zend optimizer - Page 54

SQL SERVER – Weekly Series – Memory Lane – #004

- by pinaldave

Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Auto Generate Script to Delete Deprecated Fields in Current Database In early career everytime I have to drop a column, I had hard time doing it because I was scared what if that column was needed somewhere in the code. Due to this fear I never dropped any column. I just renamed the column. If the column which I renamed was needed afterwards it was very easy to rename it back again. However, it is not recommended to keep the deleted column renamed in the database. At every interval I used to drop the columns which was prefixed with specific word. This script is 6 years old but still works. Give it a look, I am open for improvements. 2007 Shrinking Truncate Log File – Log Full – Part 2 Shrinking database or mdf file is indeed bad thing and it creates lots of problems. However, once in a while there is legit requirement to shrink the log file – a very rare one. In the rare occasion shrinking or truncating the log file may be the only solution. However, one should make sure to take backup before and after the truncate or shrink as in case of a disaster they can be very useful. Remember that truncating log file will break the log chain and while restore it can create major issue. Anyway, use this feature with caution. 2008 Simple Use of Cursor to Print All Stored Procedures of Database Including Schema This is a very interesting requirement I used to face in my early career days, I needed to print all the Stored procedures of my database. Interesting enough I had written a cursor to do so. Today when I look back at this stored procedure, I believe there will be a much cleaner way to do the same task, however, I still use this SP quite often when I have to document all the stored procedures of my database. Interesting Observation about Order of Resultset without ORDER BY In industry many developers avoid using ORDER BY clause to display the result in particular order thinking that Index is enforcing the order. In this interesting example, I demonstrate that without using ORDER BY, same table and similar query can return different results. Query optimizer always returns results using any method which is optimized for performance. The learning is There is no order unless ORDER BY is used. 2009 Size of Index Table – A Puzzle to Find Index Size for Each Index on Table I asked this puzzle earlier where I asked how to find the Index size for each of the tables. The puzzle was very well received and lots of interesting answers were received. To answer this question I have written following blog posts. I suggest this weekend you try to solve this problem and see if you can come up with a better solution. If not, well here are the solutions. Solution 1 | Solution 2 | Solution 3 Understanding Table Hints with Examples Hints are options and strong suggestions specified for enforcement by the SQL Server query processor on DML statements. The hints override any execution plan the query optimizer might select for a query. The SQL Server Query optimizer is a very smart tool and it makes a better selection of execution plan. Suggesting hints to the Query Optimizer should be attempted when absolutely necessary and by experienced developers who know exactly what they are doing (or in development as a way to experiment and learn). Interesting Observation – TOP 100 PERCENT and ORDER BY I have seen developers and DBAs using TOP very causally when they have to use the ORDER BY clause. Theoretically, there is no need of ORDER BY in the view at all. All the ordering should be done outside the view and view should just have the SELECT statement in it. It was quite common that to save this extra typing by including ordering inside of the view. At several instances developers want a complete resultset and for the same they include TOP 100 PERCENT along with ORDER BY, assuming that this will simulate the SELECT statement with ORDER BY. 2010 SQLPASS Nov 8-11, 2010-Seattle – An Alternative Look at Experience In year 2010 I attended most prestigious SQL Server event SQLPASS between Nov 8-11, 2010 at Seattle. I have only one expression for the event - Best Summit Ever. Instead of writing about my usual routine or the event, I wrote about the interesting things I did and how I felt about it! When I go back and read it, I feel that this is the best event I attended in year 2010. Change Database Access to Single User Mode Using SSMS Image says all. 2011 SQL Server 2012 has introduced new analytic functions. These functions were long awaited and I am glad that they are now here. Before when any of this function was needed, people used to write long T-SQL code to simulate these functions. But now there’s no need of doing so. Having available native function also helps performance as well readability. Function SQLAuthority MSDN CUME_DIST CUME_DIST CUME_DIST FIRST_VALUE FIRST_VALUE FIRST_VALUE LAST_VALUE LAST_VALUE LAST_VALUE LEAD LEAD LEAD LAG LAG LAG PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_DISC PERCENTILE_DISC PERCENTILE_DISC PERCENT_RANK PERCENT_RANK PERCENT_RANK Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Day 5 of Oracle OpenWorld 2012 October 4th

- by Maria Colgan

Its the last day of Oracle OpenWorld and we have saved the very best for last. So hopefully you are still awake and functioning at this stage! Today, we present An Insider’s View of How the Optimizer Works (Session CON8457) at Moscone South - room 104. This session explains how the latest version of the optimizer works and the best ways you can influence its decisions to ensure you get optimal execution every time We really hope you have enjoy the conference so far and will stop by our session this afternoon before you head off home! +Maria Colgan

Read the article

Has anyone used Genetify for A/B testing

- by Joshak

I'm working on a small project that will likely run on Wordpress, I always like to run some split testing to improve conversion rates for various goals. Typically if its a small site that I either don't have a budget for or want to keep it as inexpensive as possible I use Google Website Optimizer if I do have a budget I go with Visual Website Optimizer both are great and affordable, but for fun I was checking out alternatives and found Genetify which is an open source project and has some neat features. In searching around I don't see many people talking about it and wondered if anyone here has used it. If so what do you think about it?

Read the article

PHP crashing on occasion - APC error?

- by papanel

Any thoughts on this? We've had this happen twice recently. Basically, every page throws a fatal error, fixed by an apache restart. Here's what's in the log, repeated over and over. [Tue Apr 13 15:18:12 2010] [error] [client 10.0.0.2] PHP Fatal error: Internal Zend error - Missing class information for in /www/sites/ep/vogoo/items.php on line 31 [Tue Apr 13 15:18:12 2010] [error] [client 10.0.0.2] PHP Fatal error: Internal Zend error - Missing class information for in /www/sites/ep/vogoo/items.php on line 31 [Tue Apr 13 15:18:13 2010] [error] [client 10.0.0.2] PHP Fatal error: Internal Zend error - Missing class information for in /www/sites/ep/vogoo/items.php on line 31 Looking around, this may be an issue with APC? http://pecl.php.net/bugs/bug.php?id=16120&edit=1 (We're running 3.0.19, which shows as latest stable on pecl.) Thoughts? I increased the amount of memory apc uses, but the problem just happened again.

Read the article

APC on PHP 5.4 does not seem to be installed after installation

- by Burning the Codeigniter

I've recently upgraded to PHP 5.4 from 5.3.6, I did the command apt-get upgrade php5 with the custom PHP 5.4 repo which I added to the apt-get repositories, now that I upgraded, I restarted php-fastcgi and php5-fpm the APC does not seem to be installed with it after I did pecl install apc it seems to configure and install with the details below: Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 But in my phpinfo() I get this: PHP API 20100412 PHP Extension 20100525 Zend Extension 220100525 Which I don't understand, how can I configure PECL to install with PHP 5.4 with my version, my installation with apc.so is stored to /usr/lib/php5/20090626/ however in /usr/lib/php5/ I have two PHP versions: 20090626 20100525 How can I remove either one and leave PHP 5.4 and manage it to install apc in the correct PHP version? I'm running Ubuntu 11.04 on my server. I need help on this please.

Read the article

Two components offering the same functionality, required by different dependencies

- by kander

I'm building an application in PHP, using Zend Framework 1 and Doctrine2 as the ORM layer. All is going well. Now, I happened to notice that both ZF1 and Doctrine2 come with, and rely on, their own caching implementation. I've evaluated both, and while each has its own pro's and cons, neither of them stand out as superior to the other for my simple needs. Both libraries also seem to be written against their respective interfaces, not their implementations. Reasons why I feel this is an issue is that during the bootstrapping of my application, I have to configure two caching drivers - each with its own syntax. A mismatch is easily created this way, and it feels inefficient to set up two connections to the caching backend because of this. I'm trying to determine what the best way forward is, and would welcome any insights you may be able to offer. What I've thought up so far are four options: Do nothing, accept that two classes offering caching functionality are present. Create a Facade class to stick Zend's interface onto Doctrine's caching implementation. Option 2, the other way around - create a Facade to map Doctrine's interface on a Zend Framework backend. Use multiple-interface-inheritance to create one interface to rule them all, and pray that there aren't any overlaps (ie: if both have a "save" method, they'll need to accept params in the same order due to PHP's lack of proper polymorphism). What option is best, or is there a "None of the above" variant that I'm not aware of?

Read the article

WAN Optimization for Small Office/Home Office

- by TiernanO

I have been reading up on WAN optimization for the last while, mostly out of interest of speeding up my own internet connections, but also to speed up the office internet connection. At home, I have 2 cable modems plugged into a RouterBoard RB750, which load balances the connections. In the office, we have a single connection into a NetGear router. Most of the WAN Optimization products I have seen, seem to be prohibitively expensive, but also seem to be based on the idea of having multiple branches around the world. What I am looking for, ideally, is as follows: software install: I am "guessing" I need to install it in 2 places: one in the office or house, and one in "the cloud". any connections going to, say, The US (we are in Europe, but our backup's live in the US currently, which would be something important to speed up) would be "tunnelled" though the Optimizer. If downloading or uploading large files, open multiple connections between both "the cloud" and the optimizer... This is where a lot of speed could be gained. finally, for items not compressed, they would be compressed on the cloud side of things, also items that are already on the optimizer could be not sent again. kind of like RSync or Proxy servers... So, is there something that can be done? Is it available using off the shelf components (some magic script with SSH, Squid, Linux and duct tape) or is it something that needs to be purchased? or even an Open Source Project that does 90% of what i am asking?

Read the article

C# Read a String then extract the numbers in that string.

- by microsumol

How can we get the numbers 7 and 4 and 5 from the following string: MODULE potmtpMAIN main <info: "Enterprise Optimizer 7.4 for COR Technology 5.5 -- Advanced Solver Edition", url:"http://EO.riverlogic.com", url_menu:"EO Online...", app_id:"EOAS",app_name:"Enterprise Optimizer AS", **app_major:7**, **app_minor:4**,**app_micro:5**,app_copyright:"\251 1996-2010 River Logic Inc.\r\nAll Rights Reserved."> Thank You in advance

Read the article

parse my proprietary string format

- by microsumol

How can we get the numbers 7 and 4 and 5 from the following string: MODULE potmtpMAIN main <info: "Enterprise Optimizer 7.4 for COR Technology 5.5 -- Advanced Solver Edition", url:"http://EO.riverlogic.com", url_menu:"EO Online...", app_id:"EOAS",app_name:"Enterprise Optimizer AS", app_major:7, app_minor:4,app_micro:5,app_copyright:"\251 1996-2010 River Logic Inc.\r\nAll Rights Reserved."> The search must be based on app_major: app_minor: and app_micro Thank You in advance

Read the article

PHPUnit reporting "Aborted" no matter what tests are run

- by GrumpyCanuck

Having a weird problem with PHPUnit. We're using PHPUnit as part of a continuous integration environment, that contains one app written using Zend Framework and one app written using CodeIgniter. Unit tests run just fine under Zend Framework, but whenever I run the tests for CodeIgniter using fooStack's CIUnit bridge, I always get the same problem at the end: PHPUnit 3.4.14 by Sebastian Bergmann. ............... . Time: 1 second, Memory: 7.00Mb OK (16 tests, 14 assertions) Aborted First off, I do not know what those empty spaces between the . means. Secondly, no matter what test I run (all of them or each one separately) I get the same Aborted message at the very end. The tests themselves do not contain any exit or die statements. When I run the same version of PHPUnit on my laptop (running OS-X Snow Leopard and same version of Zend Server Community Edition) I do not get that aborted message. Running PHP 5.3.2 on Ubuntu installed using Zend Server Community Edition. Any help with this would be greatly appreciated.

Read the article

PHP -- automatic SQL injection protection?

- by ashgromnies

I took over maintenance of a PHP app recently and I'm not super familiar with PHP but some of the things I've been seeing on the site are making me nervous that it could be vulnerable to a SQL injection attack. For example, see how this code for logging into the administrative section works: $password = md5(HASH_SALT . $_POST['loginPass']); $query = "SELECT * FROM `administrators` WHERE `active`='1' AND `email`='{$_POST['loginEmail']}' AND `password`='{$password}'"; $userInfo = db_fetch_array(db_query($query)); if($userInfo['id']) { $_SESSION['adminLoggedIn'] = true; // user is logged in, other junk happens here, not important The creators of the site made a special db_query method and db_fetch_array method, shown here: function db_query($qstring,$print=0) { return @mysql(DB_NAME,$qstring); } function db_fetch_array($qhandle) { return @mysql_fetch_array($qhandle); } Now, this makes me think I should be able to do some sort of SQL injection attack with an email address like: ' OR 'x'='x' LIMIT 1; and some random password. When I use that on the command line, I get an administrative user back, but when I try it in the application, I get an invalid username/password error, like I should. Could there be some sort of global PHP configuration they have enabled to block these attacks? Where would that be configured? Here is the PHP --version information: # php --version PHP 5.2.12 (cli) (built: Feb 28 2010 15:59:21) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies with the ionCube PHP Loader v3.3.14, Copyright (c) 2002-2010, by ionCube Ltd., and with Zend Optimizer v3.3.9, Copyright (c) 1998-2009, by Zend Technologies

Read the article

Using SQL Execution Plans to discover the Swedish alphabet

- by Rob Farley

SQL Server is quite remarkable in a bunch of ways. In this post, I’m using the way that the Query Optimizer handles LIKE to keep it SARGable, the Execution Plans that result, Collations, and PowerShell to come up with the Swedish alphabet. SARGability is the ability to seek for items in an index according to a particular set of criteria. If you don’t have SARGability in play, you need to scan the whole index (or table if you don’t have an index). For example, I can find myself in the phonebook easily, because it’s sorted by LastName and I can find Farley in there by moving to the Fs, and so on. I can’t find everyone in my suburb easily, because the phonebook isn’t sorted that way. I can’t even find people who have six letters in their last name, because also the book is sorted by LastName, it’s not sorted by LEN(LastName). This is all stuff I’ve looked at before, including in the talk I gave at SQLBits in October 2010. If I try to find everyone who’s names start with F, I can do that using a query a bit like: SELECT LastName FROM dbo.PhoneBook WHERE LEFT(LastName,1) = 'F'; Unfortunately, the Query Optimizer doesn’t realise that all the entries that satisfy LEFT(LastName,1) = 'F' will be together, and it has to scan the whole table to find them. But if I write: SELECT LastName FROM dbo.PhoneBook WHERE LastName LIKE 'F%'; then SQL is smart enough to understand this, and performs an Index Seek instead. To see why, I look further into the plan, in particular, the properties of the Index Seek operator. The ToolTip shows me what I’m after: You’ll see that it does a Seek to find any entries that are at least F, but not yet G. There’s an extra Predicate in there (a Residual Predicate if you like), which checks that each LastName is really LIKE F% – I suppose it doesn’t consider that the Seek Predicate is quite enough – but most of the benefit is seen by its working out the Seek Predicate, filtering to just the “at least F but not yet G” section of the data. This got me curious though, particularly about where the G comes from, and whether I could leverage it to create the Swedish alphabet. I know that in the Swedish language, there are three extra letters that appear at the end of the alphabet. One of them is ä that appears in the word Västerås. It turns out that Västerås is quite hard to find in an index when you’re looking it up in a Swedish map. I talked about this briefly in my five-minute talk on Collation from SQLPASS (the one which was slightly less than serious). So by looking at the plan, I can work out what the next letter is in the alphabet of the collation used by the column. In other words, if my alphabet were Swedish, I’d be able to tell what the next letter after F is – just in case it’s not G. It turns out it is… Yes, the Swedish letter after F is G. But I worked this out by using a copy of my PhoneBook table that used the Finnish_Swedish_CI_AI collation. I couldn’t find how the Query Optimizer calculates the G, and my friend Paul White (@SQL_Kiwi) tells me that it’s frustratingly internal to the QO. He’s particularly smart, even if he is from New Zealand. To investigate further, I decided to do some PowerShell, leveraging the Get-SqlPlan function that I blogged about recently (make sure you also have the SqlServerCmdletSnapin100 snap-in added). I started by indicating that I was going to use Finnish_Swedish_CI_AI as my collation of choice, and that I’d start whichever letter cam straight after the number 9. I figure that this is a cheat’s way of guessing the first letter of the alphabet (but it doesn’t actually work in Unicode – luckily I’m using varchar not nvarchar. Actually, there are a few aspects of this code that only work using ASCII, so apologies if you were wanting to apply it to Greek, Japanese, etc). I also initialised my $alphabet variable. $collation = 'Finnish_Swedish_CI_AI'; $firstletter = '9'; $alphabet = ''; Now I created the table for my test. A single field would do, and putting a Clustered Index on it would suffice for the Seeks. Invoke-Sqlcmd -server . -data tempdb -query "create table dbo.collation_test (col varchar(10) collate $collation primary key);" Now I get into the looping. $c = $firstletter; $stillgoing = $true; while ($stillgoing) { I construct the query I want, seeking for entries which start with whatever $c has reached, and get the plan for it: $query = "select col from dbo.collation_test where col like '$($c)%';"; [xml] $pl = get-sqlplan $query "." "tempdb"; At this point, my $pl variable is a scary piece of XML, representing the execution plan. A bit of hunting through it showed me that the EndRange element contained what I was after, and that if it contained NULL, then I was done. $stillgoing = ($pl.ShowPlanXML.BatchSequence.Batch.Statements.StmtSimple.QueryPlan.RelOp.IndexScan.SeekPredicates.SeekPredicateNew.SeekKeys.EndRange -ne $null); Now I could grab the value out of it (which came with apostrophes that needed stripping), and append that to my $alphabet variable. if ($stillgoing) { $c=$pl.ShowPlanXML.BatchSequence.Batch.Statements.StmtSimple.QueryPlan.RelOp.IndexScan.SeekPredicates.SeekPredicateNew.SeekKeys.EndRange.RangeExpressions.ScalarOperator.ScalarString.Replace("'",""); $alphabet += $c; } Finally, finishing the loop, dropping the table, and showing my alphabet! } Invoke-Sqlcmd -server . -data tempdb -query "drop table dbo.collation_test;"; $alphabet; When I run all this, I see that the Swedish alphabet is ABCDEFGHIJKLMNOPQRSTUVXYZÅÄÖ, which matches what I see at Wikipedia. Interesting to see that the letters on the end are still there, even with Case Insensitivity. Turns out they’re not just “letters with accents”, they’re letters in their own right. I’m sure you gave up reading long ago, and really aren’t that fazed about the idea of doing this using PowerShell. I chose PowerShell because I’d already come up with an easy way of grabbing the estimated plan for a query, and PowerShell does allow for easy navigation of XML. I find the most interesting aspect of this as the fact that the Query Optimizer uses the next letter of the alphabet to maintain the SARGability of LIKE. I’m hoping they do something similar for a whole bunch of operations. Oh, and the fact that you know how to find stuff in the IKEA catalogue. Footnote: If you are interested in whether this works in other languages, you might want to consider the following screenshot, which shows that in principle, it should work with Japanese. It might be a bit harder to run this in PowerShell though, as I’m not sure how it translates. In Hiragana, the Japanese alphabet starts ?, ?, ?, ?, ?, ...

Read the article

The SSIS tuning tip that everyone misses

- by Rob Farley

I know that everyone misses this, because I’m yet to find someone who doesn’t have a bit of an epiphany when I describe this. When tuning Data Flows in SQL Server Integration Services, people see the Data Flow as moving from the Source to the Destination, passing through a number of transformations. What people don’t consider is the Source, getting the data out of a database. Remember, the source of data for your Data Flow is not your Source Component. It’s wherever the data is, within your database, probably on a disk somewhere. You need to tune your query to optimise it for SSIS, and this is what most people fail to do. I’m not suggesting that people don’t tune their queries – there’s plenty of information out there about making sure that your queries run as fast as possible. But for SSIS, it’s not about how fast your query runs. Let me say that again, but in bolder text: The speed of an SSIS Source is not about how fast your query runs. If your query is used in a Source component for SSIS, the thing that matters is how fast it starts returning data. In particular, those first 10,000 rows to populate that first buffer, ready to pass down the rest of the transformations on its way to the Destination. Let’s look at a very simple query as an example, using the AdventureWorks database: We’re picking the different Weight values out of the Product table, and it’s doing this by scanning the table and doing a Sort. It’s a Distinct Sort, which means that the duplicates are discarded. It'll be no surprise to see that the data produced is sorted. Obvious, I know, but I'm making a comparison to what I'll do later. Before I explain the problem here, let me jump back into the SSIS world... If you’ve investigated how to tune an SSIS flow, then you’ll know that some SSIS Data Flow Transformations are known to be Blocking, some are Partially Blocking, and some are simply Row transformations. Take the SSIS Sort transformation, for example. I’m using a larger data set for this, because my small list of Weights won’t demonstrate it well enough. Seven buffers of data came out of the source, but none of them could be pushed past the Sort operator, just in case the last buffer contained the data that would be sorted into the first buffer. This is a blocking operation. Back in the land of T-SQL, we consider our Distinct Sort operator. It’s also blocking. It won’t let data through until it’s seen all of it. If you weren’t okay with blocking operations in SSIS, why would you be happy with them in an execution plan? The source of your data is not your OLE DB Source. Remember this. The source of your data is the NCIX/CIX/Heap from which it’s being pulled. Picture it like this... the data flowing from the Clustered Index, through the Distinct Sort operator, into the SELECT operator, where a series of SSIS Buffers are populated, flowing (as they get full) down through the SSIS transformations. Alright, I know that I’m taking some liberties here, because the two queries aren’t the same, but consider the visual. The data is flowing from your disk and through your execution plan before it reaches SSIS, so you could easily find that a blocking operation in your plan is just as painful as a blocking operation in your SSIS Data Flow. Luckily, T-SQL gives us a brilliant query hint to help avoid this. OPTION (FAST 10000) This hint means that it will choose a query which will optimise for the first 10,000 rows – the default SSIS buffer size. And the effect can be quite significant. First let’s consider a simple example, then we’ll look at a larger one. Consider our weights. We don’t have 10,000, so I’m going to use OPTION (FAST 1) instead. You’ll notice that the query is more expensive, using a Flow Distinct operator instead of the Distinct Sort. This operator is consuming 84% of the query, instead of the 59% we saw from the Distinct Sort. But the first row could be returned quicker – a Flow Distinct operator is non-blocking. The data here isn’t sorted, of course. It’s in the same order that it came out of the index, just with duplicates removed. As soon as a Flow Distinct sees a value that it hasn’t come across before, it pushes it out to the operator on its left. It still has to maintain the list of what it’s seen so far, but by handling it one row at a time, it can push rows through quicker. Overall, it’s a lot more work than the Distinct Sort, but if the priority is the first few rows, then perhaps that’s exactly what we want. The Query Optimizer seems to do this by optimising the query as if there were only one row coming through: This 1 row estimation is caused by the Query Optimizer imagining the SELECT operation saying “Give me one row” first, and this message being passed all the way along. The request might not make it all the way back to the source, but in my simple example, it does. I hope this simple example has helped you understand the significance of the blocking operator. Now I’m going to show you an example on a much larger data set. This data was fetching about 780,000 rows, and these are the Estimated Plans. The data needed to be Sorted, to support further SSIS operations that needed that. First, without the hint. ...and now with OPTION (FAST 10000): A very different plan, I’m sure you’ll agree. In case you’re curious, those arrows in the top one are 780,000 rows in size. In the second, they’re estimated to be 10,000, although the Actual figures end up being 780,000. The top one definitely runs faster. It finished several times faster than the second one. With the amount of data being considered, these numbers were in minutes. Look at the second one – it’s doing Nested Loops, across 780,000 rows! That’s not generally recommended at all. That’s “Go and make yourself a coffee” time. In this case, it was about six or seven minutes. The faster one finished in about a minute. But in SSIS-land, things are different. The particular data flow that was consuming this data was significant. It was being pumped into a Script Component to process each row based on previous rows, creating about a dozen different flows. The data flow would take roughly ten minutes to run – ten minutes from when the data first appeared. The query that completes faster – chosen by the Query Optimizer with no hints, based on accurate statistics (rather than pretending the numbers are smaller) – would take a minute to start getting the data into SSIS, at which point the ten-minute flow would start, taking eleven minutes to complete. The query that took longer – chosen by the Query Optimizer pretending it only wanted the first 10,000 rows – would take only ten seconds to fill the first buffer. Despite the fact that it might have taken the database another six or seven minutes to get the data out, SSIS didn’t care. Every time it wanted the next buffer of data, it was already available, and the whole process finished in about ten minutes and ten seconds. When debugging SSIS, you run the package, and sit there waiting to see the Debug information start appearing. You look for the numbers on the data flow, and seeing operators going Yellow and Green. Without the hint, I’d sit there for a minute. With the hint, just ten seconds. You can imagine which one I preferred. By adding this hint, it felt like a magic wand had been waved across the query, to make it run several times faster. It wasn’t the case at all – but it felt like it to SSIS.

Read the article

centos 6 ps aux hangs up

- by Guntis

I have problem with my server. Server is running centos 6 (CloudLinux Server release 6.2). uname -a = 2.6.32-320.4.1.lve1.1.4.el6.x86_64 That is a kvm guest. On host is debian 6. If i run command ps aux, it stuck on random process (shows some processes only), top command is working fine. htop doesn't work too (black screen). top - 12:11:51 up 34 min, 1 user, load average: 4.26, 6.71, 16.15 Tasks: 201 total, 7 running, 192 sleeping, 0 stopped, 2 zombie Cpu(s): 7.9%us, 2.8%sy, 0.0%ni, 87.5%id, 1.6%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 9862044k total, 2359484k used, 7502560k free, 171720k buffers Swap: 10485720k total, 0k used, 10485720k free, 1336872k cached server has one Intel(R) Xeon(R) CPU E5606 @ 2.13GHz, free -m total used free shared buffers cached Mem: 9630 2336 7293 0 170 1324 -/+ buffers/cache: 841 8789 Swap: 10239 0 10239 php -v PHP 5.3.19 (cli) (built: Nov 28 2012 10:03:07) Copyright (c) 1997-2012 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2012 Zend Technologies with the ionCube PHP Loader v4.2.2, Copyright (c) 2002-2012, by ionCube Ltd., and with Zend Guard Loader v3.3, Copyright (c) 1998-2010, by Zend Technologies with Suhosin v0.9.33, Copyright (c) 2007-2012, by SektionEins GmbH mysql Server version: 5.1.63-cll php -i disable_functions => apache_child_terminate, apache_setenv, define_syslog_variables, escapeshellarg, escapeshellcmd, eval, exec, fp, fput, ftp_connect, ftp_e xec, ftp_get, ftp_login, ftp_nb_fput, ftp_put, ftp_raw, ftp_rawlist, highlight_file, ini_alter, ini_get_all, ini_restore, inject_code, openlog, passthru, php _uname, phpAds_remoteInfo, phpAds_XmlRpc, phpAds_xmlrpcDecode, phpAds_xmlrpcEncode, popen, posix_getpwuid, posix_kill, posix_mkfifo, posix_setpgid, posix_set sid, posix_setuid, posix_setuid, posix_uname, proc_close, proc_get_status, proc_nice, proc_open, proc_terminate, shell_exec, syslog, system, xmlrpc_entity_de code, xmlrpc_server_create, putenv, show_source,mail => apache_child_terminate, apache_setenv, define_syslog_variables, escapeshellarg, escapeshellcmd, eval, exec, fp, fput, ftp_connect, ftp_exec, ftp_get, ftp_login, ftp_nb_fput, ftp_put, ftp_raw, ftp_rawlist, highlight_file, ini_alter, ini_get_all, ini_restore, inject_code, openlog, passthru, php_uname, phpAds_remoteInfo, phpAds_XmlRpc, phpAds_xmlrpcDecode, phpAds_xmlrpcEncode, popen, posix_getpwuid, posix_kill, pos ix_mkfifo, posix_setpgid, posix_setsid, posix_setuid, posix_setuid, posix_uname, proc_close, proc_get_status, proc_nice, proc_open, proc_terminate, shell_exe c, syslog, system, xmlrpc_entity_decode, xmlrpc_server_create, putenv, show_source,mail ... suhosin.executor.disable_eval => Off => Off suhosin.executor.eval.blacklist => include,include_once,require,require_once,curl_init,fpassthru,base64_encode,base64_decode,mail,exec,system,proc_open,leak, syslog,pfsockopen,shell_exec,ini_restore,symlink,stream_socket_server,proc_nice,popen,proc_get_status,dl, pcntl_exec, pcntl_fork, pcntl_signal,pcntl_waitpid, pcntl_wexitstatus, pcntl_wifexited, pcntl_wifsignaled,pcntl_wifstopped, pcntl_wstopsig, pcntl_wtermsig, socket_accept,socket_bind, socket_connect, socket_cr eate, socket_create_listen,socket_create_pair,link,register_shutdown_function,register_tick_function,gzinflate => include,include_once,require,require_once,c url_init,fpassthru,base64_encode,base64_decode,mail,exec,system,proc_open,leak,syslog,pfsockopen,shell_exec,ini_restore,symlink,stream_socket_server,proc_nic e,popen,proc_get_status,dl, pcntl_exec, pcntl_fork, pcntl_signal,pcntl_waitpid, pcntl_wexitstatus, pcntl_wifexited, pcntl_wifsignaled,pcntl_wifstopped, pcntl _wstopsig, pcntl_wtermsig, socket_accept,socket_bind, socket_connect, socket_create, socket_create_listen,socket_create_pair,link,register_shutdown_function, register_tick_function,gzinflate Sometimes i cannot kill httpd process. I run kill -9 PID even several times, and nothing happens. php runs via suphp. I learned somewhere that it can be trojan. I ran strace ps aux and it stops on open("/proc/PID/cmdline", O_RDONLY) If i reboot server, problem is gone but after some time it is back again .. :( Thanks.

Read the article

Is .gitignore not working or I have misunderstood it?

- by Shubham

I am very new to git. I have a .gitignore in the my working folder. *.jpg *.gif *.png system/* */Zend/* .idea/*.* Well, I did git init and then git add *. At this it worked fine and ignored the above files. But when I did some changes, ran the same command it puts the ignored files into staging area. The reason why I am using git add * is because I work on many files and adding each file would be a overkill. Update: Here are messages when I run git add * second time.. #new file: application/vendors/Zend/XmlRpc/Value/String.php #new file: application/vendors/Zend/XmlRpc/Value/Struct.php ... The list is too long.

Read the article

SQL SERVER – CXPACKET – Parallelism – Advanced Solution – Wait Type – Day 7 of 28

- by pinaldave

Earlier we discussed about the what is the common solution to solve the issue with CXPACKET wait time. Today I am going to talk about few of the other suggestions which can help to reduce the CXPACKET wait. If you are going to suggest that I should focus on MAXDOP and COST THRESHOLD – I totally agree. I have covered them in details in yesterday’s blog post. Today we are going to discuss few other way CXPACKET can be reduced. Potential Reasons: If data is heavily skewed, there are chances that query optimizer may estimate the correct amount of the data leading to assign fewer thread to query. This can easily lead to uneven workload on threads and may create CXPAKCET wait. While retrieving the data one of the thread face IO, Memory or CPU bottleneck and have to wait to get those resources to execute its tasks, may create CXPACKET wait as well. Data which is retrieved is on different speed IO Subsystem. (This is not common and hardly possible but there are chances). Higher fragmentations in some area of the table can lead less data per page. This may lead to CXPACKET wait. As I said the reasons here mentioned are not the major cause of the CXPACKET wait but any kind of scenario can create the probable wait time. Best Practices to Reduce CXPACKET wait: Refer earlier article regarding MAXDOP and Cost Threshold. De-fragmentation of Index can help as more data can be obtained per page. (Assuming close to 100 fill-factor) If data is on multiple files which are on multiple similar speed physical drive, the CXPACKET wait may reduce. Keep the statistics updated, as this will give better estimate to query optimizer when assigning threads and dividing the data among available threads. Updating statistics can significantly improve the strength of the query optimizer to render proper execution plan. This may overall affect the parallelism process in positive way. Bad Practice: In one of the recent consultancy project, when I was called in I noticed that one of the ‘experienced’ DBA noticed higher CXPACKET wait and to reduce them, he has increased the worker threads. The reality was increasing worker thread has lead to many other issues. With more number of the threads, more amount of memory was used leading memory pressure. As there were more threads CPU scheduler faced higher ‘Context Switching’ leading further degrading performance. When I explained all these to ‘experienced’ DBA he suggested that now we should reduce the number of threads. Not really! Lower number of the threads may create heavy stalling for parallel queries. I suggest NOT to touch the setting of number of the threads when dealing with CXPACKET wait. Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and I no way claim it to be accurate. I suggest reading book on-line for further clarification. All the discussion of Wait Stats over here is generic and it varies by system to system. You are recommended to test this on development server before implementing to production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: DMV, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

Read the article

Speed up SQL Server queries with PREFETCH

- by Akshay Deep Lamba

Problem The SAN data volume has a throughput capacity of 400MB/sec; however my query is still running slow and it is waiting on I/O (PAGEIOLATCH_SH). Windows Performance Monitor shows data volume speed of 4MB/sec. Where is the problem and how can I find the problem? Solution This is another summary of a great article published by R. Meyyappan at www.sqlworkshops.com. In my opinion, this is the first article that highlights and explains with working examples how PREFETCH determines the performance of a Nested Loop join. First of all, I just want to recall that Prefetch is a mechanism with which SQL Server can fire up many I/O requests in parallel for a Nested Loop join. When SQL Server executes a Nested Loop join, it may or may not enable Prefetch accordingly to the number of rows in the outer table. If the number of rows in the outer table is greater than 25 then SQL will enable and use Prefetch to speed up query performance, but it will not if it is less than 25 rows. In this section we are going to see different scenarios where prefetch is automatically enabled or disabled. These examples only use two tables RegionalOrder and Orders. If you want to create the sample tables and sample data, please visit this site www.sqlworkshops.com. The breakdown of the data in the RegionalOrders table is shown below and the Orders table contains about 6 million rows. In this first example, I am creating a stored procedure against two tables and then execute the stored procedure. Before running the stored proceudre, I am going to include the actual execution plan. --Example provided by www.sqlworkshops.com --Create procedure that pulls orders based on City --Do not forget to include the actual execution plan CREATE PROC RegionalOrdersProc @City CHAR(20) AS BEGIN DECLARE @OrderID INT, @OrderDetails CHAR(200) SELECT @OrderID = o.OrderID, @OrderDetails = o.OrderDetails FROM RegionalOrders ao INNER JOIN Orders o ON (o.OrderID = ao.OrderID) WHERE City = @City END GO SET STATISTICS time ON GO --Example provided by www.sqlworkshops.com --Execute the procedure with parameter SmallCity1 EXEC RegionalOrdersProc 'SmallCity1' GO After running the stored procedure, if we right click on the Clustered Index Scan and click Properties we can see the Estimated Numbers of Rows is 24. If we right click on Nested Loops and click Properties we do not see Prefetch, because it is disabled. This behavior was expected, because the number of rows containing the value ‘SmallCity1’ in the outer table is less than 25. Now, if I run the same procedure with parameter ‘BigCity’ will Prefetch be enabled? --Example provided by www.sqlworkshops.com --Execute the procedure with parameter BigCity --We are using cached plan EXEC RegionalOrdersProc 'BigCity' GO As we can see from the below screenshot, prefetch is not enabled and the query takes around 7 seconds to execute. This is because the query used the cached plan from ‘SmallCity1’ that had prefetch disabled. Please note that even if we have 999 rows for ‘BigCity’ the Estimated Numbers of Rows is still 24. Finally, let’s clear the procedure cache to trigger a new optimization and execute the procedure again. DBCC freeproccache GO EXEC RegionalOrdersProc 'BigCity' GO This time, our procedure runs under a second, Prefetch is enabled and the Estimated Number of Rows is 999. The RegionalOrdersProc can be optimized by using the below example where we are using an optimizer hint. I have also shown some other hints that could be used as well. --Example provided by www.sqlworkshops.com --You can fix the issue by using any of the following --hints --Create procedure that pulls orders based on City DROP PROC RegionalOrdersProc GO CREATE PROC RegionalOrdersProc @City CHAR(20) AS BEGIN DECLARE @OrderID INT, @OrderDetails CHAR(200) SELECT @OrderID = o.OrderID, @OrderDetails = o.OrderDetails FROM RegionalOrders ao INNER JOIN Orders o ON (o.OrderID = ao.OrderID) WHERE City = @City --Hinting optimizer to use SmallCity2 for estimation OPTION (optimize FOR (@City = 'SmallCity2')) --Hinting optimizer to estimate for the currnet parameters --option (recompile) --Hinting optimize not to use histogram rather --density for estimation (average of all 3 cities) --option (optimize for (@City UNKNOWN)) --option (optimize for UNKNOWN) END GO Conclusion, this tip was mainly aimed at illustrating how Prefetch can speed up query execution and how the different number of rows can trigger this.

Read the article

How do I deal with a third party application that has embedded hints that result in a sub-optimal execution plan in my environment?

- by Maria Colgan

I have gotten many variations on this question recently as folks begin to upgrade to Oracle Database 11g and there have been several posts on this blog and on others describing how to use SQL Plan Management (SPM) so that a non-hinted SQL statement can use a plan generated with hints. But what if the hint is supplied in the third party application and is causing performance regressions on your system? You can actually use a very similar technique to the ones shown before but this time capture the un-hinted plan and have the hinted SQL statement use that plan instead. Below is an example that demonstrates the necessary steps. 1. We will begin by running the hinted statement 2. After examining the execution plan we can see it is suboptimal because of a bad join order. 3. In order to use SPM to correct the problem we must create a SQL plan baseline for the statement. In order to create a baseline we will need the SQL_ID for the hinted statement. Easy place to get it is in V$SQL. 4. A SQL plan baseline can be created using a SQL_ID and DBMS_SPM.LOAD_PLANS_FROM_CURSOR_CACHE. This will capture the existing plan for this SQL_ID from the shared pool and store in the SQL plan baseline. 5. We can check the SQL plan baseline got created successfully by querying DBA_SQL_PLAN_BASELINES. 6. When you manually create a SQL plan baseline the first plan added is automatically accepted and enabled. We know that the hinted plan is poorly performing plan so we will disable it using DBMS_SPM.ALTER_SQL_PLAN_BASELINE. Disabling the plan tells the optimizer that this plan not a good plan, however since there is no alternative plan at this point the optimizer will still continue to use this plan until we provide a better one. 7. Now let's run the statement without the hint. 8. Looking at the execution plan we can see that the join order is different. The plan without the hint also has a lower cost (3X lower), which indicates it should perform better. 9. In order to map the un-hinted plan to the hinted SQL statement we need to add the plan to the SQL plan baseline for the hinted statement. We can do this using DBMS_SPM.LOAD_PLANS_FROM_CURSOR_CACHE but we will need the SQL_ID and PLAN_HASH_VALUE for the non-hinted statement, which we can find in V$SQL. 10. Now we can add the non-hinted plan to the SQL plan baseline of the hinted SQL statement using DBMS_SPM.LOAD_PLANS_FROM_CURSOR_CACHE. This time we need to pass a few more arguments. We will use the SQL_ID and PLAN_HASH_VALUE of the non-hinted statement but the SQL_HANDLE of the hinted statement. 11. The SQL plan baseline for our statement now has two plans. But only the newly added plan (SQL_PLAN_gbpcg3f67pc788a6d8911) is enabled and accepted. This tells the Optimizer that this is the plan it should use for this statement. We can confirm that the correct plan (non-hinted) will be selected for the statement from now on by re-executing the hinted statement and checking its execution plan.

Read the article

SQL Constraints – CHECK and NOCHECK

- by David Turner

One performance issue i faced at a recent project was with the way that our constraints were being managed, we were using Subsonic as our ORM, and it has a useful tool for generating your ORM code called SubStage – once configured, you can regenerate your DAL code easily based on your database schema, and it can even be integrated into your build as a pre-build event if you want to do this. SubStage also offers the useful feature of being able to generate DDL scripts for your entire database, and can script your data for you too. The problem came when we decided to use the generate scripts feature to migrate the database onto a test database instance – it turns out that the DDL scripts that it generates include the WITH NOCHECK option, so when we executed them on the test instance, and performed some testing, we found that performance wasn’t as expected. A constraint can be disabled, enabled but not trusted, or enabled and trusted. When it is disabled, data can be inserted that violates the constraint because it is not being enforced, this is useful for bulk load scenarios where performance is important. So what does it mean to say that a constraint is trusted or not trusted? Well this refers to the SQL Server Query Optimizer, and whether it trusts that the constraint is valid. If it trusts the constraint then it doesn’t check it is valid when executing a query, so the query can be executed much faster. Here is an example base in this article on TechNet, here we create two tables with a Foreign Key constraint between them, and add a single row to each. We then query the tables: 1 DROP TABLE t2 2 DROP TABLE t1 3 GO 4 5 CREATE TABLE t1(col1 int NOT NULL PRIMARY KEY) 6 CREATE TABLE t2(col1 int NOT NULL) 7 8 ALTER TABLE t2 WITH CHECK ADD CONSTRAINT fk_t2_t1 FOREIGN KEY(col1) 9 REFERENCES t1(col1) 10 11 INSERT INTO t1 VALUES(1) 12 INSERT INTO t2 VALUES(1) 13 GO14 15 SELECT COUNT(*) FROM t2 16 WHERE EXISTS17 (SELECT *18 FROM t1 19 WHERE t1.col1 = t2.col1) This all works fine, and in this scenario the constraint is enabled and trusted. We can verify this by executing the following SQL to query the ‘is_disabled’ and ‘is_not_trusted’ properties: 1 select name, is_disabled, is_not_trusted from sys.foreign_keys This gives the following result: We can disable the constraint using this SQL: 1 alter table t2 NOCHECK CONSTRAINT fk_t2_t1 And when we query the constraints again, we see that the constraint is disabled and not trusted: So the constraint won’t be enforced and we can insert data into the table t2 that doesn’t match the data in t1, but we don’t want to do this, so we can enable the constraint again using this SQL: 1 alter table t2 CHECK CONSTRAINT fk_t2_t1 But when we query the constraints again, we see that the constraint is enabled, but it is still not trusted: This means that the optimizer will check the constraint each time a query is executed over it, which will impact the performance of the query, and this is definitely not what we want, so we need to make the constraint trusted by the optimizer again. First we should check that our constraints haven’t been violated, which we can do by running DBCC: 1 DBCC CHECKCONSTRAINTS (t2) Hopefully you see the following message indicating that DBCC completed without finding any violations of your constraint: Having verified that the constraint was not violated while it was disabled, we can simply execute the following SQL: 1 alter table t2 WITH CHECK CHECK CONSTRAINT fk_t2_t1 At first glance this looks like it must be a typo to have the keyword CHECK repeated twice in succession, but it is the correct syntax and when we query the constraints properties, we find that it is now trusted again: To fix our specific problem, we created a script that checked all constraints on our tables, using the following syntax: 1 ALTER TABLE t2 WITH CHECK CHECK CONSTRAINT ALL

Read the article

Non use of persisted data

- by Dave Ballantyne

Working at a client site, that in itself is good to say, I ran into a set of circumstances that made me ponder, and appreciate, the optimizer engine a bit more. Working on optimizing a stored procedure, I found a piece of code similar to : select BillToAddressID, Rowguid, dbo.udfCleanGuid(rowguid) from sales.salesorderheaderwhere BillToAddressID = 985 A lovely scalar UDF was being used, in actuality it was used as part of the WHERE clause but simplified here. Normally I would use an inline table valued function here, but in this case it wasn't a good option. So this seemed like a pretty good case to use a persisted column to improve performance. The supporting index was already defined as create index idxBill on sales.salesorderheader(BillToAddressID) include (rowguid) and the function code is Create Function udfCleanGuid(@GUID uniqueidentifier)returns varchar(255)with schemabindingasbegin Declare @RetStr varchar(255) Select @RetStr=CAST(@Guid as varchar(255)) Select @RetStr=REPLACE(@Retstr,'-','') return @RetStrend Executing the Select statement produced a plan of : Nothing surprising, a seek to find the data and compute scalar to execute the UDF. Lets get optimizing and remove the UDF with a persisted column Alter table sales.salesorderheaderadd CleanedGuid as dbo.udfCleanGuid(rowguid)PERSISTED A subtle change to the SELECT statement… select BillToAddressID,CleanedGuid from sales.salesorderheaderwhere BillToAddressID = 985 and our new optimized plan looks like… Not a lot different from before! We are using persisted data on our table, where is the lookup to fetch it ? It didnt happen, it was recalculated. Looking at the properties of the relevant Compute Scalar would confirm this , but a more graphic example would be shown in the profiler SP:StatementCompleted event. Why did the lookup happen ? Remember the index definition, it has included the original guid to avoid the lookup. The optimizer knows this column will be passed into the UDF, run through its logic and decided that to recalculate is cheaper than the lookup. That may or may not be the case in actuality, the optimizer has no idea of the real cost of a scalar udf. IMO the default cost of a scalar UDF should be seen as a lot higher than it is, since they are invariably higher. Knowing this, how do we avoid the function call? Dropping the guid from the index is not an option, there may be other code reliant on it. We are left with only one real option, add the persisted column into the index. drop index Sales.SalesOrderHeader.idxBillgocreate index idxBill on sales.salesorderheader(BillToAddressID) include (rowguid,cleanedguid) Now if we repeat the statement select BillToAddressID,CleanedGuid from sales.salesorderheaderwhere BillToAddressID = 985 We still have a compute scalar operator, but this time it wasnt used to recalculate the persisted data. This can be confirmed with profiler again. The takeaway here is, just because you have persisted data dont automatically assumed that it is being used.

Read the article

?12c database ????Adaptive Execution Plans ????????

- by Liu Maclean(???)

12c R1 ????SQL??????- Adaptive Execution Plans ????????,???????optimizer ??????(runtime)???????????????, ????????????????????? SQL???????? ????????????, ?????????????????????????????????????????????????????????????adaptive plan ????????????????????????????????????,?????subplan???????????????????? ??????, ???????? ???????????????,?????????, ?????? ???????????????”???”????, ???????????????????buffer ??????? ????????????,?????,??????????????????? ???optimizer ?????????????????????????,?????????????????????????????????????????plan???? ??12C?????????????, ???????????????????,?????? ???????????? ????????????2???: Dynamic Plans????: ???????????????????????;??????,???optimizer??????????subplans??????????????, ???????????????????,?????????????? Reoptimization????: ?Dynamic Plans????,Reoptimization??????????????????????Reoptimization??,?????????????????????????,??reoptimization????? OPTIMIZER_ADAPTIVE_REPORTING_ONLY ???? report-only????????????????TRUE,?????????report-only????,???????????????,??????????????? Dynamic Plans ??????????????,????????????????????????, ?????????????,???????????,????????????????????????????????????????? ?????????????final plan??????????????default plan, ??final plan?default plan???????,????????????? subplan ???????????????,???????????????????????? ??????,???????statistics collector ?buffer???????????statistics collector?????????????????,???????????????????????????? ?????????????????????????????????????????,??????????,?????????????? ???????????,???????buffer???? ???????????????,?????????????????????????????,??????buffer,??????final plan? ????????,???????????????????????,????????????????? ?V$SQL??????IS_RESOLVED_DYNAMIC_PLAN??????????final plan???default plan? ??????dynamic plan ???????SQL PLAN directives?????? declare cursor PLAN_DIRECTIVE_IDS is select directive_id from DBA_SQL_PLAN_DIRECTIVES; begin for z in PLAN_DIRECTIVE_IDS loop DBMS_SPD.DROP_SQL_PLAN_DIRECTIVE(z.directive_id); end loop; end; / explain plan for select /*MALCEAN*/ product_name from oe.order_items o, oe.product_information p where o.unit_price=15 and quantity>1 and p.product_id=o.product_id; select * from table(dbms_xplan.display()); Plan hash value: 1255158658 www.askmaclean.com ------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | ------------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 4 | 128 | 7 (0)| 00:00:01 | | 1 | NESTED LOOPS | | | | | | | 2 | NESTED LOOPS | | 4 | 128 | 7 (0)| 00:00:01 | |* 3 | TABLE ACCESS FULL | ORDER_ITEMS | 4 | 48 | 3 (0)| 00:00:01 | |* 4 | INDEX UNIQUE SCAN | PRODUCT_INFORMATION_PK | 1 | | 0 (0)| 00:00:01 | | 5 | TABLE ACCESS BY INDEX ROWID| PRODUCT_INFORMATION | 1 | 20 | 1 (0)| 00:00:01 | ------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 3 - filter("O"."UNIT_PRICE"=15 AND "QUANTITY">1) 4 - access("P"."PRODUCT_ID"="O"."PRODUCT_ID") alter session set events '10053 trace name context forever,level 1'; OR alter session set events 'trace[SQL_Plan_Directive] disk highest'; select /*MALCEAN*/ product_name from oe.order_items o, oe.product_information p where o.unit_price=15 and quantity>1 and p.product_id=o.product_id; ---------------------------------------------------------------+-----------------------------------+ | Id | Operation | Name | Rows | Bytes | Cost | Time | ---------------------------------------------------------------+-----------------------------------+ | 0 | SELECT STATEMENT | | | | 7 | | | 1 | HASH JOIN | | 4 | 128 | 7 | 00:00:01 | | 2 | NESTED LOOPS | | | | | | | 3 | NESTED LOOPS | | 4 | 128 | 7 | 00:00:01 | | 4 | STATISTICS COLLECTOR | | | | | | | 5 | TABLE ACCESS FULL | ORDER_ITEMS | 4 | 48 | 3 | 00:00:01 | | 6 | INDEX UNIQUE SCAN | PRODUCT_INFORMATION_PK| 1 | | 0 | | | 7 | TABLE ACCESS BY INDEX ROWID | PRODUCT_INFORMATION | 1 | 20 | 1 | 00:00:01 | | 8 | TABLE ACCESS FULL | PRODUCT_INFORMATION | 1 | 20 | 1 | 00:00:01 | ---------------------------------------------------------------+-----------------------------------+ Predicate Information: ---------------------- 1 - access("P"."PRODUCT_ID"="O"."PRODUCT_ID") 5 - filter(("O"."UNIT_PRICE"=15 AND "QUANTITY">1)) 6 - access("P"."PRODUCT_ID"="O"."PRODUCT_ID") ===================================== SPD: BEGIN context at statement level ===================================== Stmt: ******* UNPARSED QUERY IS ******* SELECT /*+ OPT_ESTIMATE (@"SEL$1" JOIN ("P"@"SEL$1" "O"@"SEL$1") ROWS=13.000000 ) OPT_ESTIMATE (@"SEL$1" TABLE "O"@"SEL$1" ROWS=13.000000 ) */ "P"."PRODUCT_NAME" "PRODUCT_NAME" FROM "OE"."ORDER_ITEMS" "O","OE"."PRODUCT_INFORMATION" "P" WHERE "O"."UNIT_PRICE"=15 AND "O"."QUANTITY">1 AND "P"."PRODUCT_ID"="O"."PRODUCT_ID" Objects referenced in the statement PRODUCT_INFORMATION[P] 92194, type = 1 ORDER_ITEMS[O] 92197, type = 1 Objects in the hash table Hash table Object 92197, type = 1, ownerid = 6573730143572393221: No Dynamic Sampling Directives for the object Hash table Object 92194, type = 1, ownerid = 17822962561575639002: No Dynamic Sampling Directives for the object Return code in qosdInitDirCtx: ENBLD =================================== SPD: END context at statement level =================================== ======================================= SPD: BEGIN context at query block level ======================================= Query Block SEL$1 (#0) Return code in qosdSetupDirCtx4QB: NOCTX ===================================== SPD: END context at query block level ===================================== SPD: Return code in qosdDSDirSetup: NOCTX, estType = TABLE SPD: Generating finding id: type = 1, reason = 1, objcnt = 1, obItr = 0, objid = 92197, objtyp = 1, vecsize = 6, colvec = [4, 5, ], fid = 2896834833840853267 SPD: Inserted felem, fid=2896834833840853267, ftype = 1, freason = 1, dtype = 0, dstate = 0, dflag = 0, ver = YES, keep = YES SPD: qosdCreateFindingSingTab retCode = CREATED, fid = 2896834833840853267 SPD: qosdCreateDirCmp retCode = CREATED, fid = 2896834833840853267 SPD: Return code in qosdDSDirSetup: NOCTX, estType = TABLE SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = JOIN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SKIP_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = JOIN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Generating finding id: type = 1, reason = 1, objcnt = 1, obItr = 0, objid = 92197, objtyp = 1, vecsize = 6, colvec = [4, 5, ], fid = 2896834833840853267 SPD: Modified felem, fid=2896834833840853267, ftype = 1, freason = 1, dtype = 0, dstate = 0, dflag = 0, ver = YES, keep = YES SPD: Generating finding id: type = 1, reason = 1, objcnt = 1, obItr = 0, objid = 92194, objtyp = 1, vecsize = 2, colvec = [1, ], fid = 5618517328604016300 SPD: Modified felem, fid=5618517328604016300, ftype = 1, freason = 1, dtype = 0, dstate = 0, dflag = 0, ver = NO, keep = NO SPD: Generating finding id: type = 1, reason = 1, objcnt = 1, obItr = 0, objid = 92194, objtyp = 1, vecsize = 2, colvec = [1, ], fid = 1142802697078608149 SPD: Modified felem, fid=1142802697078608149, ftype = 1, freason = 1, dtype = 0, dstate = 0, dflag = 0, ver = NO, keep = NO SPD: Generating finding id: type = 1, reason = 2, objcnt = 2, obItr = 0, objid = 92194, objtyp = 1, vecsize = 0, obItr = 1, objid = 92197, objtyp = 1, vecsize = 0, fid = 1437680122701058051 SPD: Modified felem, fid=1437680122701058051, ftype = 1, freason = 2, dtype = 0, dstate = 0, dflag = 0, ver = NO, keep = NO select * from table(dbms_xplan.display_cursor(format=>'report')) ; ????report????adaptive plan Adaptive plan: ------------- This cursor has an adaptive plan, but adaptive plans are enabled for reporting mode only. The plan that would be executed if adaptive plans were enabled is displayed below. ------------------------------------------------------------------------------------------ | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | ------------------------------------------------------------------------------------------ | 0 | SELECT STATEMENT | | | | 7 (100)| | |* 1 | HASH JOIN | | 4 | 128 | 7 (0)| 00:00:01 | |* 2 | TABLE ACCESS FULL| ORDER_ITEMS | 4 | 48 | 3 (0)| 00:00:01 | | 3 | TABLE ACCESS FULL| PRODUCT_INFORMATION | 1 | 20 | 1 (0)| 00:00:01 | ------------------------------------------------------------------------------------------ SQL> select SQL_ID,IS_RESOLVED_DYNAMIC_PLAN,sql_text from v$SQL WHERE SQL_TEXT like '%MALCEAN%' and sql_text not like '%like%'; SQL_ID IS -------------------------- -- SQL_TEXT -------------------------------------------------------------------------------- 6ydj1bn1bng17 Y select /*MALCEAN*/ product_name from oe.order_items o, oe.product_information p where o.unit_price=15 and quantity>1 and p.product_id=o.product_id ???? explain plan for ????default plan, ??????optimizer???final plan,??V$SQL.IS_RESOLVED_DYNAMIC_PLAN???Y,????????????? DBA_SQL_PLAN_DIRECTIVES?????????????SQL PLAN DIRECTIVES, ???12c? ???MMON?????DML ???column usage??????????,????SMON??? MMON????SGA??PLAN DIRECTIVES??? ?????DBMS_SPD.flush_sql_plan_directive???? select directive_id,type,reason from DBA_SQL_PLAN_DIRECTIVES / DIRECTIVE_ID TYPE REASON ----------------------------------- -------------------------------- ----------------------------- 10321283028317893030 DYNAMIC_SAMPLING JOIN CARDINALITY MISESTIMATE 4757086536465754886 DYNAMIC_SAMPLING JOIN CARDINALITY MISESTIMATE 16085268038103121260 DYNAMIC_SAMPLING JOIN CARDINALITY MISESTIMATE SQL> set pages 9999 SQL> set lines 300 SQL> col state format a5 SQL> col subobject_name format a11 SQL> col col_name format a11 SQL> col object_name format a13 SQL> select d.directive_id, o.object_type, o.object_name, o.subobject_name col_name, d.type, d.state, d.reason 2 from dba_sql_plan_directives d, dba_sql_plan_dir_objects o 3 where d.DIRECTIVE_ID=o.DIRECTIVE_ID 4 and o.object_name in ('ORDER_ITEMS') 5 order by d.directive_id; DIRECTIVE_ID OBJECT_TYPE OBJECT_NAME COL_NAME TYPE STATE REASON ------------ ------------ ------------- ----------- -------------------------------- ----- ------------------------------------- --- 1.8156E+19 COLUMN ORDER_ITEMS UNIT_PRICE DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE 1.8156E+19 TABLE ORDER_ITEMS DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE 1.8156E+19 COLUMN ORDER_ITEMS QUANTITY DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE DBA_SQL_PLAN_DIRECTIVES????? _BASE_OPT_DIRECTIVE ? _BASE_OPT_FINDING SELECT d.dir_own#, d.dir_id, d.f_id, decode(type, 1, 'DYNAMIC_SAMPLING', 'UNKNOWN'), decode(state, 1, 'NEW', 2, 'MISSING_STATS', 3, 'HAS_STATS', 4, 'CANDIDATE', 5, 'PERMANENT', 6, 'DISABLED', 'UNKNOWN'), decode(bitand(flags, 1), 1, 'YES', 'NO'), cast(d.created as timestamp), cast(d.last_modified as timestamp), -- Please see QOSD_DAYS_TO_UPDATE and QOSD_PLUS_SECONDS for more details -- about 6.5 cast(d.last_used as timestamp) - NUMTODSINTERVAL(6.5, 'day') FROM sys.opt_directive$ d ??dbms_spd??? SQL PLAN DIRECTIVES, SQL PLAN DIRECTIVES???retention ???53?: Package: DBMS_SPD This package provides subprograms for managing Sql Plan Directives(SPD). SPD are objects generated automatically by Oracle server. For example, if server detects that the single table cardinality estimated by optimizer is off from the actual number of rows returned when accessing the table, it will automatically create a directive to do dynamic sampling for the table. When any Sql statement referencing the table is compiled, optimizer will perform dynamic sampling for the table to get more accurate estimate. Notes: DBMSL_SPD is a invoker-rights package. The invoker requires ADMINISTER SQL MANAGEMENT OBJECT privilege for executing most of the subprograms of this package. Also the subprograms commit the current transaction (if any), perform the operation and commit it again. DBA view dba_sql_plan_directives shows all the directives created in the system and the view dba_sql_plan_dir_objects displays the objects that are included in the directives. -- Default value for SPD_RETENTION_WEEKS SPD_RETENTION_WEEKS_DEFAULT CONSTANT varchar2(4) := '53'; | STATE : NEW : Newly created directive. | : MISSING_STATS : The directive objects do not | have relevant stats. | : HAS_STATS : The objects have stats. | : PERMANENT : A permanent directive. Server | evaluated effectiveness and these | directives are useful. | | AUTO_DROP : YES : Directive will be dropped | automatically if not | used for SPD_RETENTION_WEEKS. | This is the default behavior. | NO : Directive will not be dropped | automatically. Procedure: flush_sql_plan_directive This procedure allows manually flushing the Sql Plan directives that are automatically recorded in SGA memory while executing sql statements. The information recorded in SGA are periodically flushed by oracle background processes. This procedure just provides a way to flush the information manually. ????”_optimizer_dynamic_plans”(enable dynamic plans)????????,???TRUE??DYNAMIC PLAN? ???FALSE???????????? ????,Dynamic Plan????????????Nested Loop?Hash Join???case ,????????Nested loop???????????HASH JOIN,?HASH JOIN????????????????? ????????subplan?????,???? pass?? ?join method???,?????STATISTICS COLLECTOR???cardinality?,???????HASH JOIN?????Nested Loop,????????????subplan?????access path; ???????Sales??????????????????,????HASH JOIN,??SUBPLAN??customers?????????;?????Nested Loop,???????cust_id?????Range Scan+Access by Rowid? Cardinality feedback Cardinality feedback????????11.2????,????????re-optimization???; ???????????,Cardinality feedback?????????????????????????? ???????????????????,?????????????????,??????????Cardinality feedback????????????? ????????????????????????? ??????????????Cardinality feedback ??: ????????,???????????,??????????,????????????????selectivity ??? ????????????: ??????,?????????????????????????????????,??????????????????? ????????????????????????????????????????,?????????????????????????? ?????????,???????????????,?????????? ??????????Cardinality ????,??????join Cardinality ????????? Cardinality feedback???????cursor?,?Cursor???aged out????? SELECT /*+ gather_plan_statistics */ product_name FROM order_items o, product_information p WHERE o.unit_price = 15 AND quantity > 1 AND p.product_id = o.product_id Plan hash value: 1553478007 ---------------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads | OMem | 1Mem | Used-Mem | ---------------------------------------------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 13 |00:00:00.01 | 24 | 20 | | | | |* 1 | HASH JOIN | | 1 | 4 | 13 |00:00:00.01 | 24 | 20 | 2061K| 2061K| 429K (0)| |* 2 | TABLE ACCESS FULL| ORDER_ITEMS | 1 | 4 | 13 |00:00:00.01 | 7 | 6 | | | | | 3 | TABLE ACCESS FULL| PRODUCT_INFORMATION | 1 | 1 | 288 |00:00:00.01 | 17 | 14 | | | | ---------------------------------------------------------------------------------------------------------------------------------------- SELECT /*+ gather_plan_statistics */ product_name FROM order_items o, product_information p WHERE o.unit_price = 15 AND quantity > 1 AND p.product_id = o.product_id Plan hash value: 1553478007 ------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | OMem | 1Mem | Used-Mem | ------------------------------------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 13 |00:00:00.01 | 24 | | | | |* 1 | HASH JOIN | | 1 | 13 | 13 |00:00:00.01 | 24 | 2061K| 2061K| 413K (0)| |* 2 | TABLE ACCESS FULL| ORDER_ITEMS | 1 | 13 | 13 |00:00:00.01 | 7 | | | | | 3 | TABLE ACCESS FULL| PRODUCT_INFORMATION | 1 | 288 | 288 |00:00:00.01 | 17 | | | | ------------------------------------------------------------------------------------------------------------------------------- Note ----- - statistics feedback used for this statement SQL> select count(*) from v$SQL where SQL_ID='cz0hg2zkvd10y'; COUNT(*) ---------- 2 SQL>select sql_ID,USE_FEEDBACK_STATS FROM V$SQL_SHARED_CURSOR where USE_FEEDBACK_STATS ='Y'; SQL_ID U ------------- - cz0hg2zkvd10y Y ????????Cardinality feedback????,???????????????????????????,????????????order_items???????? ????2??????plan hash value??(??????????),?????2????child cursor??????gather_plan_statistics???actual : A-ROWS estimate :E-ROWS????????? Automatic Re-optimization ???dynamic plan, Re-optimization??????????????? ? ??????????????? ???????????????????????????????? ???????????,??????????????, ???????????????????? ??????????? Re-optimization??, ????????????????????? Re-optimization????dynamic plan?????????? dynamic plan????????????????????, ???????????????????? ????,??????????join order ??????????????,?????????????join order????? ??????,????????Re-optimization, ??Re-optimization ??????????????????? ?Oracle database 12c?,join statistics?????????????????????,??????????????????????Re-optimization???????????adaptive cursor sharing????? ????????????????,???????????? ????? ???????statistics collectors ????????????????????Re-optimization??????2?????????????,???????????????? ??????????????Re-optimization?????,?????????????????????? ???v$SQL??????IS_REOPTIMIZABLE?????????????????????Re-optimization,??????????Re-optimization???,?????Re-optimization ,???????reporting????? IS_REOPTIMIZABLE VARCHAR2(1) This columns shows whether the next execution matching this child cursor will trigger a reoptimization. The values are: Y: If the next execution will trigger a reoptimization R: If the child cursor contains reoptimization information, but will not trigger reoptimization because the cursor was compiled in reporting mode N: If the child cursor has no reoptimization information ??1: select plan_table_output from table (dbms_xplan.display_cursor('gwf99gfnm0t7g',NULL,'ALLSTATS LAST')); SQL_ID gwf99gfnm0t7g, child number 0 ------------------------------------- SELECT /*+ SFTEST gather_plan_statistics */ o.order_id, v.product_name FROM orders o, ( SELECT order_id, product_name FROM order_items o, product_information p WHERE p.product_id = o.product_id AND list_price < 50 AND min_price < 40 ) v WHERE o.order_id = v.order_id Plan hash value: 1906736282 ------------------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads | OMem | 1Mem | Used-Mem | ------------------------------------------------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 269 |00:00:00.02 | 1336 | 18 | | | | | 1 | NESTED LOOPS | | 1 | 1 | 269 |00:00:00.02 | 1336 | 18 | | | | | 2 | MERGE JOIN CARTESIAN| | 1 | 4 | 9135 |00:00:00.02 | 34 | 15 | | | | |* 3 | TABLE ACCESS FULL | PRODUCT_INFORMATION | 1 | 1 | 87 |00:00:00.01 | 33 | 14 | | | | | 4 | BUFFER SORT | | 87 | 105 | 9135 |00:00:00.01 | 1 | 1 | 4096 | 4096 | 4096 (0)| | 5 | INDEX FULL SCAN | ORDER_PK | 1 | 105 | 105 |00:00:00.01 | 1 | 1 | | | | |* 6 | INDEX UNIQUE SCAN | ORDER_ITEMS_UK | 9135 | 1 | 269 |00:00:00.01 | 1302 | 3 | | | | ------------------------------------------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 3 - filter(("MIN_PRICE"<40 AND "LIST_PRICE"<50)) 6 - access("O"."ORDER_ID"="ORDER_ID" AND "P"."PRODUCT_ID"="O"."PRODUCT_ID") SQL_ID gwf99gfnm0t7g, child number 1 ------------------------------------- SELECT /*+ SFTEST gather_plan_statistics */ o.order_id, v.product_name FROM orders o, ( SELECT order_id, product_name FROM order_items o, product_information p WHERE p.product_id = o.product_id AND list_price < 50 AND min_price < 40 ) v WHERE o.order_id = v.order_id Plan hash value: 35479787 -------------------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads | OMem | 1Mem | Used-Mem | -------------------------------------------------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 269 |00:00:00.01 | 63 | 3 | | | | | 1 | NESTED LOOPS | | 1 | 269 | 269 |00:00:00.01 | 63 | 3 | | | | |* 2 | HASH JOIN | | 1 | 313 | 269 |00:00:00.01 | 42 | 3 | 1321K| 1321K| 1234K (0)| |* 3 | TABLE ACCESS FULL | PRODUCT_INFORMATION | 1 | 87 | 87 |00:00:00.01 | 16 | 0 | | | | | 4 | INDEX FAST FULL SCAN| ORDER_ITEMS_UK | 1 | 665 | 665 |00:00:00.01 | 26 | 3 | | | | |* 5 | INDEX UNIQUE SCAN | ORDER_PK | 269 | 1 | 269 |00:00:00.01 | 21 | 0 | | | | -------------------------------------------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 2 - access("P"."PRODUCT_ID"="O"."PRODUCT_ID") 3 - filter(("MIN_PRICE"<40 AND "LIST_PRICE"<50)) 5 - access("O"."ORDER_ID"="ORDER_ID") Note ----- - statistics feedback used for this statement SQL> select IS_REOPTIMIZABLE,child_number FROM V$SQL A where A.SQL_ID='gwf99gfnm0t7g'; IS CHILD_NUMBER -- ------------ Y 0 N 1 1* select child_number,other_xml From v$SQL_PLAN where SQL_ID='gwf99gfnm0t7g' and other_xml is not nul SQL> / CHILD_NUMBER OTHER_XML ------------ -------------------------------------------------------------------------------- 1 <other_xml><info type="cardinality_feedback">yes</info><info type="db_version">1 2.1.0.1</info><info type="parse_schema"><![CDATA["OE"]]></info><info type="plan_ hash">35479787</info><info type="plan_hash_2">3382491761</info><outline_data><hi nt><![CDATA[IGNORE_OPTIM_EMBEDDED_HINTS]]></hint><hint><![CDATA[OPTIMIZER_FEATUR ES_ENABLE('12.1.0.1')]]></hint><hint><![CDATA[DB_VERSION('12.1.0.1')]]></hint><h int><![CDATA[ALL_ROWS]]></hint><hint><![CDATA[OUTLINE_LEAF(@"SEL$F5BB74E1")]]></ hint><hint><![CDATA[MERGE(@"SEL$2")]]></hint><hint><![CDATA[OUTLINE(@"SEL$1")]]> </hint><hint><![CDATA[OUTLINE(@"SEL$2")]]></hint><hint><![CDATA[FULL(@"SEL$F5BB7 4E1" "P"@"SEL$2")]]></hint><hint><![CDATA[INDEX_FFS(@"SEL$F5BB74E1" "O"@"SEL$2" ("ORDER_ITEMS"."ORDER_ID" "ORDER_ITEMS"."PRODUCT_ID"))]]></hint><hint><![CDATA[I NDEX(@"SEL$F5BB74E1" "O"@"SEL$1" ("ORDERS"."ORDER_ID"))]]></hint><hint><![CDATA[ LEADING(@"SEL$F5BB74E1" "P"@"SEL$2" "O"@"SEL$2" "O"@"SEL$1")]]></hint><hint><![C DATA[USE_HASH(@"SEL$F5BB74E1" "O"@"SEL$2")]]></hint><hint><![CDATA[USE_NL(@"SEL$ F5BB74E1" "O"@"SEL$1")]]></hint></outline_data></other_xml> 0 <other_xml><info type="db_version">12.1.0.1</info><info type="parse_schema"><![C DATA["OE"]]></info><info type="plan_hash">1906736282</info><info type="plan_hash _2">2579473118</info><outline_data><hint><![CDATA[IGNORE_OPTIM_EMBEDDED_HINTS]]> </hint><hint><![CDATA[OPTIMIZER_FEATURES_ENABLE('12.1.0.1')]]></hint><hint><![CD ATA[DB_VERSION('12.1.0.1')]]></hint><hint><![CDATA[ALL_ROWS]]></hint><hint><![CD ATA[OUTLINE_LEAF(@"SEL$F5BB74E1")]]></hint><hint><![CDATA[MERGE(@"SEL$2")]]></hi nt><hint><![CDATA[OUTLINE(@"SEL$1")]]></hint><hint><![CDATA[OUTLINE(@"SEL$2")]]> </hint><hint><![CDATA[FULL(@"SEL$F5BB74E1" "P"@"SEL$2")]]></hint><hint><![CDATA[ INDEX(@"SEL$F5BB74E1" "O"@"SEL$1" ("ORDERS"."ORDER_ID"))]]></hint><hint><![CDATA [INDEX(@"SEL$F5BB74E1" "O"@"SEL$2" ("ORDER_ITEMS"."ORDER_ID" "ORDER_ITEMS"."PROD UCT_ID"))]]></hint><hint><![CDATA[LEADING(@"SEL$F5BB74E1" "P"@"SEL$2" "O"@"SEL$1 " "O"@"SEL$2")]]></hint><hint><![CDATA[USE_MERGE_CARTESIAN(@"SEL$F5BB74E1" "O"@" SEL$1")]]></hint><hint><![CDATA[USE_NL(@"SEL$F5BB74E1" "O"@"SEL$2")]]></hint></o utline_data></other_xml> ??2: SELECT /*+gather_plan_statistics*/ * FROM customers WHERE cust_state_province='CA' AND country_id='US'; SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(FORMAT=>'ALLSTATS LAST')); PLAN_TABLE_OUTPUT ------------------------------------- SQL_ID b74nw722wjvy3, child number 0 ------------------------------------- select /*+gather_plan_statistics*/ * from customers where CUST_STATE_PROVINCE='CA' and country_id='US' Plan hash value: 1683234692 -------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads | -------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 29 |00:00:00.01 | 17 | 14 | |* 1 | TABLE ACCESS FULL| CUSTOMERS | 1 | 8 | 29 |00:00:00.01 | 17 | 14 | -------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter(("CUST_STATE_PROVINCE"='CA' AND "COUNTRY_ID"='US')) SELECT SQL_ID, CHILD_NUMBER, SQL_TEXT, IS_REOPTIMIZABLE FROM V$SQL WHERE SQL_TEXT LIKE 'SELECT /*+gather_plan_statistics*/%'; SQL_ID CHILD_NUMBER SQL_TEXT I ------------- ------------ ----------- - b74nw722wjvy3 0 select /*+g Y ather_plan_ statistics* / * from cu stomers whe re CUST_STA TE_PROVINCE ='CA' and c ountry_id=' US' EXEC DBMS_SPD.FLUSH_SQL_PLAN_DIRECTIVE; SELECT TO_CHAR(d.DIRECTIVE_ID) dir_id, o.OWNER, o.OBJECT_NAME, o.SUBOBJECT_NAME col_name, o.OBJECT_TYPE, d.TYPE, d.STATE, d.REASON FROM DBA_SQL_PLAN_DIRECTIVES d, DBA_SQL_PLAN_DIR_OBJECTS o WHERE d.DIRECTIVE_ID=o.DIRECTIVE_ID AND o.OWNER IN ('SH') ORDER BY 1,2,3,4,5; DIR_ID OWNER OBJECT_NAME COL_NAME OBJECT TYPE STATE REASON ----------------------- ----- ------------- ----------- ------ ---------------- ----- ------------------------ 1484026771529551585 SH CUSTOMERS COUNTRY_ID COLUMN DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE 1484026771529551585 SH CUSTOMERS CUST_STATE_ COLUMN DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY PROVINCE MISESTIMATE 1484026771529551585 SH CUSTOMERS TABLE DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE SELECT /*+gather_plan_statistics*/ * FROM customers WHERE cust_state_province='CA' AND country_id='US'; ELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(FORMAT=>'ALLSTATS LAST')); PLAN_TABLE_OUTPUT ------------------------------------- SQL_ID b74nw722wjvy3, child number 1 ------------------------------------- select /*+gather_plan_statistics*/ * from customers where CUST_STATE_PROVINCE='CA' and country_id='US' Plan hash value: 1683234692 ----------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | ----------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 29 |00:00:00.01 | 17 | |* 1 | TABLE ACCESS FULL| CUSTOMERS | 1 | 29 | 29 |00:00:00.01 | 17 | ----------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter(("CUST_STATE_PROVINCE"='CA' AND "COUNTRY_ID"='US')) Note ----- - cardinality feedback used for this statement SELECT SQL_ID, CHILD_NUMBER, SQL_TEXT, IS_REOPTIMIZABLE FROM V$SQL WHERE SQL_TEXT LIKE 'SELECT /*+gather_plan_statistics*/%'; SQL_ID CHILD_NUMBER SQL_TEXT I ------------- ------------ ----------- - b74nw722wjvy3 0 select /*+g Y ather_plan_ statistics* / * from cu stomers whe re CUST_STA TE_PROVINCE ='CA' and c ountry_id=' US' b74nw722wjvy3 1 select /*+g N ather_plan_ statistics* / * from cu stomers whe re CUST_STA TE_PROVINCE ='CA' and c ountry_id=' US' SELECT /*+gather_plan_statistics*/ CUST_EMAIL FROM CUSTOMERS WHERE CUST_STATE_PROVINCE='MA' AND COUNTRY_ID='US'; SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(FORMAT=>'ALLSTATS LAST')); PLAN_TABLE_OUTPUT ------------------------------------- SQL_ID 3tk6hj3nkcs2u, child number 0 ------------------------------------- Select /*+gather_plan_statistics*/ cust_email From customers Where cust_state_province='MA' And country_id='US' Plan hash value: 1683234692 ------------------------------------------------------------------------------- |Id | Operation | Name | Starts|E-Rows|A-Rows| A-Time |Buffers| ------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 2 |00:00:00.01| 16 | |*1 | TABLE ACCESS FULL| CUSTOMERS | 1 | 2| 2 |00:00:00.01| 16 | ----------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter(("CUST_STATE_PROVINCE"='MA' AND "COUNTRY_ID"='US')) Note ----- - dynamic sampling used for this statement (level=2) - 1 Sql Plan Directive used for this statement EXEC DBMS_SPD.FLUSH_SQL_PLAN_DIRECTIVE; SELECT TO_CHAR(d.DIRECTIVE_ID) dir_id, o.OWNER, o.OBJECT_NAME, o.SUBOBJECT_NAME col_name, o.OBJECT_TYPE, d.TYPE, d.STATE, d.REASON FROM DBA_SQL_PLAN_DIRECTIVES d, DBA_SQL_PLAN_DIR_OBJECTS o WHERE d.DIRECTIVE_ID=o.DIRECTIVE_ID AND o.OWNER IN ('SH') ORDER BY 1,2,3,4,5; DIR_ID OW OBJECT_NA COL_NAME OBJECT TYPE STATE REASON ------------------- -- --------- ---------- ------- --------------- ------------- ------------------------ 1484026771529551585 SH CUSTOMERS COUNTRY_ID COLUMN DYNAMIC_SAMPLING MISSING_STATS SINGLE TABLE CARDINALITY MISESTIMATE 1484026771529551585 SH CUSTOMERS CUST_STATE_ COLUMN DYNAMIC_SAMPLING MISSING_STATS SINGLE TABLE CARDINALITY PROVINCE MISESTIMATE 1484026771529551585 SH CUSTOMERS TABLE DYNAMIC_SAMPLING MISSING_STATS SINGLE TABLE CARDINALITY MISESTIMATE

Read the article

Unable to install Xdebug

- by burnt1ce

I've registered xdebug in php.ini (as per http://xdebug.org/docs/install) but it's not showing up when i run "php -m" or when i get a test page to run "phpinfo()". I've just installed the latest version of XAMPP. Can anyone provide any suggestions in getting xdebug to show up? This is what i get when i run phpinfo(). **PHP Version 5.3.1** System Windows NT ANDREW_LAPTOP 5.1 build 2600 (Windows XP Professional Service Pack 3) i586 Build Date Nov 20 2009 17:20:57 Compiler MSVC6 (Visual C++ 6.0) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" Server API Apache 2.0 Handler Virtual Directory Support enabled Configuration File (php.ini) Path no value Loaded Configuration File C:\xampp\php\php.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) PHP API 20090626 PHP Extension 20090626 Zend Extension 220090626 Zend Extension Build API220090626,TS,VC6 PHP Extension Build API20090626,TS,VC6 Debug Build no Thread Safety enabled Zend Memory Manager enabled Zend Multibyte Support disabled IPv6 Support enabled Registered PHP Streams https, ftps, php, file, glob, data, http, ftp, compress.zlib, compress.bzip2, phar, zip Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls Registered Stream Filters convert.iconv.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, dechunk, zlib.*, bzip2.* This program makes use of the Zend Scripting Language Engine: Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies PHP Credits Configuration apache2handler Apache Version Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Apache API Version 20051115 Server Administrator postmaster@localhost Hostname:Port localhost:80 Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100 Timeouts Connection: 300 - Keep-Alive: 5 Virtual Server No Server Root C:/xampp/apache Loaded Modules core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_auth_digest mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_cgi mod_dav mod_dav_fs mod_dav_lock mod_dir mod_env mod_headers mod_include mod_info mod_isapi mod_log_config mod_mime mod_negotiation mod_rewrite mod_setenvif mod_ssl mod_status mod_autoindex_color mod_php5 mod_perl mod_apreq2 Directive Local Value Master Value engine 1 1 last_modified 0 0 xbithack 0 0 Apache Environment Variable Value MIBDIRS C:/xampp/php/extras/mibs MYSQL_HOME C:\xampp\mysql\bin OPENSSL_CONF C:/xampp/apache/bin/openssl.cnf PHP_PEAR_SYSCONF_DIR C:\xampp\php PHPRC C:\xampp\php TMP C:\xampp\tmp HTTP_HOST localhost HTTP_CONNECTION keep-alive HTTP_USER_AGENT Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 HTTP_CACHE_CONTROL max-age=0 HTTP_ACCEPT application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_ACCEPT_ENCODING gzip,deflate,sdch HTTP_ACCEPT_LANGUAGE en-US,en;q=0.8 HTTP_ACCEPT_CHARSET ISO-8859-1,utf-8;q=0.7,*;q=0.3 PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin SystemRoot C:\WINDOWS COMSPEC C:\WINDOWS\system32\cmd.exe PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH WINDIR C:\WINDOWS SERVER_SIGNATURE <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> SERVER_SOFTWARE Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 SERVER_NAME localhost SERVER_ADDR 127.0.0.1 SERVER_PORT 80 REMOTE_ADDR 127.0.0.1 DOCUMENT_ROOT C:/xampp/htdocs SERVER_ADMIN postmaster@localhost SCRIPT_FILENAME C:/xampp/htdocs/test.php REMOTE_PORT 3275 GATEWAY_INTERFACE CGI/1.1 SERVER_PROTOCOL HTTP/1.1 REQUEST_METHOD GET QUERY_STRING no value REQUEST_URI /test.php SCRIPT_NAME /test.php HTTP Headers Information HTTP Request Headers HTTP Request GET /test.php HTTP/1.1 Host localhost Connection keep-alive User-Agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 Cache-Control max-age=0 Accept application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Encoding gzip,deflate,sdch Accept-Language en-US,en;q=0.8 Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP Response Headers X-Powered-By PHP/5.3.1 Keep-Alive timeout=5, max=80 Connection Keep-Alive Transfer-Encoding chunked Content-Type text/html bcmath BCMath support enabled Directive Local Value Master Value bcmath.scale 0 0 bz2 BZip2 Support Enabled Stream Wrapper support compress.bz2:// Stream Filter support bzip2.decompress, bzip2.compress BZip2 Version 1.0.5, 10-Dec-2007 calendar Calendar support enabled com_dotnet COM support enabled DCOM support disabled .Net support enabled Directive Local Value Master Value com.allow_dcom 0 0 com.autoregister_casesensitive 1 1 com.autoregister_typelib 0 0 com.autoregister_verbose 0 0 com.code_page no value no value com.typelib_file no value no value Core PHP Version 5.3.1 Directive Local Value Master Value allow_call_time_pass_reference On On allow_url_fopen On On allow_url_include Off Off always_populate_raw_post_data Off Off arg_separator.input & & arg_separator.output & & asp_tags Off Off auto_append_file no value no value auto_globals_jit On On auto_prepend_file no value no value browscap C:\xampp\php\extras\browscap.ini C:\xampp\php\extras\browscap.ini default_charset no value no value default_mimetype text/html text/html define_syslog_variables Off Off disable_classes no value no value disable_functions no value no value display_errors On On display_startup_errors On On doc_root no value no value docref_ext no value no value docref_root no value no value enable_dl On On error_append_string no value no value error_log no value no value error_prepend_string no value no value error_reporting 22519 22519 exit_on_timeout Off Off expose_php On On extension_dir C:\xampp\php\ext C:\xampp\php\ext file_uploads On On highlight.bg #FFFFFF #FFFFFF highlight.comment #FF8000 #FF8000 highlight.default #0000BB #0000BB highlight.html #000000 #000000 highlight.keyword #007700 #007700 highlight.string #DD0000 #DD0000 html_errors On On ignore_repeated_errors Off Off ignore_repeated_source Off Off ignore_user_abort Off Off implicit_flush Off Off include_path .;C:\xampp\php\PEAR .;C:\xampp\php\PEAR log_errors Off Off log_errors_max_len 1024 1024 magic_quotes_gpc Off Off magic_quotes_runtime Off Off magic_quotes_sybase Off Off mail.add_x_header Off Off mail.force_extra_parameters no value no value mail.log no value no value max_execution_time 60 60 max_file_uploads 20 20 max_input_nesting_level 64 64 max_input_time 60 60 memory_limit 128M 128M open_basedir no value no value output_buffering no value no value output_handler no value no value post_max_size 128M 128M precision 14 14 realpath_cache_size 16K 16K realpath_cache_ttl 120 120 register_argc_argv On On register_globals Off Off register_long_arrays Off Off report_memleaks On On report_zend_debug On On request_order no value no value safe_mode Off Off safe_mode_exec_dir no value no value safe_mode_gid Off Off safe_mode_include_dir no value no value sendmail_from no value no value sendmail_path no value no value serialize_precision 100 100 short_open_tag Off Off SMTP localhost localhost smtp_port 25 25 sql.safe_mode Off Off track_errors Off Off unserialize_callback_func no value no value upload_max_filesize 128M 128M upload_tmp_dir C:\xampp\tmp C:\xampp\tmp user_dir no value no value user_ini.cache_ttl 300 300 user_ini.filename .user.ini .user.ini variables_order GPCS GPCS xmlrpc_error_number 0 0 xmlrpc_errors Off Off y2k_compliance On On zend.enable_gc On On ctype ctype functions enabled date date/time support enabled "Olson" Timezone Database Version 2009.18 Timezone Database internal Default timezone America/New_York Directive Local Value Master Value date.default_latitude 31.7667 31.7667 date.default_longitude 35.2333 35.2333 date.sunrise_zenith 90.583333 90.583333 date.sunset_zenith 90.583333 90.583333 date.timezone America/New_York America/New_York dom DOM/XML enabled DOM/XML API Version 20031129 libxml Version 2.7.6 HTML Support enabled XPath Support enabled XPointer Support enabled Schema Support enabled RelaxNG Support enabled ereg Regex Library System library enabled exif EXIF Support enabled EXIF Version 1.4 $Id: exif.c 287372 2009-08-16 14:32:32Z iliaa $ Supported EXIF Version 0220 Supported filetypes JPEG,TIFF Directive Local Value Master Value exif.decode_jis_intel JIS JIS exif.decode_jis_motorola JIS JIS exif.decode_unicode_intel UCS-2LE UCS-2LE exif.decode_unicode_motorola UCS-2BE UCS-2BE exif.encode_jis no value no value exif.encode_unicode ISO-8859-15 ISO-8859-15 fileinfo fileinfo support enabled version 1.0.5-dev filter Input Validation and Filtering enabled Revision $Revision: 289434 $ Directive Local Value Master Value filter.default unsafe_raw unsafe_raw filter.default_flags no value no value ftp FTP support enabled gd GD Support enabled GD Version bundled (2.0.34 compatible) FreeType Support enabled FreeType Linkage with freetype FreeType Version 2.3.11 T1Lib Support enabled GIF Read Support enabled GIF Create Support enabled JPEG Support enabled libJPEG Version 7 PNG Support enabled libPNG Version 1.2.40 WBMP Support enabled XBM Support enabled JIS-mapped Japanese Font Support enabled Directive Local Value Master Value gd.jpeg_ignore_warning 0 0 gettext GetText Support enabled hash hash support enabled Hashing Engines md2 md4 md5 sha1 sha224 sha256 sha384 sha512 ripemd128 ripemd160 ripemd256 ripemd320 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru snefru256 gost adler32 crc32 crc32b salsa10 salsa20 haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5 iconv iconv support enabled iconv implementation "libiconv" iconv library version 1.13 Directive Local Value Master Value iconv.input_encoding ISO-8859-1 ISO-8859-1 iconv.internal_encoding ISO-8859-1 ISO-8859-1 iconv.output_encoding ISO-8859-1 ISO-8859-1 imap IMAP c-Client Version 2007e SSL Support enabled json json support enabled json version 1.2.1 libxml libXML support active libXML Compiled Version 2.7.6 libXML Loaded Version 20706 libXML streams enabled mbstring Multibyte Support enabled Multibyte string engine libmbfl HTTP input encoding translation disabled mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1. Multibyte (japanese) regex support enabled Multibyte regex (oniguruma) version 4.7.1 Directive Local Value Master Value mbstring.detect_order no value no value mbstring.encoding_translation Off Off mbstring.func_overload 0 0 mbstring.http_input pass pass mbstring.http_output pass pass mbstring.http_output_conv_mimetypes ^(text/|application/xhtml\+xml) ^(text/|application/xhtml\+xml) mbstring.internal_encoding no value no value mbstring.language neutral neutral mbstring.strict_detection Off Off mbstring.substitute_character no value no value mcrypt mcrypt support enabled Version 2.5.8 Api No 20021217 Supported ciphers cast-128 gost rijndael-128 twofish arcfour cast-256 loki97 rijndael-192 saferplus wake blowfish-compat des rijndael-256 serpent xtea blowfish enigma rc2 tripledes Supported modes cbc cfb ctr ecb ncfb nofb ofb stream Directive Local Value Master Value mcrypt.algorithms_dir no value no value mcrypt.modes_dir no value no value mhash MHASH support Enabled MHASH API Version Emulated Support ming Ming SWF output library enabled Version 0.4.3 mysql MySQL Support enabled Active Persistent Links 0 Active Links 0 Client API version 5.1.41 Directive Local Value Master Value mysql.allow_local_infile On On mysql.allow_persistent On On mysql.connect_timeout 60 60 mysql.default_host no value no value mysql.default_password no value no value mysql.default_port 3306 3306 mysql.default_socket MySQL MySQL mysql.default_user no value no value mysql.max_links Unlimited Unlimited mysql.max_persistent Unlimited Unlimited mysql.trace_mode Off Off mysqli MysqlI Support enabled Client API library version 5.1.41 Active Persistent Links 0 Inactive Persistent Links 0 Active Links 0 Client API header version 5.1.41 MYSQLI_SOCKET MySQL Directive Local Value Master Value mysqli.allow_local_infile On On mysqli.allow_persistent On On mysqli.default_host no value no value mysqli.default_port 3306 3306 mysqli.default_pw no value no value mysqli.default_socket MySQL MySQL mysqli.default_user no value no value mysqli.max_links Unlimited Unlimited mysqli.max_persistent Unlimited Unlimited mysqli.reconnect Off Off mysqlnd mysqlnd enabled Version mysqlnd 5.0.5-dev - 081106 - $Revision: 289630 $ Command buffer size 4096 Read buffer size 32768 Read timeout 31536000 Collecting statistics Yes Collecting memory statistics No Client statistics bytes_sent 0 bytes_received 0 packets_sent 0 packets_received 0 protocol_overhead_in 0 protocol_overhead_out 0 bytes_received_ok_packet 0 bytes_received_eof_packet 0 bytes_received_rset_header_packet 0 bytes_received_rset_field_meta_packet 0 bytes_received_rset_row_packet 0 bytes_received_prepare_response_packet 0 bytes_received_change_user_packet 0 packets_sent_command 0 packets_received_ok 0 packets_received_eof 0 packets_received_rset_header 0 packets_received_rset_field_meta 0 packets_received_rset_row 0 packets_received_prepare_response 0 packets_received_change_user 0 result_set_queries 0 non_result_set_queries 0 no_index_used 0 bad_index_used 0 slow_queries 0 buffered_sets 0 unbuffered_sets 0 ps_buffered_sets 0 ps_unbuffered_sets 0 flushed_normal_sets 0 flushed_ps_sets 0 ps_prepared_never_executed 0 ps_prepared_once_executed 0 rows_fetched_from_server_normal 0 rows_fetched_from_server_ps 0 rows_buffered_from_client_normal 0 rows_buffered_from_client_ps 0 rows_fetched_from_client_normal_buffered 0 rows_fetched_from_client_normal_unbuffered 0 rows_fetched_from_client_ps_buffered 0 rows_fetched_from_client_ps_unbuffered 0 rows_fetched_from_client_ps_cursor 0 rows_skipped_normal 0 rows_skipped_ps 0 copy_on_write_saved 0 copy_on_write_performed 0 command_buffer_too_small 0 connect_success 0 connect_failure 0 connection_reused 0 reconnect 0 pconnect_success 0 active_connections 0 active_persistent_connections 0 explicit_close 0 implicit_close 0 disconnect_close 0 in_middle_of_command_close 0 explicit_free_result 0 implicit_free_result 0 explicit_stmt_close 0 implicit_stmt_close 0 mem_emalloc_count 0 mem_emalloc_ammount 0 mem_ecalloc_count 0 mem_ecalloc_ammount 0 mem_erealloc_count 0 mem_erealloc_ammount 0 mem_efree_count 0 mem_malloc_count 0 mem_malloc_ammount 0 mem_calloc_count 0 mem_calloc_ammount 0 mem_realloc_count 0 mem_realloc_ammount 0 mem_free_count 0 proto_text_fetched_null 0 proto_text_fetched_bit 0 proto_text_fetched_tinyint 0 proto_text_fetched_short 0 proto_text_fetched_int24 0 proto_text_fetched_int 0 proto_text_fetched_bigint 0 proto_text_fetched_decimal 0 proto_text_fetched_float 0 proto_text_fetched_double 0 proto_text_fetched_date 0 proto_text_fetched_year 0 proto_text_fetched_time 0 proto_text_fetched_datetime 0 proto_text_fetched_timestamp 0 proto_text_fetched_string 0 proto_text_fetched_blob 0 proto_text_fetched_enum 0 proto_text_fetched_set 0 proto_text_fetched_geometry 0 proto_text_fetched_other 0 proto_binary_fetched_null 0 proto_binary_fetched_bit 0 proto_binary_fetched_tinyint 0 proto_binary_fetched_short 0 proto_binary_fetched_int24 0 proto_binary_fetched_int 0 proto_binary_fetched_bigint 0 proto_binary_fetched_decimal 0 proto_binary_fetched_float 0 proto_binary_fetched_double 0 proto_binary_fetched_date 0 proto_binary_fetched_year 0 proto_binary_fetched_time 0 proto_binary_fetched_datetime 0 proto_binary_fetched_timestamp 0 proto_binary_fetched_string 0 proto_binary_fetched_blob 0 proto_binary_fetched_enum 0 proto_binary_fetched_set 0 proto_binary_fetched_geometry 0 proto_binary_fetched_other 0 init_command_executed_count 0 init_command_failed_count 0 odbc ODBC Support enabled Active Persistent Links 0 Active Links 0 ODBC library Win32 Directive Local Value Master Value odbc.allow_persistent On On odbc.check_persistent On On odbc.default_cursortype Static cursor Static cursor odbc.default_db no value no value odbc.default_pw no value no value odbc.default_user no value no value odbc.defaultbinmode return as is return as is odbc.defaultlrl return up to 4096 bytes return up to 4096 bytes odbc.max_links Unlimited Unlimited odbc.max_persistent Unlimited Unlimited openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8l 5 Nov 2009 OpenSSL Header Version OpenSSL 0.9.8l 5 Nov 2009 pcre PCRE (Perl Compatible Regular Expressions) Support enabled PCRE Library Version 8.00 2009-10-19 Directive Local Value Master Value pcre.backtrack_limit 100000 100000 pcre.recursion_limit 100000 100000 pdf PDF Support enabled PDFlib GmbH Version 7.0.4p4 PECL Version 2.1.6 Revision $Revision: 277110 $ PDO PDO support enabled PDO drivers mysql, odbc, sqlite, sqlite2 pdo_mysql PDO Driver for MySQL enabled Client API version 5.1.41 PDO_ODBC PDO Driver for ODBC (Win32) enabled ODBC Connection Pooling Enabled, strict matching pdo_sqlite PDO Driver for SQLite 3.x enabled SQLite Library 3.6.20 Phar Phar: PHP Archive support enabled Phar EXT version 2.0.1 Phar API version 1.1.1 CVS revision $Revision: 286338 $ Phar-based phar archives enabled Tar-based phar archives enabled ZIP-based phar archives enabled gzip compression enabled bzip2 compression enabled Native OpenSSL support enabled Phar based on pear/PHP_Archive, original concept by Davey Shafik. Phar fully realized by Gregory Beaver and Marcus Boerger. Portions of tar implementation Copyright (c) 2003-2009 Tim Kientzle. Directive Local Value Master Value phar.cache_list no value no value phar.readonly On On phar.require_hash On On Reflection Reflection enabled Version $Revision: 287991 $ session Session Support enabled Registered save handlers files user sqlite Registered serializer handlers php php_binary wddx Directive Local Value Master Value session.auto_start Off Off session.bug_compat_42 On On session.bug_compat_warn On On session.cache_expire 180 180 session.cache_limiter nocache nocache session.cookie_domain no value no value session.cookie_httponly Off Off session.cookie_lifetime 0 0 session.cookie_path / / session.cookie_secure Off Off session.entropy_file no value no value session.entropy_length 0 0 session.gc_divisor 100 100 session.gc_maxlifetime 1440 1440 session.gc_probability 1 1 session.hash_bits_per_character 5 5 session.hash_function 0 0 session.name PHPSESSID PHPSESSID session.referer_check no value no value session.save_handler files files session.save_path C:\xampp\tmp C:\xampp\tmp session.serialize_handler php php session.use_cookies On On session.use_only_cookies Off Off session.use_trans_sid 0 0 SimpleXML Simplexml support enabled Revision $Revision: 281953 $ Schema support enabled soap Soap Client enabled Soap Server enabled Directive Local Value Master Value soap.wsdl_cache 1 1 soap.wsdl_cache_dir /tmp /tmp soap.wsdl_cache_enabled 1 1 soap.wsdl_cache_limit 5 5 soap.wsdl_cache_ttl 86400 86400 sockets Sockets Support enabled SPL SPL support enabled Interfaces Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject Classes AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilesystemIterator, FilterIterator, GlobIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, MultipleIterator, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RecursiveTreeIterator, RegexIterator, RuntimeException, SplDoublyLinkedList, SplFileInfo, SplFileObject, SplFixedArray, SplHeap, SplMinHeap, SplMaxHeap, SplObjectStorage, SplPriorityQueue, SplQueue, SplStack, SplTempFileObject, UnderflowException, UnexpectedValueException SQLite SQLite support enabled PECL Module version 2.0-dev $Id: sqlite.c 289598 2009-10-12 22:37:52Z pajoye $ SQLite Library 2.8.17 SQLite Encoding iso8859 Directive Local Value Master Value sqlite.assoc_case 0 0 sqlite3 SQLite3 support enabled SQLite3 module version 0.7-dev SQLite Library 3.6.20 Directive Local Value Master Value sqlite3.extension_dir no value no value standard Dynamic Library Support enabled Internal Sendmail Support for Windows enabled Directive Local Value Master Value assert.active 1 1 assert.bail 0 0 assert.callback no value no value assert.quiet_eval 0 0 assert.warning 1 1 auto_detect_line_endings 0 0 default_socket_timeout 60 60 safe_mode_allowed_env_vars PHP_ PHP_ safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH url_rewriter.tags a=href,area=href,frame=src,input=src,form=,fieldset= a=href,area=href,frame=src,input=src,form=,fieldset= user_agent no value no value tokenizer Tokenizer Support enabled wddx WDDX Support enabled WDDX Session Serializer enabled xml XML Support active XML Namespace Support active libxml2 Version 2.7.6 xmlreader XMLReader enabled xmlrpc core library version xmlrpc-epi v. 0.54 php extension version 0.51 author Dan Libby homepage http://xmlrpc-epi.sourceforge.net open sourced by Epinions.com xmlwriter XMLWriter enabled xsl XSL enabled libxslt Version 1.1.26 libxslt compiled against libxml Version 2.7.6 EXSLT enabled libexslt Version 1.1.26 zip Zip enabled Extension Version $Id: php_zip.c 276389 2009-02-24 23:55:14Z iliaa $ Zip version 1.9.1 Libzip version 0.9.0 zlib ZLib Support enabled Stream Wrapper support compress.zlib:// Stream Filter support zlib.inflate, zlib.deflate Compiled Version 1.2.3 Linked Version 1.2.3 Directive Local Value Master Value zlib.output_compression Off Off zlib.output_compression_level -1 -1 zlib.output_handler no value no value Additional Modules Module Name Environment Variable Value no value ::=::\ no value C:=C:\xampp ALLUSERSPROFILE C:\Documents and Settings\All Users APPDATA C:\Documents and Settings\Andrew\Application Data CHROME_RESTART Google Chrome|Whoa! Google Chrome has crashed. Restart now?|LEFT_TO_RIGHT CHROME_VERSION 5.0.342.8 CLASSPATH .;C:\Program Files\QuickTime\QTSystem\QTJava.zip CommonProgramFiles C:\Program Files\Common Files COMPUTERNAME ANDREW_LAPTOP ComSpec C:\WINDOWS\system32\cmd.exe FP_NO_HOST_CHECK NO HOMEDRIVE C: HOMEPATH \Documents and Settings\Andrew LOGONSERVER \\ANDREW_LAPTOP NUMBER_OF_PROCESSORS 2 OS Windows_NT PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH PROCESSOR_ARCHITECTURE x86 PROCESSOR_IDENTIFIER x86 Family 6 Model 15 Stepping 10, GenuineIntel PROCESSOR_LEVEL 6 PROCESSOR_REVISION 0f0a ProgramFiles C:\Program Files PROMPT $P$G QTJAVA C:\Program Files\QuickTime\QTSystem\QTJava.zip SESSIONNAME Console sfxcmd "C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe" sfxname C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe SystemDrive C: SystemRoot C:\WINDOWS TEMP C:\DOCUME~1\Andrew\LOCALS~1\Temp TMP C:\DOCUME~1\Andrew\LOCALS~1\Temp USERDOMAIN ANDREW_LAPTOP USERNAME Andrew USERPROFILE C:\Documents and Settings\Andrew VS100COMNTOOLS C:\Program Files\Microsoft Visual Studio 10.0\Common7\Tools\ windir C:\WINDOWS AP_PARENT_PID 2216 PHP Variables Variable Value _SERVER["MIBDIRS"] C:/xampp/php/extras/mibs _SERVER["MYSQL_HOME"] C:\xampp\mysql\bin _SERVER["OPENSSL_CONF"] C:/xampp/apache/bin/openssl.cnf _SERVER["PHP_PEAR_SYSCONF_DIR"] C:\xampp\php _SERVER["PHPRC"] C:\xampp\php _SERVER["TMP"] C:\xampp\tmp _SERVER["HTTP_HOST"] localhost _SERVER["HTTP_CONNECTION"] keep-alive _SERVER["HTTP_USER_AGENT"] Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 _SERVER["HTTP_CACHE_CONTROL"] max-age=0 _SERVER["HTTP_ACCEPT"] application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 _SERVER["HTTP_ACCEPT_ENCODING"] gzip,deflate,sdch _SERVER["HTTP_ACCEPT_LANGUAGE"] en-US,en;q=0.8 _SERVER["HTTP_ACCEPT_CHARSET"] ISO-8859-1,utf-8;q=0.7,*;q=0.3 _SERVER["PATH"] C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin _SERVER["SystemRoot"] C:\WINDOWS _SERVER["COMSPEC"] C:\WINDOWS\system32\cmd.exe _SERVER["PATHEXT"] .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH _SERVER["WINDIR"] C:\WINDOWS _SERVER["SERVER_SIGNATURE"] <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> _SERVER["SERVER_SOFTWARE"] Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 _SERVER["SERVER_NAME"] localhost _SERVER["SERVER_ADDR"] 127.0.0.1 _SERVER["SERVER_PORT"] 80 _SERVER["REMOTE_ADDR"] 127.0.0.1 _SERVER["DOCUMENT_ROOT"] C:/xampp/htdocs _SERVER["SERVER_ADMIN"] postmaster@localhost _SERVER["SCRIPT_FILENAME"] C:/xampp/htdocs/test.php _SERVER["REMOTE_PORT"] 3275 _SERVER["GATEWAY_INTERFACE"] CGI/1.1 _SERVER["SERVER_PROTOCOL"] HTTP/1.1 _SERVER["REQUEST_METHOD"] GET _SERVER["QUERY_STRING"] no value _SERVER["REQUEST_URI"] /test.php _SERVER["SCRIPT_NAME"] /test.php _SERVER["PHP_SELF"] /test.php _SERVER["REQUEST_TIME"] 1270600868 _SERVER["argv"] Array ( ) _SERVER["argc"] 0 PHP License This program is free software; you can redistribute it and/or modify it under the terms of the PHP License as published by the PHP Group and included in the distribution in the file: LICENSE This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. If you did not receive a copy of the PHP license, or have any questions about PHP licensing, please contact [email protected].

Read the article

Create a Unit Conversion Application with the Zend_Measure Component

Learn how to create a simple conversion calculator using the Zend Framework's Zend_Measure component ...

Read the article

Create a Unit Conversion Application with the Zend_Measure Component

Learn how to create a simple conversion calculator using the Zend Framework's Zend_Measure component ...

Read the article

Apache2 Segfault - need help interpreting this coredump (suspect cause is memcache / php session related)

- by WayneDV

Three Apache2 web servers running a PHP 5.2.3 web site. We're using Memcache to cache rendered pages but also as the storage engine of the PHP Sessions. At peak traffic times we're getting Apache segmentation faults on all three web servers and all HTTPD child processes segfault. My gut tells me that the increased Memcache traffic is stopping PHP sessions from being created or cleaned up and thus the processes die. Is it possible for someone to confirm that from the following? : #0 _zend_mm_free_int (heap=0x7fb67a075820, p=0x7fb67a011538) at /usr/src/debug/php-5.3.3/Zend/zend_alloc.c:2018 #1 0x00007fb665d02e82 in mmc_buffer_free (request=0x7fb67a011548) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:50 #2 mmc_request_free (request=0x7fb67a011548) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:169 #3 0x00007fb665d031ea in mmc_pool_free (pool=0x7fb67a00e458) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:917 #4 0x00007fb665d0a2f1 in ps_close_memcache (mod_data=0x7fb66d625440) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_session.c:185 #5 0x00007fb66d1b0935 in php_session_save_current_state () at /usr/src/debug/php-5.3.3/ext/session/session.c:625 #6 php_session_flush () at /usr/src/debug/php-5.3.3/ext/session/session.c:1517 #7 0x00007fb66d1b0c1b in zm_deactivate_session (type=<value optimized out>, module_number=<value optimized out>) at /usr/src/debug/php-5.3.3/ext/session/session.c:2171 #8 0x00007fb66d2a719c in module_registry_cleanup (module=<value optimized out>) at /usr/src/debug/php-5.3.3/Zend/zend_API.c:2150 #9 0x00007fb66d2b1994 in zend_hash_reverse_apply (ht=0x7fb66d629d60, apply_func=0x7fb66d2a7180 <module_registry_cleanup>) at /usr/src/debug/php-5.3.3/Zend/zend_hash.c:755 #10 0x00007fb66d2a5c0d in zend_deactivate_modules () at /usr/src/debug/php-5.3.3/Zend/zend.c:866 #11 0x00007fb66d2541b5 in php_request_shutdown (dummy=<value optimized out>) at /usr/src/debug/php-5.3.3/main/main.c:1607 #12 0x00007fb66d32e037 in php_apache_request_dtor (r=0x7fb67a229658) at /usr/src/debug/php-5.3.3/sapi/apache2handler/sapi_apache2.c:509 #13 php_handler (r=0x7fb67a229658) at /usr/src/debug/php-5.3.3/sapi/apache2handler/sapi_apache2.c:681 #14 0x00007fb6784166f0 in ap_run_handler (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/server/config.c:158 #15 0x00007fb678419f58 in ap_invoke_handler (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/server/config.c:372 #16 0x00007fb6784254f0 in ap_process_request (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/modules/http/http_request.c:282 #17 0x00007fb678422418 in ap_process_http_connection (c=0x7fb67a2193a8) at /usr/src/debug/httpd-2.2.15/modules/http/http_core.c:190 #18 0x00007fb67841e1b8 in ap_run_process_connection (c=0x7fb67a2193a8) at /usr/src/debug/httpd-2.2.15/server/connection.c:43 #19 0x00007fb678429f4b in child_main (child_num_arg=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:662 #20 0x00007fb67842a21a in make_child (s=0x7fb679cd7860, slot=153) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:758 #21 0x00007fb67842aea4 in perform_idle_server_maintenance (_pconf=<value optimized out>, plog=<value optimized out>, s=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:893 #22 ap_mpm_run (_pconf=<value optimized out>, plog=<value optimized out>, s=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:1097 #23 0x00007fb678402890 in main (argc=1, argv=0x7fff6fecacb8) at /usr/src/debug/httpd-2.2.15/server/main.c:740 PHP.INI Follows: [PHP] engine = On short_open_tag = On asp_tags = Off precision = 14 y2k_compliance = On output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = 100 allow_call_time_pass_reference = Off safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH disable_functions = disable_classes = expose_php = On max_execution_time = 30 max_input_time = 60 memory_limit = 128M error_reporting = E_ALL & ~E_DEPRECATED display_errors = Off display_startup_errors = Off log_errors = Off log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On track_errors = Off html_errors = Off variables_order = "GPCS" request_order = "GP" register_globals = Off register_long_arrays = Off register_argc_argv = Off auto_globals_jit = On post_max_size = 8M magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" doc_root = user_dir = enable_dl = Off file_uploads = On upload_max_filesize = 2M allow_url_fopen = On allow_url_include = Off default_socket_timeout = 60 [Date] [filter] [iconv] [intl] [sqlite] [sqlite3] [Pcre] [Pdo] [Phar] [Syslog] define_syslog_variables = Off [mail function] SMTP = localhost smtp_port = 25 sendmail_path = /usr/sbin/sendmail -t -i mail.add_x_header = On [SQL] sql.safe_mode = Off [ODBC] odbc.allow_persistent = On odbc.check_persistent = On odbc.max_persistent = -1 odbc.max_links = -1 odbc.defaultlrl = 4096 odbc.defaultbinmode = 1 [MySQL] mysql.allow_persistent = On mysql.max_persistent = -1 mysql.max_links = -1 mysql.default_port = mysql.default_socket = mysql.default_host = mysql.default_user = mysql.default_password = mysql.connect_timeout = 60 mysql.trace_mode = Off [MySQLi] mysqli.max_links = -1 mysqli.default_port = 3306 mysqli.default_socket = mysqli.default_host = mysqli.default_user = mysqli.default_pw = mysqli.reconnect = Off [PostgresSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off pgsql.max_persistent = -1 pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [Sybase-CT] sybct.allow_persistent = On sybct.max_persistent = -1 sybct.max_links = -1 sybct.min_server_severity = 10 sybct.min_client_severity = 10 [bcmath] bcmath.scale = 0 [browscap] [Session] session.save_handler = files session.save_path = "/var/lib/php/session" session.use_cookies = 1 session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 1 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.serialize_handler = php session.gc_probability = 1 session.gc_divisor = 1000 session.gc_maxlifetime = 1440 session.bug_compat_42 = Off session.bug_compat_warn = Off session.referer_check = session.entropy_length = 0 session.entropy_file = session.cache_limiter = nocache session.cache_expire = 180 session.use_trans_sid = 0 session.hash_function = 0 session.hash_bits_per_character = 5 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] mssql.allow_persistent = On mssql.max_persistent = -1 mssql.max_links = -1 mssql.min_error_severity = 10 mssql.min_message_severity = 10 mssql.compatability_mode = Off mssql.secure_connection = Off [Assertion] [COM] [mbstring] [gd] [exif] [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 /etc/php.d/memcached.ini : session.save_path="tcp://memcache1:11211?persistent=1&weight=1&timeout=3&retry_interval=15"

Search Results

Search found 1842 results on 74 pages for 'zend optimizer'.

Page 54/74 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61 | Next Page >

- by pinaldave

- by Maria Colgan

- by Joshak

- by papanel

- by Burning the Codeigniter

- by kander

- by TiernanO

- by microsumol

- by microsumol

- by GrumpyCanuck

- by ashgromnies

- by Rob Farley

- by Rob Farley

- by Guntis

- by Shubham

- by pinaldave

- by Akshay Deep Lamba

- by Maria Colgan

- by David Turner

- by Dave Ballantyne

- by Liu Maclean(???)

- by burnt1ce

- by WayneDV

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61 | Next Page >