) but I am worried the Xserve will not fit in it. If anyone has any good links, or website recommendations of good past experience, I would appreciate it. I am almost considering that I may be able to build something with random scraps of stuff at Home Depot as well.

  Read the article

• Update Grub on Squeeze - Kernel downgrade due VMware Server

  - by vodoo_boot

  Hi! I happen to run into various problems regarding grub and kernels. I don't really care about the kernel internas. All I want is VMware server in that dedicated root-server. 1.) What is a bzImage vs. vmlinuz? kaze:~# ls /boot/ System.map-2.6.32-5-amd64 bzImage-2.6.33.2 config-2.6.33.2 initrd.img-2.6.32-5-amd64 System.map-2.6.33.2 bzImage-2.6.35.6 config-2.6.35.6 vmlinuz-2.6.32-5-amd64 System.map-2.6.35.6 config-2.6.32-5-amd64 grub I updated my menu.lst (grub2): timeout 5 default 0 fallback 1 title 2.6.32.5 kernel (hd0,1)/boot/vmlinuz-2.6.32-5-amd64 root=/dev/sda2 panic=60 noapic acpi=off title 2.6.35.6 kernel (hd0,1)/boot//bzImage-2.6.35.6 root=/dev/sda2 panic=60 noapic acpi=off title 2.6.32.3 kernel (hd0,1)/boot//bzImage-2.6.33.2 root=/dev/sda2 panic=60 noapic acpi=off That doesn't do well... I think the vmlinuz file is missing initrd or so. Dunno. In fact I don't give too much about kernel boot voodoo as long as it works. update-grub(2) does not work. Does anybody know what magical trick there is to get the 2.6.32-5 booting? 2.) I thought t follow the Deban wiki.. I cannot get header-files for the installed 35.6 or 33.2 kernel in the repositories. I cannot build foreign headers because they will not match the running kernel. So how does one deal with that situtation? I'd prefer not to have to downgrade the kernel. Thanks for any answers!

  Read the article

• Easy_install the wrong version of python modules (Mac OS)

  - by user73250

  I installed Python 2.7 on my Mac. When typing "python" in terminal, it shows: $ python Python 2.7 (r27:82508, Jul 3 2010, 20:17:05) [GCC 4.0.1 (Apple Inc. build 5493)] on darwin Type "help", "copyright", "credits" or "license" for more information. The Python version is correct here. But when I try to easy_install some modules. The system will install the modules with python version 2.6 which are not able be imported to Python 2.7. And of course I can not do the functions I need in my code. Here's an example of easy_install graphy: $ easy_install graphy Searching for graphy Reading pypi.python.org/simple/graphy/ Reading http://code.Google.com/p/graphy/ Best match: Graphy 1.0.0 Downloading http://pypi.python.org/packages/source/G/Graphy/Graphy- 1.0.0.tar.gz#md5=390b4f9194d81d0590abac90c8b717e0 Processing Graphy-1.0.0.tar.gz Running Graphy-1.0.0/setup.py -q bdist_egg --dist-dir /var/folders/fH/fHwdy4WtHZOBytkg1nOv9E+++TI/-Tmp-/easy_install-cFL53r/Graphy-1.0.0/egg-dist-tmp-YtDCZU warning: no files found matching '*.tmpl' under directory 'graphy' warning: no files found matching '*.txt' under directory 'graphy' warning: no files found matching '*.h' under directory 'graphy' warning: no previously-included files matching '*.pyc' found under directory '.' warning: no previously-included files matching '*~' found under directory '.' warning: no previously-included files matching '*.aux' found under directory '.' zip_safe flag not set; analyzing archive contents... graphy.all_tests: module references __file__ Adding Graphy 1.0.0 to easy-install.pth file Installed /Library/Python/2.6/site-packages/Graphy-1.0.0-py2.6.egg Processing dependencies for graphy Finished processing dependencies for graphy So it installs graphy for Python 2.6. Can someone help me with it? I just want to set my default easy_install Python version to 2.7.

  Read the article

• How do I install git/git-svn on RHEL5 with a custom perl install?

  - by kbosak

  I've had nothing but trouble trying to install Git on RHEL5. First I tried from source, but ran into several issues with installing the docs. There appeared to be missing libs and such for parsing xml that I couldn't figure out how to get installed and recognized. Then I tried using the EPEL yum repository and was able to install git and its docs but now git-svn is not working. It complains about not finding the perl modules Git.pm and SVN/Core.pm. When I set the GITPERLLIB environment variable to the location of those libs it seg faults. Some background: RHEL5 came with perl 5.8.8, but we wanted to use 5.10 so I installed that from source (to a custom location). Someone then symlinked the system perl binary to this newer version of Perl to make sure nobody uses the wrong version. Each developer also has their own build of Perl. So I'm wondering what's the best way to install Git on this system and have both the docs and git-svn working correctly for each user. Unfortunately I'm a developer and not as good with system administration so take it easy on me.

  Read the article

• JSP Content Issue in Tomcat

  - by gautam vegeta

  There is one application where I work where there are still manual builds used i.e manually moving the servlet classes and jsp files from Dev to QA and finally to Prod. This is the method used in this application which cant be changed for some wierd reasons.BTW this is not the problem. We did a manual build where we transferred jsp files from QA to PROD recently. And we noticed that the jsp file content does not correspond to the updated jsp's but have the same content to the jsp file which was present in the server prior to the deployment. We did not re-start tomcat since jsp files upon updation automatically changes its contents. This problem persisted even after 6 hours of deployment If we consider the time standards which are different which may cause some delay. So to fix this we had to individually go into every jsp file and just type something save it and delete this change and save it.Then it worked perfectly. But finally the jsp file content before and after was never changed we just did this to change the modification date. If we think in terms of timestamp problem how can this be possible coz the old jsp files which were present in the server prior to deployment was atlest one month old and the ones getting deployed were defenitely newer than that. Why did this happen? This did not happen when we did same type of deployments earlier. How can we prevent this from happening in the future.

  Read the article

• Fully FOSS EMail solution

  - by Ravi

  I am looking at various FOSS options to build a robust EMail solution for a government funded university. Commercial options are to be chosen only in the worst case scenario. Here are the requirements: Approx 1000-1500 users - Postfix or Exim? (Sendmail is out;-)) Mailing lists for different groups/Need web based archive - Mailman? Sympa? Centralised identity store - OpenLDAP? Fedora 389DS? Secure IMAP only - no POP3 required - Courier? Dovecot? Cyrus?? Anti Spam - SpamAssasin? what else? Calendaring - ?? webmail - good to have, not mandatory - needs to be very secure...so squirrelmail is out;-)? Other questions: What mailbox storage format to use? where to store? database/file system? Simple and effective HA options? Is there a web proxy equivalent to squid in the mail server world? software load balancers?CARP? Monitoring and alert? Backup? The govt wants to stimulate the local economy by buying hardware locally from whitebox vendors. Also local consultants and university students will do the integration. We looked at out-of-the-box integrated solutions like Axigen, Zimbra and GMail but each was ruled out in favour of a DIY approach in the hopes of full control over the data and avoiding vendor lockin - which i though was a smart thing to do. I wish more provincial governments in the developing world think of these sort of initiatives As for OS - Debian, FreeBSD would be first preference. Commercial OS's need not apply. CentOS as second tier option...

  Read the article

• flowchart for debugging a slow/unresponsive server

  - by davidosomething

  So the server is slow: Roll back to the previous known working build - Success? Code problem - Fail? Go on. Ping ip address - Success? maybe a DNS problem, go on. - Fail? Server or connection problem, go on. Ping and tracert your domain.com from inside your network - previous success - fail: DNS problem - success? go on. - previous fail and: - Fail? Go on, could be you or network. - Success? Go on. Try it from outside your network (http://centralops.net/co/) - Fail? The server's network connection sucks. - Success? If inside network was fail, your network sucks. Check the server load: CPU/RAM usage. Is it overloaded? - Yes. Who's the culprit? Kill some processes/reboot. - No? Go on. what other steps should i add?

  Read the article

• FreeBSD ZFS RAID-Z2 performance issues

  - by Axel Gneiting

  I'm trying to build my own network attached storage based on FreeBSD+ZFS+standard components, but there are strange performance issues. The hardware specs are: AMD Athlon II X2 240e processor ASUS M4A78LT-M LE mainboard 2GiB Kingston ECC DDR3 (two sticks) Intel Pro/1000 CT PCIe network adapter 5x Western Digital Caviar Green 1.5TB I created a RAID-Z2 zpool from all disks. I installed FreeBSD 8.1 on that zpool following the tutorial. The SATA controllers are running in AHCI mode. Output of zpool status: pool: zroot state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 raidz2 ONLINE 0 0 0 gptid/7ef815fc-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/80344432-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/81741ad9-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/824af5cb-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/82f98a65-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 The problem is that write performance on the pool is very very bad (<10 MB/s) and every application that is accessing the disk is unresponsive every few seconds when writing. It seems like writing is fine until the ZFS ark cache is full and then ZFS stalls the entire system I/O till it's finished writing that data. Also I'm getting kmem_malloc to small kernel panics. I've already tried to put vm.kmem_size="1500M" vm.kmem_size_max="1500M" into /boot/loader.conf, but it doesn't help. Does anyone know what's going on here? Am I really not having enough memory for ZFS to handle this RAID-Z2?

  Read the article

< Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >