Search Results

Search found 9551 results on 383 pages for 'office 2003'.

Page 54/383 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• VMWare server host agent service won't start

  - by Bimo Arioseno

  I'm using VMWare Server 2.0 on Windows Server 2003 R2. Sometimes after restarting the host machine, the VMWare host agent service won't start due to an error. This is the error messages from Event Viewer: [Service control manager] Timeout (30000 milliseconds) waiting for the VMware Host Agent service to connect. [Service control manager] The VMware Host Agent service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. I've set the service to automatically restart after subsequent failure using services.msc (using a 10 min. delay), but it still won't start. Only starting the service manually seems to work. Has anyone experienced this before? What workarounds or fixes are there?

  Read the article

• run sfc /scannow as administrator, but I am administrator

  - by Luigi

  On my windows 2003 I have to run sfc /scannow as admin. I have tried to run it as local administrator and domain administrator, but it says I need of administrator privilege ???? I have tried runas /user:administrator cmd and then on a new shell sfc /scannow. But it does not work too. The error message is: You must be an administrator running a console session in order to use the Windows File Checker utility. the error message is in italian and should be translated in english as above. The following is the cmd's screenshot of the error. I am connected as domain administrator but I run it a runas to be local admin.

  Read the article

• NAT: Exposing SQL Server 2008 Express to the internet

  - by Yves

  Hi, I have a Windows Server 2003 SP2 machine with SQL Server 2008 Express installed. I have my network configured with a NAT. Internal clients can access the instance of SQL Server without a problem. I would like to enable SQL Server to be accessible from anywhere on the the internet. I am not sure how to allow my NAT firewall to allow that. I tried adding the port 1443 to it but I still can't access it from a remote machine. How can you make a given SQL Server available to the WAN? Any help would be greatly appreciated. Thank you

  Read the article

• Proliant ML350 Won't Load Windows

  - by Mike

  I have a HP Proliant ML350 G4 running Windows 2003 Server Std Edition that will not load Windows on boot. It gave me a BSOD while running a recent Windows update and has not been able to boot since. The BSOD was a generic error, "Hardware Fault. Contact vendor." I am not getting any errors when the machine boots--it just hangs with a black screen when Windows starts to load. The machine will not boot into safe mode either--it gets stuck after beginning to load drivers. When trying to load the Windows recovery console I get the message that Windows cannot find any hard disks on the machine. This, despite having to load the driver for my storage controller. The HP Smart Start diagnostics finds no problems with my hard disks nor anything else. What should I try next? Mainly, I just want to be able to pull the data off my hard disks.

  Read the article

• Assistance in setting up new APC Smart-UPS RT on a new VMware enviroment

  - by user38085

  I'm new to the realm of setting up a APC Smart-UPS RT 8000VA UPS with a management network card (AP9618). The project calls for the upgrade of the firmware for the network card to the newest and greatest. It also calls for the Powerchute Business Software to be installed with notifications setup per email for temperature, shutdown, and battery low. I know I'll have to use the serial cable to flash the firmware and install the software on one server 2003 box. Also on that server I'll have to install the software and setup the GUI (IP address) interface. Whats confusing the most is the whole process, and steps to use without taking down the network, which would be very bad. In flashing the firmware does it take down the UPS? Do i have to run BOOTP commands to setup the network card? Also no agents will be used on any of the VWware OS's and no SNMP trap will be used.

  Read the article

• IIS application pool failed to respond to ping

  - by Zimmy-DUB-Zongy-Zong-DUBBY

  I have been investigating a problem that occurred on a Windows 2003 server a few days ago. there are about 15 app pools, and within a few minutes, they all produced the error below in the system log: A process serving application pool 'Pool 31x' failed to respond to a ping. The process id was '7144'. The pools were then restarted automatically, but timed out during startup, leaving all sites down. My question is: what would cause a "ping timeout" to all of the app pools around the same time, and then why would they start up too slowly? The app in each pool is a WCMS which uses the .NET 1.1 framework. It connects to a remote DB but is otherwise independent of other machines.

  Read the article

• SBS2003 OWA not displaying images on external side

  - by JasonC

  I've got an SBS 2003 server with companyweb/remote owa site. After authenticating remotely to the https:/servername/remote site, and then clicking on Use Outlook Web Access, the mail/owa site displays only limited amounts of data with Loading... displayed (see first image). This is different when viewing the site on the server itself (see second image). Different browsers will display different types of data (last screenshot is Chrome - first two are IE). I feel IIS permissions on the virtual directories is the cause, but not certain. Forms-based authentication etc is working ok etc. Any suggestions? Authentication and getting email via ActiveSync is not a problem. I don't want to break anything, and it's not a major problem because the users only get their email via outlook and iphones anyway without problems. I'm more interested in finding out for my own info so please give me some suggestions to try. Thanks for looking!

  Read the article

• Setting WMI permissions remotely

  - by christianlinnell

  I've developed a tool that does a simple retrieval of registered services and installed applications from remote Windows Server 2003 servers via WMI. My problem is, the tool needs to be run on an ad hoc basis by a user who is not an administrator of those servers. I've created a domain user (which the tool will use to run the query) that I'd like to grant remote WMI permission on each server, but given there are about 200 servers, I can't do it manually. Is there a way to grant access to that domain user via WMI, or by distributing a registry change via SMS or Group Policy?

  Read the article

• Security permissions for remote shared folders

  - by Tomas Lycken

  I have two servers running Windows Server 2003, and I want copy files from one server (A), programmatically with a windows service running under the Local System account, to a shared folder on the other (B). I keep getting "access denied" errors, and I can't figure out what security settings I need to set to open the shared folder for writing. This is what I've done on the recieving end: On A, right-click on the folder to share, choose the tab "Sharing" and select "Share this folder". Set a share name. Click "Permissions", add the group "Everyone" and give it full control. I tried choosing the "Security" tab to give some permissions there as well, but the "Add" dialog only finds local users, despite the fact that B shows up in the "Workgroup computers" dialog. After further inspection, this is the case also for the "Permissions" dialog under the "Sharing" tab (are they the same?).

  Read the article

• Cannot change port 25 to port 587

  - by Steve

  I am using outlook 2003. My email provider is Cox. Trying to change my out going port to 587 so I send mail while traveling. Others I know on Cox have done this with succes, but they are using newer version of outlook. When I go to change my existing email accounts, outlook will not allow me to change the settings. I can delete 25, but it will not allow me to type in 587. What am I doing wrong?

  Read the article

• IIS6 Indexing Service indexing asp.net codebehind (.aspx.cs) files

  - by Patrick F

  I've setup a few catalogs on an Windows Server 2003 IIS6 install, each tracking files within a website. In the Properties - Generation Dialog for each catalog, 'Index files with unknown extensions' is turned OFF. 'Inherit above settings from Service' in that dialog is also turned off. However, the index is returning results for .cs files, along with abstracts for those files. I've emptied and restarted the catalogs but the files are still appearing. My understanding was the Indexing Service would by default only index HTML, ASCII, and Office Documents. What's going on?

  Read the article

• multiply websites and different websites on the same iis server

  - by Krystian

  I've got this kind of situation: I've got windows 2003 server with dns server on same machine. It is binded to adress for ex. siteA.com Now i want to add to this machine website which name will be siteB.com. I created a new website on IIS6 server with name siteB.com but I dont know how to set up a dns server. My primary DNS administrator created me an alias for my server and he describe it to me like this: 'site siteB.com is an aliase for siteA.com' and then he said that I have to configure my DNS server by my own. I've tried to add new alias in my existing DNS zone (for siteA.com) but it's binding FQDN name like this: siteB.SiteA.com which is wrong as I supose. Can anybody explain me how can I bind this 2 webiste to my server?

  Read the article

• What is causing a vm to exhibit packet loss?

  - by d03boy

  We have a pretty nice piece of hardware set up to run multiple virtual machines in vmware and one of the vm's is an instance of Windows Server 2003 running SQL Server 2005. For some reason we occasionally see 10-20 seconds of straight packet loss to this machine from remote machines (my workstation) as well as other vm's on the same physical hardware. I am using PingPlotter to keep a close eye on the packet loss. So far we've turned off flow control on the NIC but we are already running out of other things to try. What might be causing this and how can I identify the problem? Note: We also have another server with a very similar configuration with the same type of problem to a lesser extent (because its not used as heavily?)

  Read the article

• SMTP server (IIS) is running but can't test it with telnet

  - by NitroxDM

  I have a Windows 2003 web edition server that I can't seem to get the SMTP relay working. BT4 shows port 25 open. When I try use telnet to test it on my desktop I get: Connecting To XXX.XXX.XXX.XXX...Could not open connection to the host, on port 25: Connect failed. From the server I get: Microsoft Telnet> o 127.0.0.1 25 Connecting To 127.0.0.1... Connection to host lost. There isn't anything useful in the logs. Any ideas?

  Read the article

• Multiple VLANs, multiple subnets, single DHCP server?

  - by EightQuarterBit

  Hey guys! At my job we are prepping to transition from multiple LANs connected over slow VPN connections to a single MAN connected over fiber, and I've got a few questions. First of all, we are planning on making each physical site its own VLAN, but we would like to have a single DHCP server at the data center hand out IPs to each VLAN. We've pretty much got the VLAN tagging structure all worked out, but we would like to have our single DHCP server assign different subnets of IPs to each VLAN. For instance, VLAN 2 gets 10.0.2.x through 10.0.4.x, VLAN 3 gets 10.0.5.x through 10.0.7.x etc. We are an Active Directory based shop and we have a Server 2003 box handling DHCP (though we aren't averse to upgrading it to server 2008.) Is this feasible, or am I pipe-dreaming?

  Read the article

• DNS and DHCP not agreeing on an IP address

  - by Mr. Jefferson

  I'm having a problem where our Windows Server 2003 domain controller assigns my Windows 7 computer one IP address (x.x.x.75) via DHCP, but reports another (x.x.x.84) via DNS. This causes some interesting behavior on the network. If I change my adapter settings to get IP and DNS addresses from DHCP, I can access the internet, but no one on our network can access my computer. If I change my IP manually to what DNS says it is, I lose my internet access, but everyone can get to my computer again. I know that we have some old, invalid reverse DNS pointers hanging around (a reverse lookup on an IP address often gives more than one result, usually not including the one that is correct), so that could be contributing, but my problem is recent, and the invalid reverse pointers have been around a long time. What's going on, and how do I fix it?

  Read the article

• What are the best practices for service accounts?

  - by LockeCJ

  We're running several services in our company using a shared domain account. Unfortunately, the credentials for this account are widely distributed and being used frequently for both service and non-service purposes. This has led to a situation where it is possible that the services will be temporarily down due to this shared account being locked. Obviously, this situation needs to change. The plan is to change the services to run under a new account, but I don't think this goes far enough, as that account is subject to the same locking policy. My questions is this: Should we be setting up the service accounts differently than other domain accounts, and if we do, how do we manage those accounts. Please keep in mind that we are running a 2003 domain, and upgrading the domain controller is not a viable solution in the near term.

  Read the article

• Installing ZendServer on IIS6

  - by Wayne M

  I need to run ASP and PHP applications side by side, so I installed ZendServer Community Edition on our existing Server 2003 platform. I specified it to use the existing IIS instance so I don't have to deal with multiple ports (we use ZoneEdit to manage our DNS and they don't seem to allow anything other than port 80 without forwarding). The install went smooth but when I try to configure and manage the install by going to http://localhost/ZendServer (or even just localhost) I get a Bad Request (Invalid Hostname) error. I haven't done anything except install the server, and this is my first time working with ZendServer. How do I fix this so I can get things set up?

  Read the article

• Bind DHCP Server to Network Bridge

  - by Luke

  My wireless router died, so I decided to route everything through my server. So I installed a second NIC and a wireless card to be my new network: 1 NIC to the Modem, 1 NIC to the switch, and the Wireless to... Well, wireless. Anyways, I got far enough to get DHCP to work on just ONE adapter when I used Internet Connection Sharing (I couldn't get RRAS set up for the life of me), then I decided to try bridging the wireless and second NIC. Now, the DHCP server won't bind to the bridge, but I can enter manual IP's in my clients and it'll connect to the Internet. I also tried changing my wireless adapter's IP to 192.168.0.2, and to 192.168.1.1 to try to set up a separate scope, but to no avail. Running Windows Server 2003

  Read the article

• VPN only connects to its server!

  - by Eddie

  Hi guys; Previously I bought a windows 2003 VPS and enabled routing and remote access so that users can make a vpn connection. I turend the firewall off and everything was working fine. But since 2 days ago whenever I try and connect to vpn it connects to vpn without any problem and I can see the connection status however it only connects to the server I mean what I can do with this vpn is to connect to the server via remote desktop and I can ping only the server's IP, neither I can open any webpages in browsers or ping other IP addresses beside the server one! I've also rebuilt the server and configured it for routing access and vpn connection from the beginning but it doesn't work either. It seems that server fails to route the traffic properly, as i'm sure that the firewall has been turned off I can't figure out what's the reason, any idea what's going on? Thanks in advance

  Read the article

• DNS - Redirect from old server to new.

  - by jyoseph

  I have a server, (Server A) Windows Server 2003 that I was hosting some sites on. Now they are hosted on a different server (Server B). I recently switched the DNS at godaddy to point to the new nameservers. Is there something I can do on Server A to point all requests to Server A to Server B (basically a redirect from Server A to B)? What type of record would that be? This is while I'm waiting for the DNS changes I made to fully resolve. edit To further clarify. test.com may still be resolving to Server A, I'd like a DNS record on Server A that tells it to go to the new server. Is that possible?

  Read the article

• Can I issue wireless clients with IP address on different subnet?

  - by Beanz

  We have a very standard setup with a Windows Server 2003 domain controller issuing IP addresses using DHCP. This works fine. Internet access is managed via Microsoft ISA Server 2006 Standard. Clients are required to authenticate and this works fine. We now need to provide wireless internet access to visitors for laptops, iPhones etc. We've bought a couple of Netgear access points so I was thinking we might be able to issue wireless clients connected to it with an IP address on a different subnet and then allow non-authenticated Internet access via the ISA Server for that IP range. Does that sound plausible? I'm not even sure if I can issue a different subnet to wireless clients.

  Read the article

• Always a path to the internet even in Windows SBS is off

  - by Mark

  Hello all, is it possible to have a configuration in a Windows 2003 SBS environment where in the event that the SBS box crashed/turned off/ or is being worked on that there can still exist a path to the internet for domain users and visitors to still use? I would like to have the standalone router issue DHCP IPs. The primary DNS would point to the SBS, the secondary wouuld point to the ISP DNS Server. My theory was that if someone was using the internet and the SBS box went down they wouldn't be able to access the network shares but still be able to use the internet. (We are moving everything into the clouds with Google Apps Non-Profit) Does this seem like a reasonable configuration? Or are they're pitfalls that I will fall into? Thanks Mark

  Read the article

• Server IP Address['s]

  - by Abdul

  hi there i am running server 2003, and seem to have this problem where the server starts kicking out users after a while, especially when they log off, they cant log back in, or the printers on the metwork stop connecting and they cant print to it. when i check the server, i notice that the server has 2 IP addresses, even though it has a static IP, it seems to pick up another IP address as well, but when you go into teh IPV set up, its not there, but of you run the IP scan utility tool, it picks it up. to correct this, i either can log off the server, then log back in, and the IP disappears, or sometimes this doesnt work, and i need to restart the server, but thsi happens like every 2 days or so.....can anyone out there help?

  Read the article

• Exchange server not serving mobile devices - how to troubleshoot?

  - by chickeninabiscuit

  Our exchange server has suddenly stopped serving mobile devices. Attempts to connect result in our ActiveSync server returning HTTP 500. It is serving outlook clients fine. Our server is Windows 2003 SBS 6.5 SP2 There are no abnormal events in the system log. I ran the "Exchange ActiveSync with AutoDiscover" at https://www.testexchangeconnectivity.com/ I've notice an abnormality in the exchange properties, Log File Directory shows: Access denied. Facility: Win32 ID no: 80070005 Exchange System Manager As shown in the following image: I think it may be related to a recent issue we had here: http://serverfault.com/questions/40222/windows-server-2003-suddenly-unable-to-connect-to-anything We followed a procedure to reinstall TCP/IP: http://support.microsoft.com/kb/325356 I've run the "exchange activesync" connectivity test at testexchangeconnectivity.com: Attempting to Resolve the host name mail.immersive.com.au in DNS. Host successfully Resolved Additional Details IP(s) returned: 221.133.203.229 Testing TCP Port 443 on host mail.immersive.com.au to ensure it is listening/open. The port was opened successfully. Testing SSL Certificate for validity. The certificate passed all validation requirements. Test Steps Validating certificate name Successfully validated the certificate name Additional Details Found hostname mail.immersive.com.au in Certificate Subject Common name Validating certificate trust for Windows Mobile Devices Certificate is trusted and all certificates are present in chain Additional Details Certificate is trusted for Windows Mobile 5 and Later platforms. Root = [email protected], CN=Thawte Server CA, OU=Certification Services Division, O=Thawte Consulting cc, L=Cape Town, S=Western Cape, C=ZA Testing certificate date to ensure validity Date Validation passed. The certificate is not expired. Additional Details Certificate is valid: NotBefore = 1/5/2009 4:00:00 PM, NotAfter = 1/11/2010 3:59:59 PM Testing Http Authentication Methods for URL https://mail.immersive.com.au/Microsoft-Server-Activesync/ Http Authentication Methods are correct Additional Details Found all expected authentication methods and no disallowed methods. Methods Found: Basic Attempting an Activesync session with server Errors were encountered while testing the ActiveSync session Test Steps Attempting to send OPTIONS command to server OPTIONS response was successfully received and is valid Additional Details Headers received: MicrosoftOfficeWebServer: 5.0_Pub Pragma: no-cache Public: OPTIONS, POST Allow: OPTIONS, POST MS-Server-ActiveSync: 6.5.7638.1 MS-ASProtocolVersions: 1.0,2.0,2.1,2.5 MS-ASProtocolCommands: Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Notify,Ping Content-Length: 0 Date: Thu, 16 Jul 2009 01:07:27 GMT Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET Attempting FolderSync command on ActiveSync session FolderSync command test failed Tell me more about this issue and how to resolve it Additional Details Exchange

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >