Search Results

Search found 12283 results on 492 pages for 'tcp port'.

Page 54/492 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• Cisco SR520w FE - WAN Port Stops Working

  - by Mike Hanley

  I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

  Read the article

• Can't create VM with virt-install on Debian wheezy

  - by chrismacp

  Cant find any answers anywhere so here goes. I am trying to CREATE a new virtual machine using the virt-install command from a console on a Debian wheezy install. I keep getting the following output: Starting install... ERROR internal error process exited while connecting to monitor: char device redirected to /dev/pts/1 inet_listen_opts: bind(ipv4,127.0.0.1,5951): Cannot assign requested address inet_listen_opts: FAILED I assumed that the port (5951 in this case) was being used judging by the error message and other sites I visited for an answer, but the same error occurs whatever number I use for the port. I cant see that port being listened upon in netstat either. Anyone have any ideas what may be wrong?

  Read the article

• Port scientific software to GPU and publish it

  - by Werner

  Hi, let's say that I am a physicist and that I am the master of the universe when it comes to port salready existing oftware to GPU's with 100x or more speedups. Let's say that I find that some other scientist, which does not know how to program GPU, publishes the Open Source code in his/her website of a physical simulation program, in the field I am expert on. Let's say that I realize "I can port that code to GPU", and I suggest him, but he shows no interest. My interest here is, 1) to port it to GPU, 2) to publish this result in a scientific journal related with physics and/or computer science My question for you is 1- would you proceed here to port the code to GPU (or other new arch) and publish it? 2- how would you do it and which journal do you suggest? Thanks

  Read the article

• possible SYN flooding on port 80. Sending cookies

  - by Sparsh Gupta

  I recently had a server downtime. I looked everywhere and the only thing I found in my log files is: Feb 17 18:58:04 localhost kernel: possible SYN flooding on port 80. Sending cookies. Feb 17 18:59:33 localhost kernel: possible SYN flooding on port 80. Sending cookies. Can someone give me more information about it. WHat is it, How can I debug the cause and how can I fix the same. I also posted ipconntrack suddenly became toooo large which has another data point I found unusual, wondering if the two things is connected as they occured exactly at the same time but at different servers. One at reverse proxy and other at actual backend Varnish server) Thanks

  Read the article

• VirtualBox guest responds to ping but all ports closed in nmap

  - by jeremyjjbrown

  I want to setup a test database on a vm for development purposes but I cannot connect to the server via the network. I've got Ubuntu 12.04vm installed on 12.04 host in Virtualbox 4.2.4 set to - Bridged network mode - Promiscuous Allow All When I try to ping the virtual guest from any network client I get the expected result. PING 192.168.1.209 (192.168.1.209) 56(84) bytes of data. 64 bytes from 192.168.1.209: icmp_req=1 ttl=64 time=0.427 ms ... Internet access inside the vm is normal But when I nmap it I get nothin! jeremy@bangkok:~$ nmap -sV -p 1-65535 192.168.1.209 Starting Nmap 5.21 ( http://nmap.org ) at 2012-11-15 18:39 CST Nmap scan report for jeremy (192.168.1.209) Host is up (0.0032s latency). All 65535 scanned ports on jeremy (192.168.1.209) are closed Service detection performed. Please report any incorrect results at http://nmap.org/submit/ Nmap done: 1 IP address (1 host up) scanned in 0.88 seconds ufw and iptables on VM... jeremy@jeremy:~$ sudo service ufw stop [sudo] password for jeremy: ufw stop/waiting jeremy@jeremy:~$ sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have scanned around and have no reason to believe that my router is blocking internal ports. jeremy@bangkok:~$ nmap -v 192.168.1.2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-11-15 18:44 CST Initiating Ping Scan at 18:44 Scanning 192.168.1.2 [2 ports] Completed Ping Scan at 18:44, 0.00s elapsed (1 total hosts) Initiating Parallel DNS resolution of 1 host. at 18:44 Completed Parallel DNS resolution of 1 host. at 18:44, 0.03s elapsed Initiating Connect Scan at 18:44 Scanning 192.168.1.2 [1000 ports] Discovered open port 445/tcp on 192.168.1.2 Discovered open port 139/tcp on 192.168.1.2 Discovered open port 3306/tcp on 192.168.1.2 Discovered open port 80/tcp on 192.168.1.2 Discovered open port 111/tcp on 192.168.1.2 Discovered open port 53/tcp on 192.168.1.2 Discovered open port 5902/tcp on 192.168.1.2 Discovered open port 8090/tcp on 192.168.1.2 Discovered open port 6881/tcp on 192.168.1.2 Completed Connect Scan at 18:44, 0.02s elapsed (1000 total ports) Nmap scan report for 192.168.1.2 Host is up (0.0017s latency). Not shown: 991 closed ports PORT STATE SERVICE 53/tcp open domain 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 445/tcp open microsoft-ds 3306/tcp open mysql 5902/tcp open vnc-2 6881/tcp open bittorrent-tracker 8090/tcp open unknown Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds Answer... Turns out all of the ports were open to the network. I installed open ssh and confirmed it. Then I edited my db conf to listen to external IP's and all was well.

  Read the article

• Proxy via Telnet

  - by Vreality2007

  I know telnet is insecure and all, but I'm stuck using it because ssh is blocked. I know how to setup ssh to bind the connection to a local port, is there a way to do this with telnet? For example, if I am using an ssh connection, I would bind it to port 999 like this: ssh -D 999 [email protected] -N -C I've tried using the -b command in linux, but to no avail. Is this even possible? This is what I've tried: telnet host.com -b 999 I'm sorry if the answer is obvious, but I've done a lot of research and testing and I can't seem to figure this out. NOTE: I plan on telling the admin if I can find a way to get this to work, this is based off of simple curiosity and not malicious intent. If I can't bind a telnet port, is there a way to tunnel an ssh connection through telnet?

  Read the article

• IIS - Forwarding requests to a folder to another port

  - by user1231958

  Context I currently installed Glassfish 3 in a server that currently holds ASP and PHP inside Internet Information Server 7 so we can start moving to a new system architecture (the information system is being remade). Obviously, Glassfish uses another port and without too much configuration (all I had to do is to install it) it worked. If I write www.domain.com:8080, the person will be redirected to the Glassfish server. Issue Obviously I don't want the person to write the port! I also believe it might also hold some security issues. Requirement I need the server to take an address of the form www.domain.com/gf or new.domain.com or something alike, and when it receives such a request, "redirect" (masking the URL) the user to the Glassfish website (www.domain.com:8080). Thank you beforehand!

  Read the article

• HTTP through a proxy server is not allowed

  - by jidma

  When I try to connect to my Tomcat server on http://<servername>:8080 it works fine, but from another ISP provided it gives the following error: HTTP through a proxy server is not allowed. Some ISP apparently don't allow http over the port 8080, as they think the client uses a proxy. I also have a httpd running on port 80 for my website. So in order to avoid the proxy error, I would like to make to following routing: If the user connects to http://<servername>, then the website is served via apache. If the user connects to http://<servername>/AppName, then the port is rerouted to 8080, without the client (or his ISP) knowing. Is that possible (using iptables or something else) ? Thank you

  Read the article

• cygwin ssh connection to server port 22 connection refused on localhost

  - by Steven Wexler

  I set up a ssh server through ssh-host-config. Then I started the server. net start sshd The CYGWIN sshd service is starting. The CYGWIN sshd service was started successfully. When I try to connect I get: ssh myusername@localhost ssh: connect to host localhost port 22: Connection refused I tried to allow port 22 in Windows Firewall, but that didn't change anything. And because I'm trying to ssh locally I don't think Windows Firewall is the culprit. I'm using Windows 7 and What should I look for to fix this problem?

  Read the article

• how to change port number of Apache server in windows OS

  - by jesop

  I have installed xampp control panel and Apache 2.2 on windows XP when I type http://localhost/ gives me page which says It Works! Now, I want to change the port number 80 to some other number How to change it ? in how many files does it needs to be changed ? dose it require to restart the system to change to take effect ? Note: I have changed port number in C:\xampp\apache\conf\httpd.conf in two places where it says Listen 80 and ServerName localhost:80 Pls help, thanks.

  Read the article

• PHP SOAP client accessing server on non-standard port

  - by sims

  The service I'm trying to send requests to is accessible via a non-standard port - so not port 80. It is accessible locally via port 80. So I've tested the app locally and it works fine. But when I deploy it on the production server (not on the LAN), it fails. Once again for clarity: -dev server is on the LAN -SOAP server is on the LAN -production server is on the WAN -SOAP server is accessible through the NAT/FW via a non-standard http port (not 80) The soap client is created with the specified WSDL URI. For example: $this->client = new Zend_Soap_Client('http://server.com:10080/path/service.asmx?WSDL'); But queries to not work: $this->client->function($query); I get an: Internal Server Error Exception thrown. Is PHP broken in this regard? Is there a workaround?

  Read the article

• Configure static IP with port number which will point to multiple projects on different ports

  - by Yogesh Kadam

  I am developing a project in LAM* and using the Symfony framework. I have one static IP like 99.99.99.99:8000 which points on my Linux server machine. This static IP already has port number of 8000. This Linux server machine has multiple project hosted on it and we access each project in LAN with different port number like abc:81, pqr:82, xyz:83. Is is possible to access each project on same Linux machine by this static IP? If yes then please let me know how to configure and call each project using this IP address.

  Read the article

• Port binding conflicts with "switch user" on Windows 7

  - by C-dizzle

  We are using the switch user function within Windows 7 under an active directory network. We have one application in particular that gives us an error: Only one usage of each socket address (protocol/network address/port) is normally permitted. bind Port 10001 Are there any other ports that can only be used at one time that might have an adverse effect on the other user? We try to mentor our users to use the log off function instead of switch user, but that doesn't always happen. As an alternative, is it possible to disable the 'switch user' button on our machines?

  Read the article

• How to bind Apache to specific IP and port on Windows Server 2008

  - by webworm

  I have a Windows Server 2008 R2 that I use to host various ASP.NET applications under IIS7. I would also like to run various PHP based web apps using Apache (or Apache 2). The server has three static IP addresses assigned to it and I would like to bind one of the IP addresses to Apache while using the other two IP addresses for IIS. I can use the IIS Manager to bind the specific IP addresses to IIS, but I am unaware of how to do this with Apache. Can anyone tell me how to go about binding Apache to a specific IP address and port (port 80 is what I want to use). Please note .. I am aware that PHP can run under IIS. In fact that is how I have been running my PHP web applications. However, there are so many inconsistencies and pitfalls with PHP running under IIS that I just prefer to use Apache.

  Read the article

• Configuring a Jetty web application on a different port

  - by sHz

  Hi folks, I'm brand new to Jetty. I'd like to ask if its possible to have Jetty listening on port 8080, however where specified, serve a specific web application under say /var/jetty/webapps/<appname> (default on CentOS) served on say port 10000 instead of http://localhost:8080/<appname> i.e. http://localhost:10000/ = http://localhost:8080/<appname&gt; ? If so, what configuration changes would be required to make this work without an additional proxy server? I've googled away, but haven't found a solution (perhaps I've missed something obvious?).

  Read the article

• Linux script to kill process listening on a particular port

  - by Evgeny

  I have a process that listens on a TCP port (?0003). From time to time it crashes - badly. It stops working, but continues hogging the port for some time, so I can't even restart it. I'm looking to automate this. What I do right now is: netstat -ntlp |grep -P "\*\:\d0003" To see what the PID is and then: kill -9 <pid> Does anyone have a script (or EXE for that matter) that would link the two steps together, ie. parse the PID from the first command and pass it to the second?

  Read the article

• route port 3000 to apache2 alias

  - by user223470

  I have a meteor application running on port 3000. I can successfully connect to the program with www.myurl.com:3000, but would rather connect to it via www.myurl.com/myappname. I started with the instructions on this web site: http://www.andrehonsberg.com/article/deploy-meteorjs-vhosts-ubuntu1204-mongodb-apache-proxy and I have the following Apache configuration file: <VirtualHost *:80> ServerName myurl.com ProxyRequests off <Proxy *> Order deny,allow Allow from all </Proxy> <Location /> ProxyPass http://localhost:3000/ ProxyPassReverse http://localhost:3000/ </Location> </VirtualHost> I do not know how to continue from here to get the program on www.mysite.com/myapp. In other situations, I would use an Alias within the Apache configuration file, but that doesn't seem like the right direction to go in this case. How do I configure Apache to send port 3000 to www.myurl.com/myapp?

  Read the article

• User Friendly port knocker (port knocking client) for Windows?

  - by Ekevoo

  It seems "It's me" is the most popular port knocking client for windows… Except… it sucks. It works for console-savvy users such as me, but, unsurprisingly, all my users hate console windows. I know better than to force it upon them. I would love to have a nice port knocker for Windows that would be windowed, have launchers, and be easily provisionable (i.e. I tell my user to paste some settings or import some file by double clicking it). To be honest, just not being console-based would be enough.

  Read the article

• Specifying --host1 as localhost with port 8983 in autobench

  - by mamatha

  I am using autobench for benchmarking in ubuntu 8.10 autobench --single_host --host1 localhost --uri1 /solr/admin --low_rate 20 --high_rate 200 --rate_step 20 --num_call 10 --num_conn 5000 --timeout 5 --file bench1.tsv This is the command which I gave. It is taking the default port as 80 and the number of replies and requests are as shown below **Errors: total 5000 client-timo 0 socket-timo 0 connrefused 5000 connreset 0 Errors: fd-unavail 0 addrunavail 0 ftab-full 0 other 0 Zero replies received, test invalid: rate 20 httperf --timeout=5 --client=0/1 --server=localhost --port=80 --uri=/solr/admin --rate=40 --send-buffer=4096 --recv-buffer=16384 --num-conns=5000 --num-calls=10 Maximum connect burst length: 4 Total: connections 5000 requests 0 replies 0 test-duration 124.976 s** But, I want the port to be 8983. In all the examples that I have seen in the autobench tutorial, --host1 is a website (such as, www.test.com). Can anyone suggest how to use localhost taking the port as 8983? Thanks, in advance.

  Read the article

• xinet vs iptables for port forwarding performance

  - by jamie.mccrindle

  I have a requirement to run a Java based web server on port 80. The options are: Web proxy (apache, nginx etc.) xinet iptables setuid The baseline would be running the app using setuid but I'd prefer not to for security reasons. Apache is too slow and nginx doesn't support keep-alives so new connections are made for every proxied request. xinet is easy to set up but creates a new process for every request which I've seen cause problems in a high performance environment. The last option is port forwarding with iptables but I have no experience of how fast it is. Of course, the ideal solution would be to do this on a dedicated hardware firewall / load balancer but that's not an option at present.

  Read the article

• Single-port 2600 router with 2900XL switch

  - by Slava Maslennikov

  I have a setup, where the single port 2600 router is in port 0/2 in the switch, outside network is on port 0/1, and the rest (0/3-0/24) should be clients for the second network that would be managed by the 2600 router. I configured everything with two VLANs: 100 for outside (0/2-0/24), 200 for inside (0/1-0/2). 0/2 is a trunk port for the two VLANs. The issue that came about is that I can't have two VLANs on at once: software doesn't allow it. Now, I can ping the outside network devices (172.16.7.1, 172.16.7.103), and even google (8.8.8.8) from the router, but not the switch. Devices on connected get a DHCP lease properly but can't ping outside the network, just the router - 172.17.7.1 and the switch itself, 172.17.7.7. The configuration for both the router and the switch are here, as well as below. Router: rt.throom#sho run Building configuration... Current configuration : 1015 bytes ! version 12.1 no service single-slot-reload-enable service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname rt.throom ! enable password To053cret ! ! ! ! ! no ip subnet-zero ip dhcp excluded-address 172.17.7.1 172.17.7.2 ip dhcp excluded-address 172.17.7.3 172.17.7.4 ip dhcp excluded-address 172.17.7.5 ! ip dhcp pool VLAN200 network 172.17.7.0 255.255.255.0 default-router 172.17.7.1 dns-server 8.8.8.8 ! ip audit notify log ip audit po max-events 100 ! ! ! ! ! ! ! interface Ethernet0/0 no ip address ! interface Ethernet0/0.100 encapsulation dot1Q 100 ip address 172.16.7.15 255.255.255.0 ip nat outside ! interface Ethernet0/0.200 encapsulation dot1Q 200 ip address 172.17.7.1 255.255.255.0 ip nat inside ! router eigrp 20 network 172.16.0.0 network 172.17.0.0 no auto-summary no eigrp log-neighbor-changes ! no ip classless no ip http server ! access-list 1 permit 172.17.7.0 0.0.0.255 ! ! line con 0 line aux 0 line vty 0 4 login ! end Switch: sw.throom#sho run Building configuration... Current configuration: ! version 11.2 no service pad no service udp-small-servers no service tcp-small-servers ! hostname sw.throom ! enable password Oh5053cret ! ! no spanning-tree vlan 100 no spanning-tree vlan 200 ip subnet-zero ! ! interface VLAN1 no ip address no ip route-cache ! interface FastEthernet0/1 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/2 switchport trunk encapsulation dot1q switchport mode trunk ! interface FastEthernet0/3 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/4 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/5 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/6 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/7 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/8 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/9 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/10 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/11 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/12 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/13 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/14 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/15 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/16 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/17 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/18 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/19 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/20 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/21 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/22 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/23 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/24 switchport access vlan 200 spanning-tree portfast ! ! line con 0 stopbits 1 line vty 0 4 login line vty 5 9 login ! end sho ip route gives: Gateway of last resort is 172.16.7.1 to network 0.0.0.0 172.17.0.0/24 is subnetted, 1 subnets C 172.17.7.0 is directly connected, Ethernet0/0.200 172.16.0.0/24 is subnetted, 1 subnets C 172.16.7.0 is directly connected, Ethernet0/0.100 S* 0.0.0.0/0 [1/0] via 172.16.7.1

  Read the article

• How can I simulate blocking RTMP over port 80 on Windows?

  - by Christian Nunciato

  It seems like this should be so simple, but since this isn't my area of expertise, I'm having a hell of a time figuring out how to do it. Basically, I have a Flash app and I'm connecting to a Flash Media Server to stream some content. The URL I'm using to do this, for example, looks like this: rtmp://someserver.com/some/path/mp3:somefile Everything works -- but that's sort of the problem. When I'm trying to do is simulate my users attempting to play back my media under more restrictive conditions than the ones I have here (i.e., none) -- namely being stuck behind firewalls or proxy servers that block access to RTMP streams. Flash, according to Adobe, is equipped to handle proxy servers and firewalls automatically, like so (from the docs): When you do not specify a port number in an RTMP address, Flash will attempt to connect to port 1935. If it fails it will then try to connect to port 443; if that fails, it will try port 80. [And if that fails, it will attempt to connect via RTMPT (i.e., HTTP tunneling) on port 80.] So no coding is required to access ports 1935, 443, or port 80 if you do not specify a port in the RTMP address. The problem I'm having is setting up a reliable environment in which to test that this behavior actually happens. I'm on a Windows machine, for example, so with Windows Firewall, I can block certain ports and protocols (1935, 443), but I don't want to block port 80, because the final fallback protocol (RTMPT) is supposed to run on port 80, and Windows Firewall only gives me enough granularity (as far as I know, anyway) to block "all outbound TCP traffic to remote port 80" -- that is, I can't, apparently, block "all outbound RTMP traffic to port 80" while leaving RTMPT traffic to port 80 unaffected. My understanding thus far is that I'll probably need to set up a proxy server to do this. Is this correct? Or is there a simpler way (on Win 7, at least) to filter out RTMP to 1935, RTMP to 443, RTMP to 80, but still allow RTMPT to 80 (where all four hostnames are identical)? And if I do have to set up a proxy server, what's the simplest way to go on Windows? I've set up WinProxy, which seems a bit janky but apparently works -- but then what I can't figure out is how to tell Windows to force all TCP traffic (including RTMP, RTMPT and HTTO) through this proxy server so I can turn around and reject the requests for RTMP. Any help would be hugely appreciated. This isn't my realm of expertise and I've alreasdy spent more time on it than I probably should. :)

  Read the article

• Is opening ports in the firewall bad?

  - by Steven

  From what little I know about networking, opening ports lets external data get sent in. But how that data is handled is entirely up to the applications running on my machine. So if I'm not running any malicious applications, there should be nothing wrong with disabling the firewall, right? Also, how do applications work when ports aren't forwarded? For example, I need to forward port TCP 6112 to host Blizzard games, but I've heard that HTTP uses port 80, but I haven't forwarded that port, yet Firefox still works. Btw I'm using Windows Vista.

  Read the article

• Configure Windows firewall to prevent an application from listening on a specific port [closed]

  - by U-D13

  The issue: there are many applications struggling to listen on port 80 (Skype, Teamviewer et al.), and to many of them that even is not essential (in the sense that you can have a httpd running and blocking the http port, and the other application won't even squeak about being unable to open the port). What makes things worse, some of the apps are... Well, I suppose, that it's okay that the mentally impaired are being integrated in the society by giving them a job to do, but... Programming requires some intellectual effort, in my humble opinion... What I mean is that there is no way to configure the app not to use specific ports (that's what you get for using proprietary software) - you can either add it to windows firewall exceptions (and succumb to undesired port opening behavior) or not (and risk losing most - if not all - of the functionality). Technically, it is not impossible for the firewall to deny an application opening an incoming port even if the application is in the exception list. And if this functionality is built into the Windows firewall somewhere, there should be a way to activate it. So, what I want to know is: whether there exists such an option, and if it does how to activate it.

  Read the article

• Get the tcp port web site is served on

  - by Roman Prikhodchenko

  I need to get a tcp port of the specified web site on IIS 7 and IIS 6 using C#. I have a console application that knows the web site's name. It should find a port this web site is served on.

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >