Search Results

Search found 41305 results on 1653 pages for 'ubuntu studio'.

Page 54/1653 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • Problem about IP and computer name in Ubuntu

    - by bugbug
    I can't connect to mysql database becase it alway change 192.168.1.101 to ubuntu.local. $ mysql -uroot -padmin1234 -h192.168.1.101 ERROR 1045 (28000) : Access denined for user 'root'@'ubuntu.local' (using password: YES) How do I solve this problem. File: /etc/hosts in this machine 127.0.0.1 localhost 127.0.1.1 ubuntu.ubuntu-domain ubuntu # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts I have no idea about "root'@'ubuntu.local", where is it come from.

    Read the article

  • How to netboot ubuntu running iniside VirtualBox on Mac Air

    - by murungu
    Having configured a virtual machine for Ubuntu on VirtualBox on my mac air I need to install Ubuntu OS itself. I have selected the hardrive as the primary boot device and the network as the secondary boot device, so I am not prompted to install an Ubuntu disk at boot time. It attempts to netboot but is unable to locate Ubuntu and cannot find anywhere in the configuration where I can explicitly specify where to find and Ubuntu image, so assume it reverts to some default location and fails. Has anybody out there ever successfully installed ubuntu on virtual box on their Mac Air? What steos did you take to get it right?

    Read the article

  • Routing Traffic on Ubuntu to give Raspberry PI Internet Access

    - by Scruffers
    I'm hoping someone can point me in the right direction for setting up my Linux (Ubuntu 12.04) box to route traffic from eth0 to wlan0. I'll try and explain the problem I am trying to solve: I currently have two separate networks: [RaspberryPi/eth0] 192.168.2.2 / 255.255.255.0 ^ | v [Ubuntu/eth0] 192.168.2.1 / 255.255.255.0 And: [Ubuntu/wlan0] 192.168.1.100 / 255.255.255.0 ^ | v [ADSL router] 192.168.1.1 / 255.255.255.0 So currently if I want to access the RaspberryPI I can SSH from the Ubuntu box to the PI. And if I want to use the Internet, I have full access from the Ubuntu box, but nothing from the RaspberryPI - the two networks are partitioned. What I would like to do is configure things so that the RaspberryPI has Internet access via the Ubuntu box and out to the Internet. I tried to create a bridge, but got the message "wlan0: operation not supported" (wireless chipset is Ralink RT3062). I'm sure giving the Raspberry PI Internet access should be easy to do in this configuration, but I am a bit lost - can someone point me in the right direction please?

    Read the article

  • Ubuntu 10.10 and Windows 7 (TrueCrypt) Multi-boot Problems

    - by Samuel Taylor
    I have now been searching days for a solution but have found nothing. I have Ubuntu 10.10 and Windows 7 with TrueCrypt as a multi-boot. It was working fine for a few weeks until I needed to reinstall Ubuntu. If I have the boot flag on the partition where Windows 7 is install (This is where the boot flags was when working before.), it boots fine in to Windows 7 but when pressing Esc it can't find grub2. If I have the boot flag on the partition where Ubuntu is install, it boots fine in to Ubuntu (by pressing Esc or typing the password) but unable to access Windows. I have tried reinstalling TrueCrypt Boot loader and repairing the header but it have no affect. My Partitions: sda1 - Windows 7 Recovery (GRUB2) sda2 - Windows 7 (TrueCrypt Boot Loader) sda3 - Ubuntu 10.10 (/) sda4 - Extended sda5 - Swap sda6 - Ubuntu (/home) Does anyone have any ideas? Thanks Sam

    Read the article

  • Why can't I install Ubuntu 10.04 on a system that already has Ubuntu 8.04?

    - by Android Eve
    Ubuntu 10.04 is beautiful. I love it. I am dying to install it on my PC, alongside the existing Ubuntu 8.04 (from which I write this message right now). But... it won't let me! When I reach the partitioning stage (manual!) Ubuntu 10.04 sees my two HDDs as one RAID volume. It doesn't see all the partitions I already have in place in /dev/sda and /dev/sdb. Even Windows 7 doesn't behave like this... (yes, I actually managed to install Windows 7 64-bit in dual-boot configuration with Ubuntu 8.04 on this same system). Note: GParted on Ubuntu 10.04 (live CD) sees the partition intended for Ubuntu 10.04 (/dev/sda4) perfectly, but is unable to format it. Any idea how to solve this problem?

    Read the article

  • Access Windows VPN DNS from Ubuntu

    - by user46427
    I am using Ubuntu 10.04 to access a Windows VPN. I connect to the VPN from Ubuntu, and when I open a Windows 7 virtual machine (VirtualBox), everything works great ... I can access local network drives, ping local servers, remote into local machines, etc. However, I can do none of this from Ubuntu. With the VPN connected, I cannot even ping anything within the VPN local network. I'm guessing it's a DNS issue that Windows is handling automatically but Ubuntu needs a setting somewhere to tell it to use the DNS servers of the VPN network? Any ideas? I'm a relative novice to Ubuntu, esp. VPN in Ubuntu. [EDIT] Actually, I'm almost positive it is DNS, because if I get the IP address from the Windows VM I can use Terminal Server Client to remote into a machine.

    Read the article

  • Integrate Bing Search API into ASP.Net application

    - by sreejukg
    Couple of months back, I wrote an article about how to integrate Bing Search engine (API 2.0) with ASP.Net website. You can refer the article here http://weblogs.asp.net/sreejukg/archive/2012/04/07/integrate-bing-api-for-search-inside-asp-net-web-application.aspx Things are changing rapidly in the tech world and Bing has also changed! The Bing Search API 2.0 will work until August 1, 2012, after that it will not return results. Shocked? Don’t worry the API has moved to Windows Azure market place and available for you to sign up and continue using it and there is a free version available based on your usage. In this article, I am going to explain how you can integrate the new Bing API that is available in the Windows Azure market place with your website. You can access the Windows Azure market place from the below link https://datamarket.azure.com/ There is lot of applications available for you to subscribe and use. Bing is one of them. You can find the new Bing Search API from the below link https://datamarket.azure.com/dataset/5BA839F1-12CE-4CCE-BF57-A49D98D29A44 To get access to Bing Search API, first you need to register an account with Windows Azure market place. Sign in to the Windows Azure market place site using your windows live account. Once you sign in with your windows live account, you need to register to Windows Azure Market place account. From the Windows Azure market place, you will see the sign in button it the top right of the page. Clicking on the sign in button will take you to the Windows live ID authentication page. You can enter a windows live ID here to login. Once logged in you will see the Registration page for the Windows Azure market place as follows. You can agree or disagree for the email address usage by Microsoft. I believe selecting the check box means you will get email about what is happening in Windows Azure market place. Click on continue button once you are done. In the next page, you should accept the terms of use, it is not optional, you must agree to terms and conditions. Scroll down to the page and select the I agree checkbox and click on Register Button. Now you are a registered member of Windows Azure market place. You can subscribe to data applications. In order to use BING API in your application, you must obtain your account Key, in the previous version of Bing you were required an API key, the current version uses Account Key instead. Once you logged in to the Windows Azure market place, you can see “My Account” in the top menu, from the Top menu; go to “My Account” Section. From the My Account section, you can manage your subscriptions and Account Keys. Account Keys will be used by your applications to access the subscriptions from the market place. Click on My Account link, you can see Account Keys in the left menu and then Add an account key or you can use the default Account key available. Creating account key is very simple process. Also you can remove the account keys you create if necessary. The next step is to subscribe to BING Search API. At this moment, Bing Offers 2 APIs for search. The available options are as follows. 1. Bing Search API - https://datamarket.azure.com/dataset/5ba839f1-12ce-4cce-bf57-a49d98d29a44 2. Bing Search API – Web Results only - https://datamarket.azure.com/dataset/8818f55e-2fe5-4ce3-a617-0b8ba8419f65 The difference is that the later will give you only web results where the other you can specify the source type such as image, video, web, news etc. Carefully choose the API based on your application requirements. In this article, I am going to use Web Results Only API, but the steps will be similar to both. Go to the API page https://datamarket.azure.com/dataset/8818f55e-2fe5-4ce3-a617-0b8ba8419f65, you can see the subscription options in the right side. And in the bottom of the page you can see the free option Since I am going to use the free options, just Click the Sign Up link for that. Just select I agree check box and click on the Sign Up button. You will get a recipt pagethat detail your subscription. Now you are ready Bing Search API – Web results. The next step is to integrate the API into your ASP.Net application. Now if you go to the Search API page (as well as in the Receipt page), you can see a .Net C# Class Library link, click on the link, you will get a code file named “BingSearchContainer.cs”. In the following sections I am going to demonstrate the use of Bing Search API from an ASP.Net application. Create an empty ASP.Net web application. In the solution explorer, the application will looks as follows. Now add the downloaded code file (“BingSearchContainer.cs”) to the project. Right click your project in solution explorer, Add -> existing item, then browse to the downloaded location, select the “BingSearchContainer.cs” file and add it to the project. To build the code file you need to add reference to the following library. System.Data.Services.Client You can find the library in the .Net tab, when you select Add -> Reference Try to build your project now; it should build without any errors. Add an ASP.Net page to the project. I have included a text box and a button, then a Grid View to the page. The idea is to Search the text entered and display the results in the gridview. The page will look in the Visual Studio Designer as follows. The markup of the page is as follows. In the button click event handler for the search button, I have used the following code. Now run your project and enter some text in the text box and click the Search button, you will see the results coming from Bing, cool. I entered the text “Microsoft” in the textbox and clicked on the button and I got the following results. Searching Specific Websites If you want to search a particular website, you pass the site url with site:<site url name> and if you have more sites, use pipe (|). e.g. The following search query site:microsoft.com | site:adobe.com design will search the word design and return the results from Microsoft.com and Adobe.com See the sample code that search only Microsoft.com for the text entered for the above sample. var webResults = bingContainer.Web("site:www.Microsoft.com " + txtSearch.Text, null, null, null, null, null, null); Paging the results returned by the API By default the BING API will return 100 results based on your query. The default code file that you downloaded from BING doesn’t include any option for this. You can modify the downloaded code to perform this paging. The BING API supports two parameters $top (for number of results to return) and $skip (for number of records to skip). So if you want 3rd page of results with page size = 10, you need to pass $top = 10 and $skip=20. Open the BingSearchContainer.cs in the editor. You can see the Web method in it as follows. public DataServiceQuery<WebResult> Web(String Query, String Market, String Adult, Double? Latitude, Double? Longitude, String WebFileType, String Options) {  In the method signature, I have added two more parameters public DataServiceQuery<WebResult> Web(String Query, String Market, String Adult, Double? Latitude, Double? Longitude, String WebFileType, String Options, int resultCount, int pageNo) { and in the method, you need to pass the parameters to the query variable. query = query.AddQueryOption("$top", resultCount); query = query.AddQueryOption("$skip", (pageNo -1)*resultCount); return query; Note that I didn’t perform any validation, but you need to check conditions such as resultCount and pageCount should be greater than or equal to 1. If the parameters are not valid, the Bing Search API will throw the error. The modified method is as follows. The changes are highlighted. Now see the following code in the SearchPage.aspx.cs file protected void btnSearch_Click(object sender, EventArgs e) {     var bingContainer = new Bing.BingSearchContainer(new Uri(https://api.datamarket.azure.com/Bing/SearchWeb/));     // replace this value with your account key     var accountKey = "your key";     // the next line configures the bingContainer to use your credentials.     bingContainer.Credentials = new NetworkCredential(accountKey, accountKey);     var webResults = bingContainer.Web("site:microsoft.com" +txtSearch.Text , null, null, null, null, null, null,3,2);     lstResults.DataSource = webResults;     lstResults.DataBind(); } The following code will return 3 results starting from second page (by skipping first 3 results). See the result page as follows. Bing provides complete integration to its offerings. When you develop search based applications, you can use the power of Bing to perform the search. Integrating Bing Search API to ASP.Net application is a simple process and without investing much time, you can develop a good search based application. Make sure you read the terms of use before designing the application and decide which API usage is suitable for you. Further readings BING API Migration Guide http://go.microsoft.com/fwlink/?LinkID=248077 Bing API FAQ http://go.microsoft.com/fwlink/?LinkID=252146 Bing API Schema Guide http://go.microsoft.com/fwlink/?LinkID=252151

    Read the article

  • Installed Ubuntu 14.04LTS

    - by user291729
    On my laptop which came pre-installed with Windows 8.1. Felt I needed to see the competition for myself to establish which was a better OS. So I followed the channels to dual boot. All seemed fine and I accessed Ubuntu with no issues after selecting this from the menu to select the OS. I should add that the boot method was changed to legacy. However, since using Ubuntu, I no longer have the ability to select the OS. The laptop simply logs straight into Ubuntu. I therefore attempted to access the recovery options, only it appears the Windows 8 bootloader has somehow been corrupted as I am now told to use the Windows 8 recovery disc (which, as this was pre-installed - I do not have). Left with no other alternative, I have scoured these forums without success, and so I am hoping someone in the know (or who has experienced similar) can help. I have tried boot repair again without success. On rebooting I am only presented with a basic splash screen asking me to select Ubuntu, Memtest, Windows 8 Recovery or Windows 8 Bootloader (The bootloaders again require I insert the disc). I have tried Code: cat /boot/grub/grub.cfg df -h sudo fdisk -l cat /proc/partitions # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda9 84G 7.1G 73G 9% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 3.9G 4.0K 3.9G 1% /dev tmpfs 794M 1.4M 793M 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 80K 3.9G 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sdc1 7.5G 2.2G 5.4G 29% /media/john/DYLANMUSIC /dev/sr0 964M 964M 0 100% /media/john/Ubuntu 14.04 LTS amd64 /dev/sdb1 1.9T 892G 972G 48% /media/john/Storage Main WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4e2ccf75 Device Boot Start End Blocks Id System /dev/sda1 1 1953525167 976762583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 8011 MB, 8011120640 bytes 41 heads, 41 sectors/track, 9307 cylinders, total 15646720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 15646719 7819328 b W95 FAT32 Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc7d968ff Device Boot Start End Blocks Id System /dev/sdb1 64 3907029119 1953514528 7 HPFS/NTFS/exFAT major minor #blocks name 8 0 976762584 sda 8 1 266240 sda1 8 2 1509376 sda2 8 3 266240 sda3 8 4 131072 sda4 8 5 841012780 sda5 8 6 358400 sda6 8 7 35376128 sda7 8 8 1024 sda8 8 9 89501696 sda9 8 10 8337408 sda10 11 0 987136 sr0 8 32 7823360 sdc 8 33 7819328 sdc1 8 16 1953514584 sdb 8 17 1953514528 sdb1 I am no expert on this and I'm at a loss as how to correct this without having to re-format everything and reinstall Windows 8. However, if I'm to try using Ubuntu again then there is the risk this problem may come back. Again, I did not do anything manually - the installer did everything (with the exception of changing the boot to Legacy to allow the booting of another bootloader). LiveCD works but doesn't give me the options that I've seen here and as mentioned earlier, only boot recovery only gives me the options as mentioned earlier. Also this fails to load via USB (possibly because HDD comes before USB in the boot order?). Being used to a Windows environment, the Ubuntu (and Linux) environment is a dive at a less than comfortable depth at present (but one I fully intend to get to grips with - especially the commands being more common via Terminal). I very much appreciate the help with this guys.

    Read the article

  • Ubuntu option vanishes after setting up windows XP(?) [closed]

    - by Ravi
    I have installed both windows XP as well as Ubuntu 9.04 on my machine.I can choose between them using dual boot option at the startup.Up to this, it is fine. But unfortunately when my XP crashes, I need to install XP again.But when I do it,after installing XP successfully, dual boot option no longer appears at the startup. So the Ubuntu goes in vein. What is the problem here? How do I solve it?

    Read the article

  • A Visual Studio tool eliminating the need to rewrite for web and mobile

    - by Visual WebGui
    We have already covered the BYOD requirements that an application developer is faced with, in an earlier blog entry ( How to Bring Your Own Device (BYOD) to a .NET application ). In that entry we emphasized the fact that application developers will need to prepare their applications for serving multiple types of devices on multiple platforms, ranging from the smallest mobile devices up to and beyond the largest desktop devices. The experts prediction is that in the near future we will see that the...(read more)

    Read the article

  • ASP.NET and Visual Studio 2010 – Service Pack 1

    - by Ken Cox [MVP]
    Want to have a say in what goes into the ASP.NET bits of service pack 1 for VS 2010? Well, spend a few minutes filling out the online survey posted by the ASP.NET team: http://www.surveymonkey.com/s/MLCDPN7 If your most urgent fix doesn’t make it into service pack 1, it might be because you didn’t speak up and provide details at the right time – like now!   Ken...(read more)

    Read the article

  • Setting up Visual Studio 2010 to step into Microsoft .NET Source Code

    - by rajbk
    Using the Microsoft Symbol Server to obtain symbol debugging information is now much easier in VS 2010. Microsoft gives you access to their internet symbol server that contains symbol files for most of the .NET framework including the recently announced availability of MVC 2 Symbols.  SETUP In VS 2010 RTM, go to Tools –> Options –> Debugging –> General. Check “Enable .NET Framework source stepping” We get the following dialog box   This automatically disables “Enable My Code”   Go to Debugging –> Symbols and Check “Microsoft Symbol Servers”. You can selectively exclude modules if you want to.   You will get a warning dialog like so: Hitting OK will start the download process   The setup is complete. You are now ready to start debugging! DEBUGGING Add a break point to your application and run the application in debug mode (F5 shortcut for me). Go to your call stack when you hit the break point. Right click on a frame that is grayed out. Select “Load Symbols from” “Microsoft Symbol Servers”. VS will begin a one time download of that assembly. This assembly will be cached locally so you don’t have to wait for the download the next time you debug the app.   We get a one time license agreement dialog box You might see an error like the one below regarding different encoding (hopefully will be fixed).    Assemblies for which the symbols have been loaded are no longer grayed out. Double clicking on any entry in the call stack should now directly take you to the source code for that assembly. AFAIK, not all symbols are available on the MS symbol server. In cases like that you will see a tab like the one below and be given the option to “Show Disassembly”. Enjoy! Newsreel Announcer: Humiliated, Muntz vows a return to Paradise Falls and promises to capture the beast alive! Charles Muntz: [speaking to a large audience outside in the newsreel] I promise to capture the beast alive, and I will not come back until I do!

    Read the article

  • Should I avoid SharePoint Development in Visual Studio?

    - by SaphuA
    Hello, Not long ago I started an internship at a company that supplies SharePoint consultancy, hosting and development. While their consultancy seems to be pretty good and solid, I feel their development department lacks direction. The reason for this, most likely, is that they stopped outsourcing not too long ago. One thing that I've frequently bumped my head into is the following: My supervisor strongly insists that everything that can be done natively in SharePoint (somehow this includes editing xslt files in Designer) should be done in SharePoint. Even if this results in longer development time (at least when they make me write XSLT) and reduced usability. Her main arguments for this are: Better maintainability Editing the functionality doesn't require programming knowledge I feel the company is a little biassed and I am unable to get a decent discussion going. This is why I am looking for other places to get some responses on the subject (and not only on the arguments of my supervisor, but more on the subject in general). Kind regards

    Read the article

  • Visual Studio Service Pack 1 - Test first!

    - by CraigG
    It appears that our run of fairly benign VS SP’s is over… I've now installed the VS 2010 SP1 in a few simple test environments (x64) and all of them are having issues. Add-in failures, failed package loading, missing SQL Intellisense, XAML designer failure, etc. Make sure you test this Service Pack thoroughly before you release it to your production environment. Microsoft Connect is the official repository for issues with Service Pack 1.

    Read the article

  • Should I avoid SharePoint Development in Visual Studio?

    - by SaphuA
    Not long ago I started an internship at a company that supplies SharePoint consultancy, hosting and development. While their consultancy seems to be pretty good and solid, I feel their development department lacks direction. The reason for this, most likely, is that they stopped outsourcing not too long ago. One thing that I've frequently bumped my head into is the following: My supervisor strongly insists that everything that can be done natively in SharePoint (somehow this includes editing xslt files in Designer) should be done in SharePoint. Even if this results in longer development time (at least when they make me write XSLT) and reduced usability. Her main arguments for this are: Better maintainability Editing the functionality doesn't require programming knowledge I feel the company is a little biassed and I am unable to get a decent discussion going. This is why I am looking for other places to get some responses on the subject (and not only on the arguments of my supervisor, but more on the subject in general). Kind regards

    Read the article

  • Page Inspector and Visual Studio 2012

    - by nikolaosk
    In this post I will be looking into a new feature that has been added to theVS 2012 IDE. I am talking about Page Inspector that gives developers a very good/handy way to identify layout issues and to find out which part of server side code is responsible for that HTML snippet of code.If you are interested in reading other posts about VS 2012 and .Net 4.5 please have a look here and here.This tool is integrated into the VS 2012 IDE.We can launch it in different ways. 1) We will create a new ASP.Net MVC application (an Internet application). I will not add any code.2) In the Solution Explorer I choose my project and right-click. From the available options select View in Page InspectorHave a look at the picture below.  3) We can launch Page Inspector from the Standard Toolbar. Please have a look at the picture below.   4) Let's view our application with Page Inspector. First I inspect the About link-menu.I can see very quickly the HTML that is rendering for that link to appear. I also see the server side code (the actual view, _Layout.cshtml) that is responsible for that link. This is something developers always craved for. We can also see the CSS styles that are used to style this link (About).Have a look at the picture below Obviously there are similar tools that I have been using in the past when I wanted to change a part of the HTML or see what piece of CSS code affects my layout. I used Firebug when viewing my web applications in the Firefox browser. Internet Explorer and Chrome have also great similar tools that help web developers to identify issues with a site's appearance/issues.Please bear in mind that Page Inspector works with all forms of the ASP.Net stack e.g Web Forms,Web Pages.Hope it helps!!!!!

    Read the article

  • Iptables on ubuntu Ubuntu 10.04.1 not working

    - by Kevin
    I am trying to block an IP address from accessing my server by using iptables, but didn't succeed. Here are the commands that I used. (after these commands, I still keep seeing 50.18.12.86 sending request to my Apache server). sudo iptables -F sudo iptables -I OUTPUT -s 50.18.12.86 -j REJECT sudo iptables -I INPUT -s 50.18.12.86 -j REJECT sudo iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination REJECT all -- 50.18.12.86 0.0.0.0/0 reject-with icmp-port-unreachable Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination REJECT all -- 50.18.12.86 0.0.0.0/0 reject-with icmp-port-unreachable I have tried DROP instead of REJECT, but doesn't help.

    Read the article

  • Oracle Solaris Studio Express 6/10 and its Customer Feedback Program are now available

    - by pieter.humphrey
    Oracle Solaris Studio Express 6/10 and the Customer Feedback Program for it are now available. Oracle Solaris Studio Express 6/10 is available on Solaris 10 (SPARC, x86), OEL 5 (x86), RHEL 5 (x86), SuSE 11 (x86) today and will be available for OpenSolaris in the near future. New feature highlights since the last release include: C/C++/Fortran compiler optimizations for the latest UltraSPARC and SPARC64-based architectures such as UltraSPARC T2 and SPARC64 VII C/C++/Fortran compiler optimizations for the latest x86 architectures including the Intel Xeon 7500 processor series (Nehalem-EX) and the Intel Xeon 5600 processor series (Westmere-EP) Enhanced debugging and code coverage tooling Improved application profiling with the Performance Analyzer Updated IDE based on NetBeans 6.8 To find more information and download go to http://developers.sun.com/sunstudio/downloads/express/ To participate in the customer feedback program for Oracle Solaris Studio Express 6/10 go to http://developers.sun.com/sunstudio/customerfeedback/index.jsp Please get the word out, try out this new release and send us your feedback! Technorati Tags: developer,development,solaris,sparc,Oracle Solaris Studio,Solaris Studio,Sun Studio,oracle,otn del.icio.us Tags: developer,development,solaris,sparc,Oracle Solaris Studio,Solaris Studio,Sun Studio,oracle,otn

    Read the article

  • Best approach for utility class library using Visual Studio

    - by gregsdennis
    I have a collection of classes that I commonly (but not always) use when developing WPF applications. The trouble I have is that if I want to use only a subset of the classes, I have three options: Distribute the entire DLL. While this approach makes code maintenance easier, it does require distributing a large DLL for minimal code functionality. Copy the classes I need to the current application. This approach solves the problem of not distributing unused code, but completely eliminates code maintenance. Maintain each class/feature in a separate project. This solves both problems from above, but then I have dramatically increased the number of files that need to be distributed, and it bloats my VS solution with tiny projects. Ideally, I'd like a combination of 1 & 3: A single project that contains all of my utility classes but builds to a DLL containing only the classes that are used in the current application. Are there any other common approaches that I haven't considered? Is there any way to do what I want? Thank you.

    Read the article

  • tightvncserver on ubuntu 12.04 server with ubuntu-desktop installed no unity

    - by Leon
    The tight vnc server is running but unity does not get loaded. I changed the xstartup to: unset SESSION_MANAGER . /etc/X11/xinit/xinitrc [ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup [ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources gnome-session & But still no unity. In wich log file can I look for the errors containing the starting of tightvncserver in combination with gnome and unity? Can somone point me at documentation abou tthe loading/starting sequence of Xserver, windows manager etc.? Is this a known issue?

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >