Search Results

Search found 1409 results on 57 pages for 'bobby jack'.

Page 54/57 | < Previous Page | 50 51 52 53 54 55 56 57  | Next Page >

  • Ubuntu/Nvidia lists DVI dual cable as single

    - by Joseph Mastey
    I have an NVidia Quadro FX 880M graphics card, from which I am trying to drive 2 monitors: my internal laptop montior (15.6", 1920x1080, Nvidia driver says it's running via DisplayPort) and an external 27" monitor (Dell U2711, 2560x1440 native resolution, via DVI). I've hooked the dual DVI cable to the dual DVI port on my dock (Dell PR03X) and installed the proprietary NVidia driver, but I cannot seem to get the full 2560x1440 out of the larger 27" external monitor. Looking at the NVidia driver settings, the monitor's connection is reported as a single DVI cable, rather than a dual one, which would explain the reduced resolution. Does anyone have any experience with an issue like this? What can I do to make full use of my new monitor? (Possibly) Relevant Information: There is no DVI port on the laptop itself, but one is provided via the dock. The laptop and dock both provide a DisplayPort jack, but I have been unable to get this working on either w/ the monitor. I did have the nouveau driver installed when I installed the nvidia proprietary driver, but have since removed it (no change in the monitor situation when I removed it). The 27" reports a max resolution of 1680x1050. Thanks, Joe

    Read the article

  • iBook G4 has black screen on boot

    - by Jonathan Patt
    I have an old iBook G4 (A1054, 1.2 GHz) which has issues when it loses power or is shut off. If the battery drains—which happens quickly, as its remaining capacity is very low—it enters some sort of weird mode where it's not really awake (the screen is black, can't do anything) but it has no pulsing light indicating it's asleep either. The only way to exit this mode is to hold down the power button for ten seconds until it shuts off, and attempt rebooting it. Almost always, however, it makes the sound of the optical drive starting up, and then doesn't continue past that point. The screen doesn't come on, and things like resetting PRAM don't work. Occasionally a fan comes on loudly for a second or two. This sometimes seems to correspond with my pressing down on the rear-right casing, above the power jack. In the past, shutting it off, disconnecting it from power, removing the battery and waiting for 30 minutes would do the trick, but this time I have done that several times, letting it sit for up to several hours before retrying, to no avail. Any ideas?

    Read the article

  • Tell VLC where to look for plugins.dat file

    - by puk
    I am trying to build vlc from source (I will include installation script below), but when I try to run vlc I get the following error main libvlc warning: cannot read /home/user/downloads/vlc3/vlc/src/.libs/vlc/plugins/plugins.dat (No such file or directory) Why is it even looking in that non existant directory? The plugins.dat file is in /usr/lib/vlc/plugins/. I tried export VLC_PLUGIN_PATH=/usr/lib/vlc/plugins/ But it still looks in that non existent path. I can create a symbolic link, but that is a terrible way to do it. If in 6 months I delete my downloads folder, all of a sudden my vlc will break. Here is the script I am running to install: ./configure --enable-rpi-omxil --enable-dvbpsi --enable-x264 --enable-xcb --with-x --enable-xvideo --enable-sdl --enable-avcodec --enable-avformat --enable-swscale --enable-mad --enable-a52 --enable-libmpeg2 --enable-dvdnav --enable-faad --enable-vorbis --enable-ogg --enable-theora --enable-mkv --enable-freetype --enable-fribidi --enable-speex --enable-flac --enable-live555 --enable-caca --enable-skins2 --enable-alsa --enable-ncurses --enable-debug --enable-lirc --enable-live555 --enable-shout --enable-taglib --enable-vcdx --enable-realrtsp --enable-svg --enable-dvdread --enable-dc1394 --enable-twolame --enable-dirac --enable-aa --enable-jack --enable-bluray --enable-opencv --enable-sftp --enable-pulse --enable-projectm --enable-vsxu --enable-atmo --enable-glspectrum '--with-extra-libs=/usr/local/lib' '--with-extra-includes=/usr/local/include' '--x-libraries=/usr/local/lib' '--x-includes=/usr/local/include' '--prefix=/usr/local' '--mandir=/usr/local/man' '--infodir=/usr/local/info/' EDIT: I am using the following version: VLC media player 2.2.0-git Weatherwax (revision 2.1.0-git-1168-g5804dd1) And the --plugin-path option is no longer supported.

    Read the article

  • Downmix ALL SYSTEM audio to mono - Windows 7

    - by Mike K.
    I'm deaf in one ear and want to use my headphones when playing a game and talking with my friends on Skype/TS/Mumble/etc while also sometimes listening to music. I need ALL my system audio to be downmixed to mono so that my ONE hearing ear gets ALL audio channels instead of split stereo audio. No, none of the other similar questions on superuser have a solution. My headphone properties does not have a 'Mono' option, I don't have a 'Headphone Virtualization' option, and my Realtek HD audio driver software doesn't have these options either (driver was updated 11/14/2012). Don't even talk about setting the balance of one side of the headphones to 0. You're not paying attention if you suggest that. JACK and Virtual Audio Cable didn't work. It's possible I configured them wrong, but I followed the steps I found in related questions and still got split stereo out. TL;DR I need a viable, working, software solution (I say software because I have a USB headset) for forcing ALL system audio to mono so that I can hear literally everything through the one earpiece. Thanks!

    Read the article

  • Separate computers in my apartment can't communicate to each other?

    - by Razor Storm
    In my apartment, the management provides the building with a network connection. I have my computer plugged into the ethernet coming out of the walls, and my friend who also lives in the apartment building has his computer connected to a separate ethernet jack. As far as I know our two computers are not within a LAN, and ipconfig shows that we only have external ip addresses. The problem, then, appears when we attempt make direct communication between our computers. I have some hosting server set up on my machine, and my friend is unable to connect to it via my ip address. Other people who do not live in the apartment can connect fine. Ethernet adapter Local Area Connection: IPv4 Address. . . . . . . . . . . : 204.29.113.41 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : 204.29.112.1 His ip: 204.29.113.104 Using a fulltunnel vpn doesn't help.

    Read the article

  • Distorted Sound

    - by BCable
    I have my laptop hooked up to my receiver for sound output. I hear a hissing/crackling background sound that is really loud and hard to just ignore (but possible). When my 360 is connected, the sound comes out perfect, so it's just with this laptop. Previously, I thought it was just my laptop and just submissively just let it slide. I just bought a brand new laptop though and it's doing the same thing. I have found out more information now that I know it's not my laptop. I have used this laptop in similar environments where it worked just fine (different speakers). I have bought a new cable to connect to my receiver and it did nothing (headphone jack to RCA). I tried different ports on the receiver (Video 1-3) and it always happens. I have discovered that the sound goes away if I unplug my laptop (so it's running on battery). Because of the last one, I tried plugging my laptop into a different outlet across the room and it's STILL doing it. Doesn't matter if I boot to Linux or Windows, yet my phone (Android G1) doesn't cause this sound using the exact same cable. Any ideas? I'm out of them! Thanks!

    Read the article

  • Outlook 2007 - Right Click Email > Move To {Folder Name}

    - by HK1
    I know it seems like an elementary question. What's the simplest and fastest way to move a read/completed email to a different folder in Outlook 2007 (connected to Exchange 2007)? I have a particular user that is challenged by technology. Using keyboard shortcuts is not an option. Dragging and dropping things - forget it. And too many clicks is frustrating to him. He keeps his email inbox completely clean (OCD=True) but he does that by deleting every single email as quickly as he's done with it. If an email can't be resolved in a day or two it almost drives him to insanity. As far as he's concerned, there's only one right thing to do with an email - reply to it and then delete it. He's being asked to save emails unless they are clearly trash. I'm trying to figure out what the simplest method is to move an email to a "Saved Emails" or "Archived" folder (don't confuse "folder" with .PST file, that's irrelevant for this discussion). I envisioned that I could possibly hi-jack every delete and put the email in his Saved folder. But I don't like this option because some emails are truly trash and I don't want him saving those. What I'd really like to do is something like this: Right Click Email in List > Move To {Folder Name} Is there a simple way to do this? Maybe someone has another suggestion on how to handle this situation.

    Read the article

  • Triple-monitor set-up (2 unique, 1 cloned): Can a VGA splitter be used on one output of a dual-head

    - by stakx
    Background: I'm currently researching hardware components for some kind of information terminal we're building. This application of ours makes use of three output screens: (1) A touch screen where all user input is made; (2) A regular LCD monitor where the requested information is being displayed; and (3) A projector which displays exactly the same signal as screen (2) does. (All screens will run at the same resolution of 1024x768 btw.) Now I figured that using a dual-head video card would be sufficient, let's say a Matrox P690 low-profile PCI card. This would involve having a Y cable connected to the graphics card itself, then two DVI-to-VGA adapters at each end of the Y cable, and then having a VGA splitter on one of the VGA outputs. The following shows the setup in question: 0--1---------2-> VGA (DSUB-15) \ \ ----2-3---------> VGA (DSUB-15) \ \ -----------------> VGA (DSUB-15) 0: graphics card (LFH60 jack) 1: LFH60 to DVI-I dual monitor Y cable 2: DVI-to-VGA adapters 3: VGA splitter cable Question(s): Will this work? I'm particularly concerned about the following points: Can a low-profile PCI video card output a signal which is strong enough for three monitors (even if it's a dual-head card)? Does the combination of so many adapters and splitter cables work? (The LFH-to-DVI cable comes with the video card) Will the VGA splitter cable degrade the signal on the output screen & projector significantly? (If so, would a USB-powered splitter cable remedy this problem?) I can't possibly expect anyone to answer all those questions, but any input is appreciated.

    Read the article

  • Optical Audio out stuck on on a MacBook

    - by Clinton Blackmore
    Apple have made an interesting headphone port for the MacBook (and some other Intel Mac models). It works like a standard jack: nothing plugged in - audio comes out of built-in speakers headphones/external speakers plugged in - plays through headphones/external speakers but you can also use a special adapter (which trips a tiny microswitch) to get an optical audio out signal (which you can presumably plug into a nice surround-sound system). This is all well and good except when, like auto-tracking, it doesn't work, and you are left with nothing to adjust. Users report that they get no sound when they have nothing plugged in and that a red light emanates from the headphone port. If you go to System Preferences - Sound - Output, it will say (IIRC) "Optical Out" instead of "Internal Speakers". The only solution I'm aware of is to try to reset the switch by inserting and removing a set of headphones or a toothpick, perhaps wiggling it inside of the port, and hoping that you luck out and get it. Are there other ways to fix this problem? Does anyone know where the microswitch is or have a good technique to reset it?

    Read the article

  • Why is my connection slow?

    - by Jay R.
    I have a Dell Precision T5400 with a Broadcom 1Gb onboard NIC. For some strange reason, when I access machines on our local network, the best I can get is around 125KB/s download speed. My laptop that has a 10/100Mb NIC onboard usually gets around 300KB/s or better from the same network resource. Both machines are plugged into the same 1Gb switch which connects to our local network wall jack at 100Mb half duplex. There is also a printer plugged into the same switch at 100Mb full. The resource I'm using for the test is a 30MB zip file copied from a jetty webserver that is running as part of a cruisecontrol installation. The cruisecontrol installation is running WindowsXP with full real-time antivirus and Altiris patch management and inventory running. That stuff on its own is eating some of the download speed. I've seen the laptop reach into the multiple MB/s download speed before, but the desktop never seems to get past 125KB/s to 130KB/s. In WindowsXP, before I upgraded the driver in the desktop, it was that slow. In Fedora, it is still slow even though it appears to be using the same driver version as the upgraded Windows driver. The upgraded Windows driver is faster, but still not nearly as fast as the laptop. What gives? Any insight to improve the situation would be appreciated. Could it be that the BroadCom board just isn't that good, or the driver in linux is just not as good as the Windows one?

    Read the article

  • Does a mini PCIe SSD fit into a Acer Aspire One?

    - by Narcolapser
    Question: What, if any, mini PCIe SSDs fit into the mini PCIe slot of the Acer Aspire one AOD250? Info: I have an Aspire One and I've been considering loading it with an SSD. The mini PCIe drives fascinate me and so I want to try that approach. Also they tend to be cheaper and not much slower. (at least not on Read time which matters more for a netbook) But I've heard that some times computers don't support certain mini PCIe cards. And I was wondering if anyone knew about the Aspire One? I tried asking Acer tech support, but they didn't know jack and spent the whole time informing that I would have to support my Ubuntu install on my own, which I was. Anyway. Rant Aside, I'm looking at this drive: http://www.newegg.com/Product/Product.aspx?Item=N82E16820183252 It states it is exclusively for the Eee PC. now does that mean It was designed for the Eee PC but will work in my netbook. or is something going to go wrong? (like right now my concern is it physically not fitting.) Any information would be appreciated. o7

    Read the article

  • Simulating audio playback on headless linux server

    - by afro
    Hi people, We have a headless linux server (Debian 5) we use for runnin integration tests of our web-page code. Among these tests are ones implemented using Selenium, which practically simulates a user browsing our pages and clicking on things. One of these tests is failing now, because it involves starting a flash-based audio player and checking to see whether the progress bar gets displayed properly. The reason this test fails is that there is no way to play the audio, and no sound card on the machine, which has simple webserver hardware. So, my question would be: Is there a simple way of giving a program the impression that its audio output is being processed, and playback is taking place? I don't have to record the playback, or redirect it or anything like that, just a dummy soundcard, like the dummy X-server we aer using, which actually does not need to display stuff. I have tried using JACK, but it's too complicated, and the documentation does not even answer this very simple question. I also installed alsa on the server; it 'pretends' to run, but when a program tries to play audio, just spews error and debug information having to do with the non-existence of a soundcard. It would be really awesome if one of you has a simple answer to this question. Cheers, Ulas

    Read the article

  • Asus K50I sound issues

    - by MrStatic
    I have an Asus K50IJ (Bestbuy) laptop and have issues with my sound. Speakers themselves work fine but when I plug into the headphone jack it auto mutes the front channel and no sounds comes out of either the speakers or the headphones. If I then unmute the channel I get sound from both the speakers and the headphones. alsamixer shows the Headphone channel as all grayed out. /etc/modprobe.d/alsa-base.conf I have tried snd-hda-intel model="asus-laptop" and snd-hda-intel model="asus" In Sound Preferences I have gone to output and changed the Connector to 'Analog Headphones' that results in no sound from either speakers or headphones. As one forum suggested I tried to comment out blacklist snd_pcsp in the blacklist.conf which resulted in no change. lspci -v shows: 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) Subsystem: Santa Cruz Operation Device 1043 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at fe9f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel

    Read the article

  • Defragging Host OS of VMWare

    - by JackLocke
    Hi All, I want to ask something that has been puzzling me from last few days. I will try to explain my problem as clear as I can ... I have VMWare Workstation installed in my machine. And I use one separate 100Gb drive which stores all of my virtual machines, nothing else. Now, last week I was playing with a De-fragmentation tool called "Smart Defrag" which showed me in its analysis report that my drive where I am currently storing all of my Virtual Machines has more than 80% of fragmentation !!! Now my question is ... What will be the effect on my Guest / VM machine performance if I defrag my Host machine ... I mean this Host machine is essentially storing those virtual machines, but still dont have any direct access to what ever is stored in those machines ... so defraging the host should not cause any problem. But before proceeding, I want to hear from other people who may have met same problem. I will really appreciate any help ... BTW, I am using Windows 7 as Host and the guest machines I am using are Windows 2008 & 2003 & Ubuntu 10.04 THanks, Jack

    Read the article

  • No sound out of headphone port on laptop

    - by Thanatos
    I cannot get sound out of the headphone port on a laptop. Headphones are plugged in, and sound comes out of the internal speakers. Windows behaves normally (sound switches to headphones when headphones are inserted). It did work in Linux at one point, but something changed, we're just not sure what. Rebooting doesn't fix. This appears to occur whether or not PulseAudio is running. Things I've tried: Rebooting. No effect. Booting into Windows. It works properly, so probably not a hardware issue. All of alsamixer. My only controls are this: "Master" Volume bar & mutable, unmuted. Controls volume. "PCM" Volume bar only. 100%. "S/PDIF" Mutable only, currently muted, has no effect. "S/PDIF" Default PCM", Mutable only, currently unmuted, has no effect. Killing PulseAudio. No effect. (It also won't stay dead! Something appears to be restarting it, and I can't tell what, but it is annoying as fuck.) alsactl init 0, no effect. sudo rm -f /var/lib/alsa/asound.state, no effect. General system info: Ubuntu 10.04 LTS Toshiba Satellite T135D-S1324 lspci says I have: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller Some edits: Yes, the headphones are in all the way. This works in Windows: You plug headphones in, the internal speakers stop making noise, and noise comes out the head phones. Windows says I only have two sound cards: the HDMI port (which I don't care about) and the "sound card", which it claims is a "Conexant Pebble High Definition SmartAudio" In Windows, both the internal speakers and the headphone jack show up as one soundcard, which in my experience, is typical. (This is a laptop)

    Read the article

  • Computer making strange sound when turned on, ever since power outage

    - by Dot NET
    Recently we experienced a power outage, and the PC was off. However, once the power came back, I switched on the PC and heard a strange noise - almost as if the hard disk or fans were struggling to work. I can't really describe the sound, but it's a laboured, loud sound almost like a jack-hammer. This has been persisting ever since the power outage, however the noise stops after around 10 minutes or so, and doesn't start again until the computer is turned off and on again. At first I thought it had something to do with the HDD, but all my files are intact, chkdsk did not report any issues and performance is 100% unchanged, even in games (so the gfx card is fine, and so is the HDD most likely). My PC setup basically has around 3 cooling fans, but I'm not sure if it's one of these either as the noise actually stops after 10 minutes or so, and if I leave the PC on for 4 hours (for example) the noise never starts again. It's there solely when turning on the PC. I haven't got a UPS, and it's important to note that the computer was not on when the power went out - it was merely plugged in. I then promptly unplugged the PC once the power was out, and only plugged it in again when the power came back. Could it be the power supply? Unfortunately I can't open my tower as I would void the warranty. Are there any tests which I could carry out without voiding the warranty?

    Read the article

  • DVI output only working on Windows, not during booting or on Linux

    - by Mononofu
    So yesterday I booted my laptop up and the external monitor I have it connected to just stayed black. At first, I thought the problem would go away when Ubuntu was loaded, but it didn't. I tried to reboot a few times, to no avail. Then I decided to give Windows 7 a try, and suddenly (at the login-screen), my external monitor turned on and worked like normal. I have connected the monitor via DVI, and this only seems to work with Windows now. I don't even get a signal in my BIOS! Mind you, everything was working fine before that, and I didn't change a single thing. I then tried to connect the monitor via VGA (from my DVI jack, which can output VGA using an adaptor), and it worked again. However, 1920x1200 using VGA looks like crap - black print on white background is basically illegible. Do you have any ideas how to fix this peculiar problem? I only use windows for gaming, so it's no real help that it still works normally. Please also excuse any spelling mistakes, I am practically typing this blindly. Edit: I only have one graphics card in my laptop, and I can't select anything related to that in my BIOS. In fact, I can pretty much do almost nothing there. My laptop is a Nexoc Osiris E703, graphics gard is a GeForce Go 7900 GTX. As I mentioned before, DVI output during booting and on Ubuntu was working fine for years before yesterday!

    Read the article

  • DVI output _only_ working on Windows, not during booting or on Linux

    - by Mononofu
    So yesterday I booted my laptop up and the external monitor I have it connected to just stayed black. At first, I thought the problem would go away when Ubuntu was loaded, but it didn't. I tried to reboot a few times, to no avail. Then I decided to give Windows 7 a try, and suddenly (at the login-screen), my external monitor turned on and worked like normal. I have connected the monitor via DVI, and this only seems to work with Windows now. I don't even get a signal in my BIOS! Mind you, everything was working fine before that, and I didn't change a single thing. I then tried to connect the monitor via VGA (from my DVI jack, which can output VGA using an adaptor), and it worked again. However, 1920x1200 using VGA looks like crap - black print on white background is basically illegible. Do you have any ideas how to fix this peculiar problem? I only use windows for gaming, so it's no real help that it still works normally. Please also excuse any spelling mistakes, I am practically typing this blindly. Edit: I only have one graphics card in my laptop, and I can't select anything related to that in my BIOS. In fact, I can pretty much do almost nothing there. My laptop is a Nexoc Osiris E703, graphics gard is a GeForce Go 7900 GTX. As I mentioned before, DVI output during booting and on Ubuntu was working fine for years before yesterday!

    Read the article

  • How do I activate the F_LINE input in a transplanted HP chassis?

    - by admin
    I have an HP Pavilion Media Center PC chassis, vintage 2003 or so and I replaced the motherboard in it with a newer (vintage 2009) HP motherboard, M2N68-LA (Narra 5). I have scoured the internet trying to find pinouts for the motherboard to no avail. My question concerns the front panel audio, specifically Line In. The old chassis was built for AC97 but the new mobo is build for the newer HD audio standard. I figured out by comparison & experimentally how to connect the Mic & Headphone jacks to the HD audio header of the mobo by adding a manual switch to set the SENSE lines. Now all works fine for Mic & headphone. The old chassis also has a front panel Line In jack that the newer HP chassis does not have. However, the new mobo has a 4 pin white connector labeled F_LINE that I believe is a line input. Under Windows 7 I see the two Line Inputs in the mixer but I can't get one of them to become active. The 4 pin F_LINE connector uses the two middle pins for ground, and presumably the other two for left and right audio inputs. There are no pins for sensing on that connector. Can anyone tell me how to use that F_LINE input for the front panel, or how to activate it?

    Read the article

  • Records not being saved to core data sqlite file

    - by esd100
    I'm a complete newbie when it comes to iOS programming and much less Core Data. It's rather non-intuitive for me, as I really came into my own with programming with MATLAB, which I guess is more of a 'scripting' language. At any rate, my problem is that I had no idea what I had to do to create a database for my application. So I read a little bit and thought I had to create a SQL database of my stuff and then import it. Long story short, I created a SQLite db and I want to use the work I have already done to import stuff into my CoreData database. I tried exporting to comma-delimited files and xml files and reading those in, but I didn't like it and it seemed like an extra step that I shouldn't need to do. So, I imported the SQLite database into my resources and added the sqlite framework. I have my core data model setup and it is setting up the SQLite database for the model correctly in the background. When I run through my program to add objects to my entities, it seems to work and I can even fetch results afterward. However, when I inspect the Core Data Database SQLite file, no records have been saved. How is it possible for it to fetch results but not save them to the database? - (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions{ //load in the path for resources NSString *paths = [[NSBundle mainBundle] resourcePath]; NSString *databaseName = @"histology.sqlite"; NSString *databasePath = [paths stringByAppendingPathComponent:databaseName]; [self createDatabase:databasePath ]; NSError *error; if ([[self managedObjectContext] save:&error]) { NSLog(@"Whoops, couldn't save: %@", [error localizedDescription]); } // Test listing all CELLS from the store NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init]; NSEntityDescription *entityMO = [NSEntityDescription entityForName:@"CELL" inManagedObjectContext:[self managedObjectContext]]; [fetchRequest setEntity:entityMO]; NSArray *fetchedObjects = [[self managedObjectContext] executeFetchRequest:fetchRequest error:&error]; for (CELL *cellName in fetchedObjects) { //NSLog(@"cellName: %@", cellName); } -(void) createDatabase:databasePath { NSLog(@"The createDatabase function was entered."); NSLog(@"The databasePath is %@ ",[databasePath description]); // Setup the database object sqlite3 *histoDatabase; // Open the database from filessytem if(sqlite3_open([databasePath UTF8String], &histoDatabase) == SQLITE_OK) { NSLog(@"The database was opened"); // Setup the SQL Statement and compile it for faster access const char *sqlStatement = "SELECT * FROM CELL"; sqlite3_stmt *compiledStatement; if(sqlite3_prepare_v2(histoDatabase, sqlStatement, -1, &compiledStatement, NULL) != SQLITE_OK) { NSAssert1(0, @"Error while creating add statement. '%s'", sqlite3_errmsg(histoDatabase)); } if(sqlite3_prepare_v2(histoDatabase, sqlStatement, -1, &compiledStatement, NULL) == SQLITE_OK) { // Loop through the results and add them to cell MO array while(sqlite3_step(compiledStatement) == SQLITE_ROW) { CELL *cellMO = [NSEntityDescription insertNewObjectForEntityForName:@"CELL" inManagedObjectContext:[self managedObjectContext]]; if (sqlite3_column_type(compiledStatement, 0) != SQLITE_NULL) { cellMO.cellName = [NSString stringWithUTF8String:(char *)sqlite3_column_text(compiledStatement, 0)]; } else { cellMO.cellName = @"undefined"; } if (sqlite3_column_type(compiledStatement, 1) != SQLITE_NULL) { cellMO.cellDescription = [NSString stringWithUTF8String:(char *)sqlite3_column_text(compiledStatement, 1)]; } else { cellMO.cellDescription = @"undefined"; } NSLog(@"The contents of NSString *cellName = %@",[cellMO.cellName description]); } } // Release the compiled statement from memory sqlite3_finalize(compiledStatement); } sqlite3_close(histoDatabase); } I have a feeling that it has something to do with the timing of opening/closing both of the databases? Attached I have some SQL debugging output to the terminal 2012-05-28 16:03:39.556 MedPix[34751:fb03] The createDatabase function was entered. 2012-05-28 16:03:39.557 MedPix[34751:fb03] The databasePath is /Users/jack/Library/Application Support/iPhone Simulator/5.1/Applications/A6B2A79D-BA93-4E24-9291-5B7948A3CDF4/MedPix.app/histology.sqlite 2012-05-28 16:03:39.559 MedPix[34751:fb03] The database was opened 2012-05-28 16:03:39.560 MedPix[34751:fb03] The database was prepared 2012-05-28 16:03:39.575 MedPix[34751:fb03] CoreData: annotation: Connecting to sqlite database file at "/Users/jack/Library/Application Support/iPhone Simulator/5.1/Applications/A6B2A79D-BA93-4E24-9291-5B7948A3CDF4/Documents/MedPix.sqlite" 2012-05-28 16:03:39.576 MedPix[34751:fb03] CoreData: annotation: creating schema. 2012-05-28 16:03:39.577 MedPix[34751:fb03] CoreData: sql: pragma page_size=4096 2012-05-28 16:03:39.578 MedPix[34751:fb03] CoreData: sql: pragma auto_vacuum=2 2012-05-28 16:03:39.630 MedPix[34751:fb03] CoreData: sql: BEGIN EXCLUSIVE 2012-05-28 16:03:39.631 MedPix[34751:fb03] CoreData: sql: SELECT TBL_NAME FROM SQLITE_MASTER WHERE TBL_NAME = 'Z_METADATA' 2012-05-28 16:03:39.632 MedPix[34751:fb03] CoreData: sql: CREATE TABLE ZCELL ( Z_PK INTEGER PRIMARY KEY, Z_ENT INTEGER, Z_OPT INTEGER, ZCELLDESCRIPTION VARCHAR, ZCELLNAME VARCHAR ) ... 2012-05-28 16:03:39.669 MedPix[34751:fb03] CoreData: annotation: Creating primary key table. 2012-05-28 16:03:39.671 MedPix[34751:fb03] CoreData: sql: CREATE TABLE Z_PRIMARYKEY (Z_ENT INTEGER PRIMARY KEY, Z_NAME VARCHAR, Z_SUPER INTEGER, Z_MAX INTEGER) 2012-05-28 16:03:39.672 MedPix[34751:fb03] CoreData: sql: INSERT INTO Z_PRIMARYKEY(Z_ENT, Z_NAME, Z_SUPER, Z_MAX) VALUES(1, 'CELL', 0, 0) ... 2012-05-28 16:03:39.701 MedPix[34751:fb03] CoreData: sql: CREATE TABLE Z_METADATA (Z_VERSION INTEGER PRIMARY KEY, Z_UUID VARCHAR(255), Z_PLIST BLOB) 2012-05-28 16:03:39.702 MedPix[34751:fb03] CoreData: sql: SELECT TBL_NAME FROM SQLITE_MASTER WHERE TBL_NAME = 'Z_METADATA' 2012-05-28 16:03:39.703 MedPix[34751:fb03] CoreData: sql: DELETE FROM Z_METADATA WHERE Z_VERSION = ? 2012-05-28 16:03:39.704 MedPix[34751:fb03] CoreData: sql: INSERT INTO Z_METADATA (Z_VERSION, Z_UUID, Z_PLIST) VALUES (?, ?, ?) 2012-05-28 16:03:39.705 MedPix[34751:fb03] CoreData: sql: COMMIT 2012-05-28 16:03:39.710 MedPix[34751:fb03] CoreData: sql: pragma cache_size=200 2012-05-28 16:03:39.711 MedPix[34751:fb03] CoreData: sql: SELECT Z_VERSION, Z_UUID, Z_PLIST FROM Z_METADATA 2012-05-28 16:03:39.712 MedPix[34751:fb03] The contents of NSString *cellName = Beta Cell 2012-05-28 16:03:39.712 MedPix[34751:fb03] The contents of NSString *cellName = Gastric Chief Cell ... 2012-05-28 16:03:39.714 MedPix[34751:fb03] The database was prepared 2012-05-28 16:03:39.764 MedPix[34751:fb03] The createDatabase function has finished. Now fetching. 2012-05-28 16:03:39.765 MedPix[34751:fb03] CoreData: sql: SELECT 0, t0.Z_PK, t0.Z_OPT, t0.ZCELLDESCRIPTION, t0.ZCELLNAME FROM ZCELL t0 2012-05-28 16:03:39.766 MedPix[34751:fb03] CoreData: annotation: sql connection fetch time: 0.0008s 2012-05-28 16:03:39.767 MedPix[34751:fb03] CoreData: annotation: total fetch execution time: 0.0016s for 0 rows. 2012-05-28 16:03:39.768 MedPix[34751:fb03] cellName: <CELL: 0x6bbc120> (entity: CELL; id: 0x6bbc160 <x-coredata:///CELL/t57D10DDD-74E2-474F-97EE-E3BD0FF684DA34> ; data: { cellDescription = "S cells are cells which release secretin, found in the jejunum and duodenum. They are stimulated by a drop in pH to 4 or below in the small intestine's lumen. The released secretin will increase the s"; cellName = "S Cell"; organs = ( ); specimens = ( ); systems = ( ); tissues = ( ); }) ... Sections were cut short to abbreviate. But note that the fetch results contain information, but it says that total fetch execution was for "0" rows? How can that be? Any help will be greatly appreciated, especially detailed explanations. :) Thanks.

    Read the article

  • C++ Deck and Card Class Error with bad alloc

    - by user3702164
    Just started learn to code in school. Our assignment requires us to create a card game with card,deck and hand class. I am having troubles with it now and i keep getting exception: std::bad_alloc at memory location. Here are my codes right now CardType h: #ifndef cardType_h #define cardType_h #include <string> using namespace std; class cardType{ public: void print(); int getValue() const; string getSymbol() const; string getSpecial() const; string getSuit() const; int checkSpecial(int gscore) const; cardType(); cardType(string suit,int value); private: int value; string special; string symbol; string suit; }; #endif CardType cpp: #include "cardType.h" #include <iostream> #include <string> using namespace std; void cardType::print() { cout << getSymbol() << " of " << getSuit() << ", having the value of " << getValue() << "."<< endl <<"This card's special is " << getSpecial() << endl; } int cardType::getValue() const { return value; } string cardType::getSymbol() const { return symbol; } string cardType::getSpecial() const { return special; } string cardType::getSuit() const { return suit; } cardType::cardType(){ value=0; symbol="?"; special='?'; suit='?'; } cardType::cardType(string s, int v){ suit = s; value = v; switch(v){ case 1: // Ace cards have a value of 1 and have no special type symbol="Ace"; special="None"; break; case 2: // 2 cards have a value of 2 and have no special type symbol="2"; special="None"; break; case 3: symbol="3"; // 3 cards have a value of 3 and have no special type special="None"; break; case 4: symbol="4"; // 4 cards have a value of 0 and have a special type "Reverse" which reverses the flow of the game special="Reverse"; value=0; break; case 5: symbol="5"; // 5 cards have a value of 5 and have no special type special="None"; break; case 6: symbol="6"; // 6 cards have a value of 6 and have no special type special="None"; break; case 7: symbol="7"; // 7 cards have a value of 7 and have no special type special="None"; break; case 8: symbol="8"; // 8 cards have a value of 8 and have no special type special="None"; break; case 9: symbol="9"; // 9 cards have a value of 0 and have a special type "Pass" which does not add any value to the game and lets the player skip his turn. special="Pass"; value=0; break; case 10: symbol="10"; // 10 cards have a value of 10 and have a special type "subtract" which instead of adding the 10 value to the total game it is subtracted instead. special="Subtract"; value=10; break; case 11: // Jack cards have a value of 10 and have no special type symbol="Jack"; special="None"; value=10; break; case 12: // Queens cards have a value of 10 and have no special type symbol="Queen"; special="None"; value=10; break; case 13: symbol="King"; // King cards have a value of 0 and have a special type "NinetyNine" which changes the total game score to 99 reguardless what number it was previously special="NinetyNine"; value=0; break; } } int cardType::checkSpecial(int gscore) const{ if(special=="Pass"){ return gscore; } if(special=="Reverse"){ return gscore; } if(special=="Subtract"){ return gscore - value; } if(special=="NinetyNine"){ return 99; } else{ return gscore + value; } } DeckType h: #ifndef deckType_h #define deckType_h #include "cardType.h" #include <string> using namespace std; class deckType { public: void shuffle(); cardType dealCard(); deckType(); private: cardType *deck; int current; }; #endif DeckType cpp: #include <iostream> #include "deckType.h" using namespace std; deckType::deckType() { int index = 0; int current=0; deck = new cardType[52]; string suit[] = {"Hearts","Diamonds","Clubs","Spades"}; int value[] = {1,2,3,4,5,6,7,8,9,10,11,12,13}; for ( int i = 0; i <= 3; i++ ) { for ( int j = 1; j <= 13; j++ ) { deck[index] = cardType(suit[i],value[j]); index++; } } } cardType deckType::dealCard() { return deck[current]; current++; } Main cpp : #include "deckType.h" #include <iostream> using namespace std; int main() { deckType gamedeck; cout << "1" <<endl; cardType currentCard; cout << "2" <<endl; currentCard = gamedeck.dealCard(); cout << "3" <<endl; return 0; } I keep getting bad_alloc at the currentCard = gamedeck.dealCard(); I really do not know what i have done wrong.

    Read the article

  • How to add and remove nested model fields dynamically using Haml and Formtastic

    - by Brightbyte8
    We've all seen the brilliant complex forms railscast where Ryan Bates explains how to dynamically add or remove nested objects within the parent object form using Javascript. Has anyone got any ideas about how these methods need to be modified so as to work with Haml Formtastic? To add some context here's a simplified version of the problem I'm currently facing: # Teacher form (which has nested subject forms) [from my application] - semantic_form_for(@teacher) do |form| - form.inputs do = form.input :first_name = form.input :surname = form.input :city = render 'subject_fields', :form => form = link_to_add_fields "Add Subject", form, :subjects # Individual Subject form partial [from my application] - form.fields_for :subjects do |ff| #subject_field = ff.input :name = ff.input :exam = ff.input :level = ff.hidden_field :_destroy = link_to_remove_fields "Remove Subject", ff # Application Helper (straight from Railscasts) def link_to_remove_fields(name, f) f.hidden_field(:_destroy) + link_to_function(name, "remove_fields(this)") end def link_to_add_fields(name, f, association) new_object = f.object.class.reflect_on_association(association).klass.new fields = f.fields_for(association, new_object, :child_index => "new_#{association}") do |builder| render(association.to_s.singularize + "_fields", :f => builder) end link_to_function(name, h("add_fields(this, \"#{association}\", \"#{escape_javascript(fields)} \")")) end #Application.js (straight from Railscasts) function remove_fields(link) { $(link).previous("input[type=hidden]").value = "1"; $(link).up(".fields").hide(); } function add_fields(link, association, content) { var new_id = new Date().getTime(); var regexp = new RegExp("new_" + association, "g") $(link).up().insert({ before: content.replace(regexp, new_id) }); } The problem with implementation seems to be with the javascript methods - the DOM tree of a Formtastic form differs greatly from a regular rails form. I've seen this question asked online a few times but haven't come across an answer yet - now you know that help will be appreciated by more than just me! Jack

    Read the article

  • Django custom managers - how do I return only objects created by the logged-in user?

    - by Tom Tom
    I want to overwrite the custom objects model manager to only return objects a specific user created. Admin users should still return all objects using the objects model manager. Now I have found an approach that could work. They propose to create your own middleware looking like this: #### myproject/middleware/threadlocals.py try: from threading import local except ImportError: # Python 2.3 compatibility from django.utils._threading_local import local _thread_locals = local() def get_current_user(): return getattr(_thread_locals, 'user', None) class ThreadLocals(object): """Middleware that gets various objects from the request object and saves them in thread local storage.""" def process_request(self, request): _thread_locals.user = getattr(request, 'user', None) #### end And in the Custom manager you could call the get_current_user() method to return only objects a specific user created. class UserContactManager(models.Manager): def get_query_set(self): return super(UserContactManager, self).get_query_set().filter(creator=get_current_user()) Is this a good approach to this use-case? Will this work? Or is this like "using a sledgehammer to crack a nut" ? ;-) Just using: Contact.objects.filter(created_by= user) in each view doesn`t look very neat to me. EDIT Do not use this middleware approach !!! use the approach stated by Jack M. below After a while of testing this approach behaved pretty strange and with this approach you mix up a global-state with a current request. Use the approach presented below. It is really easy and no need to hack around with the middleware. create a custom manager in your model with a function that expects the current user or any other user as an input. #in your models.py class HourRecordManager(models.Manager): def for_user(self, user): return self.get_query_set().filter(created_by=user) class HourRecord(models.Model): #Managers objects = HourRecordManager() #in vour view you can call the manager like this and get returned only the objects from the currently logged-in user. hr_set = HourRecord.objects.for_user(request.user)

    Read the article

  • Audio stream mangement in Linux

    - by User1
    I have a very complicated audio setup for a project. Here's what we have: 3 applications playing sound 2 applications recording sound 2 sound cards I really don't really have the code to any of these applications. All I want to do is monitor and control the audio streams. Here are a few examples of operations I'd like to do while the applications are running: Mute one of the incoming audio streams. Have one of the incoming audio streams do a "solo" (be the only stream that can "talk"). Get a graph (about 30 seconds worth) of the audio that each stream produced. Send one of the audio streams to soundcard #1, but all three audio streams to soundcard #2. I would likely switch audio streams every 2 minutes or so with one of the operations listed above. A GUI would be preferred. I started looking at the sound systems in Linux and it gets extremely complex and I feel like there have been many new advances in the past few years. I see jack, pulseaudio, artsd, and several other packages. They all have some promise but where should I start? Is there something someone already built that can help?

    Read the article

  • Rails - Logic for finding info from a :has_many :through needed!

    - by Jty.tan
    I have 3 relevant tables. User, Orders, and Viewables The idea is that each User has got many Orders, but at the same time, each User can View specific other Orders that belong to other Users. So Viewables has the attributes of user_id and order_id. Orders has a :has_many :Users, :through => :viewables Is it possible to do a find through an Order's view? So something like @viewable_orders = Orders.find(:all, :conditions = ["Viewable.user_id=?",1]) To get a list of Orders which are viewable by user_id=1. (This doesn't work, else I won't be asking. :( ) The idea being that I can do something like a sidebar where the current user (the logged-in one) can view a list of other people's orders that he can view. For example Three other Users who have some Orders that he can view should be eventually displayed like this: Jack (2) Basic Order (registry_id: 1) New Order (registry_id: 29) Amy (4) Short Order (registry_id: 12) Jill (5) Hardware Order (14) Pink Order (17) Software Order (76) (The number in brackets are the respective user_id or registry_id) So to find the list of all of the orders that the current user can find (assuming user_id of the current user is 1), would be found by doing @viewable_orders = Viewable.find(:all, :conditions => ["user_id=?", 1]) And that would give me the collection of the above 6 registries. Now, the easiest way to do this, is for me to just have a list of + Jill's Hardware Order + Jill's Pink Order + Amy's Short Order + etc But that gets ugly for long lists. Thanks!

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57  | Next Page >