Search Results

Search found 2353 results on 95 pages for 'serial communications'.

Page 54/95 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• MSA20 RAID5 recovery failure due to URE on another disk

  - by Andrey

  I have MSA20 with one disk array on 12 disks and 3 LUNs on it (each raid 5). A few days ago one disk in one of the LUNs was failed and I replaced it. But raid5 recovering failed at 13% and I see in ADU report that one of the disk has "Errors Logged = 5566" and according SCSI specifications it is URE (Sense Code=0x11, Qualifier=0x00). In serial log I also see URE error. It seems that Raid5 can't be rebuilt because of this. So I have a few questions: Is there a way to recover raid5 still? If I leave new disk that was replaced and remove disk with URE, will other LUNs be destroyed or just failed LUN? If all LUNs will fail what is the sense to make each LUN with own raid on one disk group array if 2 failed disk can destroy all? As I understand the preferred way is to create one disk array for one LUN in future and not one array with few LUNs? Thanks.

  Read the article

• Cisco 877 as PPPoA/PPPoE bridge (no routing) - how to make it listen to IP for management?

  - by Ingmar Hupp

  I have a Cisco 877 configured to bridge ADSL with PPPoA to PPPoE on Vlan1. This works fine, but in this mode the only way I can configure the Cisco is via the serial console. I'd like to have the Cisco also listen on an IP address so I can telnet/ssh into it. I think the right way to go about this would be via bridge irb, but I'm not sure exactly how (or if that's even the right direction). IOS is 12.4T and my current config (cut down to essentials) is: no ip routing no ip cef ! ! interface ATM0 no ip address no ip route-cache no atm ilmi-keepalive pvc 0/38 encapsulation aal5snap ! dsl operating-mode auto bridge-group 1 ! ! interface Vlan1 no ip address no ip route-cache bridge-group 1 Just setting an IP address on Vlan1 didn't have the desired effect, but surely this must be possible somehow (the Draytek Vigor 120 even does it by default).

  Read the article

• Need help connecting to SRW2024 Linksys Switch from CentOS 5.4

  - by sxanness

  I am configured a Linksys SRW2024, I accidently changed the management VLAN before changing the VLAN configuration thus I can no longer access it with the net. The only way I have read to get into it now is via a console cable, my laptop with me is a MacBook Pro with no Serial port connection, apart from driving around a town that I am unfamilar with to find an adapter I thought I would try on a Linux box. I have a CentOS 5.4 server here (PowerEdge R300) that I am trying to use to talk to the switch. I tried minicom first but I do not see the console. Another site suggested the screen command. I tried "screen /dev/ttyS0 38400" but all I get is blinking curser, I do not see the configuration. I don't know if anyone here as any tips but I hope someone does. Thank You,

  Read the article

• ARM Debian (squeeze) USB driver with mismatch 3.3.3 kernel but /lib/modules/2.6.36

  - by frank

  Hei guys, my sheevaplug embedded server works fine, but when I wanted to use USB, the device gets not attached to /dev/tty/USB0 lsusb shows correctly: Bus 001 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port an modprobe usbserial raises: FATAL: Could not load /lib/modules/3.3.3/modules.dep: No such file or directory in the /lib/modules/ Folder there is instead a 2.6.36-Folder uname -r gives 3.3.3 How can I overcome this mismatch? Can I create a symlink? I can't flash this embedded device since it is deployed somewhere, only ssh? Please advise!

  Read the article

• A design for watching IPTV anywhere in the house?

  - by Carlos

  I'm currently getting TV and internet via IP to my house. The service comes into an ISP-supplied Router (ST585) which is in turn connected to an IPTV box. I need to replace the router, as it's port forwarding seems to be broken, so I was thinking of getting a box with an IGMP proxy. I once mistakenly got a non-IGMP box, with the result that the internet worked, but the IPTV didn't. The trouble is, I have no idea how to set up the IPTV part of the installation. I do have a copy of the ST585 configuration, but it doesn't look anything like the Cisco stuff that I learned about at CCNA. What are the steps necessary to reproduce the IGMP setup? I was thinking of WireSharking the communications on the network, but I suppose I'd need a hub for that? As a bonus, since the packets are coming in with the TV signal, is it possible to mess with the IGMP setup so I can watch TV anywhere in the house?

  Read the article

• A design for watching IPTV anywhere in the house?

  - by Carlos

  I'm currently getting TV and internet via IP to my house. The service comes into an ISP-supplied Router (ST585) which is in turn connected to an IPTV box. I need to replace the router, as it's port forwarding seems to be broken, so I was thinking of getting a box with an IGMP proxy. I once mistakenly got a non-IGMP box, with the result that the internet worked, but the IPTV didn't. The trouble is, I have no idea how to set up the IPTV part of the installation. I do have a copy of the ST585 configuration, but it doesn't look anything like the Cisco stuff that I learned about at CCNA. What are the steps necessary to reproduce the IGMP setup? I was thinking of WireSharking the communications on the network, but I suppose I'd need a hub for that? As a bonus, since the packets are coming in with the TV signal, is it possible to mess with the IGMP setup so I can watch TV anywhere in the house?

  Read the article

• DICOM Image viewer for Windows

  - by Alin Purcaru

  In case you were wondering DICOM (Digital Imaging and Communications in Medicine) is a set of standards in medical imaging. I have a CT result saved conforming to that standard and I want to be able to see the scans. The directory structure looks like this: 123456 (folder) |- 2342345 (file) |- 2342346 (file) |- 2342347 (file) |- [...] (more files) DICOMDIR (file) A Google search showed a lot of results for DICOM viewer and I even tried one but it only shows the thumbnails of the images. Could anyone recommend a good viewer so I don't have to try them all? Maybe with export functionality. Thank you, Alin

  Read the article

• What if a computer with Ethernet

  - by George Nixon

  I'm just revising for an exam on Networks and Data Communications, and there's one thing I don't get about CSMA/CD and Ethernet. It's supposed to be fairly stable, for instance if a computer drops out of the network, it's not a problem like it might be in a token ring network (I think). But Ethernet works by all the other computers waiting for the currently transmitting computer to finish what it's doing, and then the others use CMSA/CD to determine who goes next. What if one computer malfunctioned and kept sending a continuous stream of data in an infinite loop? In fact, is there a standard time for pcs to transmit before they yield to others?

  Read the article

• DEBIAN-likes to detect the keyboard layout

  - by blietaer

  I would like to find out the current keyboard layout of a debian-like OS. env-var? /etc/? locales? Context: __ Playing around with RFID reader in serial, using python to output to console through uinput/ The thing is, doing the conversion from fake-rfid-keyboard-codes to code sent to uinput/, I would better know if I am using a QWERTY or an AZERTY ('a' becoming 'q', etc...) Back here in Belgium, especially during the event I am working on we are highly susceptible to have both keyboard layouts, I have to support both 'on-the-fly' __ Thanx !

  Read the article

• Security and encryption with OpenVPN

  - by Chris Tenet

  The UK government is trying to implement man-in-the-middle attack systems in order to capture header data in all packets. They are also equipping the "black boxes" they will use with technology to see encrypted data (see the Communications Data Bill). I use a VPN to increase my privacy. It uses OpenVPN, which in turn uses the OpenSSL libraries for encrypting data. Will the government be able to see all the data going through the VPN connection? Note: the VPN server is located in Sweden, if that makes a difference.

  Read the article

• Providing high availability and failover using MySQL on EC2

  - by crb

  I would like to have a highly-available MySQL system, with automatic failover, running on Amazon EC2 instances. The standard approach to solving this is problem Heartbeat + DRBD, but I've found a lot of posts suggesting DRBD doesn't work on EC2, though none saying exactly why. Obviously, a serial heartbeat or distinct network is out of the question in the virtualised environment. It would also be good to have the different servers be in different availability zones, but we're getting into a much harder problem there. What are peoples' opinion on having a high uptime solution in "the cloud"? Note: This question was asked before RDS with multi-AZ was announced, which is the nice automatic answer for today's modern IT professional. :)

  Read the article

• Why are email transfers between mail servers often not encrypted? Why aren't users warned about it?

  - by AmV

  Users can often choose if they want to access their email provider (such as Gmail) using a secure channel (e.g. using HTTPS). However, to the best of my knowledge, when it comes to mail-server-to-mail-server communications, most emails are still transferred in plain text and not encrypted, making it possible to anybody on the network to read their content. Are there any technologies that give the user some guarantees that his emails are sent securely from end to end ? Why not let the user know when encryption is not supported and let him choose if he wants his email to be still delivered ?

  Read the article

• Copy large files to multiple machines on a LAN

  - by Jonathan Callen

  I have a few large files that I need to copy from one Linux machine to about 20 other Linux machines, all on the same LAN as quickly as is feasible. What tools/methods would be best for copying these files, noting that this is not going to be a one-time copy. These machines will never be connected to the Internet, and security is not an issue. Update: The reason for my asking this is because (as I understand it) we are currently using scp in serial to copy the files to each of the machines and I have been informed that this is "too slow" and a faster alternative is being sought. According to what I have been told, attempting to parallelize the scp calls simply slows it down further due to hard drive seeks.

  Read the article

• virsh console and tty size

  - by pehrs

  I have a virtualization server to which I connect over ssh. If I now change the size of the window it will automatically propagate to the server. It's most easily seen using stty -a, checking the columns and row values. I then use virsh console to connect to the serial interface on a KVM based virtual machine. When I now change the size of the window it does not propagate to the virtual server. This is most easily seen by checking stty -a, which is not updated on the virtual machine when I change window size. This means that line breaks does not work correctly in the terminal and any application that relies on window size for formatting (emacs, man, etc) gets messed up unless the window size on the client matches the default size on the server. A workaround is to manually set the window size to match the client window using stty, but I wonder if there is any way to get this information to propagate and set the window size in the virtual machine automatically.

  Read the article

• kernel warning disk error for command write - solaris svm

  - by help_me

  Recently this warning came up on my message logs, scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0): Oct 27 00:14:44 Error for Command: write(10) Error Level:Retryable Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Requested Block: 101515828 Error Block: 101515828 Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Number: 0441B9B5H Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Sense Key: Hardware Error Oct 27 00:14:44 scsi: [ID 107833 kern.notice] ASC: 0x19 (defect list error), ASCQ: 0x0, FRU: 0x2 This is showing signs of disk failing in my opinion. I have not seen the messages re-occurring. This is on a Solaris 9 Sparc system V240. The disks are managed by SVM and "metadb" is showing the flags as "a" Are there any tests or indications as to check/see if the disk is actually failing or was that error message initiated by something else. Thank you!

  Read the article

• How to analyze a wifi network with many devices

  - by Caveatrob

  My friend has a wifi network with an x-box, a wii, a playstation, and two nintendo portables. She's also got 2-3 PC's and a network printer. She's got a wifi repeater as well. She claims that she didn't have any issues for months with everything working together, and suddenly everything stopped disconnecting. I haven't been over there yet - wanted to figure out the best way to diagnose the thing. I asked her to send me the stats on the booster and the modem, etc: The booster is Netgear serial #2ac2195506b95 The modem is Cisco Linksys e1500 #10910c12129103 We have a sprint router thru centurylink and they said it is working fine 660 series

  Read the article

• Windows 7 blocks network access to network-installed apps

  - by VokinLoksar

  Windows 2008 R2 domain. Users, running Windows 7 Enterprise, are trying to run some software from a network share. Specifically, I've tested this with MATLAB and PuTTY. When starting, MATLAB has to contact a licensing server to get its license. This action fails for regular users when they start MATLAB from the network share. However, if they copy the installation directory to a local disk everything works fine. Running MATLAB as an admin user from the network share also works. Same story with PuTTY. If the executable is launched from the share, regular users cannot connect to any servers. Something is blocking network communications for programs that are launched from a network drive. Here's the only other mention I could find of the same problem: https://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/4504b192-0bc0-4402-8e00-a936ea7e6dff It's not the Windows firewall or the IE security settings. Does anyone have any clue as to what this is?

  Read the article

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have alot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• solaris + EMC + power-path

  - by yael

  please advice - when I run powercf command on my Solaris machine , which changes this command do on the EMC storage , or on Solaris file system ? from maanual page: DESCRIPTION During system boot on Solaris hosts, the powercf utility configures PowerPath devices by scanning the HBAs for both single-ported and multiported storage system logical dev- ices. (A multiported logical device shows up on two or more HBAs with the same storage system subsystem/device identity. The identity comes from the serial number for the logical device.) For each storage system logical device found in the scan of the HBAs, powercf creates a corresponding emcpower device entry in the emcp.conf file, and it saves a primary path and an alternate primary path to that device.

  Read the article

• NAT : understanding about interconnection

  - by PITCHY

  English version below J'ai 2 routeurs A et B relié en série avec les ip respectives ( 10.0.0.1/30 10.0.0.2/30) sur le routeur A j'ai activé la fonction NAT avec un pool (200.0.0.1 - 200.0.0.15/28). Lorsque je sors je prends donc un ip du pool par exemple 200.0.0.10. Comment ça fonctionne sachant que ma nouvelle ip (200.0.0.10) ne se trouve pas sur le meme réseau que mon interface de destination (10.0.0.2)? English: I have 2 routers A and B, interconnected with a serial connection, with the ip's 10.0.0.1/30 for A and 10.0.0.2/30 for B. On router A NAT was activated with the pool 200.0.0.1 - 200.0.0.15/28. When connection to this router, I get an ip from the pool, for example 200.0.0.10. Knowing my new ip is 200.0.0.10, which is not on the same network as my destination interface (10.0.0.2), how can this work?

  Read the article

• How can I connect to some old Sun servers?

  - by hellsgate

  We have some old Sun servers (V125, V210, V240, T2000 amongst others) sitting unused and I've been asked to find out if there is anything useful on them before they get wiped and disposed of. However, I've been unable to connect to any of the servers. I tried connecting the servers to a router using the Net Management, Serial Management and standard Ethernet ports. When doing this, I ran 'nmap -sP' from my Linux desktop before and after connecting a server so I could compare the two outputs and hopefully work out what IP address had been assigned to the server, but it didn't appear to have received one. Unfortunately only one of the servers has a VGA output. I was able to access this machine as we still have the login details stored in KeePass, but I've no idea at the moment on how I should go about connecting to any of the others. Any suggestions?

  Read the article

• How to filter Varnish logs based on XID?

  - by Martijn Heemels

  I'm running into infrequent 503 errors which appear hard to pinpoint. Varnishlog is driving me mad, since I can't seem to get the information I want out of it. I'd like to see both the client- and backend-communications as seen by Varnish. I thought the XID number, which is logged on Varnish's default error page, would allow me to filter the exact request out of the logging buffer. However, no combination of varnishlog parameters gives me the output I need. The following only shows the client-side communication: varnishlog -d -c -m ReqStart:1427305652 while this only shows the resulting backend communication: varnishlog -d -b -m TxHeader:1427305652 Is there a one-liner to show the entire request?

  Read the article

• Domain controller in cloud, how do we set up local BDC

  - by brian b

  We have a domain controller (exchange box) hosted at our hosting provider. We need to set up a local domain controller so we do a VPN and local authentication tasks. I can make the PDC accept all connections from our Office IP. How do I get the office router to correctly allow two way communications between the PDC (cloud) and the local DC. Is there a list of ports I need to pass through to the local DC? Thanks! "PDC" and "BDC" used for clarity--I know that the concept is obsolete.

  Read the article

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have a lot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• aireplay - reading but not sending

  - by oneat

  I'm trying aircrack injection, everything is working I authenticated, but aireplay is not working aireplay-ng -3 -b 00:12:2A:01:74:05 -h 78:e4:00:87:71:8b mon0 18:53:03 Waiting for beacon frame (BSSID: 00:12:2A:01:74:05) on channel 7 Saving ARP requests in replay_arp-0817-185303.cap You should also start airodump-ng to capture replies. Read 4988 packets (0 ARPs, 4 ACKs), sent 0 packets...(0 pps) Why isn't it working? Why isn't it sending packets? 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) I tested injection on injection test in aircrack tutorial, despite driver wasn't patched.

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >