Search Results

Search found 2441 results on 98 pages for 'vmware thinapp'.

Page 54/98 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• Can you run Snow Leopard Server on a VM?

  - by Crash893

  I'm thinking of buying a mac mini server for my email needs (small office server for 999 with all the features i want build in) I wanted to give it a test drive before i commit so i was thinking "hey this sounds like the perfect job for a vm" however i havent been able to see any examples of running snow lepoard server on a vm does anyone know if its possible and/or there is a premade vm package to test it out with?

  Read the article

• Windows Terminal Server: occasional memory violation for applications

  - by syneticon-dj

  On a virtualized (ESXi 4.1) Windows Server 2008 SP2 32-bit machine which is used as a terminal server, I occasionally (approximately 1-3 event log entries a day) see applications fail with an 0xc0000005 error - apparently a memory access violation. The problem seems quite random and only badly reproducable - applications may run for hours, fail with 0xc0000005 and restart quite fine or just throw the access violation at startup and start flawlessly at the second attempt. The names of executables, modules and offset addresses vary, although a single executable tends to fail with same modules and the same memory offset addresses (like "OUTLOOK.EXE" repeatedly failing on module "olmapi32.dll" with the offset "0x00044b7a") - even across multiple user's logons and with several days passing without a single failure inbetween. The offset addresses seem to change across reboots, however. Only selective executables seem affected by the problem, although I may simply not be seeing a sufficient number of application runs from the other ones. I first suspected a possible problem with the physical machine's RAM, but ruled this out as a rather unlikely cause - the memory comes with ECC and I've already moved the virtual machine across several times, without any perceptable change. I've seen that DEP was enabled in "OptOut" mode on this machine: C:\Users\administrator>wmic OS Get DataExecutionPrevention_SupportPolicy DataExecutionPrevention_SupportPolicy 3 and tried changing the policy to OptIn via startup options: bcdedit.exe /set {current} nx OptIn but have yet to see any effect - I also would expect Outlook 12 or Adobe Reader 9 (both affected applications) to play well with DEP. Any other ideas why the apps may be failing?

  Read the article

• Nexus 1000v VEM fails on 2 out of 8 hosts.

  - by cougar694u

  I have 8 ESXi hosts. I do a fresh install from the installable CD directly to 4u1. We have another 2-node cluster with a working Nexus 1000v primary & secondary. Everything's up and running. I installed 6 hosts and everything worked great, migrated them to the Nexus DVS, and VUM installed the modules. I did the 7th host, and when I tried to migrate it to the DVS, it failed with the following error: Cannot complete a Distributed Virtual Switch operation for one or more host memebers. DVS Operation failed on host , error durring the configuration of the host: create dvswitch failed with the following error message: SysinfoException: Node (VSI_NODE_net_create) ; Status(bad0003)= Not found ; Message = Instance(0): Inpute(3) DvsPortset-0 256 cisco_nexus_1000v got (vim.fault.PlatformConfigFault) exception Then, I tried to do host 8, and got the exact same problem. It worked about 15 minutes prior when I did host 6, nothing changed, then went to host 7 and it failed. If I try to remediate either of these two hosts, either patches or extensions, it fails. Anyone else have these problems?

  Read the article

• Can single ESXi host make use of two separete iSCSI box?

  - by user71061

  Hi! I have problem with using multiply iSCSI targets with single ESXi host (in my case they are two FreeNAS hosts, but I suspect that this problem will occur with any two iSCSI box of that same type/model). If I configure two FreeNAS hosts as iSCSI targets (say iSCSI A and iSCSI B), then I can use both of them with my ESXi host, but only one at a time (i.e only iSCSI A or only iSCSI B, but not both of them simultaneously). If I try to add second iSCSI target to my iSCSI adapter (of course it has unique iqn name), then in a details pane of this adapter (it is iSCSI software adapter), I see that total number of paths has increased accordingly, but not total number of devices (so I can't use it as another storage). What should I do? It is impossible to attach two iSCSI targets to single adapter? I'm using free version of ESXi 4.1. Maybe it is an limitation of free version? Thanks in advance for any sugestion.

  Read the article

• Monitor LSI 3ware raid controller on ESXi

  - by aseq

  This concerns a server that runs ESXi (v. 4.x or 5.x) installed on drives that are configured into a raid10 using an LSI 3ware 97050 raid controller. I would like to know if there is a way to monitor the LSI 3ware series of controllers, in particular the 9750, through ESXi. And to hopefully also run the monitoring daemon LSI provides. I know you can set up a cronjob to execute tw_cli through ssh on the ESXi server. However that's not really ideal. I am not using vcenter by the way. It would be nice to have more than just monitoring working, since the 3ware software has a very useful web client, besides tw_cli.

  Read the article

• NAS4Free disk encryption and ZFS error

  - by MiNT

  I have installed a NAS4Free on a VM, and as recommended, i installed it on a 1GB virtual disk, and assigned another disk 500GB to this VM for file storage. I have created the disk, encrypted it, created a ZFS virtual disk, and then a ZFS storage pool. Everything was working. On every restart of this VM i needed to go on and mount the encrypted drive. Recently i upgraded the host machine, and now i cant mount or make it work. I have tried removing everything and setting up from scratch everything, with the exception of formating the disk, i have used an encrypted one without formating it. Does anybody have any suggestion on how can i at least get back my data, can i mount somehow the encrypted drive even in another utility, just need to get back the data that were on it.

  Read the article

• Cannot add VMDK to VM that was cloned with FlexClone

  - by Daniel Lucas

  I have a virtual machine called VM-A with two VMDK's on volume VOL-A. Call these VMDK-1 (system) and VMDK-2 (data). I want to clone VMDK-2 and attach that clone to VM-A as a new disk, but I'm getting an error. Here are my steps: I use the following command to clone : clone start /vol/VOL-A/VMDK-2 /vol/VOL-A/VMDK-3 Run clone status which shows successful and I can see the new file in the volume In vCenter I edit the settings of VM-A and try to add VMDK-3, but get the following error: Failed to add disk scsi0:4, Failed to power on scsi0:4 I've tried adding this cloned disk to other VMs and get the same error. What could be the issue? My specs are below. NetApp FAS 2040 Data ONTAP 8.0.1 vSphere ESXi 4.1 vCenter Server 4.1 Thanks, Daniel

  Read the article

• OVF Tools error

  - by ToreTrygg

  Hello all, I am trying to use OVF tools 1.0 to create an .ovf appliance split to 4gbs. When I run the following command: ovftool --chunkSize=4gb vi://:@/?ds= e:\test\test.ovf everything starts off fine. It will got for about 15-16% then I get this message: "Error: unable to get NFC ticket for target disk". I have looked online, but cannot find anything that matches this problem. I am using Windows 2k3 as the ovf creation server, and I'm in a ESX 3.5 environment. The ovf must be split into 4gb chunks (or less) so they can be put onto DVDs. Also, when it is done it deletes the files it started to create. Any help would be greatly appreciated.

  Read the article

• OOM-Killer, jboss and kernel panic

  - by user32425

  Hi, We are running RedHat 3.4.6(x32) on VMWareEsx3.5(x64) with 6GB RAM. A few java processes(including jboss) are running in the background. The problem is that the java processes consume lots of memory, and sometimes they are killed by the OOM-killer. When OOM-killer is about to act, the free physical memory is very low 100MB-200MB, but the swap is not used (99% free). Sometimes this causes a kernel panic too. So why isn't the swap used? How to investigate this kernel panic? Is using 6GB memory on 32bit Redhat wise? Thanks

  Read the article

• Setup link aggregation and jumbo frames on VMware ESXi 4

  - by Sysadminicus

  I'm setting up an ESXi 4 server to connect to an NFS datastore. I'd like to bond two of the NICs together and use jumbo frames for the NFS connection on a private (non-management) network. I setup a new switch with the 2 NICs and am able to connect to the NFS share over it, but could use some guidance on getting jumbo frames and link aggregation/bonding/teaming working.

  Read the article

• ghettoVCB issue

  - by romgo75

  I have setup a ghettoVCB script in order to backup three VM. I put it in a crontab but I have an issue. In my backup folder I have 3 different folders, one for each VM. In each folder I have the following files: -rw-r--r-- 1 root root 1263 Mar 17 01:51 vm1-2010-03-16--2.gz -rw-r--r-- 1 root root 1263 Mar 17 00:41 vm1-2010-03-16--3.gz -rw-r--r-- 1 root root 1261 Mar 18 01:22 vm1-2010-03-17--1.gz drwxr-xr-x 1 root root 980 Mar 19 23:39 vm1-2010-03-19 The problem is the last folder. It seems that a backup didn't finish the process. When I read the logs concerning this folder I get: 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/datastore1/backup/ 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3 2010-03-19 23:00:01 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick 2010-03-19 23:00:01 -- info: CONFIG - ADAPTER_FORMAT = buslogic 2010-03-19 23:00:01 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2010-03-19 23:00:01 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2010-03-19 23:00:01 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3 2010-03-19 23:00:01 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2010-03-19 23:00:01 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2010-03-19 23:00:01 -- info: CONFIG - LOG_LEVEL = info 2010-03-19 23:00:01 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2010-03-19 23:00:01 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all http://... 2010-03-19 23:39:35 -- info: Initiate backup for vm1 2010-03-19 23:39:35 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-03-19" for vm1 Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1_1.vmdk'... ^MClone: 0% done.^MClone: 1% done.^MClone: 2% done.^MClone: 3% done.^MClone: 4% done.^MClone: 5% done.^MClone: 6% done.^MClone: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone Failed to clone disk : The file already exists (39). Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1.vmdk'... 2010-03-20 00:46:20 -- info: Removing snapshot from vm1 ... one: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone: 10% done.^MClone: 11% done.^MClone: 12% done.^MClone: 13% done.^MClone: 14% done.^MClone: 15% done.^MClone: 16% done.^MCl 2010-03-19 23:51:19 -- info: Removing snapshot from vm1 ... I can't run ghettoVCB anymore because the VM has a snapshot which has not been deleted. I know how to delete the snapshot, but I don't know why the VCB script is not able to handle rotation of the VM backups? Any ideas? Thanks!

  Read the article

• ghettoVCB issue

  - by romgo75

  Hi, I setup ghettoVCB script in order to backup 3 VM. I put it in a crontab but I have an issue. In my backup folder I have 3 different folder, one for each VM. For each Folder I have th following files : -rw-r--r-- 1 root root 1263 Mar 17 01:51 vm1-2010-03-16--2.gz -rw-r--r-- 1 root root 1263 Mar 17 00:41 vm1-2010-03-16--3.gz -rw-r--r-- 1 root root 1261 Mar 18 01:22 vm1-2010-03-17--1.gz drwxr-xr-x 1 root root 980 Mar 19 23:39 vm1-2010-03-19 The problem is the last folder. It seems that a backup didn't finished the process. When I read the logs concerned by this folder I get : 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/datastore1/backup/ 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3 2010-03-19 23:00:01 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick 2010-03-19 23:00:01 -- info: CONFIG - ADAPTER_FORMAT = buslogic 2010-03-19 23:00:01 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2010-03-19 23:00:01 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2010-03-19 23:00:01 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3 2010-03-19 23:00:01 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2010-03-19 23:00:01 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2010-03-19 23:00:01 -- info: CONFIG - LOG_LEVEL = info 2010-03-19 23:00:01 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2010-03-19 23:00:01 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all http://... 2010-03-19 23:39:35 -- info: Initiate backup for vm1 2010-03-19 23:39:35 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-03-19" for vm1 Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1_1.vmdk'... ^MClone: 0% done.^MClone: 1% done.^MClone: 2% done.^MClone: 3% done.^MClone: 4% done.^MClone: 5% done.^MClone: 6% done.^MClone: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone Failed to clone disk : The file already exists (39). Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1.vmdk'... 2010-03-20 00:46:20 -- info: Removing snapshot from vm1 ... one: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone: 10% done.^MClone: 11% done.^MClone: 12% done.^MClone: 13% done.^MClone: 14% done.^MClone: 15% done.^MClone: 16% done.^MCl 2010-03-19 23:51:19 -- info: Removing snapshot from vm1 ... I can't run anymore ghetto VCB because the VM has a snapshot which has not been deleted. I know how to delete the snapshot, but I don't know why the VCB script is not able to handle vm abckup rotate ? Any idea ? Thanks !

  Read the article

• Windows Server 2008R2 Virtual Lab Activation strategies?

  - by William Hilsum

  I have a ESXi server that I use for testing, however, I am often needing to create additional Windows Server virtual machines. Typically, if I do not need a VM for more than 30 days, I simply do not activate. However, I have been doing a lot of HA/DRS testing recently and I have had a few servers up for more than this time. I have a MSDN account with Microsoft and have already received extra keys for Windows Server 2008 R2. I am doing nothing illegal and I am sure if I asked, they would issue more - but, I do not want to tempt fate! I have got 3 different "activated" windows snapshots I can get to at any time. If I try to clone these machines, I get the usual "did you copy or move them VM" message. If I choose copy, as far as I can see, it changes the BIOS ID and NIC MACs which is enough to disable activation. If I choose move, it keeps the activation fine (obviously, I know to change the NIC MAC - I believe I can leave the BIOS ID without problems). However, either of these options keeps the same SID code for the computer and user accounts. After the activation period has expired, as far as I can see, all that happens is optional updates do not work - it seems that the normal updates work fine. Based on this, as you can easily get in to Windows when not activated without any sort of workaround, I was wondering if it is ok just to leave a machine un activated? (However, I obviously would prefer if it was activated!) Alternatively, how dangerous is it run multiple machines on a non domain environment with the same SID? I am just interested to know if anyone can recommend a strategy for me? I have only found one solution that deals with bypassing activation - I am not interested in doing anything remotely dodgy... at a stretch, I am happy to rearm (I have never needed to keep a server past 100 days), but, I would rather have a proper strategy in place.

  Read the article

• Windows activation on a Virtual Machine (Physical->VM)

  - by Daisetsu

  I backed up a number of laptops to virtual machines before they are to be re-purposed, in case I need the data at some later time. While the Physical to VM processes worked fine I am encountering issues on some of the VMs. When I boot them I get an error message saying I MUST activate windows in order to login. This is expected because the hardware changed (from physical hardware to virtualized hardware). I click the OK button and expect to be prompted with ways to activate, windows sits there for quite a while then tells me that "Windows has already been activated". I click OK at that message and get take back to the beginning where I am asked to activate Windows. I have done some fairly intensive googling but haven't been able to find a real solution. EDIT: The laptops with the issues are 2 Sony Vaios, I believe that they have the OEM version of the OS originally installed by the factory.

  Read the article

• iSCSI targets don't appear after rescan

  - by asmr

  Hi everybody, I have an Equallogic 4000PS SAN box to which I have connected 2 x ESX 4.0.0 hosts sharing the LUNs. I have an older ESX 3.5 host which I want to setup to share the same LUNs. I have setup a vmkernel port with 2 NICs attached to 2 the iSCSI switch. When I perform an iSCSI software adapter rescan, it takes a long time and it doesn't find the targets. In the ESX-3.5 host's log file I find these messages: Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.394 cpu5:1039)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.394 cpu5:1039)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.394 cpu5:1039)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.397 cpu0:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.397 cpu0:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.397 cpu0:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.442 cpu1:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.442 cpu1:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.442 cpu1:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.874 cpu3:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.874 cpu3:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.874 cpu3:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.884 cpu4:1041)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.884 cpu4:1041)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.884 cpu4:1041)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.888 cpu3:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.888 cpu3:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.888 cpu3:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.042 cpu7:1039)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.042 cpu7:1039)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.042 cpu7:1039)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.044 cpu3:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.044 cpu3:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.044 cpu3:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.045 cpu4:1041)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.045 cpu4:1041)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.045 cpu4:1041)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.308 cpu3:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.309 cpu3:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.309 cpu3:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.598 cpu2:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.598 cpu2:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.598 cpu2:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.600 cpu7:1039)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.600 cpu7:1039)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.600 cpu7:1039)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Any ideas what the problem is?

  Read the article

• Cleanup datastore

  - by minWi

  Hi folks!, I'm trying to find "orphaned" files in my datastore, not only from orphaned vms but also other files (ie. sample files, isos, anything). Is there any powershell script or something to do that? (find -mtime works, but it's not the right way) I'm using ESX3.5 Thanks!

  Read the article

• Why is the vSphere console view so slow?

  - by blade

  Hi, Why is the Console view on the vSphere client so slow? It's a real shame because it's a shame to have to establish an RDP session every time you work on one of the VMs because of the speed of the console (I saw a tool to right click and open an RDP session to a VM in vSphere Client/ESX but this was not reliable). The Workstation console view is very smooth so I'd expect the vSphere Client console view to be very smooth. Thanks

  Read the article

• iSCSI SAN Implementation with several ESXi hosts and two Equallogic SANs

  - by Sergey

  I work for a small state college. We currently have 4 ESXi hosts (all made by Dell), 2 EqualLogic SANs (PS4000 and PS4100) and a bunch of old HP Procurve switches. The current setup is very far from being redundant and fast so we want to improve it. I read several threads but get even more confused. The Procurve Switches are 2824. I know they don't support Jumbo Frames and Flow Control at the same time, but we have plans to upgrade to something like Procurve 3500yl. Any suggestions? I heard Dell Powerconnects 6xxx are pretty good but I'm not sure how they compare to HPs. There will be a 4-port Etherchannel (Link Aggregation) between the switches, and all control modules on SAN will be connected to different switches. Is there anything that will make the setup better? Are there better switches then Procurves 3500yl that cost less than 5k? What kind of bandwidth can I expect between ESXi hosts (they will also be connected to 2824 with multiple cables) and SANs?

  Read the article

• How to SSH to guest ubuntu OS in vmplayer4

  - by Grace

  I have installed vmplayer4.0.4 on Windows7, and install ubuntu12.04 as Guest OS. Basically i have two problems: Default vmplayer use NAT for network access. I could ping the guest OS from the Host OS. But how could i access the Guest OS from outside the Host OS? If i change to Bridged Mode, sure the Guest Ubuntu OS could get DHCP ip in the same subnet as Host OS. But i could not ping the Guest OS from the Host OS, or vice versa, even if i disable the iptables firewall on Ubuntu Guest OS like following: iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT I could not figure it out, could anyone help on this issue? Thanks in advance.

  Read the article

• Moving windows-2003 hdd into virtual machine - with HDD shrink

  - by jm666

  Before you vote to close as exact duplicate, please read the full question. I was already read: Can I make a virtual machine out of a Windows XP physical machine? Disk2vhd,convert my PC to Hyper-V Virtual Machine Creating a Windows Virtual PC image from a Physical machine physical machine to virtual machine and place into VirtualBox BSOD trying to migrate Windows XP from a physical to a virtual machine http://en.wikipedia.org/wiki/Physical-to-Virtual and all other similiar questions here and several external sites too Unfortunately, don't find answer for my problem. I have an physical machine with 500GB HDD, on what is installed old Windows-2003 server with one server application. The application is like the windows itself, too old, no support for it today, haven't installation media and so on.. ;( On the HDD it is used only approx. 100MB (maybe less when will delete all unnecessary files). Want convert the the machine into the VirtualBox, and the VirtualBox should run on the same machine. Is possible to do this with the next steps? I can attach another HDD (via USB or internally) Boot an live Linux from CD, mount HDDs Run "something" on the Linux (the above wikipedia article have many pointer for the SW) for the conversion and store the image on the USB HDD - unfortunately, many of tools uses some specialty what exists in Windows-XP and above. No informations about Windows-2003 server, so what is an working solution for Windows-2003? try boot the virtual image with VirtualBox when it will run ok, remove the old installation, install Linux on the old 500GB hdd, copy the image and run.. The above should works (i hope), but the problems: i currently have only 320GB external USB hdd. (ofc, i can remove it from a box and enter it as internal HDD too) so, for the conversion I looking for the on the fly HDD shrink, so while moving the physical 500GB HDD need shrink it into smaller HDD - as i told above, only 100MB is used Exists something for this? (free) - or the only way is buying and larger 1TB hdd and using it for the conversion? Another question are: is anybody have real experience with windows-2003 conversion into VirtualBox? Looking for an answer from someone who really doing it and can figure out real pitfalls. (googling can do myself). exists here better approach for the solution?

  Read the article

• ISA 2006 Ent with NLB configuration

  - by Nagori

  Hello We have created to virtual machines and installed ISA 2006 Ent and enable NLB configuration, each machine has two NIC one connected to LAN and other connected to DMZ, we are not able to ping DMZ subnet IP of ISA from another machine which is on same DMZ subnet even though we have diable the all ISA services (including firewall). But we can ping LAN IP from all our internal subnets and this ping is working with ISA services are started or stop status Thank you

  Read the article

• Using mixed disks and OpenFiler to create RAID storage

  - by Cylindric

  I need to improve my home storage to add some resilience. I currently have four disks, as follows: D0: 500Gb (System, Boot) D1: 1Tb D2: 500Gb D3: 250Gb There's a mix of partitions on there, so it's not JBOD, but data is pretty spread out and not redundant. As this is my primary PC and I don't want to give up the entire OS to storage, my plan is to use OpenFiler in a VM to create a virtual SAN. I will also use Windows Software RAID to mirror the OS. Partitions will be created as follows: D0 P1: 100Mb: System-Reserved Boot D0 P2: 50Gb: Virtual Machine VMDKs for OS D0 P3: 350Gb: Data D1 P1: 100Mb: System-Reserved Boot D1 P2: 50Gb: Virtual Machine VMDKs for OS D1 P3: 800Gb: Data D2 P1: 450Gb: Data D3 P1: 200Gb: Data This will result in: Mirrored boot partition Mirrored Operating system Mirrored Virtual machine O/S disks Four partitions for data In the four data partitions I will create several large VMDK files, which I will "mount" into OpenFiler as block-storage devices, combined into three RAID arrays (due to the differing disk sizes) In effect, I'll end up with the following usable partitions SYSTEM 100Mb the small boot partition created by the Windows 7 installer (RAID-1) HOST 50Gb the Windows 7 partition (RAID-1) GUESTS 50Gb Virtual machine Guest VMDK's (RAID-1) VG1 900Gb Volume group consisting of a RAID-5 and two RAID-1 VG2 300Gb Volume group consisting of a single disk On VG1 I can dynamically assign storage for my media, photographs, documents, whatever, and it will be safe. On VG2 I can dynamically assign storage for my data that is not critical, and easily recoverable, as it is not safe. Are there any particular 'gotchas' when implementing a virtual OpenFiler like this? Is the recovery process for a failing disk going to be very problematic? Thanks.

  Read the article

• Can't login to just installed view administrator

  - by matarvai81

  Hi, we are starting to test View for our purposes. I have created new test enviroment, new vdidemo active directory, new virtual center etc... I just installed view connection server component to new server and trying to do initial configuration, but when trying to log in I get following error " Error accessing the View Administrator. Contact the system administrator" Log file says following error 08:14:08,925 INFO LoginBean User administrator has failed to authenticate to View Administrator What is causing this problem? How can I log in and start to test VDI?

  Read the article

• No compatible network card

  - by sbintcliffe

  Motherboard: Asus K8N-E Deluxe with onboard NIC (nVidia nForce) Secondary NIC: I've tried using a standard NIC (Device Manager displays this as D-Link DFE-538TX 10/100, but under manufacturer in the General tab of the properties in Windows it states Realtek Semiconductor Corp.) I have downloaded ESXi 4.0.0 build 208167 and cooked to disc. I've booted from it, the .TGZ modules load from the yellow and grey screen, the progress bar reaches to about 60% and like a second later the screen changes and I have the following information on screen; "No compatible network adapter found. Please consult the HCG." I've checked the HCG and found that my motherboard is listed. I also get the same message with the secondary NIC. Any ideas please?

  Read the article

• Esx servers in a DMZ

  - by James

  I have two ESX 3.5 servers in a DMZ. I can access these servers on any port from my lan via a VPN. Servers in the DMZ are unable to initiate connections back to the lan, for obvious reasons. I have a vCenter server on my lan and can initially connect to the esx servers fine. However the esx servers then try to send a hearth beat back to the vCenter server on udp/902 obviously this will not get back to the vCenter server, which then marks the ESX servers as not responding and disconnects. There are two broad solutions I can think of; 1) Try to tell vCenter to ignore not getting heart beats. The best I can do here is delay the disconnect by 3 mins. 2) Try some clever network solution. However again I am at loss. Note: The vCenter server is on a lan, and cannot be given a public IP, so firewall rules back will not work. And also I cannot setup a VPN from the DMZ to the lan. **I am adding the following, explanation that I added to the comments Ok maybe this is the bit that I not explaining well. The DMZ is on a remote site, an entirely independent network (network 1). The vCenter server is on our office lan (network 2). Network 2 can connect to any machine on any port on network 1. But network 1 is not allowed to initiate a connection to network 2. Any traffic destined to network 2 from network 1 gets dropped by the firewall as it is traffic to a non-routable address. The only solution I can think of is setting up a VPN from network 1 to network 2, but this is not acceptable So any clever folk out there any ideas? J

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >