Search Results

Search found 17314 results on 693 pages for 'vpn setup'.

Page 54/693 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • Ubuntu 12.04.1 Setup doesn't detect Windows 7 partition

    - by Dom
    I'm not really that of a linux pro, more of a noob. But i can handle console operations. Well, this is my system: ASUS ZenBook Prime UX31A 256 GB ADATA MX11 SSD Intel Core i5-3317U (Ivy-Bridge) I have a fresh installation of Windows 7 Ultimate (not activated) on a 90 GB NTFS Partition on my SSD, the rest is unassigned. I want to install Ubuntu 12.04.1 from an USB Stick (no CD-Drive...) created with Universal USB Installer 1.9.1.1. However I'm not givven the option 'Install alongside Windows', and when i choose 'other' it shows that 256 GB of 256 GB are unassigned (free) Memory. os-prober gave me: /dev/sda1/:Windows 7 (loader):Windows:chain I also tried: sudo dmraid -rE and: sudo apt-get remove dmraid with no success... How can I install Ubuntu alongside Windows? Thanks very much in advance!

    Read the article

  • Script to setup ubuntu as a wireless accesspoint on a bridge mode

    - by nixnotwin
    I use the following script to make my netbook a full-fledged wireless accesspoint. It creates a bridge with eth0 and wlan0 and starts hostapd. #!/bin/bash service network-manager stop ifconfig eth0 0.0.0.0 #remove IP from eth0 ifconfig eth0 up #ensure the interface is up ifconfig wlan0 0.0.0.0 #remove IP from eth1 ifconfig wlan0 up #ensure the interface is up brctl addbr br0 #create br0 node hostapd -d /etc/hostapd/hostapd.conf > /var/log/hostapd.log & sleep 5 brctl addif br0 eth0 #add eth0 to bridge br0 brctl addif br0 wlan0 #add wlan0 to bridge br0 ifconfig br0 192.168.1.15 netmask 255.255.255.0 #ip for bridge ifconfig br0 up #bring up interface route add default gw 192.168.1.1 # gateway This script works efficiently. But if I want to revert back to use Network Manager, I cannot do it. The bridge simply cannot be deleted. How can I modify this script so that if I run bridge_script --stop, the bridge gets deleted, network manager starts and interfaces behave as if the machine had a fresh reboot.

    Read the article

  • How to Setup Network Link aggregation (802.3ad) on Ubuntu

    - by Sysadmin Geek
    Do you need to pump large amounts of data to a multitude of clients simultaneously, while only using a single IP address? By using “link aggregation” we can join several separate network cards on the system into one humongous NIC. Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Super-Charge GIMP’s Image Editing Capabilities with G’MIC [Cross-Platform] Access and Manage Your Ubuntu One Account in Chrome and Iron Mouse Over YouTube Previews YouTube Videos in Chrome Watch a Machine Get Upgraded from MS-DOS to Windows 7 [Video] Bring the Whole Ubuntu Gang Home to Your Desktop with this Mascots Wallpaper Hack Apart a Highlighter to Create UV-Reactive Flowers [Science]

    Read the article

  • How do i make/setup a mailing list?

    - by acidzombie24
    I know i could program it myself but maybe there is a simple (thats the keyword) package. I like to add a box, snippet, form or page to my site for users to input their email address. Then i'd like it to automatically send email saying you have successfully subscribe. I'd want an unsubscribe link and i would be using smtp on google apps. I would like to send email with html so i can have a simple sentence with a complex link such as this I dont know if i'll get marked as spam if i try to send everyone an email at once? so i'd like the software to manage it. Also i'd like to get the emails in a simple format like csv. Is there a simple app that does this? if not i can write a simple form which does a simple insert (or delete when unsubscribing) and write a 200-300line app to send my emails out for me.

    Read the article

  • DRBD and MySQL - Virtualbox Setup

    DRBD is a Linux project that provides a real-time distributed filesystem. Sean Hull demonstrates how to use Sun's virtualbox software to create a pair of VMs, then configure those VMs with DRBD, and finally install and test MySQL running on volumes sitting on DRBD.

    Read the article

  • DRBD and MySQL - Virtualbox Setup

    DRBD is a Linux project that provides a real-time distributed filesystem. Sean Hull demonstrates how to use Sun's virtualbox software to create a pair of VMs, then configure those VMs with DRBD, and finally install and test MySQL running on volumes sitting on DRBD.

    Read the article

  • Trying to setup first DirectX project (don't understand the error) [on hold]

    - by user1157885
    I've just started learning DirectX with the book "3D Game Programming with DirectX". I just finished setting up all the paths and adding the code to the project which I think I did correctly, but I get this massive error which I don't really understand and is hard to google. Could someone tell me what it means and how to fix it? Error 1 error TRK0002: Failed to execute command: ""C:\Program Files (x86)\Microsoft DirectX SDK (June 2010)\Utilities\bin\x64\fxc.exe" /nologo /Emain /Fo "C:\Desktop\DirectX 11 Projects\box\Win32Project2\Debug\color.cso" /Od /Zi "....\Book Files\3DGameProg\DVD\Code\Chapter 6 Drawing in Direct3D\Box\FX\color.fx"". The handle is invalid.

    Read the article

  • Triple monitor setup with an ATI Radeon 4200?

    - by Ben Clapp
    I have a relatively new Powerspec computer (i5 quad core processor, about a year or two old) and just grabbed a new relatively inexpensive ($40?) graphics card. It has 1 DVI, one VGA, and one HDMI output. I have two (different type) monitors plugged into the DVI and VGA slots, and they work great. However, I cannot seem to be able to get a third monitor in the HDMI slot to work. I can see the monitor (and monitor info) show up in display settings. However, if I try to switch the monitor to 'on' and click apply, nothing happens. Anyone have the slightest idea what the problem might be? (It's a Radeon graphics card FYI; if I remember right I think it was the Radeon 4200?)

    Read the article

  • Dot Matrix printers setup...

    - by Parhs
    Hello! I am using debian which is similar to ubuntu. They have 7 dot matrix printers some very old like this one http://www.omnidatasys.net/product/desc_printer_ti880.htm which works from 1979 daily and at text is faster than many inkjects. I believe that it has his own language... Sending text to serial port (port server) prints garbage. However i think is prints only capital english up to 95 asccii and greek and the rest up to 127 i think greek capital.(special chip ) Sending english capital letters prints garbage i think but i amnt sure... i will try again... The other printer are ESC/P compatible and i use generic epson driver provided from ghostscript... However i think that sending text via lp -dpr1 filename It prints the text as a grafic...Changing from printer font face(courier,times roman etc) or pitch has no effect... I am wondering if is there any work arround for this? In AIX they claim that lp command printed output as text as it prints and cobol programs send raw text to to lp printers . However in AIX they use some custom filters for the printers and has more options for dot matrix printers.. I would like to know if there is a solution for this.. To avoid graphics mode for text and change font face somehow.. The most Straight-through approach would be to use no driver ,just send ESC/P from cobol but this requires too much work... Thank you again!

    Read the article

  • What's the ideal setup for an news minisite for an app [closed]

    - by Leonardo Amigoni
    I am mobile app developer, I would like my application to check for news about new updates of the app when the user opens it. I am unfamiliar on how I would check from a server if the news are actually new or have already been read. If they have not been read, I could of course display them in the app. Can anyone point me in the right direction on how to achieve this? Something similar to an RSS feed but on mobile. Thanks

    Read the article

  • Packard Bell Easynote NJ65 not saving gamma Setup.

    - by Pablo Gomez
    Hi. There seems to be a issue with the Easynote range of PB laptops. Since Ubuntu 10.10 does not use a Xorg.conf file to save your gamma / resolution /brightness setting, everytime I turn on my laptop I have to open up a terminal window and use the x-gamma command to set it up to my personal preference. Is there a way to create a configuration file which can save that into the system everytime I load up the OS? When I used to have a Compaq Presario (an F564LA with integrated nVIDIA graphics), I could save a config. file into the system which loaded up everything on startup To those who don't know the spec's for a NJ65 laptop, I'll provide them Processor: Intel® Pentium Dual Core @ 2.2 GHZ Video: Integrated Intel® GMA 4500MHD graphics HDD: 320GB SATA RAM: 2GB DDR2

    Read the article

  • Setup DKIM (DomainKeys) for Ubuntu, Postfix and Mailman

    - by MountainX
    I'm running Ubuntu 12.04 with Postfix and Mailman. I want to set up DKIM. (DomainKeys Identified Mail, or DKIM is the successor to Yahoo's "DomainKeys". It incorporate's Cisco's Identified Mail). What are the steps for setting this up? Is opendkim recommended? The only reference I have is HowToForge, but I prefer to get help here (even if it is just a confirmation of the steps at that link). Actually, I think the info at HowToForge is outdated because it mentions dkim-filter instead of opendkim.

    Read the article

  • how to setup a webhosting site ?

    - by Thomas John
    Hi all, I have purchased a cPanel/WHM web hosting reseller account and I want to set up a site for people to set up a hosting accounts. I also would like to have a domain name registration system on the site, so people can register the domain name they would like to host with me. How can I do this? Are there any ready-made scripts available or should I create my own script using the WHM API? Thanks a lot.

    Read the article

  • How to setup ATI Mobility Radeon HD 4650?

    - by Thi An
    I'm currently using Ubuntu 12.04 64bit. After installing ATI/AMD proprietary FGLRX graphics drivers via Additional Drivers, I checked the status of my VGA card using lspci -v. Here's the output: 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI M96 [Mobility Radeon HD 4650] (prog-if 00 [VGA controller]) Subsystem: Dell Device 0456 Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at d0000000 (32-bit, prefetchable) [size=256M] I/O ports at 2000 [size=256] Memory at cfef0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at cfe00000 [disabled] [size=128K] Capabilities: Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon As mentioned in the title, my VGA card is 1GB and yet my computer only recognizes 256MB. My question is: "How to make my computer fully recognize the capacity of my ATI Mobility Radeon HD 4650 (1GB)?"

    Read the article

  • Maximized Office 2007 gets cut off on multi-monitor setup with different resolutions

    - by Adam M-W
    I've got an external monitor plugged into my laptop that I like to use for typing up documents, but I've noticed that when Word is maximized it gets cut off at where the primary monitor's bounds are. Is this a bug in Wine (i'm using version 1.3.32), or with my Window Manager (metacity with compositing enabled, version 2.34.1), with my graphics drivers (nouveau) or something else? I know that I can fix it by unmaximizing (it doesn't get cut off and I can resize to the entirety of the second monitor), but it keeps on maximizing itself as it (rightly so) knows that it should be taking up the entire screen. I don't really want to use the "Emulate a virtual desktop feature", I would prefer to find the source of this issue.

    Read the article

  • How to setup an encrypted voip structure?

    - by strapakowsky
    What is the simplest way to set up a voip structure in a Linux machine with the following features: 1) Using free software 2) For computer-to-computer calls: end-to-end encryption set by the users, unpaid, no central authority (so skype is out) 3) For computer-to-phone calls: paid or unpaid, desirable encryption on the computer side if that is even possible 4) Ability to have a number to receive calls from regular phones My research concluded that the sip protocol is the most popular. However most discussions I've read on sip are too technical and I felt it discourages the regular user who wants to just click and talk. So I put the question above and created some separate questions about privacy with sip registrars, privacy with voip suppliers, what to look for in a sip registrar, what to look for in a voip provider. As for the software, I noticed most software either don't provide encryption (eg Ekiga) or the software doesn't work nicely and the project is abandoned (eg Twinkle), so no option seemed satisfying.

    Read the article

  • Tor and Google Analytics - how to track?

    - by Jeremy French
    I make a lot of use of Google Analytics - Google has reasonable tracking for location of users so I can tell where users come from. I know it is not 100% but it gives an idea. In the wake of Prism it is possible that more people will make use of networks such as tor for anonymous browsing. I have no problem with this, people can wear tin foil hats while browsing my site for all I care, but it will lead to more erroneous stats. Is there any way to flag traffic as coming from TOR, so I can filter location reports not to include it, and to get an idea of the percentage of traffic which does use it? Has anyone actually tried this?

    Read the article

  • How to recover from terminal custom setup

    - by linq
    I installed ubuntu 12.04 and I added "Terminal" to the launcher bar, the default size of the terminal is a bit small, after some googling here is how I made the disaster change: At HUD menu, type "preference" and I see the option of Edit > preference, this is as I expected After I clicked the option, I forget the exact steps, but somehow I came to some configuration panel and there is a checkbox for terminal "custom" and I checked it now an input box is enabled and I type gnome-terminal --geometry 160x50 Now the problem comes, whenever I click the terminal button at the launcher bar, new terminal windows pops up endlessly from everywhere, I cannot do anything any more except logout or shutdown. The weird thing is, after I come back, I cannot get that Edit > preference any more when I type "preference" in HUD, I tried "Edit", "preference". To be clear, I still can use the computer as long as I do not click that terminal button, but I really want to use terminal to run commands. Help is appreciated greatly! Update - OK, figured out. Go to /home/jibin/.gconf/apps/gnome-terminal/profiles/Default and open that xml file, I can see the options I changed at the GUI, remove them and terminal runs good. The preference HUD is back also, it is actually Profile Preference and it is only available when terminal is open. Continue my ubuntu-ing...

    Read the article

  • What is correct heading setup for subpages

    - by user1010609
    What is the best for seo of the following: using <h1>keyword</h1> in layout and putting each subpage title in </h2> using <h1>keyword</h1> only for main page and on each subpage replace it to <h2>keyword</h2> and using h1 tags for subapge title not using <h1>keyword</h1> on any of the pages instead put keyword in in header and use for each subpage and using <h1>keyword + something for main page title</h1> None of the above (please go into as much details)

    Read the article

  • Openconnect problems on Ubuntu 12.04

    - by Fendrix
    Getting problems on the Ubuntu 11.04 for openconnect... the failure after connecting says: Got CONNECT response: HTTP/1.1 200 OK CSTP connected. DPD 30, Keepalive 20 Connected tun0 as 172.21.246.21, using SSL DTLS handshake failed: 2 I thought it is a kernel fault so I updated to 12.04 which didn't change the message. It could be that the vpnc-script has the problem. Is there any workaround for this issue ? I already got the vpnc package and downloaded the /etc/vpnc/vpnc-script

    Read the article

  • Ask the Readers: How Do You Browse Securely Away From Home?

    - by Jason Fitzpatrick
    When you’re browsing away from home, be it on your smartphone, tablet, or laptop, how do you keep your browsing sessions secure? This week we’re interested in hearing all about your mobile security tips and tricks. When you’re out and about you often, out of necessity or convenience, need to connect to open Wi-Fi hotspots and otherwise put your data out there in ways that you don’t when you’re at home. This week we want to hear about your tips, tricks, and applications for keeping your data secure and private when you’re away from your home network. Sound off in the comments with your tips and then check back on Friday for the What You Said roundup. HTG Explains: Why Linux Doesn’t Need Defragmenting How to Convert News Feeds to Ebooks with Calibre How To Customize Your Wallpaper with Google Image Searches, RSS Feeds, and More

    Read the article

  • Problem connecting to isp server using xl2tpd as client. Ubuntu server 13.04

    - by Deon Pretorius
    I have followed guides found on google and ubuntu support pages and can get xl2tpd connection up but only under the following conditions: 1 - ADSL model must be configured and connected to the ISP or 2 - ADSL modem in bridge mode I must have an existing PPPoe connection established. If neither of the above are active xl2tpd wont trigger pppd and connect to the isp and thus tunnel connection fails to connect to the L2TP server of the ISP. Am I doing something wrong; /etc/ppp/options.l2tpd.axxess ipcp-accept-local ipcp-accept-remote refuse-eap refuse-chap require-pap noccp noauth idle 1800 mtu 1200 mru 1200 defaultroute usepeerdns debug lock connect-delay 5000 name (name used for ppp connection) /etc/ppp/pap-secrets # * password (name used for ppp connection as above) * (ppp password supplied by isp) /etc/xl2tpd/xl2tpd.conf [global] ; Global parameters: auth file = /etc/xl2tpd/l2tp-secrets ; * Where our challenge secrets are access control = yes ; * Refuse connections without IP match debug tunnel = yes [lac axxess] lns = 196.30.121.50 ; * Who is our LNS? redial = yes ; * Redial if disconnected? redial timeout = 5 ; * Wait n seconds between redials max redials = 5 ; * Give up after n consecutive failures hidden bit = yes ; * User hidden AVP's? length bit = yes ; * Use length bit in payload? require pap = yes ; * Require PAP auth. by peer require chap = no ; * Require CHAP auth. by peer refuse chap = yes ; * Refuse CHAP authentication require authentication = yes ; * Require peer to authenticate name = BLA85003@axxess ; * Report this as our hostname ppp debug = yes ; * Turn on PPP debugging pppoptfile = /etc/ppp/options.l2tpd.axxess ; * ppp options file for this lac /etc/xl2tpd/l2tp-secrets # Secrets for authenticating l2tp tunnels # us them secret # * marko blah2 # zeus marko blah # * * interop * vzb_l2tp (*** secret supplied by isp) ^ isp server host name Any help will be greatly appreciated

    Read the article

  • Virtual Economy Setup - Virtual currencies advice

    - by Sarah Simpson
    I'm trying to figure out how to build my virtual economy. It seems like some games have one currency and some of them have up to 3 and 4 different ones. The game is an action game which is currently single player but I'm planning on adding a tournament mode that allows users to compete against each other. The virtual goods that a user would be able to purchase would be either customization to the character or powerups and utilities that give the character more abilities in the game. The character is able to gain coins during game play. The advice I'm trying to get is whether or not it makes sense to set up more than one currency and more than two currencies? What are the pros and cons? Reference to some resources that indicate research would be great.

    Read the article

  • Setup shortcut keys not working

    - by Tim
    In my Ubuntu 12.04, in keyboard settings, I didn't find a shortcut key for restarting X, so in "Customer Shorcut", I set up Ctrl+Alt+Backspace for command sudo restart lightdm. But after that the shortcut doesn't work. Is it because it requires root privilege? Also I have a SysRq key on my keyboard, which I think to be the "Magic SysReq Key". My SysRq key is shared with PrtSc key (for screen shoot), and is in blue which means I have to press Fn key at the same time to invoke SysRq instead of PrtSC. But every time I press Fn+SysRq, it always shoots a photo of the screen, same as just hitting PrtSc i.e. without hitting Fn. I wonder how to use the Magic SysReq Key? Does it mean the shortcut has not been linked to any command that is supposed for Magic SysReq Key yet? PS: My laptop is Lenovo T400 and OS is Ubuntu 12.04. Thanks!

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >