Search Results

Search found 15241 results on 610 pages for 'solaris operating environment'.

Page 541/610 | < Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >

  • Memcache error: Failed reading line from stream (0) Array

    - by daviddripps
    I get some variation of the following error when our server gets put under any significant load. I've Googled for hours about it and tried everything (including upgrading to the latest versions and clean installs). I've read all the posts about it here on SA, but can't figure it out. A lot of people are having the same problem, but no one seems to have a definitive answer. Any help would be greatly appreciated. Thanks in advance. Fatal error: Uncaught exception 'Zend_Session_Exception' with message 'Zend_Session::start() - /var/www/trunk/library/Zend/Cache/Backend/Memcached.php(Line:180): Error #8 Memcache::get() [memcache.get]: Server localhost (tcp 11211) failed with: Failed reading line from stream (0) Array We have a copy of our production environment for testing and everything works great until we start load-testing. I think the biggest object stored is about 170KB, but it will probably be about 500KB when all is said and done (well below the 1MB limit). Just FYI: Memcache gets hit about 10-20 times per page load. Here's the memcached settings: PORT="11211" USER="memcached" MAXCONN="1024" CACHESIZE="64" OPTIONS="" I'm running Memcache 1.4.5 with version 2.2.6 of the PHP-memcache module. PHP is version 5.2.6. memcache details from php -i: memcache memcache support = enabled Active persistent connections = 0 Version = 2.2.6 Revision = $Revision: 303962 $ Directive = Local Value = Master Value memcache.allow_failover = 1 = 1 memcache.chunk_size = 8192 = 8192 memcache.default_port = 11211 = 11211 memcache.default_timeout_ms = 1000 = 1000 memcache.hash_function = crc32 = crc32 memcache.hash_strategy = standard = standard memcache.max_failover_attempts = 20 = 20 Thanks everyone

    Read the article

  • How is external memory, internal memory, and cache organized?

    - by goldenmean
    Consider a system as follows:= A hardware board having say ARM Cortex-A8 and Neon Vector coprocessor, and Embedded Linux OS running on Cortex-A8. On this environment, if there is some application - say, a video decoder is executing - then: How is it decided that which buffers would be in external memory, which ones would be allocated in internal SRAM, etc. When one says calloc/malloc on such system/code, the pointer returned is from which memory: internal or external? Can a user make buffers to be allocated to the memories of his choice (internal/external)? In ARM architectures, there is another memory called as Tightly coupled memory (TCM). What is that and how can user enable and use it? Can I declare buffers in this memory? Do I need to see the memory map (if any) of the hardware board to understand about all these different physical memories present in a typical hardware board? How much of a role does the OS play in distinguishing these different memories? Sorry for multiple questions, but i think they all are interlinked.

    Read the article

  • Same session and session ID for different subdomains in Grails project - How can I do that?

    - by fluxon
    I am currently working on a project that supports multiple languages. In order to be seo friendly, I am trying to redirect users subdomains corresponding to their locale (or their preferred language). I.e., my projects's url is mydomain.com and I work with the subdomains en.mydomain.com, es.mydomain.com, de.mydomain.com, fr.mydomain.com ... you get the idea. All subdomains are served by the same grails app for now. What happens is that my grails project maintains different sessions (as seen by the session ids) for every single subdomain, hence information is lost, when a user switches between languages. I had not forseen that. :( How can I explicitly set the session identifier? I would like it to be based on just mydomain.com. I got the hint that Apache Tomcat offers something like <Context sessionCookiePath="/" sessionCookieDomain=".mydomain.com"> , but that does not help for the devel environment etc. Any hints? Have you tried storing session information in the DB? This is sometimes used for load-balancing purposes and might help here as well?! Help is highly appreciated (as always)! Cheers!

    Read the article

  • In which domains are message oriented middleware like AMQP useful?

    - by cocotwo
    What problem do MOM (Message Oriented Middleware) solve? Scalability? Integration? In which domain are they typically used and in which domains are they typically not used? For example, say, is Google using such solution for it's main search engine or to power GMail? What about big websites like Walmart, eBay, FedEx (pretty much a Java shop) and buy.com (pretty much an MS shop)? Does MOM solve a need there? Does it make any sense when you're writing a Webapp where you control the server-side and have an homogenous environment (say tens of Amazon EC2 instances all running Linux + Java JVMs) there and where the clients are, well, Web browsers? Does it make sense for desktop apps that need to communicate with a server? Or is it 'only' for big enterprise stuff where you typically have a happy mix of countless of different systems that needs to communicate in a way or another? I'm a bit confused as to what they're useful for and I think that with example of where they're appropriate and where they're not appropriate I could better understand their use.

    Read the article

  • Where should an application's default folder live?

    - by HotOil
    Hi: I'm creating a little app that configures a connected device and then saves the config information in a file. The filename cannot be chosen by the user, but its location can be chosen. Where is the best place for the app's default save-to folder? I have seen examples out there where it is the "MyDocuments" location (eg Visual Studio does this). I have seen a folder created right at the top of the C:\ drive. I find that to be a little obnoxious, personally. It could be in the Program Files[Manufacturer] or Program Files[Product Name], or wherever the app was installed. I have used this location in the past; I dislike it because Windows Explorer does not allow a user to browse to there very easily ('browsability'). Going with this last notion that 'browsability' is a factor, I suppose MyDocuments is the best choice. Is this the most common, most widely accepted practice? I think historically we have chosen the install folder because that co-locates the data with the device management utilities. But I would really like to get away from that. I don't want the user to have to go pawing through system files to find his/her data, esp if that person is not too Windows-savvy. Also, I am using the .NET WinForms FolderBrowserDialog, and the "Environment.SpecialFolders" enum isn't helpful in setting up the dialog to point into the Program Files folder. Thanks for your input! Suz.

    Read the article

  • Wrapping unmanaged C++ with C++/CLI - a proper approach.

    - by Jamie
    Hi there, as stated in the title, I want to have my old C++ library working in managed .NET. I think of two possibilities: 1) I might try to compile the library with /clr and try "It Just Works" approach. 2) I might write a managed wrapper to the unmanaged library. First of all, I want to have my library working FAST, as it was in unmanaged environment. Thus, I am not sure if the first approach will not cause a large decrease in performance. However, it seems to be faster to implement (not a right word :-)) (assuming it will work for me). On the other hand, I think of some problems that might appear while writing a wrapper (e.g. how to wrap some STL collection (vector for instance)?) I think of writing a wrapper residing in the same project as the unmanaged C++ resides - is that a reasonable approach (e.g. MyUnmanagedClass and MyManagedClass in the same project, the second wrapping the other)? What would you suggest in that problem? Which solution is going to give me better performance of the resulting code? Thank you in advance for any suggestions and clues! Cheers

    Read the article

  • rabbitmq-erlang-client, using rebar friendly pkg, works on dev env fails on rebar release

    - by lfurrea
    I am successfully using the rebar-friendly package of rabbitmq-erlang-client for a simple Hello World rebarized and OTP "compliant" app and things work fine on the dev environment. I am able to fire up an erl console and do my application:start(helloworld). and connect to the broker, open up a channel and communicate to queues. However, then I proceed to do rebar generate and it builds up the release just fine, but when I try to fire up from the self contained release package then things suddenly explode. I know rebar releases are known to be an obscure art, but I would like to know what are my options as far as deployment for an app using the rabbitmq-erlang-client. Below you will find the output of the console on the crash: =INFO REPORT==== 18-Dec-2012::16:41:35 === application: session_record exited: {{{badmatch, {error, {'EXIT', {undef, [{amqp_connection_sup,start_link, [{amqp_params_network,<<"guest">>,<<"guest">>,<<"/">>, "127.0.0.1",5672,0,0,0,infinity,none, [#Fun<amqp_auth_mechanisms.plain.3>, #Fun<amqp_auth_mechanisms.amqplain.3>], [],[]}], []}, {supervisor2,do_start_child_i,3, [{file,"src/supervisor2.erl"},{line,391}]}, {supervisor2,handle_call,3, [{file,"src/supervisor2.erl"},{line,413}]}, {gen_server,handle_msg,5, [{file,"gen_server.erl"},{line,588}]}, {proc_lib,init_p_do_apply,3, [{file,"proc_lib.erl"},{line,227}]}]}}}}, [{amqp_connection,start,1, [{file,"src/amqp_connection.erl"},{line,164}]}, {hello_qp,start_link,0,[{file,"src/hello_qp.erl"},{line,10}]}, {session_record_sup,init,1, [{file,"src/session_record_sup.erl"},{line,55}]}, {supervisor_bridge,init,1, [{file,"supervisor_bridge.erl"},{line,79}]}, {gen_server,init_it,6,[{file,"gen_server.erl"},{line,304}]}, {proc_lib,init_p_do_apply,3, [{file,"proc_lib.erl"},{line,227}]}]}, {session_record_app,start,[normal,[]]}} type: permanent

    Read the article

  • SQL putting two single quotes around datetime fields and fails to insert record

    - by user82613
    I am trying to INSERT into an SQL database table, but it doesn't work. So I used the SQL server profiler to see how it was building the query; what it shows is the following: declare @p1 int set @p1=0 declare @p2 int set @p2=0 declare @p3 int set @p3=1 exec InsertProcedureName @ConsumerMovingDetailID=@p1 output, @UniqueID=@p2 output, @ServiceID=@p3 output, @ProjectID=N'0', @IPAddress=N'66.229.112.168', @FirstName=N'Mike', @LastName=N'P', @Email=N'[email protected]', @PhoneNumber=N'(254)637-1256', @MobilePhone=NULL, @CurrentAddress=N'', @FromZip=N'10005', @MoveInAddress=N'', @ToZip=N'33067', @MovingSize=N'1', @MovingDate=''2009-04-30 00:00:00:000'', /* Problem here ^^^ */ @IsMovingVehicle=0, @IsPackingRequired=0, @IncludeInSaveologyPlanner=1 select @p1, @p2, @p3 As you can see, it puts a double quote two pairs of single quotes around the datetime fields, so that it produces a syntax error in SQL. I wonder if there is anything I must configure somewhere? Any help would be appreciated. Here is the environment details: Visual Studio 2008 .NET 3.5 MS SQL Server 2005 Here is the .NET code I'm using.... //call procedure for results strStoredProcedureName = "usp_SMMoverSearchResult_SELECT"; Database database = DatabaseFactory.CreateDatabase(); DbCommand dbCommand = database.GetStoredProcCommand(strStoredProcedureName); dbCommand.CommandTimeout = DataHelper.CONNECTION_TIMEOUT; database.AddInParameter(dbCommand, "@MovingDetailID", DbType.String, objPropConsumer.ConsumerMovingDetailID); database.AddInParameter(dbCommand, "@FromZip", DbType.String, objPropConsumer.FromZipCode); database.AddInParameter(dbCommand, "@ToZip", DbType.String, objPropConsumer.ToZipCode); database.AddInParameter(dbCommand, "@MovingDate", DbType.DateTime, objPropConsumer.MoveDate); database.AddInParameter(dbCommand, "@PLServiceID", DbType.Int32, objPropConsumer.ServiceID); database.AddInParameter(dbCommand, "@FromAreaCode", DbType.String, pFromAreaCode); database.AddInParameter(dbCommand, "@FromState", DbType.String, pFromState); database.AddInParameter(dbCommand, "@ToAreaCode", DbType.String, pToAreaCode); database.AddInParameter(dbCommand, "@ToState", DbType.String, pToState); DataSet dstSearchResult = new DataSet("MoverSearchResult"); database.LoadDataSet(dbCommand, dstSearchResult, new string[] { "MoverSearchResult" });

    Read the article

  • Rails log shows unexpected data as to the time spent on a DB stuff

    - by Arhimed
    I'm running on WinXP + Ruby 1.8.6 + Rails 2.3.5 (frozen to the project) in development environment. Looking at development.log I observe inconsistent data as to the time spent on a database stuff. Example #1 (good): Processing PagesController#index (for 127.0.0.1 at 2010-05-11 12:15:54) [GET] Parameters: {"action"=>"index", "controller"=>"pages"} City Columns (563.0ms) SHOW FIELDS FROM `cities` City Load (15.0ms) SELECT * FROM `cities` WHERE (`cities`.`short_name` = 'NY') LIMIT 1 Redirected to http://xyz:3000/sightings Completed in 953ms (DB: 578) | 302 Found [http://xyz/] Example #2 (unexpected): Processing PagesController#index (for 127.0.0.1 at 2010-05-11 12:15:36) [GET] Parameters: {"action"=>"index", "controller"=>"pages"} City Columns (0.0ms) SHOW FIELDS FROM `cities` City Load (0.0ms) SELECT * FROM `cities` WHERE (`cities`.`short_name` = 'NY') LIMIT 1 Redirected to http://xyz:3000/sightings Completed in 47ms (DB: 32) | 302 Found [http://xyz/] Example #2 shows 32ms were spent on DB while there were just 2 sql querries and both of zero time spent. Example #3 (unexpected): Processing PagesController#index (for 127.0.0.1 at 2010-05-11 11:21:24) [GET] Parameters: {"action"=>"index", "controller"=>"pages"} City Columns (63.0ms) SHOW FIELDS FROM `cities` City Load (62.0ms) SELECT * FROM `cities` WHERE (`cities`.`short_name` = 'NY') LIMIT 1 Redirected to http://xyz:3000/sightings Completed in 1187ms (DB: 297) | 302 Found [http://xyz/] Example #3 shows 297ms while there were querries of 63ms and 62ms (125ms in total). Can't understand it. Could someone explain? Thanks in advance.

    Read the article

  • Are bad data issues that common?

    - by Water Cooler v2
    I've worked for clients that had a large number of distinct, small to mid-sized projects, each interacting with each other via properly defined interfaces to share data, but not reading and writing to the same database. Each had their own separate database, their own cache, their own file servers/system that they had dedicated access to, and so they never caused any problems. One of these clients is a mobile content vendor, so they're lucky in a way that they do not have to face the same problems that everyday business applications do. They can create all those separate compartments where their components happily live in isolation of the others. However, for many business applications, this is not possible. I've worked with a few clients, one of whose applications I am doing the production support for, where there are "bad data issues" on an hourly basis. Yeah, it's that crazy. Some data records from one of the instances (lower than production, of course) would have been run a couple of weeks ago, and caused some other user's data to get corrupted. And then, a data script will have to be written to fix this issue. And I've seen this happening so much with this client that I have to ask. I've seen this happening at a moderate rate with other clients, but this one just seems to be out of order. If you're working with business applications that share a large amount of data by reading and writing to/from the same database, are "bad data issues" that common in your environment?

    Read the article

  • Open an Emacs buffer when a command tries to open an editor in shell-mode

    - by Chris Conway
    I like to use Emacs' shell mode, but it has a few deficiencies. One of those is that it's not smart enough to open a new buffer when a shell command tries to invoke an editor. For example with the environment variable VISUAL set to vim I get the following from svn propedit: $ svn propedit svn:externals . "svn-prop.tmp" 2L, 149C[1;1H ~ [4;1H~ [5;1H~ [6;1H~ [7;1H~ ... (It may be hard to tell from the representation, but it's a horrible, ugly mess.) With VISUAL set to "emacs -nw", I get $ svn propedit svn:externals . emacs: Terminal type "dumb" is not powerful enough to run Emacs. It lacks the ability to position the cursor. If that is not the actual type of terminal you have, use the Bourne shell command `TERM=... export TERM' (C-shell: `setenv TERM ...') to specify the correct type. It may be necessary to do `unset TERMINFO' (C-shell: `unsetenv TERMINFO') as well.svn: system('emacs -nw svn-prop.tmp') returned 256 (It works with VISUAL set to just emacs, but only from inside an Emacs X window, not inside a terminal session.) Is there a way to get shell mode to do the right thing here and open up a new buffer on behalf of the command line process?

    Read the article

  • invalid scalar hex value 0x8000000 and over

    - by kioto
    Hi. I found a problem getting hex value from yaml file. It couldn't get hex value 0x80000000 and over. Following is a sample C++ program. // ymlparser.cpp #include <iostream> #include <fstream> #include "yaml-cpp/yaml.h" int main(void) { try { std::ifstream fin("hex.yaml"); YAML::Parser parser(fin); YAML::Node doc; parser.GetNextDocument(doc); int num1; doc["hex1"] >> num1; printf("num1 = 0x%x\n", num1); int num2; doc["hex2"] >> num2; printf("num2 = 0x%x\n", num2); return 0; } catch(YAML::ParserException& e) { std::cout << e.what() << "\n"; } } hex.yaml hex1: 0x7FFFFFFF hex2: 0x80000000 Error message is here. $ ./ymlparser num1 = 0x7fffffff terminate called after throwing an instance of 'YAML::InvalidScalar' what(): yaml-cpp: error at line 2, column 7: invalid scalar Aborted Environment yaml-cpp : getting from svn, March.22.2010 or v0.2.5 OS : Ubuntu 9.10 i386 I need to get hex the value on yaml-cpp now, but I have no idea. Please tell me how to get it another way. Thanks,

    Read the article

  • How to make quicksilver remember custom trigger

    - by corroded
    I am trying to make a custom trigger for my shell/apple script file to run so I can just launch my dev environment at the push of a button. So basically: I have a shell script(and some apple script included) in ~ named start_server.sh which does 3 things: start up solr server start up memcached start up script/server I have a saved quicksilver command(.qs) that opens up start_server.sh(so start_server.sh, then the action is "Run in Terminal") I created a custom trigger that calls this saved qs command. I did that then tested it and it works. I then tried to double check it so I quit quicksilver and when I checked the triggers it just said: "Open (null)" as the action. I set the trigger again and when i restarted QS the same thing happened again. I don't know why but my old custom trigger to open terminal has worked since forever so why doesn't this one work? Here's a screenie of the triggers after I restart QS: http://grab.by/4XWW If you have any other suggestion on how to make a "push button" start for my server then please do so :) Thanks! As an added note, I have already tried the steps on this thread but to no avail: http://groups.google.com/group/blacktree-quicksilver/browse_thread/thread/7b65ecf6625f8989

    Read the article

  • Problem with circular definition in Scheme

    - by user8472
    I am currently working through SICP using Guile as my primary language for the exercises. I have found a strange behavior while implementing the exercises in chapter 3.5. I have reproduced this behavior using Guile 1.4, Guile 1.8.6 and Guile 1.8.7 on a variety of platforms and am certain it is not specific to my setup. This code works fine (and computes e): (define y (integral (delay dy) 1 0.001)) (define dy (stream-map (lambda (x) x) y)) (stream-ref y 1000) The following code should give an identical result: (define (solve f y0 dt) (define y (integral (delay dy) y0 dt)) (define dy (stream-map f y)) y) (solve (lambda (x) x) 1 0.001) But it yields the error message: standard input:7:14: While evaluating arguments to stream-map in expression (stream-map f y): standard input:7:14: Unbound variable: y ABORT: (unbound-variable) So when embedded in a procedure definition, the (define y ...) does not work, whereas outside the procedure in the global environment at the REPL it works fine. What am I doing wrong here? I can post the auxiliary code (i.e., the definitions of integral, stream-map etc.) if necessary, too. With the exception of the system-dependent code for cons-stream, they are all in the book. My own implementation of cons-stream for Guile is as follows: (define-macro (cons-stream a b) `(cons ,a (delay ,b)))

    Read the article

  • Google AppEngine + Local JUnit Tests + Jersey framework + Embedded Jetty

    - by xamde
    I use Google Appengine for Java (GAE/J). On top, I use the Jersey REST-framework. Now i want to run local JUnit tests. The test sets up the local GAE development environment ( http://code.google.com/appengine/docs/java/tools/localunittesting.html ), launches an embedded Jetty server, and then fires requests to the server via HTTP and checks responses. Unfortunately, the Jersey/Jetty combo spawns new threads. GAE expects only one thread to run. In the end, I end up having either no datstore inside the Jersey-resources or multiple, having different datastore. As a workaround I initialise the GAE local env only once, put it in a static variable and inside the GAE resource I add many checks (This threads has no dev env? Re-use the static one). And these checks should of course only run inside JUnit tests.. (which I asked before: "How can I find out if code is running inside a JUnit test or not?" - I'm not allowed to post the link directly here :-|)

    Read the article

  • Calling a WPF Application and modify exposed properties?

    - by Justin
    I have a WPF Keyboard Application, it is developed in such a way that an application could call it and modify its properties to adapt the Keyboard to do what it needs to. Right now I have a file *.Keys.Set which tells the application (on open) to style itself according to that new style. I know this file could be passed as a command line argument into the application. That would not be a problem. My concern is, is there a way via a managed environment to change the properties of the executable as long as they are exposed properly, an example: 'Creates a new instance of the Keyboard Application Dim e_key as new WpfApplication("C:\egt\components\keyboard.exe") 'Sets the style path e_key.SetStylePath("c:\users\joe\apps\me\default.keys.set") e_key.Refresh() 'Applies the style e_key.HideMenu() 'Hides the menu e_key.ShowDeck("PIN") 'Shows the custom "deck" of keyboard keys the developer 'Created in the style application. ''work with events and response 'Clear the instance from memory e_key.close e_key.dispose e_key = nothing This would allow my application to become easily accessible to other Touch Screen Application Developers, allowing them to use my keyboard and keep the functionality they need. It seems like it might be possible because (name of executable).application shows all the exposed functions, properties, and values. I just have never done this before. Any help would be appreciated, thank you in advance.

    Read the article

  • Run arbitrary subprocesses on Windows and still terminate cleanly?

    - by Weeble
    I have an application A that I would like to be able to invoke arbitrary other processes as specified by a user in a configuration file. Batch script B is one such process a user would like to be invoked by A. B sets up some environment variables, shows some messages and invokes a compiler C to do some work. Does Windows provide a standard way for arbitrary processes to be terminated cleanly? Suppose A is run in a console and receives a CTRL+C. Can it pass this on to B and C? Suppose A runs in a window and the user tries to close the window, can it cancel B and C? TerminateProcess is an option, but not a very good one. If A uses TerminateProcess on B, C keeps running. This could cause nasty problems if C is long-running, since we might start another instance of C to operate on the same files while the first instance of C is still secretly at work. In addition, TerminateProcess doesn't result in a clean exit. GenerateConsoleCtrlEvent sounds nice, and might work when everything's running in a console, but the documentation says that you can only send CTRL+C to your own console, and so wouldn't help if A were running in a window. Is there any equivalent to SIGINT on Windows? I would love to find an article like this one: http://www.cons.org/cracauer/sigint.html for Windows.

    Read the article

  • Finding the width of a directed acyclic graph... with only the ability to find parents

    - by Platinum Azure
    Hi guys, I'm trying to find the width of a directed acyclic graph... as represented by an arbitrarily ordered list of nodes, without even an adjacency list. The graph/list is for a parallel GNU Make-like workflow manager that uses files as its criteria for execution order. Each node has a list of source files and target files. We have a hash table in place so that, given a file name, the node which produces it can be determined. In this way, we can figure out a node's parents by examining the nodes which generate each of its source files using this table. That is the ONLY ability I have at this point, without changing the code severely. The code has been in public use for a while, and the last thing we want to do is to change the structure significantly and have a bad release. And no, we don't have time to test rigorously (I am in an academic environment). Ideally we're hoping we can do this without doing anything more dangerous than adding fields to the node. I'll be posting a community-wiki answer outlining my current approach and its flaws. If anyone wants to edit that, or use it as a starting point, feel free. If there's anything I can do to clarify things, I can answer questions or post code if needed. Thanks! EDIT: For anyone who cares, this will be in C. Yes, I know my pseudocode is in some horribly botched Python look-alike. I'm sort of hoping the language doesn't really matter.

    Read the article

  • problem finding a header with a c++ makefile

    - by Max
    Hi. I've started working with my first makefile. I'm writing a roguelike in C++ using the libtcod library, and have the following hello world program to test if my environment's up and running: #include "libtcod.hpp" int main() { TCODConsole::initRoot(80, 50, "PartyHack"); TCODConsole::root->printCenter(40, 25, TCOD_BKGND_NONE, "Hello World"); TCODConsole::flush(); TCODConsole::waitForKeypress(true); } My project directory structure looks like this: /CppPartyHack ----/libtcod-1.5.1 # this is the libtcod root folder --------/include ------------libtcod.hpp ----/PartyHack --------makefile --------partyhack.cpp # the above code (while we're here, how do I do proper indentation? Using those dashes is silly.) and here's my makefile: SRCDIR = . INCDIR = ../libtcod-1.5.1/include CFLAGS = $(FLAGS) -I$(INCDIR) -I$(SRCDIR) -Wall CC = gcc CPP = g++ .SUFFIXES: .o .h .c .hpp .cpp $(TEMP)/%.o : $(SRCDIR)/%.cpp $(CPP) $(CFLAGS) -o $@ -c $< $(TEMP)/%.o : $(SRCDIR)/%.c $(CC) $(CFLAGS) -o $@ -c $< CPP_OBJS = $(TEMP)partyhack.o all : partyhack partyhack : $(CPP_OBJS) $(CPP) $(CPP_OBJS) -o $@ -L../libtcod-1.5.1 -ltcod -ltcod++ -Wl,-rpath,. clean : \rm -f $(CPP_OBJS) partyhack I'm using Ubuntu, and my terminal gives me the following errors: max@max-desktop:~/Desktop/Development/CppPartyhack/PartyHack$ make g++ -c -o partyhack.o partyhack.cpp partyhack.cpp:1:23: error: libtcod.hpp: No such file or directory partyhack.cpp: In function ‘int main()’: partyhack.cpp:5: error: ‘TCODConsole’ has not been declared partyhack.cpp:6: error: ‘TCODConsole’ has not been declared partyhack.cpp:6: error: ‘TCOD_BKGND_NONE’ was not declared in this scope partyhack.cpp:7: error: ‘TCODConsole’ has not been declared partyhack.cpp:8: error: ‘TCODConsole’ has not been declared make: * [partyhack.o] Error 1 So obviously, the makefile can't find libtcod.hpp. I've double checked and I'm sure the relative path to libtcod.hpp in INCDIR is correct, but as I'm just starting out with makefiles, I'm uncertain what else could be wrong. My makefile is based off a template that the libtcod designers provided along with the library itself, and while I've looked at a few online makefile tutorials, the code in this makefile is a good bit more complicated than any of the examples the tutorials showed, so I'm assuming I screwed up something basic in the conversion. Thanks for any help.

    Read the article

  • Protecting critical sections based on a condition in C#

    - by NAADEV
    Hello, I'm dealing with a courious scenario. I'm using EntityFramework to save (insert/update) into a SQL database in a multithreaded environment. The problem is i need to access database to see whether a register with a particular key has been already created in order to set a field value (executing) or it's new to set a different value (pending). Those registers are identified by a unique guid. I've solved this problem by setting a lock since i do know entity will not be present in any other process, in other words, i will not have same guid in different processes and it seems to be working fine. It looks something like that: static readonly object LockableObject = new object(); static void SaveElement(Entity e) { lock(LockableObject) { Entity e2 = Repository.FindByKey(e); if (e2 != null) { Repository.Insert(e2); } else { Repository.Update(e2); } } } But this implies when i have a huge ammount of requests to be saved, they will be queued. I wonder if there is something like that (please, take it just as an idea): static void SaveElement(Entity e) { (using ThisWouldBeAClassToProtectBasedOnACondition protector = new ThisWouldBeAClassToProtectBasedOnACondition(e => e.UniqueId) { Entity e2 = Repository.FindByKey(e); if (e2 != null) { Repository.Insert(e2); } else { Repository.Update(e2); } } } The idea would be having a kind of protection that protected based on a condition so each entity e would have its own lock based on e.UniqueId property. Any idea?

    Read the article

  • How to make use of Grails Dependencies in your IDE

    - by raoulsson
    Hi All, So I finally got my dependencies working with Grails. Now, how can my IDE, eg IntelliJ or Eclipse, take advantage of it? Or do I really have to manually manage what classes my IDE knows about at "development time"? If the BuildConfig.groovy script is setup right (see here), you will be able to code away with vi or your favorite editor without any troubles, then run grails compile which will resolve and download the dependencies into the Ivy cache and off you go... If, however, you are using an IDE like Eclipse or IntelliJ, you will need the dependencies at hand while coding. Obviously - as these animals will need them for the "real time" error detection/compilation process. Now, while it is certainly possible to code with all the classes shining up in bright red all over the place that are unknown to your IDE, it is certainly not much fun... The Maven support or whatever it is officially called lives happily with the pom file, no extra "jar directory" pointers needed, at least in IntelliJ. I would like to be able to do the same with Grails dependencies. Currently I am defining them in the BuildConfig.groovy and additionally I copy/paste the current jars around on my local disk and let the IDE point to it. Not very satisfactory, as I am working in a highly volatile project module environment with respect to code change. And this situation ports me directly into "jar hell", as my "develop- and build-dependencies" easily get out of sync and I have to manage manually, that is, with my brain... And my brain should be busy with other stuff... Thanks! Raoul P.S: I'm currently using Grails 1.2M4 and IntelliJ 92.105. But feel free to add answers on future versions of Grails and different, future IDEs, as the come in...

    Read the article

  • Fatal error with Custom Magento Module on one server but not the other

    - by Jack
    Hi, I am creating my own custom module in Magento and during testing on a Litespeed server (PHP v5.2.14) I am getting a Fatal Error: Call to a member function batch() on a non-object in ../../../BatchController.php on line 25 that was not appearing during testing on another linux server and a wamp server (PHP v5.2.11). This one has stumped me. I am guessing it has something to do with the server configuration rather than the code itself. But i am just guessing. I was hoping someone here could tell me. The only real major difference I could see, aside from the php versions and environment, is that the server that the error is on is using the Suhosin Patch. But would that be something that could cause this? The line in question is Mage::getModel('mymodule/mymodel')->batch(); which is enclosed in an IF statement. batch() is a public function located in my model file. If you need more code let me know. Thanks!

    Read the article

  • How do you use stl's functions like for_each?

    - by thomas-gies
    I started using stl containers because they came in very handy when I needed functionality of a list, set and map and had nothing else available in my programming environment. I did not care much about the ideas behind it. STL documentations were only interesting up to the point where it came to functions, etc. Then I skipped reading and just used the containers. But yesterday, still being relaxed from my holidays, I just gave it a try and wanted to go a bit more the stl way. So I used the transform function (can I have a little bit of applause for me, thank you). From an academic point of view it really looked interesting and it worked. But the thing that boroughs me is that if you intensify the use of those functions, you need 10ks of helper classes for mostly everything you want to do in your code. The hole logic of the program is sliced in tiny pieces. This slicing is not the result of god coding habits. It's just a technical need. Something, that makes my life probably harder not easier. And I learned the hard way, that you should always choose the simplest approach that solves the problem at hand. And I can't see what, for example, the for_each function is doing for me that justifies the use of a helper class over several simple lines of code that sit inside a normal loop so that everybody can see what is going on. I would like to know, what you are thinking about my concerns? Did you see it like I do when you started working this way and have changed your mind when you got used to it? Are there benefits that I overlooked? Or do you just ignore this stuff as I did (and will go an doing it, probably). Thanks. PS: I know that there is a real for_each loop in boost. But I ignore it here since it is just a convenient way for my usual loops with iterators I guess.

    Read the article

  • Call .NET Webservice with Android

    - by Lasse P
    Hi, I know this question has been asked here before, but I don't think those answers were adequate for my needs. We have a SOAP webservice that is used for an iPhone application, but it is possible that we need an Android specific version or a proxy of the service, so we have the option to go with either SOAP or JSON. I have a few concerns about both methods: SOAP solution: Is it possible to generate java source code from a WSDL file, if so, will it include some kind of proxy class to invoke the webservice and will it work in the Android environment at all? Google has not provided any SOAP library in Android, so i need to use 3rd party, any suggestion? What about the performance/overhead with parsing and transmitting SOAP xml over the wire versus the JSON solution? JSON solution: There is a few classes in the Android sdk that will let me parse JSON, but does it support generic parsing, like if I want the result to be parsed as a complex type? Or would I need to implement that myself? I have read about 2 libraries before here on Stackoverflow, GSON an Jackson. What is the difference performance and usability (from a developers perspective) wise? Do you guys have any experince with either of those libraries? So i guess the big question is, what method to go with? I hope you can help me out. Thanks in advance :-)

    Read the article

  • What exactly can "Full Control" with SharePoint Designer accomplish?

    - by Brian L.
    I've been brought in as an intern to develop a SharePoint site. My team won't authorize the budget for Visual Studio and I don't have physical or remote access to the SharePoint server (running Windows SharePoint Services 3.0 a.k.a. WSS) on the back-end. So what exactly can I do? I'm a pretty decent programmer when it comes to web technologies like PHP, JS and the obvious HTML and CSS. In an environment like this locked-down SharePoint though, I'm stumped trying to figure out how much control I have with MS's definition of "Full Control". If I figured out a way to write some C#, I'm pretty sure I could handle my own, but as I said no Visual Studio for me. Any good ideas of features that people will use on a site built with the limited functionality of WSS and SharePoint Designer with "Full Control"? Can I somehow manipulate the default Web Parts into something cool or useful? Are there Ajax tricks I can do to accomplish something on the back-end? Thanks in advance, I'm new to StackOverflow and very anxious to get involved here!

    Read the article

< Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >