Search Results

Search found 2329 results on 94 pages for 'sudden shutdown'.

Page 55/94 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

• Laptop burned after heavy OpenGL usage. Is there hope?

  - by leladax

  After programming for OpenGL and a 'slow OS' case for a couple of minutes the screen went blank. I shut it down with forcing it with the shutdown key and now there's no led at all with battery or AC, it doesn't start at all, it's totally dead. It's most certainly not the AC adapter since that didn't show at first, it doesn't start a led at all and if the AC is connected it does a very slight and faint clicking noise (one has to have his ear next to it to hear it, near the AC connector). Is there any hope? I suppose it's a burned motherboard. I suspected a burned GPU but that would still leave the leds at least lid or at least attempting to start up. Now it's totally dead. It's a TOSHIBA satellite x200-219. It has no warranty, as it's more than 2 years since purchase.

  Read the article

• Raspberry Pi stuck at splash screen

  - by Matthew

  I have a raspberry pi and I am stuck at the splash screen. In the top right of the screen there is an image of a Raspberry. When I first power on the device, I get the colored screen, and then I get the image of the raspberry followed by a white cursor which quickly freezes or disappears. I put on the debian version of wheezy that allows java. (the soft float version) Any assistance would be greatly appreciated. BTW I did have it working at one point in time and all I did was go to the terminal (logged out of the GUI) and did a shutdown -h now command. But since then I've even started with a brand new version of the image and it is still not working. Oh and I did try the same SD card with a version of arch linux and it worked fine.

  Read the article

• IIS 7 AppPool logs an error after recycle due to inactivity

  - by ddysart

  We have Windows 2008 RS Server running IIS hosting an ASP.NET site. This morning there was a weird sequence. First a notice that the AppPool was being recycled due to inactivity: "A worker process with process id of '6896' serving application pool 'xxxx' was shutdown due to inactivity. Application Pool timeout configuration was set to 20 minutes. A new worker process will be started when needed." This makes sense and jibes with out timeout settings, but 30 seconds later we see: "A process serving application pool 'xxxx' terminated unexpectedly. The process id was '6896'. The process exit code was '0xc0000005'." I found an older KB article that explains a condition where this might happend on IIS6 due to permission issues, but am curious what might cause this on IIS7.5, especially since we are not seeing it regularly.

  Read the article

• How to set CHKDSK for drive C: in Windows 7

  - by prashanth

  I recently got a 0xc000007b error whenever I tried to run some application software. I found that CHKDSK for C drive might be a solution. When I tried to do it from C drive properties, it said the drive was in use and asked to schedule CHKDSK at the next reboot. I clicked OK. When I restart, I experience a BSOD. I waited for 10 minutes but still nothing happens. So I forced a shutdown (laptop) and again booted up the computer and got a BSOD for just 5 or 10 seconds and system boots and works with no problem. I repeated all these steps four or four times and yet with the same results. Is there any other way other than CHKDSK to solve the 0xc000007b error? If not, why is CHKDSK not working at boot up? Can I force CHKDSK on drive C: to perform while the system is on? Platform: Windows 7 64-bit.

  Read the article

• Put a Windows computer to sleep remotely (from a Linux box)

  - by snark

  I'd like to have my Linux box (a QNAP TS-210 NAS) send the order to go to sleep (or hibernation) to my main Windows 7 computer. As the NAS is running Linux, I can't use psshutdown from SysInternals' PsTools. Is there any Linux equivalent? Or some "magic packet" that can order the Win7 computer to sleep. I know I could install a SSH daemon and trigger a shutdown command from the Linux box using ssh, but ideally I do not want to install anything on the Win7 computer. I can install Linux software on the NAS, no problem about this. PHP, python and perl are also available on it.

  Read the article

• Roaming profile location not updating

  - by Greg

  We have roaming profiles enabled for some users. We want to move some of them over to a new network share. We have copied the files to the location (using Windows backup so that permissions are retained) and we've changed the location in active directory (see screenshot 1). When the user logs in to windows 8 their documents folders still points to the old server (server names removed from the picture but you can see the path is different). The user has logged off and logged back on, and has also run GP update (followed by a shutdown/restart) What do I need to do to make Windows 8 recognise the change?

  Read the article

• Hyper-v error starting vm after reboot

  - by mamu

  Hi rebooted hyper-v host running server 2008 r2. After reboot one of my vm is throwing following error. 'The version does not support this version of file format' Out of my all vms this was only set to save state when shutdown. I tried deleting state and start still same error. Tried inspect disk as well edit disk both throw same error when try to open this. What could it be? any way to resolve it?

  Read the article

• Logout trouble with alternative shells (Win7 Home Premium x64)

  - by M. Cain

  I've tried bb4win and Litestep, and every time I need to log out for some reason (shutdown and all included), the system hangs and the spinning icon next to the "Logging out" text stops spinning. Changing the shell in registry for both local machine and current user causes this behavior. Any ideas on what might cause this? Alternatvely, what steps can I take to figure out what is going wrong? In Linux, you are able to open things in a framebuffer and examine the output, but with Windows it is not so clear to me how to see what is happening under the hood, especially with this Home Premuim version. Update: Since logging out normally to switch the shell back to Explorer doesn't work normally, I have to end Litestep first. However, when I do so, an Explorer navigation window pops up (not the taskbar). This also occurs with bb4win.

  Read the article

• Wireless DHCP doesn't work until wired Ethernet plugged in

  - by MT_Head

  A client of mine has an Asus R1F tablet running Windows XP Tablet SP3. It has an Intel 3945ABG wireless card; wired Ethernet is a Realtek something-or-other. In the past few days, it's developed an odd problem: WiFi authenticates, but can't get an address via DHCP. plug in wired Ethernet - both interfaces get good addresses unplug cable, WiFi continues to work until shutdown. Next morning, repeat process. I've tried: turning WiFi off/on (there's a slider switch) disabling/re-enabling via Device Mangler uninstalling and reinstalling the driver for the 3945ABG... changing from Intel Pro/SET to Windows Wireless Zero Config (and back) restarting the router changing the static DHCP assignments at the router upgrading the router firmware, just on general principles The router/access point is pfSense 1.2.3RC1 (was 1.2.2); wireless card is Atheros-based. None of the 12 other users (5 with tablets) are having problems.

  Read the article

• Computer froze up

  - by Arlen Beiler

  Why would my computer freeze up out of the blue? I have Apache Webserver w/php, and MySQL server installed. I am not sure exactly when it happened, but I was doing something on a wordpress site that I have installed, and it just waited and waited and waited. Then, all the folders on it that were open on my other computer closed, as though I had disconnected it. Then the skype account went offline. The computer was totally froze. I thought maybe it was someone on logmein, but disconnecting it from the network didn't do anything. I had to "crash" it (held in the power button till it shutdown). It started up normally then and the logs showed absolutely nothing wrong. And doing the same thing that I did when it froze didn't repeat the freeze. Any ideas, I never had this happen before.

  Read the article

• Laptop abruptly powers off after few seconds of booting

  - by Alan Mendelevich

  I have a 3 year old HP Pavilion dv2208 laptop. Recently it started abruptly powering off in like ~20-30 seconds into Windows boot sequence after almost every reboot/shutdown. Even if I leave it in Repair/Start Windows Normally stage it powers off anyway. The only way I managed to workaround this is to enter BIOS setup screen and leave it on for no less than 10 minutes. I don't know what happens there but this helps every time. Any ideas of possible ways to fix this that don't include replacing motherboard are highly appreciated. P.S.: I've tried resetting BIOS to defaults, updating to the latest BIOS version, etc. Happens with both Vista and Windows 7.

  Read the article

• Windows 7 systeminfo reporting incorrect System Boot Time?

  - by rdingwall

  I work 9-5 and switch my PC off when I leave the office each day. When doing timesheets I need to know what time I got to work, so I usually use cmd systeminfo for finding the System Boot Time. Since upgrading to Windows 7 however, it's started reporting bizarre numbers between 11pm-2am instead of 8-9am. Today it says it booted at 11:34pm last night! I checked the event log and there is no entries between when I shutdown at 5:30pm yesterday and booted around 8am this morning. Has anyone else encountered this?

  Read the article

• Trouble with installing VMWare-Player 3

  - by Peachy65

  After downloading the VMware-Player 3 from the VMware-Site I wanted to install it; because I used an older VMware-Player the system wanted this to be deinstalled this version first. After starting the deinstallation I had trouble with my machine - shutdown - now I have no proper deinstallation of the older VMware-Player and everytime, I want to install the 3.0, I get an error-message. Is there any possibility, to clean up the rest of the older installation (3-4 processes are still active or are starting again, when I try to close them and therefore I can't delete different .dll-files by hand)? Thanks for your help!

  Read the article

• Unmounted root partition

  - by Jack

  My server running Debian lenny has just had a power cut recently and its come back up with the root partition in read only mode. I tried to remount the filesystem in read write mode with mount -n -o remount,rw / which then gave the output mount: block device /dev/hda1 is write-protected, mounting read-only. But now the root filesystem isn't mounted at all so I can't run anything to mount the partition again or any other command for that matter such as shutdown because /bin/ isn't there. Is there anything I can do remotely?

  Read the article

• Laptop harddisk produces clicking sound

  - by Alfred James

  This happens when I am booting up into windows, shutdown or things in which I access the harddrive excessively. It doesn't happen all the time. I have checked it with "Crystal disk Info" and it displays no problem, and shows HDD to perfectly fine. Should I be worried about my HDD? I have Hitachi HDD in laptop. Some times my harddrive temps reach upto 43C while watching movies or playing games. What are the normal temps, which are safe for HDD to operate and increase the lifetime of HDD. Thanks

  Read the article

• How to run "mongodb --repair" if it's an Upstart job?

  - by Wolfram Arnold

  My MongoDB server died. The log says something about an unclean shutdown and an existing mongodb.lock file. It recommends to remove the lock file, then restart the mongodb server with --repair. However, on my system (Ubuntu 10.10), I've installed MongoDB via an apt-get package, and it's set up as Upstart job. If I run mongodb from the command line, it won't find the data, none of the paths are set correctly. Surely, I could read the man page, try to emulate what Upstart would do, give it all the correct parameters plus --repair but that seems like a lot of trouble. There must be a simpler way, that's not fighting Upstart. What is it?

  Read the article

• Windows 2000 under Windows 7 Virtual PC not working correctly

  - by dave

  I have just moved my Windows 2000 Virtual PCs from Vista to Windows 7 Professional (64-bit). The machines work to a point but I have found some problems: drive mapping does not seem to work any more. I need this to exchange data. I do not need network access to the virtual PC so would rather leave it unconnected. the virtual PC would automatically shutdown the session and go to the login screen after a few minutes of inactivity. I tried installing the Virtual PC Integration Components but the install failed (one of the messages basically says it's XP+ only). Now I'm stuck in 640x480 mode with mouse capture. I have heard that you can install an older version of the Integration Components but this sounds a bit suspect. Does anyone have any ideas on how to get Windows2000 working with drive sharing on a Virtual PC?

  Read the article

• Azure Linux Virtual Machines Price per Hour, Computation or Running?

  - by Arjun Bajaj

  first of all, I couldn't find a StackExchange site on Cloud Computing. I think this is the most appropriate site, because some of you might be using Azure. So I just wanted to know: The Windows Azure Pricing Page shows Linux Virtual Machine Price as $0.013/hr for an extra small VM. The monthly price comes up to about $10. Is this price charged as number of hours of computation done on the VM or number of hours of running the VM? And if I shutdown the VM, will I be charged anything?

  Read the article

• Cisco: unable to negotiate IP using IPCP with Windows server

  - by lnk

  I am connecting to Windows server using PPP (for vpn), I establish connection but server does not respond me for my address requests: *Mar 23 00:40:06.055: Vi1 MS-CHAP-V2: I CHALLENGE id 0 len 25 from "MSDC" *Mar 23 00:40:06.063: Vi1 MS CHAP V2: Using hostname from interface CHAP *Mar 23 00:40:06.063: Vi1 MS CHAP V2: Using password from interface CHAP *Mar 23 00:40:06.067: Vi1 MS-CHAP-V2: O RESPONSE id 0 len 69 from "XXX" *Mar 23 00:40:06.087: Vi1 PPP: I pkt type 0xC223, datagramsize 50 link[ppp] *Mar 23 00:40:06.087: Vi1 MS-CHAP-V2: I SUCCESS id 0 len 46 msg is "S=XXX" *Mar 23 00:40:06.087: Vi1 MS CHAP V2 No Password found for : XXX *Mar 23 00:40:06.091: Vi1 MS CHAP V2 Check AuthenticatorResponse Success for : XXX *Mar 23 00:40:06.091: Vi1 IPCP: O CONFREQ [Closed] id 1 len 20 *Mar 23 00:40:06.091: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:06.091: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:07.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to up *Mar 23 00:40:07.091: Vi1 LCP: O ECHOREQ [Open] id 1 len 12 magic 0x194CAFCF *Mar 23 00:40:07.103: Vi1 LCP-FS: I ECHOREP [Open] id 1 len 12 magic 0x361B62E5 *Mar 23 00:40:07.103: Vi1 LCP-FS: Received id 1, sent id 1, line up *Mar 23 00:40:08.083: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:08.083: Vi1 IPCP: O CONFREQ [REQsent] id 2 len 20 *Mar 23 00:40:08.083: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:08.083: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:10.099: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:10.099: Vi1 IPCP: O CONFREQ [REQsent] id 3 len 20 *Mar 23 00:40:10.099: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:10.099: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:12.115: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:12.115: Vi1 IPCP: O CONFREQ [REQsent] id 4 len 20 *Mar 23 00:40:12.115: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:12.115: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:12.211: Vi1 LCP: O ECHOREQ [Open] id 2 len 12 magic 0x194CAFCF *Mar 23 00:40:12.219: Vi1 LCP-FS: I ECHOREP [Open] id 2 len 12 magic 0x361B62E5 *Mar 23 00:40:12.219: Vi1 LCP-FS: Received id 2, sent id 2, line up *Mar 23 00:40:14.131: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:14.131: Vi1 IPCP: O CONFREQ [REQsent] id 5 len 20 *Mar 23 00:40:14.131: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:14.131: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:16.147: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:16.147: Vi1 IPCP: O CONFREQ [REQsent] id 6 len 20 *Mar 23 00:40:16.147: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:16.147: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:17.331: Vi1 LCP: O ECHOREQ [Open] id 3 len 12 magic 0x194CAFCF *Mar 23 00:40:17.343: Vi1 LCP-FS: I ECHOREP [Open] id 3 len 12 magic 0x361B62E5 *Mar 23 00:40:17.343: Vi1 LCP-FS: Received id 3, sent id 3, line up You see: My router asks for address, but only keepalives are on line. But the same server works with windows client!! ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service internal ! hostname Router ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! ip subnet-zero ! ! ip cef vpdn enable ! vpdn-group pptp request-dialin protocol pptp pool-member 1 initiate-to ip XXXX ! ! ! ! ! ! ! bridge irb ! ! interface ATM0 no ip address shutdown no atm ilmi-keepalive dsl operating-mode auto ! interface FastEthernet0 ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface Dot11Radio0 no ip address shutdown speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Vlan1 no ip address bridge-group 1 ! interface Dialer0 ip address negotiated encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer string XXX dialer persistent dialer vpdn dialer-group 1 keepalive 5 3 no cdp enable ppp authentication ms-chap-v2 optional ppp eap refuse ppp chap hostname XXX ppp chap password 0 XXX ppp ipcp mask request ppp ipcp ignore-map ppp ipcp address accept ! interface BVI1 mac-address XXX.XXX.XXX ip address dhcp ! ip classless ip route 172.0.0.0 255.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! dialer-list 1 protocol ip permit ! control-plane ! bridge 1 protocol vlan-bridge bridge 1 route ip ! line con 0 no modem enable line aux 0 line vty 0 4 login ! scheduler max-task-time 5000 end

  Read the article

• VirtualBox CPU usage 100% on host

  - by Sarveshwar

  I have installed VirtualBox 3.1.2 (latest) on my Windows 7 (x64). In the VirtualBox I've installed Windows 7 (x64). I have 4 GB RAM installed. The guest has been assigned a 1536 MB RAM. Sometimes the CPU usage on the host goes 100%. It happens everytime, in a few minutes, after starting the guest. Then it stops responding. Then I have to "power off the machine" from the menu without doing a proper shutdown. It happens with Windows XP as guest too (even when the RAM amount assigned to it was the same). What is the problem?

  Read the article

• Wake computer from sleep/standby without BIOS support for WOL?

  - by jjeaton

  Just bought a new home server and the nice folks at HP disabled the Wake-On-Lan feature in my motherboard. Are there any other options for waking the computer from Sleep/Standby mode? I'd like to take advantage of power savings wherever I can. I realize that I won't be able to wake it from shutdown, short of putting together some Rube Goldberg machine. EDIT: I'd like to be able to wake the machine on demand, remotely. So I can then RDP into it, or access files, etc.

  Read the article

• PostgreSQL 9.1 on Ubuntu Lucid fails to start - how to debug?

  - by Tom Fakes

  I'm using Vagrant with Chef Solo to setup a Lucid 64 box. I'm using a Chef recipe to install PostgreSQL 9.1 from Martin Pitt's backports. The install goes ok until the point where the database is started with /etc/init.d/postgresql start There's a log pause and the command fails. If I run pg_ctl manually, the database starts! The entire contents of my postgresql-9.1-main log file is: 2012-05-07 11:01:18 PDT LOG: database system was shut down at 2012-05-07 11:01:16 PDT 2012-05-07 11:01:18 PDT LOG: database system is ready to accept connections 2012-05-07 11:01:18 PDT LOG: autovacuum launcher started 2012-05-07 11:01:18 PDT LOG: incomplete startup packet 2012-05-07 11:01:26 PDT LOG: received fast shutdown request 2012-05-07 11:01:26 PDT LOG: aborting any active transactions 2012-05-07 11:01:26 PDT LOG: autovacuum launcher shutting down 2012-05-07 11:01:26 PDT LOG: shutting down 2012-05-07 11:01:26 PDT LOG: database system is shut down I've tried to change the postgresql config file to get more info into the logfile, but that hasn't worked at all. How do I debug this to find out what is failing so I can fix it?

  Read the article

• How can I launch RemoteApp on Windows Server from server itself at startup

  - by Rusted

  I have Windows Server 2008 R2 with RDS and custom desktop (GUI) application installed on the server. The app is started as RemoteApp on server by user from his desktop computer (or, sometimes, he can work from notebook over VPN). Some details about environment: the server automatically shuts down every evening and automatically power-on every morning (this is a requirement) desktop application do some precalculations/precaching on startup and it can take lot of time mentioned application have some memory leaks, so I can't use hibernate instead of shutdown When user launching this app from his computer, he can't start work with it until this app finishes pre-initialization. Is there any way to start RemoteApp session at the server startup (without actual user logon), so that the user could connect to this session from his computer later? I don't want to involve the user's computer to make it work. I have tried to do it by Windows startup script, but have no luck - starting RDP session requires actual user session.

  Read the article

• Unresponsive virtual OS

  - by confusedGeek

  Hopefully someone has a suggestion on how to resolve this. Configuration Host: Win 2003R2 w/Virtual Server 2005R2 Virtual1: Win 2003R2 w/Sql Server 2005 Virtual2: Win 2003R2 w/WSS 3.0 Situation This past weekend the power went out and took down the servers (no UPS, it's a desktop standing in as dev testing server). Since the servers went down the Virtual2 server after running WSS fairly heavily for an hour to two will become unresponsive via HTTP. If I login via virtual server's remote control I don't get anything beyond a background screen. The CPU counter on the virtual server's master status shows that it isn't doing anything. The only thing I have been able to do is to turn off Virtual2, which loses any state changes. Shutdown commands issue from the virtual server master status are ignored. After restarting Virtual2 the event logs and application logs don't indicate what caused the problem. Anyone have an idea as to how to repair the OS, or maybe what could be the problem? Thanks ahead of time.

  Read the article

• what Windowx XP LAN driver for Asus F5Z

  - by Radek

  a friend of mine asked me to re-install his Asus F5Z notebook with Windows XP. I installed succcessfully all drivers from assus driver download site. Everything is working fine but ethernet driver. The installation of Lan Driver for WIN XP finishes with strange message "Please shutdown & plug Realtech PCI-e card to complete the installation. Not sure if it matters but OnChip SATA is in 'Native IDE' mode . The original one with Vista was 'IDE - AHCI mode'. Any idea how I can make the LAN adapter to work under Windows XP?

  Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >