Search Results

Search found 4151 results on 167 pages for 'cat man do'.

Page 54/167 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• Sending an SMS in Android

  - by D4N14L

  Hey, I have been making an Android app which needs to send a text message. Here is the current code I have: public class getMessage extends Service { @Override public IBinder onBind(Intent intent) { return null; } @Override public void onStart(Intent intent, int startId) { super.onStart(intent, startId); client Phone = new client(); String[] msg = Phone.getMsg(user[0],user[1]); PendingIntent pi = PendingIntent.getActivity(this, 0, new Intent(this, getMessage.class), 0); SmsManager man = SmsManager.getDefault(); Log.e("GOT MESSAGE", msg[0]+ " : " +msg[1]); man.sendTextMessage(msg[0], null, msg[1], pi, null); Log.e("Message", "Sent the message?"); } Now, for some reason, the text message will not send using this code, and I'm not sure why. I was hoping that someone here could help me out in finding why this message won't send. No error is raised, nothing appears in the log (except for the log messages that I make myself in the code). Also, the manifest does have the correct tags. Suggestions?

  Read the article

• Oracle Solaris: Zones on Shared Storage

  - by Jeff Victor

  Oracle Solaris 11.1 has several new features. At oracle.com you can find a detailed list. One of the significant new features, and the most significant new feature releated to Oracle Solaris Zones, is casually called "Zones on Shared Storage" or simply ZOSS (rhymes with "moss"). ZOSS offers much more flexibility because you can store Solaris Zones on shared storage (surprise!) so that you can perform quick and easy migration of a zone from one system to another. This blog entry describes and demonstrates the use of ZOSS. ZOSS provides complete support for a Solaris Zone that is stored on "shared storage." In this case, "shared storage" refers to fiber channel (FC) or iSCSI devices, although there is one lone exception that I will demonstrate soon. The primary intent is to enable you to store a zone on FC or iSCSI storage so that it can be migrated from one host computer to another much more easily and safely than in the past. With this blog entry, I wanted to make it easy for you to try this yourself. I couldn't assume that you have a SAN available - which is a good thing, because neither do I! What could I use, instead? [There he goes, foreshadowing again... -Ed.] Developing this entry reinforced the lesson that the solution to every lab problem is VirtualBox. Oracle VM VirtualBox (its formal name) helps here in a couple of important ways. It offers the ability to easily install multiple copies of Solaris as guests on top of any popular system (Microsoft Windows, MacOS, Solaris, Oracle Linux (and other Linuxes) etc.). It also offers the ability to create a separate virtual disk drive (VDI) that appears as a local hard disk to a guest. This virtual disk can be moved very easily from one guest to another. In other words, you can follow the steps below on a laptop or larger x86 system. Please note that the ability to use ZOSS to store a zone on a local disk is very useful for a lab environment, but not so useful for production. I do not suggest regularly moving disk drives among computers. In the method I describe below, that virtual hard disk will contain the zone that will be migrated among the (virtual) hosts. In production, you would use FC or iSCSI LUNs instead. The zonecfg(1M) man page details the syntax for each of the three types of devices. Why Migrate? Why is the migration of virtual servers important? Some of the most common reasons are: Moving a workload to a different computer so that the original computer can be turned off for extensive maintenance. Moving a workload to a larger system because the workload has outgrown its original system. If the workload runs in an environment (such as a Solaris Zone) that is stored on shared storage, you can restore the service of the workload on an alternate computer if the original computer has failed and will not reboot. You can simplify lifecycle management of a workload by developing it on a laptop, migrating it to a test platform when it's ready, and finally moving it to a production system. Concepts For ZOSS, the important new concept is named "rootzpool". You can read about it in the zonecfg(1M) man page, but here's the short version: it's the backing store (hard disk(s), or LUN(s)) that will be used to make a ZFS zpool - the zpool that will hold the zone. This zpool: contains the zone's Solaris content, i.e. the root file system does not contain any content not related to the zone can only be mounted by one Solaris instance at a time Method Overview Here is a brief list of the steps to create a zone on shared storage and migrate it. The next section shows the commands and output. You will need a host system with an x86 CPU (hopefully at least a couple of CPU cores), at least 2GB of RAM, and at least 25GB of free disk space. (The steps below will not actually use 25GB of disk space, but I don't want to lead you down a path that ends in a big sign that says "Your HDD is full. Good luck!") Configure the zone on both systems, specifying the rootzpool that both will use. The best way is to configure it on one system and then copy the output of "zonecfg export" to the other system to be used as input to zonecfg. This method reduces the chances of pilot error. (It is not necessary to configure the zone on both systems before creating it. You can configure this zone in multiple places, whenever you want, and migrate it to one of those places at any time - as long as those systems all have access to the shared storage.) Install the zone on one system, onto shared storage. Boot the zone. Provide system configuration information to the zone. (In the Real World(tm) you will usually automate this step.) Shutdown the zone. Detach the zone from the original system. Attach the zone to its new "home" system. Boot the zone. The zone can be used normally, and even migrated back, or to a different system. Details The rest of this shows the commands and output. The two hostnames are "sysA" and "sysB". Note that each Solaris guest might use a different device name for the VDI that they share. I used the device names shown below, but you must discover the device name(s) after booting each guest. In a production environment you would also discover the device name first and then configure the zone with that name. Fortunately, you can use the command "zpool import" or "format" to discover the device on the "new" host for the zone. The first steps create the VirtualBox guests and the shared disk drive. I describe the steps here without demonstrating them. Download VirtualBox and install it using a method normal for your host OS. You can read the complete instructions. Create two VirtualBox guests, each to run Solaris 11.1. Each will use its own VDI as its root disk. Install Solaris 11.1 in each guest.Install Solaris 11.1 in each guest. To install a Solaris 11.1 guest, you can either download a pre-built VirtualBox guest, and import it, or install Solaris 11.1 from the "text install" media. If you use the latter method, after booting you will not see a windowing system. To install the GUI and other important things, login and run "pkg install solaris-desktop" and take a break while it installs those important things. Life is usually easier if you install the VirtualBox Guest Additions because then you can copy and paste between the host and guests, etc. You can find the guest additions in the folder matching the version of VirtualBox you are using. You can also read the instructions for installing the guest additions. To create the zone's shared VDI in VirtualBox, you can open the storage configuration for one of the two guests, select the SATA controller, and click on the "Add Hard Disk" icon nearby. Choose "Create New Disk" and specify an appropriate path name for the file that will contain the VDI. The shared VDI must be at least 1.5 GB. Note that the guest must be stopped to do this. Add that VDI to the other guest - using its Storage configuration - so that each can access it while running. The steps start out the same, except that you choose "Choose Existing Disk" instead of "Create New Disk." Because the disk is configured on both of them, VirtualBox prevents you from running both guests at the same time. Identify device names of that VDI, in each of the guests. Solaris chooses the name based on existing devices. The names may be the same, or may be different from each other. This step is shown below as "Step 1." Assumptions In the example shown below, I make these assumptions. The guest that will own the zone at the beginning is named sysA. The guest that will own the zone after the first migration is named sysB. On sysA, the shared disk is named /dev/dsk/c7t2d0 On sysB, the shared disk is named /dev/dsk/c7t3d0 (Finally!) The Steps Step 1) Determine the name of the disk that will move back and forth between the systems. root@sysA:~# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c7t0d0 /pci@0,0/pci8086,2829@d/disk@0,0 1. c7t2d0 /pci@0,0/pci8086,2829@d/disk@2,0 Specify disk (enter its number): ^D Step 2) The first thing to do is partition and label the disk. The magic needed to write an EFI label is not overly complicated. root@sysA:~# format -e c7t2d0 selecting c7t2d0 [disk formatted] FORMAT MENU: ... format fdisk No fdisk table exists. The default partition for the disk is: a 100% "SOLARIS System" partition Type "y" to accept the default partition, otherwise type "n" to edit the partition table. n SELECT ONE OF THE FOLLOWING: ... Enter Selection: 1 ... G=EFI_SYS 0=Exit? f SELECT ONE... ... 6 format label ... Specify Label type[1]: 1 Ready to label disk, continue? y format quit root@sysA:~# ls /dev/dsk/c7t2d0 /dev/dsk/c7t2d0 Step 3) Configure zone1 on sysA. root@sysA:~# zonecfg -z zone1 Use 'create' to begin configuring a new zone. zonecfg:zone1 create create: Using system default template 'SYSdefault' zonecfg:zone1 set zonename=zone1 zonecfg:zone1 set zonepath=/zones/zone1 zonecfg:zone1 add rootzpool zonecfg:zone1:rootzpool add storage dev:dsk/c7t2d0 zonecfg:zone1:rootzpool end zonecfg:zone1 exit root@sysA:~# oot@sysA:~# zonecfg -z zone1 info zonename: zone1 zonepath: /zones/zone1 brand: solaris autoboot: false bootargs: file-mac-profile: pool: limitpriv: scheduling-class: ip-type: exclusive hostid: fs-allowed: anet: ... rootzpool: storage: dev:dsk/c7t2d0 Step 4) Install the zone. This step takes the most time, but you can wander off for a snack or a few laps around the gym - or both! (Just not at the same time...) root@sysA:~# zoneadm -z zone1 install Created zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T163634Z.zone1.install Image: Preparing at /zones/zone1/root. AI Manifest: /tmp/manifest.xml.RXaycg SC Profile: /usr/share/auto_install/sc_profiles/enable_sci.xml Zonename: zone1 Installation: Starting ... Creating IPS image Startup linked: 1/1 done Installing packages from: solaris origin: http://pkg.us.oracle.com/support/ DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 183/183 33556/33556 222.2/222.2 2.8M/s PHASE ITEMS Installing new actions 46825/46825 Updating package state database Done Updating image state Done Creating fast lookup database Done Installation: Succeeded Note: Man pages can be obtained by installing pkg:/system/manual done. Done: Installation completed in 1696.847 seconds. Next Steps: Boot the zone, then log into the zone console (zlogin -C) to complete the configuration process. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T163634Z.zone1.install Step 5) Boot the Zone. root@sysA:~# zoneadm -z zone1 boot Step 6) Login to zone's console to complete the specification of system information. root@sysA:~# zlogin -C zone1 Answer the usual questions and wait for a login prompt. Then you can end the console session with the usual "~." incantation. Step 7) Shutdown the zone so it can be "moved." root@sysA:~# zoneadm -z zone1 shutdown Step 8) Detach the zone so that the original global zone can't use it. root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 installed /zones/zone1 solaris excl root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - zone1_rpool 1.98G 484M 1.51G 23% 1.00x ONLINE - root@sysA:~# zoneadm -z zone1 detach Exported zone zpool: zone1_rpool Step 9) Review the result and shutdown sysA so that sysB can use the shared disk. root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysA:~# init 0 Step 10) Now boot sysB and configure a zone with the parameters shown above in Step 1. (Again, the safest method is to use "zonecfg ... export" on sysA as described in section "Method Overview" above.) The one difference is the name of the rootzpool storage device, which was shown in the list of assumptions, and which you must determine by booting sysB and using the "format" or "zpool import" command. When that is done, you should see the output shown next. (I used the same zonename - "zone1" - in this example, but you can choose any valid zonename you want.) root@sysB:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysB:~# zonecfg -z zone1 info zonename: zone1 zonepath: /zones/zone1 brand: solaris autoboot: false bootargs: file-mac-profile: pool: limitpriv: scheduling-class: ip-type: exclusive hostid: fs-allowed: anet: linkname: net0 ... rootzpool: storage: dev:dsk/c7t3d0 Step 11) Attaching the zone automatically imports the zpool. root@sysB:~# zoneadm -z zone1 attach Imported zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T184034Z.zone1.attach Installing: Using existing zone boot environment Zone BE root dataset: zone1_rpool/rpool/ROOT/solaris Cache: Using /var/pkg/publisher. Updating non-global zone: Linking to image /. Processing linked: 1/1 done Updating non-global zone: Auditing packages. No updates necessary for this image. Updating non-global zone: Zone updated. Result: Attach Succeeded. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T184034Z.zone1.attach root@sysB:~# zoneadm -z zone1 boot root@sysB:~# zlogin zone1 [Connected to zone 'zone1' pts/2] Oracle Corporation SunOS 5.11 11.1 September 2012 Step 12) Now let's migrate the zone back to sysA. Create a file in zone1 so we can verify it exists after we migrate the zone back, then begin migrating it back. root@zone1:~# ls /opt root@zone1:~# touch /opt/fileA root@zone1:~# ls -l /opt/fileA -rw-r--r-- 1 root root 0 Oct 22 14:47 /opt/fileA root@zone1:~# exit logout [Connection to zone 'zone1' pts/2 closed] root@sysB:~# zoneadm -z zone1 shutdown root@sysB:~# zoneadm -z zone1 detach Exported zone zpool: zone1_rpool root@sysB:~# init 0 Step 13) Back on sysA, check the status. Oracle Corporation SunOS 5.11 11.1 September 2012 root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - Step 14) Re-attach the zone back to sysA. root@sysA:~# zoneadm -z zone1 attach Imported zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T190441Z.zone1.attach Installing: Using existing zone boot environment Zone BE root dataset: zone1_rpool/rpool/ROOT/solaris Cache: Using /var/pkg/publisher. Updating non-global zone: Linking to image /. Processing linked: 1/1 done Updating non-global zone: Auditing packages. No updates necessary for this image. Updating non-global zone: Zone updated. Result: Attach Succeeded. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T190441Z.zone1.attach root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - zone1_rpool 1.98G 491M 1.51G 24% 1.00x ONLINE - root@sysA:~# zoneadm -z zone1 boot root@sysA:~# zlogin zone1 [Connected to zone 'zone1' pts/2] Oracle Corporation SunOS 5.11 11.1 September 2012 root@zone1:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 1.98G 538M 1.46G 26% 1.00x ONLINE - Step 15) Check for the file created on sysB, earlier. root@zone1:~# ls -l /opt total 1 -rw-r--r-- 1 root root 0 Oct 22 14:47 fileA Next Steps Here is a brief list of some of the fun things you can try next. Add space to the zone by adding a second storage device to the rootzpool. Make sure that you add it to the configurations of both zones! Create a new zone, specifying two disks in the rootzpool when you first configure the zone. When you install that zone, or clone it from another zone, zoneadm uses those two disks to create a mirrored pool. (Three disks will result in a three-way mirror, etc.) Conclusion Hopefully you have seen the ease with which you can now move Solaris Zones from one system to another.

  Read the article

• Magento - Add CMS Block to One Page

  - by a1anm

  I have this code in a xml layout file: <reference name="left"> <block type="blog/blog" name="left.blog.menu" before="-"> <action method="setTemplate" ifconfig="blog/menu/left"> <template>aw_blog/menu.phtml</template> </action> <block type="blog/tags" name="blog_tags" /> </block> </reference> I want to add a cms static block to the blog pages using this code: <block type="cms/block" name="brand_list"> <action method="setBlockId"><block_id>brand_list</block_id></action> </block> If I add it in directly after this line: <reference name="left"> It works but it is then displayed on every page. How can I get it to show only on the blog pages? Thanks. Edit: Here is the entire xml file: <layout version="0.1.0"> <default> <reference name="footer_links"> <block type="blog/blog" name="add.blog.footer"> <block type="blog/tags" name="blog_tags" /> <action method="addFooterLink" ifconfig="blog/menu/footer"></action> </block> </reference> <reference name="right"> <block type="blog/blog" name="right.blog.menu" before="-"> <action method="setTemplate" ifconfig="blog/menu/right" ifvalue="1"> <template>aw_blog/menu.phtml</template> </action> <block type="blog/tags" name="blog_tags" /> </block> </reference> <reference name="left"> <block type="blog/blog" name="left.blog.menu" before="-"> <action method="setTemplate" ifconfig="blog/menu/left"> <template>aw_blog/menu.phtml</template> </action> <block type="blog/tags" name="blog_tags" /> </block> </reference> <reference name="top.links"> <block type="blog/blog" name="add.blog.link"> <action method="addTopLink" ifconfig="blog/menu/top"></action> <block type="blog/tags" name="blog_tags" /> </block> </reference> <reference name="head"> <action method="addItem"><type>skin_css</type><name>aw_blog/css/style.css</name></action> </reference> </default> <blog_index_index> <reference name="content"> <block type="blog/blog" name="blog" template="aw_blog/blog.phtml"/> </reference> </blog_index_index> <blog_index_list> <reference name="content"> <block type="blog/blog" name="blog" template="aw_blog/blog.phtml"/> </reference> </blog_index_list> <blog_post_view> <reference name="content"> <block type="blog/post" name="post" template="aw_blog/post.phtml"> <block type="socialbookmarking/bookmarks" name="bookmarks" template="bookmarks/bookmarks.phtml"/> </block> </reference> </blog_post_view> <blog_cat_view> <reference name="content"> <block type="blog/cat" name="cat" template="aw_blog/cat.phtml" /> </reference> </blog_cat_view> <blog_rss_index> <block type="blog/rss" output="toHtml" name="rss.blog.new"/> </blog_rss_index> </layout>

  Read the article

• A lot of TCP: time wait bucket table overflow in CentOS 6

  - by divaka

  we have the following output from dmesg: __ratelimit: 33491 callbacks suppressed TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow TCP: time wait bucket table overflow Also we have the following setting: cat /proc/sys/net/ipv4/tcp_max_tw_buckets 524288 We are under some kind of attack, but we could not detect what cause this problem?

  Read the article

• "Attach to native process failed" with Apache 2.0 Agent 2.202 for RHEL5 Linux 64bit

  - by Richard

  In trying to install Apache 2.0 Agent 2.202 for RHEL5 Linux 64bit, the dialogue appears as follows. # export JAVAHOME=/usr/java/jdk1.6.0_24/; echo $JAVAHOME /usr/java/jdk1.6.0_24/ # ./setup Launching installer... Attach to native process failed On the server we have the following JREs and I've tried both. $ sudo rpm -qa | egrep "(openjdk|icedtea)" java-1.6.0-openjdk-1.6.0.0-1.27.1.10.8.el5_8 And SElinux appears to be off: # cat /etc/sysconfig/selinux SELINUX=disabled SELINUXTYPE=targeted

  Read the article

• virsh vcpu_period and vcpu_quota

  - by Programster

  I have been looking into ways to divide my CPU amongst KVM guests other than by just setting vCPU access limits. I understand the concept of cpu_shares which can be set/displayed with virsh schedinfo, but I also found vcpu_period and vcpu_quota listed with this command as shown below: Looking at the man page, I know what the acceptable input values are but could somebody please explain in simple terms what these two parameters actually do?

  Read the article

• How do I bypass pkgadd signature verification?

  - by Brian Knoblauch

  Trying to install CollabNet Subversion Client on Solaris x64, but I'm hung up with: ## Verifying signature for signer <Alexander Thomas(AT)> pkgadd: ERROR: Signature verification failed while verifying certificate <subject=Alexander Thomas(AT), issuer=Alexander Thomas(AT)>:<self signed certificate>. Any way to just bypass the certificate check? None of the options listed in the man page seemed appropriate.

  Read the article

• FreeBSD 8.1 64bit logrotate - ELF interpreter /libexec/ld-elf-so.1 not found

  - by Richard Knop

  I am trying to get logrotate running on a FreeBSD 8.1 virtual machine. I installed the logrotate with pkg_add, I have created the logrotate.config file and also run: mkdir /var/lib/ touch /var/lib/logrotate.status Now when I do: /usr/local/sbin/logrotate -d /usr/local/etc/logrotate.conf I get this error: ELF interpreter /libexec/ld-elf-so.1 not found Abort The file ld-elf-so.1 exists: locate ld-elf.so.1 /libexec/ld-elf.so.1 /usr/libexec/ld-elf.so.1 /usr/share/man/man1/ld-elf.so.1.1.gz

  Read the article

• Ubuntu suddenly freezes

  - by tapan

  I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

  Read the article

• eth0:0 is configured but not listed in ifconfig output

  - by FractalizeR

  Hello. I have the following problem: My server was given two IPs from [b]different[/b] subnets. Now I am trying to configure the system to work properly. I have created [root@server ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) HWADDR=00:30:48:DA:B1:0E DEVICE=eth0 BOOTPROTO=none BROADCAST=79.174.69.255 IPADDR=79.174.69.241 NETMASK=255.255.254.0 NETWORK=79.174.68.0 ONBOOT=yes GATEWAY=79.174.68.1 TYPE=Ethernet [root@server ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0:0 # Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) HWADDR=00:30:48:DA:B1:0E DEVICE=eth0 BOOTPROTO=none BROADCAST=79.174.69.255 IPADDR=79.174.71.74 NETMASK=255.255.255.0 NETWORK=79.174.71.1 ONBOOT=yes GATEWAY=79.174.71.1 TYPE=Ethernet But both after "service network restart" and after "reboot" [root@server ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:30:48:DA:B1:0E inet addr:79.174.71.74 Bcast:79.174.71.255 Mask:255.255.255.0 inet6 addr: fe80::230:48ff:feda:b10e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:910284 errors:0 dropped:0 overruns:0 frame:0 TX packets:2924 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:257964879 (246.0 MiB) TX bytes:232450 (227.0 KiB) Memory:df220000-df240000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:27 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6976 (6.8 KiB) TX bytes:6976 (6.8 KiB) Device eth0:0 is not shown as active. If I try [root@server ~]# ifconfig eth0:0 eth0:0 Link encap:Ethernet HWaddr 00:30:48:DA:B1:0E UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:df220000-df240000 It is shown as up and running, but IP is not assigned to it. Also it is strange, that IP address assigned to eth0:0 in config file is used by eth0. /var/log/messages shows nothing about network configuration errors on either eth0 or eth0:0. system-config-network seem to understand all settings correctly and resaves them ok also. "ifup eth0:0" executes ok, but ifconfig afterwards shows no eth0:0 device after that. What did I do wrong? May be the problem is that IPs are from different subnets?

  Read the article

• Pecl install failed

  - by poru

  Hello, I'm trying to install memcached with pecl but I get every time this error: checking for libmemcached location... configure: error: memcached support requires libmemcached. Use --with-libmemcached-dir= to specify the prefix where libmemcached headers and library are located ERROR: `/tmp/pear/cache/memcached-1.0.1/configure' failed But if I type whereis memcached I get: /usr/bin/memcached /etc/memcached.conf /usr/share/memcached /usr/share/man/man1/memcached.1.gz I'm using a Ubuntu 8.04 server

  Read the article

• Ubuntu/Windows suddenly freezes

  - by tapan

  I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

  Read the article

• DDoS and Heroku

  - by Yuri

  I use Heroku as my hosting solution. So, if some bad man attacks my site with DDoS, what should I do?

  Read the article

• SNMP custom script :: OID not increasing

  - by amprantino

  I try to create a custom SNMP oid. I add the following like to snmpd.conf (and restart service) : pass .1.3.6.1.3.2 /bin/myscript.sh cat myscript.sh #!/bin/sh echo .1.3.6.1.3.2 echo gauge exec 100 snmpwalk -c mycommunity -v2c 10.2.1.4 .1.3.6.1.3.2 SNMPv2-SMI::experimental.2 = Gauge32: 100 Error: OID not increasing: SNMPv2-SMI::experimental.2 >= SNMPv2-SMI::experimental.2 Is snmpwalk expecting anything at the end of the query ? snmpget work with no problem! Thank you

  Read the article

• Allow anonymous upload for Vsftpd?

  - by user15318

  I need a basic FTP server on Linux (CentOS 5.5) without any security measure, since the server and the clients are located on a test LAN, not connected to the rest of the network, which itself uses non-routable IP's behind a NAT firewall with no incoming access to FTP. Some people recommend Vsftpd over PureFTPd or ProFTPd. No matter what I try, I can't get it to allow an anonymous user (ie. logging as "ftp" or "anonymous" and typing any string as password) to upload a file: # yum install vsftpd # mkdir /var/ftp/pub/upload # cat vsftpd.conf listen=YES anonymous_enable=YES local_enable=YES write_enable=YES xferlog_file=YES #anonymous users are restricted (chrooted) to anon_root #directory was created by root, hence owned by root.root anon_root=/var/ftp/pub/incoming anon_upload_enable=YES anon_mkdir_write_enable=YES #chroot_local_user=NO #chroot_list_enable=YES #chroot_list_file=/etc/vsftpd.chroot_list chown_uploads=YES When I log on from a client, here's what I get: 500 OOPS: cannot change directory:/var/ftp/pub/incoming I also tried "# chmod 777 /var/ftp/incoming/", but get the same error. Does someone know how to configure Vsftpd with minimum security? Thank you. Edit: SELinux is disabled and here are the file permissions: # cat /etc/sysconfig/selinux SELINUX=disabled SELINUXTYPE=targeted SETLOCALDEFS=0 # sestatus SELinux status: disabled # getenforce Disabled # grep ftp /etc/passwd ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin # ll /var/ drwxr-xr-x 4 root root 4096 Mar 14 10:53 ftp # ll /var/ftp/ drwxrwxrwx 2 ftp ftp 4096 Mar 14 10:53 incoming drwxr-xr-x 3 ftp ftp 4096 Mar 14 11:29 pub Edit: latest vsftpd.conf: listen=YES local_enable=YES write_enable=YES xferlog_file=YES #anonymous users are restricted (chrooted) to anon_root anonymous_enable=YES anon_root=/var/ftp/pub/incoming anon_upload_enable=YES anon_mkdir_write_enable=YES #500 OOPS: bad bool value in config file for: chown_uploads chown_uploads=YES chown_username=ftp Edit: with trailing space removed from "chown_uploads", err 500 is solved, but anonymous still doesn't work: client> ./ftp server Connected to server. 220 (vsFTPd 2.0.5) Name (server:root): ftp 331 Please specify the password. Password: 500 OOPS: cannot change directory:/var/ftp/pub/incoming Login failed. ftp> bye With user "ftp" listed in /etc/passwd with home directory set to "/var/ftp" and access rights to /var/ftp set to "drwxr-xr-x" and /var/ftp/incoming to "drwxrwxrwx"...could it be due to PAM maybe? I don't find any FTP log file in /var/log to investigate. Edit: Here's a working configuration to let ftp/anonymous connect and upload files to /var/ftp: listen=YES anonymous_enable=YES write_enable=YES anon_upload_enable=YES anon_mkdir_write_enable=YES

  Read the article

• Confusion on networking service start/stop in Ubuntu

  - by Daniel Ball

  I'm preparing to move and took down two of my servers, leaving only one with some essential services running. What I neglected to consider was that one was the DHCP server(which I realized when somebody contacted me saying they couldn't connect. Whups). So because I only have a few hosts on this small network, I opted to just statically configure them for now. One of these is a new Ubuntu 11.04 server, where I have very little experience. I edited /etc/network/interfaces and /etc/hosts to reflect my changes. I ran $sudo /etc/init.d/networking stop *deconfiguring network interfaces ... So yay. Then I try to start, it gives me the mumbo jumbo about using services (why didn't it do that for the stop?) So instead I run ... $sudo service networking start networking stop/waiting Now, to me that says the status of the service is stopped. But when I ping another computer, I get a successful reply. So is it not actually stopped? More importantly, am I doing something wrong? Edit daniel@FOOBAR:~$ sudo service networking status networking stop/waiting daniel@FOOBAR:~$ sudo service networking stop stop: Unknown instance: daniel@FOOBAR:~$ sudo service networking status networking stop/waiting daniel@FOOBAR:~$ sudo service networking start networking stop/waiting daniel@FOOBAR:~$ sudo service networking status networking stop/waiting So you can see why I ran /etc/init.d/networking stop instead. For some reason upstart (that is what "services" is, right?) isn't working with stop. cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 FOOBAR 198.3.9.2 FOOBAR #Added entry July 19 2011 # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # hostname FOOBAR auto eth0 iface eth0 inet static address 198.3.9.2 netmask 255.255.255.0 network 198.3.9.0 broadcast 198.3.9.255 gateway 198.3.9.15 No I didn't save backups, it was just a minor change so I just commented out the old DHCP setting. Edit I set everything back to original settings and set up a DHCP server. "starting" networking does the same thing. I can only assume this is normal, I just don't know WHY. It can't be anything to do with the configuration files, since they've been restored.

  Read the article

• cPanel Virtfs won't umount

  - by JPerkSter

  Anyone have any experience with virtfs on cPanel servers? I can't seem to get them to unmount, as they say they are already unmounted: [root@Server ~]# cat /proc/mounts | grep user /dev/root /home/virtfs/user/lib ext3 rw,errors=continue,data=ordered 0 0 /dev/root /home/virtfs/user/opt ext3 rw,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/lib ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/sbin ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/share ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/bin ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/man ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/X11R6 ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/kerberos ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/libexec ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/bin ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/share ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/Zend ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/IonCube ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/include ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/lib ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/spool ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/lib ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/cpanel ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/run ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/log ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda6 /home/virtfs/user/tmp ext3 rw,nosuid,nodev,noexec,noatime,errors=continue,data=ordered 0 0 /dev/root /home/virtfs/user/bin ext3 rw,errors=continue,data=ordered 0 0 [root@Server ~]# for i in cat /proc/mounts |grep virtfs |grep user |awk '{print$2}'; do umount $i; done umount: /home/virtfs/user/lib: not mounted umount: /home/virtfs/user/opt: not mounted umount: /home/virtfs/user/usr/lib: not mounted umount: /home/virtfs/user/usr/sbin: not mounted umount: /home/virtfs/user/usr/share: not mounted umount: /home/virtfs/user/usr/bin: not mounted umount: /home/virtfs/user/usr/man: not mounted umount: /home/virtfs/user/usr/X11R6: not mounted umount: /home/virtfs/user/usr/kerberos: not mounted umount: /home/virtfs/user/usr/libexec: not mounted umount: /home/virtfs/user/usr/local/bin: not mounted umount: /home/virtfs/user/usr/local/share: not mounted umount: /home/virtfs/user/usr/local/Zend: not mounted umount: /home/virtfs/user/usr/local/IonCube: not mounted umount: /home/virtfs/user/usr/include: not mounted umount: /home/virtfs/user/usr/local/lib: not mounted umount: /home/virtfs/user/var/spool: not mounted umount: /home/virtfs/user/var/lib: not mounted umount: /home/virtfs/user/var/cpanel: not mounted umount: /home/virtfs/user/var/run: not mounted umount: /home/virtfs/user/var/log: not mounted umount: /home/virtfs/user/tmp: not mounted umount: /home/virtfs/user/bin: not mounted umount: /home/virtfs/user/dev: not mounted umount: /home/virtfs/user/proc: not mounted

  Read the article

• Error 80073701 when installing Windows 7 Service Pack 1

  - by Wagner Maestrelli

  I tried to install the Windows 7 Service Pack 1 using Windows Update and I got an error (code 80073701 - unknown error). I tried it again, same thing. Rebooted and tried again, same error. Before I tried to install the SP1 I had installed all the previous updates. I have Windows 7 Ultimate 32-bits. Has anyone gone through the same problem? Any ideas of what might be happening? Thanks! UPDATE: I installed the System Update Readiness Tool. Then, I tried to install the SP1 again, but the installation failed again with the same error. As I thought I was running out of options, I downloaded the SP1 package (500+ MB) and tried to install manually. Before that, I reinstalled the SUR Update. Well, the manual installation of the SP1 failed again. Then I learned about the c:\Windows\Logs\CBS\CheckSUR.log file (thanks Patches!). I checked it out. As I installed the SUR Update multiple times, the older logs are kept in the c:\Windows\Logs\CBS\CheckSUR.persist.log file. In the first time the SUR update was installed there was an error, which is said to have been fixed. In the subsequent logs, no errors were detected. The log with the error: ================================= Checking System Update Readiness. Binary Version 6.1.7600.20593 Package Version 7.0 2010-03-19 09:57 Checking Windows Servicing Packages Checking Package Manifests and Catalogs (f) CBS MUM Corrupt 0x800B0100 servicing\Packages\Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~x86~pt-BR~6.1.7600.16385.mum servicing\Packages\Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~x86~pt-BR~6.1.7600.16385.cat Package manifest cannot be validated by the corresponding catalog (fix) CBS MUM Corrupt CBS File Replaced Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~x86~pt-BR~6.1.7600.16385.mum from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-rtm-client-cab3-x86.cab. (fix) CBS Paired File CBS File also Replaced Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~x86~pt-BR~6.1.7600.16385.cat from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-rtm-client-cab3-x86.cab. Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store Summary: Seconds executed: 224 Found 1 errors Fixed 1 errors CBS MUM Corrupt Total count: 1 Fixed: CBS MUM Corrupt. Total count: 1 Fixed: CBS Paired File. Total count: 1 It seems it has something to do with the Brazilian Portuguese Language Pack, which happens to be my native language. Problem is I can't uninstall the language pack since it is my system default language. And I haven't found any place to download it so I could reinstall it manually. Well, any ideas? Thanks!

  Read the article

• How do I use the awesome window manager?

  - by Jason Baker

  I've installed awesome on my Ubuntu laptop, and I like it. But I feel kind of lost. I don't know any keyboard shortcuts and the man pages aren't really any help (for instance, what does Mod4 mean?). Is there any kind of brief introduction to awesome I can read?

  Read the article

• fcgi php.ini override

  - by Linux Intel

  I'm using cPanel on centos5 64bit installed. PHP handler is : fcgi cat /usr/local/apache/conf/php.conf output is : LoadModule fcgid_module modules/mod_fcgid.so MaxRequestsPerProcess 500 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php5 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php4 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php3 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php2 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .phtml AddHandler fcgid-script .php5 .php4 .php .php3 .php2 .phtml Apache/2.2.22 , PHP 5.2.17 How can i use custom php.ini for a specific account .?

  Read the article

• Getting more helpful tab completion prompts in bash?

  - by Rory McCann

  Let's say I have a directory with a few files in it like this: $ ls file1 file2 file3 And I want to do some tab completion in bash: $ cat file<tab> file1 file2 file3 I remember seeing someone doing tab completion and the shell bolded the next parts, so in this case, it would bold the 1, 2 and 3 of the filename so it'll look like this: file**1** file**2** file**3** which will tell you what you should type in next. I think this was a feature of zsh, but is there any way to get it in bash?

  Read the article

• xterm not wrapping text properly

  - by mulllhausen

  I'm configuring both my gnome-terminal and xterm columns (i still haven't picked which of these I will be using) and I have a couple of issues I would like to fix: the typing area seems to be smaller (fewer columns) than the display area the typed text is not wrapping to the next line when it reaches the end - it just continues back around on the same line, overwriting the prompt (i have set a custom bash prompt with PS1 in case this is relevant) $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.1 (wheezy) Release: 7.1 Codename: wheezy $ echo $TERM xterm $ stty -a [peter@pc ~] $ stty -a speed 38400 baud; rows 52; columns 126; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = M-^?; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke $[peter@mine ~] $ # the column width only goes up to here ------------------------------------------------> the results are identical in both the xterm and in gnome-terminal 3.4.1.1 and as you can see, the output of the stty -a command goes right up to the edge of the screen, while the typing does not go that far. I have found that I can get the desired result by setting the columns to a very large number, eg: $ stty cols 1800 this fixes both problems. Is it the right way to go about solving this problem? Will this "break" any of the output from programs? So far I have tried top and stty -a and these seem OK. more info as requested in the comments i found that if i cat some input into a file then the columns actually strech the full width of the terminal window: [peter@mine applications] $ cat > /tmp/asd aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaasssssssssssssssssssssssssssssssssssssssssssssssssssssssssssqqqqqqqqqqqqqqqq qqqq does this imply that it is actually bash that is restricting the number of columns and not the terminal? if so then how to alter the number of columns in bash?

  Read the article

• How do I make my blu-ray/hd-dvd/dvd drive multi-region?

  - by jammus

  I have a combined dvd/hd-dvd/bd drive on my machine (yeah, I'm very much the big man) which is all great and everything. However, I've got quite a few region 1 DVDs (on import, yeah?) that it won't play. I know I can switch my drive's region but this is limited to 5 times only. Is there a way I can make the drive permanently multi-region or lift this limit, the same way you can with most DVD players?

  Read the article

• Cadaver with Kerberos: 401 Unauthorized

  - by Nicolas Raoul

  How to make Cadaver connect to a WebDAV server that uses Kerberos authentication? Usually cadaver http://localhost:8080/alfresco/webdav works, I can browse files, but on a network with Kerberos I get: Could not open collection: 401 Unauthorized Even though I have logged in with kinit successfully and have a valid ticket. I can see that Kerberos support has been implemented in Cadaver in 2005. Is there a special syntax to use? No info in the man.

  Read the article

• Cannot install passenger with Nginx

  - by Luc

  Hello, I have a rack application that I want to migrate from Ruby 1.8.7 + Apache + passenger to Ruby 1.9.1 + Nginx + passenger. I have made up the following script for a quick install all in one, and it raises an error... Here is the installation script: (basic one with all the steps I need to install everything on a Ubuntu 10.04 Lucid Lynx fresh box) Nginx sources cd /tmp wget http://nginx.org/download/nginx-0.7.66.tar.gz tar xzf nginx-0.7.66.tar.gz cd nginx-0.7.66 openssl required for SSL/TLS sudo apt-get install openssl sudo apt-get install libssl-dev Compilation stuff sudo apt-get zlib1g-dev Ruby interpreter 1.9.1 sudo apt-get install ruby1.9.1 ruby1.9.1-dev rubygems1.9.1 irb1.9.1 ri1.9.1 rdoc1.9.1 build-essential nginx libopenssl-ruby1.9.1 Make sure default ruby uses version 1.9.1 sudo update-alternatives --install /usr/bin/ruby ruby /usr/bin/ruby1.9.1 400 --slave /usr/share/man/man1/ruby.1.gz ruby.1.gz /usr/share/man/man1/ruby1.9.1.1.gz --slave /usr/bin/ri ri /usr/bin/ri1.9.1 --slave /usr/bin/irb irb /usr/bin/irb1.9.1 --slave /usr/bin/rdoc rdoc /usr/bin/rdoc1.9.1 sudo update-alternatives --config ruby Passenger (rake-0.8.7, fastthread-1.0.7, rack-1.1.0, passenger-2.2.14) sudo gem install passenger Activate Passenger in nginx, select option 2 to use nginx sources donwloaded above cd /var/lib/gems/1.9.1/gems/passenger-2.2.14/bin sudo ./passenger-install-nginx-module And this is the error message I got: /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/ContentHandler.c gcc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Wunused-function -Wunused-variable -Wunused-value -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I /tmp/pcre-8.00 -I objs -I src/http -I src/http/modules -I src/mail \ -o objs/addon/nginx/StaticContentHandler.o \ /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c: In function ‘passenger_static_content_handler’: /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c:71: error: ‘ngx_http_request_t’ has no member named ‘zero_in_uri’ make[1]: *** [objs/addon/nginx/StaticContentHandler.o] Error 1 make[1]: Leaving directory `/tmp/nginx-0.7.66' make: *** [build] Error 2 -------------------------------------------- It looks like something went wrong Please read our Users guide for troubleshooting tips: /var/lib/gems/1.9.1/gems/passenger-2.2.14/doc/Users guide Nginx.html I do not understand the reason of this error. Is this a compatibility problem ? Hope you have any clues :) Thanks a lot, Luc

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >