Search Results

Search found 6393 results on 256 pages for 'frame rate'.

Page 54/256 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • Updating Textures on Runtime in OpenSceneGraph

    - by Abhishek Bansal
    I am working on a project in which i am required to capture frames from external device video and render them on openSceneGraph Node. I am also using GLSL shaders. But i dont know how to update textures on runtime. For other uniforms we need to make callbacks but do we also need to make callbacks for samplers in glsl and openSceneGraph ? My code looks like this. All i am getting right now is a black window. osg::ref_ptr<osg::Geometry> pictureQuad = osg::createTexturedQuadGeometry(osg::Vec3(0.0f,0.0f,0.0f), osg::Vec3(_deviceNameToImageFrameMap[deviceName].frame->s(),0.0f,0.0f), osg::Vec3(0.0f,0.0f,_deviceNameToImageFrameMap[deviceName].frame->t()), 0.0f, 1.0f,_deviceNameToImageFrameMap[deviceName].frame->s(), _deviceNameToImageFrameMap[deviceName].frame->t()); //creating texture and setting up parameters for video frame osg::ref_ptr<osg::TextureRectangle> myTex= new osg::TextureRectangle(_deviceNameToImageFrameMap[deviceName].frame.get()); myTex->setFilter(osg::Texture::MIN_FILTER,osg::Texture::LINEAR); myTex->setFilter(osg::Texture::MAG_FILTER,osg::Texture::LINEAR); myTex->setWrap(osg::Texture::WRAP_S, osg::Texture::CLAMP_TO_EDGE); myTex->setWrap(osg::Texture::WRAP_T, osg::Texture::CLAMP_TO_EDGE); _videoSourceNameToNodeMap[sourceName].geode = new osg::Geode(); _videoSourceNameToNodeMap[sourceName].geode->setDataVariance(osg::Object::DYNAMIC); _videoSourceNameToNodeMap[sourceName].geode->addDrawable(pictureQuad.get()); //apply texture to node _videoSourceNameToNodeMap[sourceName].geode->getOrCreateStateSet()->setTextureAttributeAndModes(0, myTex.get(), osg::StateAttribute::ON); _videoSourceNameToNodeMap[sourceName].geode->getOrCreateStateSet()->setMode(GL_DEPTH_TEST, osg::StateAttribute::OFF); _videoSourceNameToNodeMap[sourceName].geode->setDataVariance(osg::Object::DYNAMIC); //Set uniform sampler osg::Uniform* srcFrame = new osg::Uniform( osg::Uniform::SAMPLER_2D, "srcFrame" ); srcFrame->set(0); //Set Uniform Alpha osg::Uniform* alpha = new osg::Uniform( osg::Uniform::FLOAT, "alpha" ); alpha->set(.5f); alpha->setUpdateCallback(new ExampleCallback()); //Enable blending _videoSourceNameToNodeMap[sourceName].geode->getOrCreateStateSet()->setMode( GL_BLEND, osg::StateAttribute::ON); //Adding blend function to node osg::BlendFunc *bf = new osg::BlendFunc(); bf->setFunction(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); _videoSourceNameToNodeMap[sourceName].geode->getOrCreateStateSet()->setAttributeAndModes(bf); //apply shader to quad _videoSourceNameToNodeMap[sourceName].geode->getOrCreateStateSet()->setAttributeAndModes(program, osg::StateAttribute::ON); //add Uniform to shader _videoSourceNameToNodeMap[sourceName].geode->getOrCreateStateSet()->addUniform( srcFrame ); _videoSourceNameToNodeMap[sourceName].geode->getOrCreateStateSet()->addUniform( alpha );

    Read the article

  • not able to select hidden link - selenium

    - by Maddy
    I have to select web link when i mouse hover to particular frame in the webpage, the button(link to next page) will be visible. WebElement mainElement = driver.findElement(By.xpath(<frame xpath >)); Actions builder = new Actions(driver); builder.moveToElement(mainElement); WebElement button1 = driver.findElement(By.xpath("//*[@id='currentSkills']/div[1]/div/a")); builder.moveToElement(button1).click().perform(); I am still unable to select the particular link when i execute, the following error am getting org.openqa.selenium.ElementNotVisibleException: Element is not currently visible and so may not be interacted with (WARNING: The server did not provide any stacktrace information) Command duration or timeout: 131 milliseconds But when i hover mouse pointer to the particular frame during AUT(just to move to particular frame without clicking anything), then test is executing sucessfully. I know this can be handled by JS. But i want to find out is there any solution within selenium webdriver Your help is much appreciated... Thanks Madan

    Read the article

  • Reducing lag when downloading large amount of data from webpage

    - by Mahir
    I am getting data via RSS feeds and displaying each article in a table view cell. Each cell has an image view, set to a default image. If the page has an image, the image is to be replaced with the image from the article. As of now, each cell downloads the source code from the web page, causing the app to lag when I push the view controller and when I try scrolling. Here is what I have in the cellForRowAtIndexPath: method. NSString * storyLink = [[stories objectAtIndex: storyIndex] objectForKey: @"link"]; storyLink = [storyLink stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet]]; NSString *sourceCode = [NSString stringWithContentsOfURL:[NSURL URLWithString:storyLink] encoding:NSUTF8StringEncoding error:&error]; NSString *startPt = @"instant-gallery"; NSString *startPt2 = @"<img src=\""; if ([sourceCode rangeOfString:startPt].length != 0) { //webpage has images // find the first "<img src=...>" tag starting from "instant-gallery" NSString *trimmedSource = [sourceCode substringFromIndex:NSMaxRange([sourceCode rangeOfString:startPt])]; trimmedSource = [trimmedSource substringFromIndex:NSMaxRange([trimmedSource rangeOfString:startPt2])]; trimmedSource = [trimmedSource substringToIndex:[trimmedSource rangeOfString:@"\""].location]; NSURL *url = [NSURL URLWithString:trimmedSource]; NSData *data = [NSData dataWithContentsOfURL:url]; UIImage *image = [UIImage imageWithData:data]; cell.picture.image = image; Someone suggested using NSOperationQueue. Would this way be a good solution? EDIT: - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *MyIdentifier = @"FeedCell"; LMU_LAL_FeedCell *cell = [tableView dequeueReusableCellWithIdentifier:MyIdentifier]; if (cell == nil) { NSArray *nib = [[NSBundle mainBundle] loadNibNamed:@"LMU_LAL_FeedCell" owner:self options:nil]; cell = (LMU_LAL_FeedCell*) [nib objectAtIndex:0]; } int storyIndex = [indexPath indexAtPosition: [indexPath length] - 1]; NSString *untrimmedTitle = [[stories objectAtIndex: storyIndex] objectForKey: @"title"]; cell.title.text = [untrimmedTitle stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceCharacterSet]]; CGSize maximumLabelSize = CGSizeMake(205,9999); CGSize expectedLabelSize = [cell.title.text sizeWithFont:cell.title.font constrainedToSize:maximumLabelSize]; //adjust the label to the the new height. CGRect newFrame = cell.title.frame; newFrame.size.height = expectedLabelSize.height; cell.title.frame = newFrame; //position frame of date label CGRect dateNewFrame = cell.date.frame; dateNewFrame.origin.y = cell.title.frame.origin.y + cell.title.frame.size.height + 1; cell.date.frame = dateNewFrame; cell.date.text = [self formatDateAtIndex:storyIndex]; dispatch_queue_t someQueue = dispatch_queue_create("cell background queue", NULL); dispatch_async(someQueue, ^(void){ NSError *error = nil; NSString * storyLink = [[stories objectAtIndex: storyIndex] objectForKey: @"link"]; storyLink = [storyLink stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet]]; NSString *sourceCode = [NSString stringWithContentsOfURL:[NSURL URLWithString:storyLink] encoding:NSUTF8StringEncoding error:&error]; NSString *startPt = @"instant-gallery"; NSString *startPt2 = @"<img src=\""; if ([sourceCode rangeOfString:startPt].length != 0) { //webpage has images // find the first "<img src=...>" tag starting from "instant-gallery" NSString *trimmedSource = [sourceCode substringFromIndex:NSMaxRange([sourceCode rangeOfString:startPt])]; trimmedSource = [trimmedSource substringFromIndex:NSMaxRange([trimmedSource rangeOfString:startPt2])]; trimmedSource = [trimmedSource substringToIndex:[trimmedSource rangeOfString:@"\""].location]; NSURL *url = [NSURL URLWithString:trimmedSource]; NSData *data = [NSData dataWithContentsOfURL:url]; UIImage *image = [UIImage imageWithData:data]; dispatch_async(dispatch_get_main_queue(), ^(void){ cell.picture.image = image; }); }) //error: expected expression } return cell; //error: expected identifier } //error extraneous closing brace

    Read the article

  • How to drag only one image with SDK Iphone

    - by loka
    Hi! I want to create a little app that takes two images and i want to make only the image over draggable. After research, i found this solution : -(void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event { UITouch *touch = [[ event allTouches] anyObject]; image.alpha = 0.7; if([touch view] == image){ CGPoint location = [touch locationInView:self.view]; image.center = location; } It works but the problem is that the image is draggable from its center and i don't want that. So i found another solution : - (void) touchesBegan:(NSSet*)touches withEvent:(UIEvent*)event { // Retrieve the touch point CGPoint pt = [[touches anyObject] locationInView:self.view]; startLocation = pt; [[self view] bringSubviewToFront:self.view]; } - (void) touchesMoved:(NSSet*)touches withEvent:(UIEvent*)event { // Move relative to the original touch point CGPoint pt = [[touches anyObject] locationInView:self.view]; frame = [self.view frame]; frame.origin.x += pt.x - startLocation.x; frame.origin.y += pt.y - startLocation.y; [self.view setFrame:frame]; } It works very well but when i add another image, all the images of the view are draggable at the same time.I'm a beginner with the iphone programmation and i have no idea of how i can only make the image over draggable. Thank you in advance for your help!!

    Read the article

  • How do I sub sample data by group using ddply?

    - by Maiasaura
    I've got a data frame with far too many rows to be able to do a spatial correlogram. Instead, I want to grab 40 rows for each species and run my correlogram on that subset. I wrote a function to subset a data frame as follows: samp <- function(dataf) { dataf[sample(1:dim(dataf)[1], size=40, replace=FALSE),] } Now I want to apply this function to each species in a larger data frame. When I try something like culled_data = ddply (larger_data, .(species), subset, samp) I get this error: Error in subset.data.frame(piece, ...) : 'subset' must evaluate to logical Anyone got ideas on how to do this?

    Read the article

  • How do I remove an old JPanel and add a new one?

    - by Roman
    I would like to remove an old JPanel from the Window (JFrame) and add a new one. How should I do it? I tried the following: public static void showGUI() { JFrame frame = new JFrame("Colored Trails"); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.add(partnerSelectionPanel); frame.setSize(600,400); frame.setVisible(true); } private static void updateGUI(final int i, final JLabel label, final JPanel partnerSelectionPanel) { SwingUtilities.invokeLater( new Runnable() { public void run() { label.setText(i + " seconds left."); } partnerSelectionPanel.setVisible(false); \\ <------------ } ); } So, my code update the "old" JPanel and them it makes the whole JPanel invisible. It was the idea. But it does not work. The compiler complains about the line indicated with "<------------". It writes: <identifier> expected, illegal start of type.

    Read the article

  • Safari & Frames in html

    - by user575838
    Hi, I am using Windows Expression web to design a embedded quicktime player that plays 4 separate videos in a main frame. Yes, I am using frames. Header Frame, Left Bar frame, Footer & Main centre frame. Everything works in Explorer as it should. See the picture ![Web Frames preview in Explorer, links work, link plays dif videos when clicked.][1] <html> Untitled 1 <div style="position: absolute; width: 100px; height: 100px; z-index: 1" id="layer1"> </div> <p>This page uses frames, but your browser doesn&#39;t support them.</p> </body> </noframes> When I check it in Safari, the video is misaligned in the frame & the background color is black, which I want it white. All the links work, it's just the misalignment & background color. See the picture. ![Safari Preview][2] Firefox also works. Here's the code, page source from the Safari browser. Heres a pic of Safari misalignment. Heres the Safari Code code Please help. It may be simple but I'm a newb. I appreciate any advice from you pro's.

    Read the article

  • jQuery getScript function with frames

    - by user210099
    Hello.. I'm a novice at Javascript/Jquery programming, so an apology if this is a simple/silly question. I am trying to use the jQuery .getScript() function to refresh part of an existing webpage. This webpage must be run on a local file system, and a large amount of the formatting is done using frames. Right now, there’s three main frames- a sidebar which displays possible “scopes” to choose from, a main frame which displays the majority of the contents of the webpage, and a footer frame. The main entry into the page is in an index.html file, which loads a sidebar.html, main.html, and footer.html file into each of the respective frames. In turn, the main.html has a number of javascript files which it loads, the main being a main.js, which contains numerous functions to format/process the contents for this main window. After loading this javascript file, main.html loads a few javascript files, which contain the data which is going to be displayed in the main frame. These files that are loaded have a fixed data structure, and are dependent on the functions that were loaded by the main.js file. Loading the webpage works fine now, but when a user tries to switch to another “scope”, the whole webpage is reloaded to make the switch. The only difference in the webpage is the content in the main.js frame, loaded in by a different set of .js files. Enough text, let’s look at some code. When the webpage loads, I tried to add a simple call to the getScript function in a .js file at the index.html level which handles switching scopes. This file, newFile, has different data definitions than the previously loaded oldFile.js which was loaded in the main.html file. $.getScript(/js/newFile.js); However this doesn’t work, since newFile.js depends on a parseData() function which is in main.js. If I open firebug up, parseData is not located in the dom tab, which I assume is related to some scoping issue with the main.html and main.js file existing in a different frame. I tried to do some targeting to the correct “frame” but I don’t think I understand jQuery enough to know what is happening. $(window.parent.frames[0]).getScript(/js/newFile.js); Any suggestions? If I were to type into firebug console “parseData” it can not find it: “ReferenceError: parseData is not defined” However, if I type in window.parent.frames[1].parseData, it can find the function. Sorry about all the rambling and poor understanding of javascript. Hopefully someone can provide some assistance! Thanks

    Read the article

  • Picture Box and Form Transparency

    - by Qu1nncunxIV
    Maybe I am missing something, but is it the case that when you set a pictureboxes background to transparent, all it really does is set it to the same color as the forms background? What I am trying to do is draw an animation for the benefit of this, a bouncing ball - which I paint on the form, then overlay that with a picture frame. End result should be a bouncing ball in a picture frame, I should mention that the picture frame does not have a straight edge, so it is not possible to arrange 4 picture boxes in a frame. The ball needs to vanish behind the frame to change color and then magically bounce back out. I have tried: 1.Setting the picture box background to pink and then key out the same pink, this basically cuts away everything, including that which is behind the picture box 2.Setting the picture box to transparent, this just displays the picture box background as the same color as the forms background. 3.I have tried painting the image in a rectangle, this had the same effect as drawing it in a picture box. I am not sure what I am doing wrong, I am wondering if there is any other ways I could try or if someone has made a custom control or library that supports transparency?

    Read the article

  • Placing text on UIView in custom location

    - by JAM
    I am trying to calculate a position to place label on the screen. The goal is to place "word" label in lower right corner of the first square block If yellowish square is defined as myView = [[UIView alloc] initWithFrame:CGRectMake(100, 100, 70, 70)]; [self.view addSubview:myView]; [myView setBackgroundColor:[UIColor colorWithHexString:@"FFFFEC"]]; Using it, i'd like to place a label in it's lower right corner l1 = [[UILabel alloc] init]; [l1 setText:@"word"]; [l1 setFrame:CGRectMake(myView.frame.origin.x + myView.frame.size.width, myView.frame.origin.y + myView.frame.size.height, 700, 700)]; [l1 setFont:[UIFont fontWithName:@"Arial" size:10.0]]; [l1 setBackgroundColor:[UIColor colorWithHexString:@"CCFFFEC"]]; [l1 setTextAlignment:UITextAlignmentRight]; [l1 sizeToFit]; This is what happens: The matter here obviously, is in a correct offset. Knowing the font and size of text, how can one correctly calculate it?

    Read the article

  • Command prompt in debug mode for Eclipse? (OpenCV + Eclipse + Win7)

    - by Tony
    I am a beginner for Eclipse. I now have Eclipse C/C++ IDE with OpenCV library running on Windows 7. So far it works after spending hours trying to get it running. But then I realize that Eclipse does not pop up a command prompt as VS2010 does while debugging. And moreover Eclipse's debug mode is just stuck in there and refuse to output anything. But if the code doesn't involve the OpenCV things it works again. Below is the code I use for testing. It captures images from webcam and output it to the screen. The infinite loop (until you press 'q') makes sure it constantly grabs new inputs from the camera. I browsed through the workspace and run the exe just compiled and it worked flawlessly. So I don't think there's anything wrong in the code (it's an example code anyway In brief, can I just pop up a command prompt window in debug mode? And why is Eclipse console stuck when the code involves some OpenCV functions? #include <stdio.h> #include <stdlib.h> #include <tchar.h> #include <cv.h> #include <cxcore.h> #include <highgui.h> #include <iostream> int _tmain(int argc, _TCHAR* argv[]) { CvCapture *capture = 0; IplImage *frame = 0; int key = 0; /* initialize camera */ capture = cvCaptureFromCAM( 0 ); /* always check */ if ( !capture ) { printf("Cannot open initialize webcam!\n"); return 1; } /* create a window for the video */ cvNamedWindow( "result", CV_WINDOW_AUTOSIZE ); while( key != 'q' ) { /* get a frame */ frame = cvQueryFrame( capture ); /* always check */ if( !frame ) break; /* display current frame */ cvShowImage( "result", frame ); /* exit if user press 'q' */ key = cvWaitKey( 1 ); } /* free memory */ cvDestroyWindow( "result" ); cvReleaseCapture( &capture ); return 0; }

    Read the article

  • How to make paging off of vertical direction in WWDC2010 photoScroller.

    - by user357383
    In WWDC2010 sample code "photoScroller", in landscape mode, I want to change image size to 480*751. But there is vertical paging in this mode. In this sample, zooming mode doesn't have vertical paging. So I want to same as this. Please teach me how to fix this sample code. I changed this code as follows. - (CGRect)frameForPagingScrollView { CGRect frame = CGRectMake(0, 0, 480, 751); frame.origin.x -= PADDING; frame.size.width += (2 * PADDING); return frame; } Thank you

    Read the article

  • how to create following Java applicatin? [on hold]

    - by Tushar Bichwe
    Write a JAVA program which performs the following listed operations: A. Create a package named MyEmpPackage which consists of following classes A class named Employee which stores information like the Emp number, first name, middle name, last name, address, designation and salary. The class should also contain appropriate get and set methods. 05 A class named AddEmployeeFrame which displays a frame consisting of appropriate controls to enter the details of a Employee and store these details in the Employee class object. The frame should also have three buttons with the caption as “Add Record” and “Delete Record” and “Exit”. 10 A class named MyCustomListener which should work as a user – defined event listener to handle required events as mentioned in following points. 05 B When the “Add Record” button is clicked, the dialog box should be appeared with asking the user “Do you really want to add record in the file”. If the user selects Yes than the record should be saved in the file. 10 When the “Exit” button is clicked, the frame should be closed. 10 [Note: Use the MyCustomListener class only to handle the appropriate events] C The “Delete Record” button should open a new frame which should take input of delete criteria using a radio button. The radio button should provide facility to delete on basis of first name, middle name or last name. 10 The new frame should also have a text box to input the delete criteria value. 10 The record should be deleted from the file and a message dialog should appear with the message that “Record is successfully Deleted”. 10 [Note: Use the MyCustomListener class only to handle the appropriate events] D Provide proper error messages and perform appropriate exceptions where ever required in all the classes 10

    Read the article

  • How could I represent 1.625 by 0 or a 1 (binary digit)?

    - by pepito
    This is an excerpt from wikipedia about 'full rate' speech coding standard. Full Rate or FR or GSM-FR or GSM 06.10 was the first digital speech coding standard used in the GSM digital mobile phone system. The bit rate of the codec is 13 kbit/s, or 1.625 bits/audio sample. And this one is an excerpt from wikipedia about bit. In computing parlance, bit is the abbreviation for a single binary digit, represented by a 0 or a 1. How could I represent 1.625 by 0 or a 1? Actually, that's my lecturer's question that I could not answer. Some links to papers are more than welcome. Thanks in advance.

    Read the article

  • unable to sniff traffic despite network interface being in monitor or promiscuous mode

    - by user65126
    I'm trying to sniff out my network's wireless traffic but am having issues. I'm able to put the card in monitor mode, but am unable to see any traffic except broadcasts, multicasts and probe/beacon frames. I have two network interfaces on this laptop. One is connected normally to 'linksys' and the other is in monitor mode. The interface in monitor mode is on the right channel. I'm not associated with the access point because, as I understand, I don't need to if using monitor mode (vs promiscuous). When I try to ping the router ip, I'm not seeing that traffic show up in wireshark. Here's my ifconfig settings: daniel@seasonBlack:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1f:29:9e:b2:89 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:112 errors:0 dropped:0 overruns:0 frame:0 TX packets:112 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8518 (8.5 KB) TX bytes:8518 (8.5 KB) wlan0 Link encap:Ethernet HWaddr 00:21:00:34:f7:f4 inet addr:192.168.1.116 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::221:ff:fe34:f7f4/64 Scope:Link UP BROADCAST RUNNING MTU:1500 Metric:1 RX packets:9758 errors:0 dropped:0 overruns:0 frame:0 TX packets:4869 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3291516 (3.2 MB) TX bytes:677386 (677.3 KB) wlan1 Link encap:UNSPEC HWaddr 00-02-72-7B-92-53-33-34-00-00-00-00-00-00-00-00 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:1500 Metric:1 RX packets:112754 errors:0 dropped:0 overruns:0 frame:0 TX packets:101 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:18569124 (18.5 MB) TX bytes:12874 (12.8 KB) wmaster0 Link encap:UNSPEC HWaddr 00-21-00-34-F7-F4-00-00-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wmaster1 Link encap:UNSPEC HWaddr 00-02-72-7B-92-53-00-00-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Here's my iwconfig settings: daniel@seasonBlack:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:F8:D6:17:34 Bit Rate=54 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=68/70 Signal level=-42 dBm Noise level=-69 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 wmaster1 no wireless extensions. wlan1 IEEE 802.11bg Mode:Monitor Frequency:2.437 GHz Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Here's how I know I'm on the right channel: daniel@seasonBlack:~$ iwlist channel lo no frequency information. eth0 no frequency information. wmaster0 no frequency information. wlan0 11 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Current Frequency=2.437 GHz (Channel 6) wmaster1 no frequency information. wlan1 11 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Current Frequency=2.437 GHz (Channel 6)

    Read the article

  • Bonding: works only for download

    - by Crazy_Bash
    I would like to install bonding with 4 links with mode 4. but only "download/receiving" works with bondig. for transmitting the system chooses one link. ifconfig bond0 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 inet addr:ip Bcast:ip Mask:255.255.255.248 inet6 addr: fe80::92e2:baff:fe0f:76b4/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:239187413 errors:0 dropped:10944 overruns:0 frame:0 TX packets:536902370 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14688536197 (13.6 GiB) TX bytes:799521192901 (744.6 GiB) eth2 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:54969488 errors:0 dropped:0 overruns:0 frame:0 TX packets:2537 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3374778591 (3.1 GiB) TX bytes:314290 (306.9 KiB) eth3 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:64935805 errors:0 dropped:1 overruns:0 frame:0 TX packets:2532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3993499746 (3.7 GiB) TX bytes:313968 (306.6 KiB) eth4 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:57352105 errors:0 dropped:2 overruns:0 frame:0 TX packets:536894778 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3524236530 (3.2 GiB) TX bytes:799520265627 (744.6 GiB) eth5 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:61930025 errors:0 dropped:3 overruns:0 frame:0 TX packets:2540 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3796021948 (3.5 GiB) TX bytes:314274 (306.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:62 errors:0 dropped:0 overruns:0 frame:0 TX packets:62 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5320 (5.1 KiB) TX bytes:5320 (5.1 KiB) those are my configs: DEVICE="eth2" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth3" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth4" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth5" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE=bond0 IPADDR=<ip> BROADCAST=<ip> NETWORK=<ip> GATEWAY=<ip> NETMASK=<ip> USERCTL=no BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Aggregator selection policy (ad_select): stable Active Aggregator Info: Aggregator ID: 1 Number of ports: 4 Actor Key: 17 Partner Key: 11 Partner Mac Address: 00:24:51:12:63:00 Slave Interface: eth2 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b4 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b5 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b6 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b7 Aggregator ID: 1 Slave queue ID: 0 /etc/modprobe.d/bonding.conf alias bond0 bonding options bond0 mode=4 miimon=100 updelay=200 #downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 Linux: Linux 3.0.0+ #1 SMP Fri Oct 26 07:55:47 EEST 2012 x86_64 x86_64 x86_64 GNU/Linux what i've tried: downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 mode 6

    Read the article

  • Is there an apache module to slow down site scans?

    - by florin
    I am administering a few web servers. Each night, random hosts from the Internet are probing them for various vulnerabilities in php, phpadmin, horde, mysqladmin, etc. Is there a way (apache plugin?) to slow down the rate of attack? For SSH, I have a rate limiting rule on the firewall, which does not allow more than three connections per minute. But I don't want to rate limit all HTTP access, only the access that returns 404s. Is there such an apache module?

    Read the article

  • Can't connect to samba using openVPN

    - by Arthur
    I'm fairly new to using VPN. For a home project I'm running a OpenVPN server. This server runs within a network 192.168.2.0 and subnet 255.255.255.0 I can connect to this net work using the ip range 5.5.0.0 I guess the subnet is 255.255.255.192, but I'm not really sure about that. When connecting to my VPN network I can access the server via 5.5.0.1 and I can see the samba shares created on that machine. However I'm not allowed to connect to the samba share. When I look at the samba log of the computer which tries to connect I can see these messages: lib/access.c:338(allow_access) Denied connection from 5.5.0.132 (5.5.0.132) These are the share definition in /etc/samba/smb.conf interfaces = 192.168.2.0/32 5.5.0.0/24 security = user # wins-support = no # wins-server = w.x.y.z. // A LOT OF MORE SETTINGS AND COMMENTS hosts allow = 127.0.0.1 192.168.2.0/24 5.5.0.132/24 hosts deny = 0.0.0.0/0 browseable = yes path = [path to share] directory mask = 0755 force create mode = 0755 valid users = [a valid user, which i use to login with] writeable = yes force group = [the group i force to write with] force user = [the user i force to write with] This is the output of the ifconfig command as0t0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.0.1 P-t-P:5.5.0.1 Mask:255.255.255.192 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:200 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) as0t1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.0.65 P-t-P:5.5.0.65 Mask:255.255.255.192 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:200 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) as0t2 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.0.129 P-t-P:5.5.0.129 Mask:255.255.255.192 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:xxxx errors:0 dropped:0 overruns:0 frame:0 TX packets:xxxx errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:200 RX bytes:xxxx (xxxx MB) TX bytes:12403514 (xxxx MB) as0t3 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.0.193 P-t-P:5.5.0.193 Mask:255.255.255.192 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:7041 errors:0 dropped:0 overruns:0 frame:0 TX packets:9797 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:200 RX bytes:xxxx (xxxx KB) TX bytes:xxxx (xxxx MB) eth1 Link encap:Ethernet HWaddr 00:0e:2e:61:78:21 inet addr:192.168.2.100 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: xxxx:xxxx:xxxx:xxxx:7821/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:xxxx errors:0 dropped:0 overruns:0 frame:0 TX packets:xxxx errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:xxxx (xxxx MB) TX bytes:xxxx (xxxx MB) Interrupt:16 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:xxxx errors:0 dropped:0 overruns:0 frame:0 TX packets:xxxx errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:xxxx (xxxx MB) TX bytes:xxxx (xxxx MB) Can anyone tell me what is going wrong? My server is running Ubuntu 12.04 LTS

    Read the article

  • Calculating IOPS for a single HDD - what am I doing wrong?

    - by red888
    So I know there is no standardized way of calculating IOPS for a HDD, but from everything I have read it appears one of the most accurate formulas is the following: IOP/ms = + {rotational latency} + ({block size} / {data transfer rate}) Which is IOs per millisecond or what the book I've been reading calls "Disk Service Time". Also rotational latency is calculated as half of one rotation in milliseconds. This was taken from the EMC book "Information Storage and Management" -arguably a pretty reliable source right\wrong? Putting this formula into practice consider this Seagate data sheet. I am going to calculate IOPS for the ST3000DM001 model for a block size of 4kb: Seek Average (Write) = 9.5 -I'll measuring IOPS for writes Spindle speed = 7200rpm Average Data Rate = 156MB/s So my variables are: Seek Time = 9.5ms Rotational latency = (.5 / (7200rpm / 60)) = 0.004s = 4ms Data Rate = 156MB/s = (0.156MB/ms / 0.004MB) = 39 9.5ms + 4ms + 39 = IO/ms 52.5 1 / (52.5 * 0.001) = 19 IOPS 19 IOPS for this drive clearly is not right so what am I doing wrong?

    Read the article

  • How do I use a custom 503 error page with Nginx?

    - by Michael Gorsuch
    Hi. I have implemented rate limiting with Nginx (which works excellently, by the way) and would like to display a custom 503 error page. I have followed examples on the web without luck. I am running a simple configuration that looks something like this: listen x.x.x.x:80 server_name something.com root /usr/local/www/something.com; error_page 503 /503.html; location / { limit_req zone=default burst=5 nodelay; proxy_pass http://mybackend; } The idea is that our rate limited users would be shown a special page explaining what was going on. The rate limiting is working, but the built-in 503 page is rendering. Any ideas?

    Read the article

  • New 2.5" hard drive for laptop - What to compare?

    - by TFM
    I'm having trouble finding a new (bigger) hard drive for my laptop. I came across some criteria that I never thought about before, while I was checking a price comparison site. Of course, that made me more confused. First of all, I will probably go with something above 250 GB, and at least 16 MB cache. Now the confusing part: Most new drives are 7200 RPM, as opposed to good old 5400 RPM. 7200 RPM used to mean extra heat, but suddenly it's almost impossible to find a 5400 RPM in 2.5". What did I miss? Second question: Internal data transfer rate. My old drive has a rate of around 60 MB, but new drives have values like 100 MB or more (e.g. 150 MB). How important is this "internal data transfer rate"?

    Read the article

  • How do I code this relationship in SQLAlchemy?

    - by Martin Del Vecchio
    I am new to SQLAlchemy (and SQL, for that matter). I can't figure out how to code the idea I have in my head. I am creating a database of performance-test results. A test run consists of a test type and a number (this is class TestRun below) A test suite consists the version string of the software being tested, and one or more TestRun objects (this is class TestSuite below). A test version consists of all test suites with the given version name. Here is my code, as simple as I can make it: from sqlalchemy import * from sqlalchemy.ext.declarative import declarative_base from sqlalchemy.orm import relationship, backref, sessionmaker Base = declarative_base() class TestVersion (Base): __tablename__ = 'versions' id = Column (Integer, primary_key=True) version_name = Column (String) def __init__ (self, version_name): self.version_name = version_name class TestRun (Base): __tablename__ = 'runs' id = Column (Integer, primary_key=True) suite_directory = Column (String, ForeignKey ('suites.directory')) suite = relationship ('TestSuite', backref=backref ('runs', order_by=id)) test_type = Column (String) rate = Column (Integer) def __init__ (self, test_type, rate): self.test_type = test_type self.rate = rate class TestSuite (Base): __tablename__ = 'suites' directory = Column (String, primary_key=True) version_id = Column (Integer, ForeignKey ('versions.id')) version_ref = relationship ('TestVersion', backref=backref ('suites', order_by=directory)) version_name = Column (String) def __init__ (self, directory, version_name): self.directory = directory self.version_name = version_name # Create a v1.0 suite suite1 = TestSuite ('dir1', 'v1.0') suite1.runs.append (TestRun ('test1', 100)) suite1.runs.append (TestRun ('test2', 200)) # Create a another v1.0 suite suite2 = TestSuite ('dir2', 'v1.0') suite2.runs.append (TestRun ('test1', 101)) suite2.runs.append (TestRun ('test2', 201)) # Create another suite suite3 = TestSuite ('dir3', 'v2.0') suite3.runs.append (TestRun ('test1', 102)) suite3.runs.append (TestRun ('test2', 202)) # Create the in-memory database engine = create_engine ('sqlite://') Session = sessionmaker (bind=engine) session = Session() Base.metadata.create_all (engine) # Add the suites in version1 = TestVersion (suite1.version_name) version1.suites.append (suite1) session.add (suite1) version2 = TestVersion (suite2.version_name) version2.suites.append (suite2) session.add (suite2) version3 = TestVersion (suite3.version_name) version3.suites.append (suite3) session.add (suite3) session.commit() # Query the suites for suite in session.query (TestSuite).order_by (TestSuite.directory): print "\nSuite directory %s, version %s has %d test runs:" % (suite.directory, suite.version_name, len (suite.runs)) for run in suite.runs: print " Test '%s', result %d" % (run.test_type, run.rate) # Query the versions for version in session.query (TestVersion).order_by (TestVersion.version_name): print "\nVersion %s has %d test suites:" % (version.version_name, len (version.suites)) for suite in version.suites: print " Suite directory %s, version %s has %d test runs:" % (suite.directory, suite.version_name, len (suite.runs)) for run in suite.runs: print " Test '%s', result %d" % (run.test_type, run.rate) The output of this program: Suite directory dir1, version v1.0 has 2 test runs: Test 'test1', result 100 Test 'test2', result 200 Suite directory dir2, version v1.0 has 2 test runs: Test 'test1', result 101 Test 'test2', result 201 Suite directory dir3, version v2.0 has 2 test runs: Test 'test1', result 102 Test 'test2', result 202 Version v1.0 has 1 test suites: Suite directory dir1, version v1.0 has 2 test runs: Test 'test1', result 100 Test 'test2', result 200 Version v1.0 has 1 test suites: Suite directory dir2, version v1.0 has 2 test runs: Test 'test1', result 101 Test 'test2', result 201 Version v2.0 has 1 test suites: Suite directory dir3, version v2.0 has 2 test runs: Test 'test1', result 102 Test 'test2', result 202 This is not correct, since there are two TestVersion objects with the name 'v1.0'. I hacked my way around this by adding a private list of TestVersion objects, and a function to find a matching one: versions = [] def find_or_create_version (version_name): # Find existing for version in versions: if version.version_name == version_name: return (version) # Create new version = TestVersion (version_name) versions.append (version) return (version) Then I modified my code that adds the records to use it: # Add the suites in version1 = find_or_create_version (suite1.version_name) version1.suites.append (suite1) session.add (suite1) version2 = find_or_create_version (suite2.version_name) version2.suites.append (suite2) session.add (suite2) version3 = find_or_create_version (suite3.version_name) version3.suites.append (suite3) session.add (suite3) Now the output is what I want: Suite directory dir1, version v1.0 has 2 test runs: Test 'test1', result 100 Test 'test2', result 200 Suite directory dir2, version v1.0 has 2 test runs: Test 'test1', result 101 Test 'test2', result 201 Suite directory dir3, version v2.0 has 2 test runs: Test 'test1', result 102 Test 'test2', result 202 Version v1.0 has 2 test suites: Suite directory dir1, version v1.0 has 2 test runs: Test 'test1', result 100 Test 'test2', result 200 Suite directory dir2, version v1.0 has 2 test runs: Test 'test1', result 101 Test 'test2', result 201 Version v2.0 has 1 test suites: Suite directory dir3, version v2.0 has 2 test runs: Test 'test1', result 102 Test 'test2', result 202 This feels wrong to me; it doesn't feel right that I am manually keeping track of the unique version names, and manually adding the suites to the appropriate TestVersion objects. Is this code even close to being correct? And what happens when I'm not building the entire database from scratch, as in this example. If the database already exists, do I have to query the database's TestVersion table to discover the unique version names? Thanks in advance. I know this is a lot of code to wade through, and I appreciate the help.

    Read the article

  • How do I apply different probability factors in an algorithm for a cricket simulation game?

    - by Komal Sharma
    I am trying to write the algorithm for a cricket simulation game which generates runs on each ball between 0 to 6. The run rate or runs generated changes when these factors come into play like skill of the batsman, skill of the bowler, target to be chased. Wickets left. If the batsman is skilled more runs will be generated. There will be a mode of play of the batsman aggressive, normal, defensive. If he plays aggressive chances of getting out will be more. If the chasing target is more the run rate should be more. If the overs are final the run rate should be more. I am using java random number function for this. The code so far I've written is public class Cricket { public static void main(String args[]) { int totalRuns=0; //i is the balls bowled for (int i = 1; i <= 60 ; i++) { int RunsPerBall = (int)(Math.random()*6); //System.out.println(Random); totalRuns=totalRuns+RunsPerBall; } System.out.println(totalRuns); } } Can somebody help me how to apply the factors in the code. I believe probability will be used with this. I am not clear how to apply the probability of the factors stated above in the code.

    Read the article

  • Netbook performs hard shutdown without warning on low battery power

    - by Steve Kroon
    My Asus EEE netbook performs a hard shutdown when it reaches low battery power, without giving any warning - i.e. the power just goes off, without any shutdown process. I can't find anything in the syslog, and no error messages are printed before it happens. I've had this problem on previous (K)Ubuntu versions, and hoped updating to Ubuntu Precise would help resolve the issue, but it hasn't. The option in the Power application for "when power is critically low" is currently blank - the only options are a (grayed-out) hibernate and "Power off". I have re-installed indicator-power to no effect. The time remaining reported by acpi is unstable, as is the time remaining reported by gnome-power-statistics. (For example, running acpi twice in succession, I got 2h16min, and then 3h21min remaining. These sorts of jumps in the remaining time are also in the gnome-power-statistics graphs.) It might be possible to write a script to give me advance warning (as per @RanRag's comment below), but I would prefer to isolate why I don't get a critical battery notification from the system before this happens, so that I can take action as appropriate (suspend/shutdown/plug in power) when I get a notification. Some additional information on the battery: kroon@minia:~$ upower -i /org/freedesktop/UPower/devices/battery_BAT0 native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0A:00/power_supply/BAT0 vendor: ASUS model: 1005P power supply: yes updated: Fri Aug 17 07:31:23 2012 (9 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 33.966 Wh energy-empty: 0 Wh energy-full: 34.9272 Wh energy-full-design: 47.52 Wh energy-rate: 3.7692 W voltage: 12.61 V time to full: 15.3 minutes percentage: 97.248% capacity: 73.5% technology: lithium-ion History (charge): 1345181483 97.248 charging 1345181453 97.155 charging 1345181423 97.062 charging 1345181393 96.970 charging History (rate): 1345181483 3.769 charging 1345181453 3.899 charging 1345181423 4.061 charging 1345181393 4.201 charging kroon@minia:~$ cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: charging present rate: 332 mA remaining capacity: 3149 mAh present voltage: 12612 mV kroon@minia:~$ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 4400 mAh last full capacity: 3209 mAh battery technology: rechargeable design voltage: 10800 mV design capacity warning: 10 mAh design capacity low: 5 mAh cycle count: 0 capacity granularity 1: 44 mAh capacity granularity 2: 44 mAh model number: 1005P serial number: battery type: LION OEM info: ASUS

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >