Search Results

Search found 4343 results on 174 pages for 'verizon wireless'.

Page 54/174 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• Internet on Ubuntu 12.04 stopped to work after installing updates from the update manager

  - by roman sukhanov

  I have wireless Internet access and it worked well on Ubuntu 12.04 LTS until today, when I installed updates from the Update Manager. After the reloading of the computer the sign of Internet disappeared and the Internet connection stopped working. I went to the Network section of the System settings and got such a message: The system network services are not compatible with this version. ping 8.8.8.8 gives the result Network is unreachable. What should I do?

  Read the article

• MacBook Pro 8.2 wifi keeps disconnecting, Ubuntu 12.04

  - by Sean Isley

  I am using a MacBook Pro 8.2 with Ubuntu 12.04, and my wifi disconnects consistently. I followed the directions as detailed here here, however, and it works up to expected speeds, but after within an hours time, the wifi disconnects and the only way to solve the issue is to either reboot OR disable wireless and re-enable it. lsmod | grep cfg80211 outputs: cfg80211 178818 2 b43,mac80211 I suspect that I did not blacklist the correct driver and there are two drivers causing instability, however I have no idea if I actually did it correctly.

  Read the article

• ath9k driver does not weak up

  - by shantanu

  I know this is common question but i found no suitable answer, so i am asking this again. I installed ubuntu 11.10. I found the bug for ath9k, so set first network boot from BIOS menu. That's worked. I have upgraded to 12.04 yesterday. Now ath9k is creating problem again. First network boot is still enable. ath9k works at start. But failed(connect again and again) after couple of minutes. dmesg show error that it can not weak up in 500us. So i tried #compat-wireless-3.5.1-1. But result is same. I have also added #nohwcrypt=1 option in /etc/modeprob.d/ath9k.conf. Still no luck. I tried #rmmod and then modprobe sudo modprobe ath9k nohwcrypt=1 dmesg shows me error: [ 400.690086] ath9k: Driver unloaded [ 406.214329] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 406.214348] ath9k 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 406.214368] ath9k 0000:06:00.0: setting latency timer to 64 [ 406.428517] ath9k 0000:06:00.0: Failed to initialize device [ 406.428852] ath9k 0000:06:00.0: PCI INT A disabled [ 406.428887] ath9k: probe of 0000:06:00.0 failed with error -5 dmesg error when driver fail: 355.023521] ath: Chip reset failed [ 355.023524] ath: Unable to reset channel, reset status -22 [ 355.023556] ath: Unable to set channel [ 355.088569] ath: Failed to stop TX DMA, queues=0x10f! [ 355.122708] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff [ 355.122714] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up [ 355.263962] ath: Chip reset failed [ 355.263966] ath: Unable to reset channel (2437 MHz), reset status -22 [ 358.996063] ath: Failed to wakeup in 500us [ 364.004182] ath: Failed to wakeup in 500us I can not install fresh ubuntu because i have lots of application installed. System : Acer Aspire 4250 AMD dual core 1.6GHZ Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) EDITED Now i am in serious problem. No wifi device is not showing in ifconfig or lshw commands. Only ether-net interface shows. I tried (FN + WIFI) several times to enable the device but nothing helps. Now I have installed fresh ubuntu 12.04. Please help lshw -c network: *-network description: Ethernet interface product: 82566DC Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 02 serial: 00:19:d1:7a:8e:f9 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.0.0-k duplex=full firmware=1.1-0 ip=192.168.1.114 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:90300000-9031ffff memory:90324000-90324fff ioport:20c0(size=32) rfkill command does not show anything but no error.

  Read the article

• Broadcom BCM4331 not working on new Mac Mini 5,1

  - by Jon

  I can't seem to get my wireless card working on my Mac Mini 5,1. Lspci returns: 03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev 02) But running "additional drivers" doesn't detect anything. The nm-applet menu reads "device not ready--firmware missing." What can I do to get this to work? Note, this is with 12.04.1, so many of the previous discussions (for 11.10, etc) probably don't apply here.

  Read the article

• Cannot connect to the Internet

  - by Pratap

  My desktop has Broadband wired connection - shows connected, but unable to load any web page in Ubuntu 12.04 but works fine with Windows 7. My laptop - wireless connection shows connected, but again does not load any web page. Please help. On running sudo dhclient eth1 on my laptop there is no result - see the screen output:prajna@LAPTOP:~$ sudo dhclient eth1 [sudo] password for prajna: prajna@LAPTOP:~$ sudo dhclient eth1 [sudo] password for prajna: after giving password - some time later the screen comes back to prajna@LAPTOP:~$

  Read the article

• How to get D-Link DWA-547 working on Ubuntu 13.10?

  - by Tan Kah Ping

  I got a D-Link DWA-547 Wifi card which is supposed to work out-of-the-box with Linux. Says so here: http://wireless.kernel.org/en/users/Drivers/ath9k/products/external While lspci does list the device, NetworkManager doesn't seem to allow me to configure Wifi. lsmod also shows that ath9k isn't loaded. Manually loading with 'modprobe ath9k' doesn't help. How do I get this card working on Ubuntu 13.10 64-bit?

  Read the article

• Packard Bell TK11 Wifi not working (Ubuntu 12.10)

  - by Ingmar

  Hardware: Packard Bell EasyNote TK11BZ, BIOS version 1.15 Broadcom BCM43227 802.11 b/n/g Problem: Everything works as it should, except the wireless connection. The Wifi device is enabled in the "Additional Drivers" section of Software Sources, but does not even show up in the network manager drop-down. sudo lshw -C network: *-network UNCLAIMED description: Network controller product: BCM43227 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0100000-f0103fff

  Read the article

• hotspot in ubuntu 12.10 using hostapd unable to connect other devices

  - by MuffinStateWide

  I've created a hotspot using hostapd ad I cant connect any other device to it.all i get are a mixture of 3 errors unable to connect to kernel driver unable to set beacon parameters (which are set in my config file) or I get stuck at the authentication stage and it times out I'm using a TP-Link wireless N PCI card WN-951N (which does not support master mode) and the version provided by ubuntu in the repos. ps. this setup worked flawlessly in 12.04 LTS Any extra information, just let me know and i'll get it to you ASAP

  Read the article

• Ubuntu 13.10 - Wifi not re-connecting after suspend

  - by Matthew

  I upgraded the other day from Ubuntu 13.04 to 13.10 on my ZaReason laptop, and the WiFi doesn't reconnect after suspend. In 13.04, pressing Fn+F2 turned network connections back on after suspend. The 'soft' wireless hardware switch. But in 13.10, that doesn't work, and trying to enable networking in the networking menu doesn't work either. So I have to restart every time. Any suggestions to make it work?

  Read the article

• WIfi Problems Ubuntu 13.10

  - by user289429

  i've been searching the forums for two days now but none of the answers seems to work for me. I have an acer extensa 5630 which has an Intel WIfi 5100. But even when i am right next to my router i cannot detect the wireless network. The weird thing is, that when i create a hotspot from my mobile phone it automatically detects it and connects to it.I think i do have the correct drivers installed. Thanks

  Read the article

• Is there a way to get my NETGEAR N900 to work with ubuntu?

  - by user208088

  I'm using a NETGEAR N900 USB Wireless Adapter to pick up our home network connection while running Windows 7. I have Ubuntu 12.04.3 running on a second hard drive in my computer that is not compatible with my adapter. I'm not very familiar with how to work around in Ubuntu yet and this is the only thing keeping me from using it. I've seen this asked before but the instructions were very confusing to me! Help is appreciated

  Read the article

• WiFi on Ubuntu 12.04 custom: downloading unbearably slow

  - by Mark

  iwconfig reports 11 Mbps, yet I've seen as low as <1 KBps. This is the latest in my laundry list of Ubuntu problems in a dual-boot machine (cyberpowerpc custom, intel i7-3820, nvidia gtx 570). I received it two days ago, Windows 7 running fine, still having problems with Ubuntu. The browsing is intermittent but unacceptable. e.g. I could get to this site last night but I couldn't post this question. The downloading is unbearably slow, I can't download anything or install any packages because the speed is so slow. e.g. I am trying to install vim which is inexplicably missing from my 12.04 install (add another one to the problems list) and my download speed reported in the terminal was 241 B/s. Yes, bytes. iwconfig reports 11 Mbps, which further adds to the confusion. User@ubuntu:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:39:76:2C:A1 Bit Rate=11 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:54 Invalid misc:18 Missed beacon:0 eth0 no wireless extensions. Any ideas? I see this is a problem a lot of people, but none of the on line solutions have worked for me so far. e.g. one site recommends editing the ath9k.conf file in /etc/modprobe.d, yet this file isn't even in the folder: User@ubuntu:/$ cd etc/modprobe.d User@ubuntu:/etc/modprobe.d$ ls alsa-base.conf blacklist-oss.conf blacklist-ath_pci.conf blacklist-rare-network.conf blacklist.conf blacklist-watchdog.conf blacklist-firewire.conf dkms.conf blacklist-framebuffer.conf nvidia-current_hybrid.conf blacklist-modem.conf nvidia-graphics-drivers.conf I think the nvidia gpu might be mucking things up. I had the "blinking cursor" problem when installing in the first place, and then I had the monitor out of range problem as well. I have my faithful Asus laptop, which is running Ubuntu 12.04 just fine. The only difference is executing host -t SOA local in the terminal gives User@ubuntu:~$ host -t SOA local local has SOA record local. nobody.localhost. 42 86400 43200 604800 10800 in my new machine, and the command reports Host local. not found in the laptop. Help would be most welcome, as I am in danger of reverting back to Windows. I'm seriously considering it. Sorry for the length, trying to show my effort in resolving the issue and include terminal snippets that might be helpful.

  Read the article

• why there is a lot change in the hardware support features in different linux os?

  - by TrazerWalker

  i am using lenovo b460 with 3 GB ram and 500 GB hard disk,(no graphics card). when i live boot Linux mint i was able to connect to WiFi.but when i booted up Ubuntu 11.4 i was not able to connect through WiFi.then later i installed Ubuntu 12.4 and then i got connected with WiFi, but after installing icons and themes through my unity i am not able to view the content in the terminal and the WiFi is also not connecting now even after i changed them all back. wireless connectivity

  Read the article

• How do I install Inventel UR056g usb wifi?

  - by kuberprok

  I am am using a Inventel UR054g (R01) usb wireless adaptor on my desktop. I had quite trouble setting it up but after installing ndiswrapper and prism2 drivers I got it up and running. However, I need to run in the command line the following to get it started; sudo dhcpcd wlan0 I want this top start automatically when I restart the PC. Further, I aslo want this connection to be available to other users. Any help would be appreciated.

  Read the article

• Use MacBook Pro airport for injection with kismac

  - by Am1rr3zA

  Hi, I want use kismac to break my WEP wireless password with my MacBook Pro but when I go to step that want to inject packets it's doesn't do anything! I some where read that MacBook Pro wireless cards don't support injection! Is that right? How can I solve this? If I must buy USB Wireless Modem which one is better ?

  Read the article

• Router's ssid changes from infrastructure to ad-hoc

  - by waldo

  For a period of time the router's ssid is shown (on various computers) as a normal infrastructure network - computers connect fine and everything works however after a few minutes / hours all computers see the same ssid as an ad-hoc network (not infrastructure). At this point a computer that was already connected continues to work - a computer that isn't cannot connect. Rebooting the router temporarily restores the visibility of the correct infrastructure ssid. Is something interfering? Connecting computers: macbook (2009), iphone 3g, windows vista desktop, windows xp desktop. Details: - D-Link DSL-2740B router set to WPA2-PSK (Personal) - Enable Wireless : Yes - Wireless Network Name (SSID) : ###### - Country : Australia - Wireless Channel : 1 - 802.11 Mode : Mixed 802.11n, 802.11g and 802.11b - Channel Width : Auto 20/40 MHz - Transmission Rate : Best (automatic) - Hide Wireless Network : No - Group Key Update Interval : 0 (seconds)

  Read the article

• Access points fighting for dominance?

  - by Phillip Oldham

  We have a small office with a large number of wireless devices (a mixture of desktop machines, laptops, and wifi-enabled phones) all working from a single Apple Airport Extreme which extends our wired network. I've added another Airport Extreme for resiliency, since we've been seeing a decrease in performance and (as far as I understand) access points can only handle a small number of clients. I set the new AP to extend the current network so that the clients weren't constantly switching between different wireless networks, however as soon as this AP was configured all the wireless devices started seeing network trouble, flicking on and off. I'm assuming that this is because both APs are reasonably strong, and the client can't decide which to use. What is the best route to follow to resolve this? What I'm aiming for is wireless resiliency; preferably having two APs share the network load, or if this isn't an option then having a primary AP with a "fail-over", should the primary go down for any reason.

  Read the article

• Turning off the wi-fi functionality of a Netgear WNR2000

  - by indyK1ng

  Hello all, So my school has set up a ton of wireless access points and now they want me to turn off the wireless functionality of my router. I have a Netgear WNR2000 and I can't find the option to turn off the wireless. Thank you for your help

  Read the article

• Bridging networks problems

  - by Eric

  In my setup I have 3 computers and 2 (wireless d-link) routers. Computer1 has ethernet and wireless interfaces ethernet : 192.168.0.x (DHCP) wireless : 192.168.10.254 (static) Computer 2 has ethernet with two ips ethernet1 : 192.168.0.90 (static) ethernet2 : 192.168.10.110 (static) Computer 3 is a particular device with a hardcoded ip that I can't change wireless : 192.168.10.41 (static) Router1 manages internet and DHCP for network 192.168.0.0/24 Router2 is more complicated. I don't use DHCP. I use it to bridge between both networks. Its static ip is 192.168.10.1 Computer1 can ping Computer2. Computer1 can ping Computer3. Computer1 can ping Router1. Computer1 cannot ping Router2. Computer2 cannot ping Computer3. Computer2 can ping Router2. Router1 can ping Router1 Router2 can ping Computer2 Router2 cannot ping Computer1 Router2 cannot ping Computer3 This is very weird. Router2 manages the wireless connection, it should be able to ping its own computers right? My question is obviously : How can I make it so Computer2 can access everything else. This is a traditional case of "it was working before christmas and now it doesn't". The ethernet wiring is as follow : [ Computer1 ]----[ Router1 ]---[ Router2 ]---[ Computer3 ] I am using switch (lan) ports on Router1/2.

  Read the article

• Can I use an apple airport express as a wired bridge?

  - by Chris

  I have a wireless network using an Apple Airport extreme. That device is set up in my office and hooked up to the cable modem. I have a TV in another room which can accept a wired internet connection (not wireless enabled). Can I use an Apple airport express's ethernet jack to create a wireless to wired bridge? If not what device would I use to do the same thing?

  Read the article

• Windows 7/8 can't connect to an N Router

  - by xenoterracide

  I have a router running OpenWRT backfire, with N and A/B/G being broadcast. A linux laptop, and a Mac laptop can see the N network and connect to it (or at least they could last weekend). But there is now a Windows 7 Desktop with a B/G/N wireless card, and a Windows 8 Laptop with a B/G/N wireless card that can't see the N network only the B/G broadcast. The B/G and N have different SSID's and Encryption ( WEP and WPA2 PSK respectively ). The N SSID isn't even visible. Does anyone have any suggestions as to how to troubleshoot further? Or what might be the cause? update wireless info Desktop Dell Wireless 1502 802.11b/g/n Atheros Communications Inc 9.2.0.412

  Read the article

• Network configuration with limited hardware

  - by Pavel

  I have cable internet and I have two PC. One of them has wireless and ethernet, the other pc has ethernet only. Also, I have a dsl modem that has wireless builtin (some common speedstream model). My goal is to connect all of them so that both have internet access. As I understand, I have two options: connect speedstream to the cable and then connect other PC's to speedstream; OR, connect pc with wireless to the cable and then connect the other pc that has ethernet only using ethernet+wireless through speestream. First one seems to be easy, but it doesn't seem to work. What about the other choice? Is it possible to do it?

  Read the article

• How do I turn a Wi-Fi "hotspot" into a local wired network?

  - by Max Schmeling

  Here's the situation: In a remote "office" I have a computer with no network connection, that I need to network with when I'm at this remote office. There is a wireless network where this computer is, but no wireless adapter in the computer. I have a laptop running Windows 7 that can connect to the wireless, and the computer is running Windows Vista. What is the best way to get them both connected? I know I can buy a USB wireless adapter or something for the computer, but is there an easy way to do it with what I've got?

  Read the article

• How can I access my external hard drive wirelessly from my laptop?

  - by leora

  My desktop crashed so I am migrated over to a laptop. I have wireless in my home so i am trying to be able to use to laptop in any room without any other connections (wireless printer, wireless mouse, etc) The one issue i have is that my desktop had 2 external hard drives (USB) connected to them and i am trying to figure out the best way to treat these as external drives without having to plug them into the laptop directly. My external hard drive is the Western Digital WDH1U5000N 500GB and my laptop is a Dell D620.

  Read the article

• Windows 7 unidentified network (or limited access) after hibernate.

  - by null

  My windows 7 network will show limited access or unidentified network after coming up from hibernation. In the office I normally use LAN connection, I turn-off my wireless card (DELL Latitude has on/off switch for the wireless card). When I back at home I will turn on the wireless card, but it will take about 15 seconds to detect my home WIFI and then show limited access. I will have to restart the notebook and it will be able to connect to my WIFI and internet. The problem will be solved if I restart the notebook, but that defeats the purpose of hibernation doesn't it? I have tried uninstalling the wireless card driver but still does not solve it. I also tried updating my network card driver but windows says I am using the latest driver. On support.dell.com also showing I am using the latest driver.

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >