Search Results

Search found 2329 results on 94 pages for 'sudden shutdown'.

Page 54/94 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• Why my widows 8 pc always powered on by moving mouse?

  - by Shinbo

  I recently installed windows 8 RTM, but found a very annoying thing. My PC always powered on automatically even in midnight. Eventually I noticed that I can power on the PC by pressing keyboard or mouse, and even moving mouse. After searched this in google, I turned off Sleep and Hibernate in Power Options - System Settings - Shutdown settings, but it still did not work. Would anyone please help me? I don't want to suffer from the noise of PC powering on in midnight any more. Thank a lot.

  Read the article

• Firewall blocks FTP PASV response

  - by harper

  0 down vote favorite I have an FTP server that supports passive server mode (using PASV command). This works fine with Windows XP. When I want to access this server from Windows Vista or Windows 7 with firewall enabled I experience a immediate connection shutdown. A reset packet is sent to the server, the socket is signaled that the server had reset the connection (what is not true). The problem disappears when the firewall is disabled. Connections to other FTP servers work correctly. The difference is that the servers response to PASV does not enclose the address field with parentheses. This is legal as documented in RFC-959 and RFC-1132. How can I configure the firewall to stop this bad behavior?

  Read the article

• Server Problems

  - by nardone25

  Hello everyone in serverfault. I am having a big issue right now and I hope you guys can help. Well I got a call at 7:15am today stating that person can't log in. Then my cell phone start to ring like crazy. So when I got in the server room my ac wasn't working. It was 100 dgrees Luckly I have two UPS that will shutdown my lefthands and servers when it get 95. I am running two left-hand sans, I have two servers machines running VMware ESX. Here is my problem, I booted the server back up when the room was at 68 and only administrator and two IT techs can log on to any desktop. I do get an permissions error from who every logs on. What should I do?

  Read the article

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

  Read the article

• Which Message Queue should I choose (must run on Linux)

  - by MHS

  There are many open source Message queues for Linux, and I need some help deciding what I should go for. My problem is simple - I get sent a list of files that needs to be processed. Each job can't be split up, but they are self contained and can be spread to multiple computers. I'm thinking of solving this using a message queue. Multiple clients send a message to a central queue. Each queue has a number of subscribers that will take jobs from that queue when they have finished processing the current job. Ideally it should have the following qualities Message queue must be able to store unprocessed messages in case of a shutdown/reboot A job can only be processed by a single subscriber (don't want duplicate jobs) The subscribers should be able to send jobs of their own, that will be processed by a different set of subscribers. Can anyone suggest a simple to use message queue?

  Read the article

• mini linux for browsing media playing

  - by Martin Beckett

  I'm looking for a small linux install (<100Mb) that can just run a browser and ideally a media player. It's to fit in a spare recovery partition on my laptop and be a quick boot for non-work stuff when I'm on the road. I have used Puppy-linux and DSL before but they have lots of stuff I don't need. Is there something like these that just concentrates on running a browser in the way xbmc does for videos? ps. The size requirement was to fit in the existing 100Mb win7 recovery partition, but that can be resized. The main idea was something that booted very quickly without the 10min wait while windows does all the corporate stuff and realizes it isn't on the LAN - and could be shutdown instantly.

  Read the article

• Keyboard lights sometimes stay on after PC is powered off. Why?

  - by Vilx-

  Sometimes when I power off my PC some lights on the keyboard stay on. It's pretty random which ones, though I suspect it has something to do with what lights were on just before the shutdown (if I vigorously follow that they are all off while the PC is shutting down then they stay off). Not that this would change anything, but it is annoying. Why does this happen and how can I avoid it? Added: I know that I can turn off the power completely to my computer and it will go off. That's not the point. Actually, I even want my keyboard to have power, because I use it to turn on my computer (the power button on the case is difficult to reach). I just want the lights to go off. Or at least understand why this happens. Oh, and it's a PS2 keyboard.

  Read the article

• Cannot access files after trying to upgrade Ubuntu

  - by Ola

  I tried to upgrade Ubuntu from 11.10 to 12.04. I left it for 24 hours but the upgrade did not complete. Hence I cancelled the upgrade. I thought I will copy all the files that I have to a DVD/CD and try try downloading a copy of Ubuntu. But now, I cannot open any file or copy them. I cannot even shutdown my laptop. I have many important files on my laptop. Can someone help me retrieve my files from my laptop? Regards Ola

  Read the article

• Accessing my Rails webrick behind proxy?

  - by Eki Eqbal

  In my mackbook, when I try to connect to my rails application in office I can't , in the office there are some http proxy , and when I run my rails like this : sudo rails s -p8080 => Booting WEBrick => Rails 3.0.5 application starting in development on http://0.0.0.0:8080 => Call with -d to detach => Ctrl-C to shutdown server [2012-03-20 12:49:34] INFO WEBrick 1.3.1 [2012-03-20 12:49:34] INFO ruby 1.8.7 (2010-01-10) [universal-darwin11.0] [2012-03-20 12:49:34] INFO WEBrick::HTTPServer#start: pid=17439 port=8080 The local IP is : en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether f8:1e:df:d8:8c:25 inet6 fe80::fa1e:dfff:fed8:8c25%en1 prefixlen 64 scopeid 0x5 inet 10.21.21.240 netmask 0xffffff00 broadcast 10.21.21.255 media: autoselect status: active so when I try in the browser to trigger localhost:8080 or 10.21.21.240:8080 , it seems that I can't trigger my application as for the proxy check out the following : Any Ideas ?

  Read the article

• xorg DPMS off: keep VT from turning screen back on

  - by Metiu

  I have an embedded board with a small UPS. When AC power goes down, I need to turn off all power hungry devices in order to have a clean shutdown. First thing I do, is set DPMS to force powerdown, then go through the usual SIGTERM/SIGKILL/umount sequence. I have an Intel i915 Display adapter connected to an LVDS LCD panel. Unfortunately, when Xorg dies, Xserver or the VT code turn the LCD panel back on. I even tried working around it by directly poking the panel enable register in the Display chip, so that X doesn't know about it, but the panel goes back on when the VT comes back. Is there any "legal" way of keeping the display off? Thank you

  Read the article

• How to make PuTTY X11 forwarding work in a screen session?

  - by Alex Howell

  I'm using PuTTY with X11 forwarding enabled, using Xming as my X server on Windows 7. When I SSH to a Linux host, X11 forwarding works fine. If I start a "screen" screen manager session, it still works fine. If I disconnect from the screen session, then later resume in a different PuTTY window using "screen -rd", X11 forwarding doesn't work any more - I get an error: xterm X connection to localhost:11.0 broken (explicit kill or server shutdown). This seems to be because $DISPLAY is different in each PuTTY SSH session (localhost:11.0 in the first session, then localhost:12.0 in the next, and so on). If I manually set $DISPLAY to localhost:12.0 in the screen session, X11 forwarding works again. Is there a way to automatically set $DISPLAY in the screen session, each time it's resumed, so that it always matches the parent PuTTY session's?

  Read the article

• apache tomcat loadbalancing clustering on ubuntu

  - by user740010

  i am facing a problem in clustering the tomcat with apache as a loadbalancer using mod_jk on ubuntu. i have install apache2 on my ubuntu 11.04 and i have downloaded tomcat7 created two copies and kept them at two different location. 1st one is at /home/net4u/vishal/test/tomcatA 2nd one is at /home/net4u/vishal/test1/tomcatB i have made following changes to server.xml file in /conf folder 1. <Server port="8205" shutdown="SHUTDOWN"> 2. <Connector port="8280" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> 3.<Connector port="8209" protocol="AJP/1.3" redirectPort="8443" /> <Engine name="Catalina" defaultHost="localhost" jvmRoute="tomcatB"> 4. <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> similarly i have modified other tomcat i.e tomcatA server.xml content of the server.xml is as follow: -- <!--The connectors can use a shared executor, you can define one or more named thread pools--> <!-- <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="150" minSpareThreads="4"/> --> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 --> <Connector port="8280" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <!-- A "Connector" using the shared thread pool--> <!-- <Connector executor="tomcatThreadPool" port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" /> --> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8109" protocol="AJP/1.3" redirectPort="8443" /> <!-- An Engine represents the entry point (within Catalina) that processes every request. The Engine implementation for Tomcat stand alone analyzes the HTTP headers included with the request, and passes them on to the appropriate Host (virtual host). Documentation at /docs/config/engine.html --> <!-- You should set jvmRoute to support load-balancing via AJP ie : <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1"> --> <Engine name="Catalina" defaultHost="localhost" jvmRoute="tomcatB"> <!--For clustering, please take a look at documentation at: /docs/cluster-howto.html (simple how to) /docs/config/cluster.html (reference documentation) --> <!-- uncomment for clustering--> <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> <!-- Use the LockOutRealm to prevent attempts to guess user passwords via a brute-force attack --> <Realm className="org.apache.catalina.realm.LockOutRealm"> <!-- This Realm uses the UserDatabase configured in the global JNDI resources under the key "UserDatabase". Any edits that are performed against this UserDatabase are immediately available for use by the Realm. --> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> </Realm> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true"> <!-- SingleSignOn valve, share authentication between web applications Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Access log processes all example. Documentation at: /docs/config/valve.html Note: The pattern used is equivalent to using pattern="common" --> <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="%h %l %u %t &quot;%r&quot; %s %b" resolveHosts="false"/> </Host> </Engine> i have install libapache2-mod-jk step 1. i have Created jk.load file in /etc/apache2/mods-enabled/jk.load content is as follows: LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so Create /etc/apache2/mods-enabled/jk.conf: JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/jk.log JkMount /ecommerce/* worker1 JkMount /images/* worker1 JkMount /content/* worker1 step 2. Created workers.properties file in /etc/apache2/workers.properties content is as follows: workers.tomcat_home=/home/vishal/Desktop/test/tomcatA workers.java_home=/usr/lib/jvm/default-java ps=/ worker.list=tomcatA,tomcatB,loadbalancer   worker.tomcatA.port=8109 worker.tomcatA.host=localhost worker.tomcatA.type=ajp13 worker.tomcatA.lbfactor=1   worker.tomcatB.port=8209 worker.tomcatB.host=localhost worker.tomcatB.type=ajp13 worker.tomcatB.lbfactor=1 worker.loadbalancer.type=lb worker.loadbalancer.balanced_workers=tomcatA,tomcatB worker.loadbalancer.sticky_session=1 i tried the same thing on the windows machine it is working.

  Read the article

• MacBook: Can't boot into Linux partition after installation.

  - by Otto

  Hello I just installed Ubuntu. I created a partition in MacOSx using Disk utility, then deleted the partition and installed Ubuntu on the free space created. After the installation, Ubuntu said it would reboot. I hang on shutdown (which is normal, as google told me), so I used the power button to turn the MacBook off. Now I want to boot into Ubuntu. Pressing option/alt on startup only shows me the MacOSx and Windows partition. Also, the Linux partition isn't showing up on my MacOSx desktop. And in Disk Utility, I can see 3 grayed out partitions: "disk0s4", "disk0s5" and "Linux Swap". What can I do to boot into Ubuntu without losing my other partitions? Thank you for your help.

  Read the article

• apache generating to many rotatelogs.exe on Windows?

  - by Patrick

  I'm seeing some odd behavior with Apache's rotatelogs.exe. On one of my servers I'm seeing multiple rotatelogs.exe counting into the 100's. Normally I usually only see 6 which I can rationalize to the 3 logs I have rotating. Does anyone know why this might be happening and how I can prevent it from happening. When the rotatelogs.exe processes get up into the 100's everything slows down and Apache is effectively shutdown because it can't process requests anymore. We are using the following line in our httpd.conf file: ErrorLog "|\"C:/Program Files/Apache2/bin/rotatelogs.exe\" \"C:/Program Files/Apache2/logs/error_log.%Y-%m-%d-%H_%M_%S\" 20M" Thanks in advance for the help!

  Read the article

• Fujitsu siemens V6535 - crash when going standby ?

  - by marc

  Welcome, I trouble with my laptop fujitsu siemens model V6535. My siemens work under Windows 7, and from upgrade time (vista to 7) notice something what make me really angry. When my siemens go to standby mode (when i don't use it for some time), power diode change to red and start blinking (standbay mode). When i push power button (wake up it), blinking diode change to green but nothing else happend (nothing on display, no sound of HDD). When i press power button few second and try turn it on again... it wont display anything... i have unplug charger and then shutdown and power on again without power cable. Then he start working... Few days ago i done upgrade bios to nevest version... but it don't help... Anyone have idea what can be wrong ?

  Read the article

• Keyboard mapping issue in Virtualbox on Mac OS

  - by stanleyxu2005

  I run Windows 7 as a VM in VirtualBox on my MacBook Air (using OS X 10.7). If I do not shutdown the VM but save its machine state. The keyboard will behave strangely after resuming. It seems the Windows Logo key is always hold. When I type the key 'u', the Control Panel will be shown. I tested on a real Windows 7, the same dialog will be shown when I press Win-key and 'u'. When I type the key 'e', the Explorer will show up, some as press Win-key and 'e' on a real Windows 7. If I click 'Restart' from the Start menu of Windows 7, after restarting the VM, the keyboard works again. I think there are some conflicts with keyboard driver in VM. It is quite annoying, usually I usually close a VM by saving its machine state, not shut the OS down. Is there any way to solve this problem?

  Read the article

• Preparing Automatic Repair appears out of nowhere & takes forever?

  - by Jörg B.

  I shutdown my work machine (Windows 8.1 Pro) without any errors appearing (and without installing any new software and especially no new drivers the last couple days) yesterday evening, turned it on this morning and it automatically started into 'Preparing Automatic Repair' mode. 1st of - is there any way to get more information WHY this is appearing out of the blue and.. 2ndly, how long is this usually supposed to take? This is a rather beefy machine (Intel 3770k / 4 core 3.9ghz, Intel SSDs only and 32 gb of ram) but this screen has been 'loading' for almost 1.5 hours now. Is there any sort of debug/verbose mode that would give me ANY indication what's going on?

  Read the article

• RAID Read/Write Speed Gradually Slows

  - by Nalandial

  This is actually a server at home, but I felt it was sufficiently complicated as to not have it on SuperUser and could easily apply to a professional situation. I have a file server running Debian (Lenny 5.0.4), and it has an XFS LVM on top of a RAID 5 with the OS drive separate from the RAID. It's also running apache, samba, and postgresql. Side note: before anyone asks, I'm using RAID5 because I get more bang for the buck on raw drive space, and still have some fault tolerance. When the box is started (via shutdown or reboot) reading/writing to it's samba share maxes out the gigabit network connection. Over time, this slowly degrades eventually becoming < 10MB/s; however, when rebooted the speed returns to maxing out the connection. Why is this happening, and is there a way to 'clear' out whatever's causing it without taking the server down? Thanks in advance!

  Read the article

• CISCO 2911 Router configuration

  - by bala

  Device cisco 2911 router configuration support is required please. I have exchange server 2010 configured and working without any errors the problem is in cisco router configuration when exchange server sends emails out the receives WAN IP not the public ip. I have configured RDNS lookups with our MX record IP addesses that match the FQDN but all our emails are rejected because it does not match with the public ip. Receiving mails problem is not an problem all mails are coming through. i am sure i am missing something on the router configuration that does not sends the public ip, can any one help me to solve this issue. Note; I've got 1 WAN IP & 8 Public IP from ISP . Find below the running configuration. Building configuration... Current configuration : 2734 bytes ! ! Last configuration change at 06:32:13 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 version 15.1 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BSBG-LL ! boot-start-marker boot-end-marker ! ! enable secret 5 $x$xHrxxxxx5ox0 enable password 7 xx23xx5FxxE1xx044 ! no aaa new-model ! no ipv6 cef ip source-route ip cef ! ! ! ! ! ip flow-cache timeout active 1 ip domain name yourdomain.com ip name-server 213.42.20.20 ip name-server 195.229.241.222 multilink bundle-name authenticated ! ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO2911/K9 ! ! username bsbg ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.0.9 255.255.255.0 ip flow ingress ip nat inside ip virtual-reassembly in duplex auto speed 100 no cdp enable ! interface GigabitEthernet0/1 ip address 213.42.xx.x2 255.255.255.252 ip nat outside ip virtual-reassembly in duplex auto speed auto no cdp enable ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 120 interface GigabitEthernet0/1 overload ip nat inside source static tcp 192.168.0.4 25 94.56.89.100 25 extendable ip nat inside source static tcp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static udp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static tcp 192.168.0.4 110 94.56.89.100 110 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.100 443 extendable ip nat inside source static tcp 192.168.0.4 587 94.56.89.100 587 extendable ip nat inside source static tcp 192.168.0.4 995 94.56.89.100 995 extendable ip nat inside source static tcp 192.168.0.4 3389 94.56.89.100 3389 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.101 443 extendable ip nat inside source static tcp 192.168.0.12 80 94.56.89.102 80 extendable ip nat inside source static tcp 192.168.0.12 443 94.56.89.102 443 extendable ip nat inside source static tcp 192.168.0.12 3389 94.56.89.102 3389 extendable ip route 0.0.0.0 0.0.0.0 213.42.69.41 ! access-list 120 permit ip 192.168.0.0 0.0.0.255 any ! ! ! control-plane ! ! ! line con 0 exec-timeout 5 0 line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 password 7 xx64xxD530D26086Dxx login transport input all ! scheduler allocate 20000 1000 end

  Read the article

• Hibernate a user account when switching to different account in Windows 7 Home Premium (64bit)

  - by Sukotto

  Is there any way to have Windows 7 hibernate Bob's account when switched to Mary's account and vice versa? I.e.: Bob is logged in Bob clicks Start shutdown switch user Bob's session is saved to disk Mary logs in Mary's session is restored as it was when Bob's turn started Both are heavy users (30+ chrome tabs open, multiple documents, multiple spreadsheets, music playing, etc) I would like to set up the system so that each gets the full use of the computer while still having all their open apps the way they left them. I suppose I could try setting up a VM for each, but I'd rather not add anything else to the mix here if I don't have to. This is Windows 7 Home Premium 64-bit running on a Lenovo G550 laptop

  Read the article

• AuthInfoRequired cups overwrites

  - by mooscape

  My problem is basically identical to the following: http://bbs.archlinux.org/viewtopic.php?id=61826 Put simply, I have a machine in ubuntu trying to connect to another ubuntu machine via a network in order to use the printer attached. There is no problem printing until I restart the guest machine. Immediately it overwrites the printers.conf file (under /etc/cups/printers.conf). It always adds the same line: AuthInfoRequired username,password I stop cups and change it to *#*AuthInfoRequired username,password to comment out the command. Start cups. Works great 'til the next shutdown. Then it gets overwritten again. Googling indicates it may be GTK problem and not CUPS, but I have found no permanent solution to date. Any suggestions appreciated ....

  Read the article

• Windows 7 won't restart with SSD

  - by JL

  I have this annoying problem that I just can't seem to fix. Recently I upgraded my main boot drive to an OCZ Vertex Turbo (60GB) which is an SSD. I've installed Windows 7 64bit. The drive works, and is really quick... blah blah blah. My problem is when I do a restart, for example click start, then arrow next to shutdown, and restart. The computer will shut down, and do a warm reboot, but it gets stuck where it says loading Windows. Just before the animation starts. So what I have to do is physically press the reset switch on the computer, then it restarts, firing up a menu which offers to launch Windows Startup Repair, so I select "Start Windows Normally". After this I boot in normally, but its damn annoying. Any ideas why this is happening, what I can do to fix it?

  Read the article

• SqlServer2005 Enterprise Fast Recovery, SqlAgent Availability, and Replication

  - by automatic

  I have a database under SqlServer2005 Enterprise 64bit sp3, that is in phase 3 of 3 of recovery after a reboot without normal shutdown. It looks like with fast Recovery, the database became available when recovery moved into phase 3. However, it seems (based on message in SqlAgent log), that SqlAgent is "started" but not available to run jobs until recovery completes. I have other databases on the same server that are transactional publications. It seems to me that if I let users update the published databases, transactions will start to build up in the log, but won't be moved to the distribution database or onto the subscribers because SqlAgent isn't running jobs. Should I be overly concerned about performing updates before

  Read the article

• Starting Redmine at boot using upstart on Ubuntu

  - by joekr

  So after installing redmine from the repositories on Ubuntu 12.04, i've tried to create an upstart script (see below) so it would start up at boot time. While service redmine start does start redmine, it does not start automatically when booting. Also when i run service redmine stop it does stop redmine but simply hangs until i press ctrl+c Also, after stopping starting it again does not work (Also just hangs). From all the upstart examples and tutorials i have seen this should work, so i guess i'm overlooking something. Any hints ? #Redmine description "Redmine" start on started networking stop on stopping networking stop on starting shutdown console output expect daemon exec ruby /usr/share/redmine/script/server webrick -e production -b 188.40.184.155 -p 3000 -d respawn EDIT: Fixed "typo"

  Read the article

• SQL Server Agents jobs and turning off the server

  - by Tim Joseph

  I'm really new to SQL Agent jobs, but I am attempting to build up a maintainance regime for a server that will be turned off and on again at unknown intervals. It may run without being shutdown for a month, or it might only be turned on 9-5... we don't know and the client can't tell us because they don't know. So what I'm wondering is, what do I need to do to get SQL Server to run monthly and daily jobs either when they are due, or if the due date is missed, get them to be run when the server is next powered on. I could come up with a mish-mash of periodic jobs and 'on-power-up' jobs, but if there is something more elegant that would be wonderful. Obviously I'll need to ensure the SQL Server Agent is configure to start when the computer is powered up, but what else?

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >