Search Results

Search found 24106 results on 965 pages for 'usb key'.

Page 538/965 | < Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >

• How do I install windows wireless driver for TP-Link TL-WN7200ND

  - by Jim

  I'm using the TP-Link TL-WN7200ND USB wireless adapter. I have downloaded the Windows drivers and updated Ubuntu to 10.10 by manually connecting the computer to the router. I also installed ndiswrapper-gtk. I get a Windows Wireless Drivers in my Administration menu, and I was able to get it to read the Windows 7 .inf file. The .inf for XP does not work. It adds it and the driver appears in the list with "Hardware: present". I set up the wireless connection information (ESSID and WPA2-Personal key). Problem: I don't see the network manager icon in the top right of the screen. I managed to manually start it manually using sudo services network-manager restart but it shows no connections in the menu, saying that there's nothing to manage. In my /etc/network/interfaces file I have an entry for the loopback and the standard two-liner for eth0 with dhcp. From memory, something like: iface eth0 auto eth0 dhcp I had read somewhere that 10.10 would have standard support for my wireless adapter (TL-WN7200ND) but that seems not to be the case. However, I don't ever remember having the network-manager icon in the top-right and it does not auto-start at the moment. This was originally an Ubuntu 9.10 install that I've upgraded over time. I also used to use pppoeconf to connect to the net, which might affect the /etc/network/interfaces file?

  Read the article

• Focus follows mouse stops working when opening window from launcher and no click to focus

  - by user97600

  This is 12.04 default desktop (unity). I set it to focus follows mouse, and changed the menus to be on the window. This worked for a while, then some unknown even, maybe an upgrade maybe some other setting change caused it to stop working. There are many ways for this behavior to start but one reliable one is to bring a window to the foreground/focus with the launcher. Now the focus is stuck on that window and not just the window but the regions within the window so the close, maximize, minimize and menus do not work. I have to use mouse middle and then mouse right and then focus follows mouse is restored for a bit. The exact details of the mouse action aren't clear, sometimes it seems like just mouse middle helps, sometimes just right some times a desperate sequence of clicks :-( I have tried switching to the gnome desktop and it seems to occur less there but it is not eliminated. I have tried switching mice to an old wired USB mouse. I have tried creating a new account and that has not worked. I have observed "split focus" where to scroll button scrolls one one window but the input goes to another. I go trapped recently where my keyboard input went to libre office calc, but I was selecting the search term in the chrome address window. The selection "grayed" but the keyboard input for the search went to libre. Regions in windows have very confused focus. I have to work hard to get focus on for example the close gliph (X) or the minimize gliph (_).

  Read the article

• firefox raided?

  - by dschinn1001

  ubuntu 12.10 with firefox 17.0 firefox is now suddenly not starting any more ? (since I tried something with virtualbox and win7 firefox seems to be raided somehow ? - then after next boot virtualbox with win7 did not work any more and had message like here: Premature end of data in tag VirtualBox line 8. Location: '/home/$user/VirtualBox VMs/V12/V12.vbox', line 86 (8), column 2. /home/vbox/vbox-4.2.4/src/VBox/Main/src-server/MachineImpl.cpp[724] (nsresult Machine::registeredInit()). Fehlercode: NS_ERROR_FAILURE (0x80004005) Komponente: Machine Interface: IMachine {22781af3-1c96-4126-9edf-67a020e0e858} ) this happened all - after win7 made an update and virtual hard-disk with size of normally 25 Gibi exceeded to 26.8 Gibi I plugged (when I created virtualbox with win7) usb-hard-disk with 500 Gibi, but somehow win7 was not installed on disk with 500 Gibi - instead only virtual-harddisk with default 25 Gibi was created - and smaller harddisk with maximum of 120 Gibi was restless stuffed out. This created then the problem with "raided" firefox and firefox cannot start any more. After I delelted virtualbox with win7 - there are 12 Gibi free space back on the smaller harddisk - but firefox remains after reboot out-of-function and does not start.

  Read the article

• Graphic Card Installation Failure (NV 9600M GT)

  - by Georg

  I wanted to switch from 7 to Ubuntu. Now, the first thing that holds me back is the installation of the driver for my Nvidia 9600M GT. Ubuntu recommends me 4 drivers from the "Additional Driver" Section. Now, whatever driver I install, there are four things happening RANDOMLY after rebooting: The pc freezes before seeing bootup splash The pc freezes while seeing bootup splash image (ubuntu logo with the 5 dots) The pc gets into login screen and freezes instantly (Thought the unity-bar is transparent now) The pc freezes right after beeing able to login. (While this is happening the unity-bar changes from transparent to ugly-flat-style) I also tried to install the official Nvidia .run file but after exiting the X-Server, it says the driver is not compatible with the kernel and exits installation. Can somebody help me? I really wanna get rid of Windows :( But Ubuntu drives me perfectly insane. Please answer as noobish as possible. I'm an expert Windows user, but Linux is absolutely new to me. My Specs: Ubuntu 11.10 installed from USB Stick (like 100 times now :/ because I dont know how to remove the driver in recovery mode) 9600M GT 4GB Ram Intel Centrino 2 Dual Core 2.26GHz Win 7 and Ubuntu running along side. Thank you in advance, regards.

  Read the article

• ubuntu 12.10 installation failure

  - by Eidelmaim

  Here i am asking this question again because someone deemed it a duplicate to another topic which i over looked and NOTHING AT ALL in that topic pertained to my problem. If your going to close a topic believing it is a duplicate at least do somke reasearch into WHY you think its a duplicate and provide a like to a better source. How do i get past this installation username and password issue? I downloaded ubuntu 12.10 directly from Ubuntu.com and created a bootable USB with linuxlive. after loading the boot drive and ubuntu begins, it goes directly from the purple ubuntu startup screen directly to a black DOS like prompt asking for a ubuntu login. this is COMPLETLY before any installation -begins. i need some help with this. FYI : this is what it is saying after it goes to the login area in the DOS (Full black screen) like screen. Ubuntu 12.10 ubuntu tty1 ubuntu login: now i will provide a few images of the problem i am having. and because i DONT HAVE ANY OS on the computer BECAUSE ubuntu WONT go PAST this... i have to snap these pictuires with a cell phone and upload on another PC. these links are in chronological order from time of pressing power button to time i am presented with log in screen : image 1 image 2 can only post 2 links in messages... will post additional links in comments So, again... how do i get past this ? this is entireley before ubuntu is installed on my system. my PC specs... Homebuilt computer: Motherboard is a Asus Sabertooth x58 with a intel core i7 processor. Mushkin memory @ 12gbs. 4ea. Seagate 150gb hard drives. nvidia GTX 260 graphics card. i initially attempted to install to raid 5. failed. i broke down the raid and attempted to install to a single drive with all other drives disconnected from the PC. again, thanks in advanced for any assistance.

  Read the article

• Generate a merge statement from table structure

  - by Nigel Rivett

  This code generates a merge statement joining on he natural key and checking all other columns to see if they have changed. The full version deals with type 2 processing and an audit trail but this version is useful. Just the insert or update part is handy too. Change the table at the top (spt_values in master in the version) and the join columns for the merge in @nk. The output generated is at the top and the code to run to generate it below. Output merge spt_values a using spt_values b on a.name = b.name and a.number = b.number and a.type = b.type when matched and (1=0 or (a.low b.low) or (a.low is null and b.low is not null) or (a.low is not null and b.low is null) or (a.high b.high) or (a.high is null and b.high is not null) or (a.high is not null and b.high is null) or (a.status b.status) or (a.status is null and b.status is not null) or (a.status is not null and b.status is null) ) then update set low = b.low , high = b.high , status = b.status when not matched by target then insert ( name , number , type , low , high , status ) values ( b.name , b.number , b.type , b.low , b.high , b.status ); Generator set nocount on declare @t varchar(128) = 'spt_values' declare @i int = 0 -- this is the natural key on the table used for the merge statement join declare @nk table (ColName varchar(128)) insert @nk select 'Number' insert @nk select 'Name' insert @nk select 'Type' declare @cols table (seq int, nkseq int, type int, colname varchar(128)) ;with cte as ( select ordinal_position, type = case when columnproperty(object_id(@t), COLUMN_NAME,'IsIdentity') = 1 then 3 when nk.ColName is not null then 1 else 0 end, COLUMN_NAME from information_schema.columns c left join @nk nk on c.column_name = nk.ColName where table_name = @t ) insert @cols (seq, nkseq, type, colname) select ordinal_position, row_number() over (partition by type order by ordinal_position) , type, COLUMN_NAME from cte declare @result table (i int, j int, k int, data varchar(500)) select @i = @i + 1 insert @result (i, data) select @i, 'merge ' + @t + ' a' select @i = @i + 1 insert @result (i, data) select @i, ' using cte b' select @i = @i + 1 insert @result (i, j, data) select @i, nkseq, ' ' + case when nkseq = 1 then 'on' else 'and' end + ' a.' + ColName + ' = b.' + ColName from @cols where type = 1 select @i = @i + 1 insert @result (i, data) select @i, ' when matched and (1=0' select @i = @i + 1 insert @result (i, j, k, data) select @i, seq, 1, ' or (a.' + ColName + ' b.' + ColName + ')' + ' or (a.' + ColName + ' is null and b.' + ColName + ' is not null)' + ' or (a.' + ColName + ' is not null and b.' + ColName + ' is null)' from @cols where type 1 select @i = @i + 1 insert @result (i, data) select @i, ' )' select @i = @i + 1 insert @result (i, data) select @i, ' then update set' select @i = @i + 1 insert @result (i, j, data) select @i, nkseq, ' ' + case when nkseq = 1 then ' ' else ', ' end + colname + ' = b.' + colname from @cols where type = 0 select @i = @i + 1 insert @result (i, data) select @i, ' when not matched by target then insert' select @i = @i + 1 insert @result (i, data) select @i, ' (' select @i = @i + 1 insert @result (i, j, data) select @i, seq, ' ' + case when seq = 1 then ' ' else ', ' end + colname from @cols where type 3 select @i = @i + 1 insert @result (i, data) select @i, ' )' select @i = @i + 1 insert @result (i, data) select @i, ' values' select @i = @i + 1 insert @result (i, data) select @i, ' (' select @i = @i + 1 insert @result (i, j, data) select @i, seq, ' ' + case when seq = 1 then ' ' else ', ' end + 'b.' + colname from @cols where type 3 select @i = @i + 1 insert @result (i, data) select @i, ' );' select data from @result order by i,j,k,data

  Read the article

• OTN ArchBeat Top 10 for September 2012

  - by Bob Rhubart

  The results are in... Listed below are the Top 10 most popular items shared via the OTN ArchBeat Facebook Page for the month of September 2012. The Real Architects of Los Angeles - OTN Architect Day - Oct 25 No gossip. No drama. No hair pulling. Just a full day of technical sessions and peer interaction focused on using Oracle technologies in today's cloud and SOA architectures. The event is free, but seating is limited, so register now. Thursday October 25, 2012. 8:00 a.m. – 5:00 p.m. Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048. Oracle Fusion Middleware Security: Attaching OWSM policies to JRF-based web services clients "OWSM (Oracle Web Services Manager) is Oracle's recommended method for securing SOAP web services," says Oracle Fusion Middleware A-Team member Andre Correa. "It provides agents that encapsulate the necessary logic to interact with the underlying software stack on both service and client sides. Such agents have their behavior driven by policies. OWSM ships with a bunch of policies that are adequate to most common real world scenarios." His detailed post shows how to make it happen. Oracle 11gR2 RAC on Software Defined Network (SDN) (OpenvSwitch, Floodlight, Beacon) | Gilbert Stan "The SDN [software defined network] idea is to separate the control plane and the data plane in networking and to virtualize networking the same way we have virtualized servers," explains Gil Standen. "This is an idea whose time has come because VMs and vmotion have created all kinds of problems with how to tell networking equipment that a VM has moved and to preserve connectivity to VPN end points, preserve IP, etc." H/T to Oracle ACE Director Tim Hall for the recommendation. Process Oracle OER Events using a simple Web Service | Bob Webster Bob Webster's post "provides an example of a simple web service that processes Oracle Enterprise Repository (OER) Events. The service receives events from OER and utilizes the OER REX API to implement simple OER automations for selected event types." Understanding Oracle BI 11g Security vs Legacy Oracle BI 10g | Christian Screen "After conducting a large amount of Oracle BI 10g to Oracle BI 11g upgrades and after writing the Oracle BI 11g book,"says Oracle ACE Christian Screen, "I still continually get asked one of the most basic questions regarding security in Oracle BI 11g; How does it compare to Oracle BI 10g? The trail of questions typically goes on to what are the differences? And, how do we leverage our current Oracle BI 10g security table schema in Oracle BI 11g?" OIM-OAM-OAAM integration using TAP – Request Flow you must understand!! | Atul Kumar Atul Kumar's post addresses "key points and request flow that you must understand" when integrating three Oracle Identity Management product Oracle Identity Management, Oracle Access Management, and Oracle Adaptive Access Manager. Adding a runtime LOV for a taskflow parameter in WebCenter | Yannick Ongena Oracle ACE Yannick Ongena illustrates how to customize the parameters tab for a taskflow in WebCenter. Tips on Migrating from AquaLogic .NET Accelerator to WebCenter WSRP Producer for .NET | Scott Nelson "It has been a very winding path and this blog entry is intended to share both the lessons learned and relevant approaches that led to those learnings," says Scott Nelson. "Like most journeys of discovery, it was not a direct path, and there are notes to let you know when it is practical to skip a section if you are in a hurry to get from here to there." 15 Lessons from 15 Years as a Software Architect | Ingo Rammer In this presentation from the GOTO Conference in Copenhagen, Ingo Rammer shares 15 tips regarding people, complexity and technology that he learned doing software architecture for 15 years. WebCenter Content (WCC) Trace Sections | ECM Architect ECM Architect Kevin Smith shares a detailed technical post covering WebCenter Content (WCC) Trace Sections. Thought for the Day "Eventually everything connects - people, ideas, objects. The quality of the connections is the key to quality per se." — Charles Eames (June 17, 1907 – August 21, 1978) Source: SoftwareQuotes.com

  Read the article

• Steam (via Wine) crashes after login - any troubleshooting tips?

  - by new Thrall

  The Steam client crashes after I login. After submitting my credentials, Steam displays a dialog box informing me the client is 'connecting'. I then see the Steam main page and news page displayed for roughly a second or so before the client crashes. I'm running Ubuntu 10.10 (I think..what's the best way to verify? uname only displays Linux) which I've installed on a usb flash drive using a capser-rw file for persistence. wine-1.3.14 I'm not sure how to troubleshoot. How do I identify if the problem is with wine or steam or the video card driver, or what? Any ideas? hardware: motherboard: ECS Elitegroup 945GCT-M sound: integrated audio video: ATI Radeon X1950 console output: ubuntu@ubuntu:~/.wine/drive_c/Program Files/Steam$ wine Steam.exe fixme:process:GetLogicalProcessorInformation ((nil),0x32e488): stub fixme:process:GetLogicalProcessorInformation (0x1010c00,0x32e488): stub fixme:process:SetProcessShutdownParameters (00000100, 00000000): partial stub. fixme:urlmon:CoInternetSetFeatureEnabled 5, 0x00000002, 1, stub fixme:urlmon:CoInternetSetFeatureEnabled 10, 0x00000002, 1, stub fixme:dwmapi:DwmSetWindowAttribute (0x1009a, 2, 0x32d334, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x1009a, 3, 0x32d338, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x1009a, 4, 0x32d33c, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100a2, 2, 0x32d964, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100a2, 3, 0x32d968, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100a2, 4, 0x32d96c, 4) stub err:ole:CoGetClassObject class {77f10cf0-3db5-4966-b520-b7c54fd35ed6} not registered err:ole:CoGetClassObject no class object {77f10cf0-3db5-4966-b520-b7c54fd35ed6} could be created for context 0x1 fixme:wbemprox:wbem_locator_ConnectServer 0x1ab5f0, L"ROOT\CIMV2", (null), (null), (null), 0x00000080, (null), (nil), 0x42bbee8) fixme:dwmapi:DwmSetWindowAttribute (0x100ae, 2, 0x32d8cc, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100ae, 3, 0x32d8d0, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100ae, 4, 0x32d8d4, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100b6, 2, 0x32d80c, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100b6, 3, 0x32d810, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100b6, 4, 0x32d814, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100c0, 2, 0x32d2e4, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100c0, 3, 0x32d2e8, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100c0, 4, 0x32d2ec, 4) stub fixme:winhttp:WinHttpGetIEProxyConfigForCurrentUser returning no proxy used fixme:dwmapi:DwmSetWindowAttribute (0x100dc, 2, 0x32d94c, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100dc, 3, 0x32d950, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100dc, 4, 0x32d954, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10118, 2, 0x32da8c, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10118, 3, 0x32da90, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10118, 4, 0x32da94, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10122, 2, 0x32d514, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10122, 3, 0x32d518, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10122, 4, 0x32d51c, 4) stub fixme:dbghelp:elf_search_auxv can't find symbol in module

  Read the article

• How to Set Ubuntu 12.04 to it's factory settings like when u first installed it?

  - by Cameron

  Well, this is a simple answered question, from the title, but my real problem is hard af. I have set ubuntu to use root, then it wouldn't let me log into the admin account only root and guest I deleted the admin account, remade another, then attempted to disable root account. This failed - I messed up the password, the original password was "root" I also didn't set a password for my new admin account, so It says it has one, whats the default password for it? I can't moderate my ubuntu system at all now. I have tried to drop to cmd shell thing, it asks for the root password, i type 'root' and any other possible passwords, it doesn't work. To reset ubuntu to factory settings i have found that i could enter the following code: sudo dpkg-reconfigure -phigh -a sudo Requires admin password, that I cant find out without root password and I don;t know. My goal is to try to fix this without remaking a bootable usb for ubuntu, because I lost the one i made for this. so If i can't, please say so. If you can help thanks!

  Read the article

• No NFC for the iPhone, and here's why

  - by David Dorf

  I, like many others in the retail industry, was hoping the iPhone 5 would include an NFC chip that enabled a mobile wallet.  In previous postings I've discussed the possible business case and the foreshadowing of Passbook, but it wasn't meant to be.  A few weeks ago I was considering all the rumors, and it suddenly occurred to me that it wasn't in Apple's best interest to support an NFC chip.  Yes they have patents in this area, but perhaps they are more defensive than indicating new development. Steve Jobs wanted to always win, but more importantly he didn't want others to win at his expense.  It drove him nuts that Windows was more successful than MacOS, and clearly he was bothered by Samsung and other handset manufacturers copying the iPhone.  But he was most angry at Google for their stewardship of Android. If the iPhone 5 had an NFC chip, who would benefit most?  Google Wallet is far and away the leader in NFC-based payments via mobile phones in the US.  Even without Steve at the helm, Apple isn't going to do anything to help Google.  Plus Apple doesn't like to do things in an open way -- then they lose control.  For example, you don't see iPhones with expandable memory, replaceable batteries, or USB connectors.  Adding a standards-based NFC chip just isn't in their nature. So I don't think Apple is holding back on the NFC chip for the 5S or 6.  It just isn't going to happen unless they can figure out how to prevent others from benefiting from it. All the other handset manufacturers will use NFC as a differentiator, which may be enough to keep Google and Isis afloat, and of course Square and PayPal aren't betting on NFC anyway.  This isn't the end of alternative payments, its just a major speed bump.

  Read the article

• Connecting a Samsung Galaxy S3 in Ubuntu 13.04

  - by Squishy

  In 13.04, whenever I connect an Android device, one of three things happens: 1 . It mounts successfully (maybe once out of 3 attempts) 2 . It fails to mount with the following error message: Oops! Something went wrong. Unhandled error message: Unable to open MTP device 3 . This one occasionally happens: Unhandled error message: No such interface `org.gtk.vfs.Mount' on object at path /org/gtk/vfs/mount/1 Regardless of activity (even when successfully mounted) it will continuously spam the following error message: Unable to mount SAMSUNG_Android Unable to open MTP Device '[usb:003,00x]' where x seems to be an arbitrary number below 10 and continues counting up with each new error message until the device is unplugged. I've also just noticed that even if it mounts successfully, it unmounts after about 30 seconds and starts spamming the error message above. The Android device is unlocked, always on and fully charged. ADB seems to function normally. Any suggestions? Further info: this happens on both a stock Samsung S3 and an Xperia Arc S running a custom AOSP based ROM. I've also tried the steps outlined in this Stack Overflow answer, but the problem persists. UPDATE: After doing a dist-upgrade (May 8th 2013), the Xperia Arc S on AOSP ROM now mounts and behaves normally. The S3, however, still behaves as described above. UPDATE: After careful observation, ABD does not, in fact, behave normally. If the error message above appears while sending an app to the device, the attempt is aborted with an error message saying that the device is unavailable.

  Read the article

• JCP Awards 10 Year Retrospective

  - by Heather VanCura

  As we celebrate 10 years of JCP Program Award recognition in 2012,  take a look back in the Retrospective article covering the history of the JCP awards.  Most recently, the JCP awards were  celebrated at JavaOne Latin America in Brazil, where SouJava was presented the JCP Member of the Year Award for 2012 (won jointly with the London Java Community) for their contributions and launch of the Global Adopt-a-JSR Program. This is also a good time to honor the JCP Award Nominees and Winners who have been designated as Star Spec Leads.  Spec Leads are key to the Java Community Process (JCP) program. Without them, none of the Java Specification Requests (JSRs) would have begun, much less completed and become implemented in shipping products.  Nominations for 2012 Start Spec Leads are now open until 31 December. The Star Spec Lead program recognizes Spec Leads who have repeatedly proven their merit by producing high quality specifications, establishing best practices, and mentoring others. The point of such honor is to endorse the good work that they do, showcase their methods for other Spec Leads to emulate, and motivate other JCP program members and participants to get involved in the JCP program. Ed Burns – A Star Spec Lead for 2009, Ed first got involved with the JCP program when he became co-Spec Lead of JSR 127, JavaServer Faces (JSF), a role he has continued through JSF 1.2 and now JSF 2.0, which is JSR 314. Linda DeMichiel – Linda thus involved in the JCP program from its very early days. She has been the Spec Lead on at least three JSRs and an EC member for another three. She holds a Ph.D. in Computer Science from Stanford University. Gavin King – Nominated as a JCP Outstanding Spec Lead for 2010, for his work with JSR 299. His endorsement said, “He was not only able to work through disputes and objections to the evolving programming model, but he resolved them into solutions that were more technically sound, and which gained support of its pundits.” Mike Milikich –  Nominated for his work on Java Micro Edition (ME) standards, implementations, tools, and Technology Compatibility Kits (TCKs), Mike was a 2009 Star Spec Lead for JSR 271, Mobile Information Device Profile 3. David Nuescheler – Serving as the CTO for Day Software, acquired by Adobe Systems, David has been a key player in the growth of the company’s global content management solution. In 2002, he became Spec Lead for JSR 170, Content Repository for Java Technology API, continuing for the subsequent version, JSR 283. Bill Shannon – A well-respected name in the Java community, Bill came to Oracle from Sun as a Distinguished Engineer and is still performing at full speed as Spec Lead for JSR 342, Java EE 7,  as an alternate EC member, and hands-on problem solver for the Java community as a whole. Jim Van Peursem – Jim holds a PhD in Computer Engineering. He was part of the Motorola team that worked with Sun labs on the Spotless VM that became the KVM. From within Motorola, Jim has been responsible for many aspects of Java technology deployment, from an independent Connected Limited Device Configuration (CLDC) and Mobile Information Device Profile (MIDP) implementations, to handset development, to working with the industry in defining many related standards. Participation in the JCP Program goes well beyond technical proficiency. The JCP Awards Program is an attempt to say “Thank You” to all of the JCP members, Expert Group Members, Spec Leads, and EC members who give their time to contribute to the evolution of Java technology.

  Read the article

• Bluetooth headset A2DP works, HSP/HFP not (no sound/no mic)

  - by Stefan Armbruster

  My Philips SBH9001 headset pairs fine using Ubuntu 12.04. In the audio settings it's properly detected as A2DP device and as HSP/HFP device. Hardware: Thinkpad X230, Ubuntu 12.04 64bit, Kernel 3.6.0-030600rc3-generic (build from Ubuntu mainline repo), Bluetooth device is USB-Id 0a5c:21e6 from Broadcom, Headset is a Philips SBH9001. Note: Kernel 3.6 rc3 is used because of a fix for audio on the dockingstation that is not in any previous branches. Playing audio in A2DP works just fine out of the box, but when switching the headset to HSP/HSP mode there is no sound nor does the microphone work. When connecting the headset, /var/log/syslog shows: Aug 25 21:32:47 x230 bluetoothd[735]: Badly formated or unrecognized command: AT+CSRSF=1,1,1,1,1,7 Aug 25 21:32:49 x230 rtkit-daemon[1879]: Successfully made thread 17091 of process 14713 (n/a) owned by '1000' RT at priority 5. Aug 25 21:32:49 x230 rtkit-daemon[1879]: Supervising 4 threads of 1 processes of 1 users. Aug 25 21:32:50 x230 kernel: [ 4860.627585] input: 00:1E:7C:01:73:E1 as /devices/virtual/input/input17 When switching from A2DP (standard profile) to HSP/HFP: Aug 25 21:34:36 x230 bluetoothd[735]: /org/bluez/735/hci0/dev_00_1E_7C_01_73_E1/fd3: fd(34) ready Aug 25 21:34:36 x230 rtkit-daemon[1879]: Successfully made thread 17309 of process 14713 (n/a) owned by '1000' RT at priority 5. Aug 25 21:34:36 x230 rtkit-daemon[1879]: Supervising 4 threads of 1 processes of 1 users. Aug 25 21:34:41 x230 bluetoothd[735]: Audio connection got disconnected Any hints how to get HSP/HFP working here?

  Read the article

• I can't install Ubuntu on my Dell Inspiron 15R at all

  - by Kieran Rimmer

  I'm attempting to install Ubuntu 12.04LTS, 64 bit onto a Dell Inspiron 15R laptop. I've shrunk down one of the windows partitions and even used gparted to format the vacant space as ext4. However, the install disk simply does not present any options when it comes to the partitioning step. What I get is a non-responsive blank table As well as the above, I've changed the BIOS settings so that USB emulation is disabled (as per Can't install on Dell Inspiron 15R), and changed the SATA Operation setting to all three possible options. Anyway, the install CD will bring up the trial version of ubuntu, and if I open terminal and type sudo fdisk -l, I get this: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xb4fd9215 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility Partition 1 does not start on physical sector boundary. /dev/sda2 * 81920 29044735 14481408 7 HPFS/NTFS/exFAT /dev/sda3 29044736 1005142015 488048640 7 HPFS/NTFS/exFAT /dev/sda4 1005154920 1953520064 474182572+ 83 Linux Disk /dev/sdb: 32.0 GB, 32017047552 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb4fd923d Device Boot Start End Blocks Id System /dev/sdb1 2048 16775167 8386560 84 OS/2 hidden C: drive If I type 'sudo parted -l', I get: Model: ATA WDC WD10JPVT-75A (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 41.1MB 41.1MB primary fat16 diag 2 41.9MB 14.9GB 14.8GB primary ntfs boot 3 14.9GB 515GB 500GB primary ntfs 4 515GB 1000GB 486GB primary ext4 Model: ATA SAMSUNG SSD PM83 (scsi) Disk /dev/sdb: 32.0GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 8589MB 8588MB primary Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! I've also tried a Kubuntu 12.04 and Linuxmint install disks, wityh the same problem. I'm completely lost here. Cheers, Kieran

  Read the article

• Windows Phone 7 Silverlight / XNA development talk

  - by subodhnpushpak

  Hi, I presented on Windows Phone 7 app development using Silverlight. Here are few pics from the event Windows Phone 7 development VIEW SLIDE SHOW DOWNLOAD ALL     I demonstrated the Visual studio, emulator capabilities/ features. An demo on Wp7 app communication with an OData Service, along with a demo on XNA app. There was lot of curious questions; I am listing them here because these keep on popping up again and again: 1. What tools does it takes to develop Wp7 app? Are they free? A typical WP7 app can be developed either using Silverlight or XNA. For developers, Visual Studio 2010 is a good choice as it provides an integrated development environment with lots of useful project templates; which makes the task really easy. For designers, Blend may be used to develop the UI in XAML. Both the tools are FREE (express version) to download and very intuitive to use. 2. What about the learning curve? If you know C#, (or any other programming language), learning curve is really flat. XAML (used for UI) may be new for you, but trust me; its very intuitive. Also you can use Microsoft Blend to generate the UI (XAML) for you. 3. How can I develop /test app without using actual device? How can I be sure my app runs as expected on actual device? The WP7 SDK comes along with an excellent emulator; which you can use for development/ testing on a computer. Later you can just change a setting and deploy the application on WP7. You will require Zune software for deploying the application on phone along with Developers key from WP7 marketplace. You can obtain key from marketplace by filling a form. The whole process for registering  is easy; just follow the steps on the site. 4. Which one should I use? Silverlight or XNA? Use Silverlight for enterprise/ business / utility apps. Use XNA for Games app. While each platform is capable / strong and may be used in conjunction as well; The methodologies used for development in these platforms are very different. XNA works on typical Do..While loop where as Silverlight works on event based methodology. 5. Where are the learning resources? Are they free? There is lots of stuff on WP7. Most of them are free. There is a excellent free book by Charles Petzold to download and http://www.microsoft.com/windowsphone is full of demos /todos / vidoes. All the exciting stuff was captured live and you can view it here; in case you were not able to catch it live!! @ http://livestre.am/AUfx. My talk starts from 3:19:00 timeline in the video!! Is there an app you miss on WP7? Do let me know about it and I may work on it for free !!! Keep discovering. Keep is Simple. WP7. Subodh

  Read the article

• What extra packages are needed by Amarok to transcode to MP3?

  - by Jon Pawley

  I'm using Amarok 2.6.0, on KDE version 4.9.3, on Kubuntu 12.04. I would like to be able to copy my music onto my MP3 player (in this case, my iPhone 3), but to transcode the tracks as I copy them over. However, when I right-click on the selected track, and choose "Copy to Collection" and select my iPhone, the option to transcode to MP3 is greyed out. What additional packages does Amarok need in order to enable the transcode to MP3 option? Thanks, Jon Oh, the "Amarok DIagnostics" output, from the Help menu gives: Amarok Diagnostics Amarok Version: 2.6.0 KDE Version: 4.9.3 Qt Version: 4.8.2 Phonon Version: 4.6.0 Phonon Backend: GStreamer (4.6.2) PulseAudio: Yes Amarok Scripts: Amarok Script Console 1.0 (stopped) Discogs 1.1b (stopped) Lyricwiki .2 (stopped) Free Music Charts 1.6.0 (stopped) Librivox.org 1.0 (stopped) Cool Streams 1.0 (stopped) BBC 1.1 (stopped) Amarok Plugins: AudioCd Collection (enabled) DAAP Collection (enabled) MTP Collection (enabled) MySQLServer Collection (enabled) MySQLe Collection (enabled) UPnP Collection (enabled) Universal Mass Storage Collection (enabled) iPod, iPad & iPhone Collection (enabled) Ampache (disabled) Jamendo (disabled) Last.fm (enabled) MP3 Music Store (disabled) MP3tunes (disabled) Magnatune Store (disabled) Podcast Directory (enabled) gpodder.net (enabled) Local Files & USB Mass Storage Backend (enabled) NFS Share Backend (enabled) SMB (Windows) Share Backend (enabled)

  Read the article

• SKYPE 4.1 Ubuntu 12.04 - Webcam's Image Upside Down and with Zoom

  - by ErivaldoJunior

  I'm trying do my notebook's webcam works on Skype 4.1, but I am not having success. The problem is that the webcam's image appears upside down and with zoom. This problem don't happen on Skype Version 2.1 (Beta). On Skype 2.1 (Beta) my webcam works perfectly. However, on Skype 4.1 the webcam's image is upside down and with zoom. I managed to solve only the upside down problem with the following commands: $ export LIBV4LCONTROL_FLAGS=3 $ LD_PRELOAD=/usr/lib/i386-linux-gnu/libv4l/v4l1compat.so skype After these commands the webcam's image become normal, but the image is still zoomed. I could not solve the zoom problem. To work around this I'm obligated to use the both versions (2.1 (beta) and 4.1). Does anyone know a way to make the image from my webcam stay perfectly normal? These are the information about my webcam: Bus 002 Device 003: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera It uses the driver "uvcvideo". And I'm using the Ubuntu 12.04 64 bits. Thank you very much!

  Read the article

• Part 7: EBS Modifications and Flagged Files in R12

  - by volker.eckardt(at)oracle.com

  Let me, based on my previous blog, explain the procedure of flagged files a bit better and facilitate the same with screenshots. Flagged files is a concept within the Oracle eBusiness Suite (EBS) release 12, where you flag a standard deployment file, let’s say a Forms file, a Package or a Java class file. When you run the patch analyse, the list of flagged files will be checked and in case one of these files gets patched, the analyse report will tell you. Note: This functionality is also available in release 11, here it is implemented and known as “applcust.txt”. You can flag as many files as you want, in whatever relationship they are with your customizations. In addition to the flag itself you can add a comment. You should use this comment to point to your customization reference (here XXAR_RPT_066 or XXAP_CUST_030). Consider the following two cases: You have created your own report, based on a standard report. In this case you will flag the report file itself, and the key views used. When a patch updates one of these files, you will be informed and can initiate a proper review and testing. (ex.: first line for ARXCTA.rdf) You have created an extensive personalization and because it is business critical you like to be informed if the page definition gets updated. In this case you register the PG.xml file as flagged file. (ex.: second line below for CreateExtBankAcctPG.xml) The menu path to register flagged files is the following: (R) System Administrator > (M) Oracle Applications Manager > Site Map > Maintenance > Register Flagged Files     Your DBA should now run the Patch Analyse every time he is going to apply a new patch. (R) System Administrator > (M) Oracle Applications Manager > Patch Wizard > Task “Recommend/Analyze Patches” The screenshot above shows the impact summary. For this blog entry the number “2” titled “Flagged Files Changed“ is in our focus. When you click the “2” you will get a similar screen like the first in this blog, showing you exactly the files which will get patched if you continue and apply this patch in this environment right now. Note: It is also shown that just 20% of all patch files will get applied. This situation might be different in case your environments are on a different patch level. For sure also the customization impact might then be different. The flagging step can be done directly in the Oracle Applications Manager.  Our developers are responsible for. To transport such a flag+comment we use a FNDLOAD script. It is suggested to put the flagged files data file directly into your CEMLI patch. Herewith the flagged files registration will be executed right at the same time when the patch gets applied. Process Steps: Developer: Builds CEMLI Reviews code and identifies key standard objects referenced Determines standard object files and flags them Creates FNDLOAD file and adds the same to the CEMLI patch DBA: Executes for every new Oracle standard patch the patch analyse in a representative environment Checks and retrieves the flagged files and comments Sends flagged file list back to development team for analyse / retest Developer: Analyses / Updates / Retests effected CEMLIs Prerequisite: The patch analyse has to be executed in an environment where flagged files have been registered. (If you run the patch analyse in a vanilla or outdated environment (compared to your PROD), the analyse will not be so helpful!) When to start with Flagged files? Start right now utilizing this feature. It is an invest to improve the production stability and fulfil your SLA!   Summary Flagged Files is a very helpful EBS R12 technique when analysing patches. Implement a procedure within your development process to maintain such flags. Let the DBA run the patch analyse in an environment with a similar patch and customization level as your current production.   Related Links: EBS Patching Procedures - Chapter 2-13 - Registered Flagged Files

  Read the article

• How to partition Seagate FreeAgent GoFlex 2TB hard disk?

  - by balki

  Hi I bought a new Seagate 2TB external hard disk. I opened the drive's application in my virtual windows, did product registration using the application present in it. I have few questions on how best to use it. The drive by default has some files and folders - setup.exe, System Volume Information, USB 3.0 PC Card Adapter etc,. I copied all the files to my laptop. Is it safe to delete these files? It has a dash board for windows which allows to tune power options, test the drive etc. Will I be able to use the dash board if I put back all these files and mount on windows again? I want to partition and format the hard disk. Data I like to store is Around 10 to 20 GB Files - Virtual box images. Around 4GB Files - Dvd images. Other Movies and personal Files. What is the best filesystem to store very huge files like 10 to 20GB files. So that they are written and accessed fast also best uses the drive's capacity. If I leave one of the partition as ntfs and others to different files systems, will it be able to mount on windows and Will I be able to use the device's dash board? Note: I dont need any encryption for my data. Any other advice on using the hard disk is also welcome.

  Read the article

• Doesn't boot after installation

  - by jchysk

  Downloaded Ubuntu 12.04.1-alternate-amd64 Installed to USB stick Integrity check fails on ./install/netboot/ubuntu-installer/amd64/pxelinux.cfg/default but that seems to be a known bug where the file isn't included in the alternative 64-bit ISO and shouldn't affect installation. I ignore it and proceed on. For partitioning on 2 SSD Drives: Partition 300MB and 63GB on both RAID1 the 300MB and 63GBs Set the 300MB to EXT4 on /boot Encrypt the rest as MD1 and set it for LVM Create two volumes from MD1: 4GB swap and 59GB to / I go through the installation and get to the point where it says everything is ready and to take the media out so as to boot from the drives I receive the error "Error: No video mode activated." on startup I've read that this can be solved by running "cp /usr/share/grub/*.pf2 /boot/grub" and then updating grub but I can't get to a place where I can actually run this command. In rescue mode I can get to a shell from installer with /boot mounted to /target. So from there I can run "cp /cdrom/boot/grub/font.pf2 /target/grub/" but can't figure out a way to get it to update grub after that or know how what to change in manually updating the grub.cfg file. If I try other devices to mount the root filesystem I get the error "An error occurred while mounting the device you entered for your root file system". It just sits on the video mode error and doesn't progress further. Googling around it seems like people see the error briefly before it continues booting, not getting stuck on it the way I am which leads me to believe that error may be unrelated to Ubuntu not booting. So any ideas as to what I should try next or what needs to be done to install Ubuntu and get it to boot would be helpful.

  Read the article

• Kinect will recognise your finger movement

  - by Boonei

  Sources inside Microsoft suggest they MS guys are tying to improve motion controller. This could be a huge boost to gaming. There are quite a few things that we can do with our fingers when playing games like driving, shooting,sports etc. If fingers are captured then  XBox will give more realistic version of our avatar. Eurogamer has also suggested the same according to their sources. It would be only(mostly) a software update and would not require a new camera, because the USB controller interface currently in place in Kinect can take in data up-to 35MBps. The current utilization is only around roughly 1/2 of it. So there is currently a facility to send more data. Little more tech data, Kinect does transmit 320×240-pixel in 30 fps, if the device could capture and transfer at 640×480 pixels, then better resolution can detect more movements compared to current level of detection. Lets wait and watch ! This article titled,Kinect will recognise your finger movement, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• "Why We Chose Fusion CRM" by Vikas Bhambri, Managing Partner, The Athene Group

  - by Natalia Rachelson

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A guest post by Vikas Bhambri, Managing Partner, The Athene Group This year The Athene Group (www.theathenegroup.com) celebrated our tenth anniversary. The company has accomplished a lot in ten years overcoming a number of hurdles and challenges to have grown organically to a 150+ person global company with offices in the US, UK, and India and customers in the US, Canada, and Europe. Now more than ever with the current global landscape from an economic and competitive standpoint it was vital that we make some changes to remain successful for the next ten years. There were two key initiatives that we discussed internally that would enable us to successfully accomplish this – collaboration and the concept of “insight to action”. With our existing Oracle CRM On Demand platform we had components of this but not the full depth and breadth that we were looking for. When we started to discuss Fusion CRM we immediately saw several next generation tools that would embrace these two objectives. For a consulting and development organization the collaboration required between business development and consulting delivery is as important as the collaboration required during the projects between the project delivery and account management teams. The Activity Streams functionality in Fusion CRM immediately addressed the communication of key discussion topics and exchanges around our clients. Of course when we saw the Oracle Social Network (which is part of our Fusion CRM roadmap) we were blown away. The combination OSN and our CRM is going to make us more effective as we discuss and work cohesively on client engagements – ensuring mutual success for both Athene and our clients. When we looked at “insight to action” we saw that we had a great platform when folks were at their desks, unfortunately a lot of our business development and consulting folks are on the road. The Fusion Mobile Sales and Fusion Outlook Desktop provide information to our teams when they are on the go. So that they can provide real-time information and react to real-time information provided by their peers. We are in the early stages of our transformative experience with Fusion CRM but we believe the platform along with our people and processes are going to help us achieve our goals in the future.

  Read the article

• 12.04 grub unable to boot on /sde, upgrade-grub and boot-repair failed, please help

  - by VGR

  My problem is I've 4 disks in a raid array listed as sda, sdb... sdd and grub 2 refuses to boot on /sde (the 5th disk, standalone and containing a clean install of 12.04 64 bits). I tried all solutions but all fail. (live CD/USB with grub-setup, also tried repair-grub, and tried also in the "grub rescue" set prefix= etc). I also tried to deactivate the RAID array in the BIOS, but I'd rather not destroy it, and I didn't find a way to make the standalone disk as '/sda1' (this would satisfy grub). In the BIOS, the would-be /sda is the only bootable hard disk; it ends up as /sde and grubs complains. I've made repair-grub issue a pastebin. I always end up in grub-rescue and I'm stuck. I need Ubuntu to boot so that I can add the device array handler for my disks. I can't switch the disks and I can't disconnect the SATA RAID controller. I need: (a) a workaround so that grub starts on /sde; or (b) a way to change the order in which Ubuntu sees the disks, at boot time. I could then provide grub with a /sda1. Thanks a lot. up please thanks a lot it's not the same problem as booting ubuntu from raid. My RAID array serves only of data repository windows had no problem with this configuration

  Read the article

• boot up fails. drops to initramfs prompt 12.04

  - by dpm

  I am running an HP pavilion dv6000 dual boot win7 and Ubuntu 12.04. (well, up until today). after a reboot, the boot process drops to the busy box shell and i end up at the prompt: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Ive been researching others who have had this same problem, but haven't been able to find any of those solutions to work for me. I tried the method described here: http://www.proposedsolution.com/solutions/ubuntu-booting-to-initramfs-prompt/ and after the final command mount -t ntfs-3g /dev/sda1 /root -o force it does nothing and gives me another (initramfs) prompt. I can boot to a live CD (USB) and get to a terminal, but it doesn't seem to do much good, as I can see the /dev/sda1 in the ls command, but it doesn't recognize it when I try to cd to it. My command line skills are very green, and am just starting to grasp them. One more question: using the command fdisk -l how can I tell which mount point (sda1/sda2) is my windows partition and which one is Ubuntu? Any help? I'm in a bit over my head right now...

  Read the article

• Frequent Disconnects with an Intel 3945ABG Wireless Card

  - by Alex Forsythe

  I'm brand new to Ubuntu, and I really love it so far, but one issue I have encountered is that my WLAN is disconnecting about every 5-10 minutes. Often times the connection is repaired automatically, but sometimes the network manager will repeatedly reject my encryption key (which of course is correct). Occasionally after a disconnect, the wireless network fails to show up at all. The only way I can solve this seems to be by completely restarting Ubuntu or connecting with a USB wireless adapter. I am using WPA/WPA2 encryption, which I've read can cause problems with network-manager, but I experience the exact same issues with WICD. I should probably note that I've not experienced any of these issues using Windows 7 on my other partition. I have a hunch that there may be a better driver out there for my card, but I have no idea how to go about searching for it or installing it. Any help would be really appreciated! lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric lspci -nnk 09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02) Subsystem: Dell Device [1028:0201] Kernel driver in use: tg3 Kernel modules: tg3 0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Device [8086:1020] Kernel driver in use: iwl3945 Kernel modules: iwl3945 rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no

  Read the article

< Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >